build_files/.htaccess

@@ -243,3 +243,9 @@ RedirectMatch "^/manual/{lang}/{version}/editors/nla/editing.html" "^/manual/{la
 RedirectMatch "^/manual/{lang}/{version}/render/shader_nodes/shader/anisotropic.html" "^/manual/{lang}/{version}/render/shader_nodes/shader/glossy.html"
 
 RedirectMatch "^/manual/{lang}/{version}/files/import_export.html" "^/manual/{lang}/{version}/files/import_export/index.html"
+
+RedirectMatch "^/manual/{lang}/{version}/render/eevee/light_probes/introduction.html" "^/manual/{lang}/{version}/render/eevee/light_probes/index.html"
+RedirectMatch "^/manual/{lang}/{version}/movie_clip/introduction.html" "^/manual/{lang}/{version}/movie_clip/index.html"
+RedirectMatch "^/manual/{lang}/{version}/getting_started/about/introduction.html" "^/manual/{lang}/{version}/getting_started/about/index.html"
+RedirectMatch "^/manual/{lang}/{version}/animation/armatures/bones/properties/introduction.html" "^/manual/{lang}/{version}/animation/armatures/bones/properties/index.html"
+RedirectMatch "^/manual/{lang}/{version}/advanced/command_line/introduction.html" "^/manual/{lang}/{version}/advanced/command_line/index.html"

manual/advanced/command_line/index.rst

@@ -27,7 +27,7 @@ for specific instructions on launching Blender from the command line.
 
 
 Launching from the Command Line
-================================
+===============================
 
 .. toctree::
    :hidden:

manual/advanced/deploying_blender.rst

@@ -10,6 +10,7 @@ For example in an animation studio or for school courses.
 
 This page contains tips setting up Blender in such environments.
 
+
 Installing Blender
 ==================
 
@@ -23,18 +24,21 @@ change the results of production files. For a given project, it is
 advisable to use a single :abbr:`LTS (Long-Term-Support)` version
 of Blender. LTS versions receive bug fixes for two years.
 
+
 Working Offline
 ===============
 
 For security or other reasons, workstation may not have internet access.
 
 By default Blender does not access the internet, however this can be
-enabled in the System preferences with the Online Access option.
+enabled in the System preferences with the
+:ref:`Online Access <bpy.types.PreferencesSystem.use_online_access>` option.
 
 Working offline can be enforced by running with the ``--offline-mode``
 :ref:`command line argument <command-line-args-network-options>`. Users
 will then be unable to enable online access in the preferences.
 
+
 .. _deploying-blender-bundling:
 
 Bundling Extensions
@@ -65,6 +69,7 @@ In the Extensions preferences, it's possible to manually set a custom
 directory of the default System repository and to create multiple
 repositories.
 
+
 Bundling Scripts
 ================
 
@@ -79,6 +84,7 @@ These script directories are expected to contain specific directories
 like ``presets``, ``addons`` and ``startup`` for different types of
 scripts. See :ref:`blender-directory-path-layout` for a complete list.
 
+
 Startup Scripts
 ---------------
 
@@ -103,6 +109,7 @@ For example, a script can enable add-ons for every user.
    if __name__ == "__main__":
        register()
 
+
 Application Templates
 ---------------------
 
@@ -117,6 +124,7 @@ The files are expected to be placed in the system script directories like this:
    $BLENDER_SYSTEM_SCRIPTS/startup/bl_app_templates_system/MyTemplate/__init__.py
    $BLENDER_SYSTEM_SCRIPTS/startup/bl_app_templates_system/MyTemplate/startup.blend
 
+
 Legacy Add-ons
 --------------
 
@@ -138,6 +146,7 @@ Blender follows the `VFX reference platform <https://vfxplatform.com>`_,
 which means it is able to run on the same systems as other VFX software
 and exchange image, volume and scene files with them.
 
+
 Python Version
 --------------
 

manual/advanced/extensions/addons.rst

@@ -44,10 +44,12 @@ This option is controlled by Preferences, which can be overriding via command-li
 (``--offline-mode`` / ``--online-mode``).
 
 For better error messages, you can check also for ``bpy.app.online_access_overriden``,
-to determine whether users can turn ``Allow Online Access`` on the preferences, or not.
+to determine whether users can turn :ref:`Allow Online Access <bpy.types.PreferencesSystem.use_online_access>`
+on the preferences, or not.
 
 Blender itself doesn't block internet access based on this setting. It is up to the add-ons to respect it.
 
+
 Bundle Dependencies
 ===================
 
@@ -72,6 +74,7 @@ Bundle with `Vendorize <https://pypi.org/project/vendorize>`__
 
    This has the advantage of avoiding version conflicts although it requires some work to setup each package.
 
+
 .. This section is reference for legacy add-on installation.
 .. _bpy.ops.preferences.addon_install:
 
@@ -88,6 +91,7 @@ Preferences.
 All add-on maintainers are urged to convert the add-ons they want to share, so they are future proof and can support
 features like updating from the extensions platform.
 
+
 Converting a Legacy Add-on into an Extension
 --------------------------------------------
 
@@ -103,6 +107,7 @@ Converting a Legacy Add-on into an Extension
    For testing it is import to :doc:`install the extension from disk </editors/preferences/extensions>` and check if
    everything is working well. This will get you as close to the final experience as possible.
 
+
 Extensions and Namespace
 ------------------------
 
@@ -114,6 +119,7 @@ For example, now instead of ``kitsu`` the module name would be ``bl_ext.{reposit
 
 This has a few implications for preferences and module imports.
 
+
 User Preferences and ``__package__``
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 

manual/advanced/extensions/command_line_arguments.rst

@@ -119,7 +119,7 @@ usage::
        blender --command extension install-file [-h] -r REPO [-e] [--no-prefs]
                                                 FILE
 
-Install a package file into a local repository.
+Install a package file into a user repository.
 
 positional arguments:
   :FILE:                  The packages file.
@@ -238,7 +238,7 @@ usage::
        blender --command extension build [-h] [--source-dir SOURCE_DIR]
                                          [--output-dir OUTPUT_DIR]
                                          [--output-filepath OUTPUT_FILEPATH]
-                                         [--verbose]
+                                         [--split-platforms] [--verbose]
 
 Build a package in the current directory.
 
@@ -256,6 +256,11 @@ options:
                         The package output filepath (should include a ``.zip`` extension).
 
                         Defaults to a name created using the ``id`` from the manifest.
+  --split-platforms     Build a separate package for each platform.
+                        Adding the platform as a file name suffix (before the extension).
+
+                        This can be useful to reduce the upload size of packages that bundle large
+                        platform-specific modules (``*.whl`` files).
   --verbose             Include verbose output.
 
 .. _command-line-args-extension-validate:
@@ -286,6 +291,8 @@ Subcommand: ``server-generate``
 usage::
 
        blender --command extension server-generate [-h] --repo-dir REPO_DIR
+                                                   [--html]
+                                                   [--html-template HTML_TEMPLATE_FILE]
 
 Generate a listing of all packages stored in a directory.
 This can be used to host packages which only requires static-file hosting.
@@ -293,3 +300,12 @@ This can be used to host packages which only requires static-file hosting.
 options:
   -h, --help            show this help message and exit
   --repo-dir REPO_DIR   The remote repository directory.
+  --html                Create a HTML file (``index.html``) as well as the repository JSON
+                        to support browsing extensions online with static-hosting.
+  --html-template HTML_TEMPLATE_FILE
+                        An optional HTML file path to override the default HTML template with your own.
+
+                        The following keys will be replaced with generated contents:
+
+                        - ``${body}`` is replaced the extensions contents.
+                        - ``${date}`` is replaced the creation date.

manual/advanced/extensions/creating_repository/dynamic_repository.rst

@@ -0,0 +1,37 @@
+****************************************
+Creating a Dynamic Extensions Repository
+****************************************
+
+If you plan to setup a dynamic extensions repository, read first about :doc:`static repositories <static_repository>`.
+The expected format for how to list all the packages is the same, and should be used as a starting point.
+
+Multiple Versions
+=================
+
+When Blender fetches the extensions listing it passes the following arguments to make sure only
+compatible extensions are listed:
+
+- ``platform``
+- ``blender_version``
+
+This means that servers have the chance to handle these arguments to output a single entry per-extension on the listing.
+
+These arguments are passed as parameters to the server via a query URL:
+
+   :URL: ``https://extensions.blender.org/api/v1/extensions/``
+   :query URL: ``https://extensions.blender.org/api/v1/extensions/?blender_version=4.2.0&platform=linux-x64``
+
+
+Access Token
+============
+
+Some repositories may require authentication. The user can specify an ``access token`` for a repository,
+which is passed along with the API request from Blender.
+
+This is passed to the servers via an Authorization header:
+
+.. code-block:: sh
+
+  curl -i https://extensions.blender.org/api/v1/extensions/ \
+    -H "Accept: application/json" \
+    -H "Authorization: Bearer abc29832befb92983423abcaef93001"

manual/advanced/extensions/creating_repository/index.rst

@@ -0,0 +1,28 @@
+*********************************
+Creating an Extensions Repository
+*********************************
+
+Third party sites that wish to support extensions in Blender can do so in two ways:
+
+#. Fork the entire `Extensions Website <https://projects.blender.org/infrastructure/extensions-website>`__
+   as a start point; or
+#. Host a :doc:`JSON file <static_repository>` listing all the packages of your repository; or
+#. Serve the JSON file :doc:`dynamically <dynamic_repository>`.
+
+Repository Types
+================
+
+.. toctree::
+   :maxdepth: 1
+
+   Static Repository <static_repository.rst>
+   Dynamic Repository <dynamic_repository.rst>
+
+Tags and Translations
+=====================
+
+If you are planning to use a different set of :doc:`tags <../tags>` than the ones used by Blender Extensions Platform,
+remember to submit a pull request to
+`tags.py <https://projects.blender.org/blender/blender/src/scripts/modules/_bpy_internal/extensions/tags.py>`__.
+
+This way they can be shown translated within Blender.

manual/advanced/extensions/creating_repository/static_repository.rst

@@ -0,0 +1,70 @@
+***************************************
+Creating a Static Extensions Repository
+***************************************
+
+To host your own extensions and leverage Blender update system all that is required is a static JSON file on a server,
+pointing towards download links for the extensions.
+
+JSON
+====
+
+To generate a valid JSON file you can use the command-line tool:
+
+.. code:: bash
+
+   blender --command extension server-generate --repo-dir=/path/to/packages
+
+This creates a listing from all the packages found in the specified location.
+
+See :ref:`server-generate <command-line-args-extension-server-generate>` docs.
+
+The generated JSON is aligned with the `API <https://developer.blender.org/docs/features/extensions/api_listing/>`__.
+
+
+Download Links
+==============
+
+In order to support drag and drop for installing from a remote repository,
+there are a few optional ways to prepare the URLs.
+
+The only strict requirement is that the download URL must end in ``.zip``.
+
+You can pass different arguments to the URL to give more clues to Blender about what to do with the dragged URL.
+
+   :repository:
+      Link to the JSON file to be used to install the repository on Blender.
+      It supports relative URLs.
+   :platforms:
+      Comma-separated list of supported platforms.
+      If omitted, the extension will be available in all operating systems.
+   :blender_version_min:
+      Minimum supported Blender version.
+   :blender_version_max:
+      Blender version that the extension does not support, earlier versions are supported.
+
+
+.. tip::
+
+   The more details you provide, the better the user experience.
+
+With the exception of the ``repository``, all the other parameters can be extracted from the extensions manifest.
+Those arguments are to be encoded as part of the URL.
+
+Expected format:
+   ``<URL>.zip?repository=<repository>&blender_version_min=<version_min>&blender_max=<version_max_exclusive>&platforms=<platform1,platform2,...>``
+
+Example:
+   ``https://extensions.blender.org/add-ons/amaranth-toolset/1.0.23/download/add-on-amaranth-toolset-v1.0.23.zip?repository=/api/v1/extensions/&blender_version_min=4.2.0&platforms=linux-x64,macos-x64``
+
+
+HTML Example
+------------
+
+For a sample of the HTML code you can use to list all the extensions in the repository, use the ``html`` option
+when generating the server.
+
+.. code:: bash
+
+   blender --command extension server-generate --repo-dir=/path/to/packages --html
+
+This creates a ``download.html`` file with all the extra URLs parameters ready to use.

manual/advanced/extensions/getting_started.rst

@@ -161,7 +161,7 @@ Optional values:
    :permissions:
       Add-ons can list which resources they require. The available options are
       *files*, *network*, *clipboard*, *camera*, *microphone*.
-      Each permission should be followed by an explanation (short single-sentence with no end pontuation (.)).
+      Each permission should be followed by an explanation (short single-sentence with no end punctuation (``.``)).
 
 Optional values for "build":
 
@@ -188,6 +188,11 @@ Optional values for "build":
         "*.zip",
       ]
 
+Reserved:
+   These values **must not** be declared in a TOML and are reserved for internal use.
+
+   - ``[build.generated]``
+
 
 .. note::
 
@@ -237,55 +242,5 @@ See :ref:`validate <command-line-args-extension-validate>` docs.
 Third party extension sites
 ===========================
 
-Third party sites that wish to support extensions in Blender can do so in two ways:
+If you want to host the extensions yourself,
-
+see the :doc:`Creating an Extensions Repository <./creating_repository/index>` docs.
-#. Fork the entire `Extensions Website <https://projects.blender.org/infrastructure/extensions-website>`__
-   as a start point; or
-#. Host a JSON file listing all the packages of your repository.
-
-To generate a valid JSON file you can use the command-line tool:
-
-.. code:: bash
-
-   blender --command extension server-generate --repo-dir=/path/to/packages
-
-This creates a listing from all the packages found in the specified location.
-
-See :ref:`server-generate <command-line-args-extension-server-generate>` docs.
-
-Example of what the JSON is expected to look like:
-
-.. code:: json
-
-   {
-     "version": "v1",
-     "blocklist": [],
-     "data": [
-      {
-         "id": "blender_kitsu",
-         "name": "Blender Kitsu",
-         "tagline": "Pipeline management for projects collaboration",
-         "version": "0.1.5-alpha+f52258de",
-         "type": "add-on",
-         "archive_size": 856650,
-         "archive_hash": "sha256:3d2972a6f6482e3c502273434ca53eec0c5ab3dae628b55c101c95a4bc4e15b2",
-         "archive_url": "https://extensions.blender.org/add-ons/blender-kitsu/0.1.5-alpha+f52258de/download/",
-         "blender_version_min": "4.2.0",
-         "maintainer": "Blender Studio",
-         "tags": ["Pipeline"],
-         "license": ["SPDX:GPL-3.0-or-later"],
-         "website": "https://extensions.blender.org/add-ons/blender-kitsu/",
-         "schema_version": "1.0.0"
-      }
-      ]
-  }
-
-Just like for the manifest file, the optional fields (e.g., ``blender_version_max``) are either to have a value
-or should be omitted from the entries.
-
-For the official Extensions Platform, the ``website`` value is the page of the extension in the online platform.
-Even if the manifest points to the project specific website.
-
-.. note::
-
-   Any remote repository is expected to follow the latest `API <https://extensions.blender.org/api/swagger/>`__.

manual/advanced/extensions/index.rst

@@ -25,3 +25,4 @@ Other third party sites can also be supported, as long as they follow the Extens
    Add-ons <addons.rst>
    Python Wheels <python_wheels.rst>
    Command Line Arguments <command_line_arguments.rst>
+   Creating a Repository <creating_repository/index.rst>

manual/advanced/extensions/python_wheels.rst

@@ -80,3 +80,44 @@ Running
 
       import PIL
       print(PIL.__file__)
+
+
+Platform Builds
+===============
+
+Wheels can severely impact the size of an extension. To mitigate this, it is possible to build different
+extension zip files for each unique required platform.
+
+For this you need to use the ``--split-platforms`` option from the
+:ref:`build <command-line-args-extension-build>` command.
+
+.. code:: bash
+
+   blender --command extension build --split-platforms
+
+Example
+-------
+
+Manifest file excerpt:
+
+.. code-block:: toml
+
+   id = "my_addon_with_wheels"
+   version = "1.0.0"
+
+   platforms = ["windows-x64", "macos-x64"]
+   wheels = [
+      "./wheels/pillow-10.3.0-cp311-cp311-macosx_11_0_arm64.whl",
+      "./wheels/pillow-10.3.0-cp311-cp311-manylinux_2_28_x86_64.whl",
+      "./wheels/pillow-10.3.0-cp311-cp311-win_amd64.whl",
+   ]
+
+Generated files from ``--split-platforms``:
+
+- my_addon_with_wheels-1.0.0-windows_x64.zip
+- my_addon_with_wheels-1.0.0-macos_x64.zip
+
+.. note::
+
+   Even though there is a Linux-only wheel present, no Linux zip file is generated.
+   This happens because the ``platforms`` field only has Mac and Windows.

manual/advanced/scripting/addon_tutorial.rst

@@ -485,7 +485,7 @@ For API documentation on the functions listed above, see:
 Bringing It All Together
 ^^^^^^^^^^^^^^^^^^^^^^^^
 
-::
+.. code-block:: python
 
    bl_info = {
        "name": "Cursor Array",

manual/animation/constraints/transform/limit_rotation.rst

@@ -5,30 +5,36 @@
 Limit Rotation Constraint
 *************************
 
-An object or bone can be rotated around the X, Y and Z axes.
+This constraint restricts the rotation of an object or bone to be inside
-This constraint restricts the amount of allowed rotations around each axis,
+specified angular limits.  The limits are given as Euler rotation ranges (a min
-through lower and upper bounds.
+and max angle), and a separate range can be given for each of the three axes.
 
-It is interesting to note that even though the constraint limits the visual and
+As with all constraints in Blender, this does not (by default) restrict the
-rendered rotations of its owner, its owner's data-block still allows (by default)
+user-set rotation values of the object/bone as seen in the *Transform* panel.
-the object or bone to have rotation values outside the minimum and maximum ranges.
+When the object/bone is rotated outside the limit range, it will be constrained
-This can be seen in the *Transform* panel.
+to that range in its final displayed/rendered position, but the user-set
-When an owner is rotated and attempted to be rotated outside the limit boundaries,
+rotation values will still be outside that range. If the constraint is removed,
-it will be constrained to those boundaries visually and when rendered, but internally,
+the object/bone will then jump back to match those user-set values.
-its rotation values will still be changed beyond the limits. If the constraint is removed,
-its ex-owner will seem to jump to its internally specified rotation.
 
-Similarly, if its owner has an internal rotation that is beyond the limit, rotating it back
+Something unique about the Limit Rotation constraint (as compared to the Limit
-into the limit area will appear to do nothing until the internal rotation values are back
+Location and Limit Scale constraints) is that rotations loop, and therefore the
-within the limit threshold (unless you enabled the *Affect Transform* option, see below).
+meaning of the limit range is subtly different. All constraints in Blender
+internally work on transform matrices, which can't distinguish between e.g. 180
+and -180 degrees, or 0, 360, and 720 degrees. In other words, any angles that
+result in the same visual rotation are indistinguishable to the constraint
+system.
 
-Setting equal the min and max values of an axis,
+What this means for the Limit Rotation constraint is that when the user-set
-locks the owner's rotation around that axis... Although this is possible,
+rotation is outside of the limit range, the final displayed rotation will snap
-using the *Transformation Properties* axis locking feature is probably easier.
+to the closest *visual* rotation in that range, not the closest numerical angle.
+For example, if you have a limit range of 0 to 90 degrees then a user-set
+rotation of 340 degrees will actually snap to *0 degrees* because that is the
+closer *visual* rotation, even though 340 is numerically closer to 90.
 
-This transform does not constrain the bone if it is manipulated by the IK solver.
+Note that this constraint does not constrain the bone if it is manipulated by
-For constraining the rotation of a bone for IK purposes,
+the IK solver. For constraining the rotation of a bone for IK purposes, see
-see :doc:`Inverse Kinematics </animation/armatures/posing/bone_constraints/inverse_kinematics/introduction>`.
+:doc:`Inverse Kinematics
+</animation/armatures/posing/bone_constraints/inverse_kinematics/introduction>`.
 
 
 Options
@@ -55,13 +61,24 @@ Limit X, Y, Z
 
 Order
    Allows specifying which :term:`Euler` order to use when applying the limits.
-   Defaults to the order of the owner.
+   Defaults to the order of the owner, or XYZ if the owner uses non-Euler
+   rotations.
 
 Affect Transform
    The constraint is taken into account when the object is manually rotated using
    transformation tools in the editors. This prevents assigning transformation
    property values (as shown in the *Transform* panel) that exceed the specified limits.
 
+Legacy Behavior
+   For backwards compatibility: make the constraint behave in the semi-broken
+   way it did prior to Blender 4.2. This old behavior does not properly account
+   for the looping nature of rotations, and therefore causes
+   unpredictable/erratic rotation snapping. However, this behavior can still be
+   useful in some specific circumstances when `Owner` is set to local space, and
+   some older rig setups utilize that. However, that behavior is better and more
+   robustly accomplished with drivers directly on the object/bone's rotation
+   properties, so new rigs should favor that approach over using this option.
+
 Owner
    This constraint allows you to choose in which space evaluate its owner's transform properties.
    See :ref:`common constraint properties <rigging-constraints-interface-common-space>` for more information.

manual/animation/shape_keys/shape_keys_panel.rst

@@ -50,6 +50,7 @@ Active Shape Key Index
       and tools that move vertices abort with an error if the active shape key is locked.
 
       .. note::
+
          Operators that always modify all shape keys in exactly the same way, like
          :ref:`Apply Object Transforms <bpy.ops.object.transform_apply>`, don't check shape key locks.
          Neither currently do most edit mode operators that modify topology, because the topology is

manual/compositing/types/color/rgb_to_bw.rst

@@ -17,6 +17,7 @@ RGB to BW Node
 The *RGB to BW Node* makes a color image black-and-white by outputting its luminance.
 
 .. note::
+
    You can directly connect Color sockets to Value sockets in node graphs,
    which also converts the image to black-and-white. As such, this node is
    not always necessary.

manual/editors/3dview/navigate/regions.rst

@@ -105,6 +105,7 @@ Both Render Regions can exist at the same time.
      - .. figure:: /images/editors_3dview_navigate_regions_render-border-2.png
 
 .. note::
+
    Render regions only apply to the viewport when using Cycles, not when using EEVEE.
    However, they always affect the final render.
 

manual/editors/nla/sidebar.rst

@@ -164,6 +164,7 @@ Lets you manually specify, and animate, the frame at which the underlying action
 is sampled.
 
 .. note::
+
    Although the setting is called *Strip Time*, its value is a frame number
    inside the action, not inside the strip. If you have an action going
    from frame 1 to frame 50 that's referenced by a strip going from frame

manual/editors/outliner/interface.rst

@@ -57,6 +57,7 @@ Display Filter
 
 You can search the view for data-blocks,
 by using Search field in the header of the *Outliner*,
+You can start a search using :kbd:`Ctrl-F` or clear a search with :kbd:`Alt-F`.
 
 
 .. _editors-outliner-interface-filter:

manual/editors/preferences/index.rst

@@ -16,7 +16,6 @@
    :maxdepth: 1
 
    interface.rst
-   themes.rst
    viewport.rst
    lights.rst
    editing.rst
@@ -26,6 +25,7 @@
    :maxdepth: 1
 
    extensions.rst
+   themes.rst
 
 .. toctree::
    :maxdepth: 1

manual/editors/preferences/keymap.rst

@@ -25,11 +25,11 @@ Keymap Presets
 
    .. _bpy.ops.wm.keyconfig_preset_add:
 
-   You add a custom keymap configuration to the preset list by ``LMB`` on the *Add* button ``+``.
+   You add a custom keymap configuration to the preset list by :kbd:`LMB` on the *Add* button ``+``.
 
    .. _bpy.ops.wm.keyconfig_preset_remove:
 
-   You remove a custom keymap configuration from the preset list by ``LMB`` on the *Remove* button ``-``.
+   You remove a custom keymap configuration from the preset list by :kbd:`LMB` on the *Remove* button ``-``.
 
 .. _bpy.ops.preferences.keyconfig_import:
 

manual/editors/preferences/system.rst

@@ -71,6 +71,9 @@ Operating System Settings
 
 Make this installation your default Blender (MS-Windows & Linux only).
 
+On Linux, if Blender is installed from a package manager such as Snap,
+file association is handled by the package manager.
+
 Register
    Make the currently in use Blender installation the default
    for generating thumbnails and the default for opening blend-files.
@@ -81,9 +84,8 @@ For All Users
    Register Blender for all users, requires escalated privileges.
 
 
-.. note::
+.. admonition:: Linux Registration
-
+   :class: note
-   Linux Registration
 
    Files are setup files under: ``/usr/local`` for all users, otherwise ``~/.local`` is used.
 
@@ -92,6 +94,25 @@ For All Users
    - The thumbnailer is installed so blend-file thumbnails will be shown in file managers (**For All Users** only).
 
 
+Network
+=======
+
+.. _bpy.types.PreferencesSystem.use_online_access:
+
+Allow Online Access
+   Allow internet access. Blender may access configured online extension repositories.
+   Installed third party add-ons may access the internet for their own functionality.
+
+Time Out
+   The time (in seconds) that online operations may wait before timing out.
+
+   Use the systems default when zero.
+
+Connection Limit
+   The maximum number of simultaneous connections an online operation may make.
+
+   Do not limit the number of connections when zero.
+
 .. _prefs-system-memory-and-limits:
 
 Memory & Limits

manual/editors/preferences/themes.rst

@@ -1,5 +1,3 @@
-.. _bpy.ops.preferences.theme_install:
-.. _bpy.ops.preferences.reset_default_theme:
 .. _bpy.types.Theme:
 
 ******
@@ -15,12 +13,39 @@ change in the multi-choice list at the left, and adjusting colors as required.
 Notice that changes appear in real-time on your screen. In addition, details such as the dot size
 in the *3D Viewport* or the *Graph Editor* can also be changed.
 
-Themes use Blender's preset system to save a theme.
+Preset Management
+=================
+
+Theme Presets
+   Select the Theme from a list of predefined Themes.
+
+   .. _bpy.ops.wm.interface_theme_preset_add:
+
+   You add a custom theme to the preset list by :kbd:`LMB` on the *Add* button ``+``.
+
+   .. _bpy.ops.wm.interface_theme_preset_remove:
+
+   You remove a custom theme from the preset list by :kbd:`LMB` on the *Remove* button ``-``.
+
+   .. _bpy.ops.wm.interface_theme_preset_save:
+
+   You save a custom theme in the preset list by :kbd:`LMB` on the *Save* button.
+
    This will save the theme to an XML file in the ``./scripts/presets/interface_theme/`` subdirectory of one of
    the :doc:`configuration directories </advanced/blender_directory_layout>`.
 
-.. figure:: /images/editors_preferences_themes_example.png
+.. _bpy.ops.preferences.theme_install:
+
+Install
+   Load and apply a Blender XML theme file and add it to the list of theme presets.
+
+.. _bpy.ops.preferences.reset_default_theme:
+
+Reset
+   Reset to the default theme colors.
 
 Blender comes bundled with a small selection of themes.
 
+.. figure:: /images/editors_preferences_themes_example.png
+
    This is an example of the theme *Blender Light*.

manual/editors/timeline.rst

@@ -153,7 +153,12 @@ Playback
 Play In
    Which editors to update on each animation frame. If an editor is unchecked,
    it'll only be updated once playback stops (with some exceptions where it'll
-   update on each frame anyway).
+   update on each frame anyway). When starting playback in either the
+   :doc:`Graph Editor </editors/graph_editor/introduction>`,
+   :doc:`Dope Sheet </editors/dope_sheet/introduction>` or the
+   :doc:`NLA Editor</editors/nla/introduction>`,
+   all editors will play back regardless of the settings.
+   This is a feature requested by animators to easily play back all views.
 
 .. _bpy.types.Scene.show_subframe:
 

manual/editors/video_sequencer/preview/toolbar.rst

@@ -24,6 +24,7 @@ Cursor
    (works with all tools) or adjust the 2D Cursor Location in :menuselection:`Sidebar --> View`.
 
    .. note::
+
       By default, the 2D Cursor is only shown while dragging it. To make it permanently
       visible, enable the *2D Cursor* :doc:`overlay </editors/video_sequencer/preview/display/overlays>`.
 

manual/files/asset_libraries/catalogs.rst

@@ -18,6 +18,13 @@ see `Asset Catalogs on the Blender Developer Documentation <https://developer.bl
 
 .. figure:: /images/asset-browser-catalogs.png
    :width: 640px
+   :figclass: only-light
+
+   Example file system and catalog structures.
+
+.. figure:: /images/asset-browser-catalogs_dark.png
+   :width: 640px
+   :figclass: only-dark
 
    Example file system and catalog structures.
 

manual/files/blend/open_save.rst

@@ -72,6 +72,8 @@ Open Recent
 Displays a list of recently opened blend-files.
 Hovering over items will show a preview, and information about the blend-file.
 Select any of the file names in the list to open that blend-file.
+When :kbd:`RMB` on a listed item, a context menu will appear; One of the available options is *Open File Location*, which will open that 
+location in an OS file explorer or Finder window.
 
 Clear Recent Files List
    Removes all items from the list.

manual/files/data_blocks.rst

@@ -207,7 +207,7 @@ Pack
      - |none|
      - Particle settings.
        Used by particle systems.
-   * - :doc:`Light Probe </render/eevee/light_probes/introduction>`
+   * - :doc:`Light Probe </render/eevee/light_probes/index>`
      - |tick|
      - |none|
      - Help achieve complex real-time lighting in EEVEE.

manual/files/import_export/collada.rst

@@ -17,6 +17,10 @@ to export/import Collada files from/to a variety of tools.
 But please be aware that the Collada module is still a work in progress.
 So it may be possible that your particular usage scenario is not yet supported.
 
+.. important::
+
+   Collada support in Blender is considered deprecated and may be removed in a future version.
+
 
 Collada Exporter
 ================
@@ -74,15 +78,22 @@ Include Shape Keys
 Global Orientation
 ^^^^^^^^^^^^^^^^^^
 
-Todo.
+Apply
+   Rotate all root objects to match the global orientation settings otherwise set the global orientation per Collada
+   asset.
+
+Forward / Up Axis
+   Since many applications use a different axis for pointing upwards, these are axis conversion for these settings,
+   Forward and up axes -- By mapping these to different axes you can convert rotations
+   between applications default up and forward axes.
+
+   Blender uses Y forward, Z up (since the front view looks along the +Y direction).
+   For example, it is common for applications to use Y as the up axis, in that case -Z forward, Y up is needed.
 
 
 Texture Options
 ^^^^^^^^^^^^^^^
 
-Only Selected UV Map
-   When your mesh contains multiple UV layers, then Blender exports all layers by default.
-   This option allows you to only export the active (selected) UV layer.
 Copy
    When you export images either material based image textures,
    then the exporter creates absolute file references in the export file.
@@ -90,6 +101,9 @@ Copy
    But if the *Copy* option is enabled, the exporter will create copies of the images instead and
    place the copies besides the export file. In that case the file references are made relative.
 
+Only Selected UV Map
+   When your mesh contains multiple UV layers, then Blender exports all layers by default.
+   This option allows you to only export the active (selected) UV layer.
 
 Geometry
 --------

manual/getting_started/installing/macos.rst

@@ -7,6 +7,11 @@ Check the :doc:`Downloading Blender </getting_started/installing/index>`
 page to find the minimum requirements and the different versions that are available
 for Blender (if you have not done so yet).
 
+.. important::
+
+   Blender supports both Intel and Apple Silicon architectures on macOS.
+   Make sure to download a variant that is compatible with your CPU's architecture.
+
 
 Install from DMG
 ================

manual/getting_started/installing/windows.rst

@@ -9,6 +9,11 @@ for Blender (if you have not done so yet).
 
 Download the zip-file or Windows Installer File.
 
+.. important::
+
+   Blender supports both x64 and arm64 architectures on Windows.
+   Make sure to download a variant that is compatible with your CPU's architecture.
+
 
 Install from Windows Installer File
 ===================================

manual/modeling/curves/editing/curve.rst

@@ -161,7 +161,7 @@ Only curves with at least one selected control point will be closed/open.
 The shape of the closing segment is based on the start and end handles for Bézier curves,
 and as usual on adjacent control points for NURBS.
 The only time a handle is adjusted after closing is if the handle is an *Auto* one.
-Fig. :ref:`fig-curves-editing-open-close` is the same Bézier curve open and closed.
+Fig. :ref:`fig-curve-editing-open-close` is the same Bézier curve open and closed.
 
 This action only works on the original starting control point or the last control point added.
 Deleting a segment(s) does not change how the action applies;
@@ -169,7 +169,7 @@ it still operates only on the starting and last control points. This means that
 :kbd:`Alt-C` may actually join two curves instead of closing a single curve!
 Remember that when a 2D curve is closed, it creates a renderable flat face.
 
-.. _fig-curves-editing-open-close:
+.. _fig-curve-editing-open-close:
 
 .. figure:: /images/modeling_curves_editing_curve_open-closed-cyclic.png
 

manual/modeling/curves_new/editing/control_points.rst

@@ -11,6 +11,7 @@ Extrude Curve and Move
 .. reference::
 
    :Mode:      Edit Mode
+   :Menu:      :menuselection:`Control Points --> Extrude Curve and Move`
    :Shortcut:  :kbd:`E`
 
 Extrudes points by duplicating the selected points, which then can be moved,

manual/modeling/geometry_nodes/curve/sample/sample_curve.rst

@@ -78,7 +78,7 @@ Tangent
 
    .. tip::
 
-      This output can be combined with the :doc:`/modeling/geometry_nodes/utilities/rotation/align_euler_to_vector`
+      This output can be combined with the :doc:`/modeling/geometry_nodes/utilities/rotation/align_rotation_to_vector`
       to create a rotation that lines up with direction of the curve. Including the *Normal* output
       in a second align node after can align the other rotation axis.
 

manual/modeling/geometry_nodes/geometry/operations/duplicate_elements.rst

@@ -57,7 +57,7 @@ Geometry
 Duplicate Index
    An attribute field with a value for every output element describing which
    duplicate of the corresponding input. The value for every input element will
-   start at 0 and increase to `Amount - 1`.
+   start at 0 and increase to ``Amount - 1``.
 
 
 Examples

manual/modeling/geometry_nodes/instances/instance_on_points.rst

@@ -67,7 +67,7 @@ Rotation
    :doc:`Distribute Points on Faces </modeling/geometry_nodes/point/distribute_points_on_faces>`
    and :doc:`Curve to Points </modeling/geometry_nodes/curve/operations/curve_to_points>`. An Euler rotation
    can also be created from a direction vector like the :doc:`normal </modeling/geometry_nodes/geometry/read/normal>`
-   with the :doc:`/modeling/geometry_nodes/utilities/rotation/align_euler_to_vector`.
+   with the :doc:`/modeling/geometry_nodes/utilities/rotation/align_rotation_to_vector`.
 
 Scale
    The size of each generated instance.

manual/modeling/geometry_nodes/mesh/operations/mesh_to_volume.rst

@@ -10,7 +10,7 @@ Mesh to Volume Node
    :alt: Mesh to Volume node.
 
 The *Mesh to Volume* node creates a fog volumes based on the shape of a mesh.
-The volume is created with a grid of the name `"density"`.
+The volume is created with a grid of the name ``"density"``.
 
 
 Inputs

manual/modeling/geometry_nodes/mesh/topology/edges_of_vertex.rst

@@ -85,7 +85,7 @@ This way, the most vertical connected edge of each vertex will have the lowest w
 and come first in the list.
 
 Next, in the point domain, we need to calculate the rotation of each cone.
-By using the :doc:`/modeling/geometry_nodes/utilities/rotation/align_euler_to_vector`,
+By using the :doc:`/modeling/geometry_nodes/utilities/rotation/align_rotation_to_vector`,
 the problem gets simplified and we only need to calculate a direction vector.
 
 The direction vector of each cone is the centerpoint of the most vertical neighboring edge

manual/modeling/geometry_nodes/utilities/rotation/align_rotation_to_vector.rst

@@ -1,15 +1,15 @@
-.. index:: Geometry Nodes; Align Euler to Vector
+.. index:: Geometry Nodes; Align Rotation to Vector
-.. _bpy.types.FunctionNodeAlignEulerToVector:
+.. _bpy.types.FunctionNodeAlignRotationToVector:
 
-**************************
+*****************************
-Align Euler to Vector Node
+Align Rotation to Vector Node
-**************************
+*****************************
 
-.. figure:: /images/node-types_FunctionNodeAlignEulerToVector.webp
+.. figure:: /images/node-types_FunctionNodeAlignRotationToVector.webp
    :align: center
-   :alt: Align Euler to Vector node.
+   :alt: Align Rotation to Vector node.
 
-The *Align Euler to Vector* node rotates an Euler rotation into the given direction.
+The *Align Rotation to Vector* node rotates an Euler rotation into the given direction.
 
 
 Inputs

manual/modeling/geometry_nodes/utilities/rotation/index.rst

@@ -6,7 +6,7 @@
 .. toctree::
    :maxdepth: 1
 
-   align_euler_to_vector.rst
+   align_rotation_to_vector.rst
    rotate_rotation.rst
    rotate_vector.rst
    axis_angle_to_rotation.rst

manual/modeling/meshes/editing/mesh/knife_project.rst

@@ -16,6 +16,7 @@ in Edit Mode, and then cuts into the faces there. Afterwards, the resulting geom
 inside the cut gets selected.
 
 .. note::
+
    The cutting objects must be curves or non-manifold meshes (e.g. flat shapes, loose edges).
    :ref:`Select Non-Manifold <bpy.ops.mesh.select_non_manifold>`
    will highlight the cutting edges of mesh objects.

manual/modeling/meshes/import_images_as_planes.rst

@@ -0,0 +1,178 @@
+.. _bpy.ops.image.import_as_mesh_planes:
+
+***********************
+Import Images as Planes
+***********************
+
+.. reference::
+
+   :Menu:      :menuselection:`3D Viewport --> Add --> Image --> Images as Planes`
+
+Imports images and creates planes with them as textures.
+It automates the process of creating a plane, resizing it to fit the dimensions of the image,
+and creating a material with the image texture to it.
+The name of the plane, material, and texture will be derived from the name of the image file.
+
+You can import a single image, multiple images, or an image sequence/movie clip.
+If you choose a single image, it creates one plane; if you choose multiple images,
+it creates as many planes as the number of images you selected, either stacked on top of each other or spaced apart.
+Selecting a movie clip or an image sequence will create a single plane with an animation.
+
+
+Properties
+==========
+
+You can save the current import settings as an :ref:`Operator Preset <ui-presets>`.
+
+
+Options
+-------
+
+Relative Path
+   Set link to the image file using a :ref:`relative file path <files-blend-relative_paths>`.
+
+Force Reload
+   Reload the image file if it already exists as an image data-block.
+
+Animate Image Sequences
+   Import sequentially numbered images as
+   an animated :doc:`image sequence </video_editing/edit/montage/strips/image>` instead of separate planes.
+   They will be imported as a *Clip* texture on a single plane.
+   The frame range will be automatically set but can be changed later.
+
+
+Material
+--------
+
+Images as Planes sets up a material to display the image. You can set the type of material and related settings
+before the import.
+
+Shader
+   :Principled:
+      The material will have a :doc:`Principled BSDF </render/shader_nodes/shader/principled>` shader node
+      with default settings as its main component.
+      An Image Texture node linked to the imported image will be connected to the Base Color of the Principled
+      BSDF node.
+   :Shadeless:
+      A shadeless material is a material that does not respond to light from other objects and always has the same
+      color in any lighting environment.
+      This option creates a material with a node group of a mix between a Diffuse and an Emission shader controlled
+      by a Light Path node.
+   :Emit:
+      The material will have a Principled BSDF shader node as its main component, but the Color output from
+      the Image Texture node will be linked to the Emission input instead of the Base Color.
+
+      Strength
+         Set the strength of the emission.
+
+.. note::
+
+   *Blend Mode* and *Shadow Mode* options are specific to the EEVEE renderer.
+   For a detailed explanation of each option, see :doc:`Material Settings </render/eevee/material_settings>`.
+
+Blend Mode
+   Set the alpha blend mode of the material.
+
+Shadow Mode
+   Set the shadow mode of the material.
+
+Show Backface
+   Show backside of the transparent part.
+
+Backface Culling
+   Hide backside of the plane.
+
+Overwrite Material
+   By default, the name of the new material from the name of the imported image. However, if there is already
+   a material with the same name, Blender will append a number to the name of the material to avoid conflict.
+   This *Override Material* option makes it overwrite the existing material of the same name in that case.
+
+
+Texture
+-------
+
+.. note::
+
+   For a detailed explanation of each option, see :doc:`Image Texture Node </render/shader_nodes/textures/image>`.
+
+Interpolation
+   Set the method to scale the image.
+
+Extension
+   Set how the image is extrapolated past the original bounds.
+
+Alpha
+   Use the alpha channel of the image for transparency.
+
+Auto Refresh
+   Automatically refresh the images in the viewport on frame changes.
+
+
+Transform
+---------
+
+Images as Planes creates the plane at the 3D Cursor's location. With *Offset Planes*, multiple planes will be
+placed with distance intervals set in *Offset*, along the axis set in *Local Axis*, beginning at the 3D Cursor's
+location.
+
+Size Mode
+   Set how the plane's size will be determined.
+
+   :Absolute:
+      The size of the plane will be set based on the height value set in *Height*. The width will be set in direct
+      ratio to the height value. For example, with the default height value of 1 m, an image of 800 × 600 pixels
+      will have a width of 1 / 600 × 800 or 1.33 m.
+
+      Height
+         Set the height of the plane.
+
+   :Camera Relative:
+      The size of the plane will be set to fit or fill the camera frame. This will automatically set the *Align*
+      option to *Face Camera*. Make sure to have an active camera in the scene before the import.
+
+      :Fit:
+         Scale the plane to fit inside the camera frame while preserving the aspect ratio.
+      :Fill:
+         Scale the plane so that it fills the entire camera view while preserving the aspect ratio, but some part of
+         the image can spill outside the camera frame.
+
+   ::abbr:`DPI (Dots per inch)`:
+      The size of the plane will be set based on the pixels per inch value set in *Definition*. With the *Unit System*
+      set to *Metric* and the default definition of 600 DPI, an image of 800 × 600 pixels will have a size of
+      0.0339 × 0.0254 units since 600 pixels are defined as 1 inch (0.0254 m).
+
+      Definition
+         Set the number of pixels to fit in 1 inch.
+
+   :Dots/BU:
+      The size of the plane will be set based on the pixels per Blender Unit set in *Definition*. With the default
+      definition value of 600, an image of 800 × 600 pixels will have a size of 1.33 × 1 units.
+
+      Definition
+         Set the number of pixels to fit in 1 Blender Unit.
+
+Align
+   Set the rotation of the plane.
+
+   :Main Axis:
+      The plane will be aligned to a major axis that is best to face the camera's view direction.
+      If there is no camera in the scene, the plane will face toward Z+ (Up) axis.
+   :Face Camera:
+      Similar to the *Main Axis* but the plane will be rotated to directly face the camera's view direction.
+   :Z- (Down), Y-, X-, Z+ (Up), Y+, X+:
+      The plane will be rotated to face toward the selected axis.
+
+Track Camera
+   Add a :doc:`Locked Track </animation/constraints/tracking/locked_track>` constraint to make the plane always
+   face the camera, even if the camera moves. This option is only available when *Main Axis* or *Face Camera*
+   option is selected in the *Align* menu.
+
+Offset Planes
+   Place multiple planes with an offset. If disabled, all planes will be created at the same location.
+
+Offset Direction
+   Choose a local axis (not the global axis) to offset the planes. For example, if you choose *X+*, the planes
+   will be placed along the positive direction of the plane's local X axis.
+
+Distance
+   Set a distance between each plane.

manual/modeling/meshes/primitives.rst

@@ -48,6 +48,17 @@ It is like a piece of paper lying on a table;
 it is not a three-dimensional object because it is flat and has no thickness.
 Objects that can be created with planes include floors, tabletops, or mirrors.
 
+.. seealso::
+
+   :ref:`Import Images as Planes <bpy.ops.image.import_as_mesh_planes>`
+   adds a mesh plane with materials and texture from an image file.
+   The dimensions of the plane are calculated to match the aspect of the image file.
+
+.. toctree::
+   :hidden:
+
+   import_images_as_planes.rst
+
 
 .. _bpy.ops.mesh.primitive_cube_add:
 
@@ -69,12 +80,9 @@ Vertices
 Fill Type
    Set how the circle will be filled.
 
-   Triangle Fan
+   :Triangle Fan: Fill with triangular faces which share a vertex in the middle.
-      Fill with triangular faces which share a vertex in the middle.
+   :N-gon: Fill with a single :term:`N-gon`.
-   N-gon
+   :Nothing: Do not fill. Creates only the outer ring of vertices.
-      Fill with a single :term:`N-gon`.
-   Nothing
-      Do not fill. Creates only the outer ring of vertices.
 
 
 .. _bpy.ops.mesh.primitive_uv_sphere_add:
@@ -220,13 +228,14 @@ This is intended as a test mesh, similar to:
 - `Utah Teapot <https://en.wikipedia.org/wiki/Utah_teapot>`__
 - `Stanford Bunny <https://en.wikipedia.org/wiki/Stanford_Bunny>`__.
 
-.. hint:: History
+.. admonition:: History
+   :class: tip
 
    This is a gift from old NaN to the community and is seen as a programmer's joke or
    "Easter Egg". It creates a monkey's head once you press the *Monkey* button.
    The Monkey's name is "Suzanne" and is Blender's mascot.
 
-.. note:: Add-ons
+.. note::
 
    In addition to the basic geometric primitives can be added via extensions
    These are available from the :doc:`Preferences </editors/preferences/extensions>`.

manual/modeling/meshes/uv/editing.rst

@@ -35,13 +35,64 @@ Transform
 - Shear :kbd:`Shift-Ctrl-Alt-S`
 
 
-Axis Locking
+.. rubric:: Axis Locking
-------------
 
 Transformations can be locked to an axis by pressing :kbd:`X` or :kbd:`Y` after one of the transform tools.
 Also, holding the :kbd:`MMB` will constrain movement to the X or Y axis.
 
 
+Vertex Slide
+------------
+
+.. reference::
+
+   :Mode:      Edit Mode
+   :Menu:      :menuselection:`UV --> Transform --> Vertex Slide`
+
+Vertex Slide will transform a vertex along one of its adjacent edges.
+Use :kbd:`Shift-V` to activate tool.
+The nearest selected vertex to the mouse cursor will be the control one.
+Move the mouse along the direction of the desired edge to specify the vertex position.
+Then press :kbd:`LMB` to confirm the transformation.
+
+Factor
+   Determines the amount of slide performed.
+   Negative values correspond to slides toward one vertex, while positive ones, refer to the other one.
+Even :kbd:`E`
+   By default, the offset value of the vertices is a percentage of the edges length along which they move.
+   When Even mode is active, the vertices are shifted by an absolute value.
+Flipped :kbd:`F`
+   When Flipped is active, vertices move the same distance from adjacent vertices,
+   instead of moving from their original position.
+Clamp :kbd:`Alt` or :kbd:`C`
+   Toggle clamping the slide within the edge extents.
+
+
+Edge Slide
+----------
+
+.. reference::
+
+   :Mode:      Edit Mode
+   :Menu:      :menuselection:`UV --> Transform --> Edge Slide`
+
+Slides one or more edges across adjacent faces with a few restrictions involving the selection
+of edges (i.e. the selection *must* define a valid loop, see below).
+
+Factor
+   Determines the amount of slide performed.
+   Negative values correspond to slides toward one face, while positive ones, refer to the other one.
+Even :kbd:`E`
+   Forces the edge loop to match the shape of the adjacent edge loop.
+   You can flip to the opposite vertex using :kbd:`F`.
+Flipped :kbd:`F`
+   When Even mode is active, this flips between the two adjacent edge loops the active edge loop will match.
+Clamp :kbd:`Alt` or :kbd:`C`
+   Toggle clamping the slide within the edge extents.
+Mirror Editing
+   Lets you propagate the operation to the symmetrical elements of the mesh (if present, in local X direction).
+
+
 Randomize
 =========
 
@@ -58,16 +109,12 @@ similar to *Randomize Transform* tool in the 3d view.
 Random Seed
    Changes the random :term:`seed` used by the pseudo-random number generator,
    producing a different transform result for each seed value.
-
 Location
    Amount to randomize location.
-
 Rotation
    Amount to randomize rotation.
-
 Scale Even
    Apply the same scale to the U coordinate and V coordinate.
-
 Scale
    Amount to randomize scale in U and V coordinates.
 

manual/modeling/modifiers/introduction.rst

@@ -14,7 +14,8 @@ You can add several modifiers to a single object to form `The Modifier Stack`_
 and *Apply* a modifier if you wish to make its changes permanent.
 
 They can be added to the active object using the :ref:`bpy.ops.object.modifier_add` operator,
-the "Add Modifier" button at the top of Modifiers tab in the :doc:`/editors/properties_editor`, or using :kbd:`Shift-A` in the same tab.
+the "Add Modifier" button at the top of Modifiers tab in the :doc:`/editors/properties_editor`,
+or using :kbd:`Shift-A` in the same tab.
 New modifiers are always added at the bottom of the :ref:`stack <modifier-stack>` (i.e. will be applied last).
 
 There are many built-in modifiers but Blender also allows users

manual/render/cycles/world_settings.rst

@@ -5,8 +5,6 @@
 World Settings
 **************
 
-.. _bpy.types.WorldMistSettings:
-
 Mist Pass
 =========
 
@@ -24,19 +22,13 @@ Mist can greatly enhance the illusion of depth in your rendering. To create mist
 Blender generates a render layer with a depth map ranging between 0.0 and 1.0
 that can be used in the Compositor to generate a mist effect.
 
-.. _bpy.types.WorldMistSettings.start:
-
 Start
    The distance from the camera at which the mist starts to fade in.
 
-.. _bpy.types.WorldMistSettings.depth:
-
 Depth
    The distance from *Start* of the mist, that it fades in over.
    Objects further from the camera than *Start + Depth* are completely hidden by the mist.
 
-.. _bpy.types.WorldMistSettings.falloff:
-
 Falloff
    The curve function that controls the rate of change of the mist's strength further and further into the distance.
 

manual/render/eevee/light_probes/index.rst

@@ -9,7 +9,8 @@ Light probe objects are used by EEVEE as support objects.
 
 There are three different types of light probes.
 Each type of light probe records the lighting at a different resolution and frequency.
-Probes are used together to recover incoming light information when using ray tracing is not possible (either for performance or for technical limitations).
+Probes are used together to recover incoming light information when using ray tracing is not possible
+(either for performance or for technical limitations).
 
 These types of objects are only useful for EEVEE (and by extension, the Material Preview mode).
 

manual/render/eevee/light_probes/plane.rst

@@ -11,8 +11,8 @@ This type of light probe is suited to smooth planar surfaces.
 Each visible planar light probe increases the render time as the scene needs to be rendered for
 each of them.
 
-Light probe planes only work when the ray tracing method is set to `Screen-Trace`. When enabled, they
+Light probe planes only work when the ray tracing method is set to ``Screen-Trace``.
-accelerate the tracing process and complete the missing data from the screen space ray tracing.
+When enabled, they accelerate the tracing process and complete the missing data from the screen space ray tracing.
 
 .. note::
 

manual/render/eevee/light_probes/volume.rst

@@ -74,6 +74,7 @@ Once baked, the data is stored inside the object data-block and can be moved, an
 between blender files.
 
 .. note::
+
    Baking uses the render visibility of the objects in the scene.
 
 During baking, the scene is converted into a different representation to accelerate light transport.
@@ -86,7 +87,7 @@ There are a few way to deal with this issue:
 
 .. tip::
 
-   The internal scene representation can be inspected using the `Debug Value` 3, 4 and 5.
+   The internal scene representation can be inspected using the ``Debug Value`` 3, 4 and 5.
 
 Resolution
 ----------
@@ -105,6 +106,7 @@ Surfel Resolution
    Higher values increase quality, but have a huge impact on memory usage.
 
    .. tip::
+
       A good value is twice the maximum *Resolution*.
 
 

manual/render/eevee/light_settings.rst

@@ -44,7 +44,9 @@ Jitter
    Has a high performance impact as the shadow map cannot be cached and needs to be updated for each render sample.
 
    .. note::
-      The effect isn't visible by default in the viewport. See :ref:`render settings <bpy.types.SceneEEVEE.use_shadow_jitter_viewport>`.
+
+      The effect isn't visible by default in the viewport.
+      See :ref:`render settings <bpy.types.SceneEEVEE.use_shadow_jitter_viewport>`.
 
 .. _bpy.types.Light.shadow_jitter_overblur:
 
@@ -52,6 +54,7 @@ Overblur
    Apply shadow tracing to each jittered sample to reduce under-sampling artifacts.
 
    .. note::
+
       Any value higher than zero will result in a blurrier shadow and is not physically correct.
 
 .. _bpy.types.Light.shadow_filter_radius:
@@ -61,6 +64,7 @@ Filter
    The effective world scale of the filter depends on the shadow map resolution at the shadowed pixel position.
 
    .. note::
+
       Any value bigger than 1px will increase the chances of light leaking artifacts.
 
 .. _bpy.types.Light.shadow_maximum_resolution:
@@ -73,32 +77,40 @@ Resolution Limit
    This property limits the maximum amount of detail that the shadow map can capture.
 
    .. note::
+
       Reducing the shadow map resolution will increase the chances of light leaking artifacts.
 
 .. _bpy.types.Light.use_absolute_resolution:
 
 Absolute Resolution Limit
    Limit the resolution at 1 unit from the light origin instead of relative to the shadowed pixel.
-   This makes :ref:`Resolution Limit <bpy.types.Light.shadow_maximum_resolution>` act as a regular shadow map pixel size.
+   This makes :ref:`Resolution Limit <bpy.types.Light.shadow_maximum_resolution>`
+   act as a regular shadow map pixel size.
 
    .. hint::
 
-      With this option enabled, the following equation can be used to set the *Resolution Limit* with a desired resolution:
+      With this option enabled, the following equation can be used to set the *Resolution Limit*
+      with a desired resolution:
 
       .. math::
+
          resolution\_limit = 2 * \sqrt{2} / resolution
 
-      The :math:`2 * \sqrt{2}` refers to the unit cube diagonal and :math:`resolution` refers to the desired resolution (e.g. 1024px).
+      The :math:`2 * \sqrt{2}` refers to the unit cube diagonal and
+      :math:`resolution` refers to the desired resolution (e.g. 1024px).
 
    .. note::
-      The setting :ref:`Absolute Resolution Limit <bpy.types.Light.use_absolute_resolution>` does not exist for Sun Light.
+
+      The setting :ref:`Absolute Resolution Limit <bpy.types.Light.use_absolute_resolution>`
+      does not exist for Sun Light.
 
 
 Influence
 =========
 
 These parameters modulate the intensity of the light depending on the shader type.
-These are meant for artistic control, and any value other than 1.0 breaks :abbr:`PBR (Physically Based Rendering)` rules.
+These are meant for artistic control, and any value other than 1.0 breaks
+:abbr:`PBR (Physically Based Rendering)` rules.
 
 .. _bpy.types.Light.diffuse_factor:
 
@@ -137,6 +149,7 @@ Distance
    Specifies where light influence will be set to 0.
 
 .. note::
+
    The setting :ref:`Custom Distance <bpy.types.Light.use_custom_distance>` does not exist for Sun Light.
 
 .. seealso::

manual/render/eevee/limitations/index.rst

@@ -1,7 +1,7 @@
 
-#############
+###############
   Limitations
-#############
+###############
 
 .. toctree::
    :maxdepth: 2

manual/render/eevee/limitations/limitations.rst

@@ -26,7 +26,8 @@ Lights
 ======
 
 - Lights can only have one color and do not support light node trees.
-- Unlike in Cycles, the :ref:`Size <bpy.types.SpotLight.shadow_soft_size>` of spot lights does not change the softness of the cone.
+- Unlike in Cycles, the :ref:`Size <bpy.types.SpotLight.shadow_soft_size>`
+  of spot lights does not change the softness of the cone.
 - The area light :ref:`Beam spread <bpy.types.SpotLight.spot_size>` option is not supported.
 
 
@@ -35,7 +36,8 @@ Light Probes
 
 - EEVEE supports up to 128 active light probe spheres.
 - EEVEE supports up to 16 active light probe planes inside the view frustum.
-- Active light probe volumes must fit inside the :ref:`Light Probes Volume Memory Pool <bpy.types.SceneEEVEE.gi_irradiance_pool_size>`.
+- Active light probe volumes must fit inside the
+  :ref:`Light Probes Volume Memory Pool <bpy.types.SceneEEVEE.gi_irradiance_pool_size>`.
 
 Indirect Lighting
 =================
@@ -51,7 +53,8 @@ Shadows
   This can be mitigated by using lower :ref:`step count <bpy.types.SceneEEVEE.shadow_step_count>`, enabling
   :ref:`jitter <bpy.types.Light.use_shadow_jitter>`, or reducing the light shape size.
 - Thin objects (e.g. walls without thickness) might have light leaking on the shadowed side.
-  This can be mitigated by making the object have some thickness or lowering :ref:`Resolution Limit<bpy.types.Light.shadow_maximum_resolution>`.
+  This can be mitigated by making the object have some thickness or lowering
+  :ref:`Resolution Limit<bpy.types.Light.shadow_maximum_resolution>`.
 
 .. _eevee-limitations-volumetrics:
 
@@ -105,7 +108,8 @@ Raytracing
 - Blended materials and materials using raytrace refractions will not appear in dithered materials reflections.
 - Blended materials are not compatible with raytracing.
 - Only one refraction event is correctly modeled.
-  An approximation of the second refraction event can be achieved using the :ref:`Thickness workflow <bpy.types.Material.thickness>`.
+  An approximation of the second refraction event can be achieved using the
+  :ref:`Thickness workflow <bpy.types.Material.thickness>`.
 - Only dithered materials *not* using Raytrace Refractions can be refracted.
 
 

manual/render/eevee/material_settings.rst

@@ -18,7 +18,8 @@ Thickness
 This feature is used to approximate the inner geometry structure of the object without heavy computation.
 This is currently used for Subsurface, Translucent BSDF, Refraction BSDF and the nodes containing them.
 
-If no value is plugged into the output node, a default thickness based on the smallest dimension of the object is computed.
+If no value is plugged into the output node, a default thickness based on the smallest dimension of the object
+is computed.
 If a value is connected it will be used as object space thickness (i.e. scaled by object transform).
 A value of zero will disable the thickness approximation and treat the object as having only one interface.
 
@@ -28,7 +29,8 @@ A value of zero will disable the thickness approximation and treat the object as
    - Shadow casting object will not cast shadow within the thickness distance.
 
 .. tip::
-   - For large or compound meshes (e.g. vegetation), the thickness should be set to the thickness of individual parts (e.g. leaves, grass blades).
+   - For large or compound meshes (e.g. vegetation),
+     the thickness should be set to the thickness of individual parts (e.g. leaves, grass blades).
    - Thickness can be baked to textures or custom attributes for more accurate result.
 
 
@@ -83,11 +85,13 @@ Displacement
       Vertex position is modified.
 
    .. note::
+
       This type of displacement is not precomputed. It has a performance impact multiplied by the
       render sample count. However, the evaluation is much faster than doing it using geometry
       nodes or a displacement modifier.
 
    .. note::
+
       Displacing flat shaded geometry will split adjacent faces.
       This can be worked around by passing the vertex normals as a custom attribute.
 
@@ -128,15 +132,19 @@ Render Method
       .. admonition:: Sorting Problem
          :class: important
 
-         When using *Blended* render method, the order in which the color blending happens is important as it
+         When using *Blended* render method, the order in which the color blending
-         can change the final output color. EEVEE does not support per-fragment (pixel) sorting or per-triangle sorting.
+         happens is important as it can change the final output color.
-         Only per-object sorting is available and is automatically done on all transparent surfaces based on object origin.
+         EEVEE does not support per-fragment (pixel) sorting or per-triangle sorting.
-         Opaque surfaces (i.e. that have no transparency) will still have correct sorting regardless of the render method.
+         Only per-object sorting is available and is automatically done on all
+         transparent surfaces based on object origin.
+         Opaque surfaces (i.e. that have no transparency)
+         will still have correct sorting regardless of the render method.
 
          .. tip::
 
-            Face order can be adjusted in edit mode by using :doc:`sort element </modeling/meshes/editing/mesh/sort_elements>`
+            Face order can be adjusted in edit mode by using
-            or using a :doc:`geometry node </modeling/geometry_nodes/geometry/operations/sort_elements>`.
+            :doc:`sort element </modeling/meshes/editing/mesh/sort_elements>` or using a
+            :doc:`geometry node </modeling/geometry_nodes/geometry/operations/sort_elements>`.
 
       .. note::
 

manual/render/eevee/object_settings/object_data.rst

@@ -23,7 +23,7 @@ Shadow
 Light Probes
 ============
 
-Objects can be set to not be captured by certain :doc:`light probe </render/eevee/light_probes/introduction>`.
+Objects can be set to not be captured by certain :doc:`light probe </render/eevee/light_probes/index>`.
 This can be used, for example, to avoid animated object being recorded into static light probes.
 For instanced objects, visibility is inherited; if the parent object is hidden for some ray types,
 the children will be hidden for these too.

manual/render/eevee/render_settings/clamping.rst

@@ -26,7 +26,8 @@ Indirect Light
 
 .. note::
 
-    These options provide a way to limit :term:`Fireflies` and :term:`Aliasing` of highly reflective surfaces and dense volumes.
+    These options provide a way to limit :term:`Fireflies` and :term:`Aliasing`
+    of highly reflective surfaces and dense volumes.
     However, note that as you clamp out such values, other bright lights will be dimmed as well.
 
     Care must be taken when using this setting to find a balance between mitigating fireflies and

manual/render/eevee/render_settings/performance.rst

@@ -20,7 +20,8 @@ Memory
 .. _bpy.types.SceneEEVEE.shadow_pool_size:
 
 Shadow Pool Size
-   A bigger pool size allows for more shadows in the scene but might not fit into GPU memory and decreases performance.
+   A bigger pool size allows for more shadows in the scene but might not fit into GPU memory and decreases
+   performance.
    Increasing it might fix the *Shadow buffer full* error.
 
    .. seealso::
@@ -29,7 +30,8 @@ Shadow Pool Size
 .. _bpy.types.SceneEEVEE.gi_irradiance_pool_size:
 
 Light Probes Volume Pool Size
-   A bigger pool size allows for more irradiance grids in the scene but might not fit into GPU memory and decreases performance.
+   A bigger pool size allows for more irradiance grids in the scene but might not fit into GPU memory and
+   decreases performance.
 
 
 Viewport

manual/render/eevee/render_settings/raytracing.rst

@@ -15,7 +15,8 @@ This is done by generating ray from each :abbr:`BSDF (Bidirectional Scattering D
 and finding their intersection with the scene individually.
 
 When disabled, it is replaced by a faster pipeline that uses pre-filtered light-probes.
-This fallback mode offers a more visually stable and optimized alternative when visual fidelity is not the primary goal.
+This fallback mode offers a more visually stable and optimized alternative when visual
+fidelity is not the primary goal.
 
 .. seealso::
 
@@ -85,7 +86,8 @@ Fast GI Approximation is a fallback to the ray-tracing pipeline for
 :abbr:`BSDF (Bidirectional Scattering Distribution Function)` with high roughness.
 It produces a less noisy output and captures bounce lighting more efficiently than individually traced rays.
 
-This is currently implemented as a screen space effect and will inherit all associated :ref:`limitations <eevee-limitations-screenspace>`.
+This is currently implemented as a screen space effect and will inherit all associated
+:ref:`limitations <eevee-limitations-screenspace>`.
 
 Method
    Determine the method used to compute the fast GI approximation.
@@ -111,7 +113,8 @@ Steps
    .. tip::
 
       With a higher step count, there is less chance to miss other surfaces that could reflect or block the light.
-      This means that the Fast GI *Thickness* parameters can be tweaked to lower values without losing too much light bounce energy.
+      This means that the Fast GI *Thickness* parameters can be tweaked to lower values without losing too much light
+      bounce energy.
 
 Precision
    Higher values increase the precision of the scene intersections with the GI rays.
@@ -123,7 +126,8 @@ Distance
 Thickness Near
    Geometric thickness of the surfaces when computing fast GI and ambient occlusion.
    Reduces light leaking and missing contact occlusion.
-   The effectiveness decreases proportionally to the distance from the shading point, following the inverse square law.
+   The effectiveness decreases proportionally to the distance from the shading point,
+   following the inverse square law.
 
 Far
    Angular thickness of the surfaces when computing fast GI and ambient occlusion.

manual/render/eevee/render_settings/volumes.rst

@@ -34,8 +34,10 @@ Custom Range
 When working with volume objects, EEVEE automatically computes the best depth range where to compute
 the volume sampling and lighting.
 In certain situations, this isn't enough and produces sub-optimal sampling which increases noise.
-This is particularly the case when using a volume shader inside the *World* or when working with large number of volume objects.
+This is particularly the case when using a volume shader inside the *World* or when working with large
-The custom depth range can be enabled to restrict the computation of volumes to a certain range along the camera depth and thus increase precision.
+number of volume objects.
+The custom depth range can be enabled to restrict the computation of volumes to a certain range along
+the camera depth and thus increase precision.
 
 Start
    Start distance of the volumetric effect.

manual/render/eevee/world_settings.rst

@@ -6,9 +6,13 @@ World Settings
 The world environment can emit light, ranging from a single solid color
 to arbitrary textures.
 
-In EEVEE, the world lighting contribution is stored into an internal :doc:`Light Probe </render/eevee/light_probes/index>`.
+In EEVEE, the world lighting contribution is stored into an internal
+:doc:`Light Probe </render/eevee/light_probes/index>`.
 This makes the lighting less precise than Cycles.
 
+
+.. _bpy.types.WorldMistSettings:
+
 Mist Pass
 =========
 
@@ -83,7 +87,8 @@ Resolution
 Sun
 ---
 
-EEVEE can separate the light from intense light sources (e.g. a sun from an outdoor :abbr:`HDRI (High Dynamic Range Imaging)`) and
+EEVEE can separate the light from intense light sources
+(e.g. a sun from an outdoor :abbr:`HDRI (High Dynamic Range Imaging)`) and
 replace them with a sun light. This increases the quality of the lighting as the internal light probes
 alone cannot reproduce this type of lighting with enough precision.
 

manual/scene_layout/object/types.rst

@@ -52,9 +52,13 @@ New objects can be created with the *Add* menu in the 3D Viewport's header.
    Empty objects that display images in the 3D Viewport.
    These images can be used to aid artists in modeling or animating.
 
+   Image Plane
+      Adds a :ref:`mesh plane <bpy.ops.mesh.primitive_plane_add>` with materials and texture from an image file.
+      The dimensions of the plane are calculated to match the aspect of the image file.
+
 :doc:`Light </render/lights/light_object>`
    Empty objects that emit light and are used for lighting the scene in renders.
-:doc:`Light Probe </render/eevee/light_probes/introduction>`
+:doc:`Light Probe </render/eevee/light_probes/index>`
    Used by the EEVEE render engine to record lighting information for indirect lighting.
 
 :doc:`Camera </render/cameras>`
@@ -84,17 +88,15 @@ Type
    You can change the type of some objects after their creation with a selector.
 Radius/Size
    Sets the starting size.
-
 Align
    Rotates the new object so that it is aligned in one of the following manners:
 
-   World
+   :World:
       Aligns the object to the global space axes, i.e. the object's front faces the negative Y axis (default).
-   View
+   :View:
       Aligns the object to the view space axes, i.e. the object's front faces the viewport's point of view.
-   3D Cursor
+   :3D Cursor:
       Aligns the object to match the rotation of the :doc:`3D Cursor </editors/3dview/3d_cursor>`.
-
 Location
    Objects are placed, by default, at the position of the 3D Cursor.
    These values let you place the object in an other position.

manual/scene_layout/scene/properties.rst

@@ -38,7 +38,7 @@ Background Scene
 .. _bpy.types.Scene.active_clip:
 
 Active Clip
-   Selects a :doc:`Movie Clip </movie_clip/introduction>` that can be used by
+   Selects a :doc:`Movie Clip </movie_clip/index>` that can be used by
    :ref:`constraints-motion-tracking` Constraints or a camera's :ref:`bpy.types.CameraBackgroundImage`.
 
 

manual/sculpt_paint/sculpting/editing/mask.rst

@@ -73,8 +73,7 @@ Box Mask
    :Menu:      :menuselection:`Mask --> Box Mask`
    :Shortcut:  :kbd:`B`
 
-Works like the :doc:`Box Mask </sculpt_paint/sculpting/tools/box_mask>` tool,
+Works like the :ref:`Box Mask <tool-box-mask>` tool, it creates a rectangular mask region.
-it creates a rectangular mask region.
 Hold :kbd:`Shift` or press :kbd:`MMB` to clear the mask of the selected region.
 
 
@@ -89,8 +88,7 @@ Lasso Mask
    :Menu:      :menuselection:`Mask --> Lasso Mask`
    :Shortcut:  :kbd:`Shift-Ctrl-LMB`
 
-Can be used to create a free-form mask, similar to the
+Can be used to create a free-form mask, similar to the :ref:`Lasso Mask <tool-lasso-mask>` tool.
-:doc:`Lasso Mask </sculpt_paint/sculpting/tools/box_mask>` tool.
 This is very commonly used.
 
 .. tip::
@@ -197,7 +195,7 @@ Fill Holes
    .. tip::
 
       If nothing is masked, this operation can be used to just fill all holes.
-      Especially when using :doc:`Trim </sculpt_paint/sculpting/tools/lasso_trim>`
+      Especially when using :doc:`Trim Tools </sculpt_paint/sculpting/tools/trim_tools>`
       tools and the :doc:`Voxel Remesher </sculpt_paint/sculpting/tool_settings/remesh>`
 
    ..

manual/sculpt_paint/sculpting/editing/sculpt.rst

@@ -83,18 +83,18 @@ sculpting with the :doc:`voxel remesher </sculpt_paint/sculpting/tool_settings/r
 
 .. _bpy.ops.sculpt.trim_box_gesture:
 
-:doc:`/sculpt_paint/sculpting/tools/box_trim`
+:ref:`tool-box-trim`
    Removes geometry based on a :ref:`box selection <tool-select-box>`.
 
 .. _bpy.ops.sculpt.trim_lasso_gesture:
 
-:doc:`/sculpt_paint/sculpting/tools/lasso_trim`
+:ref:`tool-lasso-trim`
    Removes geometry based on a :ref:`lasso selection <tool-select-lasso>`.
 
-:doc:`Box Add </sculpt_paint/sculpting/tools/box_trim>`
+:ref:`Box Add <tool-box-trim>`
    Adds geometry based on a :ref:`box selection <tool-select-box>`.
 
-:doc:`Lasso Add </sculpt_paint/sculpting/tools/lasso_trim>`
+:ref:`Lasso Add <tool-lasso-trim>`
    Adds geometry based on a :ref:`lasso selection <tool-select-lasso>`.
 
 .. _bpy.ops.sculpt.project_line_gesture:

manual/sculpt_paint/sculpting/introduction/brush.rst

@@ -20,9 +20,8 @@ The inner ring of the brush cursor is used to visualize the strength of the brus
     :doc:`Scrape </sculpt_paint/sculpting/tools/scrape>` brush.
 
 The brush is also used for other :doc:`tools </sculpt_paint/sculpting/tools/index>` in the toolbar
-to better display how that tool works.
+to better display how that tool works. For example, the :ref:`Box Trim <tool-box-trim>`
-For example, the :doc:`Box Trim </sculpt_paint/sculpting/tools/box_trim>`
+and :ref:`Lasso Trim <tool-lasso-trim>` tools are able to use the current brush radius
-and :doc:`Lasso Trim </sculpt_paint/sculpting/tools/lasso_trim>` tools are able to use the current brush radius
 for how deep geometry is trimmed or added.