manual/addons/import_export/node_shaders_info.rst

@@ -12,7 +12,8 @@ Especially for exporting from Blender materials, the node system must follow som
 
 .. note::
 
-   Currently, only the :doc:`FBX </addons/import_export/scene_fbx>` IO add-on uses this method.
+   Currently, only the :doc:`FBX </addons/import_export/scene_fbx>`
+   and the :doc:`3DS </addons/import_export/scene_3ds>` IO add-on uses this method.
 
 .. tip::
 

manual/animation/drivers/drivers_panel.rst

@@ -189,6 +189,7 @@ Variable Type
          channel value (before parenting or constraints), or ``["prop_name"]`` for a custom property.
 
       .. tip::
+
          Although the values of the x/y/z animation channels for the camera location can be accessed
          via ``camera.location[0/1/2]``, retrieving its world space location and orientation after parenting
          and constraints currently requires using ``camera.matrix_world``. This property can be understood

manual/editors/3dview/display/shading.rst

@@ -22,6 +22,19 @@ opens a popover with additional options described below.
 Pressing :kbd:`Z` opens a pie menu for changing the shading mode.
 Pressing :kbd:`Shift-Z` switches between the current shading mode and Wireframe.
 
+.. _bpy.types.View3DShading.wireframe_color_type:
+
+Wire Color
+   How the wireframes are colored. This affects the object outline, wireframe overlay, and wireframe shading mode.
+
+   :Single:
+      All objects get shaded using the same single color.
+   :Object:
+      Use the color from the object's
+      :ref:`Viewport Display <properties-object-viewport-display>` settings.
+   :Random:
+      Each object gets displayed in a random color.
+
 
 .. _3dview-shading-rendered:
 
@@ -30,27 +43,18 @@ Wireframe
 
 Only displays the edges (wireframes) of the objects in the scene.
 
-Color
-   Single
-      All objects get shaded using the same single color.
-   Object
-      Use the color from the object's
-      :ref:`Viewport Display <properties-object-viewport-display>` settings.
-   Random
-      Each object gets displayed in a random color.
-
 .. _bpy.types.View3DShading.background_type:
 
 Background
    How the background is displayed in the 3D Viewport.
 
-   Theme
+   :Theme:
       Use the background of the theme. This can be configured in the
       :doc:`Themes Preferences </editors/preferences/themes>`
       under :menuselection:`3D Viewport --> Theme Space --> Gradient Colors`.
-   World
+   :World:
       Use the color from the :doc:`World </render/lights/world>`'s Viewport Display options.
-   Viewport
+   :Viewport:
       Select a custom color for the background of the 3D Viewport.
 
 Options

manual/editors/3dview/modes.rst

@@ -125,6 +125,7 @@ Alternatively, you can hover over the other object in the 3D Viewport
 and press :kbd:`Alt-Q`.
 
 .. seealso::
+
    :ref:`Lock Object Modes <bpy.types.ToolSettings.lock_object_mode>` for
    preventing *accidental* mode changes.
 

manual/editors/graph_editor/fcurves/editing.rst

@@ -440,6 +440,8 @@ Blend
    values greater than 0.5 cause keyframes to concave down, a value of 0.5 results in a straight line.
 
 
+.. _bpy.ops.graph.blend_offset:
+
 Blend Offset
 ------------
 
@@ -455,6 +457,8 @@ Offset Factor
    At 1 the last key is aligned with the key after the selection.
 
 
+.. _bpy.ops.graph.blend_to_ease:
+
 Blend to Ease
 -------------
 
@@ -469,8 +473,11 @@ Blend
    At 1 the keys will rise quickly and then taper off.
 
 
+.. _bpy.ops.graph.match_slope:
+
 Match Slope
 -----------
+
 .. reference::
 
    :Menu:      :menuselection:`Key --> Blend --> Match Slope`
@@ -483,8 +490,11 @@ Factor
    Determines which slope to blend towards. At -1 will blend to the left slope, at 1 to the right.
 
 
-Shear
+.. _bpy.ops.graph.shear:
------
+
+Shear Keys
+----------
+
 .. reference::
 
    :Menu:      :menuselection:`Key --> Blend --> Shear Keys`
@@ -495,7 +505,6 @@ between the start and end of the selection.
 
 Shear Factor
    How much to shear and if it shears up or down. Negative values shear down, positive shear up.
-
 Direction
    `From Left` or `From Right` determine the anchor key from which to shear.
 
@@ -508,6 +517,7 @@ Smooth
    :Menu:      :menuselection:`Key --> Smooth`
    :Shortcut:  :kbd:`Alt-S`
 
+
 .. _bpy.ops.graph.smooth:
 
 Smooth (Legacy)
@@ -561,6 +571,7 @@ Filter Width
 
    F-Curve after applying the Gaussian Smooth with the original curve overlayed.
 
+
 Butterworth Smooth
 ------------------
 
@@ -576,18 +587,14 @@ Frequency Cutoff
    The lower the value the smoother the curve. There is an implicit maximum at which
    the value no longer changes the curve which is at half the sample rate. The sample
    rate in this case is the scene frame rate multiplied by the `Samples per Frame` of this operator.
-
 Filter order
    Higher values mean the frequency cutoff is steeper.
-
 Samples per Frame
    Before the filter is applied, the curve is resampled at this interval to avoid errors when there
    are uneven spaces between frames. If keys are on subframes, e.g. a 60fps file in a 30fps scene,
    increase this value to 2.
-
 Blend
    A 0-1 value to blend from original curve to filtered curve.
-
 Blend In/Out
    The number of frames at the start and end for which to blend between the filtered and unfiltered curve.
    This can help reducing jumps in the animation at the selection border. At value 1 it only locks the first and

manual/editors/preferences/editing.rst

@@ -142,7 +142,7 @@ Node Editor
 Auto-Offset
    Automatically offset the following or previous nodes in a chain when inserting a new node.
    See :ref:`editors-nodes-usage-auto-offset` for more information.
-Node Auto-offset Margin
+Auto-offset Margin
    Margin to use for :ref:`offsetting nodes <editors-nodes-usage-auto-offset>`.
 
 

manual/editors/preferences/viewport.rst

@@ -52,6 +52,10 @@ HDRI Preview Size
 Size
    Diameter of the *3D Viewport Axis* widget.
 
+Fresnel Edit Mode
+   Enable a fresnel effect on edit mesh overlays.
+   It improves shape readability of very dense meshes, but increases eye fatigue when modeling lower poly.
+
 
 .. _prefs-system-multisampling:
 

manual/editors/uv/selecting.rst

@@ -36,6 +36,7 @@ If *Sync Selection* is enabled, you can hold :kbd:`Shift` while clicking a selec
 activate multiple ones at the same time, or :kbd:`Ctrl` to expand/contract the selection.
 
 .. seealso::
+
    :doc:`Mesh Selection </modeling/meshes/selecting/introduction>`
 
 

manual/grease_pencil/modes/draw/guides.rst

@@ -41,7 +41,6 @@ Guide Types
       Angle direction of the isometric lines.
 
 
-
 Common Options
 --------------
 

manual/interface/controls/nodes/arranging.rst

@@ -43,7 +43,8 @@ for the new node.
 
 .. figure:: /images/interface_controls_nodes_arranging_auto-offset.png
 
-Auto-offset is enabled by default, but it can be disabled in the :ref:`User Preferences <preferences-editing-node-editor>`.
+Auto-offset is enabled by default,
+but it can be disabled in the :ref:`User Preferences <preferences-editing-node-editor>`.
 
 You can toggle the offset direction while you are moving the node by pressing :kbd:`T`.
 

manual/interface/selecting.rst

@@ -157,6 +157,7 @@ Holding :kbd:`Ctrl` will remove them.
 While dragging, you can additionally hold :kbd:`Spacebar` to move the shape around with the mouse.
 
 .. note::
+
    *Select Lasso* behaves the same as *Select Circle* in that
    it only looks at origin points in Object Mode.
 

manual/modeling/geometry_nodes/input/constant/material.rst

@@ -13,6 +13,11 @@ Material Node
 The *Material* input node outputs a single material. It can be connected to other material sockets
 to make using the same material name in multiple places more convenient.
 
+.. tip::
+
+   The Material node can also be added by dragging and dropping a material data-block into the node editor.
+   This will add the node and select the dropped material in the :ref:`ui-data-block`.
+
 
 Inputs
 ======

manual/modeling/geometry_nodes/mesh/read/index.rst

@@ -11,8 +11,8 @@
    edge_vertices.rst
    edges_to_face_groups.rst
    face_area.rst
-   face_neighbors.rst
    face_group_boundaries.rst
+   face_neighbors.rst
    face_is_planar.rst
    is_shade_smooth.rst
    mesh_island.rst

manual/render/cycles/object_settings/cameras.rst

@@ -85,6 +85,7 @@ A position on the sensor is mapped to a direction with spherical coordinates
 :math:`(1, \theta, \phi)` in radians as follows:
 
 .. math::
+
   & r = \sqrt{x^2 + y^2}\\
   & \theta = k_0 + k_1 r + k_2 r^2 + k_3 r^3 + k_4 r^4\\
   & \phi = acos(x/r)

manual/sculpt_paint/brush/brush_settings.rst

@@ -190,6 +190,7 @@ Auto-Masking :guilabel:`Sculpt Mode`
    The difference is that these toggles can be customized per brush to create specific brush behaviors.
 
 .. seealso::
+
    For more information on the Auto-Masking toggles, see :doc:`Auto-Masking </sculpt_paint/sculpting/controls>`.
 
 .. _bpy.types.Brush.sculpt_plane:

manual/sculpt_paint/sculpting/editing/expand.rst

@@ -76,6 +76,7 @@ Pattern Creation
       loops and a recursion to create wood carving patterns.
 
    .. tip::
+
       :doc:`Mirror options </sculpt_paint/sculpting/tool_settings/symmetry>`
       can also be combined with the expansion.
 

manual/sculpt_paint/vertex_paint/editing.rst

@@ -3,65 +3,125 @@
 Editing
 *******
 
+.. _bpy.ops.paint.vertex_color_set:
+
+Set Vertex Colors
+=================
+
 .. reference::
 
    :Mode:      Vertex Paint Mode
-   :Menu:      :menuselection:`Paint`
+   :Menu:      :menuselection:`Paint --> Set Vertex Colors`
+   :Shortcut:  :kbd:`Ctrl-X`
 
-.. _bpy.ops.paint.vertex_color_set:
+Fill the active Color Attribute with the current paint color.
 
-Set Vertex Colors :kbd:`Ctrl-X`
-   Fill the active Color Attribute with the current paint color.
 
 .. _bpy.ops.paint.vertex_color_smooth:
 
 Smooth Vertex Colors
-   Smooth colors across vertices.
+====================
+
+.. reference::
+
+   :Mode:      Vertex Paint Mode
+   :Menu:      :menuselection:`Paint --> Smooth Vertex Colors`
+
+Smooth colors across vertices.
+
 
 .. _bpy.ops.paint.vertex_color_dirt:
 
 Dirty Vertex Colors
-   Blur Strength
+===================
+
+.. reference::
+
+   :Mode:      Vertex Paint Mode
+   :Menu:      :menuselection:`Paint --> Dirty Vertex Colors`
+
+Generate a dirt map gradient based on cavity.
+
+Blur Strength
    Blur strength per iteration.
-   Blur Iterations
+Blur Iterations
    Number of times to blur the colors (higher blurs more).
-   Highlight Angle
+Highlight Angle
    Clamps the angle for convex areas of the mesh.
    Lower values increase the contrast but can result in clamping.
    90 means flat, 180 means infinitely pointed.
-   Dirt Angle
+Dirt Angle
    Clamps the angle for concave areas of the mesh.
    Higher values increase the contrast but can result in clamping.
    90 means flat, 0 means infinitely deep.
-   Dirt Only
+Dirt Only
    When active it won't calculate cleans for convex areas.
-   Normalize
+Normalize
    Choose optimal contrast by effectively lowering
    *Highlight Angle* and increasing *Dirt Angle* automatically.
-      Disabling *Normalize* allows getting consistent results across multiple
+   Disabling *Normalize* allows getting consistent results across multiple objects.
-      objects.
+
 
 .. _bpy.ops.paint.vertex_color_from_weight:
 
 Vertex Color from Weight
-   Converts the active weight into grayscale colors.
+========================
+
+.. reference::
+
+   :Mode:      Vertex Paint Mode
+   :Menu:      :menuselection:`Paint --> Vertex Color from Weight`
+
+Converts the active weight into grayscale colors.
+
 
 .. _bpy.ops.paint.vertex_color_invert:
 
 Invert
-   Invert RGB values.
+======
+
+.. reference::
+
+   :Mode:      Vertex Paint Mode
+   :Menu:      :menuselection:`Paint --> Invert`
+
+Invert RGB values.
+
 
 .. _bpy.ops.paint.vertex_color_levels:
 
 Levels
-   Adjust the levels of the selected vertices.
+======
+
+.. reference::
+
+   :Mode:      Vertex Paint Mode
+   :Menu:      :menuselection:`Paint --> Levels`
+
+Adjust the levels of the selected vertices.
+
 
 .. _bpy.ops.paint.vertex_color_hsv:
 
 Hue/Saturation/Value
-   Adjust the HSV values of the selected vertices.
+====================
+
+.. reference::
+
+   :Mode:      Vertex Paint Mode
+   :Menu:      :menuselection:`Paint --> Hue/Saturation/Value`
+
+Adjust the HSV values of the selected vertices.
+
 
 .. _bpy.ops.paint.vertex_color_brightness_contrast:
 
 Brightness/Contrast
-   Adjust the brightness/contrast of the selected vertices.
+===================
+
+.. reference::
+
+   :Mode:      Vertex Paint Mode
+   :Menu:      :menuselection:`Paint --> Brightness/Contrast`
+
+Adjust the brightness/contrast of the selected vertices.