Issue happened for scene. movie clip and mask strips, which contains
pointers to datablocks which are freeing on loading new file.
Also, scene strip would crash when pasted from clipboard after scene
was unlinked from file.
Before this change only old flag "Premultiply" was used to
detect alpha mode, which is not enough actually.
Now the logic here is:
- If "Premultiply" was enabled it is likely float image with
straight alpha, which shall be premultiplied before usage.
In this case image/sequence Alpha Mode is set to Straight.
- Otherwise use default alpha mode for image format based on
an extension. This could fail in some cases like TIFF, but
this wasn't handled fully correct in older blender anyway.
Initial discovered issue was that EXR images saved in older
Blender versions were set to Straight alpha mode, which is
obviously a straight way to lots of headache.
The issue was caused by SEQ_BEGIN macro modifying sequence's depth
which ruined transformation routines. Used own DFS instead which
doesn't modify sequences.
Also corrected some typos in api and comments.
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
This avoids having bunch of cached images when doing animation rendering,
keeping all the memory available for rendered itself.
This keeps memory usage low when rendering huge edits with mixed
scenes and movie strips.
This should not affect on sped of video encoding, which was confirmed by
some own tests.
--
svn merge -r50051:50052 ^/branches/soc-2011-tomato
This means that modifier would operate on buffer which was passed to it,
without creating copy of image buffer and operating on it.
All current modifiers fit into this model and if it would need to have
original buffer on modifier calculation, that particular modifier can
create copy.
Gives some percentage of boost.
This implements basic color grading modifiers in sequencer, supporting
color balance, RGB curves and HUE corrections.
Implementation is close to object modifiers, some details are there:
http://wiki.blender.org/index.php/User:Nazg-gul/SequencerModifiers
Modifiers supports multi-threaded calculation, masks and instant
parameter changes.
Also added cache for pre-processed image buffers for current frame,
so changing sequence properties does not require rendering of original
sequence (like rendering scene, loading file from disk and so)
This implements option which could be used to color balance only
specified area. Currently done by adding Mask input to Adjustment
effect. Affects on color balance and multiply settings.
Supporting masked saturation control is in the list, not supported
in this commit.
Also show value slider in the right of color wheel.
Added a framework to run effects in several threads. Port most
of effects to this new framework.
Still some work to be done here (some effects are not so easy to port)
Before this the the whole sequencer cache would be invalidated
when hanging sequence settings.
This was completely annoying because changing color balance
settings would re-load image file for which color balance
is happening on every change,
In fact it's still an issue if color balance is changing for
image strip itself, but if this strip has got effect and
color balance is changing for it file wouldn't be reloaded.
* Remove all code for Texture and Sequencer plugin system, this never worked in 2.5x / 2.6x and is therefore not needed anymore.
* DNA structures are kept, all read/writefile code is gone.
... instead add scene.sequencer_editor_create / clear, these match id.animation_data_* functions.
- refactor for names, for scene level functions call them BKE_sequencer_*
After discussion with Campbell we found much nicer solution which
keeps operation with data much more clear:
- Refresh Sequencer is totally harmless, do not touch actual data
and just removes everything from cache
- Reload Strip will reload data and adjust it's length for all
selected strips without affecting on length of strip itself
- Reload Strip and Adjust length will do the same but will also
adjust length of strip itself.
This adds movieclip input support to the sequencer, thereby making
undistorted and stabilized footage available without a seperate render step.
Also: removes some old cruft code from the sequencer:
* new_tstripdata wasn't used anymore
* StripElems were allocated for SCENE strips on full length, wasting memory
Added a comment, that hopefully makes things a little bit clearer:
StripElems are *only* usefull for MOVIE + IMAGE strips for all other strip
types one can set this pointer to NULL. (If that should cause otherwise
problems, then the code that doesn't check for NULL is to blame!)
added some missing functions too - which are not used yep but should be there for api completeness.
* CDDM_set_mloop
* CDDM_set_mpoly
* BLI_mempool_count
Split proxy build operator into three parts:
- Prepare context (IMB_anim_index_rebuild_context) which prepares all
needed data and stores it in an anonymous structure used by specific
builder lately.
- Build proxies/timecodes into temporary files (IMB_anim_index_rebuild)
This function will build all selected proxies/timecodes into a temporary
files so old proxies will be still available during building.
- Finish building proxies (IMB_anim_index_rebuild_finish) which copies
temporary files over old proxies filed and releases all resources used
by a context.
Context creation and finishing building happens in a main thread so
it's easy and safe to close all opened handles of proxies files and
refresh cache after rebuilding is finished.
This should finally fix#30315: Temporary proxy files are not erased and old proxys are not updated if the proxy is built more then once (windows)
This commit extends limit of ID and objects to 64 (it means 63 meaning
characters and 1 for zero-terminator). CustomData layers names are also
extended.
Changed DNA structures and all places where length constants were hardcoded.
All names which are "generating" from ID block should be limited by MAX_ID_NAME-2,
all non-id names now has got own define called MAX_NAME which should be used all
over for non-id names to make further name migration stuff easier.
All name fields in DNA now have comment with constant which corresponds to
hardcoded numeric value which should make it easier to further update this
limits or even switch to non-hardcoded values in DNA.
Special thanks to Campbell who helped figuring out some issues and helped a lot
in finding all cases where hardcoded valued were still used in code.
Both of forwards and backwards compatibility is stored with blender versions newer
than January 5, 2011. Older versions had issue with placing null-terminator to
DNA strings on file load which will lead to some unpredictable behavior or even
crashes.
"The Blender Foundation also sells licenses for use in proprietary software under the Blender Licens"
also remove NaN references from files that have been added since blender went opensource.
