This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
The winding order of the faces changes when flipping the faces.
This lead to the loop indices changing as well.
Now we take this into account when restoring and flipping the custom
normals. Before the normals would be swapped.
Build a temp matarray storing materials from obdata and source object
(depending on slots 'allocation' of source object), and assign those to
targets.
Also remove limitation of 'using same obdata is forbidden', just never
edit obdata materials in that case...
Certainly not perfect, but already much better than existing code.
This matches the change that was done to the bevel modifier so that the
interface for the modifier, the active tool, and the operator are consistent.
This commit extends the refactor to the bmesh implementation too, so
that the parameters in the implementation don't stray too far from what
is exposed.
Tests are adjusted and still pass.
Operators are one of the last places in Blender to use older UI designs
that don't fit in with recent style conventions. This commit updates
these custom operator UI callbacks for consistency and clarity.
Some of the code is also simplified a lot. Some of the older operator layouts
were much more complex (in terms of code) than they needed to be.
See the differential revision for a before and after screenshot
of each operator.
Differential Revision: https://developer.blender.org/D8326
Internally UV selection considered close UV's to be connected.
While this could be convenient in some cases,
it complicates logic for more advanced selection operations that
need to check when UV's should be considered part of the same vertex
since simple threshold checks would give different results depending
on the order of UV's tested.
Users must now run "Merge by Distance" instead of relying
on this selection threshold.
Analyzing the cuts, the points shown in the viewport (indicating the
previous and current cuts) do not correspond to the final cuts.
Sometimes a point, even snapped to a vert, is a point that cuts an edge and
sometimes a point, even snapped to an edge, is a point that cuts only the face.
This is because the detection of snapping vertices from mouse is different
from the "snap" that detects vertices that are cut.
So small projection inaccuracies can result in detection failures.
The solution for this is simply to confirm the cuts whose vertices
indicate the `prev` ou and `cur` point.
The tolerance distance does not need to be calculated in these cases.
This fixes the double prop edit checkbox in the redo menu.
This also makes it so that proportional edit in connected mode now
matches how it behaves in mesh edit mode.
Without this change, ripping in UV edit mode with proportional edit on
would be useless as the UV verts you ripped will still be stuck together
even if they were not connected anymore.
Reviewed By: Campbell
Differential Revision: http://developer.blender.org/D8289
As Face Sets IDs start from 0 and increase by 1 each time a new face set
is created in a mesh, when joining multiple meshes it could happen that
the same ID is used by several unrelated areas in multiple objects. This
checks the Face Sets IDs when joining meshes and ensures that they are
not repeated between different objects when joining them, so in the
resulting mesh all previous face sets will have different IDs.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8224
This adds support for path selection for vertex edge & face selection
modes, matching mesh editing behavior, useful with the UV rip tool.
Region select & edge tagging are currently not supported,
although they could be added eventually.
The knife code currently calls the `BLI_bvhtree_overlap` function that
tests the overlap between the mesh tree and an AABB that encompasses the
points projected in the clip_start, clip_end and or clip_planes of the
view.
This resulted in many false positives since the AABB is very large.
Often all the triangles "overlapped".
The solution was to create a new function that actually tests the
intersection of AABB with a plane.
Even not considering the clip_planes of the view, this solution is more
appropriate than using overlap.
Differential Revision: https://developer.blender.org/D8229
Both `knife_find_closest_vert` and `knife_find_closest_edge` call
`knife_find_closest_face`. Thus, running the raycast twice and setting
values like `kcd->curr.bmface` and `kcd->curr.is_space` repeatedly.
So:
- separate `knife_find_closest_face` from `knife_find_closest_vert` and `knife_find_closest_edge`.
- rename `knife_find_closest_vert` to `knife_find_closest_vert_of_face`
- rename `knife_find_closest_edge `to `knife_find_closest_edge_of_face`.
- do not set parameters previously set.
Differential Revision: https://developer.blender.org/D8198
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
This will allow the easier addition of a constant radius mode in the
future and some changes in the UI to mirror the recent similar change
from "Only Vertices" to the "Affect" enum.
This mode is like Percent, but measures absolute distance along
adjacent edges instead of a percentage.
So, for example, if you use this mode with 2 segments and profile=1,
you will see the length that the bevel moves along unbeveled edges
between beveled ones will match the value specified.
Many users seem to expect this behavior, even though it means the
bevel width is uneven, so this option is for them.
Using enum type itself in implementations, and uint in headers (as using
enums types in headers is a pain when enum are not defined and used in a
single same header file...).
Custom Loop Normals are normally encoded relative to the default
normals, similar to normal maps, allowing them to naturally follow
mesh deformations. Changes to mesh topology however often result
in nonsensical effects that are not desired.
The Remove Doubles operation especially (now known as Merge By
Distance) is intended as a purely topological operation, and
definitely should not change the vector of the custom normals.
This patch implements that behavior by converting the relative
encoding into an absolute vector layer for the duration of the
operation. It also modifies other Merge types in this way for
consistency, the Rip operator as their inverse counterpart;
and also Delete, Dissolve, Connect Path and Knife operators
as other examples more related to topology than shape.
On the technical side, this ports mesh_normals_loop_custom_set
to BMesh, and then uses a temporary Custom Data layer to store
the normals as vectors for the duration of the above mentioned
operations. When the normals are converted back to custom data,
the caller can choose whether to mark edges as sharp to preserve
distinct normals, or just average them instead. All but Remove
Doubles choose to average for now.
Differential Revision: https://developer.blender.org/D4994
This is related to T76659.
This just renames data type names to `CD_PROP_STRING`, `CD_PROP_FLOAT`
and `CD_PROP_INT32`. It makes them a bit more specific and removes
unnecessary abbreviations.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7980
In this case the draw engine isn't responsible for the selection, but
the editor is.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7955
Because this controls how the amount is used in should be set first and
is more important therefor place it at the top.
This is also consistent with other areas in Blender
The issue was the custom loop normal data would be mangled when we
reversed the face loops.
The flip face code will now correctly flip the custom face normals so
they are not left in an undefined state.
Reviewed By: Bastien
Differential Revision: http://developer.blender.org/D7528
The current behavior isn't necessarily "incorrect," but it's unintuitive
and confusing. A simple fix is to apply parentinv before finishing the
operator.
However, there may still be issues when the object's parent has a parent.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7723
Fairly critical code mistake actually, since it uses malloca,
BLI_smallstack should *never* be declared inside a loop...
Also optimized handling of the `loop_weight` heapsimple, we can also
only create and use a single one for all edited objects...
Found two other operators potentially affected by same issue (split
normals, and weld edges into faces).
This was returning true in edit mode, causing the crash
Reviewed By: jbakker
Maniphest Tasks: T76488
Differential Revision: https://developer.blender.org/D7645
