Improve the "In Betweens" tools:
- Push Pose from Rest Pose
- Relax Pose to Rest Pose
- Push Pose from Breakdown
- Relax Pose to Breakdown
- Pose Breakdowner
These all now use the same new sliding tool:
- Actual visual indication of the blending/pushing percentage applied.
- Mouse wrapping to allow for extrapolation without having to worry
about the initial placement of the mouse. This also means these tools
are actually usable when chosen from the menu.
- Precision mode by holding {key Shift}.
- Snapping to 10% increments by holding {key Ctrl}.
- Overshoot protection; by default the tool doesn't allow overshoot
(lower than 0% or higher than 100%), and it can be enabled by pressing
{key E}.
- Bones are hidden while sliding, so the pose itself can be seen more
clearly. This can be toggled by pressing {key H} while using the tool.
Reviewed By: #animation_rigging, zeddb, sybren, #user_interface, brecht, Severin, looch
Maniphest Tasks: T81836
Differential Revision: https://developer.blender.org/D9054
Sculpting tools are designed to ignore hidden geometry and behave like
hidden geometry does not exist.
When getting the neighbors of a vertex, now this takes into account
hidden geometry to avoid returing neighbors which connected edge is not
visible. This should make corner cases of a lot of tools work properly,
especially when working in low poly meshes when is common to have a
single face loop hidden.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D11007
When using a tool that is not a brush, the previously used brush
preset will still be active in the tool settings, so the cursor will
draw its custom reviews.
This checks if the current active tool is a brush before drawing its
previews. If it is not a brush tools, it draws a default white cursor.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9418
This is very similar to rB5613c61275fe6 and rB0061150e4c90d, basically
just exposing a `VMutableArray` method to its generic counterpart. This
is quite important for curve point attributes to avoid a lookup for
every point when there are multiple splines.
An emission texture is currently connected to the Base Color socket. It should connect to the Emission socket, like a constant does.
Reviewed By: gaiaclary
Differential Revision: https://developer.blender.org/D10990
link->multi_input_socket_index, which is used to calculate the links
position on the multi-input socket, was not set.
Now it is set to the sockets current link count.
Review: Jacques Lucke (JacquesLucke)
Differential Revision: https://developer.blender.org/D11082
Heterogeneous lookup is useful when constructing a key in a
map/set is relatively expensive (e.g. `std::string`). When doing
lookups in the map/set, one usually does not want to construct
the type to avoid overhead. Instead, heterogeneous lookup
allows for using a different type (such as `StringRef`) as key.
This change makes it easier to implement heterogeneous
lookup for custom types. Before, one had to specialize
`blender::DefaultHash`. Now, one just has to implement
a `static uint64_t hash_as(value)` on the type itself.
One still has to provide the equality operator in addition
to the hash function of course.
Before, any usage of tbb wrappers used in modifier code would
just fall back to the non-threaded non-tbb version.
We ran into this issue a couple of times in patches.
Sometimes it is useful to find the key that compares equal
to a known key. Typically that happens when the key itself
has additional data attached that is not part of its hash.
Note that the returned key reference/pointer is const, because
the caller must not change the key in a way that changes its
hash or how it compares to other keys.
Unavailable sockets should generally be ignored during evaluation.
They mainly exist because we don't have a better mechanism to turn
some sockets on/off depending on node parameters.
Currently, it is still possible that a link connects an available with an
unavailable socket. This link is not displayed in the ui and should
generally be ignored.
Previously, multiple threads adding information to node ui storage
at the same time resulted in memory corruption. The lock prevents
that, but might potentially become a bottleneck in the future.
For now favour correctness over a potential performance bottleneck.
The new "Close Area" operator can let any neighbor replace the area to
be closed. This patch improves the selection of the best, and most-
aligned, neighbor. It maximizes the ratio of the shared edge lengths,
rather than minimize the absolute amount of misalignment. This follows
our expectations closer because it takes into account the relative
sizes of the areas and their edges.
see D11143 for details and examples.
Differential Revision: https://developer.blender.org/D11143
Reviewed by Campbell Barton
When disk cache path is same as blend file path, with Unix-like systems
blend file can be overwritten by disk cache directory.
This was caused by `BLI_delete(path, false, true)` when path points to
file. On Windows this would result in error message and file would not
be deleted. On Linux, file is deleted and then overwritten with cache
directory.
To further minimize chance of removing blend file, append disk cache
path with `_seq_cache` suffix.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11217
Byte images used `ibuf->float_colorspace` as source colorspace.
This was oversight - `ibuf->rect_colorspace` should be used as source
colorspace.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11223
In e1f3996d74, logic for changing metastrip start and end frame based
on contained strips was removed. This was done intentionally and
incorrect functionality wasn't noticed as drawing code reflected
seemingly correct state.
Original code was mostly correct, because meta strip doesn't store its
internal start and end points. This code was restored with minor
modifications so function `SEQ_time_update_sequence()` is fully self
contained as it is used not only by transform operator.
In addition, drawing glitches that happen when meta content is outside
of meta boundaries were fixed. These glitches were not caused by
e1f3996d74.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11215
Not allowing external direct access to the vector of splines in the
curve will help for things like reallocating custom data when a spline
is added or removed.
* Set colors for the new texture and material sockets
* Material uses the same color used for shading icons
* Texture uses a plum color desaturated enough to not be confused with Vector's violet
* Image socket adjusted to be closer to Texture sockets but darker
* Integer socket toned down in saturation to not stand out so much
(and be closer to float sockets which are gray)
Making this change now during bcon1 to gather feedback from the community,
and because Geometry Nodes needs to use the new texture/material sockets.
This commit exposes the first spline control point attributes. The
implementation incorporates the attributes into the virtual array
system, providing efficient methods to flatten the data into a
contiguous array and to apply changes from a flattened array. This
is only part of the eventual goal, which includes changes to run
attribute nodes separately for each spline to completely avoid copying.
So far `tilt` and `radius`, the two generic attributes common to
all spline types, are implemented. The more complex `position`
attribute is also added. It requires some special handling for Bezier
splines, where the control point handles need to be moved along with
the control points. To make that work I also added automatic handle
recalculation to the Bezier spline.
Differential Revision: https://developer.blender.org/D11187
This was caused by the drivers not optimizing the shader enough to remove
the samplers and data used by closure eval. Removing the lighting loops
from the depth shader fixes the perf regression.
With Constrain to Image Bounds selected, UVs will be constrained to the
correct/closest UDIM if the image is tiled.
UVs will be constrained to the 0-1 UV space if the image is not tiled.
This will override the present behavior of always constraining selected
UVs to the 0-1 UV space (UDIM 1001).
Reviewed By: campbellbarton
Ref D11202
The sockets are not exposed in any nodes yet.
They work similar to the Object/Collection sockets, which also
just reference a data block.
This is part of D11222.
When activated in modal, `translate`, `resize`, `rotate`, `shear` and
`edge_rotate_normal` use a different orientation than the set in scene.
This orientation needed to match since some of these modes can be switched
during operation.
The default orientation for these modes was `V3D_ORIENT_VIEW`.
And this changed when finishing the `translate` and `resize` to
`V3D_ORIENT_GLOBAL`.
But this could cause inconsistencies when inputting values from the
keyboard.
The solution now is to change the orientation when you change the mode.
---
Note: Although the user can expect the value entered to reflect the
orientation set in the scene, it would require a lot of changes and would
not be really useful.
Extracts `nlasnapshot_blend_get_inverted_upper_snapshot()` from
`BKE_animsys_nla_remap_keyframe_values()`
This introduces a new struct member:
`NlaEvalChannelSnapshot->remap_domain` and marks which values of
`blended_snapshot` are processed for remapping/used-for-inverting.
Effectively, it marks which values have successfully been remapped and
can be further used for remapping.
`nlasnapshot_blend_get_inverted_upper_snapshot()`:
output snapshot `r_upper_snapshot` has each channel's `remap_domain`
written to which effectively marks the successfully remapped values.
The only reason a value is not in the remap domain is if inversion
failed or it wasn't marked to be remapped.
`..get_inverted_upper_snapshot()` has a variant `nlasnapshot_blend()`
from {D10220}, but this patch doesn't depend on it at all. A third
variant will later be added `..get_inverted_lower_snapshot()`.
Altogether, these three functions allow solving for any of
(lower_snapshot, upper_snapshot, blended_snapshot) given the other two.
The function `..get_inverted_lower_snapshot()` will also similarly
process the remap domain of the blended and lower snapshot.
added assertions within `nlasnapshot_blend()` and
`..get_inverted_upper_snapshot()` to future proof branches dealing with
blendmode and mixmodes. (suggested by sybren)
No user functional changes
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D10222
This turns links red if no implicit conversion can be made between the
from socket and the to socket. For geometry nodes this happens with
object, geometry, collection, and string sockets that are connected to
a different type. The change is simply implementing a callback that is
already implemented for other node tree types.
Differential Revision: https://developer.blender.org/D11229
