Adds a pie menu to the File Browser for convenient switching between vertical list, horizontal list and thumbnail view.
Uses the same shortcut as other View pie menus (`ACCENT_GRAVE`).
{F12811673}
Reviewed By: #user_interface, pablovazquez, Severin
Differential Revision: https://developer.blender.org/D13874
Since [0] (fix for T95591), the tweak tools fallback action used tweak
instead of press.
This was enabled so tools such as "Measure" & "Add Cube" could use
fallback tools (otherwise is wasn't possible to add a new ruler without
also selecting for e.g.), however this is of limited use since both
tools support dragging anywhere to activate, making them less useful
with other selection tools beside tweak (box/lasso for e.g.).
Resolve by disabling the fallback option for tools where using the
tweak tool to select is undesirable. Selection by clicking with
"Measure" & "Add Cube" is still supported as this is also set in the
3D view's key-map.
[0]: 0e51defcf4
Add specific modal keyitem for Vert/Edge Slide or TrackBall.
Note that there is a workround to avoid repeated keys in the status bar.
Reviewed By: campbellbarton
Maniphest Tasks: T100129
Differential Revision: https://developer.blender.org/D15597
Fix the issue where undoing a "duplicate NLA strip" operation would
require two undo steps.
The cause of this was that the operator was not using the operator macro
system to combine both the duplication and the translate operators into
one. Instead, the old code was simply manually invoking invoking the
translate operator after the duplicate operator had completed.
This patch requires the default keymap to be modified to include the two
new macro operators, `NLA_OT_duplicate_move` and
`NLA_OT_duplicate_linked_move` in favour of the old keymap that simply
called `NLA_OT_duplicate` and passed along a `linked` argument.
`duplicate_move` and `duplicate_move_linked` are two different enough
operations to justify having their own operators from user's
point-of-view, especially since we cannot yet have different tool-tips
based on an operator's settings.
Reviewed By: sybren, mont29
Differential Revision: https://developer.blender.org/D15086
With choices Default, Lower Memory and Faster Render. For convenience, and
to help communicate what the various settings do.
Differential Revision: https://developer.blender.org/D15446
Add a 'Delete Confirmation' operator property to the 'Delete Marker'
operator. This determines whether the user is asked to confirm the
deletion or not.
Defaults so that only {key X} ({key Backspace} for industry compatible
keymap) prompts for deletion, whereas {key Del} does not show the
confirmation popup.
This also makes the default keymap for marker deletion consistent with
the common delete operators (such as objects and keyframes).
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D13818
In some cases it is mandatory to be able to hide parts of the mesh
in order to paint certain areas. The Mask modifier doesn't work in
weight paint, and edit mode hiding requires using selection, which
is not always convenient.
This makes the weight and vertex paint modes always respect edit mode
hiding like sculpt mode. The change in behavior affects drawing and
building paint PBVH. Thus it affects brushes, but not menu operators
like Smooth or Normalize.
In addition, this makes the Alt-H shortcut available even without
any selection enabled, and implements Hide for vertex selection.
Differential Revision: https://developer.blender.org/D14163
* Minimum Distance -> Distance Mix
* Max Count -> Count Max
* Shift + A for selection grow
This follows better the names we have in geometry nodes in the Distribute Points
node when using the Poisson Disk method (Distance Min, Distance Max).
The shortcut for the selection grow is the same we use in mesh sculpt
for the Expand Mask operator (which behaves a bit similar).
This commit contains various new features for curves sculpt mode
that have been developed in parallel.
* Selection:
* Operator to select points/curves randomly.
* Operator to select endpoints of curves.
* Operator to grow/shrink an existing selection.
* New Brushes:
* Pinch: Moves points towards the brush center.
* Smooth: Makes individual curves straight without changing the root
or tip position.
* Puff: Makes curves stand up, aligning them with the surface normal.
* Density: Add or remove curves to achieve a certain density defined
by a minimum distance value.
* Slide: Move root points on the surface.
Differential Revision: https://developer.blender.org/D15134
Issue was that the Industry Compatible keymap wouldn't select files on a
mouse press, and since the dragged items are determined by the
selection, nothing would be considered as dragged.
Selecting items on mouse press happens since c606044157. I haven't
heard of that issue happening in the Industry Compatible keymap. But if
it did happen, it should be fixed too now.
This allows using a shortcut from the file browser to edit the directory
path. The shortcut Ctrl + L is quite standard and used in multiple
GNU/Linux desktop desktop environments, Windows, as well as most web
browsers. Safari on macOS uses Cmd + L.
Reviewed by: Jacques Lucke, Julian Eisel
Differential Revision: https://developer.blender.org/D15196
* Add a new keymap for `curves.*` operators. This is mainly for
edit mode operators, but since we don't have edit mode yet,
these operators are also exposed in sculpt mode currently.
* Fix the naming of the "sculpt curves" keymap.
The tweak tool was toggling node selection twice, as the selection
key-map is already accounted for in the node key-map there is no need
to duplicate the actions in the tweak tool.
This commit adds a float selection to curve control points or curves,
a sculpt tool to paint the selection, and uses the selection influence
in the existing sculpt brushes.
The selection is the inverse of the "mask" from mesh sculpt mode
currently. That change is described in more detail here: T97903
Since some sculpt tools are really "per curve" tools, they use the
average point selection of all of their points. The delete brush
considers a curve selected if any of its points have a non-zero
selection.
There is a new option to choose the selection domain, which affects how
painting the selection works. You can also turn the selection off by
clicking on the active domain.
Sculpt brushes can be faster when the selection is small, because
finding selected curves or points is generally faster than the
existing brush intersection and distance checks.
The main limitation currently is that we can't see the selection in the
viewport by default. For now, to see the selection one has to add a
simple material to the curves object as shown in the differential
revision. And one has to switch to Material Preview in the 3d view.
Differential Revision: https://developer.blender.org/D14934
Use the same method for node selection and dragging that is used
in the 3D viewport and UV editor. Instead of relying on a modal
operator - use the keymap to handle click/drag events.
Details:
Failure to transform unselected nodes was caused by [0] & [1] however
detecting drag relied on specific behavior which I don't think we should
be depending on.
This error happened when selection was defined both in the key-map for
the tool and for the node-editor.
- The left mouse button would activate selection in both the tool
and "Node Editor" keymap.
- The first selection would return `FINISHED | PASS_THROUGH` when
selecting a previously unselected node.
- The same PRESS would trigger a second selection would return
`RUNNING_MODAL | PASS_THROUGH`,
(starting a NODE_OT_select as a modal operator).
- In 3.1 (with tweak events) the modal operator would then exit and
fall-back to the tweak event which would transform the selected
nodes.
- In 3.2 (as of [0]) the PRESS that starts the modal operator is
considered "handled" and prevents drag event from being detected.
The correct behavior in this case isn't obvious:
If a modal operator starts on pressing a button, using that same the
release to generate drag/click events is disputable.
Even in the case or 3.1 it was inconsistent as tweak events were
generated but click events weren't.
Note: after investigating this bug it turns out a similar issue already
existed in 2.91 and all releases afterwards. While the bug is more
obscure, it's also caused by the tweak event being interrupted as
described here, this commit resolves T81824 as well.
[0]: 4d0f846b93
[1]: 4986f71848
Reviewed By: Severin
Ref D14499
This patch adds the show_gizmo and show_gizmo_navigate properties to the Image and UV editors.
Image Editor:
{F13026317}
UV Editor:
{F13026319}
VIDEO:
{F13026324}
Reviewed By: #user_interface, campbellbarton
Differential Revision: https://developer.blender.org/D14755
Now it's possible to use auto masking at 3 levels:
* Stroke
* Layer
* Material
The masking options can be combined and allows to limit the effect of the sculpt brush.
Diff Revision: https://developer.blender.org/D14589
Add a new operator, "Start Tweaking Strip Actions (Full Stack)", which
allows you to insert keyframes and preserve the pose that you visually
keyed while upper strips are evaluating,
The old operator has been renamed from "Start Tweaking Strip Actions" to
"Start Tweaking Strip Actions (Lower Stack)" and remains the default for
the hotkey {key TAB}.
**Limitations, Keyframe Remapping Failure Cases**:
1. For *transitions* above the tweaked strip, keyframe remapping will
fail for channel values that are affected by the transition. A work
around is to tweak the active strip without evaluating the upper NLA
stack.
It's not supported because it's non-trivial and I couldn't figure it
out for all transition combinations of blend modes. In the future, it
would be nice if transitions (and metas) supported nested tracks
instead of using the left/right strips for the transitions. That
would allow the transitioned strips to overlap in time. It would also
allow N strips to be part of the (previously) left and right strips,
or perhaps even N strips being transitioned in sequence (similar to a
blend tree). Proper keyframe remapping through all that is currently
beyond my mathematical ability. And even if I could figure it out,
would it make sense to keyframe remap through a transition?
//This case is reported to the user for failed keyframe insertions.//
2. Full replace upper strip that contains the keyed channels.
//This case is reported to the user for failed keyframe insertions.//
3. When the same action clip occurs multiple times (colored Red to
denote it's a linked strip) and vertically overlaps the tweaked
strip, then the remapping will generally fail and is expected to
fail.
I don't plan on adding support for this case as it's also non-trivial
and (hopefully) not a common or expected use case so it shouldn't be
much of an issue to lack support here.
For anyone curious on the cases that would work, it works when the
linked strips aren't time-aligned and when we can insert a keyframe
into the tweaked strip without modifying the current frame output of
the other linked strips. Having all frames sampled and the strip
non-time aligned leads to a working case. But if all key handles are
AUTO, then it's likely to fail.
//This case is not reported to the user for failed keyframe
insertions.//
4. When using Quaternions and a small strip influence on the tweaked
Combine strip. This was an existing failure case before this patch
too but worth a mention in case it causes confusion. D10504 has an
example file with instructions.
//This case is not reported to the user for failed keyframe insertions. //
5. When an upper Replace strip with high influence and animator keys to
Quaternion Combine (Replace is fine). This case is similar to (4)
where Quaternion 180 degree rotation limitations prevent a solution.
//This case is not reported to the user for failed keyframe insertions.//
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D10504
F2 allows renaming lots of different types of active items, and now it
also works for markers.
Before, Ctrl+M was used, and it's context-sensitive: you often get
"Mirror Keys" instead, when your cursor isn't on the markers region, and
that operator has nothing to do with either renaming or markers.
**What this commit does:**
- Replace Ctrl+M shortcut with F2.
- Adds the `TOPBAR_PT_name_marker` panel which is implemented similar
to the global rename panel. This having to press enter twice to
confirm or escape twice to cancel, which would happen if the
`marker.rename` operator was called directly.
- Replace usages of `marker.rename` in the UI with `wm.call_panel`.
- To make the Industry Compatible keymap consistent with Blender
Default, the rename shortcut only works when hovering the markers
area.
Reviewed By: ChrisLend, sybren
Differential Revision: https://developer.blender.org/D12298
Use Alt-Slash to remove objects from local-view (was M prior to [0]),
following the convention of using Alt to perform the reverse of an
action. Also remove the confirmation menu as this key as it can be
undone and it's not likely to be pressed by accident.
This can be useful to quickly subtract items from a complex selection
with items that only become visible when entering local-view.
The M key was originally used in 2.4x since moving between layers wasn't
possible. Now moving between collections is possible in local-view
the keys collided.
[0]: cf5d582b77
This behaviour was introduced in a687d98e67 to bring the old obscure
"M" operator to remove objects from the local view. In order to avoid
the keymap clash with the Move to Collection operator, the Move to
Collection was artificially restricted to work in local view.
In retrospect, the "Remove from Local View" operator is in the menu anyways,
so it didn't even need to have a shortcut (back in 2.79 the operator was
not in a menu).
The changes introduced here are:
* No shortcut for "Remove from Local View"
* No more restrictions to "Move/Link to Collection" from local view.
Thanks for Philipp Oeser for digging the old commit that introduced this
and for the rationale on the changes.
color attribute system.
This commit removes sculpt colors from experimental
status and unifies it with vertex colors. It
introduces the concept of "color attributes", which
are any attributes that represents colors. Color
attributes can be represented with byte or floating-point
numbers and can be stored in either vertices or
face corners.
Color attributes share a common namespace
(so you can no longer have a floating-point
sculpt color attribute and a byte vertex color
attribute with the same name).
Note: this commit does not include vertex paint mode,
which is a separate patch, see:
https://developer.blender.org/D14179
Differential Revision: https://developer.blender.org/D12587
Ref D12587
This adds a new Grow/Shrink brush which is similar to the Length
brush in the old hair system.
* It's possible to switch between growing and shrinking by hold
down ctrl and/or by changing the direction enum.
* 3d brush is supported.
* Different brush falloffs are supported.
* Supports scaling curves uniformly or shrinking/extrapolating
them. Extrapolation is linear only in this patch.
* A minimum length settings helps to avoid creating zero-sized curves.
Differential Revision: https://developer.blender.org/D14474
This experimental preference was not making much difference with
selection set to left-mouse for the 3D view and UV editor. Now dragging
the existing selection is possible when this preference is enabled.
Remove much of the old legacy pose library:
- Remove from the Pose & Armature menus.
- Remove from the default keymap.
- Pose Library panel in Armature properties: Add "(legacy)" to title.
- Add note that the functionality of that panel is obsolete, with a
button that opens the manual on the chapter of the new pose library.
- Add button to convert the selected legacy pose library to pose assets.
- The rest of the functionality is greyed out to further communicate
it's been deprecated. It's still functional, though.
Ref: T93405
Add edge panning feature to transform operator. It works in same way as
in node editor, but Y axis is limited by usable range up to 128
channels.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14310
This patch adds channel region to VSE timeline area for drawing channel
headers. It is synchronizedwith timeline region. 3 basic features are
implemented - channel visibility, locking and name.
Channel data is stored in `SeqTimelineChannel` which can be top-level
owned by `Editing`, or it is owned by meta strip to support nesting.
Strip properties are completely independent and channel properties are
applied on top of particular strip property, thus overriding it.
Implementation is separate from channel regions in other editors. This
is mainly because style and topology is quite different in VSE. But
also code seems to be much more readable this way.
Currently channels use functions similar to VSE timeline to draw
background to provide illusion of transparency, but only for background
and sfra/efra regions.
Great portion of this patch is change from using strip visibility and
lock status to include channel state - this is facilitated by functions
`SEQ_transform_is_locked` and `SEQ_render_is_muted`
Originally this included changes in D14263, but patch was split for
easier review.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D13836
