Summary:
Ref T4900. The Workboard view controller currently has a lot of different responsibilities (it's ~1,500 lines long) because it has to manage the board filter/sort state.
I'd like to split it up and make it easier to move some workboard features (like "move all tasks in column...") to other Controllers, so we can have smaller controllers implementing specific workflows.
I think the state handling isn't really all that bad, it just needs to be separated a little better than it currently is.
To start with, remove the unused "slug" property.
Test Plan: Searched for "slug", got no hits. This class is final and the property is private, so this is certainly unused.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20626
Summary:
Ref T13269. Workboard triggers can now reassign tasks on column drop. Also sprinkles some `setViewer()` calls in places that needed them.
This mostly works, but a few issues:
* To set the owner to unassigned, you must explicitly put the "No Owner" token in the typeahead. Maybe this should just figure out you've put nothing in that field and set it for you?
* I'm pretty sure this was already broken, but if you change the rule type from a tokenizer to a different type, the default for the field doesn't populate correctly: {F6312227}
Also adds a new hook for trigger rules: `getValueForField($value)` which allows you to transform a value stored in the DB into a form suitable for setting on a form control.
Test Plan: Dragged tasks between columns and observed new owners as expected. Didn't try to get fancy to assign tasks to deleted users, users that the viewer can't see, bot users, etc etc. I'm relying on the underlying transaction to hopefully do the right thing.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20329
Summary:
Depends on D20355. Ref T13275. Ref T13247. Currently, "Hamburger" menus are not automatically built from navigation menus. However, this is (I'm almost completely sure?) a reasonable and appropriate default behavior, and saves us some code around profile menus.
With this rule in place, we can remove `setApplicationMenu()` and `getApplicationMenu()` from `StandardPageView`, since they have no callers.
This also updates a lot of profile menu callsites to a new API which is added in the next change.
Test Plan: See the next two changes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275, T13247
Differential Revision: https://secure.phabricator.com/D20356
Summary:
Depends on D20352. Fixes T12949. If a user adds a link (for example, to a workboard) that takes you to the same page but with some URI parameters, we'd prefer to highlight the "link" item instead of the default "workboard" item when you click it.
For example, you add a `/query/assigned/` "link" item to a workboard, called "Click This To Show Tasks Assigned To Me On This Workboard", i.e. filter the current view.
This is a pretty reasonable thing to want to do. When you click it, we'd like to highlight that item to show that you've activated the "Assigned to Me" filter you added.
However, we currently highlight the thing actually serving the content, i.e. the "Workboard" item.
Instead:
- When picking what to highlight, look through all the items for one with a link to the current request URI.
- If we find one or more, pick the one that would be the default.
- Otherwise, pick the first one.
This means that you can have several items like "?a=1", "?a=2", etc., and we will highlight them correctly when you click them.
This actual patch has some questionable bits (see some discussion in T13275), but I'd like to wait for stronger motivation to refactor it more extensively.
Test Plan:
- On a portal, added a `?a=1` link. Saw it highlight properly when clikced.
- On a workboard, added a link to the board itself with a different filter. Saw it highlight appropriately when clicked.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12949
Differential Revision: https://secure.phabricator.com/D20353
Summary:
Ref T13269. Currently, if you're on a milestone workboard like this:
> Projects > Parent > Milestone > Workboard
The "Parent" link goes to the parent profile. More often, I want it to go to the parent workboard. Try doing that? This is kind of one-off but I suspect it's a better rule.
Also, consolidate one billion manual constructions of "/board/" URIs.
Test Plan: Viewed a milestone workboard, clicked the parent link, ended up on the parent workboard.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20331
Summary:
Ref T5474. Allow columns to play a sound when tasks are dropped.
This is a little tricky because Safari has changed somewhat recently to require some gymnastics to play sounds when the user didn't explicitly click something. Preloading the sound on the first mouse interaction, then playing and immediately pausing it seems to work, though.
Test Plan: Added a trigger with 5 sounds. In Safari, Chrome, and Firefox, dropped a card into the column. In all browsers, heard a nice sequence of 5 sounds played one after the other.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20306
Summary:
Ref T5474. The first rough cut of triggers showed some of the trigger rules in a tooltip when you hover over the "add/remove" trigger menu.
This isn't great since we don't have much room and it's a bit finnicky / hard to read.
Since we have a better way to show effects now in the drop preview, just use that instead. When you hover over the trigger menu, preview the trigger in the "drop effect" element, with a "Trigger: such-and-such" header.
Test Plan:
- This is pretty tough to screenshot.
- Hovered over menu, got a sensible preview of the trigger effects.
- Dragged a card over the menu, no preview.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20304
Summary:
Ref T10335. When you (for example) drag a "Resolved" task into a column with "Trigger: change status to resolved.", don't show a hint that the action will "Change status to resolved." since this isn't helpful and is somewhat confusing.
For now, the only visibility operator is "!=" since all current actions are simple field comparisons, but some actions in the future (like "add subscriber" or "remove project") might need other conditions.
Test Plan:
Dragged cards in ways that previously provided useless hints: move from column A to column B on a "Group by Priority" board; drag a resolved task to a "Trigger: change status to as resolved" column. Saw a more accurate preview in both cases.
Drags which actually cause effects still show the effects correctly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335
Differential Revision: https://secure.phabricator.com/D20300
Summary:
Ref T10335. Ref T5474. When you drag-and-drop a card on a workboard, show a UI hint which lists all the things that the operation will do.
This shows: column moves; changes because of dragging a card to a different header; and changes which will be caused by triggers.
Not implemented here:
- Actions are currently shown even if they have no effect. For example, if you drag a "Normal" task to a different column, it says "Change priority to Normal.". I plan to hide actions which have no effect, but figuring this out is a little bit tricky.
- I'd like to make "trigger effects" vs "non-trigger effects" a little more clear in the future, probably.
Test Plan:
Dragged stuff between columns and headers, and into columns with triggers. Got appropriate preview text hints previewing what the action would do in the UI.
(This is tricky to take a screenshot of since it only shows up while the mouse cursor is down.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335, T5474
Differential Revision: https://secure.phabricator.com/D20299
Summary: Depends on D20287. Ref T5474. This hard-codes a storage value for every trigger, with a "Change status to <default closed status>" rule and two bogus rules. Rules may now apply transactions when cards are dropped.
Test Plan: Dragged cards to a column with a trigger, saw them close.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20288
Summary:
Depends on D20286. Ref T5474. Attaches triggers to columns and makes "Remove Trigger" work.
(There's no "pick an existing named trigger from a list" UI yet, but I plan to add that at some point.)
Test Plan: Attached and removed triggers, saw column UI update appropriately.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20287
Summary:
Depends on D20278. Ref T5474. This change creates some new empty objects that do nothing, and some new views for looking at those objects. There's no actual useful behavior yet.
The "Edit" controller is custom instead of being driven by "EditEngine" because I expect it to be a Herald-style "add new rules" UI, and EditEngine isn't a clean match for those today (although maybe I'll try to move it over).
The general idea here is:
- Triggers are "real" objects with a real PHID.
- Each trigger has a name and a collection of rules, like "Change status to: X" or "Play sound: Y".
- Each column may be bound to a trigger.
- Multiple columns may share the same trigger.
- Later UI refinements will make the cases around "copy trigger" vs "reference the same trigger" vs "create a new ad-hoc trigger" more clear.
- Triggers have their own edit policy.
- Triggers are always world-visible, like Herald rules.
Test Plan: Poked around, created some empty trigger objects, and nothing exploded. This doesn't actually do anything useful yet since triggers can't have any rule behavior and columns can't actually be bound to triggers.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20279
Summary:
Ref T13074. Currently, if you "Move Tasks to Column..." on a board and some of the tasks require MFA to edit, the workflow fatals out.
After this change, it works properly. You still have to answer a separate MFA prompt for //each// task, which is a little ridiculous, but at least doable. A reasonable future refinement would be to batch these MFA prompts, but this is currently the only use case for that.
Test Plan: Set a task to a "Require MFA" status, bulk-moved it with other tasks on a workboard. Was prompted, answered MFA prompt, got a move.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20282
Summary: Depends on D20275. Fixes T10578. This is a static sorting (like "By Date Created") where you can't change point values by dragging. You can still drag cards between columns, or use the "Edit" icon to change point values.
Test Plan: {F6265191}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10578
Differential Revision: https://secure.phabricator.com/D20276
Summary:
Depends on D20274. Ref T10578. This is en route to an ordering by points, it's just a simpler half-step on the way there.
Allow columns to be sorted by creation date, so the newest tasks rise to the top.
In this ordering you can never reposition cards, since editing a creation date by dragging makes no sense. This will be true of the "points" ordering too (although we could imagine doing something like prompting the user, some day).
Test Plan: Viewed boards by "natural" (allows reordering both when dragging within and between columns), "priority" (reorder only within columns), and "creation date" (reorder never). Dragged cards around between and within columns, got apparently sensible behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10578
Differential Revision: https://secure.phabricator.com/D20275
Summary:
Depends on D20267. Depends on D20268. Ref T10333. Currently, we support "Natural" and "Priority" orders, but a lot of the particulars are pretty hard-coded, including some logic in `ManiphestTask`.
Although it's not clear that we'll ever put other types of objects on workboards, it seems generally bad that you need to modify `ManiphestTask` to get a new ordering.
Pull the ordering logic out into a `ProjectColumnOrder` hierarchy instead, and let each ordering define the things it needs to work (name, icon, what headers look like, how different objects are sorted, and how to apply an edit when you drop an object under a header).
Then move the existing "Natural" and "Priority" orders into this new hierarchy.
This has a minor bug where using the "Edit" workflow to change a card's priority on a priority-ordered board doesn't fully refresh card/header order since the response isn't ordering-aware. I'll fix that in an upcoming change.
Test Plan: Grouped workboards by "Natural" and "Priority", dragged stuff around within and between columns, grepped for all touched symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20269
Summary:
Depends on D20263. Ref T10333. I want to add groups like "Assignee" to workboards. This means you may have several tasks grouped under, say, "Alice".
When you drag the bottom-most task under "Alice" to the top, what does that mean?
Today, the only grouping is "Priority", and it means "change the task's secret/hidden global subpriority". However, this seems to generally be a somewhat-bad answer, and is quite complex. It also doesn't make much sense for an author grouping, since one task can't really be "more assigned" to Alice than another task.
Users likely intend this operation to mean "move it, visually, with no other effects" -- that is, user intent is to shuffle sticky notes around on a board, not edit anything substantive. The meaning is probably something like "this is similar to other nearby tasks" or "maybe this is a good place to start", which we can't really capture with any top-level attribute.
We could extend "subpriority" and give tasks a secret/hidden "sub-assignment strength" and so on, but this seems like a bad road to walk down. We'll also run into trouble later when subproject columns may appear on the board, and a user could want to put a task in different positions on different subprojects, conceivably.
In the "Natural" order view, we already have what is probably a generally better approach for this: a task display order particular to the column, that just remembers where you put the sticky notes.
Move away from "subpriority", and toward a world where we mostly keep sticky notes where you stuck them and move them around only when we have to. With no grouping, we still sort by "natural" order, as before. With priority grouping, we now sort by `<priority, natural>`. When you drag stuff around inside a priority group, we update the natural order.
This means that moving cards around on a "priority" board will also move them around on a "natural" board, at least somewhat. I think this is okay. If it's not intuitive, we could give every ordering its own separate "natural" view, so we remember where you stuck stuff on the "priority" board but that doesn't affect the "Natural" board. But I suspect we won't need to.
Test Plan:
- Viewed and dragged a natural board.
- Viewed and dragged a priority board.
- Dragged within and between groups of 0, 1, and multiple items.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20265
Summary:
Ref T10333. Ref T8135. Depends on D20247. Allow users to drag-and-drop cards on a priority-sorted workboard under headers, even if the header has no other cards.
As of D20247, headers show up but they aren't really interactive. Now, you can drag cards directly underneath a header (instead of only between other cards). For example, if a column has only one "Wishlist" task, you may drag it under the "High", "Normal", or "Low" priority headers to select a specific priority.
(Some of this code still feels a little rough, but I think it will generalize once other types of sorting are available.)
Test Plan: Dragged cards within and between priority groups, saw appropriate priority edits applied in every case I could come up with.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333, T8135
Differential Revision: https://secure.phabricator.com/D20248
Summary:
Ref T10333. When workboards are ordered (for example, by priority), add headers to the various groups. Major goals are:
- Allow users to drag-and-drop to set values that no cards currently have: for example, you can change a card priority to "normal" by dragging it under the "normal" header, even if no other cards in the column are currently "Normal".
- Make future orderings more useful, particularly "order by assignee". We don't really have room to put the username on every card and it would create a fair amount of clutter, but we can put usernames in these headers and then reference them with just the profile picture. This also allows you to assign to users who are not currently assigned anything in a given column.
- Make the drag-and-drop behavior more obvious by showing what it will do more clearly (see T8135).
- Make things a little easier to scan in general: because space on cards is limited, some information isn't conveyed very clearly (for example, priority information is currently conveyed //only// through color, which can be hard to pick out visually and is probably not functional for users who need vision accommodations).
- Maybe do "swimlanes": this is pretty much a "swimlanes" UI if we add whitespace at the bottom of each group so that the headers line up across all the columns (e.g., "Normal" is at the same y-axis position in every column as you scroll down the page). Not sold on this being useful, but it's just a UI adjustment if we do want to try it.
NOTE: This only makes these headers work for display.
They aren't yet recognized as targets by the drag list UI, so you can't drag cards into an empty group. I'll tackle that in a followup.
Test Plan: {F6257686}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20247
Summary: Ref T13250. See D20149. Mostly: clarify semantics. Partly: remove magic "null" behavior.
Test Plan: Poked around, but mostly just inspection since these are pretty much one-for-one.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20154
Summary:
Fixes T13208. See that task for details.
The `clone $query` line is safe if `$query` is a builtin query (like "open").
However, if it's a saved query we clone not only the query parameters but the ID, too. Then when we `save()` the query later, we overwrite the original query.
So this would happen in the database. First, you run a query and save it as the workboard default (query key "abc123"):
| 123 | abc123 | {"...xxx..."} |
Then we `clone` it and change the parameters, and `save()` it. But that causes an `UPDATE ... WHERE id = 123` and the table now looks like this:
| 123 | def456 | {"...yyy..."} |
What we want is to create a new query instead, with an `INSERT ...`:
| 123 | abc123 | {"...xxx..."} |
| 124 | def456 | {"...yyy..."} |
Test Plan:
- Followed reproduction steps from above.
- With just the new `save()` guard, hit the guard error.
- With the `newCopy()`, got a new copy of the query and "View as Query" remained functional without overwriting the original query row.
- Ran migration, saw an affected board get fixed.
Reviewers: amckinley, joshuaspence
Reviewed By: joshuaspence
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13208
Differential Revision: https://secure.phabricator.com/D19768
Summary:
Ref T13120. See PHI571. Fixes T5024. This adds a "View as Query" action to workboard columns, which builds a query in Maniphest that has the current query constraints plus an additional constraint to select only tasks in the specified column.
This is a normal query and can be turned into a dashboard panel, added to a menu, edited, saved as a link, etc.
Much of the complexity here is that finding tasks in a given column isn't entirely straightforward because of how board layout works: when you create a task, it isn't immediately placed in columns. It's only actually added to the "Backlog" column on any boards when someone looks at the board.
To get the right behavior, we must do "board layout" for any queried columns before we can constrain results. This isn't enormously efficient, but should be OK for reasonable boards.
Test Plan:
- Used "View as Query" for normal columns and milestome columns, got appropriate queries in Maniphest.
- Applied filters to the board (e.g., "Priorities: wishlist"), then used "View As Query" and had my custom filters respected.
- Queried some large boards/columns with more than a thousand tasks, got results back within a second or so.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T5024
Differential Revision: https://secure.phabricator.com/D19366
Summary:
Depends on D18805. Ref T13025. Fixes T10268.
Instead of using a list of IDs for the bulk editor, power it with SearchEngine queries. This gives us the full power of SearchEngine and lets us use a query key instead of a list of 20,000 IDs to avoid issues with URL lengths.
Also, split it into a base `BulkEngine` and per-application subclasses. This moves us toward T10005 and universal support for bulk operations.
Also:
- Renames most of "batch" to "bulk": we're curently inconsitent about this, I like "bulk" better since I think it's more clear if you don't regularly interact with `.bat` files, and newer stuff mostly uses "bulk".
- When objects in the result set can't be edited because you don't have permission, show the status more clearly.
This probably breaks some stuff a bit since I refactored so heavily, but it seems mostly OK from poking around. I'll clean up anything I missed in followups to deal with remaining items on T13025.
Test Plan:
{F5302300}
- Bulk edited from Maniphest.
- Bulk edited from a workboard (no more giant `?ids=....` in the URL).
- Hit most of the error conditions, I think?
- Clicked the "Cancel" button.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10268
Differential Revision: https://secure.phabricator.com/D18806
Summary:
See PHI94. I considered this initially but wasn't sure about it. However, PHI94 brings up the good point that we already use a similar rule in Maniphest.
For consistency, only show visible columns here too.
Test Plan: Used "Move tasks to column..." on a board with visible and hidden columns, only saw visbile columns offered in the dropdown.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18668
Summary:
Ref T5523. See PHI50. See PHI40. This isn't perfect, but should improve things.
Add a "Move tasks to column..." action to workboards which moves all visible tasks in a column to another column, either on the same board or on a different board.
This is a two-step process so that I don't have to write Javascript, and because I'm not 100% sure this is what users actually want/need. If it sticks, the UI could be refined later.
- The first dialog asks you to choose a project, defaulting ot the current project.
- The second dialog asks you to choose a column on that project's board.
Test Plan:
- Moved tasks on the same board.
- Moved tasks to a different board.
- Tried to move tasks to the starting column, got a sensible error.
- Tried to move tasks to no project, got a sensible error.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5523
Differential Revision: https://secure.phabricator.com/D18665
Summary: This was interesting, because there were a mix of callsites using transactions and others that just set the property on the `Project` object. I made everything consistent in using transactions to change this property. I also found an implementation of `getTitle()` that I don't think is ever being invoked since `shouldHide()` is returning `true`, but I migrated it anyway.
Test Plan: Unit tests pass + enabling/disabling workboards (and importing).
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D18004
Summary: Adds a divider and better grouping
Test Plan: Click on dropdown menu on a workboard
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17984
Summary: Slightly nicer, more consistent UI. Also removed "Column History" from dropdowns as this is available on the general board manage page.
Test Plan: Review Board and Column management pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17881
Summary: Moves "reorder columns" and "change background" up a level, redesigns "manage" page to be a little cleaner.
Test Plan: Change colors, reorder columns, manage page, disable board, re-enable board.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17879
Summary: This brings up "Edit Column" as an action item under the main column dropdown as well as a "Column History" for completeness. Unsure column history is actually useful, but leaving it in anyways. It might be nice to have some sort of dialog version of a history page.
Test Plan: Make a workboard, add a column, edit column name, stay on workboard.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17874
Summary:
Ref T12314. Ref T6064. Ref T11580. If an install defines several different task create forms (like "Create Plant" and "Create Animal"), allow any of them to be created directly onto a workboard column.
This is just a general consistency improvement that makes Custom Forms and Workboards work together a bit better. We might do something fancier eventually for T6064 (which wants fewer clicks) and/or T11580 (which wants per-workboard control over forms or defaults).
Test Plan:
- Created several different types of tasks directly onto a workboard.
- Faked just one create form, saw the UI unchanged (except that it respects any renaming).
{F3492928}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314, T11580, T6064
Differential Revision: https://secure.phabricator.com/D17446
Summary:
Ref T12314. When we pick an "Edit" form for a subtyped object, only consider forms with the same subtype.
For example, editing an "Animal" uses the forms with subtype "animal" which are marked as edit forms.
This also makes "Create Subtask" carry the parent task's type.
Test Plan:
- Edited an Animal, got an animal edit form.
- Edited a normal task, got a normal task form.
- Edited a paste, got the normal workflow.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17445
Summary: Lots of little details, fix workboard bg colors, darken up global backgrounds just a hair, add more "widgety" look to dashboard panels, remove underline on anchors on mobile. Also Fixes T12210
Test Plan: Use lots of pages on mobile and desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12210
Differential Revision: https://secure.phabricator.com/D17315
Summary: Ref T11957.
Test Plan:
- Viewed an existing project profile.
- Viewed a user profile.
- Created a new project.
- Edited a profile menu.
- Added new profile items.
- Grepped for renamed symbols.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11957
Differential Revision: https://secure.phabricator.com/D17028
Summary: This is still reasonably functional and useful to people, and we don't have better mechanics to offset the change.
Test Plan: New Workboard, set Workboard color, test mobile, desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16964
Summary: Visually, I think these are much cleaner (with colors), and provide more workspace. I also don't really use the sidenav here and if I did, it would be to go back to the project homepage. I think this is overall better. If navigation page to project home is difficult or hard to find, we can maybe make a better header / crumbs bar to reduce that.
Test Plan: New project -> basic new board. Existing project -> color board. Desktop, Mobile, Fullscreen
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16882
Summary: Creates a background that renders inside the Quicksand frame, through sorcery.
Test Plan: Turn on Quicksand, visit lots of pages. See correct background colors. This probably blows something up I'm not testing.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16642
Summary: Uses the background color changes to show also on the side nav. Places color on entire body so fullscreen doesn't show other body color.
Test Plan: Review various workboard colors at normal and fullscreen
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15283
Summary:
Adds a UI for selecting background colors.
You can choose "Use Parent", which is the default, and allows you to set a color that all descendants inherit.
You can also choose "None", if a parent has a WHACKY BACKGROUND that you refuse to put up with.
Test Plan:
{F1114588}
{F1114589}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15279
Summary:
This gives us room for less-common workboard management options like "Disable Board" without overloading the menus on the main board.
Particularly, we can add background color options here without anything getting weird.
I've left "Add Column" on the main UI since I think it's common enough to leave there. We could probably move "Hide Column" to this UI in the future, though.
Test Plan: {F1114475}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15278
Summary:
Ref T10349. At HEAD, if you create a task //on a board//, it floats to the top correctly.
If you create a task elsewhere and tag it with the board, you were subject to the whims of the layout engine and it would generally end up on the bottom.
Instead, make the rules consistent so that "virtual" positions (of tasks which haven't been committed to a particular position yet) still float to the top.
Test Plan:
- Created tasks from a board.
- Created tasks from Maniphest, then looked at them on a board.
- Moved tasks around.
- In all cases, newly created tasks floated to the top.
- Sorted by natural and priority.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15276
Summary: Makes these pages a dialog endpoint, keeping you on the Workboard when possible.
Test Plan: Create a Column, Edit a Column, visit hard page. Test letters in the points field.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15270
Summary: Cleans up the backgrounds a little on Projects/Profiles and adds a number of colour choices for Workboards.
Test Plan:
Manually add each color for testing. Test new project / profile layouts with and without properties.
{F1109325}
{F1109326}
{F1109327}
{F1109328}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15269
Summary:
Fixes T6641. This allows users who have permission to edit a project to use "Save as Default" to save the current order and filter as defaults for the project.
These are per-board defaults, and apply to all users. The rationale is that I think the best default ordering/filtering depends mostly on the board, not the viewer.
This seems to align with most requests in the task, although rationale is a bit light. But, for example, it seems reasonable you might want to change the default filter to "All Tasks" on a sprint board, so you can see what's in the "Done" column.
This also fixes some minor issues I ran into:
- Herald could hit an issue while checking permissions if the project was a subproject and a non-member had a triggering rule.
- "Advanced filter..." did not prefill with the current filter.
Test Plan:
- Set default order and filter on a workboard.
- Reloaded board, saw settings stick.
- Tried to edit a board as an unprivileged user (disabled menu items, error).
- Reviewed transaction log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6641
Differential Revision: https://secure.phabricator.com/D15260
Summary:
These columns were conflating `projectPHID` (the defualt project to add to the task) with `boardPHID` (the board the column appears on).
Separate them to fix the beahvior.
Test Plan: Used "Add Task" from dropdown menu of a milestone column on a parent project's workboard.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15242
Summary: Ref T4427.
Test Plan:
- Dragged a 17 XP task from "Hunting" to "Slain".
- Saw 17 XP move.
- Level up!
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15237
