manual/addons/import_export/images_as_planes.rst

@@ -52,7 +52,7 @@ Compositing Nodes
 -----------------
 
 Setup Corner Pin
-   Add a compositing setup of the Image Texture, Scale, and :doc:`Corner Pin </compositing/types/distort/corner_pin>`
+   Add a compositing setup of the Image Texture, Scale, and :doc:`Corner Pin </compositing/types/transform/corner_pin>`
    nodes to inject a warped view of the image into the compositor output. The add-on adds drivers to
    the corner values of the Corner Pin node so that transforms of the plane and camera drive them.
    Make sure to have an active camera in the scene before the import.

manual/compositing/index.rst

@@ -24,11 +24,43 @@ Node Types
 
    types/input/index.rst
    types/output/index.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
    types/color/index.rst
-   types/converter/index.rst
    types/filter/index.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   types/keying/index.rst
+   types/mask/index.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   types/tracking/index.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   types/transform/index.rst
+   types/utilities/index.rst
    types/vector/index.rst
-   types/matte/index.rst
+
-   types/distort/index.rst
+----------
+
+.. toctree::
+   :maxdepth: 1
+
    types/groups.rst
    types/layout/index.rst

manual/compositing/types/color/adjust/index.rst

@@ -0,0 +1,17 @@
+
+##########
+  Adjust
+##########
+
+.. toctree::
+   :maxdepth: 1
+
+   bright_contrast.rst
+   color_balance.rst
+   color_correction.rst
+   exposure.rst
+   gamma.rst
+   hue_correct.rst
+   hue_saturation.rst
+   rgb_curves.rst
+   tone_map.rst

manual/compositing/types/color/adjust/rgb_curves.rst

@@ -84,7 +84,7 @@ In this example, the image has too much red in it,
 so we run it through an *RGB Curves* node and reduce the Red channel.
 
 Also, read on for examples of the Darken and Contrast Enhancement curves,
-:doc:`here </compositing/types/color/mix>`.
+:doc:`here </compositing/types/color/mix/mix_color>`.
 
 
 Color Correction using Black/White Levels

manual/compositing/types/color/index.rst

@@ -10,17 +10,29 @@ overlaying another image, etc.
 .. toctree::
    :maxdepth: 1
 
-   alpha_over.rst
+   adjust/index.rst
-   bright_contrast.rst
+
-   color_balance.rst
+----------
-   color_correction.rst
+
-   exposure.rst
+.. toctree::
-   gamma.rst
+   :maxdepth: 1
-   hue_correct.rst
+
-   hue_saturation.rst
+   mix/index.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   alpha_convert.rst
+   color_ramp.rst
+   convert_colorspace.rst
+   set_alpha.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
    invert_color.rst
-   mix.rst
+   rgb_to_bw.rst
-   posterize.rst
-   rgb_curves.rst
-   tone_map.rst
-   z_combine.rst

manual/compositing/types/color/mix/index.rst

@@ -0,0 +1,25 @@
+
+#######
+  Mix
+#######
+
+.. toctree::
+   :maxdepth: 1
+
+   alpha_over.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   combine_color.rst
+   separate_color.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   mix_color.rst
+   z_combine.rst

manual/compositing/types/color/mix/mix_color.rst

@@ -1,7 +1,7 @@
 .. index:: Compositor Nodes; Mix
 .. _bpy.types.CompositorNodeMixRGB:
 .. Editor's Note: This page gets copied into:
-.. - :doc:`</render/cycles/nodes/types/color/mix>`
+.. - :doc:`</render/shader_nodes/color/mix>`
 .. - :doc:`</modeling/geometry_nodes/utilities/color/mix_rgb>`
 .. - :doc:`</render/shader_nodes/converter/mix>`
 .. - :doc:`</modeling/geometry_nodes/utilities/mix>`

manual/compositing/types/color/set_alpha.rst

@@ -70,7 +70,7 @@ The node tree below shows how to do this using the Set Alpha node.
    Fade to black.
 
 In the example above, the alpha channel of the swirl image is ignored.
-Instead, a :doc:`Time Curve node </compositing/types/input/time_curve>`
+Instead, a :doc:`Time Curve node </compositing/types/input/scene/time_curve>`
 introduces a factor from 0.0 to 1.0 over 60 frames, or about 2 seconds,
 to the Set Alpha node. Note that the time curve is exponentially-shaped,
 so that the overall blackness will fade in slowly and then accelerate toward the end.

manual/compositing/types/converter/index.rst

@@ -1,28 +0,0 @@
-
-###################
-  Converter Nodes
-###################
-
-As the name implies, these nodes convert the colors or other properties of various data
-(e.g. transparency) in some way.
-
-They also split out or re-combine the different color channels that make up an image,
-allowing you to work on each channel independently.
-Various color channel arrangements are supported, including traditional RGB, HSV
-and :abbr:`HDMI (High Definition Media Interface)` formats.
-
-.. toctree::
-   :maxdepth: 1
-
-   alpha_convert.rst
-   color_space.rst
-   color_ramp.rst
-   combine_color.rst
-   combine_xyz.rst
-   id_mask.rst
-   math.rst
-   rgb_to_bw.rst
-   separate_color.rst
-   separate_xyz.rst
-   set_alpha.rst
-   switch_view.rst

manual/compositing/types/filter/blur/bokeh_blur.rst

@@ -30,7 +30,7 @@ Size
    controlled by an input image. In order to use the latter, the Variable Size option must be selected.
    See the examples section below for more on how to use this.
 Bounding Box
-   This can be used with a :doc:`Box Mask </compositing/types/matte/box_mask>`
+   This can be used with a :doc:`Box Mask </compositing/types/mask/box_mask>`
    matte node or with a :doc:`Mask </compositing/types/input/mask>`
    input node to restrict the area of the image the blur is applied to. This could be helpful, for example,
    when developing a node system by allowing only a small area of the image to be filtered
@@ -59,14 +59,14 @@ Examples
 
 Three examples of how the size input may be used follow.
 
-An :doc:`ID masked </compositing/types/converter/id_mask>`
+An :doc:`ID masked </compositing/types/mask/id_mask>`
 alpha image can be used so that a background is blurred while foreground objects remain in focus.
 To prevent strange edges the :doc:`Dilate Node </compositing/types/filter/dilate_erode>` should be used.
 
-The Z pass can be visualized using a :doc:`Map Value </compositing/types/vector/map_value>` node
+The Z pass can be visualized using a :doc:`Map Value </compositing/types/utilities/map_value>` node
-and a :doc:`Color Ramp </compositing/types/converter/color_ramp>` node
+and a :doc:`Color Ramp </compositing/types/color/color_ramp>` node
-as described in :doc:`Render Layers </compositing/types/input/render_layers>`.
+as described in :doc:`Render Layers </compositing/types/input/scene/render_layers>`.
-A *multiply* :doc:`Math </compositing/types/converter/math>` node can be used following the color ramp
+A *multiply* :doc:`Math </compositing/types/utilities/math>` node can be used following the color ramp
 so that a blur value greater than one is used for objects outside the focal range.
 
 .. figure:: /images/compositing_types_filter_bokeh-blur_example-1.png

manual/compositing/types/filter/blur/index.rst

@@ -0,0 +1,14 @@
+
+#####################
+  Blur Filter Nodes
+#####################
+
+.. toctree::
+   :maxdepth: 1
+
+   bilateral_blur.rst
+   blur.rst
+   bokeh_blur.rst
+   defocus.rst
+   directional_blur.rst
+   vector_blur.rst

manual/compositing/types/filter/index.rst

@@ -6,21 +6,35 @@
 Filters process the pixels of an image to highlight additional details or perform some sort of
 post-processing effect on the image.
 
+.. toctree::
+   :maxdepth: 1
+
+   blur/index.rst
+
+----------
+
 .. toctree::
    :maxdepth: 1
 
    anti_aliasing.rst
-   bilateral_blur.rst
-   blur_node.rst
-   bokeh_blur.rst
-   defocus.rst
    denoise.rst
    despeckle.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
    dilate_erode.rst
-   directional_blur.rst
-   filter_node.rst
-   glare.rst
    inpaint.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   filter.rst
+   glare.rst
    pixelate.rst
+   posterize.rst
    sun_beams.rst
-   vector_blur.rst

manual/compositing/types/filter/pixelate.rst

@@ -9,7 +9,7 @@ Pixelate Node
    :align: right
    :alt: Pixelate Node.
 
-Add this node in front of a :doc:`Scale node </compositing/types/distort/scale>`
+Add this node in front of a :doc:`Scale node </compositing/types/transform/scale>`
 to get a pixelated (non-smoothed) image from the resultant upscaled image.
 
 

manual/compositing/types/input/bokeh_image.rst

@@ -10,7 +10,7 @@ Bokeh Image Node
    :alt: Bokeh Image Node.
 
 The *Bokeh Image* node generates a special input image for use with
-the :doc:`Bokeh Blur </compositing/types/filter/bokeh_blur>` filter node.
+the :doc:`Bokeh Blur </compositing/types/filter/blur/bokeh_blur>` filter node.
 
 The *Bokeh Image* node is designed to create a reference image which simulates optical parameters
 such as aperture shape and lens distortions which have important impacts on bokeh in real cameras.
@@ -52,7 +52,7 @@ Example
 =======
 
 In the example below the *Bokeh Image* is used to define the shape of the bokeh for
-the :doc:`Bokeh Blur </compositing/types/filter/bokeh_blur>` node.
+the :doc:`Bokeh Blur </compositing/types/filter/blur/bokeh_blur>` node.
 
 .. figure:: /images/compositing_types_filter_bokeh-blur_example-1.png
    :width: 640px

manual/compositing/types/input/constant/index.rst

@@ -0,0 +1,11 @@
+
+
+############
+  Constant
+############
+
+.. toctree::
+   :maxdepth: 1
+
+   rgb.rst
+   value.rst

manual/compositing/types/input/constant/value.rst

@@ -48,4 +48,4 @@ this makes the node a useful organizational tool.
 .. tip::
 
    From this you can also make different values proportional to each other by adding
-   a :doc:`Math Node </compositing/types/converter/math>` in between the different links.
+   a :doc:`Math Node </compositing/types/utilities/math>` in between the different links.

manual/compositing/types/input/index.rst

@@ -15,6 +15,13 @@ For instance, an input can be:
 These nodes generate the information that is passed to other nodes.
 As such, they have no input sockets; only outputs.
 
+.. toctree::
+   :maxdepth: 1
+
+   constant/index.rst
+
+----------
+
 .. toctree::
    :maxdepth: 1
 
@@ -22,10 +29,11 @@ As such, they have no input sockets; only outputs.
    image.rst
    mask.rst
    movie_clip.rst
-   render_layers.rst
-   rgb.rst
-   scene_time.rst
    texture.rst
-   time_curve.rst
+
-   track_position.rst
+----------
-   value.rst
+
+.. toctree::
+   :maxdepth: 1
+
+   scene/index.rst

manual/compositing/types/input/scene/index.rst

@@ -0,0 +1,12 @@
+
+
+#########
+  Scene
+#########
+
+.. toctree::
+   :maxdepth: 1
+
+   render_layers.rst
+   scene_time.rst
+   time_curve.rst

manual/compositing/types/input/scene/time_curve.rst

@@ -48,7 +48,7 @@ Factor
 
 .. hint:: Output values
 
-   The :doc:`Map Value </compositing/types/vector/map_value>`
+   The :doc:`Map Value </compositing/types/utilities/map_value>`
    node can be used to map the output to a more appropriate value.
    With sometimes curves, it is possible that the Time Curve node
    may output a number larger than one or less than zero.

manual/compositing/types/keying/index.rst

@@ -1,7 +1,7 @@
 
-###############
+################
-  Matte Nodes
+  Keying Nodes
-###############
+################
 
 These nodes give you the essential tools for creating a :term:`Matte` for images
 that do not already have their own :term:`Alpha Channel`.
@@ -18,7 +18,7 @@ Taking out too much green can result in foreground actors looking flat or bluish
 You can and should chain these nodes together,
 improving your masking and color correction in successive refinements,
 using each node's strengths to operate on the previous node's output.
-:doc:`Keying Node </compositing/types/matte/keying>` is the closest to a "does-it-all" node
+:doc:`Keying Node </compositing/types/keying/keying>` is the closest to a "does-it-all" node
 for green screens, but the best results stem from a combination of techniques.
 
 .. note::
@@ -34,26 +34,21 @@ for green screens, but the best results stem from a combination of techniques.
    by the node.
 
    Simple garbage mattes can be created with
-   the :doc:`Box Mask </compositing/types/matte/box_mask>` or
+   the :doc:`Box Mask </compositing/types/mask/box_mask>` or
-   the :doc:`Ellipse Mask </compositing/types/matte/ellipse_mask>`.
+   the :doc:`Ellipse Mask </compositing/types/mask/ellipse_mask>`.
    More complicated matte shapes using
-   a :doc:`Double Edge Mask </compositing/types/matte/double_edge_mask>` or
+   a :doc:`Double Edge Mask </compositing/types/mask/double_edge_mask>` or
    using a :doc:`Mask </compositing/types/input/mask>`.
 
 .. toctree::
    :maxdepth: 1
 
-   box_mask.rst
    channel_key.rst
    chroma_key.rst
    color_key.rst
    color_spill.rst
-   cryptomatte.rst
-   cryptomatte_legacy.rst
    difference_key.rst
    distance_key.rst
-   double_edge_mask.rst
-   ellipse_mask.rst
    keying.rst
    keying_screen.rst
    luminance_key.rst

manual/compositing/types/keying/keying.rst

@@ -22,7 +22,7 @@ Image
 Key Color
    The color of content to be removed. This may be a single color,
    or a reference image such as generated by
-   the :doc:`Keying Screen Node </compositing/types/matte/keying_screen>`.
+   the :doc:`Keying Screen Node </compositing/types/keying/keying_screen>`.
 Garbage Matte
    An optional mask of area(s) to always *exclude* from the output.
    This is removed from the chroma key generated matte.
@@ -48,12 +48,12 @@ Despill Factor
    Controls how much color bleed from the key color is removed from the input
    image: 0 means no despilling, 1 means all possible spilling will be removed.
    The underlying implementation is the same as adjusting the *Unspill* amount
-   of the :doc:`Color Spill Node </compositing/types/matte/color_spill>`.
+   of the :doc:`Color Spill Node </compositing/types/keying/color_spill>`.
 Despill Balance
    This controls how the color channels are compared when computing spill,
    affecting the hue and shade of the corrected colors.
    It is similar to setting the *Limiting Channel*
-   in the :doc:`Color Spill Node </compositing/types/matte/color_spill>`.
+   in the :doc:`Color Spill Node </compositing/types/keying/color_spill>`.
 Edge Kernel Radius
    Defines the radius in pixel used to detect an edge.
 Edge Kernel Tolerance
@@ -63,7 +63,7 @@ Edge Kernel Tolerance
 Clip Black
    This sets the threshold for what becomes fully transparent in the output (black in the matte).
    It should be set as low as possible. Uneven backdrops will require this value to be increased.
-   Use of the :doc:`Keying Screen Node </compositing/types/matte/keying_screen>` can help
+   Use of the :doc:`Keying Screen Node </compositing/types/keying/keying_screen>` can help
    keep this value low. You may also use a *Garbage Matte* to exclude problematic areas.
 
    This value does not impact areas detected as edges to ensure edge detail is preserved.
@@ -94,8 +94,8 @@ Image
    Processed image with the *Matte* applied to the images' :term:`Alpha Channel`.
 Matte
    Output matte to use for checking the quality of the key, or to manually apply
-   using a :doc:`Set Alpha Node </compositing/types/converter/set_alpha>` or
+   using a :doc:`Set Alpha Node </compositing/types/color/set_alpha>` or
-   :doc:`Mix Node </compositing/types/color/mix>`.
+   :doc:`Mix Node </compositing/types/color/mix/mix_color>`.
 Edges
    Shows what edges were detected on the matte.
    Useful for adjusting the *Edge Kernel Radius* and *Edge Kernel Tolerance*.

manual/compositing/types/keying/keying_screen.rst

@@ -49,7 +49,7 @@ Example
 =======
 
 Consider a node setup for green screen removal, using
-a :doc:`Color Key </compositing/types/matte/color_key>`:
+a :doc:`Color Key </compositing/types/keying/color_key>`:
 
 .. figure:: /images/compositing_types_matte_keying-screen_key-usage.png
    :width: 480px

manual/compositing/types/keying/luminance_key.rst

@@ -21,7 +21,7 @@ that aren't suitable for chroma keying.
 .. tip::
 
    When compositing footage of something that emits light and has a dark background,
-   like fire, a :doc:`Mix Node </compositing/types/color/mix>` using a *Screen* or
+   like fire, a :doc:`Mix Node </compositing/types/color/mix/mix_color>` using a *Screen* or
    *Add* operator will produce better results.
 
 

manual/compositing/types/layout/index.rst

@@ -1,5 +1,4 @@
 
-.. _composite-nodes-layout-index:
 
 ################
   Layout Nodes
@@ -7,7 +6,3 @@
 
 These are nodes which help you control the layout and connectivity of nodes within the Compositor.
 
-.. toctree::
-   :maxdepth: 1
-
-   switch.rst

manual/compositing/types/mask/box_mask.rst

@@ -61,4 +61,4 @@ Mask
 
 .. tip::
 
-   For soft edges, pass the output mask through a slight :doc:`Blur node </compositing/types/filter/blur_node>`.
+   For soft edges, pass the output mask through a slight :doc:`Blur node </compositing/types/filter/blur/blur>`.

manual/compositing/types/mask/cryptomatte_legacy.rst

@@ -21,7 +21,7 @@ and mattes will be anti-aliased and take into account effects like motion blur a
 .. important::
 
    The Cryptomatte Legacy node is deprecated and replaced by
-   :doc:`Cryptomatte Node </compositing/types/matte/cryptomatte>`.
+   :doc:`Cryptomatte Node </compositing/types/mask/cryptomatte>`.
    The legacy node will be removed in a future Blender release.
 
 

manual/compositing/types/mask/ellipse_mask.rst

@@ -62,5 +62,5 @@ Mask
 
 .. tip::
 
-   For soft edges, pass the output mask through a slight :doc:`Blur node </compositing/types/filter/blur_node>`.
+   For soft edges, pass the output mask through a slight :doc:`Blur node </compositing/types/filter/blur/blur>`.
    For a vignette, pass the output of this through a heavy blur.

manual/compositing/types/mask/id_mask.rst

@@ -13,7 +13,7 @@ The *ID Mask Node* can be used to access an alpha mask per object or per materia
 
 .. seealso::
 
-   The ID Mask node is superseded by the :doc:`/compositing/types/matte/cryptomatte`.
+   The ID Mask node is superseded by the :doc:`/compositing/types/mask/cryptomatte`.
    Cryptomatte is more feature complete and supported by Cycles and Eevee.
    It is recommended to use this feature moving forward.
 
@@ -23,8 +23,8 @@ Inputs
 
 ID Value
    Input for the *Object Index* or *Material Index* render pass.
-   Which is an output of the :doc:`Render Layers node </compositing/types/input/render_layers>` or
+   Which is an output of the :doc:`Render Layers node </compositing/types/input/scene/render_layers>` or
-   the :doc:`Image node </compositing/types/input/render_layers>` with a multi-layer format.
+   the :doc:`Image node </compositing/types/input/scene/render_layers>` with a multi-layer format.
 
 
 Properties

manual/compositing/types/mask/index.rst

@@ -0,0 +1,26 @@
+
+##############
+  Mask Nodes
+##############
+
+.. toctree::
+   :maxdepth: 1
+
+   cryptomatte.rst
+   cryptomatte_legacy.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   box_mask.rst
+   ellipse_mask.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   double_edge_mask.rst
+   id_mask.rst

manual/compositing/types/output/index.rst

@@ -9,7 +9,12 @@ These nodes are used to output the composited result in some way.
    :maxdepth: 1
 
    composite.rst
-   file.rst
-   levels.rst
    split_viewer.rst
    viewer.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   file_output.rst

manual/compositing/types/tracking/index.rst

@@ -0,0 +1,11 @@
+
+##################
+  Tracking Nodes
+##################
+
+.. toctree::
+   :maxdepth: 1
+
+   plane_track_deform.rst
+   stabilize_2d.rst
+   track_position.rst

manual/compositing/types/transform/corner_pin.rst

@@ -10,7 +10,7 @@ Corner Pin Node
    :alt: Corner Pin Node.
 
 The Corner Pin node uses explicit corner values for a plane warp transformation.
-It works like the :doc:`Plane Track Deform </compositing/types/distort/plane_track_deform>` node,
+It works like the :doc:`Plane Track Deform </compositing/types/tracking/plane_track_deform>` node,
 but without using "plane track" data from the Movie Clip Editor.
 
 

manual/compositing/types/transform/index.rst

@@ -1,7 +1,7 @@
 
-#################
+###################
-  Distort Nodes
+  Transform Nodes
-#################
+###################
 
 These nodes distort the image in some fashion, operating either uniformly on the image,
 or by using a mask to vary the effect over the image.
@@ -9,16 +9,32 @@ or by using a mask to vary the effect over the image.
 .. toctree::
    :maxdepth: 1
 
-   corner_pin.rst
-   crop.rst
-   displace.rst
-   flip.rst
-   lens_distortion.rst
-   map_uv.rst
-   movie_distortion.rst
-   plane_track_deform.rst
    rotate.rst
    scale.rst
-   stabilize_2d.rst
    transform.rst
    translate.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   corner_pin.rst
+   crop.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   displace.rst
+   flip.rst
+   map_uv.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   lens_distortion.rst
+   movie_distortion.rst

manual/compositing/types/transform/map_uv.rst

@@ -12,7 +12,7 @@ Map UV Node
 With this node objects can be "re-textured" after they have been rendered.
 
 To apply a texture to individual enumerated objects
-the :doc:`ID Mask Node </compositing/types/converter/id_mask>` could be used.
+the :doc:`ID Mask Node </compositing/types/mask/id_mask>` could be used.
 
 
 Inputs

manual/compositing/types/transform/transform.rst

@@ -9,9 +9,9 @@ Transform Node
    :align: right
    :alt: Transform Node.
 
-This node combines the functionality of three other nodes: :doc:`Scale </compositing/types/distort/scale>`,
+This node combines the functionality of three other nodes: :doc:`Scale </compositing/types/transform/scale>`,
-:doc:`translate </compositing/types/distort/translate>`,
+:doc:`translate </compositing/types/transform/translate>`,
-and :doc:`rotate </compositing/types/distort/rotate>` nodes.
+and :doc:`rotate </compositing/types/transform/rotate>` nodes.
 
 
 Inputs

manual/compositing/types/utilities/index.rst

@@ -0,0 +1,27 @@
+
+###################
+  Utilities Nodes
+###################
+
+.. toctree::
+   :maxdepth: 1
+
+   map_range.rst
+   map_value.rst
+   math.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   levels.rst
+   normalize.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
+   switch.rst
+   switch_stereo_view.rst

manual/compositing/types/vector/index.rst

@@ -1,4 +1,3 @@
-.. _composite-nodes-vector-index:
 
 ################
   Vector Nodes
@@ -9,8 +8,13 @@ These nodes can be used to manipulate various types of vectors, such as surface
 .. toctree::
    :maxdepth: 1
 
-   map_range.rst
+   combine_xyz.rst
-   map_value.rst
+   separate_xyz.rst
+
+----------
+
+.. toctree::
+   :maxdepth: 1
+
    normal.rst
-   normalize.rst
    vector_curves.rst

manual/editors/texture_node/types/color/hue_saturation.rst

@@ -1,4 +1,4 @@
 .. _bpy.types.TextureNodeHueSaturation:
 .. DO NOT EDIT FILE. This is simply a stub which copies everything from the link below.
-.. include:: /compositing/types/color/hue_saturation.rst
+.. include:: /compositing/types/color/adjust/hue_saturation.rst
    :start-after: .. --- copy below this line ---

manual/editors/texture_node/types/color/mix_rgb.rst

@@ -1,4 +1,4 @@
 .. _bpy.types.TextureNodeMixRGB:
 .. DO NOT EDIT FILE. This is simply a stub which copies everything from the link below.
-.. include:: /compositing/types/color/mix.rst
+.. include:: /compositing/types/color/mix/mix_color.rst
    :start-after: .. --- copy below this line ---

manual/editors/texture_node/types/color/rgb_curves.rst

@@ -1,4 +1,4 @@
 .. _bpy.types.TextureNodeCurveRGB:
 .. DO NOT EDIT FILE. This is simply a stub which copies everything from the link below.
-.. include:: /compositing/types/color/rgb_curves.rst
+.. include:: /compositing/types/color/adjust/rgb_curves.rst
    :start-after: .. --- copy below this line ---

manual/editors/texture_node/types/converter/color_ramp.rst

@@ -1,4 +1,4 @@
 .. _bpy.types.TextureNodeValToRGB:
 .. DO NOT EDIT FILE. This is simply a stub which copies everything from the link below (for texture nodes).
-.. include:: /compositing/types/converter/color_ramp.rst
+.. include:: /compositing/types/color/color_ramp.rst
    :start-after: .. --- copy below this line ---

manual/editors/texture_node/types/converter/math.rst

@@ -1,4 +1,4 @@
 .. _bpy.types.TextureNodeMath:
 .. DO NOT EDIT FILE. This is simply a stub which copies everything from the link below.
-.. include:: /compositing/types/converter/math.rst
+.. include:: /compositing/types/utilities/math.rst
    :start-after: .. --- copy below this line ---

manual/editors/texture_node/types/converter/rgb_to_bw.rst

@@ -1,4 +1,4 @@
 .. _bpy.types.TextureNodeRGBToBW:
 .. DO NOT EDIT FILE. This is simply a stub which copies everything from the link below.
-.. include:: /compositing/types/converter/rgb_to_bw.rst
+.. include:: /compositing/types/color/rgb_to_bw.rst
    :start-after: .. --- copy below this line ---

manual/editors/texture_node/types/input/time.rst

@@ -1,4 +1,4 @@
 .. _bpy.types.TextureNodeCurveTime:
 .. DO NOT EDIT FILE. This is simply a stub which copies everything from the link below.
-.. include:: /compositing/types/input/time_curve.rst
+.. include:: /compositing/types/input/scene/time_curve.rst
    :start-after: .. --- copy below this line ---

manual/editors/video_sequencer/sequencer/sidebar/modifiers.rst

@@ -93,7 +93,7 @@ Color Balance Modifier
 
 Color balance adjustments, either by the Lift, Gamma, and Gain or the Slope, Offset and Power method.
 
-This modifier works similar to the :doc:`Color Balance Node </compositing/types/color/color_balance>`.
+This modifier works similar to the :doc:`Color Balance Node </compositing/types/color/adjust/color_balance>`.
 
 .. figure:: /images/video-editing_sequencer_sidebar_color-balance-modifier.png
    :align: right
@@ -131,7 +131,7 @@ Curves Modifier
 
 Color and RGB curves.
 
-This modifier works the same as the :doc:`Curves Node </compositing/types/color/rgb_curves>`.
+This modifier works the same as the :doc:`Curves Node </compositing/types/color/adjust/rgb_curves>`.
 
 
 .. index:: Video Sequencer Modifiers; Hue Correct Modifier
@@ -142,7 +142,7 @@ Hue Correct Modifier
 
 HSV multi points curves.
 
-This modifier works the same as the :doc:`Curves Node </compositing/types/color/hue_correct>`.
+This modifier works the same as the :doc:`Curves Node </compositing/types/color/adjust/hue_correct>`.
 
 
 .. index:: Video Sequencer Modifiers; Mask Modifier
@@ -191,7 +191,7 @@ Tone Map Modifier
 Used to map one set of colors to another in order to approximate the appearance
 of high dynamic range images in a medium that has a more limited dynamic range.
 
-This modifier works the same as the :doc:`Tone Map Node </compositing/types/color/tone_map>`.
+This modifier works the same as the :doc:`Tone Map Node </compositing/types/color/adjust/tone_map>`.
 
 
 .. index:: Video Sequencer Modifiers; White Balance Modifier