There should be no user visible change from this, except that tile size
now affects performance. The goal here is to simplify bake denoising in
D3099, letting it reuse more denoising tiles and pass code.
A lot of code is now shared with regular rendering, with the two main
differences being that we read some render result passes from the bake API
when starting to render a tile, and call the bake kernel instead of the
path trace kernel.
With this kind of design where Cycles asks for tiles from the bake API,
it should eventually be easier to reduce memory usage, show tiles as
they are baked, or bake multiple passes at once, though there's still
quite some work needed for that.
Reviewers: #cycles
Subscribers: monio, wmatyjewicz, lukasstockner97, michaelknubben
Differential Revision: https://developer.blender.org/D3108
This feature takes some inspiration from
"RenderMan: An Advanced Path Tracing Architecture for Movie Rendering" and
"A Hierarchical Automatic Stopping Condition for Monte Carlo Global Illumination"
The basic principle is as follows:
While samples are being added to a pixel, the adaptive sampler writes half
of the samples to a separate buffer. This gives it two separate estimates
of the same pixel, and by comparing their difference it estimates convergence.
Once convergence drops below a given threshold, the pixel is considered done.
When a pixel has not converged yet and needs more samples than the minimum,
its immediate neighbors are also set to take more samples. This is done in order
to more reliably detect sharp features such as caustics. A 3x3 box filter that
is run periodically over the tile buffer is used for that purpose.
After a tile has finished rendering, the values of all passes are scaled as if
they were rendered with the full number of samples. This way, any code operating
on these buffers, for example the denoiser, does not need to be changed for
per-pixel sample counts.
Reviewed By: brecht, #cycles
Differential Revision: https://developer.blender.org/D4686
This fixes denoising being delayed until after all rendering has finished. Instead, tile-based
denoising is now part of the "RENDER" task again, so that it is all in one task and does not
cause issues with dedicated task pools where tasks are serialized.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6940
MSVC does not have -march=native, so the kernel gets built without AVX2 and
BVH8 support. The code assumed it to be available and crashed
Differential Revision: https://developer.blender.org/D6082
The OptiX denoiser can be a great help when rendering in the viewport, since it is really fast
and needs few samples to produce convincing results. This patch therefore adds support for
using any Cycles denoiser in the viewport also (but only the OptiX one is selectable because
the NLM one is too slow to be usable currently). It also adds support for denoising on a
different device than rendering (so one can e.g. render with the CPU but denoise with OptiX).
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D6554
Before there were two options: Paste to original layer called "Paste" and Paste to active layer called "Paste & Merge"
Now, by default the paste is in active layer and the "Paste & Merge" has been renamed "Paste".
For old "Paste", now is called "Paste by Layer" and it's not the default value anymore.
Note: Minor edits to add icons not present in Differential revision.
Differential Revision: https://developer.blender.org/D5591
x64 builds with WITH_CYCLES_OPTIMIZED_KERNEL_SSE2 not defined
since SSE2 is the lower bar for x64 cpus. Turning the architecture
logging related if into the last if in the architecture detection
chain, which will never execute unless you turn off all kernels
in de debug flags.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5579
The issue was caused by un-initialized local storage for volume
intersection hits which are supposed to be stored in per-thread
KernelGlobals.
Fix is to make thread_shader() be the same as thread_render() in
respect of KernelGlobals.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5230
The kernel does not use AVX2 vectorization, and trying to use BVH8 was
leading to an empty scenes.
Fixes T64624: Ctest : Win32 + AVX2 fails virtually all cycles tests
This adds our own OSL texture handle, that has info for OIIO textures or our
own custom texture types. A filename to handle hash map is used for lookups.
This is efficient because it happens at OSL compile time, because the optimizer
can figure out constant strings and replace them with texture handles.
It's effectively always enabled, only not on some unsupported OpenCL devices.
For testing those it's not useful to disable these features. This is replaced
by the more fine grained feature toggles that we have now.
This is the internal implementation, not available from the API or
interface yet. The algorithm takes into account past and future frames,
both to get more coherent animation and reduce noise.
Ref D3889.
Prefiltering of feature passes will happen during rendering, which can
then be used for denoising immediately or written as a render pass for
later (animation) denoising.
The number of denoising data passes written is reduced because of this,
leaving out the feature variance passes. The passes are now Normal,
Albedo, Depth, Shadowing, Variance and Intensity.
Ref D3889.
This commit adds a sample-based profiler that runs during CPU rendering and collects statistics on time spent in different parts of the kernel (ray intersection, shader evaluation etc.) as well as time spent per material and object.
The results are currently not exposed in the user interface or per Python yet, to see the stats on the console pass the "--cycles-print-stats" argument to Cycles (e.g. "./blender -- --cycles-print-stats").
Unfortunately, there is no clear way to extend this functionality to CUDA or OpenCL, so it is CPU-only for now.
Reviewers: brecht, sergey, swerner
Reviewed By: brecht, swerner
Differential Revision: https://developer.blender.org/D3892
Note that this is turned off by default and must be enabled at build time with the CMake WITH_CYCLES_EMBREE flag.
Embree must be built as a static library with ray masking turned on, the `make deps` scripts have been updated accordingly.
There, Embree is off by default too and must be enabled with the WITH_EMBREE flag.
Using Embree allows for much faster rendering of deformation motion blur while reducing the memory footprint.
TODO: GPU implementation, deduplication of data, leveraging more of Embrees features (e.g. tessellation cache).
Differential Revision: https://developer.blender.org/D3682
Mainly useful for debugging. Previously, when AVX2 was disabled
in the debug panel but BVH layout was kept on BVH8 nothing was
rendered.
Needed to make it so supported BVH layout mask for devices is
queried in "dynamic", so it is possible to use DebugFlags there.
This allows for extra output passes that encode automatic object and material masks
for the entire scene. It is an implementation of the Cryptomatte standard as
introduced by Psyop. A good future extension would be to add a manifest to the
export and to do plenty of testing to ensure that it is fully compatible with other
renderers and compositing programs that use Cryptomatte.
Internally, it adds the ability for Cycles to have several passes of the same type
that are distinguished by their name.
Differential Revision: https://developer.blender.org/D3538
This is an initial implementation of BVH8 optimization structure
and packated triangle intersection. The aim is to get faster ray
to scene intersection checks.
Scene BVH4 BVH8
barbershop_interior 10:24.94 10:10.74
bmw27 02:41.25 02:38.83
classroom 08:16.49 07:56.15
fishy_cat 04:24.56 04:17.29
koro 06:03.06 06:01.45
pavillon_barcelona 09:21.26 09:02.98
victor 23:39.65 22:53.71
As memory goes, peak usage raises by about 4.7% in a complex
scenes.
Note that BVH8 is disabled when using OSL, this is because OSL
kernel does not get per-microarchitecture optimizations and
hence always considers BVH3 is used.
Original BVH8 patch from Anton Gavrikov.
Batched triangles intersection from Victoria Zhislina.
Extra work and tests and fixes from Maxym Dmytrychenko.
With small tiles, the repeated allocations on GPUs can actually slow down the denoising quite a lot.
Allocating the buffer just once reduces rendertime for the default cube with 16x16 tiles and denoising on a mobile 1050 from 22.7sec to 14.0sec.
This deduplicates the calls for tile (un)mapping and allows to have a target buffer that is different from the source buffer (needed for baking and animation denoising).
The latest clang compiler (at least the one in Xcode 9.4.1) warns about the register keyword and macro expansions using defined().
Since these warnings come from third party code, we can't address them directly in Blender. Silencing them via #pramgas will
at least keep the warnings during a build down to the ones that are relevant to Blender code.
We should actually be using CL_DEVICE_MEM_BASE_ADDR_ALIGN for sub buffers,
previous change in this code was incorrect. Renamed the function now to
make the specific purpose of this alignment clear, it's not required for
data types in general.
