This was a feature request from a few years back (IIRC from ZanQdo?) to make it
easier to reuse one set of driver variables across several different drivers.
Dev Notes:
* Finally it's done! All that trouble for two little buttons.
* Grr... cmake... grrr!
* This includes the "manually create" modes, which correspond to the previous behaviour
for setting up drivers. This is necessary when the current screen layout is not
well suited to having multiple property editors open (e.g. small screen or heavily
subdivided screen).
* Only the modes relevant for the current property type (i.e. array vs single)
will be shown
* The "Add Driver" entries in the RMB context menu have now been replaced by a
submenu which will list all the available mapping types.
* NOTE: The code for the ANIM_OT_button_driver_add() operator is perhaps a bit hairy.
However, it currently allows us to have the desired behaviour. It can always get
cleaned up later though.
When linking a rotation property to a non-rotation property (going in either
direction - i.e. rot -> normal, normal -> rot), the driver expression will
now be set so that the new drivers behave as expected (i.e. you get the values
you see, instead of "weird" values that seem several orders of magnitude off).
This may not be that great for everyone (i.e. the rare users out there who
actually like to look at their rotations in radians), but they usually know
what they're doing anyway, so this will be easy to correct.
Although it isn't currently exposed, this allows for the old behaviour,
where an "empty" driver was added (without any target assigned yet).
For this reason, it's also referred to as the "Manual" mode.
There are also some attempts at improving the tooltips + names for the
other modes (again, not shown anywhere yet)
This commit brings some long requested improvements to the workflow for setting up
drivers, which should make it easier and faster to set up new drivers in a more
interactive fashion.
The new workflow is as follows:
1) Hover over the property (e.g. "Lamp Energy" or "Y Location") or properties ("Rotation")
you wish to add drivers to. We'll refer to this as the "destination"
2) Ctrl-D to active the new "Add Drivers" eyedropper
3) Click on the property you want to use as the source/target. The property under the
mouse will be used to drive the property you invoked Ctrl-D on.
For example, to drive the X, Y, and Z location of the Cube using the Y Location of the Lamp,
hover over any of the X/Y/Z location buttons, hit Ctrl-D, then click on the Y-Location
button of the Lamp object. Drivers will be added to the X, Y, and Z Location properties
of the Cube; each driver will have a single variable, which uses the Y-Location Transform
Channel of the Lamp.
Tips:
- Transform properties will automatically create "Transform Channel" driver variables.
Everything else will use "Single Property" ones
- Due to the way that Blender's UI Context works, you'll need two Properties Panel instances
open (and to have pinned one of the two to show the properties for the unselected
object). It's slightly clunky, but necessary for implementing a workflow like this,
as the UI cannot be manipulated while using eyedroppers to pick data.
- The eyedropper operator implemented here actually has three modes of operation.
1) The "1-N" (one to many) mode is the default used for Ctrl-D, and "Add Driver to All"
in the RMB Menu. This is the behaviour described above.
2) There's also a "1-1" (one to one) mode that is used for the "Add Single Driver" in the
RMB Menu.
3) Finally, there's the "N-N" mode (many to many), which isn't currently exposed.
The point of this is to allow mapping XYZ to XYZ elementwise (i.e. direct copying)
which is useful for things like locations, rotations, scaling, and colours.
Implementation Notes:
- The bulk of the driver adding logic is in editors/animation/drivers.c, where most of
the Driver UI operators and tools are defined
- The property eyedropper code is in interface_eyedropper.c along with all the other
eyedroppers (even though they don't share much actual code in common). However, this
turns out to be necessary, as we can't get access to many of the low-level buttons API's
otherwise.
Todo:
- It may be necessary to restore a way to access the old behaviour (i.e. "manual setup")
in case it is not practical to immediately pick a property.
- Other things to investigate here include extra hotkeys (e.g. Ctrl-Shift-D for Add Single?),
and to expose the N-N mode.
- Other things we could try include interactively applying scaling factors, picking
multiple targets (e.g. for location difference and rotation difference drivers),
and/or other ways of using these property picking methods.
Now, when trying to insert a keyframe on a driven property (using IKEY, or with
autokeying enabled), the keyframes will get created on the Driver's F-Curve
(instead of creating a new FCurve that goes into the active action, but will never
do anything). Furthermore, the x-value of the new keyframe will be the current
result of the driver expression.
Why/Motivations:
This way, it becomes easier to create corrective drivers, as you can position all
the targets the driver depends on, then adjust the driver value until it does what
you need, and then you keyframe that value to bake it into the Driver F-Curve
(in effect, "training" the computer how to behave in that case).
Usage Notes:
* In practice, that particular workflow is still quite clunky to achieve, due to some
quirks of how the driver system and the UI widgets interact. Specifically, you'll
need to disable/mute the driver before trying to edit the setting (to prevent the
driver from immediately resetting the value - before even autokey fires!). However,
if you're using the Graph Editor to preview/monitor/manage the keying process, you'll
then want to re-enable the driver before changing the targets, so that you can see
how much of a change you'll want to be applying!
* The warning about editing driver values may need to be disabled or selectively
knocked out. I had it disabled while testing this functionality, but it's actually
harmless in its current state (if just a bit annoying).
Thanks to D1080 by @rockets, I've now been able to easily implement the
ability to type multiple word snippets/partial words into the text filter
field (in the Animation Editors), and have it filter the channels which
contain just some of those parts (instead of having to match everything).
For example, the following search strings will now work:
* "loc rot" or "lo ro" will now filter all location and rotation FCurves
* "col loc" will filter all location and color FCurves
* "scale" will also work as before to filter all scale FCurves
But, the following will not work:
* "lc rt" will NOT filter all location and rotation, as the fuzzy search only
breaks down the search string based on whitespace placement
By default, this is not enabled when using name filtering (i.e. magnifying glass is checked,
and some filtering text is specified). Instead, you need to enable the "AZ" toggle beside
the name field. This fuzzy matching is not enabled by default as it could end up being
quite a bit slower on really heavy scenes. (There are probably some optimisation
opportunities, but that's only a future option if someone really needs it)
To make it easier for animators working in a multipass pose-to-pose workflow
when inserting breakdown keyframes and so forth, it is now possible to specify
the "type" of keyframe being created (i.e. the colour of the keyframe, when drawn
in the Dope Sheet).
Usage:
1) Choose the type of keyframe ("Keyframe", "Breakdown", "Extreme", etc.) from
the new dropdown located between the AutoKeying and KeyingSet widgets on the
timeline header.
2) Insert keyframes
3) Rejoyce that your newly created keyframes have now been coloured for you already
in the DopeSheet.
Todo:
* Look into a way of using the actual keyframe colours (from the theme) for the icons
of these types.
This may have resulted in situations where the order of GP keyframes was
incorrect (leading to some frames not being able to be found), or in some
redraw problems when trying to delete GP keyframes (that I was getting earlier,
but can't seem to reproduce now)
TODO: We now need to hook up a proper api to do the GP key sorting
In the other Dopesheet modes, the "Speaker" icon was used to refer to
"animation playback muting", while for GP layers, this was being incorrectly
abused for "layer visibility in viewport".
This commit fixes that by making the following changes:
* A new "eye" icon toggle is added for controlling GP Layer visibility
* The "speaker" icon toggle now controls "Lock Frame to Current" functionality,
which functions more like the "animation playback muting" that is generally
expected.
When in TweakMode on NLA strips that had an offset, it was not possible to select
those keyframes in the Summary Channel in the Dope Sheet.
The main gist of it is that the current code is from before the summary track was
introduced, and so could assume that ANIM_nla_mapping_get() would work for all channels
present. Thus, simply converting the clicked frame to nla-mapped time once would be
enough. However, for summary channels, nla-mapping_get() doesn't do anything, since
we can potentially include keyframes from several different objects!
Debug print here is not that useful to common user, and keyframe deletion
does report warning, so do the same for clear op.
Reported by venomgfx over IRC, thanks.
Each LINES draw call is now responsible for its own line width. No need
to set it back to its 1.0 default after every draw.
This eliminates half our calls to glLineWidth , similar to last week’s
work on glPointSize.
While SCons building system was serving us really good for ages it's no longer
having much attention by the developers and started to become quite a difficult
task to maintain.
What's even worse -- there started to be quite serious divergence between SCons
and CMake which was only accumulating over the releases now. The fact that none
of the active developers are really using SCons and that our main studio is also
using CMake spotting bugs in the SCons builds became quite a difficult task and
we aren't always spotting them in time.
Meanwhile CMake became really mature building system which is available on every
platform we support and arguably it's also easier and more robust to use.
This commit includes:
- Removal of actual SCons building system
- Removal of SCons git submodule
- Removal of documentation which is stored in the sources and covers SCons
- Tweaks to the buildbot master to stop using SCons submodule
(this change requires deploying to the server)
- Tweaks to the install dependencies script to skip installing or mentioning
SCons building system
- Tweaks to various helper scripts to avoid mention of SCons folders/files
as well
Reviewers: mont29, dingto, dfelinto, lukastoenne, lukasstockner97, brecht, Severin, merwin, aligorith, psy-fi, campbellbarton, juicyfruit
Reviewed By: campbellbarton, juicyfruit
Differential Revision: https://developer.blender.org/D1680
This is purely internal sanitizing/cleanup, no change in behavior is expected at all.
This change was also needed because we were getting short on ID flags, and
future enhancement of 'user_one' ID behavior requires two new ones.
id->flag remains for persistent data (fakeuser only, so far!), this also allows us
100% backward & forward compatibility.
New id->tag is used for most flags. Though written in .blend files, its content
is cleared at read time.
Note that .blend file version was bumped, so that we can clear runtimeflags from
old .blends, important in case we add new persistent flags in future.
Also, behavior of tags (either status ones, or whether they need to be cleared before/after use)
has been added as comments to their declaration.
Reviewers: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D1683
Technically this was more of a feature request, but now the Alt-I operator will
only remove keyframes related to selected bones in Pose Mode. In Object Mode,
it will continue to operate on all keyframes of the object.
This change makes this operator more meaningful when animating in the 3D view.
When using the "Current Frame" options for these operators, the Cursor X value
will now be used instead of the current frame. Perhaps the labels could be changed
too, but for now, I guess this will be good enough.
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
Sliders in for FCurves in the animation editors were leaving space for
one extra setting that they didn't need to be accounting for (and which
wasn't shown, as it isn't valid for FCurves).
The issue was caused by the following construction:
def = env['SOMETHING']
defs.append('SOMETHING_MORE')
Since first assignment was actually referencing environment option it was totally
polluted hawing weird and wonderful side effects on all other areas of Blender.
After scrubbing, Blender kept thinking an animation is played (see animation "Play" button), even after mouse release. This resulted in a couple of crashes, e.g. by pressing Alt+a and then Esc.
(Also minor cleanup)
