Now that we have a uniform consistent behavior in all our ID duplicate
funtions, we can easily factorize it greatly. Code gets cleaner,
smaller, and less error-prone.
Note that ultimately, this duplicate/deep copy behavior could be added
as a callback of IDTypeInfo.
We could also rethink the duplicate flags (some data, even some obdata,
like Lattice, are not coverred currently).
And so on. But at least code should now be much more easily maintainable
and extendable.
Previously, object (and sub-data) actions would be controlled by the
user preferences flag, collections actions would never be duplicted, and
scenes actions were always duplicated...
Now they all follow the user preferences settings.
Main change from user side, besides that all pointers should now be
properly remapped to new IDs, is that linked objects are no longer
preserved when doing a full copy of scenes.
Will open a task to check whether we actually still want that behavior
(and re-code it in a more correct way then).
This is the main part of work done here, it aims at uniformizing and
sanitizing that 'deep copy' process for supported IDs (currently scenes,
collections and objects).
Note that there will be more follow up commits after that one, but this
should be the most risky and changing one.
It makes no sense to deep-copy a collection and not also copy its
children collections... Parameter was not used anymore anyway.
So now this duplicate function will always at least deep-duplicate all
of its children collections, recursively.
Matches other similar cases for collection and object, and general
naming rule (copy is for generic ID copying, duplicate is for more
involved and poweful behaviors specific to an ID type).
This greatly simplifies and unifies logic.
Also addresses T77255: full scene copy will now use same preferences
parameters as object or collection duplicate to choose which data-blocks
to copy along.
Mix up with imapaint.paintcursor & imapaint.paint.paint_cursor
Remove imapaint.paintcursor since it wasn't used.
Also rename paint_cursor_start_explicit() to paint_cursor_start(),
removing the existing paint_cursor_start() since it took the paint
struct from the context, a value that's known by all callers.
Simple solution: remove the code which was causing bad threading
conflicts.
This code was a part of workaround for a specific state of linked
scene. It seems to be not needed anymore, since the pose is ensured
to be up to date by the following call stack:
- Dependency graph update,
- Copy-=on-write operation called on object.
- object_copy_data().
- BKE_pose_rebuild().
The workaround was a no-functional change for the dependency graph
anyway, because it was modifying original objects, not the ones
which are evaluated.
Since we re-use same addresses of IDs with newly read data, and never
remap old IDs to 'proper' 'old' ID pointers, it implies that old IDs
being deleted will have many ID pointers to new, valid data that we want
to keep.
In general anyway, code from IDTypeInfo (i.e. low-level ID management
code) should never do anything outside of its own ID scope, we cannot
guarantee that given ID is in fully valid state regarding its relations
to other data-blocks.
Scene audio volume changes require the scene to be tagged with
`ID_RECALC_AUDIO_VOLUME` (see `BKE_scene_update_sound()`). Tagging
happens in the RNA update function `rna_Scene_volume_update()`, but that
function is not called by the animation system. As a result, animated
volume changes are not sent to the audio system.
This commit adds a new depsgraph operation node that sets this tag when
necessary, so that the animated values are used in the rest of the
depsgraph evaluation.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7429
These changes only have an effect when the experimental Undo Speedup preference
is enabled.
* For DEG_id_tag_update, accumulate recalc flags immediately before the undo
push happens instead of afterwards. Otherwise the undo state does not
contain enough flags, and the current state may contain too many flags.
This also means we call DEG_id_tag_update after undo with the accumulated
flags to ensure they are flushed to other datablocks.
* For undo, accumulate recalc flags in id->recalc and clear accumulated flags
immediately. Not clearing would cause circular behavior where accumulated
flags may never end up being cleared.
This matches what happens after an undo push where these are also cleared,
indicating that the undo state and current in-memory state match exactly.
* Don't change id->recalc of identical datablocks, it should not be needed.
There is one exception for armatures where pointers across datablocks
exist which otherwise would cause problems. There may be a better solution
to this but it seems to work in agent 327 production files.
* This contains a change in undofile.c to avoid detecting all datablocks as
changed for the first of the two undo steps, where we restore to the state
of the last undo push before going to the one before.
Without this the whole system is much less efficient. However this is unsafe
in the sense that if an app handler or operators edits a datablock after an
undo push, that change will not be undone.
It can be argued that this is acceptable behavior, since a following undo push
will include that change and this may already have unexpected side effects.
Ref T60695
Differential Revision: https://developer.blender.org/D7339
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
The files are now split up into the following sections:
- `BKE_anim_path.h` and `anim_path.c` for path/curve functions.
- `BKE_anim_visualization.h` and `anim_visualizationanim_path.c` for
animation visualization (mostly motion paths).
- `BKE_duplilist.h` for DupliList function declarations. These were
already implemented in `object_dupli.c`, so they were rather out of
place being declared in `BKE_anim.h` in the first place.
No functional changes.
Modify the view layer add operator (and underlying `BKE_view_layer_add`)
to allow for copying the current view layer, as well as adding a new one
but with all LayerCollections disabled by default (this is important for
heavy scenes where currently adding view layers can take a long time due
to enabling every collection by default).
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6862
Extract will steal all depsgraphs currently stored in given bmain, and
restore will put them back in place, using scene and viewlayers as keys.
Preliminary work for undo-speedup.
Part of T60695/D6580.
We implement cubemap array support for EEVEE's lightcache reflection probes.
This removes stretched texels and bottom hemisphere seams artifacts caused
by the octahedral projection previously used.
This introduce versioning code for the lightcache which will discard any
lightcache version that is not compatible.
Differential Revision: https://developer.blender.org/D7066
This has been long standing TODO...
Note that remaining usages of BKE_xxx_delete should all be carefully
checked for and utilmately nuked in favor of `BKE_id_delete()`, think we
still have quiet a few bugs hidden in those (code seems to usually
assume those functions do a full ID deletion, which is not the case).
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
Instead of using anonymous booleans flags, also allows to keep the same
behavior in all cases, without needing special handling from calling
code for our beloved oddballs object proxies...
This was an old bug which could be caused by saving after separating.
Changes from 79b703bb63 made this fail reliably.
Update shape key indices when they may be used again later.
Custom profiles in bevel allows the profile curve to be controlled by
manually placed control points. Orientation is regularized along
groups of edges, and the 'pipe case' is updated. This commit includes
many updates to comments and changed variable names as well.
A 'cutoff' vertex mesh method is added to bevel in addition to the
existing grid fill option for replacing vertices.
The UI of the bevel modifier and tool are updated and unified.
Also, a 'CurveProfile' widget is added to BKE for defining the profile
in the interface, which may be useful in other situations.
Many thanks to Howard, my mentor for this GSoC project.
Reviewers: howardt, campbellbarton
Differential Revision: https://developer.blender.org/D5516
Side-reported in T70505.
Code did not ensure deleted object was removed from the RBW constraints
collection, leading to some invalid status (object in constraints
collection but without relevant contraints data).
Also fixed another issue - code deleting RBW objects would try to remove
any constraint one using it as target, in a very bad and broken way,
since you cannot iterate over objects of a collection while removing
some... Now instead just NULLify relevant pointers... I hope it works,
otherwise we'll have to take a different approach.
Needless to stress again how weak the whole RBW code is in general, and
regarding same object being used by RBW in more than one scene in particular,
that is known broken situation anyway.
