Flamenco Worker: Error stating " output uploader: file a format I cannot decode, ignoring it" #112364

New Issue

Aditya-28 · 2023-09-14T10:18:57+02:00

Aditya-28 commented

2023-09-14 10:18:57 +02:00

System Information
Operating system: Windows 10, On all Machine's
Graphics card: NVIDIA GeForce RTX 3060

Blender/Flamenco Version
All machines:
Blender: version: 3.6.2 Lts
Flamenco: Flamenco arch=amd64 version=3.2

Short description of error
When Flamenco-worker finishes render and uploads the .exr image, message in the worker CLI says ERR output uploader: file a format I cannot decode, ignoring it image="W:\Software and Tutorials\Software\Blender\Test Aditya\Cube_Flamenco_Render\Render\Simple_Cube\2023-09-14_133052\000002.exr".

Output format for my blender file was 'MultLayer EXR', all the workers had same error.

That particular rendered file is saved properly in folder but This stop the rendering process and the rest frames are not picked up directly, Than i have to manually set other frame for the worker.

Error message from Worker 1
2023-09-14T13:31:16+05:30 INF starting Flamenco Worker ARCH=amd64 OS=windows git=v3.1-96-ga692444f pid=15180 releaseCycle=release version=3.2 2023-09-14T13:31:26+05:30 WRN command timed out commandline="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe" timeout=10s 2023-09-14T13:31:26+05:30 WRN there was an issue finding Blender on this system, Flamenco Manager will have to supply a full path cause="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe: version check took too long" 2023-09-14T13:31:28+05:30 INF FFmpeg found on this system path="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Software\\flamenco-3.2-windows-amd64\\tools\\ffmpeg-windows-amd64.exe" version=5.0.1-essentials_build-www.gyan.dev 2023-09-14T13:31:28+05:30 INF auto-discovering Manager via UPnP/SSDP timeout=10m0s 2023-09-14T13:31:30+05:30 INF found Flamenco Manager name=Flamenco url=http://192.168.151.26:8080/ version=3.2 2023-09-14T13:31:30+05:30 INF found Manager url=http://192.168.151.26:8080/ 2023-09-14T13:31:30+05:30 INF loaded configuration config={"ConfiguredManager":"","ManagerURL":"http://192.168.151.26:8080/","TaskTypes":["blender","ffmpeg","file-management","misc"]} 2023-09-14T13:31:30+05:30 INF loaded credentials filename="C:\\Users\\Viz20\\AppData\\Local\\Blender Foundation\\Flamenco\\flamenco-worker-credentials.yaml" 2023-09-14T13:31:30+05:30 INF signing on at Manager manager=http://192.168.151.26:8080/ name=viz20 softwareVersion=3.2 taskTypes=["blender","ffmpeg","file-management","misc"] 2023-09-14T13:31:30+05:30 WRN unable to sign on at Manager code=403 resp={"code":0,"message":"Security requirements failed"} 2023-09-14T13:31:30+05:30 INF registered at Manager code=200 resp={"address":"192.168.151.28","name":"viz20","platform":"windows","software":"","status":"","supported_task_types":["blender","ffmpeg","file-management","misc"],"uuid":"ea6ae280-7eb8-41e7-acfb-fcd81b6439f2"} 2023-09-14T13:31:30+05:30 INF Saved configuration file filename="C:\\Users\\Viz20\\AppData\\Local\\Blender Foundation\\Flamenco\\flamenco-worker-credentials.yaml" 2023-09-14T13:31:30+05:30 INF signing on at Manager manager=http://192.168.151.26:8080/ name=viz20 softwareVersion=3.2 taskTypes=["blender","ffmpeg","file-management","misc"] 2023-09-14T13:31:30+05:30 INF manager accepted sign-on startup_state=awake 2023-09-14T13:31:30+05:30 INF opening database dsn="C:\\Users\\Viz20\\AppData\\Local\\Blender Foundation\\Flamenco\\flamenco-worker.sqlite" 2023-09-14T13:31:30+05:30 INF flushing upstream buffer queueSize=1 2023-09-14T13:31:30+05:30 WRN queued task update discarded by Manager, unknown reason response={"code":404,"message":"task 23f6fa20-71d7-42c1-97e9-b05a3fa15499 not found"} statusCode=404 task=23f6fa20-71d7-42c1-97e9-b05a3fa15499 2023-09-14T13:31:30+05:30 INF output uploader: running 2023-09-14T13:31:30+05:30 INF state change curState=starting newState=awake 2023-09-14T13:31:30+05:30 INF obtained task task={"commands":[{"name":"blender-render","parameters":{"args":["--render-output","W:/Software and Tutorials/Software/Blender/Test Aditya/Cube_Flamenco_Render/Render/Simple_Cube/2023-09-14_133052/######","--render-format","OPEN_EXR_MULTILAYER","--render-frame","1"],"argsBefore":[],"blendfile":"W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Project\\Simple_Cube.flamenco.blend","exe":"blender","exeArgs":"-b -y"}}],"job":"62ed2515-6e4b-4565-a530-41a1983eea27","job_priority":1,"job_type":"simple-blender-render","name":"render-1","priority":50,"status":"active","task_type":"blender","uuid":"6e71f0fe-bae1-4c97-a2d2-72d8fe164aad"} 2023-09-14T13:31:30+05:30 INF starting task job=62ed2515-6e4b-4565-a530-41a1983eea27 task=6e71f0fe-bae1-4c97-a2d2-72d8fe164aad taskType=blender 2023-09-14T13:31:30+05:30 INF running Flamenco command command=blender-render parameters={"args":["--render-output","W:/Software and Tutorials/Software/Blender/Test Aditya/Cube_Flamenco_Render/Render/Simple_Cube/2023-09-14_133052/######","--render-format","OPEN_EXR_MULTILAYER","--render-frame","1"],"argsBefore":[],"blendfile":"W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Project\\Simple_Cube.flamenco.blend","exe":"blender","exeArgs":"-b -y"} task=6e71f0fe-bae1-4c97-a2d2-72d8fe164aad 2023-09-14T13:31:30+05:30 INF found Blender command=blender-render path="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe" task=6e71f0fe-bae1-4c97-a2d2-72d8fe164aad 2023-09-14T13:31:30+05:30 INF going to execute Blender cmdName=blender-render command=blender-render execCmd="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe -b -y W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Project\\Simple_Cube.flamenco.blend --render-output W:/Software and Tutorials/Software/Blender/Test Aditya/Cube_Flamenco_Render/Render/Simple_Cube/2023-09-14_133052/###### --render-format OPEN_EXR_MULTILAYER --render-frame 1" task=6e71f0fe-bae1-4c97-a2d2-72d8fe164aad 2023-09-14T13:32:36+05:30 INF output produced command=blender-render outputFile="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000001.exr" task=6e71f0fe-bae1-4c97-a2d2-72d8fe164aad 2023-09-14T13:32:36+05:30 INF output uploader: processing file before uploading to Manager image="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000001.exr" task=6e71f0fe-bae1-4c97-a2d2-72d8fe164aad 2023-09-14T13:32:36+05:30 INF output uploader: file a format I cannot decode, ignoring it image="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000001.exr"

Error message from Worker 2
2023-09-14T13:31:26+05:30 INF starting Flamenco Worker ARCH=amd64 OS=windows git=v3.1-96-ga692444f pid=6368 releaseCycle=release version=3.2 2023-09-14T13:31:28+05:30 INF Blender found on this system, it will be used unless Flamenco Manager specifies a path to a different Blender path="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe" version="Blender 3.6.2" 2023-09-14T13:31:29+05:30 INF FFmpeg found on this system path="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Software\\flamenco-3.2-windows-amd64\\tools\\ffmpeg-windows-amd64.exe" version=5.0.1-essentials_build-www.gyan.dev 2023-09-14T13:31:29+05:30 INF auto-discovering Manager via UPnP/SSDP timeout=10m0s 2023-09-14T13:31:32+05:30 INF found Flamenco Manager name=Flamenco url=http://127.0.0.1:8080/ version=3.2 2023-09-14T13:31:32+05:30 INF found Flamenco Manager name=Flamenco url=http://[::1]:8080/ version=3.2 2023-09-14T13:31:32+05:30 INF found Flamenco Manager name=Flamenco url=http://192.168.151.26:8080/ version=3.2 2023-09-14T13:31:32+05:30 INF found multiple usable URLs, using the first one url=http://192.168.151.26:8080/ urls=["http://192.168.151.26:8080/","http://127.0.0.1:8080/","http://[::1]:8080/"] 2023-09-14T13:31:32+05:30 INF loaded configuration config={"ConfiguredManager":"","ManagerURL":"http://192.168.151.26:8080/","TaskTypes":["blender","ffmpeg","file-management","misc"]} 2023-09-14T13:31:32+05:30 INF loaded credentials filename="C:\\Users\\viz17\\AppData\\Local\\Blender Foundation\\Flamenco\\flamenco-worker-credentials.yaml" 2023-09-14T13:31:32+05:30 INF signing on at Manager manager=http://192.168.151.26:8080/ name=viz17 softwareVersion=3.2 taskTypes=["blender","ffmpeg","file-management","misc"] 2023-09-14T13:31:32+05:30 WRN unable to sign on at Manager code=403 resp={"code":0,"message":"Security requirements failed"} 2023-09-14T13:31:32+05:30 INF registered at Manager code=200 resp={"address":"192.168.151.26","name":"viz17","platform":"windows","software":"","status":"","supported_task_types":["blender","ffmpeg","file-management","misc"],"uuid":"1660fe9b-da99-4571-967d-9b9a64f86fa5"} 2023-09-14T13:31:32+05:30 INF Saved configuration file filename="C:\\Users\\viz17\\AppData\\Local\\Blender Foundation\\Flamenco\\flamenco-worker-credentials.yaml" 2023-09-14T13:31:32+05:30 INF signing on at Manager manager=http://192.168.151.26:8080/ name=viz17 softwareVersion=3.2 taskTypes=["blender","ffmpeg","file-management","misc"] 2023-09-14T13:31:32+05:30 INF manager accepted sign-on startup_state=awake 2023-09-14T13:31:32+05:30 INF opening database dsn="C:\\Users\\viz17\\AppData\\Local\\Blender Foundation\\Flamenco\\flamenco-worker.sqlite" 2023-09-14T13:31:32+05:30 INF state change curState=starting newState=awake 2023-09-14T13:31:32+05:30 INF output uploader: running 2023-09-14T13:31:32+05:30 INF obtained task task={"commands":[{"name":"blender-render","parameters":{"args":["--render-output","W:/Software and Tutorials/Software/Blender/Test Aditya/Cube_Flamenco_Render/Render/Simple_Cube/2023-09-14_133052/######","--render-format","OPEN_EXR_MULTILAYER","--render-frame","2"],"argsBefore":[],"blendfile":"W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Project\\Simple_Cube.flamenco.blend","exe":"blender","exeArgs":"-b -y"}}],"job":"62ed2515-6e4b-4565-a530-41a1983eea27","job_priority":1,"job_type":"simple-blender-render","name":"render-2","priority":50,"status":"active","task_type":"blender","uuid":"d8d3a908-78c4-4e35-bdc6-12418d25ca8f"} 2023-09-14T13:31:32+05:30 INF starting task job=62ed2515-6e4b-4565-a530-41a1983eea27 task=d8d3a908-78c4-4e35-bdc6-12418d25ca8f taskType=blender 2023-09-14T13:31:32+05:30 INF running Flamenco command command=blender-render parameters={"args":["--render-output","W:/Software and Tutorials/Software/Blender/Test Aditya/Cube_Flamenco_Render/Render/Simple_Cube/2023-09-14_133052/######","--render-format","OPEN_EXR_MULTILAYER","--render-frame","2"],"argsBefore":[],"blendfile":"W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Project\\Simple_Cube.flamenco.blend","exe":"blender","exeArgs":"-b -y"} task=d8d3a908-78c4-4e35-bdc6-12418d25ca8f 2023-09-14T13:31:32+05:30 INF found Blender command=blender-render path="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe" task=d8d3a908-78c4-4e35-bdc6-12418d25ca8f 2023-09-14T13:31:32+05:30 INF going to execute Blender cmdName=blender-render command=blender-render execCmd="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe -b -y W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Project\\Simple_Cube.flamenco.blend --render-output W:/Software and Tutorials/Software/Blender/Test Aditya/Cube_Flamenco_Render/Render/Simple_Cube/2023-09-14_133052/###### --render-format OPEN_EXR_MULTILAYER --render-frame 2" task=d8d3a908-78c4-4e35-bdc6-12418d25ca8f 2023-09-14T13:32:18+05:30 INF output produced command=blender-render outputFile="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000002.exr" task=d8d3a908-78c4-4e35-bdc6-12418d25ca8f 2023-09-14T13:32:18+05:30 INF output uploader: processing file before uploading to Manager image="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000002.exr" task=d8d3a908-78c4-4e35-bdc6-12418d25ca8f 2023-09-14T13:32:18+05:30 INF output uploader: file a format I cannot decode, ignoring it image="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000002.exr"

Exact steps for others to reproduce the error
As mentioned above, manager was on Windows, worker 2 was on same Windows machine, and worker 1 was on different windows machine but same network.
Shared storage was on Server machine same network.

Set render file format of blender file to MultiLayer OpenEXR
Run manager, worker(s), and submit .blend file to Flamenco.
If rendering itself is successful, this error will be raised while uploading render results to the manager.

@dr.sybren

System Information Operating system: Windows 10, On all Machine's Graphics card: NVIDIA GeForce RTX 3060 Blender/Flamenco Version All machines: Blender: version: 3.6.2 Lts Flamenco: Flamenco arch=amd64 version=3.2 Short description of error When Flamenco-worker finishes render and uploads the .exr image, message in the worker CLI says ERR output uploader: file a format I cannot decode, ignoring it image="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000002.exr". Output format for my blender file was 'MultLayer EXR', all the workers had same error. That particular rendered file is saved properly in folder but This stop the rendering process and the rest frames are not picked up directly, Than i have to manually set other frame for the worker. Error message from Worker 1 `2023-09-14T13:31:16+05:30 INF starting Flamenco Worker ARCH=amd64 OS=windows git=v3.1-96-ga692444f pid=15180 releaseCycle=release version=3.2 2023-09-14T13:31:26+05:30 WRN command timed out commandline="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe" timeout=10s 2023-09-14T13:31:26+05:30 WRN there was an issue finding Blender on this system, Flamenco Manager will have to supply a full path cause="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe: version check took too long" 2023-09-14T13:31:28+05:30 INF FFmpeg found on this system path="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Software\\flamenco-3.2-windows-amd64\\tools\\ffmpeg-windows-amd64.exe" version=5.0.1-essentials_build-www.gyan.dev 2023-09-14T13:31:28+05:30 INF auto-discovering Manager via UPnP/SSDP timeout=10m0s 2023-09-14T13:31:30+05:30 INF found Flamenco Manager name=Flamenco url=http://192.168.151.26:8080/ version=3.2 2023-09-14T13:31:30+05:30 INF found Manager url=http://192.168.151.26:8080/ 2023-09-14T13:31:30+05:30 INF loaded configuration config={"ConfiguredManager":"","ManagerURL":"http://192.168.151.26:8080/","TaskTypes":["blender","ffmpeg","file-management","misc"]} 2023-09-14T13:31:30+05:30 INF loaded credentials filename="C:\\Users\\Viz20\\AppData\\Local\\Blender Foundation\\Flamenco\\flamenco-worker-credentials.yaml" 2023-09-14T13:31:30+05:30 INF signing on at Manager manager=http://192.168.151.26:8080/ name=viz20 softwareVersion=3.2 taskTypes=["blender","ffmpeg","file-management","misc"] 2023-09-14T13:31:30+05:30 WRN unable to sign on at Manager code=403 resp={"code":0,"message":"Security requirements failed"} 2023-09-14T13:31:30+05:30 INF registered at Manager code=200 resp={"address":"192.168.151.28","name":"viz20","platform":"windows","software":"","status":"","supported_task_types":["blender","ffmpeg","file-management","misc"],"uuid":"ea6ae280-7eb8-41e7-acfb-fcd81b6439f2"} 2023-09-14T13:31:30+05:30 INF Saved configuration file filename="C:\\Users\\Viz20\\AppData\\Local\\Blender Foundation\\Flamenco\\flamenco-worker-credentials.yaml" 2023-09-14T13:31:30+05:30 INF signing on at Manager manager=http://192.168.151.26:8080/ name=viz20 softwareVersion=3.2 taskTypes=["blender","ffmpeg","file-management","misc"] 2023-09-14T13:31:30+05:30 INF manager accepted sign-on startup_state=awake 2023-09-14T13:31:30+05:30 INF opening database dsn="C:\\Users\\Viz20\\AppData\\Local\\Blender Foundation\\Flamenco\\flamenco-worker.sqlite" 2023-09-14T13:31:30+05:30 INF flushing upstream buffer queueSize=1 2023-09-14T13:31:30+05:30 WRN queued task update discarded by Manager, unknown reason response={"code":404,"message":"task 23f6fa20-71d7-42c1-97e9-b05a3fa15499 not found"} statusCode=404 task=23f6fa20-71d7-42c1-97e9-b05a3fa15499 2023-09-14T13:31:30+05:30 INF output uploader: running 2023-09-14T13:31:30+05:30 INF state change curState=starting newState=awake 2023-09-14T13:31:30+05:30 INF obtained task task={"commands":[{"name":"blender-render","parameters":{"args":["--render-output","W:/Software and Tutorials/Software/Blender/Test Aditya/Cube_Flamenco_Render/Render/Simple_Cube/2023-09-14_133052/######","--render-format","OPEN_EXR_MULTILAYER","--render-frame","1"],"argsBefore":[],"blendfile":"W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Project\\Simple_Cube.flamenco.blend","exe":"blender","exeArgs":"-b -y"}}],"job":"62ed2515-6e4b-4565-a530-41a1983eea27","job_priority":1,"job_type":"simple-blender-render","name":"render-1","priority":50,"status":"active","task_type":"blender","uuid":"6e71f0fe-bae1-4c97-a2d2-72d8fe164aad"} 2023-09-14T13:31:30+05:30 INF starting task job=62ed2515-6e4b-4565-a530-41a1983eea27 task=6e71f0fe-bae1-4c97-a2d2-72d8fe164aad taskType=blender 2023-09-14T13:31:30+05:30 INF running Flamenco command command=blender-render parameters={"args":["--render-output","W:/Software and Tutorials/Software/Blender/Test Aditya/Cube_Flamenco_Render/Render/Simple_Cube/2023-09-14_133052/######","--render-format","OPEN_EXR_MULTILAYER","--render-frame","1"],"argsBefore":[],"blendfile":"W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Project\\Simple_Cube.flamenco.blend","exe":"blender","exeArgs":"-b -y"} task=6e71f0fe-bae1-4c97-a2d2-72d8fe164aad 2023-09-14T13:31:30+05:30 INF found Blender command=blender-render path="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe" task=6e71f0fe-bae1-4c97-a2d2-72d8fe164aad 2023-09-14T13:31:30+05:30 INF going to execute Blender cmdName=blender-render command=blender-render execCmd="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe -b -y W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Project\\Simple_Cube.flamenco.blend --render-output W:/Software and Tutorials/Software/Blender/Test Aditya/Cube_Flamenco_Render/Render/Simple_Cube/2023-09-14_133052/###### --render-format OPEN_EXR_MULTILAYER --render-frame 1" task=6e71f0fe-bae1-4c97-a2d2-72d8fe164aad 2023-09-14T13:32:36+05:30 INF output produced command=blender-render outputFile="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000001.exr" task=6e71f0fe-bae1-4c97-a2d2-72d8fe164aad 2023-09-14T13:32:36+05:30 INF output uploader: processing file before uploading to Manager image="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000001.exr" task=6e71f0fe-bae1-4c97-a2d2-72d8fe164aad 2023-09-14T13:32:36+05:30 INF output uploader: file a format I cannot decode, ignoring it image="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000001.exr" ` Error message from Worker 2 `2023-09-14T13:31:26+05:30 INF starting Flamenco Worker ARCH=amd64 OS=windows git=v3.1-96-ga692444f pid=6368 releaseCycle=release version=3.2 2023-09-14T13:31:28+05:30 INF Blender found on this system, it will be used unless Flamenco Manager specifies a path to a different Blender path="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe" version="Blender 3.6.2" 2023-09-14T13:31:29+05:30 INF FFmpeg found on this system path="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Software\\flamenco-3.2-windows-amd64\\tools\\ffmpeg-windows-amd64.exe" version=5.0.1-essentials_build-www.gyan.dev 2023-09-14T13:31:29+05:30 INF auto-discovering Manager via UPnP/SSDP timeout=10m0s 2023-09-14T13:31:32+05:30 INF found Flamenco Manager name=Flamenco url=http://127.0.0.1:8080/ version=3.2 2023-09-14T13:31:32+05:30 INF found Flamenco Manager name=Flamenco url=http://[::1]:8080/ version=3.2 2023-09-14T13:31:32+05:30 INF found Flamenco Manager name=Flamenco url=http://192.168.151.26:8080/ version=3.2 2023-09-14T13:31:32+05:30 INF found multiple usable URLs, using the first one url=http://192.168.151.26:8080/ urls=["http://192.168.151.26:8080/","http://127.0.0.1:8080/","http://[::1]:8080/"] 2023-09-14T13:31:32+05:30 INF loaded configuration config={"ConfiguredManager":"","ManagerURL":"http://192.168.151.26:8080/","TaskTypes":["blender","ffmpeg","file-management","misc"]} 2023-09-14T13:31:32+05:30 INF loaded credentials filename="C:\\Users\\viz17\\AppData\\Local\\Blender Foundation\\Flamenco\\flamenco-worker-credentials.yaml" 2023-09-14T13:31:32+05:30 INF signing on at Manager manager=http://192.168.151.26:8080/ name=viz17 softwareVersion=3.2 taskTypes=["blender","ffmpeg","file-management","misc"] 2023-09-14T13:31:32+05:30 WRN unable to sign on at Manager code=403 resp={"code":0,"message":"Security requirements failed"} 2023-09-14T13:31:32+05:30 INF registered at Manager code=200 resp={"address":"192.168.151.26","name":"viz17","platform":"windows","software":"","status":"","supported_task_types":["blender","ffmpeg","file-management","misc"],"uuid":"1660fe9b-da99-4571-967d-9b9a64f86fa5"} 2023-09-14T13:31:32+05:30 INF Saved configuration file filename="C:\\Users\\viz17\\AppData\\Local\\Blender Foundation\\Flamenco\\flamenco-worker-credentials.yaml" 2023-09-14T13:31:32+05:30 INF signing on at Manager manager=http://192.168.151.26:8080/ name=viz17 softwareVersion=3.2 taskTypes=["blender","ffmpeg","file-management","misc"] 2023-09-14T13:31:32+05:30 INF manager accepted sign-on startup_state=awake 2023-09-14T13:31:32+05:30 INF opening database dsn="C:\\Users\\viz17\\AppData\\Local\\Blender Foundation\\Flamenco\\flamenco-worker.sqlite" 2023-09-14T13:31:32+05:30 INF state change curState=starting newState=awake 2023-09-14T13:31:32+05:30 INF output uploader: running 2023-09-14T13:31:32+05:30 INF obtained task task={"commands":[{"name":"blender-render","parameters":{"args":["--render-output","W:/Software and Tutorials/Software/Blender/Test Aditya/Cube_Flamenco_Render/Render/Simple_Cube/2023-09-14_133052/######","--render-format","OPEN_EXR_MULTILAYER","--render-frame","2"],"argsBefore":[],"blendfile":"W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Project\\Simple_Cube.flamenco.blend","exe":"blender","exeArgs":"-b -y"}}],"job":"62ed2515-6e4b-4565-a530-41a1983eea27","job_priority":1,"job_type":"simple-blender-render","name":"render-2","priority":50,"status":"active","task_type":"blender","uuid":"d8d3a908-78c4-4e35-bdc6-12418d25ca8f"} 2023-09-14T13:31:32+05:30 INF starting task job=62ed2515-6e4b-4565-a530-41a1983eea27 task=d8d3a908-78c4-4e35-bdc6-12418d25ca8f taskType=blender 2023-09-14T13:31:32+05:30 INF running Flamenco command command=blender-render parameters={"args":["--render-output","W:/Software and Tutorials/Software/Blender/Test Aditya/Cube_Flamenco_Render/Render/Simple_Cube/2023-09-14_133052/######","--render-format","OPEN_EXR_MULTILAYER","--render-frame","2"],"argsBefore":[],"blendfile":"W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Project\\Simple_Cube.flamenco.blend","exe":"blender","exeArgs":"-b -y"} task=d8d3a908-78c4-4e35-bdc6-12418d25ca8f 2023-09-14T13:31:32+05:30 INF found Blender command=blender-render path="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe" task=d8d3a908-78c4-4e35-bdc6-12418d25ca8f 2023-09-14T13:31:32+05:30 INF going to execute Blender cmdName=blender-render command=blender-render execCmd="W:\\Software and Tutorials\\Software\\Blender\\blender-3.6.2-windows-x64\\blender-3.6.2-windows-x64\\blender.exe -b -y W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Project\\Simple_Cube.flamenco.blend --render-output W:/Software and Tutorials/Software/Blender/Test Aditya/Cube_Flamenco_Render/Render/Simple_Cube/2023-09-14_133052/###### --render-format OPEN_EXR_MULTILAYER --render-frame 2" task=d8d3a908-78c4-4e35-bdc6-12418d25ca8f 2023-09-14T13:32:18+05:30 INF output produced command=blender-render outputFile="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000002.exr" task=d8d3a908-78c4-4e35-bdc6-12418d25ca8f 2023-09-14T13:32:18+05:30 INF output uploader: processing file before uploading to Manager image="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000002.exr" task=d8d3a908-78c4-4e35-bdc6-12418d25ca8f 2023-09-14T13:32:18+05:30 INF output uploader: file a format I cannot decode, ignoring it image="W:\\Software and Tutorials\\Software\\Blender\\Test Aditya\\Cube_Flamenco_Render\\Render\\Simple_Cube\\2023-09-14_133052\\000002.exr" ` Exact steps for others to reproduce the error As mentioned above, manager was on Windows, worker 2 was on same Windows machine, and worker 1 was on different windows machine but same network. Shared storage was on Server machine same network. Set render file format of blender file to MultiLayer OpenEXR Run manager, worker(s), and submit .blend file to Flamenco. If rendering itself is successful, this error will be raised while uploading render results to the manager. @dr.sybren

Simple_Cube.blend

988 KiB

Cube_Flamenco_Render.rar

71 MiB

Aditya-28 added the

labels 2023-09-14 10:18:58 +02:00