This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/space_node` module.
No functional changes.
Use the automatic property split layout (hence, change to the new 40/60% split
ratio) and add decorator buttons for animatable properties.
This actually applies to all node input buttons in the properties, e.g. world shading,
light shading, texture nodes.
Doing this makes the layout more consistent with other layouts in the
properties. But the decorators are also a useful hint for users that these
options can be animated. Previously using decorators and the automatic split
layout wasn't possible, I've done a number of changes now to have it supported.
Before I moved the socket icons to the left side, the decorators also looked
weird (two circle icons next to each other).
{F8497704} With nested items: {F8497708}
Reviewed By: William Reynish, Pablo Vazquez
Differential Revision: https://developer.blender.org/D7544
Node input buttons (e.g. in the material properties) used to draw their
icons on the right of the buttons. However since they represent inputs,
it makes more sense conceptually to have them on the left.
Further, we might want to add the usual decorator buttons (to control
keyframes or display other states) to the material properties as well.
Having two circle icons next to each other would be confusing.
Differential Revision: https://developer.blender.org/D7409
Reviewed by: Brecht Van Lommel, William Reynish
For buttons representing node inputs (e.g. in the material properties)
rather than drawing some generic socket icon, the actual sockets are
drawn now. That includes color, shape and the selection outline.
This should make it easier to understand what these buttons relate to.
Screenshots: {F8469252}, {F8469248} (The left alignment will be done in
a follow-up commit.)
Differential Revision: https://developer.blender.org/D7409
Reviewed by: Brecht Van Lommel, Clément Foucault, William Reynish
Currently the link limit of sockets is stored in bNodeSocket->limit.
This allows for a lot of flexibility, but is also very redundant.
In every case I've had to deal with so far, it would have "more correct"
to set the link limit per socket type and not per socket. I did not enforce
this constraint yet, because the link limit is exposed in the Python API,
which I did not want to break here.
In the future it might even make sense to only support only three kinds of link limits:
a) no links, b) at most one link, c) an arbitrary number links links. The other link
limits usually don't work well with tools (e.g. which link should be removed when a new
one is connected?) and is not used in practice. However, that is for another day.
Eventually, I would like to get rid of bNodeSocket->limit completely and replace it
either with fixed link limits or a callback in bNodeSocketType.
This patch consists of three parts:
**1. Support defining link limit in socket type**
This introduces a new `nodeSocketLinkLimit` function that serves as an indirection to
hide where the link limit of a socket is defined.
**2. Define link limits for builtin sockets on socket type**
Data sockets: one input, many outputs
Virtual sockets: one input, one output
Undefined sockets: many inputs, many outputs (to avoid that links are removed when the type of the socket is not known)
**3. Remove `bNodeSocketTemplate->limit`**
This wasn't used anymore after the second commit. Removing it simplifies socket definitions
in hundreds of places and removes a lot of redundancy.
Differential Revision: https://developer.blender.org/D7038
Reviewers: brecht
This was already supported for Cycles shader nodes, but now also works for
Eevee and compositing nodes. Instead of a generic NodeCustomGroup, now
there is ShaderNodeCustomGroup and CompositorNodeCustomGroup that can be
subclassed and registered.
Differential Revision: https://developer.blender.org/D4370
User counting now happens before init() and after free() methods, so that
the ID users are in a valid state when Python might modify them. ID user
counting was moved into node.c and simplified.
Patch by Miguel with further refactoring by Brecht. Ref D4370.
Convention was not to but after discussion on 918941483f we agree its
best to change the convention.
Names now mostly follow RNA.
Some exceptions:
- Use 'nodetrees' instead of 'nodegroups'
since the struct is called NodeTree.
- Use 'gpencils' instead of 'grease_pencil'
since 'gpencil' is a common abbreviation in the C code.
Other exceptions:
- Leave 'wm' as it's a list of one.
- Leave 'ipo' as is for versioning.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
Terms get/set don't make much sense when casting values.
Name macros so the conversion is obvious,
use common prefix for easier completion.
- GET_INT_FROM_POINTER -> POINTER_AS_INT
- SET_INT_IN_POINTER -> POINTER_FROM_INT
- GET_UINT_FROM_POINTER -> POINTER_AS_UINT
- SET_UINT_IN_POINTER -> POINTER_FROM_UINT
Brecht authored this commit, but he gave me the honours to actually
do it. Here it goes; Blender Internal. Bye bye, you did great!
* Point density, voxel data, ocean, environment map textures were removed,
as these only worked within BI rendering. Note that the ocean modifier
and the Cycles point density shader node continue to work.
* Dynamic paint using material shading was removed, as this only worked
with BI. If we ever wanted to support this again probably it should go
through the baking API.
* GPU shader export through the Python API was removed. This only worked
for the old BI GLSL shaders, which no longer exists. Doing something
similar for Eevee would be significantly more complicated because it
uses a lot of multiplass rendering and logic outside the shader, it's
probably impractical.
* Collada material import / export code is mostly gone, as it only worked
for BI materials. We need to add Cycles / Eevee material support at some
point.
* The mesh noise operator was removed since it only worked with BI
material texture slots. A displacement modifier can be used instead.
* The delete texture paint slot operator was removed since it only worked
for BI material texture slots. Could be added back with node support.
* Not all legacy viewport features are supported in the new viewport, but
their code was removed. If we need to bring anything back we can look at
older git revisions.
* There is some legacy viewport code that I could not remove yet, and some
that I probably missed.
* Shader node execution code was left mostly intact, even though it is not
used anywhere now. We may eventually use this to replace the texture
nodes with Cycles / Eevee shader nodes.
* The Cycles Bake panel now includes settings for baking multires normal
and displacement maps. The underlying code needs to be merged properly,
and we plan to add back support for multires AO baking and add support
to Cycles baking for features like vertex color, displacement, and other
missing baking features.
* This commit removes DNA and the Python API for BI material, lamp, world
and scene settings. This breaks a lot of addons.
* There is more DNA that can be removed or renamed, where Cycles or Eevee
are reusing some old BI properties but the names are not really correct
anymore.
* Texture slots for materials, lamps and world were removed. They remain
for brushes, particles and freestyle linestyles.
* 'BLENDER_RENDER' remains in the COMPAT_ENGINES of UI panels. Cycles and
other renderers use this to find all panels to show, minus a few panels
that they have their own replacement for.
ViewRender was removed, which means we can't get the render engine for files
saved in 2.8. We assume that any files saved in 2.8 were intended to use Eevee
and set the engine to that.
A fix included with this is that .blend thumbails now draw with Clay mode,
and never Eevee or Cycles. These were drawn with solid mode in 2.7, and should
be very fast and not e.g. load heavy image textures.
Differential Revision: https://developer.blender.org/D3156
Engine is not stored in WorkSpaces. That defines the "context" engine, which
is used for the entire UI.
The engine used for the poll of nodes (add node menu, new nodes when "Use Nodes")
is obtained from context.
Introduce a ViewRender struct for viewport settings that are defined for
workspaces and scene. This struct will be populated with the hand-picked
settings that can be defined per workspace as per the 2.8 design.
* use_scene_settings
* properties editor: workshop + organize context path
Use Scene Settings
==================
For viewport drawing, Workspaces have an option to use the Scene render
settings (F12) instead of the viewport settings.
This way users can quickly preview the final render settings, engine and
View Layer. This will affect all the editors in that workspace, and it will be
clearly indicated in the top-bar.
Properties Editor: Add Workspace and organize context path
==========================================================
We now have the properties of:
Scene, Scene > Layer, Scene > World, Workspace
[Scene | Workspace] > Render Layer > Object
[Scene | Workspace] > Render Layer > Object > Data
(...)
Reviewers: Campbell Barton, Julian Eisel
Differential Revision: https://developer.blender.org/D2842
This was we don't have re-compo or viewport re-rendering happening when changing
nodes which are not connected to the output at all (for example when adding new
nodes or changing settings for unconnected nodes).
Only basic operations are covered for now. checks could be added to more tools
when needed.
Currently it's not fully optimal implementation, but seems to work fast enough.
Don't see reliable alternative to that -- keeping tag in the node wouldn't work
because of the node groups (which are probably already broken, but should be
easy to solve with current approach). So guess it's more matter of optimizing
path search from a node to output.
Before processing forward let's check whether it's indeed something we want
and whether the approach is indeed not fully bad.
Reviewers: campbellbarton, mont29
Subscribers: sebastian_k
Differential Revision: https://developer.blender.org/D1765
We have callbacks for that, they also do some checks and help ensure things are done
correctly. Only place where this is assumed not true is blenloader (since here we
may affect refcount of library IDs as well...).
