Caused by 46aa70cb48.
RNA would send property update notifiers with the owner ID as `reference` data.
Since above's commit we'd only send the notifiers to editors if the reference
data address matches the space's address. So editors wouldn't get the notifiers
at all.
The owner ID for space properties is always the screen AFAIK. So allow
notifiers with the screen as reference to be passed to editors as well, think
this is reasonable to do either way.
For example, steps to reproduce were:
* Open Asset Browser
* Mark some data-blocks of different types as assets (e.g. object & its
material)
* Switch between the categories in the Asset Browser. The asset list wouldn't
be updated.
When adding a notifier, `reference` data can be passed. The notifier system
uses this to filter out listeners, for example if data of a scene changes,
windows showing a different scene won't get the notifiers sent to their
listeners.
For the `NC_SPACE` notifiers, a number of places also passed the space as
`reference`, but that wasn't used at all. The notifier would still be sent to
all listeners in all windows (and the listeners didn't use it either). Causing
some unnecessary updates (e.g. see ed2c4825d3).
With this commit, passing a space will make sure the notifier is only sent to
that exact space. Some code seems to already have expected that to be the case.
However there were some cases that passed the space as `reference` without
reason, which would break with this commit (meaning they wouldn't redraw or
update correctly).
Corrected these so they don't pass the space anymore.
The check for undo-depth increment/decrement assumed a newly loaded
window manager would have a different pointer.
This broke bl_animation_fcurves test indirectly,
the change to undo-depth caused the redo panel to attempt to popup
in background mode - which isn't supported.
Now the pointer is unchanged, the undo-depth is assumed to match
the value used when calling the operator.
The undo-depth is now properly maintained between file loads,
which is an improvement on the original behavior which reset it.
Keep the pointer location from the initial window-manager
between file load operations.
This is needed as the Python API may hold references to keymaps for e.g.
which are transferred to the newly loaded window manager,
without their `PointerRNA.owner_id` fields being updated.
Since there is only ever one window manager, keep the memory at the same location so the Python ID pointers stay valid.
Reviewed By: mont29
Ref D10690
Previously many operations would run on file load, even if the file
did not load. Pre/post load handlers were called, timers canceled,
all undo data freed, editors exited ... etc.
Now keep the blend file in it's current state.
This simplifies updating this area of code as there is one less
possible situation to account for.
Currently file loading performs almost all reloading logic
even in the case loading the file fails, causing the file to be in
a state that isn't well defined: undo is cleared, timers are canceled &
scripts are re-registered.
- Don't set G.relbase_valid until the file is loaded.
- Remove unnecessary string pointer comparison.
- Remove unused filename being passed to 'setup_app_data'.
This adds the initial boilerplate code that is required to introduce
the new spreadsheet editor. The editor is still hidden from the ui.
It can be made visible by undoing the change in `rna_screen.c`.
This patch does not contain any business logic for the spreadsheet editor.
Differential Revision: https://developer.blender.org/D10645
Ref T86279.
The handle of a drawing callback can be removed within the drawing function itself.
This causes `var = (type)(((Link *)(var))->next` to read an invalid memory value in C.
Add an RNA function `activate_asset_by_id(asset_id: ID, deferred: bool)`
to the File Browser space type, which intended to be used to activate an
asset's entry as identified by its `ID *`. Calling it changes the active
asset, but only if the given ID can actually be found.
The activation can be deferred (by passing `deferred=True`) until the
next refresh operation has finished. This is necessary when an asset has
just been added, as it will be loaded by the filebrowser in a background
job.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10549
These variables track the wmWindow.event_queue state,
however they were used in a way that wasn't correct.
- check_drag & check_click from wmWindow.eventstate
were used to track the click/drag status of events handled in
wmWindow.event_queue.
- Event's in the queue read from wmEvent.check_drag.
- Once a drag action was detected, wmWindow.eventstate.check_drag
was disabled.
Disabling drag in the event state would not change the drag state
for values already in the event queue.
Simplify logic by moving these values into the window,
so there is one place these variables are tracked.
The `MAX_LIBARRAY` define was an annoying doublon to the `INDEX_ID_MAX` enum value
now defined in `DNA_ID.h`, and it is no more useful.
And comments were somewhat outdated. Also added an explanation about
chosen order for the `INDEX_ID_<IDTYPE>` order.
In Blender, we used to use the term 'draw' to refer to information
displayed to the user. For version 2.80, it was decided to change these
instances to 'display' instead. This was to avoid the ambiguity between
end-user drawing tools and display options.
From the Oxford English Dictionary:
- Draw: produce (a picture or diagram) by making lines and marks on
paper with a pencil, pen, etc.
- Display: show (data or an image) on a computer, television, or
other screen.
Therefore, we should use draw when referring to drawing tools for
making marks, but use display when referring to information
shown/displayed to the user. From a user POV, the computer displays
certain information, whereas the user draws a mark.
Apparently this change was not implemented consistently, so this patch
changes all remaining relevant instances of "draw".
Differential Revision: https://developer.blender.org/D10551
1638af109e &
bfc70a6a95
caused a regression with click-drag (not tweak which has it's own logic).
Restore some changes from these commits with added comments.
Minor changes from previous functionality from
39919e3532.
- `prevval` & `prevtype` are now set for all kinds of new events
in the queue previously this was not done for some kinds of events
(mouse wheel, ndof - for example).
- Set `prevval` & `prevtype` for other windows for mouse buttons.
This check was added before is_repeat was supported, use this variable
instead since it's more a more reliable way of detecting held keys.
Also remove outdated comment.
Click detection logic relied on the event queue not accumulating events
as newly added events at the end of the queue adjusted
`wm->eventstate->prev{val/type}` which was then compared with events
at the front of the queue.
This made Ctrl-Click fail to detect the click as releasing Ctrl
set the previous value before the previous event was handled.
In practice this only happened in heavy scenes,
updating 10 fps or lower. It also made automated tests fail that
accumulate events before handling them.
This makes event's prevval and prevtype usable for events in the queue.
Previously they were unused, except as a hack for modal keymap handling.
This is needed to fix T86116, where the `wm->eventstate->prev{val/type}`
are set to values from events that have not been processed.
Currently the intended behavior regarding prevval/prevtype isn't
handled consistently. However, including cursor motion causes events
in `wm->queue` and `wm->eventstate` to behave differently,
where `wm->eventstate` ignores motion (necessary for click detection).
This makes checks from `wm->eventstate` to events in the queue fail.
This reverts 39919e3532,
using the `event.type` instead of it's previous type.
This works as it includes mouse button release events.
This concerns currently only collections (`master_collection` of scenes)
and root node trees. It removes the matching type-specific helpers
(`BKE_collection_master_scene_search` and `BKE_node_tree_find_owner_ID`).
No functional change expected here.
NOTE: Current implementation of `owner_get` is far from optimal, we
could probably do it better, see {T69169}.
NOTE: While it could also have it, shapekeys IDTypeInfo was left out of
this change for now. Mainly because it sould not be used currently, and
we ultimately want to demote shape keys from ID status anyway.
Changes include using proper and consistent grammar, simplifying
phrasing, using correct terminology, and not including python API
identifiers in tooltips.
Differential Revision: https://developer.blender.org/D9924
When closing the blender, while the callbacks are removed, the
reference count of the object used as `customdata` is not decremented.
This commit adds two functions that correctly release the
python `draw_callbacks` before releasing all `draw_callbacks`.
Differential Revision: https://developer.blender.org/D10478
Constraint of new window position can be incorrect when using multiple monitors.
Differential Revision: https://developer.blender.org/D10469
Reviewed by Brecht Van Lommel
Removal of 'camera frame' around blend file thumbnail images.
Differential Revision: https://developer.blender.org/D10490
Reviewed by Brecht Van Lommel
Refactoring: WM_window_open() that can open different types of windows. 'New Window' with simplified layout.
Differential Revision: https://developer.blender.org/D10419
Reviewed by Brecht Van Lommel
When opening a Blender version for which there are no preferences, the splash
shows a button like "Load 2.92 Settings". Using this could cause a memory leak
of the storage for recently opened files.
The "quick setup" dialog is actually a 'menu', and the "splash screen" block
contains the UI_BLOCK_LOOP flag which causes the buttons' text to align
to the left, however, usually regular buttons have centered text.
As a workaround, add the UI_BLOCK_QUICK_SETUP flag which prevents
the text from being left-aligned.
Differential Revision: https://developer.blender.org/D10486
Reviewed by: Julian Eisel
