* Chains of selected strips are now converted to meta-strips before transforms begin, and converted back afterwards. This simplifies the transform code needed in later stages...
* Transform-flushing code for Meta-Strips should now work. There seems to be a little bit of numeric inaccuracy problems somewhere, as two strips which met at the same frame can get separated when scaling.
* Meta-strips now draw with proper text identification
* Snapping strips now properly clears meta-strips if a moved strip needs to be moved into a new track to be accomodated.
* Fixed a filter used by a selection-operator.
While trying to fix the mapping conversions for repeat, I came across some limitations with the current (soon to be previous) mapping methods.
Now the mapping conversions should work nicely for all places that use them.
* Based on what happens during simulation the cache is marked (also in cache panel, this could possibly be extended to 3d view as well) as:
- exact (not marked)
- outdated (simulation is not done completely with current settings)
- non-exact (frames were skipped during simulation)
* The parameter "cache step" effects the number of frames between saved cache frames.
- This can save a lot of memory (or disk space) if absolutely frame accurate simulation is not required.
- Speeds up the "quick caching" very much.
- Frames between cached frames are interpolated from the cached frames.
- Current default value of 10 frames works nicely with up/down-arrows (skip 10 frames forwards/backwards on timeline), but can be changed if wanted.
* The caching can work in normal or "quick" mode:
[Normal cache]
- Basic: Calculate what even happens (settings change, big frame steps etc.) and cache results, if possible try to use "cache step" when saving cache frames.
- Becomes non-exact: After larger than 1 frame steps.
- Becomes outdated: After any change effecting the simulation other than frame steps.
- Pros/cons: Freedom of doing anything and playing with particles, but exact results have to calculated from the beginning.
[Quick cache]
- Basic: Calculate simulation up to current frame automatically on changes with cache step sized jumps in simulation. With multiple "quick cached" simulations the smallest cache step is used.
- Becomes non-exact: Always from frame 1 (unless cache step = 1).
- Becomes outdated: Never.
- Pros/cons: Not very accurate, but super fast!
- Todo: Transform of any animated (non-autokeyed) object is locked! Probably needs some tinkering with anim sys overrides.
* The simulation can be run forwards or backwards even if it's cache is outdated or non-exact, the following rules apply in these situations:
- step forwards (to unknown) -> simulate from last exact frame, store result
- step backwards (to known) -> result is interpolated from existing frames, store result, clear cache forwards if current frame is after last exact frame
* "Calculate to current frame" runs the simulation from start to current frame with a frame steps of 1.
- Baking does the same, but runs the simulation all the way to the end of simulation.
- Rendering does this automatically if the simulation is outdated of non-exact, so all rendered simulations will always be updated and exact.
* Every cache panel also holds buttons to "Bake all dynamics", "Free all dynamics" and "Update all dynamics to current frame".
* Cloth simulation supports the new cache too.
The snapping code was incorrectly assuming that td->extra was always AnimData, but for NLA this is incorrect as it is used for special data used for checking back.
In TweakMode, the keyframes of the Active Action are now shown (and can be edited) in NLA-mapped time, with appropriate corrections applied when editing. This works in the DopeSheet and Graph Editors :)
To do this, got rid of the old wrappers/API-methods, replacing them with new-style ones. A few methods previously (in this branch) used only for evaluation are now used for this purpose too. As the same code is used for editing + evaluation, this should now be much better to work with.
I've only done a few brief tests now, but I think I might've muddled the invert-flags on one or two cases which I'll need to check out tomorrow. So, beware that there may be some weird and critical bugs for the next few days here...
Also, added proper license headers to new NLA files.
TODO:
- testing + bugfixing due to this commit
- show range of keyframes in NLA Editor active-action line
* Menu and header more complete now.
* Clean up Game Properties panel and moved View Properties panel
to python.
* Fix some drawing issues when combining tiles, repeat and aspect,
some also from 2.4x, these options didn't work together 100%.
* Moved proportional edit, snap, autokey mode, and a few others
from Scene to ToolSettings.
* RNA wrapped properties in ToolSettings for the UV editor:
proportional edit, snap settings, selection modes.
* 2 new enums event_value_items and event_type_items in RNA_enum_types.h
* WM_key_event_string now uses an RNA enum lookup rather then its own switch statement.
* moved wmEvent from WM_types.h into DNA_windowmanager_types.h
* added RNA_enum_identifier and RNA_enum_name to get strings from an enum value.
* Particles support larger than 1 frame changes, bigger frame changes can result in inaccurate results, but it's super fast and you get a nice feeling of how the particles behave!
* "Cache to current frame" button calculates the exact result of particles at current frame.
* Current state of cache can be protected by making it a bake.
* Cache is now in memory by default, disk cache is an option.
* Only "viewport %" number of particles are calculated and cached in viewport, baking and rendering calculate all particles.
* Info on cached frames and memory usage given in ui.
* Support for exact "autocaching" of changes and large frame changes(disabled for now until exact place in event system is decided)
* "Continue physics" is probably deprecated after this and should be removed once sb & cloth use the new cache code.
Todo:
* Make softbody & cloth use the new cache things.
Other changes:
* Some cleanup of particle buttons.
* Added icon to property and enum property items. The latter is
responsible for the large number of files changed.
* For RNA functions, added PROP_RNAPTR flag to ask for a PointerRNA
as argument instead of a C pointer, instead of doing it implicitly
with the AnyType type.
* Material: properly wrap diffuse/specular param variables, and
rename some things for consistency.
* MaterialTextureSlot: added "enabled" property (ma->septex).
* Image: make animated property editable.
* Image Editor: make some things editable, notifiers, respect state.
* Context: fix issue with screen not being set as ID.
This commit restores transform support for NLA. Grab, scale, 'extend', and tweak (i.e. grab by just click+dragging) are implemented.
Notes:
- As soon as one end of a strip touches another adjacent strip (within the same track), that end stops moving. This has been done to avoid the situation where overlapping strips within the same track (which is not allowed) might be caused by transforms.
- Made some changes to the RNA setters for the strip extents so that the validation above could take place (and other necessary changes on a per-strip basis could also occur).
TODO's ?
- Strips cannot be transferred from track to track using transforms. I've yet to decide whether this needs to be done, or whether a separate operator will suffice.
- What happens to the range of Actions used when the strips change sizes unexpectedly (i.e. the no-overlap condition above)? Currently range stays the same, but this doesn't always seem desirable?
* Buttons are now created first, and after that the layout is computed.
This means the layout engine now works at button level, and makes it
easier to write templates. Otherwise you had to store all info and
create the buttons later.
* Added interface_templates.c as a separate file to put templates in.
These can contain regular buttons, and can be put in a Free layout,
which means you can specify manual coordinates, but still get nested
correct inside other layouts.
* API was changed to allow better nesting. Previously items were added
in the last added layout specifier, i.e. one level up in the layout
hierarchy. This doesn't work well in always, so now when creating things
like rows or columns it always returns a layout which you have to add
the items in. All py scripts were updated to follow this.
* Computing the layout now goes in two passes, first estimating the
required width/height of all nested layouts, and then in the second
pass using the results of that to decide on the actual locations.
* Enum and array buttons now follow the direction of the layout, i.e.
they are vertical or horizontal depending if they are in a column or row.
* Color properties now get a color picker, and only get the additional
RGB sliders with Expand=True.
* File/directory string properties now get a button next to them for
opening the file browse, though this is not implemented yet.
* Layout items can now be aligned, set align=True when creating a column,
row, etc.
* Buttons now get a minimum width of one icon (avoids squashing icon
buttons).
* Moved some more space variables into Style.
1) Remove WITH_FREETYPE2 from code, so now blender always need freetype2
2) Remove the old bmfont
3) Remove ftfont and bFTGL library
4) Implement a new BLF_draw_default function for place that still need/use
the old BMF api.
I try to update both, scons and cmake, but I only can test with make, so
hope all work fine.
MSVC is broken, but I don't have Windows, things to search and fix are
any reference to WITH_FREETYPE2, FTGL and BMFONT (take in care that
blenkernel also have a BKE_bmfont.h, this don't have anything to do with bmfont).
Always have to link/include the freetype2 library
Remove any reference to libbmfont
Remove any reference to libftfont
Remove any reference to libbftgl (or libbFTGL)
* Headers and menus can now be created in python.
* Replaced the uiMenuItem functions to create menus with equivalent
uiItem functions using a layout, removing duplicated code.
* More uiItem functions are now exposed to python.
* The text editor header, panels and one of its menus are now created
in space_text.py.
* Buttons window data context icon new changes depending on active
object.
Issues
* Icons are not wrapped yet, hardcoded ints at the moment.
* The ID browse template is unfinished.
- Fun for testers: Added "Redo Operator" Panel in view3d 'nkey' region.
It's going to be part of tools UI I know, but this will give good
tests of what goes on with operators. I had to add small fixes in
Transform for it already. :)
One important issue to note is that it lists every operator, also from
non-3D-window ops. Needs checked or classified somehow.
- Fix: removed bad 2.4x hack from how pulldown menus were defined. Made
widget code cleaner, and will show menus like SHIFT+A correct now.
* Cleaned up Keyframing API to get eliminate some of the problems faced during the original implementation of PoseLib, thus reducing code redundancy.
* Added new Animato evaluation functions specifically for use by PoseLib.
* Replaced parts of PoseLib code which relied on old animation system to the equivalent code for Animato. Notice the much cleaner + saner + compact code!
Next step is to operatorfy the PoseLib tools (while maintaining possibility for an API to some things) :)
More cleanup!
- removed old UI font completely, including from uiBeginBlock
- emboss hints for uiBlock only have three types now;
Regular, Pulldown, or "Nothing" (only icon/text)
- removed old font path from Userdef
- removed all old button theme hinting
- removed old "auto block" to merge buttons in groups
(was only in use for radiosity buttons)
And went over all warnings. One hooray for make giving clean output :)
Well, we need uniform definitions for warnings, so people at least fix
them... here's the real bad bugs I found:
- in mesh code, a call to editmesh mixed *em and *me
- in armature, ED_util.h was not included, so no warnings for wrong call
to ED_undo_push()
- The extern Py api .h was not included in the bpy_interface.c, showing
a several calls using different args.
Further just added the missing includes, and removed unused vars.
since the loop that works around t->data being freed can sometimes shuffle strips that are not being transformed (eg, when extending or with locked strips)
* text header needs a static char* so text is not rendered as gibberish. (until labels own their own strings)
* epy_doc_gen.py - write out a graphviz representation of the data api.
* Screen level regions created for menus are now a separate
CTX_wm_menu in the context, so they don't interfere with
existing regions.
* Fix context in popup menus to always come from the area
and region the popup was opened from.
* Removed some unused context stuff: tasks and reports.
The places that were using context reports were using it
wrong anyway.
* Fix F6 closing immediately after editing a button, by
making uiBlockSetFlag not clear existing flags anymore.
* Don't use ":" in boolean X/Y/Z buttons.
* Made it based on string lookups rather than fixed enum, to make
it extensible by python scripts.
* Context callbacks now also have to specify RNA type when returning
pointers or collections. For non-RNA wrapped data, UnknownType can
be used.
* RNA wrapped context. The WM entries are fixed, for data context
only main and scene are defined properties. Other data entries have
to be dynamically looked up.
* I've added some special code in python for the dynamic context
lookups. Tried to hide it behind RNA but didn't find a clean way to
do it yet. Still unused/untested.
* Also minor fix for warning about propertional edit property in
transform code, and fix for usage of operator poll with checking if
it was NULL.
Notes:
* Sequence transform strip uses G.scene global, this is commented
out now, should be fixed.
* Etch-a-ton code was most difficult to merge. The files already in
2.5 got merged, but no new files were added. Calls to these files
are commented out with "XXX etch-a-ton". editarmature.c and
transform_snap.c were complex to merge. Martin, please check?
* Game engine compiles and links again here for scons/make/cmake
(player still fails to link).
