Pydoc: Fix multiple bpy.type modules

Takes information from the manual and dumps it here.

.arcconfig

@@ -1,8 +1,6 @@
 {
 	"project_id" : "Blender",
 	"conduit_uri" : "https://developer.blender.org/",
-	"phabricator.uri" : "https://developer.blender.org/",
 	"git.default-relative-commit" : "origin/master",
-	"arc.land.update.default" : "rebase",
-	"arc.land.onto.default" : "master"
+	"arc.land.update.default" : "rebase"
 }

.clang-format

@@ -1,273 +0,0 @@
-
-# Configuration of clang-format
-# =============================
-#
-# Tested to work with versions: 8 to 11.
-
-# This causes parameters on continuations to align to the opening brace.
-#
-#   like_this_long_name(parameter_one,
-#                       parameter_two,
-#                       parameter_three);
-#
-AlignAfterOpenBracket: 'Align'
-
-# Disallow short functions on one line; break them up.
-AllowShortBlocksOnASingleLine: false
-
-# These two settings trigger stacking of parameters in most cases; this is
-# easier to read and also makes diffs easier to read (since an added or removed
-# parameter is obvious). For example, function calls will look like this:
-#
-#   like_this_long_name(parameter_one,
-#                       parameter_two,
-#                       parameter_three,
-#                       parameter_four,
-#                       parameter_five,
-#                       parameter_six);
-#
-# Instead of:
-#
-#   like_this_long_name(parameter_one, parameter_two, parameter_three, parameter_four,
-#                       parameter_five, parameter_six);
-#
-BinPackArguments: false
-BinPackParameters: false
-
-# Line width (don't exceed 100).
-ColumnLimit: 99
-
-# Cause initializer lists to have one member initialized per line, in the case
-# that all initializers can't fit on a single line.
-ConstructorInitializerAllOnOneLineOrOnePerLine: true
-
-# Indent the : after a constructor. For example:
-#
-#   explicit foo_class ()
-#       : member1_(5)
-#   {
-#   }
-#
-ConstructorInitializerIndentWidth: 4
-
-# Make access modifier slightly more visible.
-AccessModifierOffset: -1
-
-# This will unfortunately use spaces in some cases where it's not desired (like
-# function calls) but the overall result is better since it will allow
-# alignment to work properly with different tab width settings.
-ContinuationIndentWidth: 4
-
-# This tries to match Blender's style as much as possible. One
-BreakBeforeBraces: Custom
-BraceWrapping: {
-    AfterClass: 'false'
-    AfterControlStatement: 'false'
-    AfterEnum : 'false'
-    AfterFunction : 'true'
-    AfterNamespace : 'false'
-    AfterStruct : 'false'
-    AfterUnion : 'false'
-    BeforeCatch : 'true'
-    BeforeElse : 'true'
-    IndentBraces : 'false'
-    AfterObjCDeclaration: 'true'
-}
-
-# For switch statements, indent the cases.
-IndentCaseLabels: true
-
-# Indent after the hash inside preprocessor directives
-IndentPPDirectives: AfterHash
-
-BreakBeforeTernaryOperators: false
-
-SpaceAfterTemplateKeyword: false
-
-# Handy comment at the end of each C++ name space.
-FixNamespaceComments: true
-
-# Use "if (...)" instead of "if(...)", but have function calls like foo().
-SpaceBeforeParens: ControlStatements
-SpaceInEmptyParentheses: false
-
-# Use two spaces before trailing comments, for example
-#
-#   foo = bar;  // comment
-#
-# Note that this doesn't work for C-style comments.
-SpacesBeforeTrailingComments: 2
-
-# Reflow comments, developers must disable formatting as with code to override this.
-ReflowComments: true
-
-# Never use tabs for indentation.
-# Note: TabWidth and IndentWidth must be the same, or strange things happen.
-UseTab: Never
-TabWidth: 2
-IndentWidth: 2
-
-# Add a big penalty on breaking after the return type of functions. For example,
-#
-#   static void foo(...)
-#
-# Instead of:
-#
-#   static void
-#   foo(very long content here that maybe could be stacked)
-#
-PenaltyReturnTypeOnItsOwnLine: 10000
-
-# Avoid having function calls broken onto a new line:
-#
-#   int a = foo(
-#       long, list, of, many, params);
-#
-# Instead of:
-#
-#   int a =
-#       foo(long, list, of, many, params);
-#
-PenaltyBreakAssignment: 100
-
-AllowShortFunctionsOnASingleLine: None
-
-SortIncludes: true
-
-# Don't right align escaped newlines to the right because we have a wide default
-AlignEscapedNewlines: DontAlign
-
-# Always break:
-#
-#   const char *foo =
-#       "multi"
-#       "line";
-#
-# Instead of:
-#
-#   const char *foo = "multi"
-#                     "line";
-#
-AlwaysBreakBeforeMultilineStrings: true
-
-# We don't want literal strings to break,
-# however clang-format seems to ignore this (sigh).
-PenaltyBreakString: 1000000
-
-# There are macros in Blender for custom for loops; tell Clang to treat them
-# like loops rather than an expression, and so put the { on the same line.
-#
-# To find these use multi-line regex search:
-# "^\s+[A-Z][A-Z0-9_]+\s*\([^\n]*\)\n\s*\{"
-ForEachMacros:
-  - BEGIN_ANIMFILTER_SUBCHANNELS
-  - BKE_pbvh_vertex_iter_begin
-  - BLI_FOREACH_SPARSE_RANGE
-  - BLI_SMALLSTACK_ITER_BEGIN
-  - BMO_ITER
-  - BMO_ITER_INDEX
-  - BMW_ITER
-  - BM_FACES_OF_VERT_ITER_BEGIN
-  - BM_ITER_BPY_BM_SEQ
-  - BM_ITER_ELEM
-  - BM_ITER_ELEM_INDEX
-  - BM_ITER_MESH
-  - BM_ITER_MESH_INDEX
-  - BM_ITER_MESH_MUTABLE
-  - BM_LOOPS_OF_VERT_ITER_BEGIN
-  - BOOST_FOREACH
-  - CTX_DATA_BEGIN
-  - CTX_DATA_BEGIN_WITH_ID
-  - DEG_OBJECT_ITER_BEGIN
-  - DEG_OBJECT_ITER_FOR_RENDER_ENGINE_BEGIN
-  - DRW_ENABLED_ENGINE_ITER
-  - DRIVER_TARGETS_LOOPER_BEGIN
-  - DRIVER_TARGETS_USED_LOOPER_BEGIN
-  - FOREACH_BASE_IN_EDIT_MODE_BEGIN
-  - FOREACH_BASE_IN_MODE_BEGIN
-  - FOREACH_BEGIN
-  - FOREACH_COLLECTION_BEGIN
-  - FOREACH_COLLECTION_OBJECT_RECURSIVE_BEGIN
-  - FOREACH_COLLECTION_VISIBLE_OBJECT_RECURSIVE_BEGIN
-  - FOREACH_EDIT_OBJECT_BEGIN
-  - FOREACH_MAIN_ID_BEGIN
-  - FOREACH_MAIN_LISTBASE_BEGIN
-  - FOREACH_MAIN_LISTBASE_ID_BEGIN
-  - FOREACH_MESH_BUFFER_CACHE
-  - FOREACH_NODETREE_BEGIN
-  - FOREACH_OBJECT_BEGIN
-  - FOREACH_OBJECT_FLAG_BEGIN
-  - FOREACH_OBJECT_IN_EDIT_MODE_BEGIN
-  - FOREACH_OBJECT_IN_MODE_BEGIN
-  - FOREACH_OBJECT_RENDERABLE_BEGIN
-  - FOREACH_PCHAN_SELECTED_IN_OBJECT_BEGIN
-  - FOREACH_PCHAN_VISIBLE_IN_OBJECT_BEGIN
-  - FOREACH_SCENE_COLLECTION_BEGIN
-  - FOREACH_SCENE_OBJECT_BEGIN
-  - FOREACH_SELECTED_BASE_BEGIN
-  - FOREACH_SELECTED_EDITABLE_OBJECT_BEGIN
-  - FOREACH_SELECTED_OBJECT_BEGIN
-  - FOREACH_TRANS_DATA_CONTAINER
-  - FOREACH_VIEW_LAYER_TO_RENDER_BEGIN
-  - FOREACH_VISIBLE_BASE_BEGIN
-  - FOREACH_VISIBLE_OBJECT_BEGIN
-  - GHASH_FOREACH_BEGIN
-  - GHASH_ITER
-  - GHASH_ITER_INDEX
-  - GPU_SELECT_LOAD_IF_PICKSEL_LIST
-  - GP_EDITABLE_STROKES_BEGIN
-  - GP_EVALUATED_STROKES_BEGIN
-  - GSET_FOREACH_BEGIN
-  - GSET_ITER
-  - GSET_ITER_INDEX
-  - ITER_BEGIN
-  - ITER_PIXELS
-  - ITER_SLOTS
-  - ITER_SLOTS_BEGIN
-  - LOOP_EDITED_POINTS
-  - LOOP_KEYS
-  - LOOP_POINTS
-  - LOOP_SELECTED_KEYS
-  - LOOP_SELECTED_POINTS
-  - LOOP_TAGGED_KEYS
-  - LOOP_TAGGED_POINTS
-  - LOOP_UNSELECTED_POINTS
-  - LOOP_VISIBLE_KEYS
-  - LOOP_VISIBLE_POINTS
-  - LISTBASE_CIRCULAR_BACKWARD_BEGIN
-  - LISTBASE_CIRCULAR_FORWARD_BEGIN
-  - LISTBASE_FOREACH
-  - LISTBASE_FOREACH_BACKWARD
-  - LISTBASE_FOREACH_MUTABLE
-  - LISTBASE_FOREACH_BACKWARD_MUTABLE
-  - LISTBASE_FOREACH_INDEX
-  - MAN_ITER_AXES_BEGIN
-  - NODE_INSTANCE_HASH_ITER
-  - NODE_SOCKET_TYPES_BEGIN
-  - NODE_TREE_TYPES_BEGIN
-  - NODE_TYPES_BEGIN
-  - PIXEL_LOOPER_BEGIN
-  - PIXEL_LOOPER_BEGIN_CHANNELS
-  - RENDER_PASS_ITER_BEGIN
-  - RNA_BEGIN
-  - RNA_PROP_BEGIN
-  - RNA_STRUCT_BEGIN
-  - RNA_STRUCT_BEGIN_SKIP_RNA_TYPE
-  - SCULPT_VERTEX_DUPLICATES_AND_NEIGHBORS_ITER_BEGIN
-  - SCULPT_VERTEX_NEIGHBORS_ITER_BEGIN
-  - SEQ_ALL_BEGIN
-  - SEQ_ITERATOR_FOREACH
-  - SURFACE_QUAD_ITER_BEGIN
-  - foreach
-  - ED_screen_areas_iter
-  - SLOT_PROBING_BEGIN
-  - SET_SLOT_PROBING_BEGIN
-  - MAP_SLOT_PROBING_BEGIN
-  - VECTOR_SET_SLOT_PROBING_BEGIN
-
-StatementMacros:
-  - PyObject_HEAD
-  - PyObject_VAR_HEAD
-
-MacroBlockBegin: "^BSDF_CLOSURE_CLASS_BEGIN$"
-MacroBlockEnd: "^BSDF_CLOSURE_CLASS_END$"

.clang-tidy

@@ -1,52 +0,0 @@
-# The warnings below are disabled because they are too pedantic and not worth fixing.
-# Some of them will be enabled as part of the Clang-Tidy task, see T78535.
-
-Checks:  >
-  -*,
-  readability-*,
-  -readability-uppercase-literal-suffix,
-  -readability-magic-numbers,
-  -readability-isolate-declaration,
-  -readability-convert-member-functions-to-static,
-  -readability-implicit-bool-conversion,
-  -readability-avoid-const-params-in-decls,
-  -readability-simplify-boolean-expr,
-  -readability-make-member-function-const,
-  -readability-suspicious-call-argument,
-  -readability-redundant-member-init,
-
-  -readability-misleading-indentation,
-
-  -readability-use-anyofallof,
-
-  -readability-function-cognitive-complexity,
-
-  bugprone-*,
-  -bugprone-narrowing-conversions,
-  -bugprone-unhandled-self-assignment,
-  -bugprone-branch-clone,
-  -bugprone-macro-parentheses,
-  -bugprone-reserved-identifier,
-  -bugprone-easily-swappable-parameters,
-  -bugprone-implicit-widening-of-multiplication-result,
-
-  -bugprone-sizeof-expression,
-  -bugprone-integer-division,
-
-  -bugprone-redundant-branch-condition,
-
-  modernize-*,
-  -modernize-use-auto,
-  -modernize-use-trailing-return-type,
-  -modernize-avoid-c-arrays,
-  -modernize-use-nodiscard,
-  -modernize-loop-convert,
-  -modernize-pass-by-value,
-  # Cannot be enabled yet, because using raw string literals in tests breaks
-  # the windows compiler currently.
-  -modernize-raw-string-literal,
-  -modernize-return-braced-init-list
-
-CheckOptions:
-  - key: modernize-use-default-member-init.UseAssignment
-    value: 1

.editorconfig

@@ -1,53 +0,0 @@
-# C/C++
-[*.{c,cc,h,hh,inl,glsl}]
-charset = utf-8
-trim_trailing_whitespace = true
-insert_final_newline = true
-indent_style = space
-indent_size = 2
-max_line_length = 99
-
-# CMake & Text
-[*.{cmake,txt}]
-charset = utf-8
-trim_trailing_whitespace = true
-insert_final_newline = true
-indent_style = space
-indent_size = 2
-max_line_length = 99
-
-# Python
-[*.py]
-charset = utf-8
-trim_trailing_whitespace = true
-insert_final_newline = true
-indent_style = space
-indent_size = 4
-max_line_length = 120
-
-# Shell
-[*.sh]
-charset = utf-8
-trim_trailing_whitespace = true
-insert_final_newline = true
-indent_style = space
-indent_size = 2
-max_line_length = 99
-
-# reStructuredText
-[*.rst]
-charset = utf-8
-trim_trailing_whitespace = true
-insert_final_newline = true
-indent_style = space
-indent_size = 3
-max_line_length = 120
-
-# Makefile
-[{Makefile,GNUmakefile}]
-charset = utf-8
-trim_trailing_whitespace = true
-insert_final_newline = true
-indent_style = tab
-indent_size = 4
-max_line_length = 120

.git-blame-ignore-revs

@@ -1,104 +0,0 @@
-# git config blame.ignoreRevsFile .git-blame-ignore-revs
-#
-# After running the above, commits listed in this file will be
-# ignored by git blame. The blame will be shifted to the person
-# who edited the line(s) before the ignored commit.
-#
-# To disable this ignorance for a command, run as follows
-# git blame --ignore-revs-file="" <other options>
-#
-# Changes that belong here:
-# - Massive comment, doxy-sections, or spelling corrections.
-# - Clang-format, PEP8 or other automated changes which are *strictly* "no functional change".
-# - Several commits should be added to this list at once, because adding
-#   one extra commit (to edit this file) after every cleanup is noisy.
-# - No clang-tidy changes.
-#
-# Note:
-# - The comment above the SHA should be the first line of the commit.
-# - It is fine to pack together similar commits if they have the same explanatory comment.
-# - Use only 40 character git SHAs; not smaller ones, not prefixed with rB.
-#
-# https://git-scm.com/docs/git-blame/2.23.0
-
-# white space commit. (2 spaces -> tab).
-0a3694cd6ebec710da7110e9f168a72d47c71ee0
-
-# Cycles: Cleanup, spacing after preprocessor
-cb4b5e12abf1fc6cf9ffc0944e0a1bc406286c63
-
-# ClangFormat: apply to source, most of intern
-e12c08e8d170b7ca40f204a5b0423c23a9fbc2c1
-
-# Code Style: use "#pragma once" in source directory
-91694b9b58ab953f3b313be9389cc1303e472fc2
-
-# Code Style: use "#pragma once" in some newer headers
-8198dbb888856b8c11757586df02aca15f132f90
-
-# Code Style: use "#pragma once" in intern/ghost
-1b1129f82a9cf316b54fbc025f8cfcc1a74b8589
-
-# Cleanup: mostly comments, use doxy syntax & typos
-e0cb02587012b4b2f4b18363dc7d0a7da2c02093
-
-# Cleanup: use C comments for descriptive text
-2abfcebb0eb7989e3d1e7d03f37ecf5c088210af
-
-# use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
-afacd184982e58a9c830a3d5366e25983939a7ba
-
-# Spelling: It's Versus Its
-3a7fd309fce89213b0224b3c6807adb2d1fe7ca8
-
-# Spelling: Then Versus Than
-d1eefc421544e2ea632fb35cb6bcaade4c39ce6b
-
-# Spelling: Miscellaneous
-84ef3b80de4915a24a9fd2fd214d0fa44e59b854
-
-# Spelling: Loose Versus Lose
-c0a6bc19794c69843c38451c762e91bc10136e0f
-
-# Spelling: Apart Versus A Part
-3d26cd01b9ba6381eb165e11536345ae652dfb41
-
-# Cleanup: use 2 space indentation for CMake
-3076d95ba441cd32706a27d18922a30f8fd28b8a
-
-# Cleanup: use over-line for doxy comments
-4b188bb08cf5aaae3c68ab57bbcfa037eef1ac10
-
-# Cleanup: General comment style clean up of graph_edit.c and fcurve.c
-0105f146bb40bd609ccbda3d3f6aeb8e14ad3f9e
-
-# Cleanup: pep8 (indentation, spacing, long lines)
-41d2d6da0c96d351b47acb64d3e0decdba16cb16
-
-# Cleanup: pep8, blank lines
-bab9de2a52929fe2b45ecddb1eb09da3378e303b
-
-# Cleanup: PEP8 for python changes
-1e7e94588daa66483190f45a9de5e98228f80e05
-
-# GPencil: Cleanup pep8
-a09cc3ee1a99f2cd5040bbf30c8ab8c588bb2bb1
-
-# Cleanup: trailing space, remove tabs, pep8
-c42a6b77b52560d257279de2cb624b4ef2c0d24c
-
-# Cleanup: use C style doxygen comments
-8c1726918374e1d2d2123e17bae8db5aadde3433
-
-# Cleanup: use doxy sections for imbuf
-c207f7c22e1439e0b285fba5d2c072bdae23f981
-
-# Cleanup: clang-format
-c4d8f6a4a8ddc29ed27311ed7578b3c8c31399d2
-b5d310b569e07a937798a2d38539cfd290149f1c
-8c846cccd6bdfd3e90a695fabbf05f53e5466a57
-4eac03d821fa17546f562485f7d073813a5e5943
-1166110a9d66af9c5a47cee2be591f50fdc445e8
-
-# Cleanup: clang-format.
-40d4a4cb1a6b4c3c2a486e8f2868f547530e0811

.github/pull_request_template.md

@@ -1,5 +0,0 @@
-This repository is only used as a mirror of git.blender.org. Blender development happens on
-https://developer.blender.org.
-
-To get started with contributing code, please see:
-https://wiki.blender.org/wiki/Process/Contributing_Code

.github/stale.yml

@@ -1,22 +0,0 @@
-# Configuration for probot-stale - https://github.com/probot/stale
-# This file is used on Blender's GitHub mirror to automatically close any pull request
-# and invite contributors to join the official development platform on blender.org
-
-# Number of days of inactivity before an Issue or Pull Request becomes stale
-daysUntilStale: 1
-
-# Number of days of inactivity before an Issue or Pull Request with the stale label is closed.
-# Set to false to disable. If disabled, issues still need to be closed manually, but will remain marked as stale.
-daysUntilClose: 1
-
-# Label to use when marking as stale
-staleLabel: stale
-
-# Comment to post when closing a stale Issue or Pull Request.
-closeComment: >
-  This issue has been automatically closed, because this repository is only
-  used as a mirror of git.blender.org. Blender development happens on
-  developer.blender.org.
-
-  To get started contributing code, please read:
-  https://wiki.blender.org/wiki/Process/Contributing_Code

.gitignore

@@ -11,10 +11,6 @@ __pycache__/
 *.swo
 *#
 
-# Indexes for emacs, vi & others
-TAGS
-tags
-
 # QtCreator
 CMakeLists.txt.user
 
@@ -37,15 +33,3 @@ Desktop.ini
 /doc/python_api/sphinx-in/
 /doc/python_api/sphinx-out/
 /doc/python_api/rst/bmesh.ops.rst
-
-# in-source lib downloads
-/build_files/build_environment/downloads
-
-# in-source buildbot signing configuration
-/build_files/buildbot/codesign/config_server.py
-
-# smoke simulation noise tile (generated)
-waveletNoiseTile.bin
-
-# testing environment
-/Testing

.gitmodules

@@ -1,20 +1,20 @@
 [submodule "release/scripts/addons"]
 	path = release/scripts/addons
 	url = ../blender-addons.git
-	branch = master
 	ignore = all
+	branch = blender-v2.79-release
 [submodule "release/scripts/addons_contrib"]
 	path = release/scripts/addons_contrib
 	url = ../blender-addons-contrib.git
-	branch = master
 	ignore = all
+	branch = master
 [submodule "release/datafiles/locale"]
 	path = release/datafiles/locale
 	url = ../blender-translations.git
-	branch = master
 	ignore = all
+	branch = blender-v2.79-release
 [submodule "source/tools"]
 	path = source/tools
 	url = ../blender-dev-tools.git
-	branch = master
 	ignore = all
+	branch = blender-v2.79-release

GNUmakefile

@@ -1,210 +1,53 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
+# -*- mode: gnumakefile; tab-width: 4; indent-tabs-mode: t; -*-
+# vim: tabstop=4
+#
+# ##### BEGIN GPL LICENSE BLOCK #####
+#
+#  This program is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU General Public License
+#  as published by the Free Software Foundation; either version 2
+#  of the License, or (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software Foundation,
+#  Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# ##### END GPL LICENSE BLOCK #####
 
 # This Makefile does an out-of-source CMake build in ../build_`OS`_`CPU`
 # eg:
 #   ../build_linux_i386
 # This is for users who like to configure & build blender with a single command.
 
-define HELP_TEXT
-
-Blender Convenience Targets
-   Provided for building Blender (multiple targets can be used at once).
-
-   * debug:         Build a debug binary.
-   * full:          Enable all supported dependencies & options.
-   * lite:          Disable non essential features for a smaller binary and faster build.
-   * release:       Complete build with all options enabled including CUDA and Optix, matching the releases on blender.org
-   * headless:      Build without an interface (renderfarm or server automation).
-   * cycles:        Build Cycles standalone only, without Blender.
-   * bpy:           Build as a python module which can be loaded from python directly.
-   * developer:     Enable faster builds, error checking and tests, recommended for developers.
-   * ninja:         Use ninja build tool for faster builds.
-   * ccache:        Use ccache for faster rebuilds.
-
-   Note: when passing in multiple targets their order is not important.
-   So for a fast build you can for e.g. run 'make lite ccache ninja'.
-   Note: passing the argument 'BUILD_DIR=path' when calling make will override the default build dir.
-   Note: passing the argument 'BUILD_CMAKE_ARGS=args' lets you add cmake arguments.
-
-Other Convenience Targets
-   Provided for other building operations.
-
-   * config:        Run cmake configuration tool to set build options.
-   * deps:          Build library dependencies (intended only for platform maintainers).
-
-                    The existance of locally build dependencies overrides the pre-built dependencies from subversion.
-                    These must be manually removed from '../lib/' to go back to using the pre-compiled libraries.
-
-Project Files
-   Generate project files for development environments.
-
-   * project_qtcreator:     QtCreator Project Files.
-   * project_netbeans:      NetBeans Project Files.
-   * project_eclipse:       Eclipse CDT4 Project Files.
-
-Package Targets
-
-   * package_archive:   Build an archive package.
-
-Testing Targets
-   Not associated with building Blender.
-
-   * test:
-     Run automated tests with ctest.
-
-Static Source Code Checking
-   Not associated with building Blender.
-
-   * check_cppcheck:        Run blender source through cppcheck (C & C++).
-   * check_clang_array:     Run blender source through clang array checking script (C & C++).
-   * check_deprecated:      Check if there is any deprecated code to remove.
-   * check_splint:          Run blenders source through splint (C only).
-   * check_sparse:          Run blenders source through sparse (C only).
-   * check_smatch:          Run blenders source through smatch (C only).
-   * check_descriptions:    Check for duplicate/invalid descriptions.
-   * check_licenses:        Check license headers follow the SPDX license specification,
-                            using one of the accepted licenses in 'doc/license/SPDX-license-identifiers.txt'
-                            Append with 'SHOW_HEADERS=1' to show all unique headers
-                            which can be useful for spotting license irregularities.
-   * check_cmake:           Runs our own cmake file checker which detects errors in the cmake file list definitions.
-   * check_pep8:            Checks all Python script are pep8 which are tagged to use the stricter formatting.
-   * check_mypy:            Checks all Python scripts using mypy,
-                            see: source/tools/check_source/check_mypy_config.py scripts which are included.
-
-Spell Checkers
-   This runs the spell checker from the developer tools repositor.
-
-   * check_spelling_c:      Check for spelling errors (C/C++ only),
-   * check_spelling_osl:    Check for spelling errors (OSL only).
-   * check_spelling_py:     Check for spelling errors (Python only).
-
-   Note: an additional word-list is maintained at: 'source/tools/check_source/check_spelling_c_config.py'
-
-   Note: that spell checkers can take a 'CHECK_SPELLING_CACHE' filepath argument,
-   so re-running does not need to re-check unchanged files.
-
-   Example:
-      make check_spelling_c CHECK_SPELLING_CACHE=../spelling_cache.data
-
-Utilities
-   Not associated with building Blender.
-
-   * icons:
-     Updates PNG icons from SVG files.
-
-     Optionally pass in variables: 'BLENDER_BIN', 'INKSCAPE_BIN'
-     otherwise default paths are used.
-
-     Example
-        make icons INKSCAPE_BIN=/path/to/inkscape
-
-   * icons_geom:
-     Updates Geometry icons from BLEND file.
-
-     Optionally pass in variable: 'BLENDER_BIN'
-     otherwise default paths are used.
-
-     Example
-        make icons_geom BLENDER_BIN=/path/to/blender
-
-   * source_archive:
-     Create a compressed archive of the source code.
-
-   * source_archive_complete:
-     Create a compressed archive of the source code and all the libraries of dependencies.
-
-   * update:
-     Updates git and all submodules and svn.
-
-   * update_code:
-     Updates git and all submodules but not svn.
-
-   * format:
-     Format source code using clang (uses PATHS if passed in). For example::
-
-        make format PATHS="source/blender/blenlib source/blender/blenkernel"
-
-Environment Variables
-
-   * BUILD_CMAKE_ARGS:      Arguments passed to CMake.
-   * BUILD_DIR:             Override default build path.
-   * PYTHON:                Use this for the Python command (used for checking tools).
-   * NPROCS:                Number of processes to use building (auto-detect when omitted).
-
-Documentation Targets
-   Not associated with building Blender.
-
-   * doc_py:        Generate sphinx python api docs.
-   * doc_doxy:      Generate doxygen C/C++ docs.
-   * doc_dna:       Generate blender file format reference.
-   * doc_man:       Generate manpage.
-
-Information
-
-   * help:              This help message.
-   * help_features:     Show a list of optional features when building.
-
-endef
-# HELP_TEXT (end)
-
-# This makefile is not meant for Windows
-ifeq ($(OS),Windows_NT)
-	$(error On Windows, use "cmd //c make.bat" instead of "make")
-endif
 
 # System Vars
 OS:=$(shell uname -s)
 OS_NCASE:=$(shell uname -s | tr '[A-Z]' '[a-z]')
-CPU:=$(shell uname -m)
+# CPU:=$(shell uname -m)  # UNUSED
 
 
 # Source and Build DIR's
 BLENDER_DIR:=$(shell pwd -P)
 BUILD_TYPE:=Release
 
-# CMake arguments, assigned to local variable to make it mutable.
-CMAKE_CONFIG_ARGS := $(BUILD_CMAKE_ARGS)
+ifndef BUILD_CMAKE_ARGS
+	BUILD_CMAKE_ARGS:=
+endif
 
 ifndef BUILD_DIR
 	BUILD_DIR:=$(shell dirname "$(BLENDER_DIR)")/build_$(OS_NCASE)
 endif
 
-# Dependencies DIR's
-DEPS_SOURCE_DIR:=$(BLENDER_DIR)/build_files/build_environment
-
-ifndef DEPS_BUILD_DIR
-	DEPS_BUILD_DIR:=$(BUILD_DIR)/deps
-endif
-
-ifndef DEPS_INSTALL_DIR
-	DEPS_INSTALL_DIR:=$(shell dirname "$(BLENDER_DIR)")/lib/$(OS_NCASE)
-
-	# Add processor type to directory name, except for darwin x86_64
-	# which by convention does not have it.
-	ifeq ($(OS_NCASE),darwin)
-		ifneq ($(CPU),x86_64)
-			DEPS_INSTALL_DIR:=$(DEPS_INSTALL_DIR)_$(CPU)
-		endif
-	else
-		DEPS_INSTALL_DIR:=$(DEPS_INSTALL_DIR)_$(CPU)
-	endif
-endif
-
 # Allow to use alternative binary (pypy3, etc)
 ifndef PYTHON
 	PYTHON:=python3
 endif
 
-# For macOS python3 is not installed by default, so fallback to python binary
-# in libraries, or python 2 for running make update to get it.
-ifeq ($(OS_NCASE),darwin)
-	ifeq (, $(shell command -v $(PYTHON)))
-		PYTHON:=$(DEPS_INSTALL_DIR)/python/bin/python3.10
-		ifeq (, $(shell command -v $(PYTHON)))
-			PYTHON:=python
-		endif
-	endif
-endif
 
 # -----------------------------------------------------------------------------
 # additional targets for the build configuration
@@ -216,67 +59,23 @@ ifneq "$(findstring debug, $(MAKECMDGOALS))" ""
 endif
 ifneq "$(findstring full, $(MAKECMDGOALS))" ""
 	BUILD_DIR:=$(BUILD_DIR)_full
-	CMAKE_CONFIG_ARGS:=-C"$(BLENDER_DIR)/build_files/cmake/config/blender_full.cmake" $(CMAKE_CONFIG_ARGS)
+	BUILD_CMAKE_ARGS:=$(BUILD_CMAKE_ARGS) -C"$(BLENDER_DIR)/build_files/cmake/config/blender_full.cmake"
 endif
 ifneq "$(findstring lite, $(MAKECMDGOALS))" ""
 	BUILD_DIR:=$(BUILD_DIR)_lite
-	CMAKE_CONFIG_ARGS:=-C"$(BLENDER_DIR)/build_files/cmake/config/blender_lite.cmake" $(CMAKE_CONFIG_ARGS)
-endif
-ifneq "$(findstring release, $(MAKECMDGOALS))" ""
-	BUILD_DIR:=$(BUILD_DIR)_release
-	CMAKE_CONFIG_ARGS:=-C"$(BLENDER_DIR)/build_files/cmake/config/blender_release.cmake" $(CMAKE_CONFIG_ARGS)
+	BUILD_CMAKE_ARGS:=$(BUILD_CMAKE_ARGS) -C"$(BLENDER_DIR)/build_files/cmake/config/blender_lite.cmake"
 endif
 ifneq "$(findstring cycles, $(MAKECMDGOALS))" ""
 	BUILD_DIR:=$(BUILD_DIR)_cycles
-	CMAKE_CONFIG_ARGS:=-C"$(BLENDER_DIR)/build_files/cmake/config/cycles_standalone.cmake" $(CMAKE_CONFIG_ARGS)
+	BUILD_CMAKE_ARGS:=$(BUILD_CMAKE_ARGS) -C"$(BLENDER_DIR)/build_files/cmake/config/cycles_standalone.cmake"
 endif
 ifneq "$(findstring headless, $(MAKECMDGOALS))" ""
 	BUILD_DIR:=$(BUILD_DIR)_headless
-	CMAKE_CONFIG_ARGS:=-C"$(BLENDER_DIR)/build_files/cmake/config/blender_headless.cmake" $(CMAKE_CONFIG_ARGS)
+	BUILD_CMAKE_ARGS:=$(BUILD_CMAKE_ARGS) -C"$(BLENDER_DIR)/build_files/cmake/config/blender_headless.cmake"
 endif
 ifneq "$(findstring bpy, $(MAKECMDGOALS))" ""
 	BUILD_DIR:=$(BUILD_DIR)_bpy
-	CMAKE_CONFIG_ARGS:=-C"$(BLENDER_DIR)/build_files/cmake/config/bpy_module.cmake" $(CMAKE_CONFIG_ARGS)
-endif
-
-ifneq "$(findstring developer, $(MAKECMDGOALS))" ""
-	CMAKE_CONFIG_ARGS:=-C"$(BLENDER_DIR)/build_files/cmake/config/blender_developer.cmake" $(CMAKE_CONFIG_ARGS)
-endif
-
-ifneq "$(findstring ccache, $(MAKECMDGOALS))" ""
-	CMAKE_CONFIG_ARGS:=-DWITH_COMPILER_CCACHE=YES $(CMAKE_CONFIG_ARGS)
-endif
-
-# -----------------------------------------------------------------------------
-# build tool
-
-ifneq "$(findstring ninja, $(MAKECMDGOALS))" ""
-	CMAKE_CONFIG_ARGS:=$(CMAKE_CONFIG_ARGS) -G Ninja
-	BUILD_COMMAND:=ninja
-	DEPS_BUILD_COMMAND:=ninja
-else
-	ifneq ("$(wildcard $(BUILD_DIR)/build.ninja)","")
-		BUILD_COMMAND:=ninja
-	else
-		BUILD_COMMAND:=make -s
-	endif
-
-	ifneq ("$(wildcard $(DEPS_BUILD_DIR)/build.ninja)","")
-		DEPS_BUILD_COMMAND:=ninja
-	else
-		DEPS_BUILD_COMMAND:=make -s
-	endif
-endif
-
-# -----------------------------------------------------------------------------
-# Blender binary path
-
-# Allow passing in own BLENDER_BIN so developers who don't
-# use the default build path can still use utility helpers.
-ifeq ($(OS), Darwin)
-	BLENDER_BIN?="$(BUILD_DIR)/bin/Blender.app/Contents/MacOS/Blender"
-else
-	BLENDER_BIN?="$(BUILD_DIR)/bin/blender"
+	BUILD_CMAKE_ARGS:=$(BUILD_CMAKE_ARGS) -C"$(BLENDER_DIR)/build_files/cmake/config/bpy_module.cmake"
 endif
 
 
@@ -287,10 +86,13 @@ ifndef NPROCS
 	ifeq ($(OS), Linux)
 		NPROCS:=$(shell nproc)
 	endif
-	ifeq ($(OS), NetBSD)
-		NPROCS:=$(shell getconf NPROCESSORS_ONLN)
+	ifeq ($(OS), Darwin)
+		NPROCS:=$(shell sysctl -n hw.ncpu)
 	endif
-	ifneq (,$(filter $(OS),Darwin FreeBSD))
+	ifeq ($(OS), FreeBSD)
+		NPROCS:=$(shell sysctl -n hw.ncpu)
+	endif
+	ifeq ($(OS), NetBSD)
 		NPROCS:=$(shell sysctl -n hw.ncpu)
 	endif
 endif
@@ -299,7 +101,7 @@ endif
 # -----------------------------------------------------------------------------
 # Macro for configuring cmake
 
-CMAKE_CONFIG = cmake $(CMAKE_CONFIG_ARGS) \
+CMAKE_CONFIG = cmake $(BUILD_CMAKE_ARGS) \
                      -H"$(BLENDER_DIR)" \
                      -B"$(BUILD_DIR)" \
                      -DCMAKE_BUILD_TYPE_INIT:STRING=$(BUILD_TYPE)
@@ -308,7 +110,7 @@ CMAKE_CONFIG = cmake $(CMAKE_CONFIG_ARGS) \
 # -----------------------------------------------------------------------------
 # Tool for 'make config'
 
-# X11 specific.
+# X11 spesific
 ifdef DISPLAY
 	CMAKE_CONFIG_TOOL = cmake-gui
 else
@@ -331,44 +133,19 @@ all: .FORCE
 
 	@echo
 	@echo Building Blender ...
-	$(BUILD_COMMAND) -C "$(BUILD_DIR)" -j $(NPROCS) install
+	$(MAKE) -C "$(BUILD_DIR)" -s -j $(NPROCS) install
 	@echo
 	@echo edit build configuration with: "$(BUILD_DIR)/CMakeCache.txt" run make again to rebuild.
-	@echo Blender successfully built, run from: $(BLENDER_BIN)
+	@echo Blender successfully built, run from: "$(BUILD_DIR)/bin/blender"
 	@echo
 
 debug: all
 full: all
 lite: all
-release: all
 cycles: all
 headless: all
 bpy: all
-developer: all
-ninja: all
-ccache: all
 
-# -----------------------------------------------------------------------------
-# Build dependencies
-DEPS_TARGET = install
-ifneq "$(findstring clean, $(MAKECMDGOALS))" ""
-	DEPS_TARGET = clean
-endif
-
-deps: .FORCE
-	@echo
-	@echo Configuring dependencies in \"$(DEPS_BUILD_DIR)\"
-
-	@cmake -H"$(DEPS_SOURCE_DIR)" \
-	       -B"$(DEPS_BUILD_DIR)" \
-	       -DHARVEST_TARGET=$(DEPS_INSTALL_DIR)
-
-	@echo
-	@echo Building dependencies ...
-	$(DEPS_BUILD_COMMAND) -C "$(DEPS_BUILD_DIR)" -j $(NPROCS) $(DEPS_TARGET)
-	@echo
-	@echo Dependencies successfully built and installed to $(DEPS_INSTALL_DIR).
-	@echo
 
 # -----------------------------------------------------------------------------
 # Configuration (save some cd'ing around)
@@ -378,13 +155,90 @@ config: .FORCE
 
 # -----------------------------------------------------------------------------
 # Help for build targets
-export HELP_TEXT
 help: .FORCE
-	@echo "$$HELP_TEXT"
+	@echo ""
+	@echo "Convenience targets provided for building blender, (multiple at once can be used)"
+	@echo "  * debug     - build a debug binary"
+	@echo "  * full      - enable all supported dependencies & options"
+	@echo "  * lite      - disable non essential features for a smaller binary and faster build"
+	@echo "  * headless  - build without an interface (renderfarm or server automation)"
+	@echo "  * cycles    - build Cycles standalone only, without Blender"
+	@echo "  * bpy       - build as a python module which can be loaded from python directly"
+	@echo ""
+	@echo "  * config    - run cmake configuration tool to set build options"
+	@echo ""
+	@echo "  Note, passing the argument 'BUILD_DIR=path' when calling make will override the default build dir."
+	@echo "  Note, passing the argument 'BUILD_CMAKE_ARGS=args' lets you add cmake arguments."
+	@echo ""
+	@echo ""
+	@echo "Project Files for IDE's"
+	@echo "  * project_qtcreator - QtCreator Project Files"
+	@echo "  * project_netbeans  - NetBeans Project Files"
+	@echo "  * project_eclipse   - Eclipse CDT4 Project Files"
+	@echo ""
+	@echo "Package Targets"
+	@echo "  * package_debian  - build a debian package"
+	@echo "  * package_pacman  - build an arch linux pacman package"
+	@echo "  * package_archive - build an archive package"
+	@echo ""
+	@echo "Testing Targets (not associated with building blender)"
+	@echo "  * test               - run ctest, currently tests import/export,"
+	@echo "                         operator execution and that python modules load"
+	@echo "  * test_cmake         - runs our own cmake file checker"
+	@echo "                         which detects errors in the cmake file list definitions"
+	@echo "  * test_pep8          - checks all python script are pep8"
+	@echo "                         which are tagged to use the stricter formatting"
+	@echo "  * test_deprecated    - checks for deprecation tags in our code which may need to be removed"
+	@echo "  * test_style_c       - checks C/C++ conforms with blenders style guide:"
+	@echo "                         http://wiki.blender.org/index.php/Dev:Doc/CodeStyle"
+	@echo "  * test_style_c_qtc   - same as test_style but outputs QtCreator tasks format"
+	@echo "  * test_style_osl     - checks OpenShadingLanguage conforms with blenders style guide:"
+	@echo "                         http://wiki.blender.org/index.php/Dev:Doc/CodeStyle"
+	@echo "  * test_style_osl_qtc - checks OpenShadingLanguage conforms with blenders style guide:"
+	@echo "                         http://wiki.blender.org/index.php/Dev:Doc/CodeStyle"
+	@echo ""
+	@echo "Static Source Code Checking (not associated with building blender)"
+	@echo "  * check_cppcheck       - run blender source through cppcheck (C & C++)"
+	@echo "  * check_clang_array    - run blender source through clang array checking script (C & C++)"
+	@echo "  * check_splint         - run blenders source through splint (C only)"
+	@echo "  * check_sparse         - run blenders source through sparse (C only)"
+	@echo "  * check_smatch         - run blenders source through smatch (C only)"
+	@echo "  * check_spelling_c     - check for spelling errors (C/C++ only)"
+	@echo "  * check_spelling_c_qtc - same as check_spelling_c but outputs QtCreator tasks format"
+	@echo "  * check_spelling_osl   - check for spelling errors (OSL only)"
+	@echo "  * check_spelling_py    - check for spelling errors (Python only)"
+	@echo "  * check_descriptions   - check for duplicate/invalid descriptions"
+	@echo ""
+	@echo "Utilities (not associated with building blender)"
+	@echo "  * icons    - updates PNG icons from SVG files."
+	@echo "  * tgz      - create a compressed archive of the source code."
+	@echo "  * update   - updates git and all submodules"
+	@echo ""
+	@echo "Environment Variables"
+	@echo "  * BUILD_CMAKE_ARGS    - arguments passed to CMake."
+	@echo "  * BUILD_DIR           - override default build path."
+	@echo "  * PYTHON              - use this for the Python command (used for checking tools)."
+	@echo "  * NPROCS              - number of processes to use building (auto-detect when omitted)."
+	@echo ""
+	@echo "Documentation Targets (not associated with building blender)"
+	@echo "  * doc_py   - generate sphinx python api docs"
+	@echo "  * doc_doxy - generate doxygen C/C++ docs"
+	@echo "  * doc_dna  - generate blender file format reference"
+	@echo "  * doc_man  - generate manpage"
+	@echo ""
+	@echo "Information"
+	@echo "  * help          - this help message"
+	@echo "  * help_features - show a list of optional features when building"
+	@echo ""
 
 # -----------------------------------------------------------------------------
 # Packages
 #
+package_debian: .FORCE
+	cd build_files/package_spec ; DEB_BUILD_OPTIONS="parallel=$(NPROCS)" sh ./build_debian.sh
+
+package_pacman: .FORCE
+	cd build_files/package_spec/pacman ; MAKEFLAGS="-j$(NPROCS)" makepkg
 
 package_archive: .FORCE
 	make -C "$(BUILD_DIR)" -s package_archive
@@ -395,15 +249,68 @@ package_archive: .FORCE
 # Tests
 #
 test: .FORCE
-	@$(PYTHON) ./build_files/utils/make_test.py "$(BUILD_DIR)"
+	cd $(BUILD_DIR) ; ctest . --output-on-failure
 
+# run pep8 check check on scripts we distribute.
+test_pep8: .FORCE
+	$(PYTHON) tests/python/pep8.py > test_pep8.log 2>&1
+	@echo "written: test_pep8.log"
+
+# run some checks on our cmakefiles.
+test_cmake: .FORCE
+	$(PYTHON) build_files/cmake/cmake_consistency_check.py > test_cmake_consistency.log 2>&1
+	@echo "written: test_cmake_consistency.log"
+
+# run deprecation tests, see if we have anything to remove.
+test_deprecated: .FORCE
+	$(PYTHON) tests/check_deprecated.py
+
+test_style_c: .FORCE
+	# run our own checks on C/C++ style
+	PYTHONIOENCODING=utf_8 $(PYTHON) \
+	    "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" \
+	    "$(BLENDER_DIR)/source/blender" \
+	    "$(BLENDER_DIR)/source/creator" \
+	    --no-length-check
+
+test_style_c_qtc: .FORCE
+	# run our own checks on C/C++ style
+	USE_QTC_TASK=1 \
+	PYTHONIOENCODING=utf_8 $(PYTHON) \
+	    "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" \
+	    "$(BLENDER_DIR)/source/blender" \
+	    "$(BLENDER_DIR)/source/creator" \
+	    --no-length-check \
+	    > \
+	    "$(BLENDER_DIR)/test_style.tasks"
+	@echo "written: test_style.tasks"
+
+
+test_style_osl: .FORCE
+	# run our own checks on C/C++ style
+	PYTHONIOENCODING=utf_8 $(PYTHON) \
+	    "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" \
+	    "$(BLENDER_DIR)/intern/cycles/kernel/shaders" \
+	    "$(BLENDER_DIR)/release/scripts/templates_osl"
+
+
+test_style_osl_qtc: .FORCE
+	# run our own checks on C/C++ style
+	USE_QTC_TASK=1 \
+	PYTHONIOENCODING=utf_8 $(PYTHON) \
+	    "$(BLENDER_DIR)/source/tools/check_source/check_style_c.py" \
+	    "$(BLENDER_DIR)/intern/cycles/kernel/shaders" \
+	    "$(BLENDER_DIR)/release/scripts/templates_osl" \
+	    > \
+	    "$(BLENDER_DIR)/test_style.tasks"
+	@echo "written: test_style.tasks"
 
 # -----------------------------------------------------------------------------
 # Project Files
 #
 
 project_qtcreator: .FORCE
-	$(PYTHON) build_files/cmake/cmake_qtcreator_project.py --build-dir "$(BUILD_DIR)"
+	$(PYTHON) build_files/cmake/cmake_qtcreator_project.py "$(BUILD_DIR)"
 
 project_netbeans: .FORCE
 	$(PYTHON) build_files/cmake/cmake_netbeans_project.py "$(BUILD_DIR)"
@@ -417,118 +324,85 @@ project_eclipse: .FORCE
 #
 
 check_cppcheck: .FORCE
-	@$(CMAKE_CONFIG)
-	@cd "$(BUILD_DIR)" ; \
-	$(PYTHON) \
-	    "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_cppcheck.py" 2> \
+	$(CMAKE_CONFIG)
+	cd "$(BUILD_DIR)" ; \
+	$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_cppcheck.py" 2> \
 	    "$(BLENDER_DIR)/check_cppcheck.txt"
 	@echo "written: check_cppcheck.txt"
 
 check_clang_array: .FORCE
-	@$(CMAKE_CONFIG)
-	@cd "$(BUILD_DIR)" ; \
+	$(CMAKE_CONFIG)
+	cd "$(BUILD_DIR)" ; \
 	$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_clang_array.py"
 
 check_splint: .FORCE
-	@$(CMAKE_CONFIG)
-	@cd "$(BUILD_DIR)" ; \
+	$(CMAKE_CONFIG)
+	cd "$(BUILD_DIR)" ; \
 	$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_splint.py"
 
 check_sparse: .FORCE
-	@$(CMAKE_CONFIG)
-	@cd "$(BUILD_DIR)" ; \
+	$(CMAKE_CONFIG)
+	cd "$(BUILD_DIR)" ; \
 	$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_sparse.py"
 
 check_smatch: .FORCE
-	@$(CMAKE_CONFIG)
-	@cd "$(BUILD_DIR)" ; \
+	$(CMAKE_CONFIG)
+	cd "$(BUILD_DIR)" ; \
 	$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_static_check_smatch.py"
 
-check_mypy: .FORCE
-	@$(PYTHON) "$(BLENDER_DIR)/source/tools/check_source/check_mypy.py"
-
 check_spelling_py: .FORCE
-	@cd "$(BUILD_DIR)" ; \
+	cd "$(BUILD_DIR)" ; \
 	PYTHONIOENCODING=utf_8 $(PYTHON) \
 	    "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
 	    "$(BLENDER_DIR)/release/scripts"
 
 check_spelling_c: .FORCE
-	@cd "$(BUILD_DIR)" ; \
+	cd "$(BUILD_DIR)" ; \
 	PYTHONIOENCODING=utf_8 $(PYTHON) \
 	    "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
-	    --cache-file=$(CHECK_SPELLING_CACHE) \
 	    "$(BLENDER_DIR)/source" \
 	    "$(BLENDER_DIR)/intern/cycles" \
 	    "$(BLENDER_DIR)/intern/guardedalloc" \
 	    "$(BLENDER_DIR)/intern/ghost" \
 
-check_spelling_osl: .FORCE
-	@cd "$(BUILD_DIR)" ; \
+check_spelling_c_qtc: .FORCE
+	cd "$(BUILD_DIR)" ; USE_QTC_TASK=1 \
+	PYTHONIOENCODING=utf_8 $(PYTHON) \
+	    "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
+	    "$(BLENDER_DIR)/source" \
+	    "$(BLENDER_DIR)/intern/cycles" \
+	    "$(BLENDER_DIR)/intern/guardedalloc" \
+	    "$(BLENDER_DIR)/intern/ghost" \
+	    > \
+	    "$(BLENDER_DIR)/check_spelling_c.tasks"
+
+check_spelling_osl: .FORCE
+	cd "$(BUILD_DIR)" ;\
 	PYTHONIOENCODING=utf_8 $(PYTHON) \
 	    "$(BLENDER_DIR)/source/tools/check_source/check_spelling.py" \
-	    --cache-file=$(CHECK_SPELLING_CACHE) \
 	    "$(BLENDER_DIR)/intern/cycles/kernel/shaders"
 
 check_descriptions: .FORCE
-	@$(BLENDER_BIN) --background -noaudio --factory-startup --python \
+	"$(BUILD_DIR)/bin/blender" --background -noaudio --factory-startup --python \
 	    "$(BLENDER_DIR)/source/tools/check_source/check_descriptions.py"
 
-check_deprecated: .FORCE
-	@PYTHONIOENCODING=utf_8 $(PYTHON) \
-	    source/tools/check_source/check_deprecated.py
-
-check_licenses: .FORCE
-	@PYTHONIOENCODING=utf_8 $(PYTHON) \
-	    "$(BLENDER_DIR)/source/tools/check_source/check_licenses.py" \
-	    "--show-headers=$(SHOW_HEADERS)"
-
-check_pep8: .FORCE
-	@PYTHONIOENCODING=utf_8 $(PYTHON) \
-	    tests/python/pep8.py
-
-check_cmake: .FORCE
-	@PYTHONIOENCODING=utf_8 $(PYTHON) \
-	    source/tools/check_source/check_cmake_consistency.py
-
-
 # -----------------------------------------------------------------------------
 # Utilities
 #
 
-source_archive: .FORCE
-	@$(PYTHON) ./build_files/utils/make_source_archive.py
+tgz: .FORCE
+	./build_files/utils/build_tgz.sh
 
-source_archive_complete: .FORCE
-	@cmake \
-	    -S "$(BLENDER_DIR)/build_files/build_environment" -B"$(BUILD_DIR)/source_archive" \
-	    -DCMAKE_BUILD_TYPE_INIT:STRING=$(BUILD_TYPE) -DPACKAGE_USE_UPSTREAM_SOURCES=OFF
-# This assumes CMake is still using a default `PACKAGE_DIR` variable:
-	@$(PYTHON) ./build_files/utils/make_source_archive.py --include-packages "$(BUILD_DIR)/source_archive/packages"
-
-
-INKSCAPE_BIN?="inkscape"
 icons: .FORCE
-	@BLENDER_BIN=$(BLENDER_BIN) INKSCAPE_BIN=$(INKSCAPE_BIN) \
 	"$(BLENDER_DIR)/release/datafiles/blender_icons_update.py"
-	@INKSCAPE_BIN=$(INKSCAPE_BIN) \
 	"$(BLENDER_DIR)/release/datafiles/prvicons_update.py"
-	@INKSCAPE_BIN=$(INKSCAPE_BIN) \
-	    "$(BLENDER_DIR)/release/datafiles/alert_icons_update.py"
-
-icons_geom: .FORCE
-	@BLENDER_BIN=$(BLENDER_BIN) \
-	    "$(BLENDER_DIR)/release/datafiles/blender_icons_geom_update.py"
 
 update: .FORCE
-	@$(PYTHON) ./build_files/utils/make_update.py
-
-update_code: .FORCE
-	@$(PYTHON) ./build_files/utils/make_update.py --no-libraries
-
-format: .FORCE
-	@PATH="../lib/${OS_NCASE}_${CPU}/llvm/bin/:../lib/${OS_NCASE}_centos7_${CPU}/llvm/bin/:../lib/${OS_NCASE}/llvm/bin/:$(PATH)" \
-	    $(PYTHON) source/tools/utils_maintenance/clang_format_paths.py $(PATHS)
+	if [ -d "../lib" ]; then \
+		svn update ../lib/* ; \
+	fi
+	git pull --rebase
+	git submodule foreach git pull --rebase origin master
 
 
 # -----------------------------------------------------------------------------
@@ -537,31 +411,36 @@ format: .FORCE
 
 # Simple version of ./doc/python_api/sphinx_doc_gen.sh with no PDF generation.
 doc_py: .FORCE
-	@ASAN_OPTIONS=halt_on_error=0:${ASAN_OPTIONS} \
-	$(BLENDER_BIN) \
-	    --background -noaudio --factory-startup \
+	"$(BUILD_DIR)/bin/blender" --background -noaudio --factory-startup \
 		--python doc/python_api/sphinx_doc_gen.py
-	@sphinx-build -b html -j $(NPROCS) doc/python_api/sphinx-in doc/python_api/sphinx-out
-	@echo "docs written into: '$(BLENDER_DIR)/doc/python_api/sphinx-out/index.html'"
+	cd doc/python_api ; sphinx-build -b html sphinx-in sphinx-out
+	@echo "docs written into: '$(BLENDER_DIR)/doc/python_api/sphinx-out/contents.html'"
 
 doc_doxy: .FORCE
-	@cd doc/doxygen; doxygen Doxyfile
+	cd doc/doxygen; doxygen Doxyfile
 	@echo "docs written into: '$(BLENDER_DIR)/doc/doxygen/html/index.html'"
 
 doc_dna: .FORCE
-	@$(BLENDER_BIN) \
-	    --background -noaudio --factory-startup \
+	"$(BUILD_DIR)/bin/blender" --background -noaudio --factory-startup \
 		--python doc/blender_file_format/BlendFileDnaExporter_25.py
 	@echo "docs written into: '$(BLENDER_DIR)/doc/blender_file_format/dna.html'"
 
 doc_man: .FORCE
-	@$(PYTHON) doc/manpage/blender.1.py --blender="$(BLENDER_BIN)" --output=blender.1 --verbose
+	$(PYTHON) doc/manpage/blender.1.py "$(BUILD_DIR)/bin/blender"
 
 help_features: .FORCE
-	@$(PYTHON) "$(BLENDER_DIR)/build_files/cmake/cmake_print_build_options.py" $(BLENDER_DIR)"/CMakeLists.txt"
+	@$(PYTHON) -c \
+		"import re; \
+		print('\n'.join([ \
+		w for l in open('"$(BLENDER_DIR)"/CMakeLists.txt', 'r').readlines() \
+		if not l.lstrip().startswith('#') \
+		for w in (re.sub(\
+		    r'.*\boption\s*\(\s*(WITH_[a-zA-Z0-9_]+)\s+(\".*\")\s*.*', r'\g<1> - \g<2>', l).strip('() \n'),) \
+		if w.startswith('WITH_')]))" | uniq
+
 
 clean: .FORCE
-	$(BUILD_COMMAND) -C "$(BUILD_DIR)" clean
+	$(MAKE) -C "$(BUILD_DIR)" clean
 
 .PHONY: all
 

build_files/build_environment/CMakeLists.txt

@@ -1,160 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-####################################################################################################
-#
-# This is a build system used by platform maintainers to build library dependencies on
-# Windows, macOS and Linux.
-#
-# For users building Blender, we recommend using the precompiled libraries from lib/ on
-# Windows and macOS, and install_deps.sh on Linux.
-#
-# WINDOWS USAGE:
-#   Don't call this cmake file yourself, use build_deps.cmd
-#   build_deps 2013 x64 / build_deps 2013 x86
-#   build_deps 2015 x64 / build_deps 2015 x86
-#
-# MAC OS X USAGE:
-#   Install with homebrew: brew install autoconf automake bison cmake libtool pkg-config yasm
-#   Additional requirements for macOS arm64: brew install flex
-#   Run "make deps" from main Blender directory
-#
-# LINUX USAGE:
-#   Install compiler cmake autoconf automake libtool yasm tcl
-#   Run "make deps" from main Blender directory
-#
-####################################################################################################
-
-project("BlenderDependencies")
-cmake_minimum_required(VERSION 3.5)
-
-include(ExternalProject)
-include(cmake/check_software.cmake)
-include(cmake/options.cmake)
-include(cmake/versions.cmake)
-include(cmake/download.cmake)
-
-if(ENABLE_MINGW64)
-  include(cmake/setup_mingw64.cmake)
-else()
-  set(mingw_LIBDIR ${LIBDIR})
-endif()
-
-include(cmake/zlib.cmake)
-include(cmake/zstd.cmake)
-include(cmake/openal.cmake)
-include(cmake/png.cmake)
-include(cmake/jpeg.cmake)
-include(cmake/blosc.cmake)
-include(cmake/pthreads.cmake)
-include(cmake/openexr.cmake)
-include(cmake/brotli.cmake)
-include(cmake/freetype.cmake)
-include(cmake/freeglut.cmake)
-include(cmake/glew.cmake)
-include(cmake/alembic.cmake)
-include(cmake/glfw.cmake)
-include(cmake/clew.cmake)
-include(cmake/cuew.cmake)
-include(cmake/opensubdiv.cmake)
-include(cmake/sdl.cmake)
-include(cmake/opencollada.cmake)
-include(cmake/llvm.cmake)
-if(APPLE)
-  include(cmake/openmp.cmake)
-endif()
-if(UNIX)
-  include(cmake/nasm.cmake)
-endif()
-include(cmake/openimageio.cmake)
-include(cmake/tiff.cmake)
-if(WIN32)
-  include(cmake/flexbison.cmake)
-elseif(UNIX AND NOT APPLE)
-  include(cmake/flex.cmake)
-endif()
-include(cmake/osl.cmake)
-include(cmake/tbb.cmake)
-include(cmake/openvdb.cmake)
-include(cmake/nanovdb.cmake)
-include(cmake/python.cmake)
-option(USE_PIP_NUMPY "Install NumPy using pip wheel instead of building from source" OFF)
-if(APPLE AND ("${CMAKE_OSX_ARCHITECTURES}" STREQUAL "x86_64"))
-  set(USE_PIP_NUMPY ON)
-else()
-  include(cmake/numpy.cmake)
-endif()
-include(cmake/python_site_packages.cmake)
-include(cmake/package_python.cmake)
-include(cmake/usd.cmake)
-include(cmake/potrace.cmake)
-include(cmake/haru.cmake)
-# Boost needs to be included after python.cmake due to the PYTHON_BINARY variable being needed.
-include(cmake/boost.cmake)
-include(cmake/pugixml.cmake)
-include(cmake/ispc.cmake)
-include(cmake/openimagedenoise.cmake)
-include(cmake/embree.cmake)
-if(NOT APPLE)
-  include(cmake/xr_openxr.cmake)
-endif()
-
-# OpenColorIO and dependencies.
-include(cmake/expat.cmake)
-include(cmake/yamlcpp.cmake)
-include(cmake/opencolorio.cmake)
-
-if(BLENDER_PLATFORM_ARM)
-  include(cmake/sse2neon.cmake)
-endif()
-
-if(WITH_WEBP)
-  include(cmake/webp.cmake)
-endif()
-
-if(NOT WIN32 OR ENABLE_MINGW64)
-  include(cmake/gmp.cmake)
-  include(cmake/openjpeg.cmake)
-  if(NOT WIN32 OR BUILD_MODE STREQUAL Release)
-    if(WIN32)
-      include(cmake/zlib_mingw.cmake)
-    endif()
-    include(cmake/lame.cmake)
-    include(cmake/ogg.cmake)
-    include(cmake/vorbis.cmake)
-    include(cmake/theora.cmake)
-    include(cmake/opus.cmake)
-    include(cmake/vpx.cmake)
-    include(cmake/x264.cmake)
-    include(cmake/xvidcore.cmake)
-    include(cmake/ffmpeg.cmake)
-    include(cmake/fftw.cmake)
-    include(cmake/sndfile.cmake)
-    if(WIN32)
-      include(cmake/iconv.cmake)
-    endif()
-    if(UNIX)
-      include(cmake/flac.cmake)
-      include(cmake/xml2.cmake)
-      if(NOT APPLE)
-        include(cmake/spnav.cmake)
-        include(cmake/jemalloc.cmake)
-      endif()
-    endif()
-  endif()
-endif()
-
-if(UNIX)
-  include(cmake/bzip2.cmake)
-  include(cmake/ffi.cmake)
-  include(cmake/lzma.cmake)
-  include(cmake/ssl.cmake)
-  include(cmake/sqlite.cmake)
-endif()
-
-if(UNIX AND NOT APPLE)
-  include(cmake/libglu.cmake)
-  include(cmake/mesa.cmake)
-  include(cmake/wayland_protocols.cmake)
-endif()
-
-include(cmake/harvest.cmake)

build_files/build_environment/cmake/alembic.cmake

@@ -1,60 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(ALEMBIC_EXTRA_ARGS
-  -DBUILDSTATIC=ON
-  -DLINKSTATIC=ON
-  -DILMBASE_ROOT=${LIBDIR}/openexr
-  -DALEMBIC_ILMBASE_INCLUDE_DIRECTORY=${LIBDIR}/openexr/include/OpenEXR
-  -DALEMBIC_ILMBASE_HALF_LIB=${LIBDIR}/openexr/lib/${LIBPREFIX}Half${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DALEMBIC_ILMBASE_IMATH_LIB=${LIBDIR}/openexr/lib/${LIBPREFIX}Imath${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DALEMBIC_ILMBASE_ILMTHREAD_LIB=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmThread${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DALEMBIC_ILMBASE_IEX_LIB=${LIBDIR}/openexr/lib/${LIBPREFIX}Iex${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DALEMBIC_ILMBASE_IEXMATH_LIB=${LIBDIR}/openexr/lib/${LIBPREFIX}IexMath${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DUSE_PYILMBASE=0
-  -DUSE_PYALEMBIC=0
-  -DUSE_ARNOLD=0
-  -DUSE_MAYA=0
-  -DUSE_PRMAN=0
-  -DUSE_HDF5=Off
-  -DUSE_STATIC_HDF5=Off
-  -DUSE_TESTS=Off
-  -DALEMBIC_NO_OPENGL=1
-  -DUSE_BINARIES=ON
-  -DALEMBIC_ILMBASE_LINK_STATIC=On
-  -DALEMBIC_SHARED_LIBS=OFF
-  -DGLUT_INCLUDE_DIR=""
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-)
-
-ExternalProject_Add(external_alembic
-  URL file://${PACKAGE_DIR}/${ALEMBIC_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${ALEMBIC_HASH_TYPE}=${ALEMBIC_HASH}
-  PREFIX ${BUILD_DIR}/alembic
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/alembic -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${ALEMBIC_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/alembic
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_alembic after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/alembic ${HARVEST_TARGET}/alembic
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_alembic after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/alembic/lib/alembic.lib ${HARVEST_TARGET}/alembic/lib/alembic_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()
-
-
-
-add_dependencies(
-  external_alembic
-  external_zlib
-  external_openexr
-)

build_files/build_environment/cmake/blosc.cmake

@@ -1,57 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(BLOSC_EXTRA_ARGS
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DBUILD_TESTS=OFF
-  -DBUILD_BENCHMARKS=OFF
-  -DCMAKE_DEBUG_POSTFIX=_d
-  -DThreads_FOUND=1
-  -DPTHREAD_LIBS=${LIBDIR}/pthreads/lib/pthreadVC3.lib
-  -DPTHREAD_INCLUDE_DIR=${LIBDIR}/pthreads/inc
-  -DDEACTIVATE_SNAPPY=ON
-  -DCMAKE_POSITION_INDEPENDENT_CODE=ON
-)
-
-# Prevent blosc from including its own local copy of zlib in the object file
-# and cause linker errors with everybody else.
-set(BLOSC_EXTRA_ARGS ${BLOSC_EXTRA_ARGS}
-  -DPREFER_EXTERNAL_ZLIB=ON
-)
-
-ExternalProject_Add(external_blosc
-  URL file://${PACKAGE_DIR}/${BLOSC_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${BLOSC_HASH_TYPE}=${BLOSC_HASH}
-  PREFIX ${BUILD_DIR}/blosc
-  PATCH_COMMAND ${PATCH_CMD} --verbose -p 1 -N -d ${BUILD_DIR}/blosc/src/external_blosc < ${PATCH_DIR}/blosc.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/blosc ${DEFAULT_CMAKE_FLAGS} ${BLOSC_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/blosc
-)
-
-add_dependencies(
-  external_blosc
-  external_zlib
-)
-if(WIN32)
-  add_dependencies(
-    external_blosc
-    external_pthreads
-  )
-endif()
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_blosc after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/blosc/lib/libblosc.lib ${HARVEST_TARGET}/blosc/lib/libblosc.lib
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/blosc/include/ ${HARVEST_TARGET}/blosc/include/
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_blosc after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/blosc/lib/libblosc_d.lib ${HARVEST_TARGET}/blosc/lib/libblosc_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/boost.cmake

@@ -1,101 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(BOOST_ADDRESS_MODEL 64)
-
-if(BLENDER_PLATFORM_ARM)
-  set(BOOST_ARCHITECTURE arm)
-else()
-  set(BOOST_ARCHITECTURE x86)
-endif()
-
-if(WIN32)
-  if(MSVC_VERSION GREATER_EQUAL 1920) # 2019
-    set(BOOST_TOOLSET toolset=msvc-14.2)
-    set(BOOST_COMPILER_STRING -vc142)
-  else() # 2017
-    set(BOOST_TOOLSET toolset=msvc-14.1)
-    set(BOOST_COMPILER_STRING -vc141)
-  endif()
-
-  set(BOOST_CONFIGURE_COMMAND bootstrap.bat)
-  set(BOOST_BUILD_COMMAND b2)
-  set(BOOST_BUILD_OPTIONS runtime-link=shared )
-  set(BOOST_HARVEST_CMD   ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/boost/lib/ ${HARVEST_TARGET}/boost/lib/ )
-  if(BUILD_MODE STREQUAL Release)
-    set(BOOST_HARVEST_CMD ${BOOST_HARVEST_CMD} && ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/boost/include/boost-${BOOST_VERSION_NODOTS_SHORT}/ ${HARVEST_TARGET}/boost/include/)
-  endif()
-elseif(APPLE)
-  set(BOOST_CONFIGURE_COMMAND ./bootstrap.sh)
-  set(BOOST_BUILD_COMMAND ./b2)
-  set(BOOST_BUILD_OPTIONS toolset=clang-darwin cxxflags=${PLATFORM_CXXFLAGS} linkflags=${PLATFORM_LDFLAGS} visibility=global --disable-icu boost.locale.icu=off)
-  set(BOOST_HARVEST_CMD echo .)
-  set(BOOST_PATCH_COMMAND echo .)
-else()
-  set(BOOST_HARVEST_CMD echo .)
-  set(BOOST_CONFIGURE_COMMAND ./bootstrap.sh)
-  set(BOOST_BUILD_COMMAND ./b2)
-  set(BOOST_BUILD_OPTIONS cxxflags=${PLATFORM_CXXFLAGS} --disable-icu boost.locale.icu=off)
-  set(BOOST_PATCH_COMMAND echo .)
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    set(BOOST_ADDRESS_MODEL 64)
-  else()
-    set(BOOST_ADDRESS_MODEL 32)
-  endif()
-endif()
-
-if(WITH_BOOST_PYTHON)
-  set(JAM_FILE ${BUILD_DIR}/boost.user-config.jam)
-  configure_file(${PATCH_DIR}/boost.user.jam.in ${JAM_FILE})
-  set(BOOST_PYTHON_OPTIONS
-    --with-python
-    --user-config=${JAM_FILE}
-  )
-  if(WIN32 AND BUILD_MODE STREQUAL Debug)
-    set(BOOST_PYTHON_OPTIONS
-      ${BOOST_PYTHON_OPTIONS}
-      define=BOOST_DEBUG_PYTHON
-    )
-  endif()
-endif()
-
-set(BOOST_OPTIONS
-  --with-filesystem
-  --with-locale
-  --with-thread
-  --with-regex
-  --with-system
-  --with-date_time
-  --with-wave
-  --with-atomic
-  --with-serialization
-  --with-program_options
-  --with-iostreams
-  -sNO_BZIP2=1
-  -sNO_LZMA=1
-  -sNO_ZSTD=1
-  ${BOOST_TOOLSET}
-  ${BOOST_PYTHON_OPTIONS}
-)
-
-string(TOLOWER ${BUILD_MODE} BOOST_BUILD_TYPE)
-
-ExternalProject_Add(external_boost
-  URL file://${PACKAGE_DIR}/${BOOST_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${BOOST_HASH_TYPE}=${BOOST_HASH}
-  PREFIX ${BUILD_DIR}/boost
-  UPDATE_COMMAND  ""
-  PATCH_COMMAND ${BOOST_PATCH_COMMAND}
-  CONFIGURE_COMMAND ${BOOST_CONFIGURE_COMMAND}
-  BUILD_COMMAND ${BOOST_BUILD_COMMAND} ${BOOST_BUILD_OPTIONS} -j${MAKE_THREADS} architecture=${BOOST_ARCHITECTURE} address-model=${BOOST_ADDRESS_MODEL} link=static threading=multi ${BOOST_OPTIONS}    --prefix=${LIBDIR}/boost install
-  BUILD_IN_SOURCE 1
-  INSTALL_COMMAND "${BOOST_HARVEST_CMD}"
-)
-
-if(WITH_BOOST_PYTHON)
-  add_dependencies(
-    external_boost
-    external_python
-    external_numpy
-  )
-endif()

build_files/build_environment/cmake/brotli.cmake

@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(BROTLI_EXTRA_ARGS
-)
-
-ExternalProject_Add(external_brotli
-  URL file://${PACKAGE_DIR}/${BROTLI_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${BROTLI_HASH_TYPE}=${BROTLI_HASH}
-  PREFIX ${BUILD_DIR}/brotli
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/brotli ${DEFAULT_CMAKE_FLAGS} ${BROTLI_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/brotli
-)
-
-if(BUILD_MODE STREQUAL Release AND WIN32)
-  ExternalProject_Add_Step(external_brotli after_install
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/brotli/include ${HARVEST_TARGET}/brotli/include
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/brotli/lib/brotlidec-static${LIBEXT} ${HARVEST_TARGET}/brotli/lib/brotlidec-static${LIBEXT}
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/brotli/lib/brotlicommon-static${LIBEXT} ${HARVEST_TARGET}/brotli/lib/brotlicommon-static${LIBEXT}
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/bzip2.cmake

@@ -1,25 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(BZIP2_PREFIX "${LIBDIR}/bzip2")
-set(BZIP2_CONFIGURE_ENV echo .)
-set(BZIP2_CONFIGURATION_ARGS)
-
-if(UNIX AND NOT APPLE)
-  set(BZIP2_LDFLAGS "-Wl,--as-needed")
-  set(BZIP2_CFLAGS "-fPIC -Wall -Winline -O2 -g -D_FILE_OFFSET_BITS=64")
-  set(BZIP2_CONFIGURE_ENV ${BZIP2_CONFIGURE_ENV} && export LDFLAGS=${BZIP2_LDFLAGS} && export CFLAGS=${BZIP2_CFLAGS}
-    && export PREFIX=${BZIP2_PREFIX})
-else()
-  set(BZIP2_CONFIGURE_ENV ${CONFIGURE_ENV})
-endif()
-
-ExternalProject_Add(external_bzip2
-  URL file://${PACKAGE_DIR}/${BZIP2_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${BZIP2_HASH_TYPE}=${BZIP2_HASH}
-  PREFIX ${BUILD_DIR}/bzip2
-  CONFIGURE_COMMAND echo .
-  BUILD_COMMAND ${BZIP2_CONFIGURE_ENV} && cd ${BUILD_DIR}/bzip2/src/external_bzip2/ && make CFLAGS=${BZIP2_CFLAGS} LDFLAGS=${BZIP2_LDFLAGS} -j${MAKE_THREADS}
-  INSTALL_COMMAND ${BZIP2_CONFIGURE_ENV} && cd ${BUILD_DIR}/bzip2/src/external_bzip2/ && make CFLAGS=${BZIP2_CFLAGS} LDFLAGS=${BZIP2_LDFLAGS} PREFIX=${BZIP2_PREFIX} install
-  INSTALL_DIR ${LIBDIR}/bzip2
-)

build_files/build_environment/cmake/check_software.cmake

@@ -1,69 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(UNIX)
-  if(APPLE)
-    set(_libtoolize_name glibtoolize)
-  else()
-    set(_libtoolize_name libtoolize)
-  endif()
-
-  set(_required_software
-    autoconf
-    automake
-    bison
-    ${_libtoolize_name}
-    pkg-config
-    tclsh
-    yasm
-  )
-
-  if(NOT APPLE)
-    set(_required_software
-      ${_required_software}
-
-      # Needed for Mesa.
-      meson
-      ninja
-    )
-  endif()
-
-  foreach(_software ${_required_software})
-    find_program(_software_find NAMES ${_software})
-    if(NOT _software_find)
-      set(_software_missing "${_software_missing}${_software} ")
-    endif()
-    unset(_software_find CACHE)
-  endforeach()
-
-  if(APPLE)
-    # Homebrew has different default locations for ARM and Intel macOS.
-    if("${CMAKE_HOST_SYSTEM_PROCESSOR}" STREQUAL "arm64")
-      set(HOMEBREW_LOCATION "/opt/homebrew")
-    else()
-      set(HOMEBREW_LOCATION "/usr/local")
-    endif()
-    if(NOT EXISTS "${HOMEBREW_LOCATION}/opt/bison/bin/bison")
-      string(APPEND _software_missing " bison")
-    endif()
-  endif()
-
-  if(_software_missing)
-    message(
-      "\n"
-      "Missing software for building Blender dependencies:\n"
-      "  ${_software_missing}\n"
-      "\n"
-      "On Debian and Ubuntu:\n"
-      "  apt install autoconf automake libtool yasm tcl ninja-build meson python3-mako\n"
-      "\n"
-      "On macOS Intel (with homebrew):\n"
-      "  brew install autoconf automake bison libtool pkg-config yasm\n"
-      "\n"
-      "On macOS ARM (with homebrew):\n"
-      "  brew install autoconf automake bison flex libtool pkg-config yasm\n"
-      "\n"
-      "Other platforms:\n"
-      "  Install equivalent packages.\n")
-    message(FATAL_ERROR "Install missing software before continuing")
-  endif()
-endif()

build_files/build_environment/cmake/clew.cmake

@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(CLEW_EXTRA_ARGS)
-
-ExternalProject_Add(external_clew
-  URL file://${PACKAGE_DIR}/${CLEW_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${CLEW_HASH_TYPE}=${CLEW_HASH}
-  PREFIX ${BUILD_DIR}/clew
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/clew -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${CLEW_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/clew
-)

build_files/build_environment/cmake/cuew.cmake

@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(CUEW_EXTRA_ARGS)
-
-ExternalProject_Add(external_cuew
-  URL file://${PACKAGE_DIR}/${CUEW_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${CUEW_HASH_TYPE}=${CUEW_HASH}
-  PREFIX ${BUILD_DIR}/cuew
-  PATCH_COMMAND ${PATCH_CMD} --verbose -p 0 -N -d ${BUILD_DIR}/cuew/src/external_cuew < ${PATCH_DIR}/cuew.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/cuew -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${CUEW_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/cuew
-)

build_files/build_environment/cmake/download.cmake

@@ -1,99 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-function(download_source dep)
-  set(TARGET_FILE ${${dep}_FILE})
-  set(TARGET_HASH_TYPE ${${dep}_HASH_TYPE})
-  set(TARGET_HASH ${${dep}_HASH})
-  if(PACKAGE_USE_UPSTREAM_SOURCES)
-    set(TARGET_URI  ${${dep}_URI})
-  else()
-    set(TARGET_URI  https://svn.blender.org/svnroot/bf-blender/trunk/lib/packages/${TARGET_FILE})
-  endif()
-  set(TARGET_FILE ${PACKAGE_DIR}/${TARGET_FILE})
-  message("Checking source : ${dep} (${TARGET_FILE})")
-  if(NOT EXISTS ${TARGET_FILE})
-    message("Checking source : ${dep} - source not found downloading from ${TARGET_URI}")
-    file(DOWNLOAD ${TARGET_URI} ${TARGET_FILE}
-         TIMEOUT 1800  # seconds
-         EXPECTED_HASH ${TARGET_HASH_TYPE}=${TARGET_HASH}
-         TLS_VERIFY ON
-         SHOW_PROGRESS
-        )
-  endif()
-endfunction(download_source)
-
-download_source(ZLIB)
-download_source(OPENAL)
-download_source(PNG)
-download_source(JPEG)
-download_source(BOOST)
-download_source(BLOSC)
-download_source(PTHREADS)
-download_source(OPENEXR)
-download_source(FREETYPE)
-download_source(GLEW)
-download_source(FREEGLUT)
-download_source(ALEMBIC)
-download_source(GLFW)
-download_source(CLEW)
-download_source(GLFW)
-download_source(CUEW)
-download_source(OPENSUBDIV)
-download_source(SDL)
-download_source(OPENCOLLADA)
-download_source(OPENCOLORIO)
-download_source(LLVM)
-download_source(OPENMP)
-download_source(OPENIMAGEIO)
-download_source(TIFF)
-download_source(OSL)
-download_source(PYTHON)
-download_source(TBB)
-download_source(OPENVDB)
-download_source(NANOVDB)
-download_source(NUMPY)
-download_source(LAME)
-download_source(OGG)
-download_source(VORBIS)
-download_source(THEORA)
-download_source(FLAC)
-download_source(VPX)
-download_source(OPUS)
-download_source(X264)
-download_source(XVIDCORE)
-download_source(OPENJPEG)
-download_source(FFMPEG)
-download_source(FFTW)
-download_source(ICONV)
-download_source(SNDFILE)
-if(WITH_WEBP)
-  download_source(WEBP)
-endif()
-download_source(SPNAV)
-download_source(JEMALLOC)
-download_source(XML2)
-download_source(TINYXML)
-download_source(YAMLCPP)
-download_source(EXPAT)
-download_source(PUGIXML)
-download_source(FLEXBISON)
-download_source(BZIP2)
-download_source(FFI)
-download_source(LZMA)
-download_source(SSL)
-download_source(SQLITE)
-download_source(EMBREE)
-download_source(USD)
-download_source(OIDN)
-download_source(LIBGLU)
-download_source(MESA)
-download_source(NASM)
-download_source(XR_OPENXR_SDK)
-download_source(WL_PROTOCOLS)
-download_source(ISPC)
-download_source(GMP)
-download_source(POTRACE)
-download_source(HARU)
-download_source(ZSTD)
-download_source(FLEX)
-download_source(BROTLI)

build_files/build_environment/cmake/embree.cmake

@@ -1,88 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-# Note the utility apps may use png/tiff/gif system libraries, but the
-# library itself does not depend on them, so should give no problems.
-
-set(EMBREE_EXTRA_ARGS
-  -DEMBREE_ISPC_SUPPORT=OFF
-  -DEMBREE_TUTORIALS=OFF
-  -DEMBREE_STATIC_LIB=ON
-  -DEMBREE_RAY_MASK=ON
-  -DEMBREE_FILTER_FUNCTION=ON
-  -DEMBREE_BACKFACE_CULLING=OFF
-  -DEMBREE_MAX_ISA=AVX2
-  -DEMBREE_TASKING_SYSTEM=TBB
-  -DEMBREE_TBB_ROOT=${LIBDIR}/tbb
-  -DTBB_ROOT=${LIBDIR}/tbb
-  -DTBB_STATIC_LIB=${TBB_STATIC_LIBRARY}
-)
-
-if(TBB_STATIC_LIBRARY)
-  set(EMBREE_EXTRA_ARGS
-    ${EMBREE_EXTRA_ARGS}
-    -DEMBREE_TBB_LIBRARY_NAME=tbb_static
-    -DEMBREE_TBBMALLOC_LIBRARY_NAME=tbbmalloc_static
-  )
-endif()
-
-if(WIN32)
-  set(EMBREE_BUILD_DIR ${BUILD_MODE}/)
-  if(BUILD_MODE STREQUAL Debug)
-    list(APPEND EMBREE_EXTRA_ARGS
-     -DEMBREE_TBBMALLOC_LIBRARY_NAME=tbbmalloc_debug
-     -DEMBREE_TBB_LIBRARY_NAME=tbb_debug
-    )
-  endif()
-else()
-  set(EMBREE_BUILD_DIR)
-endif()
-
-if(BLENDER_PLATFORM_ARM)
-  ExternalProject_Add(external_embree
-    GIT_REPOSITORY ${EMBREE_ARM_GIT}
-    GIT_TAG "blender-arm"
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    PREFIX ${BUILD_DIR}/embree
-    CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/embree ${DEFAULT_CMAKE_FLAGS} ${EMBREE_EXTRA_ARGS}
-    INSTALL_DIR ${LIBDIR}/embree
-  )
-else()
-  ExternalProject_Add(external_embree
-    URL file://${PACKAGE_DIR}/${EMBREE_FILE}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH ${EMBREE_HASH_TYPE}=${EMBREE_HASH}
-    PREFIX ${BUILD_DIR}/embree
-    PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/embree/src/external_embree < ${PATCH_DIR}/embree.diff
-    CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/embree ${DEFAULT_CMAKE_FLAGS} ${EMBREE_EXTRA_ARGS}
-    INSTALL_DIR ${LIBDIR}/embree
-  )
-endif()
-
-add_dependencies(
-  external_embree
-  external_tbb
-)
-
-if(WIN32)
-
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_embree after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/embree ${HARVEST_TARGET}/embree
-      DEPENDEES install
-    )
-  else()
-  ExternalProject_Add_Step(external_embree after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/embree3.lib ${HARVEST_TARGET}/embree/lib/embree3_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/embree_avx.lib ${HARVEST_TARGET}/embree/lib/embree_avx_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/embree_avx2.lib ${HARVEST_TARGET}/embree/lib/embree_avx2_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/embree_sse42.lib ${HARVEST_TARGET}/embree/lib/embree_sse42_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/lexers.lib ${HARVEST_TARGET}/embree/lib/lexers_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/math.lib ${HARVEST_TARGET}/embree/lib/math_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/simd.lib ${HARVEST_TARGET}/embree/lib/simd_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/sys.lib ${HARVEST_TARGET}/embree/lib/sys_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/embree/lib/tasking.lib ${HARVEST_TARGET}/embree/lib/tasking_d.lib
-      DEPENDEES install
-    )
-  endif()
-
-endif()

build_files/build_environment/cmake/expat.cmake

@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(EXPAT_EXTRA_ARGS
-  -DEXPAT_BUILD_DOCS=OFF
-  -DEXPAT_BUILD_EXAMPLES=OFF
-  -DEXPAT_BUILD_TESTS=OFF
-  -DEXPAT_BUILD_TOOLS=OFF
-  -DEXPAT_SHARED_LIBS=OFF
-)
-
-ExternalProject_Add(external_expat
-  URL file://${PACKAGE_DIR}/${EXPAT_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${EXPAT_HASH_TYPE}=${EXPAT_HASH}
-  PREFIX ${BUILD_DIR}/expat
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/expat ${DEFAULT_CMAKE_FLAGS} ${EXPAT_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/expat
-  SOURCE_SUBDIR expat
-)

build_files/build_environment/cmake/ffi.cmake

@@ -1,24 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_ffi
-  URL file://${PACKAGE_DIR}/${FFI_FILE}
-  URL_HASH ${FFI_HASH_TYPE}=${FFI_HASH}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  PREFIX ${BUILD_DIR}/ffi
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ffi/src/external_ffi/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/ffi
-    --enable-shared=no
-    --enable-static=yes
-    --with-pic
-    --libdir=${LIBDIR}/ffi/lib/
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ffi/src/external_ffi/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ffi/src/external_ffi/ && make install
-  PATCH_COMMAND ${PATCH_CMD} -p 0 -d ${BUILD_DIR}/ffi/src/external_ffi < ${PATCH_DIR}/ffi.diff
-  INSTALL_DIR ${LIBDIR}/ffi
-)
-
-if(UNIX AND NOT APPLE)
-  ExternalProject_Add_Step(external_ffi after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/ffi/lib/libffi.a ${LIBDIR}/ffi/lib/libffi_pic.a
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/ffmpeg.cmake

@@ -1,148 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(FFMPEG_CFLAGS "-I${mingw_LIBDIR}/lame/include -I${mingw_LIBDIR}/openjpeg/include/ -I${mingw_LIBDIR}/ogg/include -I${mingw_LIBDIR}/vorbis/include -I${mingw_LIBDIR}/theora/include -I${mingw_LIBDIR}/opus/include -I${mingw_LIBDIR}/vpx/include -I${mingw_LIBDIR}/x264/include -I${mingw_LIBDIR}/xvidcore/include -I${mingw_LIBDIR}/zlib/include")
-set(FFMPEG_LDFLAGS "-L${mingw_LIBDIR}/lame/lib -L${mingw_LIBDIR}/openjpeg/lib -L${mingw_LIBDIR}/ogg/lib -L${mingw_LIBDIR}/vorbis/lib -L${mingw_LIBDIR}/theora/lib -L${mingw_LIBDIR}/opus/lib -L${mingw_LIBDIR}/vpx/lib -L${mingw_LIBDIR}/x264/lib -L${mingw_LIBDIR}/xvidcore/lib -L${mingw_LIBDIR}/zlib/lib")
-set(FFMPEG_EXTRA_FLAGS --pkg-config-flags=--static --extra-cflags=${FFMPEG_CFLAGS} --extra-ldflags=${FFMPEG_LDFLAGS})
-set(FFMPEG_ENV PKG_CONFIG_PATH=${mingw_LIBDIR}/openjpeg/lib/pkgconfig:${mingw_LIBDIR}/x264/lib/pkgconfig:${mingw_LIBDIR}/vorbis/lib/pkgconfig:${mingw_LIBDIR}/ogg/lib/pkgconfig:${mingw_LIBDIR}:${mingw_LIBDIR}/vpx/lib/pkgconfig:${mingw_LIBDIR}/theora/lib/pkgconfig:${mingw_LIBDIR}/openjpeg/lib/pkgconfig:${mingw_LIBDIR}/opus/lib/pkgconfig:)
-
-if(WIN32)
-  set(FFMPEG_ENV set ${FFMPEG_ENV} &&)
-  set(FFMPEG_EXTRA_FLAGS
-    ${FFMPEG_EXTRA_FLAGS}
-    --disable-static
-    --enable-shared
-    --enable-w32threads
-    --disable-pthreads
-    --enable-libopenjpeg
-    --disable-mediafoundation
-  )
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "4")
-    set(FFMPEG_EXTRA_FLAGS
-      ${FFMPEG_EXTRA_FLAGS}
-      --x86asmexe=yasm
-    )
-  endif()
-else()
-  set(FFMPEG_EXTRA_FLAGS
-    ${FFMPEG_EXTRA_FLAGS}
-    --enable-static
-    --disable-shared
-    --enable-libopenjpeg
-  )
-endif()
-
-if(APPLE)
-  set(FFMPEG_EXTRA_FLAGS
-    ${FFMPEG_EXTRA_FLAGS}
-    --target-os=darwin
-    --x86asmexe=${LIBDIR}/nasm/bin/nasm
-  )
-elseif(UNIX)
-  set(FFMPEG_EXTRA_FLAGS
-    ${FFMPEG_EXTRA_FLAGS}
-    --x86asmexe=${LIBDIR}/nasm/bin/nasm
-  )
-endif()
-
-ExternalProject_Add(external_ffmpeg
-  URL file://${PACKAGE_DIR}/${FFMPEG_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${FFMPEG_HASH_TYPE}=${FFMPEG_HASH}
-  # OpenJpeg is compiled with pthread support on Linux, which is all fine and is what we
-  # want for maximum runtime performance, but due to static nature of that library we
-  # need to force ffmpeg to link against pthread, otherwise test program used by autoconf
-  # will fail. This patch does that in a way that is compatible with multiple distributions.
-  PATCH_COMMAND ${PATCH_CMD} --verbose -p 1 -N -d ${BUILD_DIR}/ffmpeg/src/external_ffmpeg < ${PATCH_DIR}/ffmpeg.diff
-  PREFIX ${BUILD_DIR}/ffmpeg
-  CONFIGURE_COMMAND ${CONFIGURE_ENV_NO_PERL} &&
-    cd ${BUILD_DIR}/ffmpeg/src/external_ffmpeg/ &&
-    ${FFMPEG_ENV} ${CONFIGURE_COMMAND_NO_TARGET} ${FFMPEG_EXTRA_FLAGS}
-    --disable-lzma
-    --disable-avfilter
-    --disable-vdpau
-    --disable-bzlib
-    --disable-libgsm
-    --disable-libspeex
-    --enable-libvpx
-    --enable-libopus
-    --prefix=${LIBDIR}/ffmpeg
-    --enable-libtheora
-    --enable-libvorbis
-    --enable-zlib
-    --enable-stripping
-    --enable-runtime-cpudetect
-    --disable-vaapi
-    --disable-nonfree
-    --enable-gpl
-    --disable-postproc
-    --enable-libmp3lame
-    --disable-librtmp
-    --enable-libx264
-    --enable-libxvid
-    --disable-libopencore-amrnb
-    --disable-libopencore-amrwb
-    --disable-libdc1394
-    --disable-version3
-    --disable-debug
-    --enable-optimizations
-    --enable-ffplay
-    --disable-openssl
-    --disable-securetransport
-    --disable-indev=avfoundation
-    --disable-indev=qtkit
-    --disable-sdl2
-    --disable-gnutls
-    --disable-videotoolbox
-    --disable-libxcb
-    --disable-xlib
-    --disable-audiotoolbox
-    --disable-cuvid
-    --disable-nvenc
-    --disable-indev=jack
-    --disable-indev=alsa
-    --disable-outdev=alsa
-    --disable-crystalhd
-    --disable-sndio
-  BUILD_COMMAND ${CONFIGURE_ENV_NO_PERL} && cd ${BUILD_DIR}/ffmpeg/src/external_ffmpeg/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV_NO_PERL} && cd ${BUILD_DIR}/ffmpeg/src/external_ffmpeg/ && make install
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/ffmpeg ${DEFAULT_CMAKE_FLAGS}
-  INSTALL_DIR ${LIBDIR}/ffmpeg
-)
-
-if(MSVC)
-  set_target_properties(external_ffmpeg PROPERTIES FOLDER Mingw)
-endif()
-
-add_dependencies(
-  external_ffmpeg
-  external_zlib
-  external_openjpeg
-  external_xvidcore
-  external_x264
-  external_opus
-  external_vpx
-  external_theora
-  external_vorbis
-  external_ogg
-  external_lame
-)
-if(WIN32)
-  add_dependencies(
-    external_ffmpeg
-    external_zlib_mingw
-  )
-endif()
-if(UNIX)
-  add_dependencies(
-    external_ffmpeg
-    external_nasm
-  )
-endif()
-
-if(BUILD_MODE STREQUAL Release AND WIN32)
-  ExternalProject_Add_Step(external_ffmpeg after_install
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/ffmpeg/include ${HARVEST_TARGET}/ffmpeg/include
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/ffmpeg/bin ${HARVEST_TARGET}/ffmpeg/lib
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/fftw.cmake

@@ -1,36 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(FFTW_EXTRA_ARGS)
-
-if(WIN32)
-  set(FFTW3_PATCH_COMMAND ${PATCH_CMD} --verbose -p 0 -N -d ${BUILD_DIR}/fftw3/src/external_fftw3 < ${PATCH_DIR}/fftw3.diff)
-  set(FFTW_EXTRA_ARGS --disable-static --enable-shared)
-  set(FFTW_INSTALL install-strip)
-else()
-  set(FFTW_EXTRA_ARGS --enable-static)
-  set(FFTW_INSTALL install)
-endif()
-
-ExternalProject_Add(external_fftw3
-  URL file://${PACKAGE_DIR}/${FFTW_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${FFTW_HASH_TYPE}=${FFTW_HASH}
-  PREFIX ${BUILD_DIR}/fftw3
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/fftw3/src/external_fftw3/ && ${CONFIGURE_COMMAND} ${FFTW_EXTRA_ARGS} --prefix=${mingw_LIBDIR}/fftw3
-  PATCH_COMMAND ${FFTW3_PATCH_COMMAND}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/fftw3/src/external_fftw3/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/fftw3/src/external_fftw3/ && make ${FFTW_INSTALL}
-  INSTALL_DIR ${LIBDIR}/fftw3
-)
-
-if(MSVC)
-  set_target_properties(external_fftw3 PROPERTIES FOLDER Mingw)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_fftw3 after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/fftw3/lib/libfftw3.dll.a ${HARVEST_TARGET}/fftw3/lib/libfftw.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/fftw3/bin/libfftw3-3.dll ${HARVEST_TARGET}/fftw3/lib/libfftw3-3.dll
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/fftw3/include/fftw3.h ${HARVEST_TARGET}/fftw3/include/fftw3.h
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/flac.cmake

@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_flac
-  URL file://${PACKAGE_DIR}/${FLAC_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${FLAC_HASH_TYPE}=${FLAC_HASH}
-  PREFIX ${BUILD_DIR}/flac
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/flac/src/external_flac/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/flac --disable-shared --enable-static
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/flac/src/external_flac/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/flac/src/external_flac/ && make install
-  INSTALL_DIR ${LIBDIR}/flac
-)
-
-if(MSVC)
-  set_target_properties(external_flac PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/flex.cmake

@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_flex
-  URL file://${PACKAGE_DIR}/${FLEX_FILE}
-  URL_HASH ${FLEX_HASH_TYPE}=${FLEX_HASH}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  PREFIX ${BUILD_DIR}/flex
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/flex/src/external_flex/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/flex
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/flex/src/external_flex/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/flex/src/external_flex/ && make install
-  INSTALL_DIR ${LIBDIR}/flex
-)

build_files/build_environment/cmake/flexbison.cmake

@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(FLEXBISON_EXTRA_ARGS)
-
-ExternalProject_Add(external_flexbison
-  URL file://${PACKAGE_DIR}/${FLEXBISON_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${FLEXBISON_HASH_TYPE}=${FLEXBISON_HASH}
-  PREFIX ${BUILD_DIR}/flexbison
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/flexbison ${DEFAULT_CMAKE_FLAGS} ${FLEXBISON_EXTRA_ARGS}
-  CONFIGURE_COMMAND echo .
-  BUILD_COMMAND echo .
-  INSTALL_COMMAND COMMAND ${CMAKE_COMMAND} -E copy_directory ${BUILD_DIR}/flexbison/src/external_flexbison/ ${LIBDIR}/flexbison/
-  INSTALL_DIR ${LIBDIR}/flexbison
-)

build_files/build_environment/cmake/freeglut.cmake

@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    set(FREEGLUT_EXTRA_ARGS
-      -DFREEGLUT_BUILD_SHARED_LIBS=Off
-      -DFREEGLUT_BUILD_STATIC_LIBS=On
-    )
-
-    ExternalProject_Add(external_freeglut
-      URL file://${PACKAGE_DIR}/${FREEGLUT_FILE}
-      DOWNLOAD_DIR ${DOWNLOAD_DIR}
-      URL_HASH ${FREEGLUT_HASH_TYPE}=${FREEGLUT_HASH}
-      PREFIX ${BUILD_DIR}/freeglut
-      CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/freeglut ${DEFAULT_C_FLAGS} ${DEFAULT_CXX_FLAGS} ${FREEGLUT_EXTRA_ARGS}
-      INSTALL_DIR ${LIBDIR}/freeglut
-    )
-  endif()
-endif()

build_files/build_environment/cmake/freetype.cmake

@@ -1,33 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(FREETYPE_EXTRA_ARGS
-  -DCMAKE_RELEASE_POSTFIX:STRING=2ST
-  -DCMAKE_DEBUG_POSTFIX:STRING=2ST_d
-  -DFT_DISABLE_BZIP2=ON
-  -DFT_DISABLE_HARFBUZZ=ON
-  -DFT_DISABLE_PNG=ON
-  -DFT_REQUIRE_BROTLI=ON
-  -DPC_BROTLIDEC_INCLUDEDIR=${LIBDIR}/brotli/include
-  -DPC_BROTLIDEC_LIBDIR=${LIBDIR}/brotli/lib
-  )
-
-ExternalProject_Add(external_freetype
-  URL file://${PACKAGE_DIR}/${FREETYPE_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${FREETYPE_HASH_TYPE}=${FREETYPE_HASH}
-  PREFIX ${BUILD_DIR}/freetype
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/freetype ${DEFAULT_CMAKE_FLAGS} ${FREETYPE_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/freetype
-)
-
-add_dependencies(
-  external_freetype
-  external_brotli
-)
-
-if(BUILD_MODE STREQUAL Release AND WIN32)
-  ExternalProject_Add_Step(external_freetype after_install
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/freetype ${HARVEST_TARGET}/freetype
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/glew.cmake

@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(GLEW_EXTRA_ARGS
-  -DBUILD_UTILS=Off
-  -DBUILD_SHARED_LIBS=Off
-)
-
-ExternalProject_Add(external_glew
-  URL file://${PACKAGE_DIR}/${GLEW_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${GLEW_HASH_TYPE}=${GLEW_HASH}
-  PATCH_COMMAND COMMAND ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/cmakelists_glew.txt ${BUILD_DIR}/glew/src/external_glew/CMakeLists.txt
-  PREFIX ${BUILD_DIR}/glew
-  CMAKE_ARGS -DCMAKE_POSITION_INDEPENDENT_CODE=ON -DCMAKE_INSTALL_PREFIX=${LIBDIR}/glew ${DEFAULT_CMAKE_FLAGS} ${GLEW_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/glew
-)

build_files/build_environment/cmake/glfw.cmake

@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(GLFW_EXTRA_ARGS)
-
-ExternalProject_Add(external_glfw
-  URL file://${PACKAGE_DIR}/${GLFW_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${GLFW_HASH_TYPE}=${GLFW_HASH}
-  PREFIX ${BUILD_DIR}/glfw
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/glfw -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${GLFW_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/glfw
-)

build_files/build_environment/cmake/gmp.cmake

@@ -1,85 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(GMP_EXTRA_ARGS -enable-cxx)
-
-if(WIN32)
-  # Shared for windows because static libs will drag in a libgcc dependency.
-  set(GMP_OPTIONS --disable-static --enable-shared --enable-fat --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32)
-else()
-  set(GMP_OPTIONS --enable-static --disable-shared )
-endif()
-
-if(APPLE AND NOT BLENDER_PLATFORM_ARM)
-  set(GMP_OPTIONS
-    ${GMP_OPTIONS}
-    --with-pic
-  )
-elseif(UNIX AND NOT APPLE)
-  set(GMP_OPTIONS
-    ${GMP_OPTIONS}
-    --with-pic
-    --enable-fat
-  )
-endif()
-
-ExternalProject_Add(external_gmp
-  URL file://${PACKAGE_DIR}/${GMP_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${GMP_HASH_TYPE}=${GMP_HASH}
-  PREFIX ${BUILD_DIR}/gmp
-  CONFIGURE_COMMAND ${CONFIGURE_ENV_NO_PERL} && cd ${BUILD_DIR}/gmp/src/external_gmp/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/gmp ${GMP_OPTIONS} ${GMP_EXTRA_ARGS}
-  BUILD_COMMAND ${CONFIGURE_ENV_NO_PERL} && cd ${BUILD_DIR}/gmp/src/external_gmp/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV_NO_PERL} && cd ${BUILD_DIR}/gmp/src/external_gmp/ && make install
-  INSTALL_DIR ${LIBDIR}/gmp
-)
-
-if(MSVC)
-  set_target_properties(external_gmp PROPERTIES FOLDER Mingw)
-endif()
-
-if(BUILD_MODE STREQUAL Release AND WIN32)
-  ExternalProject_Add_Step(external_gmp after_install
-      COMMAND  ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/gmp/src/external_gmp/.libs/libgmp-3.dll.def ${BUILD_DIR}/gmp/src/external_gmp/.libs/libgmp-10.def
-      COMMAND  lib /def:${BUILD_DIR}/gmp/src/external_gmp/.libs/libgmp-10.def /machine:x64 /out:${BUILD_DIR}/gmp/src/external_gmp/.libs/libgmp-10.lib
-      COMMAND  ${CMAKE_COMMAND} -E copy ${LIBDIR}/gmp/bin/libgmp-10.dll ${HARVEST_TARGET}/gmp/lib/libgmp-10.dll
-      COMMAND  ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/gmp/src/external_gmp/.libs/libgmp-10.lib ${HARVEST_TARGET}/gmp/lib/libgmp-10.lib
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/gmp/include ${HARVEST_TARGET}/gmp/include
-    DEPENDEES install
-  )
-endif()
-
-if(BUILD_MODE STREQUAL Debug AND WIN32)
-ExternalProject_Add_Step(external_gmp after_install
-      COMMAND  ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/gmp/src/external_gmp/.libs/libgmp-3.dll.def ${BUILD_DIR}/gmp/src/external_gmp/.libs/libgmp-10.def
-      COMMAND  lib /def:${BUILD_DIR}/gmp/src/external_gmp/.libs/libgmp-10.def /machine:x64 /out:${BUILD_DIR}/gmp/src/external_gmp/.libs/libgmp-10.lib
-    DEPENDEES install
-  )
-endif()
-
-if(WIN32)
-  # gmpxx is somewhat special, it builds on top of the C style gmp library but exposes C++ bindings
-  # given the C++ ABI between MSVC and mingw is not compatible, we need to build the bindings
-  # with MSVC, while GMP can only be build with mingw.
-  ExternalProject_Add(external_gmpxx
-    URL file://${PACKAGE_DIR}/${GMP_FILE}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH ${GMP_HASH_TYPE}=${GMP_HASH}
-    PREFIX ${BUILD_DIR}/gmpxx
-    PATCH_COMMAND COMMAND ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/cmakelists_gmpxx.txt ${BUILD_DIR}/gmpxx/src/external_gmpxx/CMakeLists.txt &&
-                          ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/config_gmpxx.h ${BUILD_DIR}/gmpxx/src/external_gmpxx/config.h
-    CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/gmpxx ${DEFAULT_CMAKE_FLAGS} -DGMP_LIBRARY=${BUILD_DIR}/gmp/src/external_gmp/.libs/libgmp-10.lib -DGMP_INCLUDE_DIR=${BUILD_DIR}/gmp/src/external_gmp -DCMAKE_DEBUG_POSTFIX=_d
-    INSTALL_DIR ${LIBDIR}/gmpxx
-  )
-  set_target_properties(external_gmpxx PROPERTIES FOLDER Mingw)
-
-  add_dependencies(
-    external_gmpxx
-    external_gmp
-  )
-
-  ExternalProject_Add_Step(external_gmpxx after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/gmpxx/ ${HARVEST_TARGET}/gmp
-    DEPENDEES install
-  )
-
-endif()

build_files/build_environment/cmake/haru.cmake

@@ -1,30 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(HARU_EXTRA_ARGS
-  -DLIBHPDF_SHARED=OFF
-  -DLIBHPDF_STATIC=ON
-  -DLIBHPDF_EXAMPLES=OFF
-  -DLIBHPDF_ENABLE_EXCEPTIONS=ON
-)
-
-ExternalProject_Add(external_haru
-  URL file://${PACKAGE_DIR}/${HARU_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${HARU_HASH_TYPE}=${HARU_HASH}
-  PREFIX ${BUILD_DIR}/haru
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/haru/src/external_haru < ${PATCH_DIR}/haru.diff
-  CMAKE_ARGS
-    -DCMAKE_POSITION_INDEPENDENT_CODE=ON -DCMAKE_INSTALL_PREFIX=${LIBDIR}/haru
-    ${DEFAULT_CMAKE_FLAGS} ${HARU_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/haru
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_haru after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/haru/include ${HARVEST_TARGET}/haru/include
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/haru/lib/libhpdfs.lib ${HARVEST_TARGET}/haru/lib/libhpdfs.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/harvest.cmake

@@ -1,190 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-########################################################################
-# Copy all generated files to the proper structure as blender prefers
-########################################################################
-
-if(NOT DEFINED HARVEST_TARGET)
-  set(HARVEST_TARGET ${CMAKE_CURRENT_SOURCE_DIR}/Harvest)
-endif()
-message("HARVEST_TARGET = ${HARVEST_TARGET}")
-
-if(WIN32)
-
-if(BUILD_MODE STREQUAL Release)
-  add_custom_target(Harvest_Release_Results
-    COMMAND # jpeg rename libfile + copy include
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/jpg/lib/jpeg-static.lib ${HARVEST_TARGET}/jpeg/lib/libjpeg.lib &&
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/jpg/include/ ${HARVEST_TARGET}/jpeg/include/ &&
-        # png
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/png/lib/libpng16_static.lib ${HARVEST_TARGET}/png/lib/libpng.lib &&
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/png/include/ ${HARVEST_TARGET}/png/include/ &&
-        # freeglut-> opengl
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/freeglut/lib/freeglut_static.lib ${HARVEST_TARGET}/opengl/lib/freeglut_static.lib &&
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/freeglut/include/ ${HARVEST_TARGET}/opengl/include/ &&
-        # glew-> opengl
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/glew/lib/libglew32.lib ${HARVEST_TARGET}/opengl/lib/glew.lib &&
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/glew/include/ ${HARVEST_TARGET}/opengl/include/ &&
-        # tiff
-        ${CMAKE_COMMAND} -E copy ${LIBDIR}/tiff/lib/tiff.lib ${HARVEST_TARGET}/tiff/lib/libtiff.lib &&
-        ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/tiff/include/ ${HARVEST_TARGET}/tiff/include/
-    DEPENDS
-  )
-endif()
-
-else(WIN32)
-
-function(harvest from to)
-  set(pattern "")
-  foreach(f ${ARGN})
-    set(pattern ${f})
-  endforeach()
-
-  if(pattern STREQUAL "")
-    get_filename_component(dirpath ${to} DIRECTORY)
-    get_filename_component(filename ${to} NAME)
-    install(
-      FILES ${LIBDIR}/${from}
-      DESTINATION ${HARVEST_TARGET}/${dirpath}
-      RENAME ${filename})
-  else()
-    install(
-      DIRECTORY ${LIBDIR}/${from}/
-      DESTINATION ${HARVEST_TARGET}/${to}
-      USE_SOURCE_PERMISSIONS
-      FILES_MATCHING PATTERN ${pattern}
-      PATTERN "pkgconfig" EXCLUDE
-      PATTERN "cmake" EXCLUDE
-      PATTERN "__pycache__" EXCLUDE
-      PATTERN "tests" EXCLUDE)
-  endif()
-endfunction()
-
-harvest(alembic/include alembic/include "*.h")
-harvest(alembic/lib/libAlembic.a alembic/lib/libAlembic.a)
-harvest(alembic/bin alembic/bin "*")
-harvest(brotli/include brotli/include "*.h")
-harvest(brotli/lib brotli/lib "*.a")
-harvest(boost/include boost/include "*")
-harvest(boost/lib boost/lib "*.a")
-harvest(ffmpeg/include ffmpeg/include "*.h")
-harvest(ffmpeg/lib ffmpeg/lib "*.a")
-harvest(fftw3/include fftw3/include "*.h")
-harvest(fftw3/lib fftw3/lib "*.a")
-harvest(flac/lib sndfile/lib "libFLAC.a")
-harvest(freetype/include freetype/include "*.h")
-harvest(freetype/lib/libfreetype2ST.a freetype/lib/libfreetype.a)
-harvest(glew/include glew/include "*.h")
-harvest(glew/lib glew/lib "*.a")
-harvest(gmp/include gmp/include "*.h")
-harvest(gmp/lib gmp/lib "*.a")
-harvest(jemalloc/include jemalloc/include "*.h")
-harvest(jemalloc/lib jemalloc/lib "*.a")
-harvest(jpg/include jpeg/include "*.h")
-harvest(jpg/lib jpeg/lib "libjpeg.a")
-harvest(lame/lib ffmpeg/lib "*.a")
-harvest(llvm/bin llvm/bin "clang-format")
-if(BUILD_CLANG_TOOLS)
-  harvest(llvm/bin llvm/bin "clang-tidy")
-  harvest(llvm/share/clang llvm/share "run-clang-tidy.py")
-endif()
-harvest(llvm/include llvm/include "*")
-harvest(llvm/bin llvm/bin "llvm-config")
-harvest(llvm/lib llvm/lib "libLLVM*.a")
-harvest(llvm/lib llvm/lib "libclang*.a")
-harvest(llvm/lib/clang llvm/lib/clang "*.h")
-if(APPLE)
-  harvest(openmp/lib openmp/lib "*")
-  harvest(openmp/include openmp/include "*.h")
-endif()
-if(BLENDER_PLATFORM_ARM)
-  harvest(sse2neon sse2neon "*.h")
-endif()
-harvest(ogg/lib ffmpeg/lib "*.a")
-harvest(openal/include openal/include "*.h")
-if(UNIX AND NOT APPLE)
-  harvest(openal/lib openal/lib "*.a")
-
-  harvest(blosc/include blosc/include "*.h")
-  harvest(blosc/lib blosc/lib "*.a")
-
-  harvest(zlib/include zlib/include "*.h")
-  harvest(zlib/lib zlib/lib "*.a")
-
-  harvest(xml2/include xml2/include "*.h")
-  harvest(xml2/lib xml2/lib "*.a")
-
-  harvest(wayland-protocols/share/wayland-protocols wayland-protocols/share/wayland-protocols/ "*.xml")
-else()
-  harvest(blosc/lib openvdb/lib "*.a")
-  harvest(xml2/lib opencollada/lib "*.a")
-endif()
-harvest(opencollada/include/opencollada opencollada/include "*.h")
-harvest(opencollada/lib/opencollada opencollada/lib "*.a")
-harvest(opencolorio/include opencolorio/include "*.h")
-harvest(opencolorio/lib opencolorio/lib "*.a")
-harvest(opencolorio/lib/static opencolorio/lib "*.a")
-harvest(openexr/include openexr/include "*.h")
-harvest(openexr/lib openexr/lib "*.a")
-harvest(openimageio/bin openimageio/bin "idiff")
-harvest(openimageio/bin openimageio/bin "maketx")
-harvest(openimageio/bin openimageio/bin "oiiotool")
-harvest(openimageio/include openimageio/include "*")
-harvest(openimageio/lib openimageio/lib "*.a")
-harvest(openimagedenoise/include openimagedenoise/include "*")
-harvest(openimagedenoise/lib openimagedenoise/lib "*.a")
-harvest(embree/include embree/include "*.h")
-harvest(embree/lib embree/lib "*.a")
-harvest(openjpeg/include/openjpeg-2.3 openjpeg/include "*.h")
-harvest(openjpeg/lib openjpeg/lib "*.a")
-harvest(opensubdiv/include opensubdiv/include "*.h")
-harvest(opensubdiv/lib opensubdiv/lib "*.a")
-harvest(openvdb/include/openvdb openvdb/include/openvdb "*.h")
-harvest(openvdb/lib openvdb/lib "*.a")
-harvest(nanovdb/nanovdb nanovdb/include/nanovdb "*.h")
-harvest(xr_openxr_sdk/include/openxr xr_openxr_sdk/include/openxr "*.h")
-harvest(xr_openxr_sdk/lib xr_openxr_sdk/lib "*.a")
-harvest(osl/bin osl/bin "oslc")
-harvest(osl/include osl/include "*.h")
-harvest(osl/lib osl/lib "*.a")
-harvest(osl/share/OSL/shaders osl/share/OSL/shaders "*.h")
-harvest(png/include png/include "*.h")
-harvest(png/lib png/lib "*.a")
-harvest(pugixml/include pugixml/include "*.hpp")
-harvest(pugixml/lib pugixml/lib "*.a")
-harvest(python/bin python/bin "python${PYTHON_SHORT_VERSION}")
-harvest(python/include python/include "*h")
-harvest(python/lib python/lib "*")
-harvest(sdl/include/SDL2 sdl/include "*.h")
-harvest(sdl/lib sdl/lib "libSDL2.a")
-harvest(sndfile/include sndfile/include "*.h")
-harvest(sndfile/lib sndfile/lib "*.a")
-harvest(spnav/include spnav/include "*.h")
-harvest(spnav/lib spnav/lib "*.a")
-harvest(tbb/include tbb/include "*.h")
-harvest(tbb/lib/libtbb_static.a tbb/lib/libtbb.a)
-harvest(theora/lib ffmpeg/lib "*.a")
-harvest(tiff/include tiff/include "*.h")
-harvest(tiff/lib tiff/lib "*.a")
-harvest(vorbis/lib ffmpeg/lib "*.a")
-harvest(opus/lib ffmpeg/lib "*.a")
-harvest(vpx/lib ffmpeg/lib "*.a")
-harvest(webp/lib ffmpeg/lib "*.a")
-harvest(x264/lib ffmpeg/lib "*.a")
-harvest(xvidcore/lib ffmpeg/lib "*.a")
-harvest(usd/include usd/include "*.h")
-harvest(usd/lib/usd usd/lib/usd "*")
-harvest(usd/plugin usd/plugin "*")
-harvest(potrace/include potrace/include "*.h")
-harvest(potrace/lib potrace/lib "*.a")
-harvest(haru/include haru/include "*.h")
-harvest(haru/lib haru/lib "*.a")
-harvest(zstd/include zstd/include "*.h")
-harvest(zstd/lib zstd/lib "*.a")
-
-if(UNIX AND NOT APPLE)
-  harvest(libglu/lib mesa/lib "*.so*")
-  harvest(mesa/lib64 mesa/lib "*.so*")
-endif()
-
-endif()

build_files/build_environment/cmake/iconv.cmake

@@ -1,25 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(ICONV_EXTRA_ARGS)
-
-ExternalProject_Add(external_iconv
-  URL file://${PACKAGE_DIR}/${ICONV_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${ICONV_HASH_TYPE}=${ICONV_HASH}
-  PREFIX ${BUILD_DIR}/iconv
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/iconv/src/external_iconv/ && ${CONFIGURE_COMMAND} --enable-static --prefix=${mingw_LIBDIR}/iconv
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/iconv/src/external_iconv/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/iconv/src/external_iconv/ && make install
-  INSTALL_DIR ${LIBDIR}/iconv
-)
-
-if(MSVC)
-  set_target_properties(external_iconv PROPERTIES FOLDER Mingw)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_iconv after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/iconv/lib/libiconv.a ${HARVEST_TARGET}/iconv/lib/iconv.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/iconv/include/iconv.h ${HARVEST_TARGET}/iconv/include/iconv.h
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/ispc.cmake

@@ -1,76 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WIN32)
-  set(ISPC_EXTRA_ARGS_WIN
-    -DFLEX_EXECUTABLE=${LIBDIR}/flexbison/win_flex.exe
-    -DBISON_EXECUTABLE=${LIBDIR}/flexbison/win_bison.exe
-    -DM4_EXECUTABLE=${DOWNLOAD_DIR}/mingw/mingw64/msys/1.0/bin/m4.exe
-    -DARM_ENABLED=Off
-  )
-elseif(APPLE)
-  # Use bison and flex installed via Homebrew.
-  # The ones that come with Xcode toolset are too old.
-  if("${CMAKE_HOST_SYSTEM_PROCESSOR}" STREQUAL "arm64")
-    set(ISPC_EXTRA_ARGS_APPLE
-      -DBISON_EXECUTABLE=/opt/homebrew/opt/bison/bin/bison
-      -DFLEX_EXECUTABLE=/opt/homebrew/opt/flex/bin/flex
-      -DARM_ENABLED=On
-    )
-  else()
-    set(ISPC_EXTRA_ARGS_APPLE
-      -DBISON_EXECUTABLE=/usr/local/opt/bison/bin/bison
-      -DFLEX_EXECUTABLE=/usr/local/opt/flex/bin/flex
-      -DARM_ENABLED=Off
-    )
-  endif()
-elseif(UNIX)
-  set(ISPC_EXTRA_ARGS_UNIX
-    -DCMAKE_C_COMPILER=${LIBDIR}/llvm/bin/clang
-    -DCMAKE_CXX_COMPILER=${LIBDIR}/llvm/bin/clang++
-    -DARM_ENABLED=Off
-    -DFLEX_EXECUTABLE=${LIBDIR}/flex/bin/flex
-  )
-endif()
-
-set(ISPC_EXTRA_ARGS
-    -DISPC_NO_DUMPS=On
-    -DISPC_INCLUDE_EXAMPLES=Off
-    -DISPC_INCLUDE_TESTS=Off
-    -DLLVM_ROOT=${LIBDIR}/llvm/lib/cmake/llvm
-    -DLLVM_LIBRARY_DIR=${LIBDIR}/llvm/lib
-    -DCLANG_EXECUTABLE=${LIBDIR}/llvm/bin/clang
-    -DCLANGPP_EXECUTABLE=${LIBDIR}/llvm/bin/clang++
-    -DISPC_INCLUDE_TESTS=Off
-    -DCLANG_LIBRARY_DIR=${LIBDIR}/llvm/lib
-    -DCLANG_INCLUDE_DIRS=${LIBDIR}/llvm/include
-    ${ISPC_EXTRA_ARGS_WIN}
-    ${ISPC_EXTRA_ARGS_APPLE}
-    ${ISPC_EXTRA_ARGS_UNIX}
-)
-
-ExternalProject_Add(external_ispc
-  URL file://${PACKAGE_DIR}/${ISPC_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${ISPC_HASH_TYPE}=${ISPC_HASH}
-  PREFIX ${BUILD_DIR}/ispc
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/ispc/src/external_ispc < ${PATCH_DIR}/ispc.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/ispc -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${ISPC_EXTRA_ARGS} ${BUILD_DIR}/ispc/src/external_ispc
-  INSTALL_DIR ${LIBDIR}/ispc
-)
-
-add_dependencies(
-  external_ispc
-  ll
-)
-
-if(WIN32)
-  add_dependencies(
-    external_ispc
-    external_flexbison
-  )
-elseif(UNIX AND NOT APPLE)
-  add_dependencies(
-    external_ispc
-    external_flex
-  )
-endif()

build_files/build_environment/cmake/jemalloc.cmake

@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_jemalloc
-  URL file://${PACKAGE_DIR}/${JEMALLOC_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${JEMALLOC_HASH_TYPE}=${JEMALLOC_HASH}
-  PREFIX ${BUILD_DIR}/jemalloc
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/jemalloc/src/external_jemalloc/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/jemalloc --disable-shared --enable-static --with-pic
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/jemalloc/src/external_jemalloc/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/jemalloc/src/external_jemalloc/ && make install
-  INSTALL_DIR ${LIBDIR}/jemalloc
-)

build_files/build_environment/cmake/jpeg.cmake

@@ -1,46 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WIN32)
-  # cmake for windows
-  set(JPEG_EXTRA_ARGS -DNASM=${NASM_PATH} -DWITH_JPEG8=ON  -DCMAKE_DEBUG_POSTFIX=d -DWITH_CRT_DLL=On)
-
-  ExternalProject_Add(external_jpeg
-    URL file://${PACKAGE_DIR}/${JPEG_FILE}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH ${JPEG_HASH_TYPE}=${JPEG_HASH}
-    PREFIX ${BUILD_DIR}/jpg
-    CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/jpg ${DEFAULT_CMAKE_FLAGS} ${JPEG_EXTRA_ARGS}
-    INSTALL_DIR ${LIBDIR}/jpg
-  )
-
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_jpeg after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/jpg/lib/jpegd${LIBEXT}  ${LIBDIR}/jpg/lib/jpeg${LIBEXT}
-      DEPENDEES install
-    )
-  endif()
-
-  if(BUILD_MODE STREQUAL Release)
-    set(JPEG_LIBRARY jpeg-static${LIBEXT})
-  else()
-    set(JPEG_LIBRARY jpeg-staticd${LIBEXT})
-  endif()
-else(WIN32)
-  # cmake for unix
-  set(JPEG_EXTRA_ARGS
-    -DWITH_JPEG8=ON
-    -DENABLE_STATIC=ON
-    -DENABLE_SHARED=OFF
-    -DCMAKE_INSTALL_LIBDIR=${LIBDIR}/jpg/lib)
-
-  ExternalProject_Add(external_jpeg
-    URL file://${PACKAGE_DIR}/${JPEG_FILE}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH ${JPEG_HASH_TYPE}=${JPEG_HASH}
-    PREFIX ${BUILD_DIR}/jpg
-    CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/jpg ${DEFAULT_CMAKE_FLAGS} ${JPEG_EXTRA_ARGS}
-    INSTALL_DIR ${LIBDIR}/jpg
-  )
-
-  set(JPEG_LIBRARY libjpeg${LIBEXT})
-endif()

build_files/build_environment/cmake/lame.cmake

@@ -1,31 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(LAME_EXTRA_ARGS)
-if(MSVC)
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "4")
-  set(LAME_EXTRA_ARGS CFLAGS=-msse)
-  endif()
-endif()
-
-ExternalProject_Add(external_lame
-  URL file://${PACKAGE_DIR}/${LAME_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${LAME_HASH_TYPE}=${LAME_HASH}
-  PREFIX ${BUILD_DIR}/lame
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/lame/src/external_lame/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/lame --disable-shared --enable-static ${LAME_EXTRA_ARGS}
-    --enable-export=full
-    --with-fileio=sndfile
-    --without-vorbis
-    --with-pic
-    --disable-mp3x
-    --disable-mp3rtp
-    --disable-gtktest
-    --disable-frontend
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/lame/src/external_lame/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/lame/src/external_lame/ && make install
-  INSTALL_DIR ${LIBDIR}/lame
-)
-
-if(MSVC)
-  set_target_properties(external_lame PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/libglu.cmake

@@ -1,24 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(LIBGLU_CFLAGS "-static-libgcc")
-set(LIBGLU_CXXFLAGS "-static-libgcc -static-libstdc++ -Bstatic -lstdc++ -Bdynamic -l:libstdc++.a")
-set(LIBGLU_LDFLAGS "-pthread -static-libgcc -static-libstdc++ -Bstatic -lstdc++ -Bdynamic -l:libstdc++.a")
-
-set(LIBGLU_EXTRA_FLAGS
-  CFLAGS=${LIBGLU_CFLAGS}
-  CXXFLAGS=${LIBGLU_CXXFLAGS}
-  LDFLAGS=${LIBGLU_LDFLAGS}
-)
-
-ExternalProject_Add(external_libglu
-  URL file://${PACKAGE_DIR}/${LIBGLU_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${LIBGLU_HASH_TYPE}=${LIBGLU_HASH}
-  PREFIX ${BUILD_DIR}/libglu
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} &&
-    cd ${BUILD_DIR}/libglu/src/external_libglu/ &&
-    ${CONFIGURE_COMMAND_NO_TARGET} --prefix=${LIBDIR}/libglu ${LIBGLU_EXTRA_FLAGS}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/libglu/src/external_libglu/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/libglu/src/external_libglu/ && make install
-  INSTALL_DIR ${LIBDIR}/libglu
-)

build_files/build_environment/cmake/llvm.cmake

@@ -1,76 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(BLENDER_PLATFORM_ARM)
-  set(LLVM_TARGETS AArch64$<SEMICOLON>ARM)
-else()
-  set(LLVM_TARGETS X86)
-endif()
-
-if(APPLE)
-  set(LLVM_XML2_ARGS
-    -DLIBXML2_LIBRARY=${LIBDIR}/xml2/lib/libxml2.a
-  )
-  set(LLVM_BUILD_CLANG_TOOLS_EXTRA ^^clang-tools-extra)
-  set(BUILD_CLANG_TOOLS ON)
-endif()
-
-
-set(LLVM_EXTRA_ARGS
-  -DLLVM_USE_CRT_RELEASE=MD
-  -DLLVM_USE_CRT_DEBUG=MDd
-  -DLLVM_INCLUDE_TESTS=OFF
-  -DLLVM_TARGETS_TO_BUILD=${LLVM_TARGETS}
-  -DLLVM_INCLUDE_EXAMPLES=OFF
-  -DLLVM_ENABLE_TERMINFO=OFF
-  -DLLVM_BUILD_LLVM_C_DYLIB=OFF
-  -DLLVM_ENABLE_UNWIND_TABLES=OFF
-  -DLLVM_ENABLE_PROJECTS=clang${LLVM_BUILD_CLANG_TOOLS_EXTRA}
-  ${LLVM_XML2_ARGS}
-)
-
-if(WIN32)
-  set(LLVM_GENERATOR "Ninja")
-else()
-  set(LLVM_GENERATOR "Unix Makefiles")
-endif()
-
-# short project name due to long filename issues on windows
-ExternalProject_Add(ll
-  URL file://${PACKAGE_DIR}/${LLVM_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${LLVM_HASH_TYPE}=${LLVM_HASH}
-  CMAKE_GENERATOR ${LLVM_GENERATOR}
-  LIST_SEPARATOR ^^
-  PREFIX ${BUILD_DIR}/ll
-  SOURCE_SUBDIR llvm
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/ll/src/ll < ${PATCH_DIR}/llvm.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/llvm ${DEFAULT_CMAKE_FLAGS} ${LLVM_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/llvm
-)
-
-if(MSVC)
-  if(BUILD_MODE STREQUAL Release)
-    set(LLVM_HARVEST_COMMAND
-      ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/llvm/lib ${HARVEST_TARGET}/llvm/lib &&
-      ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/llvm/include ${HARVEST_TARGET}/llvm/include &&
-      ${CMAKE_COMMAND} -E copy ${LIBDIR}/llvm/bin/clang-format.exe ${HARVEST_TARGET}/llvm/bin/clang-format.exe
-    )
-  else()
-    set(LLVM_HARVEST_COMMAND
-      ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/llvm/lib/ ${HARVEST_TARGET}/llvm/debug/lib/ &&
-      ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/llvm/include/ ${HARVEST_TARGET}/llvm/debug/include/
-    )
-  endif()
-  ExternalProject_Add_Step(ll after_install
-    COMMAND ${LLVM_HARVEST_COMMAND}
-    DEPENDEES mkdir update patch download configure build install
-  )
-endif()
-
-# We currently do not build libxml2 on Windows.
-if(APPLE)
-  add_dependencies(
-    ll
-    external_xml2
-  )
-endif()

build_files/build_environment/cmake/lzma.cmake

@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(LZMA_PATCH_CMD echo .)
-
-ExternalProject_Add(external_lzma
-  URL file://${PACKAGE_DIR}/${LZMA_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${LZMA_HASH_TYPE}=${LZMA_HASH}
-  PREFIX ${BUILD_DIR}/lzma
-  PATCH_COMMAND ${LZMA_PATCH_CMD}
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/lzma/src/external_lzma/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/lzma
-    --disable-shared
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/lzma/src/external_lzma/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/lzma/src/external_lzma/ && make install
-  INSTALL_DIR ${LIBDIR}/lzma
-)

build_files/build_environment/cmake/mesa.cmake

@@ -1,55 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(MESA_CFLAGS "-static-libgcc")
-set(MESA_CXXFLAGS "-static-libgcc -static-libstdc++ -Bstatic -lstdc++ -Bdynamic -l:libstdc++.a")
-set(MESA_LDFLAGS "-L${LIBDIR}/zlib/lib -pthread -static-libgcc -static-libstdc++ -Bstatic -lstdc++ -Bdynamic -l:libstdc++.a -l:libz_pic.a")
-
-# The 'native-file', used for overrides with the meson build system.
-# meson does not provide a way to do this using command line arguments.
-#
-# Note that we can't output to "${BUILD_DIR}/mesa/src/external_mesa" as
-# it doesn't exist when CMake first executes.
-file(WRITE ${BUILD_DIR}/mesa/tmp/native-file.ini "\
-[binaries]
-llvm-config = '${LIBDIR}/llvm/bin/llvm-config'"
-)
-
-set(MESA_EXTRA_FLAGS
-  -Dbuildtype=release
-  -Dc_args=${MESA_CFLAGS}
-  -Dcpp_args=${MESA_CXXFLAGS}
-  -Dc_link_args=${MESA_LDFLAGS}
-  -Dcpp_link_args=${MESA_LDFLAGS}
-  -Dglx=gallium-xlib
-  -Dgallium-drivers=swrast
-  -Ddri-drivers=
-  -Dvulkan-drivers=
-  -Dgbm=disabled
-  -Degl=disabled
-  -Dgles1=disabled
-  -Dgles2=disabled
-  -Dshared-llvm=disabled
-  # Without this, the build fails when: `wayland-scanner` is not found.
-  # At some point we will likely want to support Wayland.
-  # Disable for now since it's not officially supported.
-  -Dplatforms=x11
-  --native-file ${BUILD_DIR}/mesa/tmp/native-file.ini
-)
-
-ExternalProject_Add(external_mesa
-  URL file://${PACKAGE_DIR}/${MESA_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${MESA_HASH_TYPE}=${MESA_HASH}
-  PREFIX ${BUILD_DIR}/mesa
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} &&
-    cd ${BUILD_DIR}/mesa/src/external_mesa/ &&
-    meson ${BUILD_DIR}/mesa/src/external_mesa-build --prefix=${LIBDIR}/mesa ${MESA_EXTRA_FLAGS}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/mesa/src/external_mesa-build && ninja -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/mesa/src/external_mesa-build && ninja install
-  INSTALL_DIR ${LIBDIR}/mesa
-)
-
-add_dependencies(
-  external_mesa
-  ll
-)

build_files/build_environment/cmake/nanovdb.cmake

@@ -1,39 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(NANOVDB_EXTRA_ARGS
-   # NanoVDB is header-only, so only need the install target
-  -DNANOVDB_BUILD_UNITTESTS=OFF
-  -DNANOVDB_BUILD_EXAMPLES=OFF
-  -DNANOVDB_BUILD_BENCHMARK=OFF
-  -DNANOVDB_BUILD_DOCS=OFF
-  -DNANOVDB_BUILD_TOOLS=OFF
-  -DNANOVDB_CUDA_KEEP_PTX=OFF
-   # Do not need to include any of the dependencies because of this
-  -DNANOVDB_USE_OPENVDB=OFF
-  -DNANOVDB_USE_OPENGL=OFF
-  -DNANOVDB_USE_OPENCL=OFF
-  -DNANOVDB_USE_CUDA=OFF
-  -DNANOVDB_USE_TBB=OFF
-  -DNANOVDB_USE_BLOSC=OFF
-  -DNANOVDB_USE_ZLIB=OFF
-  -DNANOVDB_USE_OPTIX=OFF
-  -DNANOVDB_ALLOW_FETCHCONTENT=OFF
-)
-
-ExternalProject_Add(nanovdb
-  URL file://${PACKAGE_DIR}/${NANOVDB_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${NANOVDB_HASH_TYPE}=${NANOVDB_HASH}
-  PREFIX ${BUILD_DIR}/nanovdb
-  SOURCE_SUBDIR nanovdb
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/nanovdb/src/nanovdb < ${PATCH_DIR}/nanovdb.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/nanovdb ${DEFAULT_CMAKE_FLAGS} ${NANOVDB_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/nanovdb
-)
-
-if(WIN32)
-  ExternalProject_Add_Step(nanovdb after_install
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/nanovdb/nanovdb ${HARVEST_TARGET}/nanovdb/include/nanovdb
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/nasm.cmake

@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_nasm
-  URL file://${PACKAGE_DIR}/${NASM_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${NASM_HASH_TYPE}=${NASM_HASH}
-  PREFIX ${BUILD_DIR}/nasm
-  PATCH_COMMAND ${PATCH_CMD} --verbose -p 1 -N -d ${BUILD_DIR}/nasm/src/external_nasm < ${PATCH_DIR}/nasm.diff
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/nasm/src/external_nasm/ && ./autogen.sh && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/nasm
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/nasm/src/external_nasm/ && make -j${MAKE_THREADS} && make manpages
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/nasm/src/external_nasm/ && make install
-  INSTALL_DIR ${LIBDIR}/nasm
-)
-
-if(UNIX)
-  # `touch nasm.1 ndisasm.1` helps to create the manual pages files, even when
-  # local `asciidoc` and `xmlto` packages are not installed.
-  ExternalProject_Add_Step(external_nasm after_configure
-    COMMAND  ${CMAKE_COMMAND} -E touch ${BUILD_DIR}/nasm/src/external_nasm/nasm.1 ${BUILD_DIR}/nasm/src/external_nasm/ndisasm.1
-    DEPENDEES configure
-  )
-endif()

build_files/build_environment/cmake/numpy.cmake

@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(MSVC)
-  message("BIN >${PYTHON_BINARY}<")
-  if(BUILD_MODE STREQUAL Debug)
-    set(NUMPY_DIR_POSTFIX -pydebug)
-    set(NUMPY_ARCHIVE_POSTFIX d)
-    set(NUMPY_BUILD_OPTION --debug)
-  else()
-    set(NUMPY_DIR_POSTFIX)
-    set(NUMPY_ARCHIVE_POSTFIX)
-    set(NUMPY_BUILD_OPTION)
-  endif()
-endif()
-
-set(NUMPY_POSTFIX)
-
-ExternalProject_Add(external_numpy
-  URL file://${PACKAGE_DIR}/${NUMPY_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${NUMPY_HASH_TYPE}=${NUMPY_HASH}
-  PREFIX ${BUILD_DIR}/numpy
-  PATCH_COMMAND ${NUMPY_PATCH}
-  CONFIGURE_COMMAND ""
-  LOG_BUILD 1
-  BUILD_COMMAND ${PYTHON_BINARY} ${BUILD_DIR}/numpy/src/external_numpy/setup.py build ${NUMPY_BUILD_OPTION} install --old-and-unmanageable
-  INSTALL_COMMAND ""
-)
-
-add_dependencies(
-  external_numpy
-  external_python
-  external_python_site_packages
-)

build_files/build_environment/cmake/ogg.cmake

@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_ogg
-  URL file://${PACKAGE_DIR}/${OGG_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${OGG_HASH_TYPE}=${OGG_HASH}
-  PREFIX ${BUILD_DIR}/ogg
-  PATCH_COMMAND ${PATCH_CMD} --verbose -p 1 -N -d ${BUILD_DIR}/ogg/src/external_ogg < ${PATCH_DIR}/ogg.diff
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ogg/src/external_ogg/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/ogg --disable-shared --enable-static
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ogg/src/external_ogg/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ogg/src/external_ogg/ && make install
-  INSTALL_DIR ${LIBDIR}/ogg
-)
-
-if(MSVC)
-  set_target_properties(external_ogg PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/openal.cmake

@@ -1,50 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(BUILD_MODE STREQUAL Release)
-  set(OPENAL_EXTRA_ARGS
-    -DALSOFT_UTILS=OFF
-    -DALSOFT_NO_CONFIG_UTIL=ON
-    -DALSOFT_EXAMPLES=OFF
-    -DALSOFT_TESTS=OFF
-    -DALSOFT_CONFIG=OFF
-    -DALSOFT_HRTF_DEFS=OFF
-    -DALSOFT_INSTALL=ON
-    -DALSOFT_BACKEND_SNDIO=OFF
-  )
-
-  if(UNIX)
-    set(OPENAL_EXTRA_ARGS
-      ${OPENAL_EXTRA_ARGS}
-      -DLIBTYPE=STATIC
-    )
-  endif()
-
-  if(UNIX AND NOT APPLE)
-    # Ensure we have backends for playback.
-    set(OPENAL_EXTRA_ARGS
-      ${OPENAL_EXTRA_ARGS}
-      -DALSOFT_REQUIRE_ALSA=ON
-      -DALSOFT_REQUIRE_OSS=ON
-      -DALSOFT_REQUIRE_PULSEAUDIO=ON
-    )
-  endif()
-
-  ExternalProject_Add(external_openal
-    URL file://${PACKAGE_DIR}/${OPENAL_FILE}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH ${OPENAL_HASH_TYPE}=${OPENAL_HASH}
-    PREFIX ${BUILD_DIR}/openal
-    CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openal ${DEFAULT_CMAKE_FLAGS} ${OPENAL_EXTRA_ARGS}
-    INSTALL_DIR ${LIBDIR}/openal
-  )
-
-  if(WIN32)
-    ExternalProject_Add_Step(external_openal after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openal/lib/openal32.lib ${HARVEST_TARGET}/openal/lib/openal32.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openal/bin/openal32.dll ${HARVEST_TARGET}/openal/lib/openal32.dll
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openal/include/ ${HARVEST_TARGET}/openal/include/
-      DEPENDEES install
-    )
-  endif()
-
-endif()

build_files/build_environment/cmake/opencollada.cmake

@@ -1,49 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(UNIX)
-  set(OPENCOLLADA_EXTRA_ARGS
-    -DLIBXML2_INCLUDE_DIR=${LIBDIR}/xml2/include/libxml2
-    -DLIBXML2_LIBRARIES=${LIBDIR}/xml2/lib/libxml2.a)
-endif()
-
-ExternalProject_Add(external_opencollada
-  URL file://${PACKAGE_DIR}/${OPENCOLLADA_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${OPENCOLLADA_HASH_TYPE}=${OPENCOLLADA_HASH}
-  PREFIX ${BUILD_DIR}/opencollada
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -N -d ${BUILD_DIR}/opencollada/src/external_opencollada < ${PATCH_DIR}/opencollada.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/opencollada ${DEFAULT_CMAKE_FLAGS} ${OPENCOLLADA_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/opencollada
-)
-
-if(UNIX)
-  add_dependencies(
-    external_opencollada
-    external_xml2
-  )
-endif()
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_opencollada after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/opencollada/ ${HARVEST_TARGET}/opencollada/
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_opencollada after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/buffer.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/buffer_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/ftoa.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/ftoa_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/GeneratedSaxParser.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/GeneratedSaxParser_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/MathMLSolver.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/MathMLSolver_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/OpenCOLLADABaseUtils.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/OpenCOLLADABaseUtils_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/OpenCOLLADAFramework.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/OpenCOLLADAFramework_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/OpenCOLLADASaxFrameworkLoader.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/OpenCOLLADASaxFrameworkLoader_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/OpenCOLLADAStreamWriter.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/OpenCOLLADAStreamWriter_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/pcre.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/pcre_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/UTF.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/UTF_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencollada/lib/opencollada/xml.lib ${HARVEST_TARGET}/opencollada/lib/opencollada/xml_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/opencolorio.cmake

@@ -1,85 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(OPENCOLORIO_EXTRA_ARGS
-  -DOCIO_BUILD_APPS=OFF
-  -DOCIO_BUILD_PYTHON=OFF
-  -DOCIO_BUILD_NUKE=OFF
-  -DOCIO_BUILD_JAVA=OFF
-  -DBUILD_SHARED_LIBS=OFF
-  -DOCIO_BUILD_DOCS=OFF
-  -DOCIO_BUILD_TESTS=OFF
-  -DOCIO_BUILD_GPU_TESTS=OFF
-  -DOCIO_USE_SSE=ON
-
-  # Manually build ext packages except for pystring, which does not have
-  # a CMake or autotools build system that we can easily use.
-  -DOCIO_INSTALL_EXT_PACKAGES=MISSING
-  -DHalf_ROOT=${LIBDIR}/openexr
-  -DHalf_STATIC_LIBRARY=ON
-  -Dexpat_ROOT=${LIBDIR}/expat
-  -Dyaml-cpp_ROOT=${LIBDIR}/yamlcpp
-)
-
-if(BLENDER_PLATFORM_ARM)
-  set(OPENCOLORIO_EXTRA_ARGS
-    ${OPENCOLORIO_EXTRA_ARGS}
-    -DOCIO_USE_SSE=OFF
-  )
-endif()
-
-if(WIN32)
-  set(OPENCOLORIO_EXTRA_ARGS
-    ${OPENCOLORIO_EXTRA_ARGS}
-    -DOCIO_INLINES_HIDDEN=OFF
-  )
-else()
-  set(OPENCOLORIO_EXTRA_ARGS
-    ${OPENCOLORIO_EXTRA_ARGS}
-  )
-endif()
-
-ExternalProject_Add(external_opencolorio
-  URL file://${PACKAGE_DIR}/${OPENCOLORIO_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${OPENCOLORIO_HASH_TYPE}=${OPENCOLORIO_HASH}
-  PREFIX ${BUILD_DIR}/opencolorio
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -N -d ${BUILD_DIR}/opencolorio/src/external_opencolorio < ${PATCH_DIR}/opencolorio.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/opencolorio ${DEFAULT_CMAKE_FLAGS} ${OPENCOLORIO_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/opencolorio
-)
-
-add_dependencies(
-  external_opencolorio
-  external_yamlcpp
-  external_expat
-  external_openexr
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_opencolorio after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/opencolorio/include ${HARVEST_TARGET}/opencolorio/include
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/opencolorio/lib ${HARVEST_TARGET}/opencolorio/lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/yamlcpp/lib/libyaml-cppmd.lib ${HARVEST_TARGET}/opencolorio/lib/libyaml-cpp.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/expat/lib/libexpatMD.lib ${HARVEST_TARGET}/opencolorio/lib/libexpatMD.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/opencolorio/src/external_opencolorio-build/ext/dist/lib/pystring.lib ${HARVEST_TARGET}/opencolorio/lib/pystring.lib
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_opencolorio after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opencolorio/lib/Opencolorio.lib ${HARVEST_TARGET}/opencolorio/lib/OpencolorIO_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/yamlcpp/lib/libyaml-cppmdd.lib ${HARVEST_TARGET}/opencolorio/lib/libyaml-cpp_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/expat/lib/libexpatdMD.lib ${HARVEST_TARGET}/opencolorio/lib/libexpatdMD.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/opencolorio/src/external_opencolorio-build/ext/dist/lib/pystring.lib ${HARVEST_TARGET}/opencolorio/lib/pystring_d.lib
-      DEPENDEES install
-    )
-  endif()
-else()
-    ExternalProject_Add_Step(external_opencolorio after_install
-      COMMAND cp ${LIBDIR}/yamlcpp/lib/libyaml-cpp.a ${LIBDIR}/opencolorio/lib/
-      COMMAND cp ${LIBDIR}/expat/lib/libexpat.a ${LIBDIR}/opencolorio/lib/
-      COMMAND cp ${BUILD_DIR}/opencolorio/src/external_opencolorio-build/ext/dist/lib/libpystring.a ${LIBDIR}/opencolorio/lib/
-      DEPENDEES install
-    )
-endif()

build_files/build_environment/cmake/openexr.cmake

@@ -1,48 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WIN32)
-  set(OPENEXR_CMAKE_CXX_STANDARD_LIBRARIES "kernel32${LIBEXT} user32${LIBEXT} gdi32${LIBEXT} winspool${LIBEXT} shell32${LIBEXT} ole32${LIBEXT} oleaut32${LIBEXT} uuid${LIBEXT} comdlg32${LIBEXT} advapi32${LIBEXT} psapi${LIBEXT}")
-  set(OPENEXR_EXTRA_ARGS
-    -DCMAKE_CXX_STANDARD_LIBRARIES=${OPENEXR_CMAKE_CXX_STANDARD_LIBRARIES}
-  )
-else()
-  set(OPENEXR_EXTRA_ARGS
-  )
-endif()
-
-set(OPENEXR_EXTRA_ARGS
-  ${OPENEXR_EXTRA_ARGS}
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-  -DBUILD_TESTING=OFF
-  -DOPENEXR_BUILD_BOTH_STATIC_SHARED=OFF
-  -DILMBASE_BUILD_BOTH_STATIC_SHARED=OFF
-  -DBUILD_SHARED_LIBS=OFF
-  -DOPENEXR_BUILD_UTILS=OFF
-  -DPYILMBASE_ENABLE=OFF
-  -DOPENEXR_VIEWERS_ENABLE=OFF
-  -DILMBASE_LIB_SUFFIX=${OPENEXR_VERSION_BUILD_POSTFIX}
-  -DOPENEXR_LIB_SUFFIX=${OPENEXR_VERSION_BUILD_POSTFIX}
-)
-
-ExternalProject_Add(external_openexr
-  URL file://${PACKAGE_DIR}/${OPENEXR_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${OPENEXR_HASH_TYPE}=${OPENEXR_HASH}
-  PREFIX ${BUILD_DIR}/openexr
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openexr ${DEFAULT_CMAKE_FLAGS} ${OPENEXR_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/openexr
-)
-
-if(WIN32)
-  ExternalProject_Add_Step(external_openexr after_install
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openexr/lib ${HARVEST_TARGET}/openexr/lib
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openexr/include ${HARVEST_TARGET}/openexr/include
-    DEPENDEES install
-  )
-endif()
-
-add_dependencies(
-  external_openexr
-  external_zlib
-)

build_files/build_environment/cmake/openimagedenoise.cmake

@@ -1,60 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-
-set(OIDN_EXTRA_ARGS
-  -DOIDN_APPS=OFF
-  -DTBB_ROOT=${LIBDIR}/tbb
-  -DTBB_STATIC_LIB=${TBB_STATIC_LIBRARY}
-  -DOIDN_STATIC_LIB=ON
-  -DOIDN_STATIC_RUNTIME=OFF
-  -DISPC_EXECUTABLE=${LIBDIR}/ispc/bin/ispc
-)
-
-if(WIN32)
-  set(OIDN_EXTRA_ARGS
-    ${OIDN_EXTRA_ARGS}
-    -DTBB_DEBUG_LIBRARY=${LIBDIR}/tbb/lib/tbb.lib
-    -DTBB_DEBUG_LIBRARY_MALLOC=${LIBDIR}/tbb/lib/tbbmalloc.lib
-  )
-else()
-  set(OIDN_EXTRA_ARGS
-    ${OIDN_EXTRA_ARGS}
-    -Dtbb_LIBRARY_RELEASE=${LIBDIR}/tbb/lib/tbb_static.a
-    -Dtbbmalloc_LIBRARY_RELEASE=${LIBDIR}/tbb/lib/tbbmalloc_static.a
-  )
-endif()
-
-ExternalProject_Add(external_openimagedenoise
-  URL file://${PACKAGE_DIR}/${OIDN_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${OIDN_HASH_TYPE}=${OIDN_HASH}
-  PREFIX ${BUILD_DIR}/openimagedenoise
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openimagedenoise ${DEFAULT_CMAKE_FLAGS} ${OIDN_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/openimagedenoise
-)
-
-add_dependencies(
-  external_openimagedenoise
-  external_tbb
-  external_ispc
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_openimagedenoise after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openimagedenoise/include ${HARVEST_TARGET}/openimagedenoise/include
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimagedenoise/lib/openimagedenoise.lib ${HARVEST_TARGET}/openimagedenoise/lib/openimagedenoise.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimagedenoise/lib/common.lib ${HARVEST_TARGET}/openimagedenoise/lib/common.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimagedenoise/lib/dnnl.lib ${HARVEST_TARGET}/openimagedenoise/lib/dnnl.lib
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_openimagedenoise after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimagedenoise/lib/openimagedenoise.lib ${HARVEST_TARGET}/openimagedenoise/lib/openimagedenoise_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimagedenoise/lib/common.lib ${HARVEST_TARGET}/openimagedenoise/lib/common_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimagedenoise/lib/dnnl.lib ${HARVEST_TARGET}/openimagedenoise/lib/dnnl_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/openimageio.cmake

@@ -1,145 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(BUILD_MODE STREQUAL Release)
-  set(OIIO_TOOLS ON)
-else()
-  set(OIIO_TOOLS OFF)
-endif()
-
-if(UNIX AND NOT APPLE)
-  # This causes linking to static pthread libraries which gives link errors.
-  # Since we manually specify library paths it should static link other libs.
-  set(OPENIMAGEIO_LINKSTATIC -DLINKSTATIC=OFF)
-else()
-  set(OPENIMAGEIO_LINKSTATIC -DLINKSTATIC=ON)
-endif()
-
-if(WIN32)
-  set(PNG_LIBNAME libpng16_static${LIBEXT})
-  set(OIIO_SIMD_FLAGS -DUSE_SIMD=sse2)
-  set(OPENJPEG_POSTFIX _msvc)
-else()
-  set(PNG_LIBNAME libpng${LIBEXT})
-  set(OIIO_SIMD_FLAGS)
-endif()
-
-if(WITH_WEBP)
-  set(WEBP_ARGS
-    -DWEBP_INCLUDE_DIR=${LIBDIR}/webp/include
-    -DWEBP_LIBRARY=${LIBDIR}/webp/lib/${LIBPREFIX}webp${LIBEXT}
-  )
-  set(WEBP_DEP external_webp)
-endif()
-
-if(MSVC)
-  set(OPENJPEG_FLAGS
-    -DOpenJpeg_ROOT=${LIBDIR}/openjpeg_msvc
-  )
-else()
-  set(OPENJPEG_FLAGS
-    -DOpenJpeg_ROOT=${LIBDIR}/openjpeg
-  )
-endif()
-
-set(OPENIMAGEIO_EXTRA_ARGS
-  -DBUILD_SHARED_LIBS=OFF
-  ${OPENIMAGEIO_LINKSTATIC}
-  -DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-  -DBoost_USE_MULTITHREADED=ON
-  -DBoost_USE_STATIC_LIBS=ON
-  -DBoost_USE_STATIC_RUNTIME=OFF
-  -DBOOST_ROOT=${LIBDIR}/boost
-  -DBOOST_LIBRARYDIR=${LIBDIR}/boost/lib/
-  -DBoost_NO_SYSTEM_PATHS=ON
-  -DBoost_NO_BOOST_CMAKE=ON
-  -DUSE_LIBSQUISH=OFF
-  -DUSE_QT5=OFF
-  -DUSE_NUKE=OFF
-  -DUSE_OPENVDB=OFF
-  -DUSE_BZIP2=OFF
-  -DUSE_FREETYPE=OFF
-  -DUSE_DCMTK=OFF
-  -DUSE_LIBHEIF=OFF
-  -DUSE_OPENGL=OFF
-  -DUSE_TBB=OFF
-  -DUSE_FIELD3D=OFF
-  -DUSE_QT=OFF
-  -DUSE_PYTHON=OFF
-  -DUSE_GIF=OFF
-  -DUSE_OPENCV=OFF
-  -DUSE_OPENJPEG=ON
-  -DUSE_FFMPEG=OFF
-  -DUSE_PTEX=OFF
-  -DUSE_FREETYPE=OFF
-  -DUSE_LIBRAW=OFF
-  -DUSE_OPENCOLORIO=OFF
-  -DUSE_WEBP=${WITH_WEBP}
-  -DOIIO_BUILD_TOOLS=${OIIO_TOOLS}
-  -DOIIO_BUILD_TESTS=OFF
-  -DBUILD_TESTING=OFF
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include
-  -DPNG_LIBRARY=${LIBDIR}/png/lib/${PNG_LIBNAME}
-  -DPNG_PNG_INCLUDE_DIR=${LIBDIR}/png/include
-  -DTIFF_LIBRARY=${LIBDIR}/tiff/lib/${LIBPREFIX}tiff${LIBEXT}
-  -DTIFF_INCLUDE_DIR=${LIBDIR}/tiff/include
-  -DJPEG_LIBRARY=${LIBDIR}/jpg/lib/${JPEG_LIBRARY}
-  -DJPEG_INCLUDE_DIR=${LIBDIR}/jpg/include
-  ${OPENJPEG_FLAGS}
-  -DOpenEXR_USE_STATIC_LIBS=On
-  -DILMBASE_INCLUDE_DIR=${LIBDIR}/openexr/include/
-  -DOPENEXR_INCLUDE_DIR=${LIBDIR}/openexr/include/
-  -DOPENEXR_HALF_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}Half${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_IMATH_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}Imath${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_ILMTHREAD_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmThread${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_IEX_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}Iex${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_ILMIMF_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DSTOP_ON_WARNING=OFF
-  -DUSE_EXTERNAL_PUGIXML=ON
-  -DPUGIXML_LIBRARY=${LIBDIR}/pugixml/lib/${LIBPREFIX}pugixml${LIBEXT}
-  -DPUGIXML_INCLUDE_DIR=${LIBDIR}/pugixml/include/
-  ${WEBP_FLAGS}
-  ${OIIO_SIMD_FLAGS}
-)
-
-ExternalProject_Add(external_openimageio
-  URL file://${PACKAGE_DIR}/${OPENIMAGEIO_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${OPENIMAGEIO_HASH_TYPE}=${OPENIMAGEIO_HASH}
-  PREFIX ${BUILD_DIR}/openimageio
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -N -d ${BUILD_DIR}/openimageio/src/external_openimageio/ < ${PATCH_DIR}/openimageio.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openimageio ${DEFAULT_CMAKE_FLAGS} ${OPENIMAGEIO_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/openimageio
-)
-
-add_dependencies(
-  external_openimageio
-  external_png
-  external_zlib
-  external_openexr
-  external_jpeg
-  external_boost
-  external_tiff
-  external_pugixml
-  external_openjpeg${OPENJPEG_POSTFIX}
-  ${WEBP_DEP}
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_openimageio after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/OpenImageIO/include ${HARVEST_TARGET}/OpenImageIO/include
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/OpenImageIO/lib ${HARVEST_TARGET}/OpenImageIO/lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/OpenImageIO/bin/idiff.exe ${HARVEST_TARGET}/OpenImageIO/bin/idiff.exe
-
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_openimageio after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimageio/lib/OpenImageIO.lib ${HARVEST_TARGET}/openimageio/lib/OpenImageIO_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openimageio/lib/OpenImageIO_Util.lib ${HARVEST_TARGET}/openimageio/lib/OpenImageIO_Util_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/openjpeg.cmake

@@ -1,48 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-# Note the encoder/decoder may use png/tiff/lcms system libraries, but the
-# library itself does not depend on them, so should give no problems.
-
-set(OPENJPEG_EXTRA_ARGS -DBUILD_SHARED_LIBS=OFF)
-
-if(WIN32)
-  set(OPENJPEG_EXTRA_ARGS -G "MSYS Makefiles" -DBUILD_PKGCONFIG_FILES=On)
-else()
-  set(OPENJPEG_EXTRA_ARGS ${DEFAULT_CMAKE_FLAGS})
-endif()
-
-ExternalProject_Add(external_openjpeg
-  URL file://${PACKAGE_DIR}/${OPENJPEG_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${OPENJPEG_HASH_TYPE}=${OPENJPEG_HASH}
-  PREFIX ${BUILD_DIR}/openjpeg
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/openjpeg/src/external_openjpeg-build && ${CMAKE_COMMAND} ${OPENJPEG_EXTRA_ARGS} -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openjpeg -DBUILD_SHARED_LIBS=Off -DBUILD_THIRDPARTY=OFF ${BUILD_DIR}/openjpeg/src/external_openjpeg
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/openjpeg/src/external_openjpeg-build/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/openjpeg/src/external_openjpeg-build/ && make install
-  INSTALL_DIR ${LIBDIR}/openjpeg
-)
-
-# On windows ffmpeg wants a mingw build, while oiio needs a msvc build.
-if(MSVC)
-  set(OPENJPEG_EXTRA_ARGS ${DEFAULT_CMAKE_FLAGS})
-  ExternalProject_Add(external_openjpeg_msvc
-    URL file://${PACKAGE_DIR}/${OPENJPEG_FILE}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH ${OPENJPEG_HASH_TYPE}=${OPENJPEG_HASH}
-    PREFIX ${BUILD_DIR}/openjpeg_msvc
-    CMAKE_ARGS ${OPENJPEG_EXTRA_ARGS} -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openjpeg_msvc -DBUILD_SHARED_LIBS=Off -DBUILD_THIRDPARTY=OFF
-    INSTALL_DIR ${LIBDIR}/openjpeg_msvc
-  )
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_openjpeg_msvc after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openjpeg_msvc/lib ${HARVEST_TARGET}/openjpeg/lib &&
-          ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openjpeg_msvc/include ${HARVEST_TARGET}/openjpeg/include
-      DEPENDEES install
-    )
-  endif()
-endif()
-
-set(OPENJPEG_LIBRARY libopenjp2${LIBEXT})
-if(MSVC)
-  set_target_properties(external_openjpeg PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/openmp.cmake

@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(APPLE)
-  set(OPENMP_PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/openmp/src/external_openmp < ${PATCH_DIR}/openmp.diff)
-else()
-  set(OPENMP_PATCH_COMMAND)
-endif()
-
-ExternalProject_Add(external_openmp
-  URL file://${PACKAGE_DIR}/${OPENMP_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${OPENMP_HASH_TYPE}=${OPENMP_HASH}
-  PREFIX ${BUILD_DIR}/openmp
-  PATCH_COMMAND ${OPENMP_PATCH_COMMAND}
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openmp ${DEFAULT_CMAKE_FLAGS}
-  INSTALL_COMMAND cd ${BUILD_DIR}/openmp/src/external_openmp-build && install_name_tool -id @rpath/libomp.dylib runtime/src/libomp.dylib && make install
-  INSTALL_DIR ${LIBDIR}/openmp
-)
-
-add_dependencies(
-  external_openmp
-  ll
-)

build_files/build_environment/cmake/opensubdiv.cmake

@@ -1,84 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(OPENSUBDIV_EXTRA_ARGS
-  -DNO_EXAMPLES=ON
-  -DNO_REGRESSION=ON
-  -DNO_PYTHON=ON
-  -DNO_MAYA=ON
-  -DNO_PTEX=ON
-  -DNO_DOC=ON
-  -DNO_CLEW=OFF
-  -DNO_OPENCL=OFF
-  -DNO_TUTORIALS=ON
-  -DGLEW_INCLUDE_DIR=${LIBDIR}/glew/include
-  -DGLEW_LIBRARY=${LIBDIR}/glew/lib/libGLEW${LIBEXT}
-  -DGLFW_INCLUDE_DIR=${LIBDIR}/glfw/include
-  -DGLFW_LIBRARIES=${LIBDIR}/glfw/lib/glfw3${LIBEXT}
-)
-
-if(WIN32)
-  set(OPENSUBDIV_EXTRA_ARGS
-    ${OPENSUBDIV_EXTRA_ARGS}
-    -DTBB_INCLUDE_DIR=${LIBDIR}/tbb/include
-    -DTBB_LIBRARIES=${LIBDIR}/tbb/lib/tbb.lib
-    -DCLEW_INCLUDE_DIR=${LIBDIR}/clew/include/CL
-    -DCLEW_LIBRARY=${LIBDIR}/clew/lib/clew${LIBEXT}
-    -DCUEW_INCLUDE_DIR=${LIBDIR}/cuew/include
-    -DCUEW_LIBRARY=${LIBDIR}/cuew/lib/cuew${LIBEXT}
-  )
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    set(OPENSUBDIV_EXTRA_ARGS
-      ${OPENSUBDIV_EXTRA_ARGS}
-      -DNO_CUDA=OFF
-    )
-  else()
-    set(OPENSUBDIV_EXTRA_ARGS
-      ${OPENSUBDIV_EXTRA_ARGS}
-      -DNO_CUDA=ON
-    )
-  endif()
-
-else()
-  set(OPENSUBDIV_EXTRA_ARGS
-    ${OPENSUBDIV_EXTRA_ARGS}
-    -DNO_CUDA=ON
-    -DCUEW_INCLUDE_DIR=${LIBDIR}/cuew/include
-    -DCLEW_INCLUDE_DIR=${LIBDIR}/clew/include/CL
-    -DCLEW_LIBRARY=${LIBDIR}/clew/lib/static/${LIBPREFIX}clew${LIBEXT}
-  )
-endif()
-
-ExternalProject_Add(external_opensubdiv
-  URL file://${PACKAGE_DIR}/${OPENSUBDIV_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${OPENSUBDIV_HASH_TYPE}=${OPENSUBDIV_HASH}
-  PREFIX ${BUILD_DIR}/opensubdiv
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/opensubdiv -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${OPENSUBDIV_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/opensubdiv
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_opensubdiv after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/opensubdiv/lib ${HARVEST_TARGET}/opensubdiv/lib
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/opensubdiv/include ${HARVEST_TARGET}/opensubdiv/include
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_opensubdiv after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opensubdiv/lib/osdCPU.lib ${HARVEST_TARGET}/opensubdiv/lib/osdCPU_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/opensubdiv/lib/osdGPU.lib ${HARVEST_TARGET}/opensubdiv/lib/osdGPU_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()
-
-add_dependencies(
-  external_opensubdiv
-  external_glew
-  external_glfw
-  external_clew
-  external_cuew
-  external_tbb
-)

build_files/build_environment/cmake/openvdb.cmake

@@ -1,98 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(BUILD_MODE STREQUAL Debug)
-  set(BLOSC_POST _d)
-endif()
-
-if(WIN32)
-  set(OPENVDB_SHARED ON)
-  set(OPENVDB_STATIC OFF)
-else()
-  set(OPENVDB_SHARED OFF)
-  set(OPENVDB_STATIC ON)
-endif()
-
-set(OPENVDB_EXTRA_ARGS
-  -DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-  -DBoost_USE_MULTITHREADED=ON
-  -DBoost_USE_STATIC_LIBS=ON
-  -DBoost_USE_STATIC_RUNTIME=OFF
-  -DBOOST_ROOT=${LIBDIR}/boost
-  -DBoost_NO_SYSTEM_PATHS=ON
-  -DBoost_NO_BOOST_CMAKE=ON
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-  -DBlosc_INCLUDE_DIR=${LIBDIR}/blosc/include/
-  -DBlosc_LIBRARY=${LIBDIR}/blosc/lib/libblosc${BLOSC_POST}${LIBEXT}
-  -DOPENVDB_ENABLE_3_ABI_COMPATIBLE=OFF
-  -DOPENVDB_BUILD_UNITTESTS=Off
-  -DOPENVDB_BUILD_PYTHON_MODULE=Off
-  -DBlosc_ROOT=${LIBDIR}/blosc/
-  -DTBB_ROOT=${LIBDIR}/tbb/
-  -DOpenEXR_ROOT=${LIBDIR}/openexr
-  -DIlmBase_ROOT=${LIBDIR}/openexr
-  -DOPENEXR_LIBRARYDIR=${LIBDIR}/openexr/lib
-   # All libs live in openexr, even the ilmbase ones
-  -DILMBASE_LIBRARYDIR=${LIBDIR}/openexr/lib
-  -DOPENVDB_CORE_SHARED=${OPENVDB_SHARED}
-  -DOPENVDB_CORE_STATIC=${OPENVDB_STATIC}
-  -DOPENVDB_BUILD_BINARIES=Off
-  -DCMAKE_DEBUG_POSTFIX=_d
-  -DILMBASE_USE_STATIC_LIBS=On
-  -DOPENEXR_USE_STATIC_LIBS=On
-)
-
-if(WIN32)
-  # Namespaces seem to be buggy and cause linker errors due to things not
-  # being in the correct namespace
-  # needs to link pthreads due to it being a blosc dependency
-  set(OPENVDB_EXTRA_ARGS ${OPENVDB_EXTRA_ARGS}
-    -DCMAKE_CXX_STANDARD_LIBRARIES="${LIBDIR}/pthreads/lib/pthreadVC3.lib"
-    -DUSE_EXR=On
-  )
-else()
-  # OpenVDB can't find the _static libraries automatically.
-  set(OPENVDB_EXTRA_ARGS ${OPENVDB_EXTRA_ARGS}
-    -DTbb_LIBRARIES=${LIBDIR}/tbb/lib/${LIBPREFIX}tbb_static${LIBEXT}
-    -DTbb_tbb_LIBRARY=${LIBDIR}/tbb/lib/${LIBPREFIX}tbb_static${LIBEXT}
-    -DTbb_tbbmalloc_LIBRARY=${LIBDIR}/tbb/lib/${LIBPREFIX}tbbmalloc_static${LIBEXT}
-    -DTbb_tbbmalloc_proxy_LIBRARY=${LIBDIR}/tbb/lib/${LIBPREFIX}tbbmalloc_proxy_static${LIBEXT}
-  )
-endif()
-
-ExternalProject_Add(openvdb
-  URL file://${PACKAGE_DIR}/${OPENVDB_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${OPENVDB_HASH_TYPE}=${OPENVDB_HASH}
-  PREFIX ${BUILD_DIR}/openvdb
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/openvdb/src/openvdb < ${PATCH_DIR}/openvdb.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openvdb ${DEFAULT_CMAKE_FLAGS} ${OPENVDB_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/openvdb
-)
-
-add_dependencies(
-  openvdb
-  external_tbb
-  external_boost
-  external_openexr
-  external_zlib
-  external_blosc
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(openvdb after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/openvdb/include/openvdb ${HARVEST_TARGET}/openvdb/include/openvdb
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openvdb/lib/openvdb.lib ${HARVEST_TARGET}/openvdb/lib/openvdb.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openvdb/bin/openvdb.dll ${HARVEST_TARGET}/openvdb/bin/openvdb.dll
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(openvdb after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openvdb/lib/openvdb_d.lib ${HARVEST_TARGET}/openvdb/lib/openvdb_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/openvdb/bin/openvdb_d.dll ${HARVEST_TARGET}/openvdb/bin/openvdb_d.dll
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/options.cmake

@@ -1,211 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WIN32)
-  option(ENABLE_MINGW64 "Enable building of ffmpeg/iconv/libsndfile/fftw3 by installing mingw64" ON)
-endif()
-option(WITH_WEBP "Enable building of oiio with webp support" OFF)
-option(WITH_BOOST_PYTHON "Enable building of boost with python support" OFF)
-cmake_host_system_information(RESULT NUM_CORES QUERY NUMBER_OF_LOGICAL_CORES)
-set(MAKE_THREADS ${NUM_CORES} CACHE STRING "Number of threads to run make with")
-
-if(NOT BUILD_MODE)
-  set(BUILD_MODE "Release")
-  message(STATUS "Build type not specified: defaulting to a release build.")
-endif()
-message("BuildMode = ${BUILD_MODE}")
-
-if(BUILD_MODE STREQUAL "Debug")
-  set(LIBDIR ${CMAKE_CURRENT_BINARY_DIR}/Debug)
-else(BUILD_MODE STREQUAL "Debug")
-  set(LIBDIR ${CMAKE_CURRENT_BINARY_DIR}/Release)
-endif()
-
-set(DOWNLOAD_DIR "${CMAKE_CURRENT_BINARY_DIR}/downloads" CACHE STRING "Path for downloaded files")
-# This path must be hard-coded like this, so that the GNUmakefile knows where it is and can pass it to make_source_archive.py:
-set(PACKAGE_DIR "${CMAKE_CURRENT_BINARY_DIR}/packages")
-option(PACKAGE_USE_UPSTREAM_SOURCES "Use sources upstream to download the package sources, when OFF the blender mirror will be used" ON)
-
-file(TO_CMAKE_PATH ${DOWNLOAD_DIR} DOWNLOAD_DIR)
-file(TO_CMAKE_PATH ${PACKAGE_DIR} PACKAGE_DIR)
-set(PATCH_DIR ${CMAKE_CURRENT_SOURCE_DIR}/patches)
-set(BUILD_DIR ${CMAKE_CURRENT_BINARY_DIR}/build)
-
-message("LIBDIR = ${LIBDIR}")
-message("DOWNLOAD_DIR = ${DOWNLOAD_DIR}")
-message("PACKAGE_DIR = ${PACKAGE_DIR}")
-message("PATCH_DIR = ${PATCH_DIR}")
-message("BUILD_DIR = ${BUILD_DIR}")
-
-if(WIN32)
-  set(PATCH_CMD ${DOWNLOAD_DIR}/mingw/mingw64/msys/1.0/bin/patch.exe)
-  set(LIBEXT ".lib")
-  set(LIBPREFIX "")
-
-  # For OIIO and OSL
-  set(COMMON_DEFINES /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS)
-
-  if(MSVC_VERSION GREATER 1909)
-    set(COMMON_MSVC_FLAGS "/Wv:18") #some deps with warnings as error aren't quite ready for dealing with the new 2017 warnings.
-  endif()
-  string(APPEND COMMON_MSVC_FLAGS " /bigobj")
-  if(WITH_OPTIMIZED_DEBUG)
-    set(BLENDER_CMAKE_C_FLAGS_DEBUG "/MDd ${COMMON_MSVC_FLAGS} /O2 /Ob2 /DNDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  else()
-    set(BLENDER_CMAKE_C_FLAGS_DEBUG "/MDd ${COMMON_MSVC_FLAGS} /Zi /Ob0 /Od /RTC1 /D_DEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  endif()
-  set(BLENDER_CMAKE_C_FLAGS_MINSIZEREL "/MD ${COMMON_MSVC_FLAGS} /O1 /Ob1 /D NDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  set(BLENDER_CMAKE_C_FLAGS_RELEASE "/MD ${COMMON_MSVC_FLAGS} /O2 /Ob2 /DNDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  set(BLENDER_CMAKE_C_FLAGS_RELWITHDEBINFO "/MD ${COMMON_MSVC_FLAGS} /Zi /O2 /Ob1 /D NDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-
-  if(WITH_OPTIMIZED_DEBUG)
-    set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "/MDd ${COMMON_MSVC_FLAGS} /O2 /Ob2 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  else()
-    set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "/D_DEBUG /D PLATFORM_WINDOWS /MTd  ${COMMON_MSVC_FLAGS} /Zi /Ob0 /Od /RTC1 /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  endif()
-  set(BLENDER_CMAKE_CXX_FLAGS_MINSIZEREL "/MD /${COMMON_MSVC_FLAGS} /O1 /Ob1 /D NDEBUG  /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  set(BLENDER_CMAKE_CXX_FLAGS_RELEASE "/MD ${COMMON_MSVC_FLAGS} /O2 /Ob2 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-  set(BLENDER_CMAKE_CXX_FLAGS_RELWITHDEBINFO "/MD ${COMMON_MSVC_FLAGS} /Zi /O2 /Ob1 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-
-  set(PLATFORM_FLAGS)
-  set(PLATFORM_CXX_FLAGS)
-  set(PLATFORM_CMAKE_FLAGS)
-
-  set(MINGW_PATH ${DOWNLOAD_DIR}/mingw/mingw64)
-  set(MINGW_SHELL ming64sh.cmd)
-  set(PERL_SHELL ${DOWNLOAD_DIR}/perl/portableshell.bat)
-  set(MINGW_HOST x86_64-w64-mingw32)
-
-  set(CONFIGURE_ENV
-    cd ${MINGW_PATH} &&
-    call ${PERL_SHELL} &&
-    call ${MINGW_SHELL} &&
-    set path &&
-    set CFLAGS=-g &&
-    set LDFLAGS=-Wl,--as-needed -static-libgcc
-  )
-
-  set(CONFIGURE_ENV_NO_PERL
-    cd ${MINGW_PATH} &&
-    call ${MINGW_SHELL} &&
-    set path &&
-    set CFLAGS=-g &&
-    set LDFLAGS=-Wl,--as-needed -static-libgcc
-  )
-
-  set(CONFIGURE_COMMAND sh ./configure)
-  set(CONFIGURE_COMMAND_NO_TARGET ${CONFIGURE_COMMAND})
-else()
-  set(PATCH_CMD patch)
-  set(LIBEXT ".a")
-  set(LIBPREFIX "lib")
-
-  if(APPLE)
-    # Let's get the current Xcode dir, to support xcode-select
-    execute_process(
-      COMMAND xcode-select --print-path
-      OUTPUT_VARIABLE XCODE_DEV_PATH OUTPUT_STRIP_TRAILING_WHITESPACE
-    )
-    execute_process(
-      COMMAND xcodebuild -version -sdk macosx SDKVersion
-      OUTPUT_VARIABLE MACOSX_SDK_VERSION OUTPUT_STRIP_TRAILING_WHITESPACE)
-
-    if(NOT CMAKE_OSX_ARCHITECTURES)
-      execute_process(COMMAND uname -m OUTPUT_VARIABLE ARCHITECTURE OUTPUT_STRIP_TRAILING_WHITESPACE)
-      message(STATUS "Detected native architecture ${ARCHITECTURE}.")
-      set(CMAKE_OSX_ARCHITECTURES "${ARCHITECTURE}")
-    endif()
-    if("${CMAKE_OSX_ARCHITECTURES}" STREQUAL "x86_64")
-      set(OSX_DEPLOYMENT_TARGET 10.13)
-    else()
-      set(OSX_DEPLOYMENT_TARGET 11.00)
-    endif()
-    set(OSX_SYSROOT ${XCODE_DEV_PATH}/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk)
-
-    if("${CMAKE_OSX_ARCHITECTURES}" STREQUAL "arm64")
-      set(BLENDER_PLATFORM_ARM ON)
-    endif()
-
-    set(PLATFORM_CFLAGS "-isysroot ${OSX_SYSROOT} -mmacosx-version-min=${OSX_DEPLOYMENT_TARGET} -arch ${CMAKE_OSX_ARCHITECTURES}")
-    set(PLATFORM_CXXFLAGS "-isysroot ${OSX_SYSROOT} -mmacosx-version-min=${OSX_DEPLOYMENT_TARGET} -std=c++11 -stdlib=libc++ -arch ${CMAKE_OSX_ARCHITECTURES}")
-    set(PLATFORM_LDFLAGS "-isysroot ${OSX_SYSROOT} -mmacosx-version-min=${OSX_DEPLOYMENT_TARGET} -arch ${CMAKE_OSX_ARCHITECTURES}")
-    if("${CMAKE_OSX_ARCHITECTURES}" STREQUAL "x86_64")
-      set(PLATFORM_BUILD_TARGET --build=x86_64-apple-darwin17.0.0) # OS X 10.13
-    else()
-      set(PLATFORM_BUILD_TARGET --build=aarch64-apple-darwin20.0.0) # macOS 11.00
-    endif()
-    set(PLATFORM_CMAKE_FLAGS
-      -DCMAKE_OSX_ARCHITECTURES:STRING=${CMAKE_OSX_ARCHITECTURES}
-      -DCMAKE_OSX_DEPLOYMENT_TARGET:STRING=${OSX_DEPLOYMENT_TARGET}
-      -DCMAKE_OSX_SYSROOT:PATH=${OSX_SYSROOT}
-    )
-  else()
-    if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "aarch64")
-      set(BLENDER_PLATFORM_ARM ON)
-    endif()
-
-    set(PLATFORM_CFLAGS "-fPIC")
-    set(PLATFORM_CXXFLAGS "-std=c++11 -fPIC")
-    set(PLATFORM_LDFLAGS)
-    set(PLATFORM_BUILD_TARGET)
-    set(PLATFORM_CMAKE_FLAGS -DCMAKE_INSTALL_LIBDIR=lib)
-  endif()
-
-  if(WITH_OPTIMIZED_DEBUG)
-    set(BLENDER_CMAKE_C_FLAGS_DEBUG "-O2 -DNDEBUG ${PLATFORM_CFLAGS}")
-  else()
-    set(BLENDER_CMAKE_C_FLAGS_DEBUG "-g ${PLATFORM_CFLAGS}")
-  endif()
-  set(BLENDER_CMAKE_C_FLAGS_MINSIZEREL "-Os -DNDEBUG ${PLATFORM_CFLAGS}")
-  set(BLENDER_CMAKE_C_FLAGS_RELEASE "-O2 -DNDEBUG ${PLATFORM_CFLAGS}")
-  set(BLENDER_CMAKE_C_FLAGS_RELWITHDEBINFO "-O2 -g -DNDEBUG ${PLATFORM_CFLAGS}")
-
-  if(WITH_OPTIMIZED_DEBUG)
-    set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "-O2 -DNDEBUG ${PLATFORM_CXXFLAGS}")
-  else()
-    set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "-g ${PLATFORM_CXXFLAGS}")
-  endif()
-
-  set(BLENDER_CMAKE_CXX_FLAGS_MINSIZEREL "-Os -DNDEBUG ${PLATFORM_CXXFLAGS}")
-  set(BLENDER_CMAKE_CXX_FLAGS_RELEASE "-O2 -DNDEBUG ${PLATFORM_CXXFLAGS}")
-  set(BLENDER_CMAKE_CXX_FLAGS_RELWITHDEBINFO "-O2 -g -DNDEBUG ${PLATFORM_CXXFLAGS}")
-
-  set(CONFIGURE_ENV
-    export MACOSX_DEPLOYMENT_TARGET=${OSX_DEPLOYMENT_TARGET} &&
-    export MACOSX_SDK_VERSION=${OSX_DEPLOYMENT_TARGET} &&
-    export CFLAGS=${PLATFORM_CFLAGS} &&
-    export CXXFLAGS=${PLATFORM_CXXFLAGS} &&
-    export LDFLAGS=${PLATFORM_LDFLAGS}
-  )
-  set(CONFIGURE_ENV_NO_PERL ${CONFIGURE_ENV})
-  set(CONFIGURE_COMMAND ./configure ${PLATFORM_BUILD_TARGET})
-  set(CONFIGURE_COMMAND_NO_TARGET ./configure)
-endif()
-
-set(DEFAULT_CMAKE_FLAGS
-  -DCMAKE_BUILD_TYPE=${BUILD_MODE}
-  -DCMAKE_C_FLAGS_DEBUG=${BLENDER_CMAKE_C_FLAGS_DEBUG}
-  -DCMAKE_C_FLAGS_MINSIZEREL=${BLENDER_CMAKE_C_FLAGS_MINSIZEREL}
-  -DCMAKE_C_FLAGS_RELEASE=${BLENDER_CMAKE_C_FLAGS_RELEASE}
-  -DCMAKE_C_FLAGS_RELWITHDEBINFO=${BLENDER_CMAKE_C_FLAGS_RELWITHDEBINFO}
-  -DCMAKE_CXX_FLAGS_DEBUG=${BLENDER_CMAKE_CXX_FLAGS_DEBUG}
-  -DCMAKE_CXX_FLAGS_MINSIZEREL=${BLENDER_CMAKE_CXX_FLAGS_MINSIZEREL}
-  -DCMAKE_CXX_FLAGS_RELEASE=${BLENDER_CMAKE_CXX_FLAGS_RELEASE}
-  -DCMAKE_CXX_FLAGS_RELWITHDEBINFO=${CMAKE_CXX_FLAGS_RELWITHDEBINFO}
-  ${PLATFORM_CMAKE_FLAGS}
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Debug)
-    set(ZLIB_LIBRARY zlibstaticd${LIBEXT})
-  else()
-    set(ZLIB_LIBRARY zlibstatic${LIBEXT})
-  endif()
-else()
-  set(ZLIB_LIBRARY libz${LIBEXT})
-endif()
-
-if(MSVC)
-  set_property(GLOBAL PROPERTY USE_FOLDERS ON)
-endif()
-
-set(CMAKE_INSTALL_MESSAGE LAZY)

build_files/build_environment/cmake/opus.cmake

@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_opus
-  URL file://${PACKAGE_DIR}/${OPUS_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${OPUS_HASH_TYPE}=${OPUS_HASH}
-  PREFIX ${BUILD_DIR}/opus
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/opus/src/external_opus/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/opus
-    --disable-shared
-    --enable-static
-    --with-pic
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/opus/src/external_opus/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/opus/src/external_opus/ && make install
-  INSTALL_DIR ${LIBDIR}/opus
-)
-
-if(MSVC)
-  set_target_properties(external_opus PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/osl.cmake

@@ -1,105 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WIN32)
-  set(OSL_CMAKE_CXX_STANDARD_LIBRARIES "kernel32${LIBEXT} user32${LIBEXT} gdi32${LIBEXT} winspool${LIBEXT} shell32${LIBEXT} ole32${LIBEXT} oleaut32${LIBEXT} uuid${LIBEXT} comdlg32${LIBEXT} advapi32${LIBEXT} psapi${LIBEXT}")
-  set(OSL_FLEX_BISON -DFLEX_EXECUTABLE=${LIBDIR}/flexbison/win_flex.exe -DBISON_EXECUTABLE=${LIBDIR}/flexbison/win_bison.exe)
-  set(OSL_SIMD_FLAGS -DOIIO_NOSIMD=1 -DOIIO_SIMD=sse2)
-else()
-  set(OSL_CMAKE_CXX_STANDARD_LIBRARIES)
-  set(OSL_FLEX_BISON)
-  set(OSL_OPENIMAGEIO_LIBRARY "${LIBDIR}/openimageio/lib/${LIBPREFIX}OpenImageIO${LIBEXT};${LIBDIR}/openimageio/lib/${LIBPREFIX}OpenImageIO_Util${LIBEXT};${LIBDIR}/png/lib/${LIBPREFIX}png16${LIBEXT};${LIBDIR}/jpg/lib/${LIBPREFIX}jpeg${LIBEXT};${LIBDIR}/tiff/lib/${LIBPREFIX}tiff${LIBEXT};${LIBDIR}/openexr/lib/${LIBPREFIX}IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}")
-endif()
-
-set(OSL_ILMBASE_CUSTOM_LIBRARIES "${LIBDIR}/openexr/lib/Imath${OPENEXR_VERSION_POSTFIX}.lib^^${LIBDIR}/openexr/lib/Half{OPENEXR_VERSION_POSTFIX}.lib^^${LIBDIR}/openexr/lib/IlmThread${OPENEXR_VERSION_POSTFIX}.lib^^${LIBDIR}/openexr/lib/Iex${OPENEXR_VERSION_POSTFIX}.lib")
-
-set(OSL_EXTRA_ARGS
-  -DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-  -DBoost_USE_MULTITHREADED=ON
-  -DBoost_USE_STATIC_LIBS=ON
-  -DBoost_USE_STATIC_RUNTIME=OFF
-  -DBOOST_ROOT=${LIBDIR}/boost
-  -DBOOST_LIBRARYDIR=${LIBDIR}/boost/lib/
-  -DBoost_NO_SYSTEM_PATHS=ON
-  -DBoost_NO_BOOST_CMAKE=ON
-  -DOpenEXR_ROOT=${LIBDIR}/openexr/
-  -DIlmBase_ROOT=${LIBDIR}/openexr/
-  -DILMBASE_INCLUDE_DIR=${LIBDIR}/openexr/include/
-  -DOPENEXR_HALF_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}Half${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_IMATH_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}Imath${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_ILMTHREAD_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmThread${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_IEX_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}Iex${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DOPENEXR_INCLUDE_DIR=${LIBDIR}/openexr/include/
-  -DOPENEXR_ILMIMF_LIBRARY=${LIBDIR}/openexr/lib/${LIBPREFIX}IlmImf${OPENEXR_VERSION_POSTFIX}${LIBEXT}
-  -DOpenImageIO_ROOT=${LIBDIR}/openimageio/
-  -DOSL_BUILD_TESTS=OFF
-  -DOSL_BUILD_MATERIALX=OFF
-  -DPNG_ROOT=${LIBDIR}/png
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-  ${OSL_FLEX_BISON}
-  -DCMAKE_CXX_STANDARD_LIBRARIES=${OSL_CMAKE_CXX_STANDARD_LIBRARIES}
-  -DBUILD_SHARED_LIBS=OFF
-  -DLINKSTATIC=ON
-  -DOSL_BUILD_PLUGINS=OFF
-  -DSTOP_ON_WARNING=OFF
-  -DUSE_LLVM_BITCODE=OFF
-  -DLLVM_ROOT=${LIBDIR}/llvm/
-  -DLLVM_DIRECTORY=${LIBDIR}/llvm/
-  -DUSE_PARTIO=OFF
-  -DUSE_QT=OFF
-  -DUSE_Qt5=OFF
-  -DINSTALL_DOCS=OFF
-  ${OSL_SIMD_FLAGS}
-  -Dpugixml_ROOT=${LIBDIR}/pugixml
-  -DUSE_PYTHON=OFF
-  -DCMAKE_CXX_STANDARD=14
-)
-
-ExternalProject_Add(external_osl
-  URL file://${PACKAGE_DIR}/${OSL_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  LIST_SEPARATOR ^^
-  URL_HASH ${OSL_HASH_TYPE}=${OSL_HASH}
-  PREFIX ${BUILD_DIR}/osl
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/osl/src/external_osl < ${PATCH_DIR}/osl.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/osl -DCMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE} ${DEFAULT_CMAKE_FLAGS} ${OSL_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/osl
-)
-
-add_dependencies(
-  external_osl
-  external_boost
-  ll
-  external_openexr
-  external_zlib
-  external_openimageio
-  external_pugixml
-)
-if(WIN32)
-  add_dependencies(
-    external_osl
-    external_flexbison
-  )
-elseif(UNIX AND NOT APPLE)
-  add_dependencies(
-    external_osl
-    external_flex
-  )
-endif()
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_osl after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/osl/ ${HARVEST_TARGET}/osl
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_osl after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/osl/lib/oslcomp.lib ${HARVEST_TARGET}/osl/lib/oslcomp_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/osl/lib/oslexec.lib ${HARVEST_TARGET}/osl/lib/oslexec_d.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/osl/lib/oslquery.lib ${HARVEST_TARGET}/osl/lib/oslquery_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/package_python.cmake

@@ -1,44 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(MSVC)
-  set(PYTARGET ${HARVEST_TARGET}/python/${PYTHON_SHORT_VERSION_NO_DOTS})
-  set(PYSRC ${LIBDIR}/python/)
-
-  if(BUILD_MODE STREQUAL Release)
-    add_custom_command(
-      OUTPUT ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe
-      COMMAND echo packaging python
-      COMMAND echo this should output at ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe
-      COMMAND ${CMAKE_COMMAND} -E make_directory ${PYTARGET}/libs
-      COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}.lib ${PYTARGET}/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/python.exe ${PYTARGET}/bin/python.exe
-      COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/python${PYTHON_SHORT_VERSION_NO_DOTS}.dll ${PYTARGET}/bin/python${PYTHON_SHORT_VERSION_NO_DOTS}.dll
-      COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/python3${PYTHON_POSTFIX}.dll ${PYTARGET}/bin/python3${PYTHON_POSTFIX}.dll
-      COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/python${PYTHON_SHORT_VERSION_NO_DOTS}.pdb ${PYTARGET}/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}.pdb
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${PYSRC}/include/ ${PYTARGET}/include/
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${PYSRC}/lib/ ${PYTARGET}/lib/
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${PYSRC}/DLLs/ ${PYTARGET}/DLLs/
-      COMMAND cd ${PYTARGET}/lib/ && for /d /r . %%d in (__pycache__) do @if exist "%%d" echo "%%d" && rd /s/q "%%d"
-    )
-    add_custom_target(Package_Python ALL DEPENDS external_python external_numpy external_python_site_packages OUTPUT ${HARVEST_TARGET}/python/${PYTHON_SHORT_VERSION_NO_DOTS}/bin/python${PYTHON_POSTFIX}.exe)
-  endif()
-
-  if(BUILD_MODE STREQUAL Debug)
-    add_custom_command(
-      OUTPUT ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe
-      COMMAND echo packaging python
-      COMMAND echo this should output at ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe
-      COMMAND ${CMAKE_COMMAND} -E make_directory ${PYTARGET}/libs
-      COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.lib ${PYTARGET}/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/python${PYTHON_POSTFIX}.exe ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe
-      COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.dll ${PYTARGET}/bin/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.dll
-      COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/python3${PYTHON_POSTFIX}.dll ${PYTARGET}/bin/python3${PYTHON_POSTFIX}.dll
-      COMMAND ${CMAKE_COMMAND} -E copy ${PYSRC}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.pdb ${PYTARGET}/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.pdb
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${PYSRC}/include/ ${PYTARGET}/include/
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${PYSRC}/lib/ ${PYTARGET}/lib/
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${PYSRC}/DLLs/ ${PYTARGET}/DLLs/
-      COMMAND cd ${PYTARGET}/lib/ && for /d /r . %%d in (__pycache__) do @if exist "%%d" echo "%%d" && rd /s/q "%%d"
-    )
-    add_custom_target(Package_Python ALL DEPENDS external_python external_numpy external_python_site_packages OUTPUT ${PYTARGET}/bin/python${PYTHON_POSTFIX}.exe)
-  endif()
-endif()

build_files/build_environment/cmake/png.cmake

@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(PNG_EXTRA_ARGS
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include/
-  -DPNG_STATIC=ON
-)
-
-if(BLENDER_PLATFORM_ARM)
-  set(PNG_EXTRA_ARGS ${PNG_EXTRA_ARGS} -DPNG_HARDWARE_OPTIMIZATIONS=ON -DPNG_ARM_NEON=on -DCMAKE_SYSTEM_PROCESSOR="aarch64")
-endif()
-
-ExternalProject_Add(external_png
-  URL file://${PACKAGE_DIR}/${PNG_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${PNG_HASH_TYPE}=${PNG_HASH}
-  PREFIX ${BUILD_DIR}/png
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/png ${DEFAULT_CMAKE_FLAGS} ${PNG_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/png
-)
-
-add_dependencies(
-  external_png
-  external_zlib
-)
-
-if(WIN32 AND BUILD_MODE STREQUAL Debug)
-  ExternalProject_Add_Step(external_png after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/png/lib/libpng16_staticd${LIBEXT} ${LIBDIR}/png/lib/libpng16${LIBEXT}
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/potrace.cmake

@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(POTRACE_EXTRA_ARGS
-)
-
-if((WIN32 AND BUILD_MODE STREQUAL Release) OR UNIX)
-  ExternalProject_Add(external_potrace
-    URL file://${PACKAGE_DIR}/${POTRACE_FILE}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH ${POTRACE_HASH_TYPE}=${POTRACE_HASH}
-    PREFIX ${BUILD_DIR}/potrace
-    PATCH_COMMAND ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/cmakelists_potrace.txt ${BUILD_DIR}/potrace/src/external_potrace/CMakeLists.txt
-    CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/potrace ${DEFAULT_CMAKE_FLAGS} ${POTRACE_EXTRA_ARGS}
-    INSTALL_DIR ${LIBDIR}/potrace
-  )
-  if(WIN32)
-    ExternalProject_Add_Step(external_potrace after_install
-        COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/potrace ${HARVEST_TARGET}/potrace
-        DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/pthreads.cmake

@@ -1,38 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WIN32)
-
-    if(MSVC14) # vs2015 has timespec
-      set(PTHREAD_CPPFLAGS "/I. /DHAVE_CONFIG_H /D_TIMESPEC_DEFINED ")
-    else() # everything before doesn't
-      set(PTHREAD_CPPFLAGS "/I. /DHAVE_CONFIG_H ")
-    endif()
-
-    set(PTHREADS_BUILD cd ${BUILD_DIR}/pthreads/src/external_pthreads/ && cd && nmake VC-static /e CPPFLAGS=${PTHREAD_CPPFLAGS})
-
-    ExternalProject_Add(external_pthreads
-      URL file://${PACKAGE_DIR}/${PTHREADS_FILE}
-      DOWNLOAD_DIR ${DOWNLOAD_DIR}
-      URL_HASH ${PTHREADS_HASH_TYPE}=${PTHREADS_HASH}
-      PREFIX ${BUILD_DIR}/pthreads
-      CONFIGURE_COMMAND echo .
-      PATCH_COMMAND COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/pthreads/src/external_pthreads < ${PATCH_DIR}/pthreads.diff
-      BUILD_COMMAND ${PTHREADS_BUILD}
-      INSTALL_COMMAND COMMAND
-        ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/pthreads/src/external_pthreads/libpthreadVC3${LIBEXT} ${LIBDIR}/pthreads/lib/pthreadVC3${LIBEXT} &&
-        ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/pthreads/src/external_pthreads/pthread.h ${LIBDIR}/pthreads/inc/pthread.h &&
-        ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/pthreads/src/external_pthreads/sched.h ${LIBDIR}/pthreads/inc/sched.h &&
-        ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/pthreads/src/external_pthreads/semaphore.h ${LIBDIR}/pthreads/inc/semaphore.h &&
-        ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/pthreads/src/external_pthreads/_ptw32.h ${LIBDIR}/pthreads/inc/_ptw32.h
-      INSTALL_DIR ${LIBDIR}/pthreads
-    )
-
-    if(BUILD_MODE STREQUAL Release)
-      ExternalProject_Add_Step(external_pthreads after_install
-        COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/pthreads/inc/ ${HARVEST_TARGET}/pthreads/include/
-        COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/pthreads/lib/ ${HARVEST_TARGET}/pthreads/lib
-        DEPENDEES install
-      )
-    endif()
-
-endif()

build_files/build_environment/cmake/pugixml.cmake

@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(PUGIXML_EXTRA_ARGS
-)
-
-ExternalProject_Add(external_pugixml
-  URL file://${PACKAGE_DIR}/${PUGIXML_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${PUGIXML_HASH_TYPE}=${PUGIXML_HASH}
-  PREFIX ${BUILD_DIR}/pugixml
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/pugixml ${DEFAULT_CMAKE_FLAGS} ${PUGIXML_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/pugixml
-)
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_pugixml after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/pugixml ${HARVEST_TARGET}/pugixml
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_pugixml after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/pugixml/lib/pugixml.lib ${HARVEST_TARGET}/pugixml/lib/pugixml_d.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/python.cmake

@@ -1,98 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(PYTHON_POSTFIX)
-if(BUILD_MODE STREQUAL Debug)
-  set(PYTHON_POSTFIX _d)
-  set(PYTHON_EXTRA_INSTLAL_FLAGS -d)
-endif()
-
-if(WIN32)
-  set(PYTHON_BINARY_INTERNAL ${BUILD_DIR}/python/src/external_python/PCBuild/amd64/python${PYTHON_POSTFIX}.exe)
-  set(PYTHON_BINARY ${LIBDIR}/python/python${PYTHON_POSTFIX}.exe)
-  set(PYTHON_SRC ${BUILD_DIR}/python/src/external_python/)
-  macro(cmake_to_dos_path MsysPath ResultingPath)
-    string(REPLACE "/" "\\" ${ResultingPath} "${MsysPath}")
-  endmacro()
-
-  set(PYTHON_EXTERNALS_FOLDER ${BUILD_DIR}/python/src/external_python/externals)
-  set(DOWNLOADS_EXTERNALS_FOLDER ${DOWNLOAD_DIR}/externals)
-
-  cmake_to_dos_path(${PYTHON_EXTERNALS_FOLDER} PYTHON_EXTERNALS_FOLDER_DOS)
-  cmake_to_dos_path(${DOWNLOADS_EXTERNALS_FOLDER} DOWNLOADS_EXTERNALS_FOLDER_DOS)
-
-  ExternalProject_Add(external_python
-    URL file://${PACKAGE_DIR}/${PYTHON_FILE}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH ${PYTHON_HASH_TYPE}=${PYTHON_HASH}
-    PREFIX ${BUILD_DIR}/python
-    CONFIGURE_COMMAND ""
-    BUILD_COMMAND cd ${BUILD_DIR}/python/src/external_python/pcbuild/ && set IncludeTkinter=false && call build.bat -e -p x64 -c ${BUILD_MODE}
-    INSTALL_COMMAND ${PYTHON_BINARY_INTERNAL} ${PYTHON_SRC}/PC/layout/main.py -b ${PYTHON_SRC}/PCbuild/amd64 -s ${PYTHON_SRC} -t ${PYTHON_SRC}/tmp/ --include-stable --include-pip --include-dev --include-launchers  --include-venv --include-symbols ${PYTHON_EXTRA_INSTLAL_FLAGS} --copy ${LIBDIR}/python
-  )
-
-else()
-  if(APPLE)
-    # Disable functions that can be in 10.13 sdk but aren't available on 10.9 target.
-    #
-    # Disable libintl (gettext library) as it might come from Homebrew, which makes
-    # it so test program compiles, but the Python does not. This is because for Python
-    # we use isysroot, which seems to forbid using libintl.h.
-    # The gettext functionality seems to come from CoreFoundation, so should be all fine.
-    set(PYTHON_FUNC_CONFIGS
-      export ac_cv_func_futimens=no &&
-      export ac_cv_func_utimensat=no &&
-      export ac_cv_func_basename_r=no &&
-      export ac_cv_func_clock_getres=no &&
-      export ac_cv_func_clock_gettime=no &&
-      export ac_cv_func_clock_settime=no &&
-      export ac_cv_func_dirname_r=no &&
-      export ac_cv_func_getentropy=no &&
-      export ac_cv_func_mkostemp=no &&
-      export ac_cv_func_mkostemps=no &&
-      export ac_cv_func_timingsafe_bcmp=no &&
-      export ac_cv_header_libintl_h=no &&
-      export ac_cv_lib_intl_textdomain=no
-    )
-    if("${CMAKE_OSX_ARCHITECTURES}" STREQUAL "arm64")
-      set(PYTHON_FUNC_CONFIGS ${PYTHON_FUNC_CONFIGS} && export PYTHON_DECIMAL_WITH_MACHINE=ansi64)
-    endif()
-    set(PYTHON_CONFIGURE_ENV ${CONFIGURE_ENV} && ${PYTHON_FUNC_CONFIGS})
-    set(PYTHON_BINARY ${BUILD_DIR}/python/src/external_python/python.exe)
-  else()
-    set(PYTHON_CONFIGURE_ENV ${CONFIGURE_ENV})
-    set(PYTHON_BINARY ${BUILD_DIR}/python/src/external_python/python)
-  endif()
-  # Link against zlib statically (Unix). Avoid rpath issues (macOS).
-  set(PYTHON_PATCH ${PATCH_CMD} --verbose -p1 -d ${BUILD_DIR}/python/src/external_python < ${PATCH_DIR}/python_unix.diff)
-  set(PYTHON_CONFIGURE_EXTRA_ARGS "--with-openssl=${LIBDIR}/ssl")
-  set(PYTHON_CFLAGS "-I${LIBDIR}/sqlite/include -I${LIBDIR}/bzip2/include -I${LIBDIR}/lzma/include -I${LIBDIR}/zlib/include ${PLATFORM_CFLAGS}")
-  set(PYTHON_LDFLAGS "-L${LIBDIR}/ffi/lib -L${LIBDIR}/sqlite/lib -L${LIBDIR}/bzip2/lib -L${LIBDIR}/lzma/lib -L${LIBDIR}/zlib/lib ${PLATFORM_LDFLAGS}")
-  set(PYTHON_CONFIGURE_EXTRA_ENV
-    export CFLAGS=${PYTHON_CFLAGS} &&
-    export CPPFLAGS=${PYTHON_CFLAGS} &&
-    export LDFLAGS=${PYTHON_LDFLAGS} &&
-    export PKG_CONFIG_PATH=${LIBDIR}/ffi/lib/pkgconfig)
-
-  ExternalProject_Add(external_python
-    URL file://${PACKAGE_DIR}/${PYTHON_FILE}
-    DOWNLOAD_DIR ${DOWNLOAD_DIR}
-    URL_HASH ${PYTHON_HASH_TYPE}=${PYTHON_HASH}
-    PREFIX ${BUILD_DIR}/python
-    PATCH_COMMAND ${PYTHON_PATCH}
-    CONFIGURE_COMMAND ${PYTHON_CONFIGURE_ENV} && ${PYTHON_CONFIGURE_EXTRA_ENV} && cd ${BUILD_DIR}/python/src/external_python/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/python ${PYTHON_CONFIGURE_EXTRA_ARGS}
-    BUILD_COMMAND ${PYTHON_CONFIGURE_ENV} && cd ${BUILD_DIR}/python/src/external_python/ && make -j${MAKE_THREADS}
-    INSTALL_COMMAND ${PYTHON_CONFIGURE_ENV} && cd ${BUILD_DIR}/python/src/external_python/ && make install
-    INSTALL_DIR ${LIBDIR}/python)
-endif()
-
-if(UNIX)
-  add_dependencies(
-    external_python
-    external_bzip2
-    external_ffi
-    external_lzma
-    external_ssl
-    external_sqlite
-    external_zlib
-  )
-endif()

build_files/build_environment/cmake/python.map

@@ -1,9 +0,0 @@
-{
-global:
-    Py*;
-    _Py*;
-    _py*;
-local:
-    *;
-};
-

build_files/build_environment/cmake/python_site_packages.cmake

@@ -1,33 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WIN32 AND BUILD_MODE STREQUAL Debug)
-  set(SITE_PACKAGES_EXTRA --global-option build --global-option --debug)
-  # zstandard is determined to build and link release mode libs in a debug
-  # configuration, the only way to make it happy is to bend to its will
-  # and give it a library to link with.
-  set(PIP_CONFIGURE_COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/python/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}_d.lib ${LIBDIR}/python/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}.lib)
-else()
-  set(PIP_CONFIGURE_COMMAND echo ".")
-endif()
-
-ExternalProject_Add(external_python_site_packages
-  DOWNLOAD_COMMAND ""
-  CONFIGURE_COMMAND ${PIP_CONFIGURE_COMMAND}
-  BUILD_COMMAND ""
-  PREFIX ${BUILD_DIR}/site_packages
-  INSTALL_COMMAND ${PYTHON_BINARY} -m pip install --no-cache-dir ${SITE_PACKAGES_EXTRA} cython==${CYTHON_VERSION} idna==${IDNA_VERSION} charset-normalizer==${CHARSET_NORMALIZER_VERSION} urllib3==${URLLIB3_VERSION} certifi==${CERTIFI_VERSION} requests==${REQUESTS_VERSION} zstandard==${ZSTANDARD_VERSION} --no-binary :all:
-)
-
-if(USE_PIP_NUMPY)
-  # Use only wheel (and not build from source) to stop NumPy from linking against buggy
-  # Accelerate framework backend on macOS. Official wheels are built with OpenBLAS.
-  ExternalProject_Add_Step(external_python_site_packages after_install
-    COMMAND ${PYTHON_BINARY} -m pip install --no-cache-dir numpy==${NUMPY_VERSION} --only-binary :all:
-    DEPENDEES install
-  )
-endif()
-
-add_dependencies(
-  external_python_site_packages
-  external_python
-)

build_files/build_environment/cmake/sdl.cmake

@@ -1,33 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WIN32)
-  set(SDL_EXTRA_ARGS
-    -DSDL_STATIC=Off
-  )
-else()
-  set(SDL_EXTRA_ARGS
-    -DSDL_STATIC=ON
-    -DSDL_SHARED=OFF
-    -DSDL_VIDEO=OFF
-    -DSNDIO=OFF
-  )
-endif()
-
-ExternalProject_Add(external_sdl
-  URL file://${PACKAGE_DIR}/${SDL_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${SDL_HASH_TYPE}=${SDL_HASH}
-  PREFIX ${BUILD_DIR}/sdl
-  PATCH_COMMAND ${PATCH_CMD} -p 0 -N -d ${BUILD_DIR}/sdl/src/external_sdl < ${PATCH_DIR}/sdl.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/sdl ${DEFAULT_CMAKE_FLAGS} ${SDL_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/sdl
-)
-
-if(BUILD_MODE STREQUAL Release AND WIN32)
-  ExternalProject_Add_Step(external_sdl after_install
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/sdl/include/sdl2 ${HARVEST_TARGET}/sdl/include
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/sdl/lib ${HARVEST_TARGET}/sdl/lib
-    COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/sdl/bin ${HARVEST_TARGET}/sdl/lib
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/setup_mingw64.cmake

@@ -1,219 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-####################################################################################################################
-# Mingw64 Builds
-####################################################################################################################
-# This installs mingw64+msys to compile ffmpeg/iconv/libsndfile/fftw3
-####################################################################################################################
-
-message("LIBDIR = ${LIBDIR}")
-macro(cmake_to_msys_path MsysPath ResultingPath)
-  string(REPLACE ":" "" TmpPath "${MsysPath}")
-  string(SUBSTRING ${TmpPath} 0 1 Drive)
-  string(SUBSTRING ${TmpPath} 1 255 PathPart)
-  string(TOLOWER ${Drive} LowerDrive)
-  string(CONCAT ${ResultingPath} "/" ${LowerDrive} ${PathPart})
-endmacro()
-cmake_to_msys_path(${LIBDIR} mingw_LIBDIR)
-message("mingw_LIBDIR = ${mingw_LIBDIR}")
-
-message("Checking for mingw64")
-# download ming64
-if(NOT EXISTS "${DOWNLOAD_DIR}/x86_64-4.9.4-release-win32-seh-rt_v5-rev0.7z")
-  message("Downloading mingw64")
-  file(DOWNLOAD "https://nchc.dl.sourceforge.net/project/mingw-w64/Toolchains%20targetting%20Win64/Personal%20Builds/mingw-builds/4.9.4/threads-win32/seh/x86_64-4.9.4-release-win32-seh-rt_v5-rev0.7z" "${DOWNLOAD_DIR}/x86_64-4.9.4-release-win32-seh-rt_v5-rev0.7z")
-endif()
-
-# make mingw root directory
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${DOWNLOAD_DIR}/mingw
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}
-  )
-endif()
-
-# extract mingw64
-if((NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/ming64sh.cmd") AND (EXISTS "${DOWNLOAD_DIR}/x86_64-4.9.4-release-win32-seh-rt_v5-rev0.7z"))
-  message("Extracting mingw64")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf ${DOWNLOAD_DIR}/x86_64-4.9.4-release-win32-seh-rt_v5-rev0.7z
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/mingw
-  )
-endif()
-
-message("Checking for pkg-config")
-if(NOT EXISTS "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1_bin-win32.zip")
-  message("Downloading pkg-config")
-  file(DOWNLOAD "https://nchc.dl.sourceforge.net/project/pkgconfiglite/0.28-1/pkg-config-lite-0.28-1_bin-win32.zip" "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1_bin-win32.zip")
-endif()
-
-# extract pkgconfig
-if((NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/pkg-config.exe") AND (EXISTS "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1_bin-win32.zip"))
-  message("Extracting pkg-config")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1_bin-win32.zip"
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/
-  )
-
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/pkg-config-lite-0.28-1/bin/pkg-config.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/pkg-config.exe"
-  )
-
-endif()
-
-message("Checking for nasm")
-if(NOT EXISTS "${DOWNLOAD_DIR}/nasm-2.13.02-win64.zip")
-  message("Downloading nasm")
-  file(DOWNLOAD "http://www.nasm.us/pub/nasm/releasebuilds/2.13.02/win64/nasm-2.13.02-win64.zip" "${DOWNLOAD_DIR}/nasm-2.13.02-win64.zip")
-endif()
-
-# extract nasm
-if((NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/nasm.exe") AND (EXISTS "${DOWNLOAD_DIR}/nasm-2.13.02-win64.zip"))
-  message("Extracting nasm")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf "${DOWNLOAD_DIR}/nasm-2.13.02-win64.zip"
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/
-  )
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/nasm-2.13.02/nasm.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/nasm.exe"
-  )
-
-endif()
-SET(NASM_PATH ${DOWNLOAD_DIR}/mingw/mingw64/bin/nasm.exe)
-
-message("Checking for mingwGet")
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip")
-  message("Downloading mingw-get")
-  file(DOWNLOAD "https://nchc.dl.sourceforge.net/project/mingw/Installer/mingw-get/mingw-get-0.6.2-beta-20131004-1/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip" "${DOWNLOAD_DIR}/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip")
-endif()
-
-# extract mingw_get
-if((NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/mingw-get.exe") AND (EXISTS "${DOWNLOAD_DIR}/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip"))
-  message("Extracting mingw-get")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf "${DOWNLOAD_DIR}/mingw-get-0.6.2-mingw32-beta-20131004-1-bin.zip"
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/mingw/mingw64/
-  )
-endif()
-
-if((EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/mingw-get.exe") AND (NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/msys/1.0/bin/make.exe"))
-  message("Installing MSYS")
-  execute_process(
-    COMMAND ${DOWNLOAD_DIR}/mingw/mingw64/bin/mingw-get install msys msys-patch
-    WORKING_DIRECTORY  ${DOWNLOAD_DIR}/mingw/mingw64/bin/
-  )
-endif()
-
-if((EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/mingw-get.exe") AND (NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/msys/1.0/bin/mktemp.exe"))
-  message("Installing mktemp")
-  execute_process(
-    COMMAND ${DOWNLOAD_DIR}/mingw/mingw64/bin/mingw-get install msys msys-mktemp
-    WORKING_DIRECTORY  ${DOWNLOAD_DIR}/mingw/mingw64/bin/
-  )
-endif()
-
-if((EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/mingw-get.exe") AND (NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/msys/1.0/bin/m4.exe"))
-  message("Installing m4")
-  execute_process(
-    COMMAND ${DOWNLOAD_DIR}/mingw/mingw64/bin/mingw-get install msys msys-m4
-    WORKING_DIRECTORY  ${DOWNLOAD_DIR}/mingw/mingw64/bin/
-  )
-endif()
-
-message("Checking for CoreUtils")
-# download old core_utils for pr.exe (ffmpeg needs it to build)
-if(NOT EXISTS "${DOWNLOAD_DIR}/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2")
-  message("Downloading CoreUtils 5.97")
-  file(DOWNLOAD "https://nchc.dl.sourceforge.net/project/mingw/MSYS/Base/msys-core/_obsolete/coreutils-5.97-MSYS-1.0.11-2/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2" "${DOWNLOAD_DIR}/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2")
-endif()
-
-if((EXISTS "${DOWNLOAD_DIR}/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2") AND (NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/msys/1.0/bin/pr.exe"))
-  message("Installing pr from CoreUtils 5.97")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${DOWNLOAD_DIR}/tmp_coreutils
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}
-  )
-
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf ${DOWNLOAD_DIR}/coreutils-5.97-MSYS-1.0.11-snapshot.tar.bz2
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/tmp_coreutils/
-  )
-
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy ${DOWNLOAD_DIR}/tmp_coreutils/coreutils-5.97/bin/pr.exe "${DOWNLOAD_DIR}/mingw/mingw64/msys/1.0/bin/pr.exe"
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/tmp_coreutils/
-  )
-endif()
-
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/ming64sh.cmd")
-  message("Installing ming64sh.cmd")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/ming64sh.cmd  ${DOWNLOAD_DIR}/mingw/mingw64/ming64sh.cmd
-  )
-endif()
-
-message("Checking for perl")
-# download perl for libvpx
-if(NOT EXISTS "${DOWNLOAD_DIR}/strawberry-perl-5.22.1.3-64bit-portable.zip")
-  message("Downloading perl")
-  file(DOWNLOAD "http://strawberryperl.com/download/5.22.1.3/strawberry-perl-5.22.1.3-64bit-portable.zip" "${DOWNLOAD_DIR}/strawberry-perl-5.22.1.3-64bit-portable.zip")
-endif()
-
-# make perl root directory
-if(NOT EXISTS "${DOWNLOAD_DIR}/perl")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${DOWNLOAD_DIR}/perl
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}
-  )
-endif()
-
-# extract perl
-if((NOT EXISTS "${DOWNLOAD_DIR}/perl/portable.perl") AND (EXISTS "${DOWNLOAD_DIR}/strawberry-perl-5.22.1.3-64bit-portable.zip"))
-  message("Extracting perl")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E tar jxf ${DOWNLOAD_DIR}/strawberry-perl-5.22.1.3-64bit-portable.zip
-    WORKING_DIRECTORY ${DOWNLOAD_DIR}/perl
-  )
-endif()
-
-# get yasm for vpx
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/yasm.exe")
-  message("Downloading yasm")
-  file(DOWNLOAD "http://www.tortall.net/projects/yasm/releases/yasm-1.3.0-win64.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/yasm.exe")
-endif()
-
-message("checking x86_64-w64-mingw32-strings.exe")
-# copy strings.exe to x86_64-w64-mingw32-strings.exe for x264
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-strings.exe")
-  message("fixing x86_64-w64-mingw32-strings.exe")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/mingw/mingw64/bin/strings.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-strings.exe"
-  )
-endif()
-
-message("checking x86_64-w64-mingw32-ar.exe")
-# copy ar.exe to x86_64-w64-mingw32-ar.exe for x264
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-ar.exe")
-  message("fixing x86_64-w64-mingw32-ar.exe")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/mingw/mingw64/bin/ar.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-ar.exe"
-  )
-endif()
-
-message("checking x86_64-w64-mingw32-strip.exe")
-# copy strip.exe to x86_64-w64-mingw32-strip.exe for x264
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-strip.exe")
-  message("fixing x86_64-w64-mingw32-strip.exe")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/mingw/mingw64/bin/strip.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-strip.exe"
-  )
-endif()
-
-message("checking x86_64-w64-mingw32-ranlib.exe")
-# copy ranlib.exe to x86_64-w64-mingw32-ranlib.exe for x264
-if(NOT EXISTS "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-ranlib.exe")
-  message("fixing x86_64-w64-mingw32-ranlib.exe")
-  execute_process(
-    COMMAND ${CMAKE_COMMAND} -E copy "${DOWNLOAD_DIR}/mingw/mingw64/bin/ranlib.exe" "${DOWNLOAD_DIR}/mingw/mingw64/bin/x86_64-w64-mingw32-ranlib.exe"
-  )
-endif()

build_files/build_environment/cmake/sndfile.cmake

@@ -1,57 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(SNDFILE_EXTRA_ARGS)
-set(SNDFILE_ENV PKG_CONFIG_PATH=${mingw_LIBDIR}/ogg/lib/pkgconfig:${mingw_LIBDIR}/vorbis/lib/pkgconfig:${mingw_LIBDIR}/flac/lib/pkgconfig:${mingw_LIBDIR})
-
-if(WIN32)
-  set(SNDFILE_ENV set ${SNDFILE_ENV} &&)
-  # Shared for windows because static libs will drag in a libgcc dependency.
-  set(SNDFILE_OPTIONS --disable-static --enable-shared )
-else()
-  set(SNDFILE_OPTIONS --enable-static --disable-shared )
-endif()
-
-if(UNIX)
-  set(SNDFILE_PATCH_CMD ${PATCH_CMD} --verbose -p 0 -d ${BUILD_DIR}/sndfile/src/external_sndfile < ${PATCH_DIR}/sndfile.diff)
-else()
-  set(SNDFILE_PATCH_CMD)
-endif()
-
-ExternalProject_Add(external_sndfile
-  URL file://${PACKAGE_DIR}/${SNDFILE_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${SNDFILE_HASH_TYPE}=${SNDFILE_HASH}
-  PREFIX ${BUILD_DIR}/sndfile
-  PATCH_COMMAND ${SNDFILE_PATCH_CMD}
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/sndfile/src/external_sndfile/ && ${SNDFILE_ENV} ${CONFIGURE_COMMAND} ${SNDFILE_OPTIONS} --prefix=${mingw_LIBDIR}/sndfile
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/sndfile/src/external_sndfile/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/sndfile/src/external_sndfile/ && make install
-  INSTALL_DIR ${LIBDIR}/sndfile
-)
-
-if(MSVC)
-  set_target_properties(external_sndfile PROPERTIES FOLDER Mingw)
-endif()
-
-add_dependencies(
-  external_sndfile
-  external_ogg
-  external_vorbis
-)
-if(UNIX)
-  add_dependencies(
-    external_sndfile
-    external_flac
-  )
-endif()
-
-if(BUILD_MODE STREQUAL Release AND WIN32)
-  ExternalProject_Add_Step(external_sndfile after_install
-      COMMAND  lib /def:${BUILD_DIR}/sndfile/src/external_sndfile/src/libsndfile-1.def /machine:x64 /out:${BUILD_DIR}/sndfile/src/external_sndfile/src/libsndfile-1.lib
-      COMMAND  ${CMAKE_COMMAND} -E copy ${LIBDIR}/sndfile/bin/libsndfile-1.dll ${HARVEST_TARGET}/sndfile/lib/libsndfile-1.dll
-      COMMAND  ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/sndfile/src/external_sndfile/src/libsndfile-1.lib ${HARVEST_TARGET}/sndfile/lib/libsndfile-1.lib
-      COMMAND  ${CMAKE_COMMAND} -E copy ${LIBDIR}/sndfile/include/sndfile.h ${HARVEST_TARGET}/sndfile/include/sndfile.h
-
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/spnav.cmake

@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_spnav
-  URL file://${PACKAGE_DIR}/${SPNAV_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${SPNAV_HASH_TYPE}=${SPNAV_HASH}
-  PREFIX ${BUILD_DIR}/spnav
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/spnav/src/external_spnav/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/spnav --disable-shared --enable-static --with-pic
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/spnav/src/external_spnav/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/spnav/src/external_spnav/ && make install
-  INSTALL_DIR ${LIBDIR}/spnav
-)

build_files/build_environment/cmake/sqlite.cmake

@@ -1,56 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(SQLITE_CONFIGURE_ENV echo .)
-set(SQLITE_CONFIGURATION_ARGS)
-
-if(UNIX)
-  if(NOT APPLE)
-    set(SQLITE_LDFLAGS -Wl,--as-needed)
-  endif()
-  set(SQLITE_CFLAGS
-    "-DSQLITE_SECURE_DELETE -DSQLITE_ENABLE_COLUMN_METADATA \
-    -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_FTS3_PARENTHESIS \
-    -DSQLITE_ENABLE_RTREE=1 -DSQLITE_SOUNDEX=1 \
-    -DSQLITE_ENABLE_UNLOCK_NOTIFY \
-    -DSQLITE_OMIT_LOOKASIDE=1 -DSQLITE_ENABLE_DBSTAT_VTAB \
-    -DSQLITE_ENABLE_UPDATE_DELETE_LIMIT=1 \
-    -DSQLITE_ENABLE_LOAD_EXTENSION \
-    -DSQLITE_ENABLE_JSON1 \
-    -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
-    -DSQLITE_THREADSAFE=1 \
-    -DSQLITE_ENABLE_FTS3_TOKENIZER=1 \
-    -DSQLITE_MAX_SCHEMA_RETRY=25 \
-    -DSQLITE_ENABLE_PREUPDATE_HOOK \
-    -DSQLITE_ENABLE_SESSION \
-    -DSQLITE_ENABLE_STMTVTAB \
-    -DSQLITE_MAX_VARIABLE_NUMBER=250000 \
-    -fPIC")
-  set(SQLITE_CONFIGURE_ENV ${SQLITE_CONFIGURE_ENV} && export LDFLAGS=${SQLITE_LDFLAGS} && export CFLAGS=${SQLITE_CFLAGS})
-  set(SQLITE_CONFIGURATION_ARGS
-    ${SQLITE_CONFIGURATION_ARGS}
-    --enable-threadsafe
-    --enable-load-extension
-    --enable-json1
-    --enable-fts4
-    --enable-fts5
-    # While building `tcl` is harmless, it causes problems when the install step
-    # tries to copy the files into the system path.
-    # Since this isn't required by Python or Blender this can be disabled.
-    # Note that Debian (for example), splits this off into a separate package,
-    # so it's safe to turn off.
-    --disable-tcl
-    --enable-shared=no
-  )
-endif()
-
-ExternalProject_Add(external_sqlite
-  URL file://${PACKAGE_DIR}/${SQLITE_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${SQLITE_HASH_TYPE}=${SQLITE_HASH}
-  PREFIX ${BUILD_DIR}/sqlite
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/sqlite/src/external_sqlite < ${PATCH_DIR}/sqlite.diff
-  CONFIGURE_COMMAND ${SQLITE_CONFIGURE_ENV} && cd ${BUILD_DIR}/sqlite/src/external_sqlite/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/sqlite ${SQLITE_CONFIGURATION_ARGS}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/sqlite/src/external_sqlite/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/sqlite/src/external_sqlite/ && make install
-  INSTALL_DIR ${LIBDIR}/sqlite
-)

build_files/build_environment/cmake/sse2neon.cmake

@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_sse2neon
-  GIT_REPOSITORY  ${SSE2NEON_GIT}
-  GIT_TAG ${SSE2NEON_GIT_HASH}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  PREFIX ${BUILD_DIR}/sse2neon
-  CONFIGURE_COMMAND echo sse2neon - Nothing to configure
-  BUILD_COMMAND echo sse2neon - nothing to build
-  INSTALL_COMMAND mkdir -p ${LIBDIR}/sse2neon && cp ${BUILD_DIR}/sse2neon/src/external_sse2neon/sse2neon.h ${LIBDIR}/sse2neon
-  INSTALL_DIR ${LIBDIR}/sse2neon
-)

build_files/build_environment/cmake/ssl.cmake

@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(SSL_CONFIGURE_COMMAND ./Configure)
-set(SSL_PATCH_CMD echo .)
-
-if(APPLE)
-  set(SSL_OS_COMPILER "blender-darwin-${CMAKE_OSX_ARCHITECTURES}")
-else()
-  if(BLENDER_PLATFORM_ARM)
-    set(SSL_OS_COMPILER "blender-linux-aarch64")
-  elseif("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    set(SSL_EXTRA_ARGS enable-ec_nistp_64_gcc_128)
-    set(SSL_OS_COMPILER "blender-linux-x86_64")
-  else()
-    set(SSL_OS_COMPILER "blender-linux-x86")
-  endif()
-endif()
-
-ExternalProject_Add(external_ssl
-  URL file://${PACKAGE_DIR}/${SSL_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${SSL_HASH_TYPE}=${SSL_HASH}
-  PREFIX ${BUILD_DIR}/ssl
-  PATCH_COMMAND ${SSL_PATCH_CMD}
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ssl/src/external_ssl/ && ${SSL_CONFIGURE_COMMAND} --prefix=${LIBDIR}/ssl
-    --openssldir=${LIBDIR}/ssl
-    no-shared
-    no-idea no-mdc2 no-rc5 no-zlib no-ssl3 enable-unit-test no-ssl3-method enable-rfc3779 enable-cms
-    --config=${CMAKE_CURRENT_SOURCE_DIR}/cmake/ssl.conf
-    ${SSL_OS_COMPILER}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ssl/src/external_ssl/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/ssl/src/external_ssl/ && make install
-  INSTALL_DIR ${LIBDIR}/ssl
-)

build_files/build_environment/cmake/ssl.conf

@@ -1,25 +0,0 @@
-my %targets = (
-
-  "blender-linux-x86" => {
-    inherit_from     => [ "linux-x86" ],
-    cflags => add("-fPIC"),
-  },
-  "blender-linux-x86_64" => {
-    inherit_from     => [ "linux-x86_64" ],
-    cflags => add("-fPIC"),
-  },
-  "blender-linux-aarch64" => {
-    inherit_from     => [ "linux-aarch64" ],
-    cxxflags => add("-fPIC"),
-    cflags => add("-fPIC"),
-  },
-  "blender-darwin-x86_64" => {
-    inherit_from     => [ "darwin64-x86_64-cc" ],
-    cflags => add("-fPIC"),
-  },
-  "blender-darwin-arm64" => {
-    inherit_from     => [ "darwin-common" ],
-    cxxflags => add("-fPIC -arch arm64"),
-    cflags => add("-fPIC -arch arm64"),
-  },
-);

build_files/build_environment/cmake/tbb.cmake

@@ -1,73 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-if(WIN32)
-  set(TBB_EXTRA_ARGS
-    -DTBB_BUILD_SHARED=On
-    -DTBB_BUILD_TBBMALLOC=On
-    -DTBB_BUILD_TBBMALLOC_PROXY=On
-    -DTBB_BUILD_STATIC=Off
-    -DTBB_BUILD_TESTS=Off
-    -DCMAKE_DEBUG_POSTFIX=_debug
-  )
-  set(TBB_LIBRARY tbb)
-  set(TBB_STATIC_LIBRARY Off)
-else()
-  set(TBB_EXTRA_ARGS
-    -DTBB_BUILD_SHARED=Off
-    -DTBB_BUILD_TBBMALLOC=On
-    -DTBB_BUILD_TBBMALLOC_PROXY=Off
-    -DTBB_BUILD_STATIC=On
-    -DTBB_BUILD_TESTS=Off
-  )
-  set(TBB_LIBRARY tbb_static)
-  set(TBB_STATIC_LIBRARY On)
-endif()
-
-# CMake script for TBB from https://github.com/wjakob/tbb/blob/master/CMakeLists.txt
-ExternalProject_Add(external_tbb
-  URL file://${PACKAGE_DIR}/${TBB_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${TBB_HASH_TYPE}=${TBB_HASH}
-  PREFIX ${BUILD_DIR}/tbb
-  PATCH_COMMAND COMMAND ${CMAKE_COMMAND} -E copy ${PATCH_DIR}/cmakelists_tbb.txt ${BUILD_DIR}/tbb/src/external_tbb/CMakeLists.txt &&
-  ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/tbb/src/external_tbb/build/vs2013/version_string.ver ${BUILD_DIR}/tbb/src/external_tbb/build/version_string.ver.in &&
-  ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/tbb/src/external_tbb < ${PATCH_DIR}/tbb.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/tbb ${DEFAULT_CMAKE_FLAGS} ${TBB_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/tbb
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_tbb after_install
-      # findtbb.cmake in some deps *NEEDS* to find tbb_debug.lib even if they are not going to use it
-      # to make that test pass, we place a copy with the right name in the lib folder.
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/lib/tbb.lib ${LIBDIR}/tbb/lib/tbb_debug.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/lib/tbbmalloc.lib ${LIBDIR}/tbb/lib/tbbmalloc_debug.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/bin/tbb.dll ${LIBDIR}/tbb/bin/tbb_debug.dll
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/bin/tbbmalloc.dll ${LIBDIR}/tbb/bin/tbbmalloc_debug.dll
-      # Normal collection of build artifacts
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/lib/tbb.lib ${HARVEST_TARGET}/tbb/lib/tbb.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/bin/tbb.dll ${HARVEST_TARGET}/tbb/bin/tbb.dll
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/lib/tbbmalloc.lib ${HARVEST_TARGET}/tbb/lib/tbbmalloc.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/bin/tbbmalloc.dll ${HARVEST_TARGET}/tbb/bin/tbbmalloc.dll
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/lib/tbbmalloc_proxy.lib ${HARVEST_TARGET}/tbb/lib/tbbmalloc_proxy.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/bin/tbbmalloc_proxy.dll ${HARVEST_TARGET}/tbb/bin/tbbmalloc_proxy.dll
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/tbb/include/ ${HARVEST_TARGET}/tbb/include/
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_tbb after_install
-      # findtbb.cmake in some deps *NEEDS* to find tbb.lib even if they are not going to use it
-      # to make that test pass, we place a copy with the right name in the lib folder.
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/lib/tbb_debug.lib ${LIBDIR}/tbb/lib/tbb.lib
-      # Normal collection of build artifacts
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/lib/tbb_debug.lib ${HARVEST_TARGET}/tbb/lib/tbb_debug.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/bin/tbb_debug.dll ${HARVEST_TARGET}/tbb/bin/tbb_debug.dll
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/lib/tbbmalloc_debug.lib ${HARVEST_TARGET}/tbb/lib/tbbmalloc_debug.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/lib/tbbmalloc_proxy_debug.lib ${HARVEST_TARGET}/tbb/lib/tbbmalloc_proxy_debug.lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/bin/tbbmalloc_debug.dll ${HARVEST_TARGET}/tbb/bin/tbbmalloc_debug.dll
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tbb/bin/tbbmalloc_proxy_debug.dll ${HARVEST_TARGET}/tbb/bin/tbbmalloc_proxy_debug.dll
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/theora.cmake

@@ -1,35 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(UNIX)
-  set(THEORA_CONFIGURE_ENV ${CONFIGURE_ENV} && export HAVE_PDFLATEX=no)
-else()
-  set(THEORA_CONFIGURE_ENV ${CONFIGURE_ENV})
-endif()
-
-ExternalProject_Add(external_theora
-  URL file://${PACKAGE_DIR}/${THEORA_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${THEORA_HASH_TYPE}=${THEORA_HASH}
-  PREFIX ${BUILD_DIR}/theora
-  PATCH_COMMAND ${PATCH_CMD} -p 0 -d ${BUILD_DIR}/theora/src/external_theora < ${PATCH_DIR}/theora.diff
-  CONFIGURE_COMMAND ${THEORA_CONFIGURE_ENV} && cd ${BUILD_DIR}/theora/src/external_theora/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/theora
-    --disable-shared
-    --enable-static
-    --with-pic
-    --with-ogg=${LIBDIR}/ogg
-    --with-vorbis=${LIBDIR}/vorbis
-    --disable-examples
-  BUILD_COMMAND ${THEORA_CONFIGURE_ENV} && cd ${BUILD_DIR}/theora/src/external_theora/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${THEORA_CONFIGURE_ENV} && cd ${BUILD_DIR}/theora/src/external_theora/ && make install
-  INSTALL_DIR ${LIBDIR}/theora
-)
-
-add_dependencies(
-  external_theora
-  external_vorbis
-  external_ogg
-)
-
-if(MSVC)
-  set_target_properties(external_theora PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/tiff.cmake

@@ -1,39 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WITH_WEBP)
-  set(WITH_TIFF_WEBP ON)
-else()
-  set(WITH_TIFF_WEBP OFF)
-endif()
-
-set(TIFF_EXTRA_ARGS
-  -DZLIB_LIBRARY=${LIBDIR}/zlib/lib/${ZLIB_LIBRARY}
-  -DZLIB_INCLUDE_DIR=${LIBDIR}/zlib/include
-  -DPNG_STATIC=ON
-  -DBUILD_SHARED_LIBS=OFF
-  -Dlzma=OFF
-  -Djbig=OFF
-  -Dzstd=OFF
-  -Dwebp=${WITH_TIFF_WEBP}
-)
-
-ExternalProject_Add(external_tiff
-  URL file://${PACKAGE_DIR}/${TIFF_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${TIFF_HASH_TYPE}=${TIFF_HASH}
-  PREFIX ${BUILD_DIR}/tiff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/tiff ${DEFAULT_CMAKE_FLAGS} ${TIFF_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/tiff
-)
-
-add_dependencies(
-  external_tiff
-  external_zlib
-)
-
-if(WIN32 AND BUILD_MODE STREQUAL Debug)
-  ExternalProject_Add_Step(external_tiff after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/tiff/lib/tiffd${LIBEXT} ${LIBDIR}/tiff/lib/tiff${LIBEXT}
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/usd.cmake

@@ -1,90 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(USD_EXTRA_ARGS
-  -DBoost_COMPILER:STRING=${BOOST_COMPILER_STRING}
-  -DBoost_USE_MULTITHREADED=ON
-  -DBoost_USE_STATIC_LIBS=ON
-  -DBoost_USE_STATIC_RUNTIME=OFF
-  -DBOOST_ROOT=${LIBDIR}/boost
-  -DBoost_NO_SYSTEM_PATHS=ON
-  -DBoost_NO_BOOST_CMAKE=ON
-  -DTBB_INCLUDE_DIRS=${LIBDIR}/tbb/include
-  -DTBB_LIBRARIES=${LIBDIR}/tbb/lib/${LIBPREFIX}${TBB_LIBRARY}${LIBEXT}
-  -DTbb_TBB_LIBRARY=${LIBDIR}/tbb/lib/${LIBPREFIX}${TBB_LIBRARY}${LIBEXT}
-  # USD wants the tbb debug lib set even when you are doing a release build
-  # Otherwise it will error out during the cmake configure phase.
-  -DTBB_LIBRARIES_DEBUG=${LIBDIR}/tbb/lib/${LIBPREFIX}${TBB_LIBRARY}${LIBEXT}
-
-  # This is a preventative measure that avoids possible conflicts when add-ons
-  # try to load another USD library into the same process space.
-  -DPXR_SET_INTERNAL_NAMESPACE=usdBlender
-
-  -DPXR_ENABLE_PYTHON_SUPPORT=OFF
-  -DPXR_BUILD_IMAGING=OFF
-  -DPXR_BUILD_TESTS=OFF
-  -DBUILD_SHARED_LIBS=OFF
-  -DPYTHON_EXECUTABLE=${PYTHON_BINARY}
-  -DPXR_BUILD_MONOLITHIC=ON
-
-  # The PXR_BUILD_USD_TOOLS argument is patched-in by usd.diff. An upstream pull request
-  # can be found at https://github.com/PixarAnimationStudios/USD/pull/1048.
-  -DPXR_BUILD_USD_TOOLS=OFF
-
-  -DCMAKE_DEBUG_POSTFIX=_d
-  # USD is hellbound on making a shared lib, unless you point this variable to a valid cmake file
-  # doesn't have to make sense, but as long as it points somewhere valid it will skip the shared lib.
-  -DPXR_MONOLITHIC_IMPORT=${BUILD_DIR}/usd/src/external_usd/cmake/defaults/Version.cmake
-)
-
-ExternalProject_Add(external_usd
-  URL file://${PACKAGE_DIR}/${USD_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${USD_HASH_TYPE}=${USD_HASH}
-  PREFIX ${BUILD_DIR}/usd
-  PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/usd/src/external_usd < ${PATCH_DIR}/usd.diff
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/usd -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${USD_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/usd
-)
-
-add_dependencies(
-  external_usd
-  external_tbb
-  external_boost
-)
-
-if(WIN32)
-  # USD currently demands python be available at build time
-  # and then proceeds not to use it, but still checks that the
-  # version of the interpreter it is not going to use is atleast 2.7
-  # so we need this dep currently since there is no system python
-  # on windows.
-  add_dependencies(
-    external_usd
-    external_python
-  )
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_usd after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/usd/ ${HARVEST_TARGET}/usd
-      COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/usd/src/external_usd-build/pxr/Release/usd_m.lib ${HARVEST_TARGET}/usd/lib/libusd_m.lib
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_usd after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/usd/lib ${HARVEST_TARGET}/usd/lib
-      COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/usd/src/external_usd-build/pxr/Debug/usd_m_d.lib ${HARVEST_TARGET}/usd/lib/libusd_m_d.lib
-      DEPENDEES install
-    )
-  endif()
-else()
-  # USD has two build options. The default build creates lots of small libraries,
-  # whereas the 'monolithic' build produces only a single library. The latter
-  # makes linking simpler, so that's what we use in Blender. However, running
-  # 'make install' in the USD sources doesn't install the static library in that
-  # case (only the shared library). As a result, we need to grab the `libusd_m.a`
-  # file from the build directory instead of from the install directory.
-  ExternalProject_Add_Step(external_usd after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/usd/src/external_usd-build/pxr/libusd_m.a ${HARVEST_TARGET}/usd/lib/libusd_m.a
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/versions.cmake

@@ -1,494 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(ZLIB_VERSION 1.2.11)
-set(ZLIB_URI https://zlib.net/zlib-${ZLIB_VERSION}.tar.gz)
-set(ZLIB_HASH 1c9f62f0778697a09d36121ead88e08e)
-set(ZLIB_HASH_TYPE MD5)
-set(ZLIB_FILE zlib-${ZLIB_VERSION}.tar.gz)
-
-set(OPENAL_VERSION 1.20.1)
-set(OPENAL_URI http://openal-soft.org/openal-releases/openal-soft-${OPENAL_VERSION}.tar.bz2)
-set(OPENAL_HASH 556695068ce8375b89986083d810fd35)
-set(OPENAL_HASH_TYPE MD5)
-set(OPENAL_FILE openal-soft-${OPENAL_VERSION}.tar.bz2)
-
-set(PNG_VERSION 1.6.37)
-set(PNG_URI http://prdownloads.sourceforge.net/libpng/libpng-${PNG_VERSION}.tar.xz)
-set(PNG_HASH 505e70834d35383537b6491e7ae8641f1a4bed1876dbfe361201fc80868d88ca)
-set(PNG_HASH_TYPE SHA256)
-set(PNG_FILE libpng-${PNG_VERSION}.tar.xz)
-
-set(JPEG_VERSION 2.0.4)
-set(JPEG_URI https://github.com/libjpeg-turbo/libjpeg-turbo/archive/${JPEG_VERSION}.tar.gz)
-set(JPEG_HASH 44c43e4a9fb352f47090804529317c88)
-set(JPEG_HASH_TYPE MD5)
-set(JPEG_FILE libjpeg-turbo-${JPEG_VERSION}.tar.gz)
-
-set(BOOST_VERSION 1.73.0)
-set(BOOST_VERSION_NODOTS 1_73_0)
-set(BOOST_VERSION_NODOTS_SHORT 1_73)
-set(BOOST_URI https://boostorg.jfrog.io/artifactory/main/release/${BOOST_VERSION}/source/boost_${BOOST_VERSION_NODOTS}.tar.gz)
-set(BOOST_HASH 4036cd27ef7548b8d29c30ea10956196)
-set(BOOST_HASH_TYPE MD5)
-set(BOOST_FILE boost_${BOOST_VERSION_NODOTS}.tar.gz)
-
-# Using old version as recommended by OpenVDB build documentation.
-set(BLOSC_VERSION 1.5.0)
-set(BLOSC_URI https://github.com/Blosc/c-blosc/archive/v${BLOSC_VERSION}.tar.gz)
-set(BLOSC_HASH 6e4a49c8c06f05aa543f3312cfce3d55)
-set(BLOSC_HASH_TYPE MD5)
-set(BLOSC_FILE blosc-${BLOSC_VERSION}.tar.gz)
-
-set(PTHREADS_VERSION 3.0.0)
-set(PTHREADS_URI http://prdownloads.sourceforge.net/pthreads4w/pthreads4w-code-v${PTHREADS_VERSION}.zip)
-set(PTHREADS_HASH f3bf81bb395840b3446197bcf4ecd653)
-set(PTHREADS_HASH_TYPE MD5)
-set(PTHREADS_FILE pthreads4w-code-${PTHREADS_VERSION}.zip)
-
-set(OPENEXR_VERSION 2.5.5)
-set(OPENEXR_URI https://github.com/AcademySoftwareFoundation/openexr/archive/v${OPENEXR_VERSION}.tar.gz)
-set(OPENEXR_HASH 85e8a979092c9055d10ed103062d31a0)
-set(OPENEXR_HASH_TYPE MD5)
-set(OPENEXR_FILE openexr-${OPENEXR_VERSION}.tar.gz)
-
-if(WIN32)
-  # Openexr started appending _d on its own so now
-  # we need to tell the build the postfix is _s while
-  # telling all other deps the postfix is _s_d
-  if(BUILD_MODE STREQUAL Release)
-    set(OPENEXR_VERSION_POSTFIX _s)
-    set(OPENEXR_VERSION_BUILD_POSTFIX _s)
-  else()
-    set(OPENEXR_VERSION_POSTFIX _s_d)
-    set(OPENEXR_VERSION_BUILD_POSTFIX _s)
-  endif()
-else()
-  set(OPENEXR_VERSION_BUILD_POSTFIX)
-  set(OPENEXR_VERSION_POSTFIX)
-endif()
-
-set(FREETYPE_VERSION 2.11.1)
-set(FREETYPE_URI http://prdownloads.sourceforge.net/freetype/freetype-${FREETYPE_VERSION}.tar.gz)
-set(FREETYPE_HASH bd4e3b007474319909a6b79d50908e85)
-set(FREETYPE_HASH_TYPE MD5)
-set(FREETYPE_FILE freetype-${FREETYPE_VERSION}.tar.gz)
-
-set(GLEW_VERSION 1.13.0)
-set(GLEW_URI http://prdownloads.sourceforge.net/glew/glew/${GLEW_VERSION}/glew-${GLEW_VERSION}.tgz)
-set(GLEW_HASH 7cbada3166d2aadfc4169c4283701066)
-set(GLEW_HASH_TYPE MD5)
-set(GLEW_FILE glew-${GLEW_VERSION}.tgz)
-
-set(FREEGLUT_VERSION 3.0.0)
-set(FREEGLUT_URI http://prdownloads.sourceforge.net/freeglut/freeglut/${FREEGLUT_VERSION}/freeglut-${FREEGLUT_VERSION}.tar.gz)
-set(FREEGLUT_HASH 90c3ca4dd9d51cf32276bc5344ec9754)
-set(FREEGLUT_HASH_TYPE MD5)
-set(FREEGLUT_FILE freeglut-${FREEGLUT_VERSION}.tar.gz)
-
-set(ALEMBIC_VERSION 1.7.16)
-set(ALEMBIC_URI https://github.com/alembic/alembic/archive/${ALEMBIC_VERSION}.tar.gz)
-set(ALEMBIC_HASH effcc86e42fe6605588e3de57bde6677)
-set(ALEMBIC_HASH_TYPE MD5)
-set(ALEMBIC_FILE alembic-${ALEMBIC_VERSION}.tar.gz)
-
-# hash is for 3.1.2
-set(GLFW_GIT_UID 30306e54705c3adae9fe082c816a3be71963485c)
-set(GLFW_URI https://github.com/glfw/glfw/archive/${GLFW_GIT_UID}.zip)
-set(GLFW_HASH 20cacb1613da7eeb092f3ac4f6b2b3d0)
-set(GLFW_HASH_TYPE MD5)
-set(GLFW_FILE glfw-${GLFW_GIT_UID}.zip)
-
-# latest uid in git as of 2016-04-01
-set(CLEW_GIT_UID 277db43f6cafe8b27c6f1055f69dc67da4aeb299)
-set(CLEW_URI https://github.com/OpenCLWrangler/clew/archive/${CLEW_GIT_UID}.zip)
-set(CLEW_HASH 2c699d10ed78362e71f56fae2a4c5f98)
-set(CLEW_HASH_TYPE MD5)
-set(CLEW_FILE clew-${CLEW_GIT_UID}.zip)
-
-# latest uid in git as of 2016-04-01
-set(CUEW_GIT_UID 1744972026de9cf27c8a7dc39cf39cd83d5f922f)
-set(CUEW_URI https://github.com/CudaWrangler/cuew/archive/${CUEW_GIT_UID}.zip)
-set(CUEW_HASH 86760d62978ebfd96cd93f5aa1abaf4a)
-set(CUEW_HASH_TYPE MD5)
-set(CUEW_FILE cuew-${CUEW_GIT_UID}.zip)
-
-set(OPENSUBDIV_VERSION v3_4_3)
-set(OPENSUBDIV_URI https://github.com/PixarAnimationStudios/OpenSubdiv/archive/${OPENSUBDIV_VERSION}.tar.gz)
-set(OPENSUBDIV_HASH 7bbfa275d021fb829e521df749160edb)
-set(OPENSUBDIV_HASH_TYPE MD5)
-set(OPENSUBDIV_FILE opensubdiv-${OPENSUBDIV_VERSION}.tar.gz)
-
-set(SDL_VERSION 2.0.12)
-set(SDL_URI https://www.libsdl.org/release/SDL2-${SDL_VERSION}.tar.gz)
-set(SDL_HASH 783b6f2df8ff02b19bb5ce492b99c8ff)
-set(SDL_HASH_TYPE MD5)
-set(SDL_FILE SDL2-${SDL_VERSION}.tar.gz)
-
-set(OPENCOLLADA_VERSION v1.6.68)
-set(OPENCOLLADA_URI https://github.com/KhronosGroup/OpenCOLLADA/archive/${OPENCOLLADA_VERSION}.tar.gz)
-set(OPENCOLLADA_HASH ee7dae874019fea7be11613d07567493)
-set(OPENCOLLADA_HASH_TYPE MD5)
-set(OPENCOLLADA_FILE opencollada-${OPENCOLLADA_VERSION}.tar.gz)
-
-set(OPENCOLORIO_VERSION 2.0.0)
-set(OPENCOLORIO_URI https://github.com/AcademySoftwareFoundation/OpenColorIO/archive/v${OPENCOLORIO_VERSION}.tar.gz)
-set(OPENCOLORIO_HASH 1a2e3478b6cd9a1549f24e1b2205e3f0)
-set(OPENCOLORIO_HASH_TYPE MD5)
-set(OPENCOLORIO_FILE OpenColorIO-${OPENCOLORIO_VERSION}.tar.gz)
-
-set(LLVM_VERSION 12.0.0)
-set(LLVM_URI https://github.com/llvm/llvm-project/releases/download/llvmorg-${LLVM_VERSION}/llvm-project-${LLVM_VERSION}.src.tar.xz)
-set(LLVM_HASH 5a4fab4d7fc84aefffb118ac2c8a4fc0)
-set(LLVM_HASH_TYPE MD5)
-set(LLVM_FILE llvm-project-${LLVM_VERSION}.src.tar.xz)
-
-if(APPLE)
-  # Cloth physics test is crashing due to this bug:
-  # https://bugs.llvm.org/show_bug.cgi?id=50579
-  set(OPENMP_VERSION 9.0.1)
-  set(OPENMP_HASH 6eade16057edbdecb3c4eef9daa2bfcf)
-else()
-  set(OPENMP_VERSION ${LLVM_VERSION})
-  set(OPENMP_HASH ac48ce3e4582ccb82f81ab59eb3fc9dc)
-endif()
-set(OPENMP_URI https://github.com/llvm/llvm-project/releases/download/llvmorg-${OPENMP_VERSION}/openmp-${OPENMP_VERSION}.src.tar.xz)
-set(OPENMP_HASH_TYPE MD5)
-set(OPENMP_FILE openmp-${OPENMP_VERSION}.src.tar.xz)
-
-set(OPENIMAGEIO_VERSION 2.2.15.1)
-set(OPENIMAGEIO_URI https://github.com/OpenImageIO/oiio/archive/Release-${OPENIMAGEIO_VERSION}.tar.gz)
-set(OPENIMAGEIO_HASH 3db5c5f0b3dc91597c75e5df09eb9072)
-set(OPENIMAGEIO_HASH_TYPE MD5)
-set(OPENIMAGEIO_FILE OpenImageIO-${OPENIMAGEIO_VERSION}.tar.gz)
-
-set(TIFF_VERSION 4.1.0)
-set(TIFF_URI http://download.osgeo.org/libtiff/tiff-${TIFF_VERSION}.tar.gz)
-set(TIFF_HASH 2165e7aba557463acc0664e71a3ed424)
-set(TIFF_HASH_TYPE MD5)
-set(TIFF_FILE tiff-${TIFF_VERSION}.tar.gz)
-
-set(OSL_VERSION 1.11.14.1)
-set(OSL_URI https://github.com/imageworks/OpenShadingLanguage/archive/Release-${OSL_VERSION}.tar.gz)
-set(OSL_HASH 1abd7ce40481771a9fa937f19595d2f2)
-set(OSL_HASH_TYPE MD5)
-set(OSL_FILE OpenShadingLanguage-${OSL_VERSION}.tar.gz)
-
-set(PYTHON_VERSION 3.10.2)
-set(PYTHON_SHORT_VERSION 3.10)
-set(PYTHON_SHORT_VERSION_NO_DOTS 310)
-set(PYTHON_URI https://www.python.org/ftp/python/${PYTHON_VERSION}/Python-${PYTHON_VERSION}.tar.xz)
-set(PYTHON_HASH 14e8c22458ed7779a1957b26cde01db9)
-set(PYTHON_HASH_TYPE MD5)
-set(PYTHON_FILE Python-${PYTHON_VERSION}.tar.xz)
-
-set(TBB_VERSION 2020_U2)
-set(TBB_URI https://github.com/oneapi-src/oneTBB/archive/${TBB_VERSION}.tar.gz)
-set(TBB_HASH 1b711ae956524855088df3bbf5ec65dc)
-set(TBB_HASH_TYPE MD5)
-set(TBB_FILE oneTBB-${TBB_VERSION}.tar.gz)
-
-set(OPENVDB_VERSION 8.0.1)
-set(OPENVDB_URI https://github.com/AcademySoftwareFoundation/openvdb/archive/v${OPENVDB_VERSION}.tar.gz)
-set(OPENVDB_HASH 01b490be16cc0e15c690f9a153c21461)
-set(OPENVDB_HASH_TYPE MD5)
-set(OPENVDB_FILE openvdb-${OPENVDB_VERSION}.tar.gz)
-
-set(NANOVDB_GIT_UID dc37d8a631922e7bef46712947dc19b755f3e841)
-set(NANOVDB_URI https://github.com/AcademySoftwareFoundation/openvdb/archive/${NANOVDB_GIT_UID}.tar.gz)
-set(NANOVDB_HASH e7b9e863ec2f3b04ead171dec2322807)
-set(NANOVDB_HASH_TYPE MD5)
-set(NANOVDB_FILE nano-vdb-${NANOVDB_GIT_UID}.tar.gz)
-
-set(IDNA_VERSION 3.3)
-set(CHARSET_NORMALIZER_VERSION 2.0.10)
-set(URLLIB3_VERSION 1.26.8)
-set(CERTIFI_VERSION 2021.10.8)
-set(REQUESTS_VERSION 2.27.1)
-set(CYTHON_VERSION 0.29.26)
-# The version of the zstd library used to build the Python package should match ZSTD_VERSION defined below.
-# At this time of writing, 0.17.0 was already released, but built against zstd 1.5.1, while we use 1.5.0.
-set(ZSTANDARD_VERSION 0.16.0)
-
-set(NUMPY_VERSION 1.22.0)
-set(NUMPY_SHORT_VERSION 1.22)
-set(NUMPY_URI https://github.com/numpy/numpy/releases/download/v${NUMPY_VERSION}/numpy-${NUMPY_VERSION}.zip)
-set(NUMPY_HASH 252de134862a27bd66705d29622edbfe)
-set(NUMPY_HASH_TYPE MD5)
-set(NUMPY_FILE numpy-${NUMPY_VERSION}.zip)
-
-set(LAME_VERSION 3.100)
-set(LAME_URI http://downloads.sourceforge.net/project/lame/lame/3.100/lame-${LAME_VERSION}.tar.gz)
-set(LAME_HASH 83e260acbe4389b54fe08e0bdbf7cddb)
-set(LAME_HASH_TYPE MD5)
-set(LAME_FILE lame-${LAME_VERSION}.tar.gz)
-
-set(OGG_VERSION 1.3.4)
-set(OGG_URI http://downloads.xiph.org/releases/ogg/libogg-${OGG_VERSION}.tar.gz)
-set(OGG_HASH fe5670640bd49e828d64d2879c31cb4dde9758681bb664f9bdbf159a01b0c76e)
-set(OGG_HASH_TYPE SHA256)
-set(OGG_FILE libogg-${OGG_VERSION}.tar.gz)
-
-set(VORBIS_VERSION 1.3.6)
-set(VORBIS_URI http://downloads.xiph.org/releases/vorbis/libvorbis-${VORBIS_VERSION}.tar.gz)
-set(VORBIS_HASH 6ed40e0241089a42c48604dc00e362beee00036af2d8b3f46338031c9e0351cb)
-set(VORBIS_HASH_TYPE SHA256)
-set(VORBIS_FILE libvorbis-${VORBIS_VERSION}.tar.gz)
-
-set(THEORA_VERSION 1.1.1)
-set(THEORA_URI http://downloads.xiph.org/releases/theora/libtheora-${THEORA_VERSION}.tar.bz2)
-set(THEORA_HASH b6ae1ee2fa3d42ac489287d3ec34c5885730b1296f0801ae577a35193d3affbc)
-set(THEORA_HASH_TYPE SHA256)
-set(THEORA_FILE libtheora-${THEORA_VERSION}.tar.bz2)
-
-set(FLAC_VERSION 1.3.3)
-set(FLAC_URI http://downloads.xiph.org/releases/flac/flac-${FLAC_VERSION}.tar.xz)
-set(FLAC_HASH 213e82bd716c9de6db2f98bcadbc4c24c7e2efe8c75939a1a84e28539c4e1748)
-set(FLAC_HASH_TYPE SHA256)
-set(FLAC_FILE flac-${FLAC_VERSION}.tar.xz)
-
-set(VPX_VERSION 1.8.2)
-set(VPX_URI https://github.com/webmproject/libvpx/archive/v${VPX_VERSION}/libvpx-v${VPX_VERSION}.tar.gz)
-set(VPX_HASH 8735d9fcd1a781ae6917f28f239a8aa358ce4864ba113ea18af4bb2dc8b474ac)
-set(VPX_HASH_TYPE SHA256)
-set(VPX_FILE libvpx-v${VPX_VERSION}.tar.gz)
-
-set(OPUS_VERSION 1.3.1)
-set(OPUS_URI https://archive.mozilla.org/pub/opus/opus-${OPUS_VERSION}.tar.gz)
-set(OPUS_HASH 65b58e1e25b2a114157014736a3d9dfeaad8d41be1c8179866f144a2fb44ff9d)
-set(OPUS_HASH_TYPE SHA256)
-set(OPUS_FILE opus-${OPUS_VERSION}.tar.gz)
-
-set(X264_VERSION 33f9e1474613f59392be5ab6a7e7abf60fa63622)
-set(X264_URI https://code.videolan.org/videolan/x264/-/archive/${X264_VERSION}/x264-${X264_VERSION}.tar.gz)
-set(X264_HASH 5456450ee1ae02cd2328be3157367a232a0ab73315e8c8f80dab80469524f525)
-set(X264_HASH_TYPE SHA256)
-set(X264_FILE x264-${X264_VERSION}.tar.gz)
-
-set(XVIDCORE_VERSION 1.3.7)
-set(XVIDCORE_URI https://downloads.xvid.com/downloads/xvidcore-${XVIDCORE_VERSION}.tar.gz)
-set(XVIDCORE_HASH abbdcbd39555691dd1c9b4d08f0a031376a3b211652c0d8b3b8aa9be1303ce2d)
-set(XVIDCORE_HASH_TYPE SHA256)
-set(XVIDCORE_FILE xvidcore-${XVIDCORE_VERSION}.tar.gz)
-
-set(OPENJPEG_VERSION 2.3.1)
-set(OPENJPEG_SHORT_VERSION 2.3)
-set(OPENJPEG_URI https://github.com/uclouvain/openjpeg/archive/v${OPENJPEG_VERSION}.tar.gz)
-set(OPENJPEG_HASH 63f5a4713ecafc86de51bfad89cc07bb788e9bba24ebbf0c4ca637621aadb6a9)
-set(OPENJPEG_HASH_TYPE SHA256)
-set(OPENJPEG_FILE openjpeg-v${OPENJPEG_VERSION}.tar.gz)
-
-set(FFMPEG_VERSION 4.4)
-set(FFMPEG_URI http://ffmpeg.org/releases/ffmpeg-${FFMPEG_VERSION}.tar.bz2)
-set(FFMPEG_HASH 42093549751b582cf0f338a21a3664f52e0a9fbe0d238d3c992005e493607d0e)
-set(FFMPEG_HASH_TYPE SHA256)
-set(FFMPEG_FILE ffmpeg-${FFMPEG_VERSION}.tar.bz2)
-
-set(FFTW_VERSION 3.3.8)
-set(FFTW_URI http://www.fftw.org/fftw-${FFTW_VERSION}.tar.gz)
-set(FFTW_HASH 8aac833c943d8e90d51b697b27d4384d)
-set(FFTW_HASH_TYPE MD5)
-set(FFTW_FILE fftw-${FFTW_VERSION}.tar.gz)
-
-set(ICONV_VERSION 1.16)
-set(ICONV_URI http://ftp.gnu.org/pub/gnu/libiconv/libiconv-${ICONV_VERSION}.tar.gz)
-set(ICONV_HASH 7d2a800b952942bb2880efb00cfd524c)
-set(ICONV_HASH_TYPE MD5)
-set(ICONV_FILE libiconv-${ICONV_VERSION}.tar.gz)
-
-set(SNDFILE_VERSION 1.0.28)
-set(SNDFILE_URI http://www.mega-nerd.com/libsndfile/files/libsndfile-${SNDFILE_VERSION}.tar.gz)
-set(SNDFILE_HASH 646b5f98ce89ac60cdb060fcd398247c)
-set(SNDFILE_HASH_TYPE MD5)
-set(SNDFILE_FILE libsndfile-${SNDFILE_VERSION}.tar.gz)
-
-set(WEBP_VERSION 0.6.1)
-set(WEBP_URI https://storage.googleapis.com/downloads.webmproject.org/releases/webp/libwebp-${WEBP_VERSION}.tar.gz)
-set(WEBP_HASH b49ce9c3e3e9acae4d91bca44bb85a72)
-set(WEBP_HASH_TYPE MD5)
-set(WEBP_FILE libwebp-${WEBP_VERSION}.tar.gz)
-
-set(SPNAV_VERSION 0.2.3)
-set(SPNAV_URI http://downloads.sourceforge.net/project/spacenav/spacenav%20library%20%28SDK%29/libspnav%20${SPNAV_VERSION}/libspnav-${SPNAV_VERSION}.tar.gz)
-set(SPNAV_HASH 44d840540d53326d4a119c0f1aa7bf0a)
-set(SPNAV_HASH_TYPE MD5)
-set(SPNAV_FILE libspnav-${SPNAV_VERSION}.tar.gz)
-
-set(JEMALLOC_VERSION 5.2.1)
-set(JEMALLOC_URI https://github.com/jemalloc/jemalloc/releases/download/${JEMALLOC_VERSION}/jemalloc-${JEMALLOC_VERSION}.tar.bz2)
-set(JEMALLOC_HASH 3d41fbf006e6ebffd489bdb304d009ae)
-set(JEMALLOC_HASH_TYPE MD5)
-set(JEMALLOC_FILE jemalloc-${JEMALLOC_VERSION}.tar.bz2)
-
-set(XML2_VERSION 2.9.10)
-set(XML2_URI http://xmlsoft.org/sources/libxml2-${XML2_VERSION}.tar.gz)
-set(XML2_HASH 10942a1dc23137a8aa07f0639cbfece5)
-set(XML2_HASH_TYPE MD5)
-set(XML2_FILE libxml2-${XML2_VERSION}.tar.gz)
-
-set(TINYXML_VERSION 2_6_2)
-set(TINYXML_VERSION_DOTS 2.6.2)
-set(TINYXML_URI https://nchc.dl.sourceforge.net/project/tinyxml/tinyxml/${TINYXML_VERSION_DOTS}/tinyxml_${TINYXML_VERSION}.tar.gz)
-set(TINYXML_HASH c1b864c96804a10526540c664ade67f0)
-set(TINYXML_HASH_TYPE MD5)
-set(TINYXML_FILE tinyxml_${TINYXML_VERSION}.tar.gz)
-
-set(YAMLCPP_VERSION 0.6.3)
-set(YAMLCPP_URI https://codeload.github.com/jbeder/yaml-cpp/tar.gz/yaml-cpp-${YAMLCPP_VERSION})
-set(YAMLCPP_HASH b45bf1089a382e81f6b661062c10d0c2)
-set(YAMLCPP_HASH_TYPE MD5)
-set(YAMLCPP_FILE yaml-cpp-${YAMLCPP_VERSION}.tar.gz)
-
-set(EXPAT_VERSION 2_2_10)
-set(EXPAT_URI https://github.com/libexpat/libexpat/archive/R_${EXPAT_VERSION}.tar.gz)
-set(EXPAT_HASH 7ca5f09959fcb9a57618368deb627b9f)
-set(EXPAT_HASH_TYPE MD5)
-set(EXPAT_FILE libexpat-${EXPAT_VERSION}.tar.gz)
-
-set(PUGIXML_VERSION 1.10)
-set(PUGIXML_URI https://github.com/zeux/pugixml/archive/v${PUGIXML_VERSION}.tar.gz)
-set(PUGIXML_HASH 0c208b0664c7fb822bf1b49ad035e8fd)
-set(PUGIXML_HASH_TYPE MD5)
-set(PUGIXML_FILE pugixml-${PUGIXML_VERSION}.tar.gz)
-
-set(FLEXBISON_VERSION 2.5.24)
-set(FLEXBISON_URI http://prdownloads.sourceforge.net/winflexbison/win_flex_bison-${FLEXBISON_VERSION}.zip)
-set(FLEXBISON_HASH 6b549d43e34ece0e8ed05af92daa31c4)
-set(FLEXBISON_HASH_TYPE MD5)
-set(FLEXBISON_FILE win_flex_bison-${FLEXBISON_VERSION}.zip)
-
-set(FLEX_VERSION 2.6.4)
-set(FLEX_URI https://github.com/westes/flex/releases/download/v${FLEX_VERSION}/flex-${FLEX_VERSION}.tar.gz)
-set(FLEX_HASH 2882e3179748cc9f9c23ec593d6adc8d)
-set(FLEX_HASH_TYPE MD5)
-set(FLEX_FILE flex-${FLEX_VERSION}.tar.gz)
-
-# Libraries to keep Python modules static on Linux.
-
-# NOTE: bzip.org domain does no longer belong to BZip 2 project, so we download
-# sources from Debian packaging.
-set(BZIP2_VERSION 1.0.8)
-set(BZIP2_URI http://http.debian.net/debian/pool/main/b/bzip2/bzip2_${BZIP2_VERSION}.orig.tar.gz)
-set(BZIP2_HASH ab5a03176ee106d3f0fa90e381da478ddae405918153cca248e682cd0c4a2269)
-set(BZIP2_HASH_TYPE SHA256)
-set(BZIP2_FILE bzip2_${BZIP2_VERSION}.orig.tar.gz)
-
-set(FFI_VERSION 3.3)
-set(FFI_URI https://sourceware.org/pub/libffi/libffi-${FFI_VERSION}.tar.gz)
-set(FFI_HASH 72fba7922703ddfa7a028d513ac15a85c8d54c8d67f55fa5a4802885dc652056)
-set(FFI_HASH_TYPE SHA256)
-set(FFI_FILE libffi-${FFI_VERSION}.tar.gz)
-
-set(LZMA_VERSION 5.2.5)
-set(LZMA_URI https://tukaani.org/xz/xz-${LZMA_VERSION}.tar.bz2)
-set(LZMA_HASH 5117f930900b341493827d63aa910ff5e011e0b994197c3b71c08a20228a42df)
-set(LZMA_HASH_TYPE SHA256)
-set(LZMA_FILE xz-${LZMA_VERSION}.tar.bz2)
-
-if(BLENDER_PLATFORM_ARM)
-  # Need at least 1.1.1i for aarch64 support (https://github.com/openssl/openssl/pull/13218)
-  set(SSL_VERSION 1.1.1i)
-  set(SSL_URI https://www.openssl.org/source/openssl-${SSL_VERSION}.tar.gz)
-  set(SSL_HASH e8be6a35fe41d10603c3cc635e93289ed00bf34b79671a3a4de64fcee00d5242)
-  set(SSL_HASH_TYPE SHA256)
-  set(SSL_FILE openssl-${SSL_VERSION}.tar.gz)
-else()
-  set(SSL_VERSION 1.1.1g)
-  set(SSL_URI https://www.openssl.org/source/openssl-${SSL_VERSION}.tar.gz)
-  set(SSL_HASH ddb04774f1e32f0c49751e21b67216ac87852ceb056b75209af2443400636d46)
-  set(SSL_HASH_TYPE SHA256)
-  set(SSL_FILE openssl-${SSL_VERSION}.tar.gz)
-endif()
-
-set(SQLITE_VERSION 3.31.1)
-set(SQLITE_URI https://www.sqlite.org/2018/sqlite-src-3240000.zip)
-set(SQLITE_HASH fb558c49ee21a837713c4f1e7e413309aabdd9c7)
-set(SQLITE_HASH_TYPE SHA1)
-set(SQLITE_FILE sqlite-src-3240000.zip)
-
-set(EMBREE_VERSION 3.10.0)
-set(EMBREE_URI https://github.com/embree/embree/archive/v${EMBREE_VERSION}.zip)
-set(EMBREE_HASH 4bbe29e7eaa46417efc75fc5f1e8eb87)
-set(EMBREE_HASH_TYPE MD5)
-set(EMBREE_FILE embree-v${EMBREE_VERSION}.zip)
-set(EMBREE_ARM_GIT https://github.com/brechtvl/embree.git)
-
-set(USD_VERSION 21.02)
-set(USD_URI https://github.com/PixarAnimationStudios/USD/archive/v${USD_VERSION}.tar.gz)
-set(USD_HASH 1dd1e2092d085ed393c1f7c450a4155a)
-set(USD_HASH_TYPE MD5)
-set(USD_FILE usd-v${USD_VERSION}.tar.gz)
-
-set(OIDN_VERSION 1.4.1)
-set(OIDN_URI https://github.com/OpenImageDenoise/oidn/releases/download/v${OIDN_VERSION}/oidn-${OIDN_VERSION}.src.tar.gz)
-set(OIDN_HASH df4007b0ab93b1c41cdf223b075d01c0)
-set(OIDN_HASH_TYPE MD5)
-set(OIDN_FILE oidn-${OIDN_VERSION}.src.tar.gz)
-
-set(LIBGLU_VERSION 9.0.1)
-set(LIBGLU_URI ftp://ftp.freedesktop.org/pub/mesa/glu/glu-${LIBGLU_VERSION}.tar.xz)
-set(LIBGLU_HASH 151aef599b8259efe9acd599c96ea2a3)
-set(LIBGLU_HASH_TYPE MD5)
-set(LIBGLU_FILE glu-${LIBGLU_VERSION}.tar.xz)
-
-set(MESA_VERSION 21.1.5)
-set(MESA_URI ftp://ftp.freedesktop.org/pub/mesa/mesa-${MESA_VERSION}.tar.xz)
-set(MESA_HASH 022c7293074aeeced2278c872db4fa693147c70f8595b076cf3f1ef81520766d)
-set(MESA_HASH_TYPE SHA256)
-set(MESA_FILE mesa-${MESA_VERSION}.tar.xz)
-
-set(NASM_VERSION 2.15.02)
-set(NASM_URI https://github.com/netwide-assembler/nasm/archive/nasm-${NASM_VERSION}.tar.gz)
-set(NASM_HASH aded8b796c996a486a56e0515c83e414116decc3b184d88043480b32eb0a8589)
-set(NASM_HASH_TYPE SHA256)
-set(NASM_FILE nasm-${NASM_VERSION}.tar.gz)
-
-set(XR_OPENXR_SDK_VERSION 1.0.22)
-set(XR_OPENXR_SDK_URI https://github.com/KhronosGroup/OpenXR-SDK/archive/release-${XR_OPENXR_SDK_VERSION}.tar.gz)
-set(XR_OPENXR_SDK_HASH a2623ebab3d0b340bc16311b14f02075)
-set(XR_OPENXR_SDK_HASH_TYPE MD5)
-set(XR_OPENXR_SDK_FILE OpenXR-SDK-${XR_OPENXR_SDK_VERSION}.tar.gz)
-
-set(WL_PROTOCOLS_VERSION 1.21)
-set(WL_PROTOCOLS_FILE wayland-protocols-${WL_PROTOCOLS_VERSION}.tar.gz)
-set(WL_PROTOCOLS_URI https://gitlab.freedesktop.org/wayland/wayland-protocols/-/archive/${WL_PROTOCOLS_VERSION}/${WL_PROTOCOLS_FILE})
-set(WL_PROTOCOLS_HASH af5ca07e13517cdbab33504492cef54a)
-set(WL_PROTOCOLS_HASH_TYPE MD5)
-
-set(ISPC_VERSION v1.16.0)
-set(ISPC_URI https://github.com/ispc/ispc/archive/${ISPC_VERSION}.tar.gz)
-set(ISPC_HASH 2e3abedbc0ea9aaec17d6562c632454d)
-set(ISPC_HASH_TYPE MD5)
-set(ISPC_FILE ispc-${ISPC_VERSION}.tar.gz)
-
-set(GMP_VERSION 6.2.1)
-set(GMP_URI https://gmplib.org/download/gmp/gmp-${GMP_VERSION}.tar.xz)
-set(GMP_HASH 0b82665c4a92fd2ade7440c13fcaa42b)
-set(GMP_HASH_TYPE MD5)
-set(GMP_FILE gmp-${GMP_VERSION}.tar.xz)
-
-set(POTRACE_VERSION 1.16)
-set(POTRACE_URI http://potrace.sourceforge.net/download/${POTRACE_VERSION}/potrace-${POTRACE_VERSION}.tar.gz)
-set(POTRACE_HASH 5f0bd87ddd9a620b0c4e65652ef93d69)
-set(POTRACE_HASH_TYPE MD5)
-set(POTRACE_FILE potrace-${POTRACE_VERSION}.tar.gz)
-
-set(HARU_VERSION 2_3_0)
-set(HARU_URI https://github.com/libharu/libharu/archive/RELEASE_${HARU_VERSION}.tar.gz)
-set(HARU_HASH 4f916aa49c3069b3a10850013c507460)
-set(HARU_HASH_TYPE MD5)
-set(HARU_FILE libharu-${HARU_VERSION}.tar.gz)
-
-set(ZSTD_VERSION 1.5.0)
-set(ZSTD_URI https://github.com/facebook/zstd/releases/download/v${ZSTD_VERSION}/zstd-${ZSTD_VERSION}.tar.gz)
-set(ZSTD_HASH 5194fbfa781fcf45b98c5e849651aa7b3b0a008c6b72d4a0db760f3002291e94)
-set(ZSTD_HASH_TYPE SHA256)
-set(ZSTD_FILE zstd-${ZSTD_VERSION}.tar.gz)
-
-set(SSE2NEON_GIT https://github.com/DLTcollab/sse2neon.git)
-set(SSE2NEON_GIT_HASH fe5ff00bb8d19b327714a3c290f3e2ce81ba3525)
-
-set(BROTLI_VERSION v1.0.9)
-set(BROTLI_URI https://github.com/google/brotli/archive/refs/tags/${BROTLI_VERSION}.tar.gz)
-set(BROTLI_HASH f9e8d81d0405ba66d181529af42a3354f838c939095ff99930da6aa9cdf6fe46)
-set(BROTLI_HASH_TYPE SHA256)
-set(BROTLI_FILE brotli-${BROTLI_VERSION}.tar.gz)

build_files/build_environment/cmake/vorbis.cmake

@@ -1,25 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_vorbis
-  URL file://${PACKAGE_DIR}/${VORBIS_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${VORBIS_HASH_TYPE}=${VORBIS_HASH}
-  PREFIX ${BUILD_DIR}/vorbis
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/vorbis/src/external_vorbis/ && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/vorbis
-    --disable-shared
-    --enable-static
-    --with-pic
-    --with-ogg=${LIBDIR}/ogg
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/vorbis/src/external_vorbis/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/vorbis/src/external_vorbis/ && make install
-  INSTALL_DIR ${LIBDIR}/vorbis
-)
-
-add_dependencies(
-  external_vorbis
-  external_ogg
-)
-
-if(MSVC)
-  set_target_properties(external_vorbis PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/vpx.cmake

@@ -1,50 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WIN32)
-  if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-    set(VPX_EXTRA_FLAGS --target=x86_64-win64-gcc --disable-multithread)
-  else()
-    set(VPX_EXTRA_FLAGS --target=x86-win32-gcc --disable-multithread)
-  endif()
-else()
-  if(APPLE)
-    if("${CMAKE_OSX_ARCHITECTURES}" STREQUAL "arm64")
-      set(VPX_EXTRA_FLAGS --target=generic-gnu)
-    else()
-      set(VPX_EXTRA_FLAGS --target=x86_64-darwin17-gcc)
-    endif()
-  else()
-    set(VPX_EXTRA_FLAGS --target=generic-gnu)
-  endif()
-endif()
-
-ExternalProject_Add(external_vpx
-  URL file://${PACKAGE_DIR}/${VPX_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${VPX_HASH_TYPE}=${VPX_HASH}
-  PREFIX ${BUILD_DIR}/vpx
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} &&
-    cd ${BUILD_DIR}/vpx/src/external_vpx/ &&
-    ${CONFIGURE_COMMAND_NO_TARGET} --prefix=${LIBDIR}/vpx
-      --disable-shared
-      --enable-static
-      --disable-install-bins
-      --disable-install-srcs
-      --disable-sse4_1
-      --disable-sse3
-      --disable-ssse3
-      --disable-avx
-      --disable-avx2
-      --disable-unit-tests
-      --disable-examples
-      --enable-vp8
-      --enable-vp9
-      ${VPX_EXTRA_FLAGS}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/vpx/src/external_vpx/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/vpx/src/external_vpx/ && make install
-  INSTALL_DIR ${LIBDIR}/vpx
-)
-
-if(MSVC)
-  set_target_properties(external_vpx PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/wayland_protocols.cmake

@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_wayland_protocols
-  URL file://${PACKAGE_DIR}/${WL_PROTOCOLS_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${WL_PROTOCOLS_HASH_TYPE}=${WL_PROTOCOLS_HASH}
-  PREFIX ${BUILD_DIR}/wayland-protocols
-  CONFIGURE_COMMAND meson --prefix ${LIBDIR}/wayland-protocols . ../external_wayland_protocols -Dtests=false
-  BUILD_COMMAND ninja
-  INSTALL_COMMAND ninja install
-)

build_files/build_environment/cmake/webp.cmake

@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-# Note the utility apps may use png/tiff/gif system libraries, but the
-# library itself does not depend on them, so should give no problems.
-
-set(WEBP_EXTRA_ARGS
-  -DWEBP_HAVE_SSE2=ON
-  -DWEBP_HAVE_SSE41=OFF
-  -DWEBP_HAVE_AVX2=OFF
-)
-
-if(WIN32)
-  set(WEBP_BUILD_DIR ${BUILD_MODE}/)
-else()
-  set(WEBP_BUILD_DIR)
-endif()
-
-ExternalProject_Add(external_webp
-  URL file://${PACKAGE_DIR}/${WEBP_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${WEBP_HASH_TYPE}=${WEBP_HASH}
-  PREFIX ${BUILD_DIR}/webp
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/webp -Wno-dev ${DEFAULT_CMAKE_FLAGS} ${WEBP_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/webp
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_webp after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/webp ${HARVEST_TARGET}/webp
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/x264.cmake

@@ -1,44 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WIN32)
-  set(X264_EXTRA_ARGS --enable-win32thread --cross-prefix=${MINGW_HOST}- --host=${MINGW_HOST})
-endif()
-
-if(BLENDER_PLATFORM_ARM)
-  set(X264_EXTRA_ARGS ${X264_EXTRA_ARGS} "--disable-asm")
-endif()
-
-if((APPLE AND NOT BLENDER_PLATFORM_ARM) OR (UNIX AND NOT APPLE))
-  set(X264_CONFIGURE_ENV
-    export AS=${LIBDIR}/nasm/bin/nasm
-  )
-else()
-  set(X264_CONFIGURE_ENV echo .)
-endif()
-
-ExternalProject_Add(external_x264
-  URL file://${PACKAGE_DIR}/${X264_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${X264_HASH_TYPE}=${X264_HASH}
-  PREFIX ${BUILD_DIR}/x264
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && ${X264_CONFIGURE_ENV} && cd ${BUILD_DIR}/x264/src/external_x264/ &&
-    ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/x264
-    --enable-static
-    --enable-pic
-    --disable-lavf
-    ${X264_EXTRA_ARGS}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/x264/src/external_x264/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/x264/src/external_x264/ && make install
-  INSTALL_DIR ${LIBDIR}/x264
-)
-
-if(MSVC)
-  set_target_properties(external_x264 PROPERTIES FOLDER Mingw)
-endif()
-
-if(UNIX)
-  add_dependencies(
-    external_x264
-    external_nasm
-  )
-endif()

build_files/build_environment/cmake/xml2.cmake

@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_xml2
-  URL file://${PACKAGE_DIR}/${XML2_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${XML2_HASH_TYPE}=${XML2_HASH}
-  PREFIX ${BUILD_DIR}/xml2
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/xml2/src/external_xml2/ && ${CONFIGURE_COMMAND}
-    --prefix=${LIBDIR}/xml2
-    --disable-shared
-    --enable-static
-    --with-pic
-    --with-python=no
-    --with-lzma=no
-    --with-zlib=no
-    --with-iconv=no
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/xml2/src/external_xml2/ && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/xml2/src/external_xml2/ && make install
-  INSTALL_DIR ${LIBDIR}/xml2
-)

build_files/build_environment/cmake/xr_openxr.cmake

@@ -1,44 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-
-# Keep flags in sync with install_deps.sh ones in compile_XR_OpenXR_SDK()
-set(XR_OPENXR_SDK_EXTRA_ARGS
-  -DBUILD_FORCE_GENERATION=OFF
-  -DBUILD_LOADER=ON
-  -DDYNAMIC_LOADER=OFF
-)
-
-if(UNIX AND NOT APPLE)
-  list(APPEND XR_OPENXR_SDK_EXTRA_ARGS
-    -DBUILD_WITH_WAYLAND_HEADERS=OFF
-    -DBUILD_WITH_XCB_HEADERS=OFF
-    -DBUILD_WITH_XLIB_HEADERS=ON
-    -DBUILD_WITH_SYSTEM_JSONCPP=OFF
-    -DCMAKE_CXX_FLAGS=-DDISABLE_STD_FILESYSTEM=1
-  )
-endif()
-
-ExternalProject_Add(external_xr_openxr_sdk
-  URL file://${PACKAGE_DIR}/${XR_OPENXR_SDK_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${XR_OPENXR_SDK_HASH_TYPE}=${XR_OPENXR_SDK_HASH}
-  PREFIX ${BUILD_DIR}/xr_openxr_sdk
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/xr_openxr_sdk ${DEFAULT_CMAKE_FLAGS} ${XR_OPENXR_SDK_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/xr_openxr_sdk
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_xr_openxr_sdk after_install
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/xr_openxr_sdk/include/openxr ${HARVEST_TARGET}/xr_openxr_sdk/include/openxr
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/xr_openxr_sdk/lib ${HARVEST_TARGET}/xr_openxr_sdk/lib
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_xr_openxr_sdk after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/xr_openxr_sdk/lib/openxr_loaderd.lib ${HARVEST_TARGET}/xr_openxr_sdk/lib/openxr_loaderd.lib
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/cmake/xvidcore.cmake

@@ -1,28 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-if(WIN32)
-  set(XVIDCORE_EXTRA_ARGS --host=${MINGW_HOST})
-endif()
-
-ExternalProject_Add(external_xvidcore
-  URL file://${PACKAGE_DIR}/${XVIDCORE_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${XVIDCORE_HASH_TYPE}=${XVIDCORE_HASH}
-  PREFIX ${BUILD_DIR}/xvidcore
-  CONFIGURE_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/xvidcore/src/external_xvidcore/build/generic && ${CONFIGURE_COMMAND} --prefix=${LIBDIR}/xvidcore ${XVIDCORE_EXTRA_ARGS}
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/xvidcore/src/external_xvidcore/build/generic && make -j${MAKE_THREADS}
-  INSTALL_COMMAND ${CONFIGURE_ENV} &&
-  ${CMAKE_COMMAND} -E remove ${LIBDIR}/xvidcore/lib/* && # clean because re-installing fails otherwise
-  cd ${BUILD_DIR}/xvidcore/src/external_xvidcore/build/generic && make install
-  INSTALL_DIR ${LIBDIR}/xvidcore
-)
-
-ExternalProject_Add_Step(external_xvidcore after_install
-  COMMAND ${CMAKE_COMMAND} -E rename ${LIBDIR}/xvidcore/lib/xvidcore.a ${LIBDIR}/xvidcore/lib/libxvidcore.a || true
-  COMMAND ${CMAKE_COMMAND} -E remove ${LIBDIR}/xvidcore/lib/xvidcore.dll.a
-  DEPENDEES install
-)
-
-if(MSVC)
-  set_target_properties(external_xvidcore PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/yamlcpp.cmake

@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(YAMLCPP_EXTRA_ARGS
-  -DYAML_CPP_BUILD_TESTS=OFF
-  -DYAML_CPP_BUILD_TOOLS=OFF
-  -DYAML_CPP_BUILD_CONTRIB=OFF
-)
-
-if(WIN32)
-  set(YAMLCPP_EXTRA_ARGS
-    ${YAMLCPP_EXTRA_ARGS}
-    -DBUILD_GMOCK=OFF
-    -DYAML_MSVC_SHARED_RT=ON)
-endif()
-
-ExternalProject_Add(external_yamlcpp
-  URL file://${PACKAGE_DIR}/${YAMLCPP_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${YAMLCPP_HASH_TYPE}=${YAMLCPP_HASH}
-  PREFIX ${BUILD_DIR}/yamlcpp
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/yamlcpp ${DEFAULT_CMAKE_FLAGS} ${YAMLCPP_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/yamlcpp
-)

build_files/build_environment/cmake/zlib.cmake

@@ -1,30 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_zlib
-  URL file://${PACKAGE_DIR}/${ZLIB_FILE}
-  URL_HASH ${ZLIB_HASH_TYPE}=${ZLIB_HASH}
-  PREFIX ${BUILD_DIR}/zlib
-  CMAKE_ARGS -DCMAKE_POSITION_INDEPENDENT_CODE=ON -DCMAKE_INSTALL_PREFIX=${LIBDIR}/zlib ${DEFAULT_CMAKE_FLAGS}
-  INSTALL_DIR ${LIBDIR}/zlib
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_zlib after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/zlib/lib/zlibstatic${LIBEXT} ${HARVEST_TARGET}/zlib/lib/libz_st${LIBEXT}
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/zlib/include/ ${HARVEST_TARGET}/zlib/include/
-      DEPENDEES install
-    )
-  endif()
-  if(BUILD_MODE STREQUAL Debug)
-    ExternalProject_Add_Step(external_zlib after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/zlib/lib/zlibstaticd${LIBEXT} ${HARVEST_TARGET}/zlib/lib/libz_st_d${LIBEXT}
-    DEPENDEES install
-    )
-  endif()
-else()
-  ExternalProject_Add_Step(external_zlib after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/zlib/lib/libz.a ${LIBDIR}/zlib/lib/libz_pic.a
-    DEPENDEES install
-  )
-endif()

build_files/build_environment/cmake/zlib_mingw.cmake

@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-ExternalProject_Add(external_zlib_mingw
-  URL file://${PACKAGE_DIR}/${ZLIB_FILE}
-  URL_HASH ${ZLIB_HASH_TYPE}=${ZLIB_HASH}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  PREFIX ${BUILD_DIR}/zlib_mingw
-  CONFIGURE_COMMAND echo .
-  BUILD_COMMAND ${CONFIGURE_ENV} && cd ${BUILD_DIR}/zlib_mingw/src/external_zlib_mingw/ && make -f win32/makefile.gcc -j${MAKE_THREADS}
-  INSTALL_COMMAND echo .
-  INSTALL_DIR ${LIBDIR}/zlib_mingw
-)
-
-if(BUILD_MODE STREQUAL Release)
-  ExternalProject_Add_Step(external_zlib_mingw after_install
-    COMMAND ${CMAKE_COMMAND} -E copy ${BUILD_DIR}/zlib_mingw/src/external_zlib_mingw/libz.a ${LIBDIR}/zlib/lib/z.lib
-    DEPENDEES install
-  )
-endif()
-
-if(MSVC)
-  set_target_properties(external_zlib_mingw PROPERTIES FOLDER Mingw)
-endif()

build_files/build_environment/cmake/zstd.cmake

@@ -1,35 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-set(ZSTD_EXTRA_ARGS
-  -DZSTD_BUILD_PROGRAMS=OFF
-  -DZSTD_BUILD_SHARED=OFF
-  -DZSTD_BUILD_STATIC=ON
-  -DZSTD_BUILD_TESTS=OFF
-  -DZSTD_LEGACY_SUPPORT=OFF
-  -DZSTD_LZ4_SUPPORT=OFF
-  -DZSTD_LZMA_SUPPORT=OFF
-  -DZSTD_MULTITHREAD_SUPPORT=ON
-  -DZSTD_PROGRAMS_LINK_SHARED=OFF
-  -DZSTD_USE_STATIC_RUNTIME=OFF
-  -DZSTD_ZLIB_SUPPORT=OFF
-)
-
-ExternalProject_Add(external_zstd
-  URL file://${PACKAGE_DIR}/${ZSTD_FILE}
-  DOWNLOAD_DIR ${DOWNLOAD_DIR}
-  URL_HASH ${ZSTD_HASH_TYPE}=${ZSTD_HASH}
-  PREFIX ${BUILD_DIR}/zstd
-  SOURCE_SUBDIR build/cmake
-  CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/zstd ${DEFAULT_CMAKE_FLAGS} ${ZSTD_EXTRA_ARGS}
-  INSTALL_DIR ${LIBDIR}/zstd
-)
-
-if(WIN32)
-  if(BUILD_MODE STREQUAL Release)
-    ExternalProject_Add_Step(external_zstd after_install
-      COMMAND ${CMAKE_COMMAND} -E copy ${LIBDIR}/zstd/lib/zstd_static${LIBEXT} ${HARVEST_TARGET}/zstd/lib/zstd_static${LIBEXT}
-      COMMAND ${CMAKE_COMMAND} -E copy_directory ${LIBDIR}/zstd/include/ ${HARVEST_TARGET}/zstd/include/
-      DEPENDEES install
-    )
-  endif()
-endif()

build_files/build_environment/dependencies.dot

@@ -1,100 +0,0 @@
-strict graph {
-graph[autosize = false, size = "25.7,8.3!", resolution = 300, overlap = false, splines = false, outputorder=edgesfirst ];
-	node [style=filled fillcolor=white];
-	external_alembic -- external_boost;
-	external_alembic -- external_zlib;
-	external_alembic -- external_openexr;
-	external_blosc -- external_zlib;
-	external_blosc -- external_pthreads;
-	external_boost -- Make_Python_Environment;
-	external_clang -- ll;
-	external_ffmpeg -- external_zlib;
-	external_ffmpeg -- external_faad;
-	external_ffmpeg -- external_openjpeg;
-	external_ffmpeg -- external_xvidcore;
-	external_ffmpeg -- external_x264;
-	external_ffmpeg -- external_vpx;
-	external_ffmpeg -- external_theora;
-	external_ffmpeg -- external_vorbis;
-	external_ffmpeg -- external_ogg;
-	external_ffmpeg -- external_lame;
-	external_ffmpeg -- external_zlib_mingw;
-	external_numpy -- Make_Python_Environment;
-	external_opencollada -- external_xml2;
-	external_opencolorio -- external_boost;
-	external_opencolorio -- external_tinyxml;
-	external_opencolorio -- external_yamlcpp;
-	external_openexr -- external_zlib;
-	external_openimageio -- external_png;
-	external_openimageio -- external_zlib;
-	external_openimageio -- external_openexr;
-	external_openimageio -- external_openexr;
-	external_openimageio -- external_jpeg;
-	external_openimageio -- external_boost;
-	external_openimageio -- external_tiff;
-	external_openimageio -- external_opencolorio;
-	external_openimageio -- external_openjpeg;
-	external_openimageio -- external_webp;
-	external_openimageio -- external_opencolorio_extra;
-	external_openmp -- external_clang;
-	external_opensubdiv -- external_glew;
-	external_opensubdiv -- external_glfw;
-	external_opensubdiv -- external_clew;
-	external_opensubdiv -- external_cuew;
-	external_opensubdiv -- external_tbb;
-	openvdb -- external_tbb;
-	openvdb -- external_boost;
-	openvdb -- external_openexr;
-	openvdb -- external_openexr;
-	openvdb -- external_zlib;
-	openvdb -- external_blosc;
-	external_osl -- external_boost;
-	external_osl -- ll;
-	external_osl -- external_clang;
-	external_osl -- external_openexr;
-	external_osl -- external_openexr;
-	external_osl -- external_zlib;
-	external_osl -- external_flexbison;
-	external_osl -- external_openimageio;
-	external_osl -- external_pugixml;
-	external_png -- external_zlib;
-	external_python_site_packages -- Make_Python_Environment;
-	external_sndfile -- external_ogg;
-	external_sndfile -- external_vorbis;
-	external_sndfile -- external_flac;
-	external_theora -- external_vorbis;
-	external_theora -- external_ogg;
-	external_tiff -- external_zlib;
-	external_vorbis -- external_ogg;
-	blender-- external_ffmpeg;
-	blender-- external_alembic;
-	blender-- external_openjpeg;
-	blender-- external_opencolorio;
-	blender-- external_openexr;
-	blender-- external_opensubdiv;
-	blender-- openvdb;
-	blender-- external_osl;
-	blender-- external_boost;
-	blender-- external_jpeg;
-	blender-- external_png;
-	blender-- external_python;
-	blender-- external_sndfile;
-	blender-- external_iconv;
-	blender-- external_fftw3;
-	external_python-- external_python_site_packages;
-	external_python_site_packages-- requests;
-	external_python_site_packages-- idna;
-	external_python_site_packages-- chardet;
-	external_python_site_packages-- urllib3;
-	external_python_site_packages-- certifi;
-	external_python-- external_numpy;
-	external_usd-- external_boost;
-	external_usd-- external_tbb;
-	blender-- external_opencollada;
-	blender-- external_sdl;
-	blender-- external_freetype;
-	blender-- external_pthreads;
-	blender-- external_zlib;
-	blender-- external_openal;
-    blender-- external_usd;
-}

build_files/build_environment/install_deps_patches/llvm.patch

@@ -0,0 +1,11 @@
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -14,7 +14,7 @@
+ set(LLVM_VERSION_MINOR 4)
+ 
+ if (NOT PACKAGE_VERSION)
+-  set(PACKAGE_VERSION "${LLVM_VERSION_MAJOR}.${LLVM_VERSION_MINOR}svn")
++  set(PACKAGE_VERSION "${LLVM_VERSION_MAJOR}.${LLVM_VERSION_MINOR}")
+ endif()
+ 
+ option(LLVM_INSTALL_TOOLCHAIN_ONLY "Only include toolchain files in the 'install' target." OFF)

build_files/build_environment/install_deps_patches/osl.patch

@@ -0,0 +1,12 @@
+--- a/src/shaders/CMakeLists.txt
++++ b/src/shaders/CMakeLists.txt
+@@ -27,7 +27,7 @@ macro (osl_compile oslsrc objlist headers)
+         message (STATUS "cmd: ${CMAKE_CURRENT_BINARY_DIR}/../oslc/oslc ${oslsrc}")
+     endif ()
+     add_custom_command (OUTPUT ${osofile}
+-        COMMAND "${CMAKE_CURRENT_BINARY_DIR}/../oslc/oslc" ${oslsrc}
++        COMMAND "${CMAKE_CURRENT_BINARY_DIR}/../oslc/oslc" "-o" ${osofile} ${oslsrc}
+         MAIN_DEPENDENCY ${oslsrc}
+         DEPENDS ${${headers}} ${oslsrc} "${CMAKE_CURRENT_BINARY_DIR}/stdosl.h" "${CMAKE_CURRENT_BINARY_DIR}/../oslc/oslc"
+         WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR})
+

build_files/build_environment/patches/.gitattributes

@@ -1,2 +0,0 @@
-# Files contains mixed line endings, patch needs to preserve them to apply.
-opencollada.diff binary