Removed in b787581c9c as it's comment
noted it was bad code, the reason for it's necessity was no longer valid.
Add this back with comment explaining why it's still needed.
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
Mainly:
* Make `ED_operator_object_active_editable_ex` properly report poll
messages on failure.
* Add `ED_operator_object_active_local_editable_posemode_exclusive` for
bone constraints requiring pure local Object (non-override one).
* General cleanup and adding more poll messages on failures.
Creating a new full screen area had it's area initialized as empty,
updating the screen then set the area to a 3D view (as a fallback),
before the actual area type was set.
This made setting the intended space-type run the 3D views exit callback
on a 3D view without a View3D struct allocated, which the exit callback
needed to account for.
Resolve by calling ED_screen_change after the area type has been set.
This patch makes the "Render" window a top-level window, not a child of
the main window, which was the case in blender versions prior to 2.93.
This means it is no longer "on top", nor is the icon grouped on the
taskbar in the same way, but you can Alt-Tab between it and the main
window. This change only affects the Windows platform as the other
platforms behave this way.
See D11576 for links to negative feedback that prompts this change.
Differential Revision: https://developer.blender.org/D11576
Reviewed by Brecht Van Lommel
When using large sequences including audio the drawing of the audio on
top of the strip takes a lot of time. This effects the playback
performance heavily.
During the animation playback performance there was a solution for this
by only drawing the playhead overlay. This was reverted for the sequence
editor as it didn't update the color strips when they were animated.
This patch checks if there are animated color strips if so the full
screen is redrawn, otherwise only the playhead is redrawn.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D11580
The term direction was used in 3 different ways in screen editing code,
making it hard to follow:
- 0-3 for as magic numbers mapped to [west,north,east,south].
- `h`, `v` characters for [horizontal,vertical] axes.
- Cycle direction SPACE_CONTEXT_CYCLE_PREV, SPACE_CONTEXT_CYCLE_NEXT
The following changes have been made:
- Add `eScreenDir` for [west,north,east,south], use variable name `dir`.
- Add `eScreenAxis` for [horizontal,vertical] values, use variable name
`dir_axis`.
- Add `eScreenCycle` for existing enum `SPACE_CONTEXT_CYCLE_{PREV/NEXT}`.
- Add macros `SCREEN_DIR_IS_VERTICAL(dir)`,
`SCREEN_DIR_IS_HORIZONTAL(dir)`.
Replacing `ELEM(dir, 1, 3)`, `ELEM(dir, 0, 2)`.
- Move `ED_screen_draw_join_highlight`, `ED_screen_draw_split_preview`
to `screen_intern.h`.
Reviewed By: Severin
Ref D11245
The new "Close Area" operator can let any neighbor replace the area to
be closed. This patch improves the selection of the best, and most-
aligned, neighbor. It maximizes the ratio of the shared edge lengths,
rather than minimize the absolute amount of misalignment. This follows
our expectations closer because it takes into account the relative
sizes of the areas and their edges.
see D11143 for details and examples.
Differential Revision: https://developer.blender.org/D11143
Reviewed by Campbell Barton
Removing mid-operation area re-targeting for safety and predictability.
Differential Revision: https://developer.blender.org/D11066
Reviewed by Campbell Barton
The RGN_TYPE_EXECUTE region was zero height - with the "Load & Save"
button drawing outside of those bounds - so it didn't respond to events.
This is because the region started off this size and does not change
with simply adding the buttons. Although it has RGN_FLAG_DYNAMIC_SIZE,
delayed reinit of regions is only currently supported on headers.
This gives the execute region an initial (minimum) vertical size but
also makes the region **hidden** by default.
- Showing Prefs as an editor among others it will show the header
but not the execute region.
- Showing the Prefs in a popup window, hides the header region
and shows the execute region.
Ref D10636
Move some drawing code from `area.c` and `ed_util.c` into `ed_draw.c`.
This is to support the new generic slider that wil be used in T81785.
No functional changes.
Reviewed By: #animation_rigging, #user_interface, Severin, sybren
Maniphest Tasks: T81785
Differential Revision: https://developer.blender.org/D9313
Refactoring: WM_window_open() that can open different types of windows. 'New Window' with simplified layout.
Differential Revision: https://developer.blender.org/D10419
Reviewed by Brecht Van Lommel
When dropping an asset somewhere, it is appended and then a drop operation is
called to actually add it to the scene based on current context. If this drop
operation fails, the appended data-block is now still in the .blend. The user
may not notice and not expect this.
Instead idea is to rollback any changes done by dropping code if the operation
fails, namely removing the appended data-block again.
Adds a new `cancel()` callback which is called if the drop operator returns
`OPERATOR_CANCELLED` to drop-boxes and a generic function to deal with assets
on drop failure.
Also removes the `free_id_on_error` property of the `NODE_OT_add_group`
operator, which was used as ad-hoc solution to get this same behavior.
This could happen with files saved before ef4aa42ea4, so before global areas
were written to .blend files.
We would just always add the top- and status-bar, even though the screen wasn't
supposed to have them. I'm not entirely sure what caused the further issues
observed there, most code should probably handle the case fine still. But
apparently something didn't.
Steps to reproduce were:
* Open Blender from before ef4aa42ea4 (e.g 2.91 release)
* In 3D View, View > Area > Toggle Fullscreen Area
* Save the file
* Open the saved file (can be in newer version too)
The fullscreen is corrupt now, especially noticable after duplicating the
workspace.
Passing 4x arguments for the rectangle,
mixed in with round-box radius & color wasn't very readable.
Instead, pass a `rctf` as the first argument to UI box drawing functions.
These functions with many arguments can be unwieldy. Aside from the obvious issues
with rewriting the list of arguments and the opportunities for error and frustration
that presents, the long list of arguments make these systems hard to change. So when
an argument should be added, someone might skip that and add some hack instead.
So, as proposed in T73586#1037210, this patch instead uses a "params" struct for
each of these callbacks.
- Use param argument for `ARegionType.listener`
- Remove unused window field in region listener
- Use param argument for `SpaceType.listener`
- Use params struct for `ARegionType.message_subscribe`
Differential Revision: https://developer.blender.org/D9750
There should be a conversion to native pixel size as expected by GHOST at the
window manager level, the dimensions at screen level do not need a conversion.
Differential Revision: https://developer.blender.org/D9976
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
With the new `ed_util_ops.c` introduced in 2250b5cefe, existing code can be
cleaned up to use it.
* Move new ID preview operators to `ed_util_ops.c`
* Move ED operator registration to `ed_util_ops.c`
* Use doxygen sections in `ed_util_ops.c`
* Rename ID related ED operators to use `ED_OT_lib_id_` prefix.
* Remove unused `#include`s
After 1e799dd26e, the logic to recognize a temporary File Browser window
didn't work correctly anymore. It would recognize a maximized File Browser
inside a temporary window as a temporary File Browser window, and attempt to
close this (rather than returning to the previous layout).
The logic there was pretty weak, and still is I think. A more stable solution
would need bigger refactoring.
With this, it's also not possible to maximize or fullscreen an area within a
temporary window (Preferences, File Browser, render window) anymore. Think that
won't make a noticable difference, since you couldn't open multiple areas there
anyway, and the area seems to be maximized already.
Cleaned up the code a bit to not become more confusing with the changes.
The previous design is rather old and has a couple of problems:
* Scalability: The current solution of adding little icon buttons next to the
data-block name field doesn't scale well. It only works if there's a small
number of operations. We need to be able to place more items there for better
data-block management. Especially with the introduction of library overrides.
* Discoverability: It's not obvious what some of the icons do. They appear and
disappear, but it's not obvious why some are available at times and others
not.
* Unclear Status: Currently their library status (linked, indirectly linked,
broken link, library override) isn't really clear.
* Unusual behavior: Some of the icon buttons allow Shift or Ctrl clicking to
invoke alternative behaviors. This is not a usual pattern in Blender.
This patch does the following changes:
* Adds a menu to the right of the name button to access all kinds of operations
(create, delete, unlink, user management, library overrides, etc).
* Make good use of the "disabled hint" for tooltips, to explain why buttons are
disabled. The UI team wants to establish this as a good practise.
* Use superimposed icons for duplicate and unlink, rather than extra buttons
(uses less space, looks less distracting and is a nice + consistent design
language).
* Remove fake user and user count button, they are available from the menu now.
* Support tooltips for superimposed icons (committed mouse hover feedback to
master already).
* Slightly increase size of the name button - it was already a bit small
before, and the move from real buttons to superimposed icons reduces usable
space for the name itself.
* More clearly differentiate between duplicate and creating a new data-block.
The latter is only available in the menu.
* Display library status icon on the left (linked, missing library, overridden,
asset)
* Disables "Make Single User" button - in review we weren't sure if there are
good use-cases for it, so better to see if we can remove it.
Note that I do expect some aspects of this design to change still. I think some
changes are problematic, but others disagreed. I will open a feedback thread on
devtalk to see what others think.
Differential Revision: https://developer.blender.org/D8554
Reviewed by: Bastien Montagne
Design discussed and agreed on with the UI team, also see T79959.
