Summary:
Depends on D20629. Ref T4900. Currently, the "Advanced Filter..." workflow on workboards (where you build a custom query) is inline in the main board controller.
This is because the filter flow depends on some of the board view state: we want to start with the current filter applied to the board, and preserve other state after you change the filter.
Now that `ViewState` can handle state management, we can separate this stuff out pretty easily.
Test Plan:
- Changed filters on a board.
- Applied a custom filter to a board.
- Changed the ordering of a board, then applied a custom filter. Verified "Cancel" and "Apply Filter" both preserve the order state.
- Changed the ordering of a board, then applied a custom filter, intentionally making a mistake in configuring the filter by entering an invalid date. Saw a dialog with an error. After correcting the error, saw state preserved properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20632
Summary:
Depends on D20628. Ref T4900. Currently, the "Save Current Order/Filter As Default" flows on workboards duplicate some state construction, and require parameters to be passed to them explicitly.
Now that state management is separate, they can reuse a bit more code and be made to look more like other similar controllers.
Test Plan:
- Changed the default order of a workboard.
- Changed the default filter of a workboard.
- Changed the order of a board to something non-default, then changed the filter, then saved the new filter as the default. Saw the modified order preserved and the modified filter removed, so I ended up in the right ("most correct") place: on the board, with my custom order in a URI parameter, and no filter URI parameter so I could see my new default filter behavior. This is an edge case that's not terribly important to get right, but we do get it right.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20629
Summary:
Depends on D20627. Ref T4900. If a user orders a board by "Sort by Title", then toggles the visibility of hidden columns, we want to keep the board sorted by title. To accomplish this, we pass the board state around to all the workflows here.
Pull the "bag of state properties" code out of the View controller. This class basically:
- reads state from a request (order, hidden, filter);
- manages defaults;
- provides the application with the current settings; and
- generates URIs with "?order=X&hidden=Y&filter=Z" to preserve state.
This is still a little questionable/transitional since some of the controllers need more cleanup.
Test Plan:
Toggled state, order, filters, clicked around various workflows and saw the filters preserved.
A lot of these workflows are pretty serious edge cases. For example, here's a feature this implements:
- Changed workboard order to "Title".
- Selected "Bulk Edit Tasks..." in an empty column and command-clicked it to open the link in a new window.
- Hovered over "Cancel".
- Saw the link properly generate with "?order=title", preserving the order.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20628
Summary: Depends on D20626. Ref T4900. On this controller, "id" is a separate property, but serves little purpose and complicates separating state management. Remove it.
Test Plan: Bulk edited a column, managed filters, did show/hide on columns, edited a column.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20627
Summary:
Ref T4900. The Workboard view controller currently has a lot of different responsibilities (it's ~1,500 lines long) because it has to manage the board filter/sort state.
I'd like to split it up and make it easier to move some workboard features (like "move all tasks in column...") to other Controllers, so we can have smaller controllers implementing specific workflows.
I think the state handling isn't really all that bad, it just needs to be separated a little better than it currently is.
To start with, remove the unused "slug" property.
Test Plan: Searched for "slug", got no hits. This class is final and the property is private, so this is certainly unused.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20626
Summary:
Ref T13279. For now, we need to render burndowns from both Maniphest (legacy) and Projects (new prototype).
Consolidate this logic into a "BurndownChartEngine". I plan to expand this to work a bit like a "SearchEngine", and serve as a UI layer on top of the raw chart features.
The old "ChartEngine" is now "ChartRenderingEngine".
Test Plan:
- Viewed burndowns ("burnups") in Maniphest.
- Viewed burndowns in Projects.
- Saw the same chart.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20496
Summary:
Ref T13279. Since the use cases that have made it upstream are all for relatively complex charts (e.g., requiring aggregation and composition of multiple data series in nontrivial ways) I'm currently looking at an overall approach like this:
- At least for now, Charts provides a low-level internal-only API for composing charts from raw datasets.
- This is exposed to users through pre-built `SearchEngine`-like interfaces that provide a small number of more manageable controls (show chart from date X to date Y, show projects A, B, C), but not the full set of composition features (`compose(scale(2), cos())` and such).
- Eventually, we may put more UI on the raw chart composition stuff and let you build your own fully custom charts by gluing together datasets and functions.
- Or we may add this stuff in piecemeal to the higher-level UI as tools like "add goal line" or "add trend line" or whatever.
This will let the low-level API mature/evolve a bit before users get hold of it directly, if they ever do. Most requests today are likely satisfiable with a small number of chart engines plus raw API data access, so maybe UI access to flexible charting is far away.
Step toward this by adding a "Reports" section to projects. For now, this just renders a basic burnup for the current project. Followups will add an "Engine" layer above this and make the chart it produces more useful.
Test Plan: {F6426984}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20495
Summary:
Depends on D20516. See PHI1247. In D20331, I made the crumbs on workboards point at ancestor workboards.
However, this isn't a great destination if an ancestor doesn't actually have a workboard. In this case, point at the normal profile URI instead.
Test Plan:
- Viewed a milestone workboard with a parent that had no workboard. Saw a profile link instead of a workboard link (new behavior).
- Viewed a milestone workboard with a parent that also had a workboard. Saw a workboard link (existing old behavior still works).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20517
Summary:
See PHI1247. If you remove the Workboard from a project profile menu, then navigate to the URI, we currently fatal when trying to select the "Workboard" item.
Instead, only try to select the item if some matching item is present.
Test Plan:
- Disabled the workboard on a project, navigated to `/board/`, got a sensible page with no navigation item selected instead of a fatal.
- Viewed a normal workboard, saw the correct selection.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20516
Summary: Depends on D20384. Ref T13275. A bunch of this code got converted but I missed some callsites that aren't reached directly from the menu.
Test Plan:
- Visited each controller, saw actual pages instead of menu construction fatals.
- Grepped for `getProfileMenu()`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20385
Summary:
Ref T13269. Workboard triggers can now reassign tasks on column drop. Also sprinkles some `setViewer()` calls in places that needed them.
This mostly works, but a few issues:
* To set the owner to unassigned, you must explicitly put the "No Owner" token in the typeahead. Maybe this should just figure out you've put nothing in that field and set it for you?
* I'm pretty sure this was already broken, but if you change the rule type from a tokenizer to a different type, the default for the field doesn't populate correctly: {F6312227}
Also adds a new hook for trigger rules: `getValueForField($value)` which allows you to transform a value stored in the DB into a form suitable for setting on a form control.
Test Plan: Dragged tasks between columns and observed new owners as expected. Didn't try to get fancy to assign tasks to deleted users, users that the viewer can't see, bot users, etc etc. I'm relying on the underlying transaction to hopefully do the right thing.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20329
Summary:
Depends on D20355. Ref T13275. Ref T13247. Currently, "Hamburger" menus are not automatically built from navigation menus. However, this is (I'm almost completely sure?) a reasonable and appropriate default behavior, and saves us some code around profile menus.
With this rule in place, we can remove `setApplicationMenu()` and `getApplicationMenu()` from `StandardPageView`, since they have no callers.
This also updates a lot of profile menu callsites to a new API which is added in the next change.
Test Plan: See the next two changes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275, T13247
Differential Revision: https://secure.phabricator.com/D20356
Summary:
Depends on D20352. Fixes T12949. If a user adds a link (for example, to a workboard) that takes you to the same page but with some URI parameters, we'd prefer to highlight the "link" item instead of the default "workboard" item when you click it.
For example, you add a `/query/assigned/` "link" item to a workboard, called "Click This To Show Tasks Assigned To Me On This Workboard", i.e. filter the current view.
This is a pretty reasonable thing to want to do. When you click it, we'd like to highlight that item to show that you've activated the "Assigned to Me" filter you added.
However, we currently highlight the thing actually serving the content, i.e. the "Workboard" item.
Instead:
- When picking what to highlight, look through all the items for one with a link to the current request URI.
- If we find one or more, pick the one that would be the default.
- Otherwise, pick the first one.
This means that you can have several items like "?a=1", "?a=2", etc., and we will highlight them correctly when you click them.
This actual patch has some questionable bits (see some discussion in T13275), but I'd like to wait for stronger motivation to refactor it more extensively.
Test Plan:
- On a portal, added a `?a=1` link. Saw it highlight properly when clikced.
- On a workboard, added a link to the board itself with a different filter. Saw it highlight appropriately when clicked.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12949
Differential Revision: https://secure.phabricator.com/D20353
Summary:
Depends on D20349. Ref T13275. Currently, a default item is selected as a side effect of generating the full list of items, for absolutely no reason.
The logic to pick the currently selected item can also be separated out pretty easily.
(And fix a bug in with a weird edge case in projects.)
This doesn't really change anything, but it will probably make T12949 a bit easier to fix.
Test Plan: Viewed Home / projects / portals, clicked various links, got same default/selection behavior as before.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20352
Summary:
Ref T13269. Currently, if you're on a milestone workboard like this:
> Projects > Parent > Milestone > Workboard
The "Parent" link goes to the parent profile. More often, I want it to go to the parent workboard. Try doing that? This is kind of one-off but I suspect it's a better rule.
Also, consolidate one billion manual constructions of "/board/" URIs.
Test Plan: Viewed a milestone workboard, clicked the parent link, ended up on the parent workboard.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20331
Summary:
Depends on D20321. Fixes T12175. Ref T13074. Now that before/after PHIDs are suggestions, we can give the server a more complete view of what the client is trying to do so we're more likely to get a good outcome if the client view is out of date.
Instead of passing only the one directly adjacent card PHID, pass all the card PHIDs that the client thinks are in the same group.
(For gigantic columns with tens of thousands of tasks this might need some tweaking -- like, slice both lists down to 10 items -- but we can cross that bridge when we come to it.)
Test Plan:
- Dragged some cards around to top/bottom/middle positions, saw good positioning in all cases.
- In two windows, dragged stuff around on the same board. At least at first glance, conflicting simultaneous edits seemed to do reasonable things.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074, T12175
Differential Revision: https://secure.phabricator.com/D20322
Summary:
Depends on D20320. Ref T12175. Ref T13074. Currently, when you move a card between columns, the internal transaction takes exactly one `afterPHID` or `beforePHID` and moves the card before or after the specified card.
This is a fairly strict interpretation and causes a number of practical issues, mostly because the user/client view of the board may be out of date and the card they're dragging before or after may no longer exist: another user might have moved or hidden it between the last client update and the current time.
In T13074, we also run into a more subtle issue where a card that incorrectly appears in multiple columns fatals when dropped before or after itself.
In all cases, a better behavior is just to complete the move and accept that the position may not end up exactly like the user specified. We could prompt the user instead:
> You tried to drop this card after card X, but that card has moved since you last loaded the board. Reload the board and try again.
...but this is pretty hostile and probably rarely/never what the user wants.
Instead, accept a list of before/after PHIDs and just try them until we find one that works, or accept a default position if none work. In essentially all cases, this means that the move "just works" like users expect it to instead of fataling in a confusing/disruptive/undesirable (but "technically correct") way.
(A followup will make the client JS send more beforePHIDs/afterPHIDs so this works more often.)
We could eventually add a "strict" mode in the API or something if there's some bot/API use case for precise behavior here, but I suspect none exist today or are (ever?) likely to exist in the future.
Test Plan:
- (T13074) Inserted two conflicting rows to put a card on two columns on the same board. Dropped one version of it underneath the other version. Before: confusing fatal. After: cards merge sensibly into one consistent card.
- (T12175) Opened two views of a board. Moved card A to a different column on the first view. On the second view, dropped card B under card A (still showing in the old column). Before: confusing fatal. After: card ended up in the right column in approximately the right place, very reasonably.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074, T12175
Differential Revision: https://secure.phabricator.com/D20321
Summary:
Ref T5474. In 99% of cases, a separate "archived/active" status for triggers probably doesn't make much sense: there's not much reason to ever disable/archive a trigger explcitly, and the archival rule is really just "is this trigger used by anything?".
(The one reason I can think of to disable a trigger manually is because you want to put something in a column and skip trigger rules, but you can already do this from the task detail page anyway, and disabling the trigger globally is a bad way to accomplish this if it's in use by other columns.)
Instead of adding a separate "status", just track how many columns a trigger is used by and consider it "inactive" if it is not used by any active columns.
Test Plan: This is slightly hard to test exhaustively since you can't share a trigger across multiple columns right now, but: rebuild indexes, poked around the trigger list and trigger details, added/removed triggers.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20308
Summary:
Ref T5474. Allow columns to play a sound when tasks are dropped.
This is a little tricky because Safari has changed somewhat recently to require some gymnastics to play sounds when the user didn't explicitly click something. Preloading the sound on the first mouse interaction, then playing and immediately pausing it seems to work, though.
Test Plan: Added a trigger with 5 sounds. In Safari, Chrome, and Firefox, dropped a card into the column. In all browsers, heard a nice sequence of 5 sounds played one after the other.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20306
Summary:
Ref T5474. The first rough cut of triggers showed some of the trigger rules in a tooltip when you hover over the "add/remove" trigger menu.
This isn't great since we don't have much room and it's a bit finnicky / hard to read.
Since we have a better way to show effects now in the drop preview, just use that instead. When you hover over the trigger menu, preview the trigger in the "drop effect" element, with a "Trigger: such-and-such" header.
Test Plan:
- This is pretty tough to screenshot.
- Hovered over menu, got a sensible preview of the trigger effects.
- Dragged a card over the menu, no preview.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20304
Summary: Ref T5474. When you view the main page for a rule, show what the rule does before you actually edit it.
Test Plan:
Viewed a real trigger, then faked invalid/unknown rules:
{F6300211}
{F6300212}
{F6300213}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20303
Summary:
Ref T5474. This provides a Herald-like UI for editing workboard trigger rules.
This probably has some missing pieces and doesn't actually save anything to the database yet, but the basics at least roughly work.
Test Plan: {F6299886}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20301
Summary:
Ref T10335. When you (for example) drag a "Resolved" task into a column with "Trigger: change status to resolved.", don't show a hint that the action will "Change status to resolved." since this isn't helpful and is somewhat confusing.
For now, the only visibility operator is "!=" since all current actions are simple field comparisons, but some actions in the future (like "add subscriber" or "remove project") might need other conditions.
Test Plan:
Dragged cards in ways that previously provided useless hints: move from column A to column B on a "Group by Priority" board; drag a resolved task to a "Trigger: change status to as resolved" column. Saw a more accurate preview in both cases.
Drags which actually cause effects still show the effects correctly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335
Differential Revision: https://secure.phabricator.com/D20300
Summary:
Ref T10335. Ref T5474. When you drag-and-drop a card on a workboard, show a UI hint which lists all the things that the operation will do.
This shows: column moves; changes because of dragging a card to a different header; and changes which will be caused by triggers.
Not implemented here:
- Actions are currently shown even if they have no effect. For example, if you drag a "Normal" task to a different column, it says "Change priority to Normal.". I plan to hide actions which have no effect, but figuring this out is a little bit tricky.
- I'd like to make "trigger effects" vs "non-trigger effects" a little more clear in the future, probably.
Test Plan:
Dragged stuff between columns and headers, and into columns with triggers. Got appropriate preview text hints previewing what the action would do in the UI.
(This is tricky to take a screenshot of since it only shows up while the mouse cursor is down.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335, T5474
Differential Revision: https://secure.phabricator.com/D20299
Summary: Depends on D20287. Ref T5474. This hard-codes a storage value for every trigger, with a "Change status to <default closed status>" rule and two bogus rules. Rules may now apply transactions when cards are dropped.
Test Plan: Dragged cards to a column with a trigger, saw them close.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20288
Summary:
Depends on D20286. Ref T5474. Attaches triggers to columns and makes "Remove Trigger" work.
(There's no "pick an existing named trigger from a list" UI yet, but I plan to add that at some point.)
Test Plan: Attached and removed triggers, saw column UI update appropriately.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20287
Summary: Depends on D20279. Ref T5474. Modernize these transactions before I add a new "TriggerTransaction" for setting triggers.
Test Plan: Created a column. Edited a column name and point limit. Hid and un-hid a column. Grepped for removed symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20286
Summary:
Depends on D20278. Ref T5474. This change creates some new empty objects that do nothing, and some new views for looking at those objects. There's no actual useful behavior yet.
The "Edit" controller is custom instead of being driven by "EditEngine" because I expect it to be a Herald-style "add new rules" UI, and EditEngine isn't a clean match for those today (although maybe I'll try to move it over).
The general idea here is:
- Triggers are "real" objects with a real PHID.
- Each trigger has a name and a collection of rules, like "Change status to: X" or "Play sound: Y".
- Each column may be bound to a trigger.
- Multiple columns may share the same trigger.
- Later UI refinements will make the cases around "copy trigger" vs "reference the same trigger" vs "create a new ad-hoc trigger" more clear.
- Triggers have their own edit policy.
- Triggers are always world-visible, like Herald rules.
Test Plan: Poked around, created some empty trigger objects, and nothing exploded. This doesn't actually do anything useful yet since triggers can't have any rule behavior and columns can't actually be bound to triggers.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20279
Summary:
Ref T13074. Currently, if you "Move Tasks to Column..." on a board and some of the tasks require MFA to edit, the workflow fatals out.
After this change, it works properly. You still have to answer a separate MFA prompt for //each// task, which is a little ridiculous, but at least doable. A reasonable future refinement would be to batch these MFA prompts, but this is currently the only use case for that.
Test Plan: Set a task to a "Require MFA" status, bulk-moved it with other tasks on a workboard. Was prompted, answered MFA prompt, got a move.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20282
Summary: Depends on D20275. Fixes T10578. This is a static sorting (like "By Date Created") where you can't change point values by dragging. You can still drag cards between columns, or use the "Edit" icon to change point values.
Test Plan: {F6265191}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10578
Differential Revision: https://secure.phabricator.com/D20276
Summary:
Depends on D20274. Ref T10578. This is en route to an ordering by points, it's just a simpler half-step on the way there.
Allow columns to be sorted by creation date, so the newest tasks rise to the top.
In this ordering you can never reposition cards, since editing a creation date by dragging makes no sense. This will be true of the "points" ordering too (although we could imagine doing something like prompting the user, some day).
Test Plan: Viewed boards by "natural" (allows reordering both when dragging within and between columns), "priority" (reorder only within columns), and "creation date" (reorder never). Dragged cards around between and within columns, got apparently sensible behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10578
Differential Revision: https://secure.phabricator.com/D20275
Summary: Depends on D20272. Ref T13074. When a task requires MFA to edit, you currently get a fatal. Provide a cancel URI so the prompt works and the edit can go through.
Test Plan:
- Locked a task, dragged it on a workboard.
- Before: fatal trying to build an MFA gate.
- After: got MFA gated, answered prompt, action went through.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20273
Summary:
Depends on D20267. Depends on D20268. Ref T10333. Currently, we support "Natural" and "Priority" orders, but a lot of the particulars are pretty hard-coded, including some logic in `ManiphestTask`.
Although it's not clear that we'll ever put other types of objects on workboards, it seems generally bad that you need to modify `ManiphestTask` to get a new ordering.
Pull the ordering logic out into a `ProjectColumnOrder` hierarchy instead, and let each ordering define the things it needs to work (name, icon, what headers look like, how different objects are sorted, and how to apply an edit when you drop an object under a header).
Then move the existing "Natural" and "Priority" orders into this new hierarchy.
This has a minor bug where using the "Edit" workflow to change a card's priority on a priority-ordered board doesn't fully refresh card/header order since the response isn't ordering-aware. I'll fix that in an upcoming change.
Test Plan: Grouped workboards by "Natural" and "Priority", dragged stuff around within and between columns, grepped for all touched symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20269
Summary:
Depends on D20263. Ref T10333. I want to add groups like "Assignee" to workboards. This means you may have several tasks grouped under, say, "Alice".
When you drag the bottom-most task under "Alice" to the top, what does that mean?
Today, the only grouping is "Priority", and it means "change the task's secret/hidden global subpriority". However, this seems to generally be a somewhat-bad answer, and is quite complex. It also doesn't make much sense for an author grouping, since one task can't really be "more assigned" to Alice than another task.
Users likely intend this operation to mean "move it, visually, with no other effects" -- that is, user intent is to shuffle sticky notes around on a board, not edit anything substantive. The meaning is probably something like "this is similar to other nearby tasks" or "maybe this is a good place to start", which we can't really capture with any top-level attribute.
We could extend "subpriority" and give tasks a secret/hidden "sub-assignment strength" and so on, but this seems like a bad road to walk down. We'll also run into trouble later when subproject columns may appear on the board, and a user could want to put a task in different positions on different subprojects, conceivably.
In the "Natural" order view, we already have what is probably a generally better approach for this: a task display order particular to the column, that just remembers where you put the sticky notes.
Move away from "subpriority", and toward a world where we mostly keep sticky notes where you stuck them and move them around only when we have to. With no grouping, we still sort by "natural" order, as before. With priority grouping, we now sort by `<priority, natural>`. When you drag stuff around inside a priority group, we update the natural order.
This means that moving cards around on a "priority" board will also move them around on a "natural" board, at least somewhat. I think this is okay. If it's not intuitive, we could give every ordering its own separate "natural" view, so we remember where you stuck stuff on the "priority" board but that doesn't affect the "Natural" board. But I suspect we won't need to.
Test Plan:
- Viewed and dragged a natural board.
- Viewed and dragged a priority board.
- Dragged within and between groups of 0, 1, and multiple items.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20265
Summary:
Ref T10333. Ref T8135. Depends on D20247. Allow users to drag-and-drop cards on a priority-sorted workboard under headers, even if the header has no other cards.
As of D20247, headers show up but they aren't really interactive. Now, you can drag cards directly underneath a header (instead of only between other cards). For example, if a column has only one "Wishlist" task, you may drag it under the "High", "Normal", or "Low" priority headers to select a specific priority.
(Some of this code still feels a little rough, but I think it will generalize once other types of sorting are available.)
Test Plan: Dragged cards within and between priority groups, saw appropriate priority edits applied in every case I could come up with.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333, T8135
Differential Revision: https://secure.phabricator.com/D20248
Summary:
Ref T10333. When workboards are ordered (for example, by priority), add headers to the various groups. Major goals are:
- Allow users to drag-and-drop to set values that no cards currently have: for example, you can change a card priority to "normal" by dragging it under the "normal" header, even if no other cards in the column are currently "Normal".
- Make future orderings more useful, particularly "order by assignee". We don't really have room to put the username on every card and it would create a fair amount of clutter, but we can put usernames in these headers and then reference them with just the profile picture. This also allows you to assign to users who are not currently assigned anything in a given column.
- Make the drag-and-drop behavior more obvious by showing what it will do more clearly (see T8135).
- Make things a little easier to scan in general: because space on cards is limited, some information isn't conveyed very clearly (for example, priority information is currently conveyed //only// through color, which can be hard to pick out visually and is probably not functional for users who need vision accommodations).
- Maybe do "swimlanes": this is pretty much a "swimlanes" UI if we add whitespace at the bottom of each group so that the headers line up across all the columns (e.g., "Normal" is at the same y-axis position in every column as you scroll down the page). Not sold on this being useful, but it's just a UI adjustment if we do want to try it.
NOTE: This only makes these headers work for display.
They aren't yet recognized as targets by the drag list UI, so you can't drag cards into an empty group. I'll tackle that in a followup.
Test Plan: {F6257686}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20247
Summary: Ref T13250. See D20149. Mostly: clarify semantics. Partly: remove magic "null" behavior.
Test Plan: Poked around, but mostly just inspection since these are pretty much one-for-one.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20154
Summary:
Ref T13242. See PHI1039. Maniphest subtypes generally seem to be working well. I designed them as a general capability that might be extended to other `EditEngine` objects later, and PHI1039 describes a situation where extending subtypes to projects would give us some reasonable tools.
(Some installs also already use icons/colors as a sort of lightweight version of subtypes, so I believe this is generally useful capability.)
Some of this is a little bit copy-pasted and could probably be shared, but I'd like to wait a bit longer before merging it. For example, both configs have exactly the same structure right now, but Projects should possibly have some different flags (for example: to disable creating subprojects / milestones).
This implementation is pretty basic for now: notably, subprojects/milestones don't get the nice "choose from among subtype forms" treatment that tasks do. If this ends up being part of a solution to PHI1039, I'd plan to fill that in later on.
Test Plan: Defined multiple subtypes, created subtype forms, created projects with appropriate subtypes. Filtered them by subtype. Saw subtype information on list/detail views.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13242
Differential Revision: https://secure.phabricator.com/D20040
Summary:
See PHI1025. When you "Import Columns", we test if you're trying to import into a board that already has columns. However, this test is too broad (it incorrectly detects "proxy" columns for milestones as columns) and not user-friendly (it returns 400 instead of a readable error).
Correct these issues, and refine some of the logic around proxy columns.
Test Plan:
- Created a project, A.
- Created a milestone under that project.
- Imported another project's columns to A's workboard.
- Before change: Unhelpful 400.
- After change: import worked fine.
- Also, hit the new error dialogs and read through them.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19978
Summary:
Fixes T13208. See that task for details.
The `clone $query` line is safe if `$query` is a builtin query (like "open").
However, if it's a saved query we clone not only the query parameters but the ID, too. Then when we `save()` the query later, we overwrite the original query.
So this would happen in the database. First, you run a query and save it as the workboard default (query key "abc123"):
| 123 | abc123 | {"...xxx..."} |
Then we `clone` it and change the parameters, and `save()` it. But that causes an `UPDATE ... WHERE id = 123` and the table now looks like this:
| 123 | def456 | {"...yyy..."} |
What we want is to create a new query instead, with an `INSERT ...`:
| 123 | abc123 | {"...xxx..."} |
| 124 | def456 | {"...yyy..."} |
Test Plan:
- Followed reproduction steps from above.
- With just the new `save()` guard, hit the guard error.
- With the `newCopy()`, got a new copy of the query and "View as Query" remained functional without overwriting the original query row.
- Ran migration, saw an affected board get fixed.
Reviewers: amckinley, joshuaspence
Reviewed By: joshuaspence
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13208
Differential Revision: https://secure.phabricator.com/D19768
Summary:
Depends on D19550. Ref T13164. See T12144#226172, mostly. We get some requests to make milestones reorderable, but in most cases users probably wanted subprojects, not milestones.
One reason to end up here is that we put "Milestones" on top. Instead, put "Subprojects" on top, since they're the less specialized option and we aren't terribly consistent about it anyway.
Test Plan: Viewed project subprojects page, saw "Subprojects" above "Milestones".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19551
Summary:
Ref T13120. See PHI571. Fixes T5024. This adds a "View as Query" action to workboard columns, which builds a query in Maniphest that has the current query constraints plus an additional constraint to select only tasks in the specified column.
This is a normal query and can be turned into a dashboard panel, added to a menu, edited, saved as a link, etc.
Much of the complexity here is that finding tasks in a given column isn't entirely straightforward because of how board layout works: when you create a task, it isn't immediately placed in columns. It's only actually added to the "Backlog" column on any boards when someone looks at the board.
To get the right behavior, we must do "board layout" for any queried columns before we can constrain results. This isn't enormously efficient, but should be OK for reasonable boards.
Test Plan:
- Used "View as Query" for normal columns and milestome columns, got appropriate queries in Maniphest.
- Applied filters to the board (e.g., "Priorities: wishlist"), then used "View As Query" and had my custom filters respected.
- Queried some large boards/columns with more than a thousand tasks, got results back within a second or so.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T5024
Differential Revision: https://secure.phabricator.com/D19366
Summary:
Depends on D18805. Ref T13025. Fixes T10268.
Instead of using a list of IDs for the bulk editor, power it with SearchEngine queries. This gives us the full power of SearchEngine and lets us use a query key instead of a list of 20,000 IDs to avoid issues with URL lengths.
Also, split it into a base `BulkEngine` and per-application subclasses. This moves us toward T10005 and universal support for bulk operations.
Also:
- Renames most of "batch" to "bulk": we're curently inconsitent about this, I like "bulk" better since I think it's more clear if you don't regularly interact with `.bat` files, and newer stuff mostly uses "bulk".
- When objects in the result set can't be edited because you don't have permission, show the status more clearly.
This probably breaks some stuff a bit since I refactored so heavily, but it seems mostly OK from poking around. I'll clean up anything I missed in followups to deal with remaining items on T13025.
Test Plan:
{F5302300}
- Bulk edited from Maniphest.
- Bulk edited from a workboard (no more giant `?ids=....` in the URL).
- Hit most of the error conditions, I think?
- Clicked the "Cancel" button.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10268
Differential Revision: https://secure.phabricator.com/D18806
Summary:
Fixes T13033. Currently (prior to D18836) all the default items for projects can be hidden. When this occurs, the main project page fatals.
If we fix the fatal narrowly (don't try to call `null->getBuiltinKey()` when `$default` is `null`), it would 404, which is a little better but not by much.
After D18836 you can't hide "Profile", which is pretty sensible, and effectively fixes this. This change doubles down: let "Manage" be a default, and send the user there if we can't find a different default.
Ideally, the MenuEngine itself will do more rendering eventually (as it does for some of the newer Home stuff) and could handle this defaulting behavior with less special casing, but we'd still end up in a similar situation if a project had only one "Link" item to "coolcats.com" or something: redirecting the user to "coolcats.com" is probably better than fataling, but not by a huge margin, and not likely to be what they expect.
Test Plan:
Before D18836, disabled both "Profile" and "Workboard" items on a project. Visited project page.
Before patch: fatal. After patch: manage page.
After D18836, you can't do this and just get the profile, so this is sort of moot and mostly future-proofing/for-completeness.
Reviewers: 20after4, amckinley
Reviewed By: amckinley
Maniphest Tasks: T13033
Differential Revision: https://secure.phabricator.com/D18843
Summary:
See PHI94. I considered this initially but wasn't sure about it. However, PHI94 brings up the good point that we already use a similar rule in Maniphest.
For consistency, only show visible columns here too.
Test Plan: Used "Move tasks to column..." on a board with visible and hidden columns, only saw visbile columns offered in the dropdown.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18668
Summary:
Ref T5523. See PHI50. See PHI40. This isn't perfect, but should improve things.
Add a "Move tasks to column..." action to workboards which moves all visible tasks in a column to another column, either on the same board or on a different board.
This is a two-step process so that I don't have to write Javascript, and because I'm not 100% sure this is what users actually want/need. If it sticks, the UI could be refined later.
- The first dialog asks you to choose a project, defaulting ot the current project.
- The second dialog asks you to choose a column on that project's board.
Test Plan:
- Moved tasks on the same board.
- Moved tasks to a different board.
- Tried to move tasks to the starting column, got a sensible error.
- Tried to move tasks to no project, got a sensible error.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5523
Differential Revision: https://secure.phabricator.com/D18665
Summary: Moves over some of the icons we build for SAAS that can be useful for projects to. Also make builtin list dynamic.
Test Plan: Edit a project image, select a cool sword.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18297
Summary: Builds out a map for icon->image in Projects, selects the icon's image as the default project image if there is no custom image chosen by the user.
Test Plan: Select various icons, see image change. Test choose picture, pick a new image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18174
