This adds a new Material Assign node. It can be used to change the
material used by an existing mesh or to assign a material to a mesh
that has been generated from scratch.
Differential Revision: https://developer.blender.org/D11155
This fixes the `Apply Modifier` and `Visual Geometry to Mesh` operator
when a modifier changed materials on the evaluated geometry.
This is necessary since rB1a81d268a19f2f1402f408ad1dadf92c7a399607.
Differential Revision: https://developer.blender.org/D11303
The old geometry nodes evaluator was quite basic and missed many features.
It was useful to get the geometry nodes project started. However, nowadays
we run into its limitations from time to time.
The new evaluator is more complex, but comes with new capabilities.
The two most important capabilities are that it can now execute nodes in
parallel and it supports lazy evaluation.
The performance improvement by multi-threading depends a lot on the specific
node tree. In our demo files, the speedup is measurable but not huge. This
is mainly because they are bottlenecked by one or two nodes that have to be
executed one after the other (often the Boolean or Attribute Proximity nodes)
or because the bottleneck is multi-threaded already (often openvdb nodes).
Lazy evaluation of inputs is only supported by the Switch node for now.
Previously, geometry nodes would always compute both inputs and then just
discard the one that is not used. Now, only the input that is required
is computed.
For some more details read D11191, T87620 and the in-code documentation.
Differential Revision: https://developer.blender.org/D11191
This feature of `select_side_of_frame` was disabled by removing option
from operator property enum but functional code was never removed.
Add back option to use this feature.
Feature was disabled due to keymap issue. Currently this feature doesn't
have keymap assigned.
Due to misunderstanding of how strip duplication works, animation data
was duplicated on all strips when any strip was split.
`SEQ_sequence_base_dupli_recursive()` duplicated data on strip that was
being split, and `SEQ_ensure_unique_name()` duplicated animation on all
strips.
Only duplication should be done with `SEQ_ensure_unique_name()` and only
on right side split strips, because only these strips are duplicated.
Fix issue described in T87678, which was partially a bug and partially
change in intended(at least as far as I can tell) behaior.
Function `evaluate_seq_frame_gen` that was partially responsible for
filtering strips in stack for rendering wasn't working correctly.
Intended functionality seems to be removing all effect inputs from stack
as it is unlikely that user would want these to be blended in. However
there was logic to exclude effects placed into same input, which because
of weak implementation caused, that any effect input, that is effect as
well will be considered to be part of stack to be blended in.
This bug was apparently used to produce effects like glow over original
image.
Even though this is originally unintended, I have kept this logic, but
I have made it explicit.
Another change is request made in T87678 to make it possible to keep
effect inputs as part of stack when they are placed above the effect,
which would imply that blending is intended. This change is again
explicitly defined.
Whole implementation has been refactored, so logic is consolidated
and code should be as explicit as possible and more readable.
`must_render_strip function` may be still quite hard to read, not sure
if I can make it nicer.
Last change is for remove gaps feature code - it used same rendering
code, which may be reason why its logic was split in first place.
Now it uses sequencer iterator, which will definitely be faster than
original code, but I could have used `LISTBASE_FOREACH` in this case.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11301
Recently `SEQ_sort()` function was split so functionality is provided
on per-seqbase basis. After discussion about this split, it turned out,
that per-seqbase operation is only that should be provided, because
RNA API functions need to be able to access arbitrary seqbase
Remove recently introduced function `seq_sort_seqbase` and change
`SEQ_sort` function to operate on seqbase.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11297
After this commit, all geometry node "init" and "update" functions are
at the top of each file, right below the "layout" function. This means
you can always scroll to the bottom of the file to see the entry point,
and the boring boilerplate code is grouped in one section.
With this patch you will be able to add and remove attributes from curve
data inside of geometry nodes. The following is currently implemented:
* Adding attributes with any data type to splines or spline points.
* Support for working with multiple splines at the same time.
* Interaction with the three builtin point attributes.
* Resampling attributes in the resample node.
The following is not implemented in this patch:
* Joining attributes when joining splines with the join geometry node.
* Domain interpolation between spline and point domains.
* More efficient ways to call attribute operations once per spline.
Differential Revision: https://developer.blender.org/D11251
Textures may be important to be able to identify an object. They are also a way
to make many objects look more like when rendered with an advanced render
engine, without being that expensive.
So this seems like a simple way to increase usefulness of the automatic
previews.
While this function should (currently) not be called on linked ID, there
is no reason to treat those differently than local IDs, for the part
that they have in common: needs to be properly sorted.
`id_sort_by_name` would simply not deal properly with linked IDs, could
lead to mixing IDs from different libraries, and unsorted IDs within the
same library.
Note that while sorting of local IDs is fine, currently sorting of
linked IDs is a total unpredictable failure.
Next commit will fix this, ensuring that linked IDs are grouped by their
library, and properly name-sorted within this library group.
This patch turns off the creation of file thumbnails for files that are
offline and therefore not fully-present on the file system. These types
of files - typically cloud-based or stored on slower backup media -
only have their contents available when actually accessed, at which
point there will be a short delay. If we allow thumbnail creation in
this state then all offline files in a folder will be downloaded just
to view a listing, which can take a long time.
Files in this state will instead get a more generic thumbnail that
still indicates file type (icon in center) and that shows offline state
will a special icon at the bottom-left.
Although this currently only affects Windows users, most of this patch
is platform-agnostic. So other platforms inherit this behavior if they
only add FILE_ATTR_OFFLINE attribute to files in this state.
See D11101 for more information.
Differential Revision: https://developer.blender.org/D11101
Reviewed by Julian Eisel
Fix T88167.
Caused by {rB97defd9cd79b6e3ed0e52481a7078107dbe0522b}
`(BLI_rcti_isect_pt` used here to confirm if cursor position is in between active region boundary.
Subtracting min region boundary from the mouse position before the check, fails the condition.
`mval[2]` introduced to hold the region relative mouse position.
Reviewed By: Severin
Maniphest Tasks: T88167
Differential Revision: https://developer.blender.org/D11224
Changes output for geometry info node in Eevee to be consistent with Cycles (w/o osl)
Before this patch Eevee outputs Z-tangent even for hair. This patch changes it to output hair tangent (growth direction). Hair tangent is impossible to derive otherwise from normal or view direction.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D10841
This commit allows that the evaluated geometry of an object has
different materials from the original geometry. This is needed
for geometry nodes.
The main thing that changes for render engines and exporters
is that the number of material slots on an object and its geometry
might not match anymore. For original data, the slot counts are
still equal, but not for evaluated data.
Accessing material slots though rna stays the same. The behavior
adapts automatically depending on whether the object is evaluated.
When accessing materials of an object through `BKE_object_material_*`
one has to use a new api for evaluated objects:
`BKE_object_material_get_eval` and `BKE_object_material_count_eval`.
In the future, the different behavior might be hidden behind a more
general C api, but that would require quite a few more changes.
The ground truth for the number of materials is the number of materials
on the geometry now. This is important in the current design, because
Eevee needs to know the number of materials just based on the mesh in
`mesh_render_mat_len_get` and similar places.
In a few places I had to add a special case for mesh edit mode to get it
to work properly. This is unfortunate, but I don't see a way around that
for now.
Differential Revision: https://developer.blender.org/D11236
This is caused by lacking of consideration of
OB_DUPLICOLLECTION in updateDepsgraph() in the
modifier.
Reviewed by: Antonio Vazquez (antoniov)
https://developer.blender.org/D11292
Splitting of effect strip alone wasn't handled properly. Previously
this resulted in duplicating effect strip, and it was broken at least
from 2.79.
Change in rB8ec6b34b8eb2 was intended to allow splitting strips
individually, so it can be used as RNA API function but also so it
requires as little glue logic as possible.
This is fixed by splitting all dependent strips at once in 2 separate
ListBases for left and right strips. Strips can be finally moved into
original `ListBase`.
With this fix it is still possible to split strips individually with
little glue logic. RNA API function could return list of split strips
as well, currently at least one strip in chain will be provided so
chain can be reconstructed on python side.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10209
Python API function Sequence.move_to_meta() did delete effect chain
when strip with effects was moved.
Use iterator API to query effect strips and move whole chain to meta.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11206
Read and write generated coordinates (also known as "original
coordinates", "reference coordinates", or "orcos") from and to Alembic.
A custom geometry property named "Pref" is used for (hopefully)
interoperability with Maya and Houdini. For now it's only guaranteed for
Blender-to-Blender.
Export: writing generated coordinates is optional (on by default).
Import: generated coordinates are always read whenever the reading of
vertex data is enabled.
Manifest Task: T88081
Copying an ID outside of BMain should not assume that the datablocks it
uses are now directly linked. This would be wrong e.g. in case that new
no-main ID is copied from a linked data-block and is supposed to remain
a linked data.
Value of the size argument in `strncat` is too large, might lead to a
buffer overflow.
Change the argument to be the free space in the destination buffer
minus the terminating null byte.
Introduced in 5368859a66
Reviewed By: Sergey
Differential Revision: https://developer.blender.org/D11289
