The mask is expected to be always be displayed smooth, and the
option mainly existed for some legacy drivers. IF smooth drawing
causes issues it should be fixed in the drawing code, not as an
option in the interface.
Differential Revision: https://developer.blender.org/D15266
Show a custom properties panel in the collections tab,
matching other data-blocks which already support this.
Reviewed by: HooglyBoogly, campbellbarton
Ref D12598
As described in T98943, this commit adds a node that can
evaluate a field on a separate domain in a larger field context.
This is potentially useful in many cases, to avoid relying on
a separate capture attribute node, which can make it easier
to build reusable fields that don't need geometry inputs.
Internally, the node just evaluates the input field in the larger
field context and then uses the generic domain interpolation,
so the code is simple. One future optimization might be using
the input selection to only evaluate part of the input field, but
then the selection has to be interpolated as well, and that might
not always be worth it.
Differential Revision: https://developer.blender.org/D15289
This node takes a point count,a vector field, and float field and creates
a pointcloud with n points at the positions indicated in the vector
field with the radii specified in the float field.The node is placed in
the "Point" menu.
Differential Revision: https://developer.blender.org/D13920
Maniphest Task: https://developer.blender.org/T93044
All of the operators in vertex paint mode didn't work properly with
the new color attribute system. They only worked on byte color type
attributes on the face corner domain.
Since there are four possible combinations of domains and types now,
it mostly ended up being simpler to convert the code to C++ and use
the geometry component API for retrieving attributes, interpolating
between domains, etc. The code changes ended up being fairly large,
but the result should be simpler now.
Differential Revision: https://developer.blender.org/D15261
Adds a custom property panel for the active `Action` to the Dopesheet
editor. There was previously no way to edit these properties outside of
the Python API.
This panel will show up when
`context.active_object.animation_data.action` is set.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14646
Adds an overlay option to show/hide the spline points & lines of masks in the Mask Editor.
It also moves the "smooth" option up (its position left of the selection dropdown was missleading).
{F11847272}
This emerged from a discussion in https://developer.blender.org/D12776
Differential Revision: https://developer.blender.org/D13314
This adds a new parameter to the "Combined" overlay mode of the mask editor.
The "blending factor" allows users to blend the mask exterior with the original
footage to visualise the content of the mask in a more intuitive way. The
"Alpha" overlay is unaffected by this change.
The existing "Combined" overlay is used like before (covering everything
outside the mask in black), but can be blended with the slider in the mask
overlay to look at the exterior.
This is part of an effort to make mask editing more intuitive & easy to use:
https://developer.blender.org/T93097
Differential Revision: https://developer.blender.org/D13284
This commit adds a Volume Cube primitive node. It outputs a volume that
contains a single "density" float grid. The density per voxel can be
controlled with a field that depends on the voxel position (using the
existing Position node). Other field inputs are not supported.
The density field is evaluated on every voxel.
Possible future improvements are listed in D15198.
Differential Revision: https://developer.blender.org/D15198
There is no need to have use/is in the final name. This is implicitly
represented by the checkbox already.
This does not change the Python API, only the names we show in the user
interface.
* Is Library Overridable -> Library Overridable
* Use Soft Limits -> Soft Limits
Differential Revision: https://developer.blender.org/D15217
Part of T98560.
See https://wiki.blender.org/wiki/Source/Interface/Views
Adds all the basic functionality needed for grid views. They display
items in a grid of rows and columns, typically with a preview image and
a label underneath. Think of the main region in the Asset Browser.
Current features:
- Active item
- Notifier listening (also added this to the tree view)
- Performance: Skip adding buttons that are not scrolled into view
(solves performance problems for big asset libraries, for example).
- Custom item size
- Preview items (items that draw a preview with a label underneath)
- Margins between items scale so the entire region width is filled with
column, rather than leaving a big empty block at the right if there's
not enough space for another column (like the File and current Asset
Browser does it).
- "Data-View Item" theme colors. Not shown in the UI yet.
No user visible changes expected since the grid views aren't used for
anything yet.
This was developed as part of a rewrite of the Asset Browser UI
(`asset-browser-grid-view` branch), see T95653. There's no reason to
keep this part in a branch, continuing development in master makes
things easier.
Grid and tree views have a lot of very similar code, so I'm planning to
unify them to a degree. I kept things separate for the start to first
find out how much and what exactly makes sense to override.
There were two problems here:
1) Console warnings due to brush was None.
2) It was impossible to recreate a brush.
This patch fixes both issues and it is now possible to recreate any brush.
Differential Revision: https://developer.blender.org/D15213
Reviewed by: @dflelinto
Fixes T97706
Adds operator to duplicate the active color attribute layer.
Adds `"Color Attribute Specials"` menu to color attribute ui to access the `"geometry.color_attribute_duplicate"` operator.
Internally adds a function that duplicates a referenced CustomDataLayer
- `BKE_id_attribute_duplicate` mostly copies the existing `BKE_id_attribute_new`
- but gets the type and domain from the referenced layer
- and copies the data from the old layer into the new layer
Reviewed By: Joseph Eagar & Hans Goudey & Julien Kaspar
Differential Revision: https://developer.blender.org/D14823
Ref D14823
The following CMake options have been added (enabled by default),
except for the lite build configuration.
- WITH_IO_STL
- WITH_IO_WAVEFRONT_OBJ
- WITH_IO_GPENCIL (for grease pencil SVG importing).
Note that it was already possible to disable grease pencil export
by disabling WITH_PUGIXML & WITH_HARU.
This is intended to keep the lite builds fast and small for building,
linking & execution.
Reviewed By: iyadahmed2001, aras_p, antoniov, mont29
Ref D15141
Though no nodes have descriptions currently, this patch makes it
possible to add descriptions that display in the add menu, for
custom node systems and existing builtin nodes.
Differential Revision: https://developer.blender.org/D14963
Add three operators to the Collections properties panel:
- `object.instance_offset_to_cursor`, which is already available from
the Object properties panel. The operator works on the active
collection, though, so it's weird to not have it in the Collections
panel.
- `object.instance_offset_from_object` is a new operator, which performs
the same operation as above, but then based on the active object's
evaluated world position.
- `object.instance_offset_to_cursor` is also new, and performs the
opposite of the first operator: it moves the 3D cursor to the
collection's instance offset.
The first two operators make it easier to set the instance offset. The
last operator makes it possible to actually see the offset in the 3D
viewport; drawing it using some overlay could also work, but that would
be more effort to get right, and then snapping the 3D cursor would still
be useful.
The operators are placed in a popup menu, as to not clutter the
interface too much with various buttons.
Reviewed By: dfelinto, eyecandy
Differential Revision: https://developer.blender.org/D14966
A new experimentatl STL importer, written in C++. Roughly 7-9x faster than the
Python based one.
Reviewed By: Aras Pranckevicius, Hans Goudey.
Differential Revision: https://developer.blender.org/D14941
A field input node for the scale of each top-level instance transform.
The scale can be set with the "Scale Instances" node, but previously
could not be retrieved.
Differential Revision: https://developer.blender.org/D15132
A field input node for the rotation of each top-level instance transform.
The rotation can be set with the "Rotate Instances" node, but previously
could not be retrieved.
Differential Revision: https://developer.blender.org/D15131
This implements transform modes for the transform tool and Elastic
Transform. This mode uses the Kelvinlets from elastic deform to apply
the transformation to the mesh, using the cursor radius to control the
elasticity falloff.
{F9269771}
In order for this to work, the transform tool uses incremental mode when
elastic transform is enabled. This allows to integrate the displacement of
the Kelvinet in multiple steps.
Review By: Sergey Sharbin & Daniel Bystedt & Julian Kaspar & Campbell
Barton
Differential Revision: https://developer.blender.org/D9653
Ref D15041
In the latest discussions about curves/hair mesh attachement
information (T95776), it was decided to use UV coordinates to
store where on the mesh each root is. For that, we have to specify
which of the UV map attributes to use for UV lookups.
This property isn't used yet, but it will be shortly when refactoring
the attachement information in the add brush and the to particle
system conversion.
Differential Revision: https://developer.blender.org/D15115
It can be assumed that all scripts comply with basic pep8 formatting
regarding white-space, indentation etc.
Also remove note in best practices page & update `tests/python/pep8.py`.
If we want to exclude some scripts from make format,
this can be done by adding them to `ignore_files` in:
source/tools/utils_maintenance/autopep8_format_paths.py
Or using `# nopep8` for to ignore for individual lines.
Ref T98554
To make it consistent with collections, now it's possible to name the new layer created using the `Move to Layer` option.
Differential Revision: https://developer.blender.org/D15092
This commit adds a float selection to curve control points or curves,
a sculpt tool to paint the selection, and uses the selection influence
in the existing sculpt brushes.
The selection is the inverse of the "mask" from mesh sculpt mode
currently. That change is described in more detail here: T97903
Since some sculpt tools are really "per curve" tools, they use the
average point selection of all of their points. The delete brush
considers a curve selected if any of its points have a non-zero
selection.
There is a new option to choose the selection domain, which affects how
painting the selection works. You can also turn the selection off by
clicking on the active domain.
Sculpt brushes can be faster when the selection is small, because
finding selected curves or points is generally faster than the
existing brush intersection and distance checks.
The main limitation currently is that we can't see the selection in the
viewport by default. For now, to see the selection one has to add a
simple material to the curves object as shown in the differential
revision. And one has to switch to Material Preview in the 3d view.
Differential Revision: https://developer.blender.org/D14934
This commit hides "UI attributes" described in T97452 from the UI lists
in mesh, curve, and point cloud properties, and disallow accessing them
in geometry nodes.
Internal UI attributes like selection and hiding values should use the
attribute system for simplicity and performance, but we don't want to
expose those attributes in the attribute panel, which is meant for
regular user interaction. Procedural access may be misleading or cause
problems, as described in the design task above.
These attributes are added by two upcoming patches: D14934, D14685
Differential Revision: https://developer.blender.org/D15069
When expanding the data path for the context, use Context.temp_override
to extract context members. Without this, only context-members available
in the preferences were used which misses members which are likely to
be useful.
Iterate over all windows, areas and regions showing unique member as
candidates. The search is limited to WINDOW/PREVIEW region types, the
preferences space type is also excluded. See the doc-string for
rna_path_prop_search_for_context for additional notes on this.
Currently strings are used for cases where a list of identifiers would
be useful to show.
Add support for string properties to reference a callback to populate
candidates to show when editing a string. The user isn't prevented from
typing in text not found in this list, it's just useful as a reference.
Support for expanding the following strings has been added:
- Operator, menu & panel identifiers in the keymap editor.
- WM operators that reference data-paths expand using the
Python-consoles auto-complete functionality.
- Names of keying sets for insert/delete keyframe operators.
Details:
- `bpy.props.StringProperty` takes an option `search` callback.
- A new string callback has been added, set via
`RNA_def_property_string_search_func` or
`RNA_def_property_string_search_func_runtime`.
- Addresses usability issue highlighted by T89560,
where setting keying set identifiers as strings isn't practical.
- Showing additional right-aligned text in the search results is
supported but disabled by default as the text is too cramped in most
string search popups where the feature would make sense. It could be
enabled as part of other layout tweaks.
Reviewed By: brecht
Ref D14986
If the asset is stored in the current file, display the corresponding
icon in the "Source" button in the sidebar. This is a nice indicator and
helps users learn what this icon represents (it's used in the main
region without text too).
This patch makes it possible to change the precision with which to
store volume data in the NanoVDB data structure (as float, half, or
using variable bit quantization) via the previously unused precision
field in the volume data block.
It makes it possible to further reduce memory usage during
rendering, at a slight cost to the visual detail of a volume.
Differential Revision: https://developer.blender.org/D10023
Avoids having to manually enable data-blocks for user-edition when you
do not care about what should be edited by whom. Similar to default
behavior before introduction of system overrides (aka non-user-editable
overrides).
