This commit changes the tool tip for the "Copy To Selected Button" operator.
The exiting tool tip for this operator suggests that it will "copy property to selected objects or bones".
However, it will only copies the property value to the selected objects or bones if the property already exists on the selected items.
It does not copy the property.
Differential Revision: https://developer.blender.org/D14528
Removal of BLT_lang_is_ime_supported which is always returns true and
is no longer needed.
See D11800 for more details.
Differential Revision: https://developer.blender.org/D11800
Reviewed by Campbell Barton
NOTE: this patch originated in T98015 which was split into multiple
reports. While it could be split into multiple patches these are very
much related so keeping as one for now
This patch fixes the following issues:
[1] autokeying transforms in preview only creates keyframes if there is
an FCurve already
[2] autokeying transforms in preview only creates keyframes for
rotation/scale if rotating/scaling around cursor (should keyframe
position as well)
[3] autokeying transforms in preview does not work during animation
playback
For [1], a param was added to `ED_autokeyframe_property` which can tweak
its default behavior of only creating keyframes on already keyed
properties (which was fine because this is mostly called from buttons
where this behavior is desired). Callers such as gizmos (or the VSE in
our case) can use this additional param so that keyframes are also
created on "not-yet-keyframed" properties.
For [2], the pivot is checked and position properties also keyed if
necessary (which is also consistent with the way objects are keyed in
the 3DView)
For [3], `animrecord_check_state` was changed to be able to work on
scenes as well and the transform system in the VSE preview was made
aware of the screen's `animtimer`.
NOTE: there are still things to be improved for keyframing in the VSE,
the most obvious is probably a `keyframe_insert` operator (with
keyingsets)
Fixes T98429, T98430, T98431
Maniphest Tasks: T98015, T98431, T98430, T98429
Differential Revision: https://developer.blender.org/D15047
This commit hides "UI attributes" described in T97452 from the UI lists
in mesh, curve, and point cloud properties, and disallow accessing them
in geometry nodes.
Internal UI attributes like selection and hiding values should use the
attribute system for simplicity and performance, but we don't want to
expose those attributes in the attribute panel, which is meant for
regular user interaction. Procedural access may be misleading or cause
problems, as described in the design task above.
These attributes are added by two upcoming patches: D14934, D14685
Differential Revision: https://developer.blender.org/D15069
See previous commit for an explanation of what went wrong. Similar to
the fix there, we also have to update the dragged data (e.g. the
data-block) referenced by the button.
Committing separately since this could cause further issues.
In Blender buttons are recreated over redraws, except of the active
button which is kept alive, and replaces the new version of itself in
the new redraw. In order to do that, the button needs to be recognized.
This process of recognizing and matching buttons from different redraws
isn't always bullet-proof. That's okay-ish, but we have to make sure
that the relevant data of the old active button is updated with the
newest data.
Here the matching would go wrong, and the new active button was
recognized as the old active button, which was in fact removed when the
asset was cleared. This patch makes sure the image buffer attached to
the buttons is updated when buttons were recognized as matching.
Note that the dragging will still use the wrong data-block, this will be
fixed in the following commit.
Fix T97500 by removing the logic that for some unknown reason draws the
entire string if the min/max were swapped.
This function is only called in two places, once here in the NLA, and
the VSE. The bug only materializes in the NLA though.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14742
Currently strings are used for cases where a list of identifiers would
be useful to show.
Add support for string properties to reference a callback to populate
candidates to show when editing a string. The user isn't prevented from
typing in text not found in this list, it's just useful as a reference.
Support for expanding the following strings has been added:
- Operator, menu & panel identifiers in the keymap editor.
- WM operators that reference data-paths expand using the
Python-consoles auto-complete functionality.
- Names of keying sets for insert/delete keyframe operators.
Details:
- `bpy.props.StringProperty` takes an option `search` callback.
- A new string callback has been added, set via
`RNA_def_property_string_search_func` or
`RNA_def_property_string_search_func_runtime`.
- Addresses usability issue highlighted by T89560,
where setting keying set identifiers as strings isn't practical.
- Showing additional right-aligned text in the search results is
supported but disabled by default as the text is too cramped in most
string search popups where the feature would make sense. It could be
enabled as part of other layout tweaks.
Reviewed By: brecht
Ref D14986
There are now some generalized helpers for passing IDs from drag & drop
to operators via operator properties, mostly introduced in 917c096be6
and 8f79fa9c67. These can be used in a bunch of places to reduce
duplicated code and explicitly share a common solution.
Side-effect: The "Name" property won't show up in the Adjust Last
Operation anymore, and its value won't be remembered over multiple
executions of the operator. Both were not at all useful from what I can
tell, and I doubt this was done intentionally.
This should decrease cognitive load because:
- Intention is more explicit
- Shorter visual scope of branches (no need to search for matching
closing brackets and `else` blocks)
- Visually less busy code because condition-checks and code that
"actually does things" are separated, with less indentation
- Avoids chaining together a bunch of conditions to a single `if`
Also: Use `const`, correct comment placement, whitespace improvements.
* Rename ambiguous rgb to scene_linear in some places
* Precompute matrices to directly go to scene instead of through XYZ
* Make function signatures more consistent
Previously we would pass button state and draw information to widget
draw callbacks in a rather hacky way. Some specific flags from
`uiBut.flag` were masked out, so their bits could be reused for also
passing `uiBut.drawflag` in the same int. Instead this commit introduces
a state-info struct that can properly hold all the relevant data.
This has the advantage that it's now easier to introduce new state data
that needs to be accessible in the widget callbacks. Since we are
running out of button flags, we plan to reorganize button flags, and
split them up into multiple bitfields. In the widget drawing code, this
would have been a hassle earlier.
Also had to add a new widget callback to draw blocks as widgets (popup
backgrounds), since that would pass block flags where we would usually
pass button flags. This wasn't nice, now it's separated more clearly.
This flag was used to activate the hotkey input buttons (e.g. for
"Assign Shortcut") when opened in a popup. Since this was added, other
more generalized ways of getting this same behavior were implemented.
Had to tweak the hotkey button event handling a bit, but it seems to
behave exactly as before now.
Avoids having to manually enable data-blocks for user-edition when you
do not care about what should be edited by whom. Similar to default
behavior before introduction of system overrides (aka non-user-editable
overrides).
When labels in popups (typically headings) matched the name of a button,
the label would be activated instead of the button.
This caused the unwrap menu in the UV editor not to re-select "Unwrap"
when opening a second time.
Steps to reproduce were:
- Factory startup
- Right-click in 3D View
- Move the mouse over "Shade Flat", wait for the tooltip
The changed logic in 4680331749 to lookup an active button was
incorrect. It didn't respect the priority of active button candidates.
Issue is that the operator acts on the active button, and also uses that in the
poll. So the actually active button would affect the poll of a different
button. For the superimposed icons we need to be able to execute these polls
properly for non-active buttons.
This enables temporarily overriding the active button for lookups via context.
While a bit of a hack it makes sense conceptually.
Reviewed By: Campbell Barton
Maniphest Tasks: T97518
Differential Revision: https://developer.blender.org/D14880
Steps to reproduce were:
- Factory startup
- Right-click in 3D View
- Move the mouse over "Shade Flat", wait for the tooltip
The changed logic in 4680331749 to lookup an active button was
incorrect. It didn't respect the priority of active button candidates.
Issue is that the operator acts on the active button, and also uses that in the
poll. So the actually active button would affect the poll of a different
button. For the superimposed icons we need to be able to execute these polls
properly for non-active buttons.
This enables temporarily overriding the active button for lookups via context.
While a bit of a hack it makes sense conceptually.
Reviewed By: Campbell Barton
Maniphest Tasks: T97518
Differential Revision: https://developer.blender.org/D14880
Regression caused by [0] which made `ui_but_is_interactive` consider
label buttons with tool-tips to be interactive. This prevented
the clicks to pass through to the nodes for selecting/dragging.
Resolve this by allowing buttons to be activated for the purpose
of showing tool-tips but otherwise considering them disabled
(as if the UI_BUT_DISABLED is set when handling events).
[0]: 484a914647
Reviewed By: Severin
Ref D14932
`uiBut` contained a variable that was only used for these hot-key
buttons. This may also help getting rid of the `UI_BUT_IMMEDIATE` flag,
which is also only used for this button type. We are running out of
available bits for flags, so this would be useful.
Continuing the work from 49f088e2d0. Part of T74432.
This reverts the commits 8d9d5da137,
59cd616534 and
98a04ed452.
The commits are causing issues with MSVC, see D14926. I'm working on a
different solution, but that will need some work.
Having to manually increase all other flag values to be able to add a
new internal flag is quite annoying. Just make space for a few more
once.
Generally I'd say internal flags are preferable, since it increases
encapsulation. So good to avoid making this a hassle.
This patch adds the show_gizmo and show_gizmo_navigate properties to the Image and UV editors.
Image Editor:
{F13026317}
UV Editor:
{F13026319}
VIDEO:
{F13026324}
Reviewed By: #user_interface, campbellbarton
Differential Revision: https://developer.blender.org/D14755
This should have no functional changes.
This reduce the complexity of the shader by only supporting 2 colors.
We never use more than 2 color in practice and this makes usage not require
a UBO.
This patch adds the drag and drop strip previews in the VSE.
It also adds two new functions to the drag and drop API.
1. "draw_in_view" for callbacks that wants to draw elements in local viewport coordinates
2. "on_drag_start" that can be used for prefetching data only once at the start of the drag.
Reviewed By: Julian, Campbell
Differential Revision: http://developer.blender.org/D14560
