2011-02-21 07:25:24 +00:00
|
|
|
/*
|
2009-06-23 00:09:26 +00:00
|
|
|
* $Id$
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
*
|
|
|
|
|
* ***** BEGIN GPL/BL DUAL LICENSE BLOCK *****
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
|
* as published by the Free Software Foundation; either version 2
|
|
|
|
|
* of the License, or (at your option) any later version. The Blender
|
|
|
|
|
* Foundation also sells licenses for use in proprietary software under
|
|
|
|
|
* the Blender License. See http://www.blender.org/BL/ for information
|
|
|
|
|
* about this.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software Foundation,
|
2010-02-12 13:34:04 +00:00
|
|
|
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
*
|
|
|
|
|
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* The Original Code is: all of this file.
|
|
|
|
|
*
|
|
|
|
|
* Contributor(s): none yet.
|
|
|
|
|
*
|
|
|
|
|
* ***** END GPL/BL DUAL LICENSE BLOCK *****
|
|
|
|
|
*/
|
|
|
|
|
|
2011-02-21 07:25:24 +00:00
|
|
|
/** \file UI_resources.h
|
|
|
|
|
* \ingroup editorui
|
|
|
|
|
*/
|
|
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
#ifndef UI_RESOURCES_H
|
|
|
|
|
#define UI_RESOURCES_H
|
|
|
|
|
|
|
|
|
|
/* elubie: TODO: move the typedef for icons to UI_interface_icons.h */
|
|
|
|
|
/* and add/replace include of UI_resources.h by UI_interface_icons.h */
|
2010-11-02 13:12:30 +00:00
|
|
|
#define DEF_ICON(name) ICON_##name,
|
|
|
|
|
#define DEF_VICO(name) VICO_##name,
|
2.5 - Reworked the icon system a bit
* After several hours of manual dragging and typing the icon file is now
enlarged and completely reorganised logically, rather than scattered
throughout. This should provide a lot more room for growth, and is a
lot easier to work with (also allowing more space for toggle buttons
that require two icon slots next to each other). The icon grid has now
25 x 24 icons - hopefully this might last us for a couple more years :)
Some of the naming of icon defines is a bit ancient and can be cleaned
up a bit further. Other devs, if when bringing spaces back, it's
finding the wrong icon, or missing a define, try and look to see if
it's already existing in the new icon file, or drop me a note and I'll
fix it up.
Note: after these changes, older custom blender 2.4 icon
files won't work and will need to be updated to the new layout.
* Enlarged the icons themselves from 15x16 pixels to 16x16 pixels (icon
designer request). This is a more standard size, and is easier to fit
stuff in proportionally.
* Added a bunch more of jendrzych's icons that weren't added previously
since there wasn't space in the icon file (including a few more
modifier icons)
* Tweaked the outliner somewhat, so that instead of just showing a
generic 'object' icon for all objects, it shows 'object type' icons,
per object type. This makes the outliner a lot more useful for browsing
at a glance - a huge row of identical 'object' icons doesn't really
give much useful information. See here:
http://mke3.net/blender/devel/2.5/outliner_obtypes.png
2008-12-28 07:39:23 +00:00
|
|
|
|
|
|
|
|
typedef enum {
|
|
|
|
|
/* ui */
|
2009-06-15 20:28:49 +00:00
|
|
|
#include "UI_icons.h"
|
|
|
|
|
BIFICONID_LAST
|
2.5 - Reworked the icon system a bit
* After several hours of manual dragging and typing the icon file is now
enlarged and completely reorganised logically, rather than scattered
throughout. This should provide a lot more room for growth, and is a
lot easier to work with (also allowing more space for toggle buttons
that require two icon slots next to each other). The icon grid has now
25 x 24 icons - hopefully this might last us for a couple more years :)
Some of the naming of icon defines is a bit ancient and can be cleaned
up a bit further. Other devs, if when bringing spaces back, it's
finding the wrong icon, or missing a define, try and look to see if
it's already existing in the new icon file, or drop me a note and I'll
fix it up.
Note: after these changes, older custom blender 2.4 icon
files won't work and will need to be updated to the new layout.
* Enlarged the icons themselves from 15x16 pixels to 16x16 pixels (icon
designer request). This is a more standard size, and is easier to fit
stuff in proportionally.
* Added a bunch more of jendrzych's icons that weren't added previously
since there wasn't space in the icon file (including a few more
modifier icons)
* Tweaked the outliner somewhat, so that instead of just showing a
generic 'object' icon for all objects, it shows 'object type' icons,
per object type. This makes the outliner a lot more useful for browsing
at a glance - a huge row of identical 'object' icons doesn't really
give much useful information. See here:
http://mke3.net/blender/devel/2.5/outliner_obtypes.png
2008-12-28 07:39:23 +00:00
|
|
|
} BIFIconID;
|
2011-02-27 17:50:12 +00:00
|
|
|
|
|
|
|
|
#define BIFICONID_FIRST (ICON_NONE)
|
|
|
|
|
#define BIFNICONIDS (BIFICONID_LAST-BIFICONID_FIRST + 1)
|
|
|
|
|
|
2009-06-15 20:28:49 +00:00
|
|
|
#undef DEF_ICON
|
2010-11-02 13:12:30 +00:00
|
|
|
#undef DEF_VICO
|
2.5 - Reworked the icon system a bit
* After several hours of manual dragging and typing the icon file is now
enlarged and completely reorganised logically, rather than scattered
throughout. This should provide a lot more room for growth, and is a
lot easier to work with (also allowing more space for toggle buttons
that require two icon slots next to each other). The icon grid has now
25 x 24 icons - hopefully this might last us for a couple more years :)
Some of the naming of icon defines is a bit ancient and can be cleaned
up a bit further. Other devs, if when bringing spaces back, it's
finding the wrong icon, or missing a define, try and look to see if
it's already existing in the new icon file, or drop me a note and I'll
fix it up.
Note: after these changes, older custom blender 2.4 icon
files won't work and will need to be updated to the new layout.
* Enlarged the icons themselves from 15x16 pixels to 16x16 pixels (icon
designer request). This is a more standard size, and is easier to fit
stuff in proportionally.
* Added a bunch more of jendrzych's icons that weren't added previously
since there wasn't space in the icon file (including a few more
modifier icons)
* Tweaked the outliner somewhat, so that instead of just showing a
generic 'object' icon for all objects, it shows 'object type' icons,
per object type. This makes the outliner a lot more useful for browsing
at a glance - a huge row of identical 'object' icons doesn't really
give much useful information. See here:
http://mke3.net/blender/devel/2.5/outliner_obtypes.png
2008-12-28 07:39:23 +00:00
|
|
|
|
|
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
typedef enum {
|
|
|
|
|
#define BIFCOLORSHADE_FIRST (COLORSHADE_DARK)
|
2010-03-22 09:30:00 +00:00
|
|
|
COLORSHADE_DARK,
|
|
|
|
|
COLORSHADE_GREY,
|
|
|
|
|
COLORSHADE_MEDIUM,
|
|
|
|
|
COLORSHADE_HILITE,
|
|
|
|
|
COLORSHADE_LIGHT,
|
|
|
|
|
COLORSHADE_WHITE
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
#define BIFCOLORSHADE_LAST (COLORSHADE_WHITE)
|
|
|
|
|
#define BIFNCOLORSHADES (BIFCOLORSHADE_LAST-BIFCOLORSHADE_FIRST + 1)
|
|
|
|
|
} BIFColorShade;
|
|
|
|
|
|
|
|
|
|
typedef enum {
|
|
|
|
|
#define BIFCOLORID_FIRST (BUTGREY)
|
|
|
|
|
BUTGREY = 0,
|
|
|
|
|
BUTGREEN,
|
|
|
|
|
BUTBLUE,
|
|
|
|
|
BUTSALMON,
|
|
|
|
|
MIDGREY,
|
|
|
|
|
BUTPURPLE,
|
|
|
|
|
BUTYELLOW,
|
|
|
|
|
REDALERT,
|
|
|
|
|
BUTRUST,
|
|
|
|
|
BUTWHITE,
|
|
|
|
|
BUTDBLUE,
|
|
|
|
|
BUTPINK,
|
|
|
|
|
BUTDPINK,
|
|
|
|
|
BUTMACTIVE,
|
|
|
|
|
|
|
|
|
|
BUTIPO,
|
|
|
|
|
BUTAUDIO,
|
|
|
|
|
BUTCAMERA,
|
|
|
|
|
BUTRANDOM,
|
|
|
|
|
BUTEDITOBJECT,
|
|
|
|
|
BUTPROPERTY,
|
|
|
|
|
BUTSCENE,
|
|
|
|
|
BUTMOTION,
|
|
|
|
|
BUTMESSAGE,
|
|
|
|
|
BUTACTION,
|
|
|
|
|
BUTCD,
|
|
|
|
|
BUTGAME,
|
|
|
|
|
BUTVISIBILITY,
|
|
|
|
|
BUTYUCK,
|
|
|
|
|
BUTSEASICK,
|
|
|
|
|
BUTCHOKE,
|
|
|
|
|
BUTIMPERIAL,
|
|
|
|
|
|
|
|
|
|
BUTTEXTCOLOR,
|
|
|
|
|
BUTTEXTPRESSED,
|
|
|
|
|
BUTSBACKGROUND,
|
|
|
|
|
|
|
|
|
|
VIEWPORTBACKCOLOR,
|
|
|
|
|
VIEWPORTGRIDCOLOR,
|
|
|
|
|
VIEWPORTACTIVECOLOR,
|
|
|
|
|
VIEWPORTSELECTEDCOLOR,
|
|
|
|
|
VIEWPORTUNSELCOLOR,
|
|
|
|
|
|
|
|
|
|
EDITVERTSEL,
|
|
|
|
|
EDITVERTUNSEL,
|
|
|
|
|
EDITEDGESEL,
|
|
|
|
|
EDITEDGEUNSEL
|
|
|
|
|
|
|
|
|
|
#define BIFCOLORID_LAST (EDITEDGEUNSEL)
|
|
|
|
|
#define BIFNCOLORIDS (BIFCOLORID_LAST-BIFCOLORID_FIRST + 1)
|
|
|
|
|
|
|
|
|
|
} BIFColorID;
|
|
|
|
|
|
|
|
|
|
enum {
|
|
|
|
|
TH_REDALERT,
|
2.5
Summary of ain features:
- Themes and Styles are now editable.
- CTRL+U "Save user defaults" now goes to new .B25.blend, so you
can use 2.4x and 2.5x next to each other. If B25 doesn't exist, it
reads the regular .B.blend
- Press Tkey in 3d window for (unfinished) toolbar WIP. It now only
shows the last operator, if appropriate.
Nkey properties moved to the other side.
A lot of work was done on removing old themes for good and properly
getting it work with the 2.5 region system. Here's some notes;
- Buttons now all have a complete set of colors, based on button classifications
(See outliner -> user prefs -> Interface
- Theme colors have been extended with basic colors for region types.
Currently colors are defined for Window, Header, List/Channels and
for Button/Tool views.
The screen manager handles this btw, so a TH_BACK will always pick the
right backdrop color.
- Menu backdrops are in in Button theme colors. Floating Panels will be in
the per-space type Themes.
- Styles were added in RNA too, but only for the font settings now.
Only Panel font, widget font and widget-label work now. The 'group label'
will be for templates mostly.
Style settings will be expanded with spacing defaults, label conventions,
etc.
- Label text colors are stored in per-space Theme too, to make sure they fit.
Same goes for Panel title color.
Note that 'shadow' for fonts can conflict with text colors; shadow color is
currently stored in Style... shadow code needs a bit of work still.
2009-04-27 13:44:11 +00:00
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
TH_THEMEUI,
|
|
|
|
|
// common colors among spaces
|
|
|
|
|
|
|
|
|
|
TH_BACK,
|
|
|
|
|
TH_TEXT,
|
|
|
|
|
TH_TEXT_HI,
|
2.5
Summary of ain features:
- Themes and Styles are now editable.
- CTRL+U "Save user defaults" now goes to new .B25.blend, so you
can use 2.4x and 2.5x next to each other. If B25 doesn't exist, it
reads the regular .B.blend
- Press Tkey in 3d window for (unfinished) toolbar WIP. It now only
shows the last operator, if appropriate.
Nkey properties moved to the other side.
A lot of work was done on removing old themes for good and properly
getting it work with the 2.5 region system. Here's some notes;
- Buttons now all have a complete set of colors, based on button classifications
(See outliner -> user prefs -> Interface
- Theme colors have been extended with basic colors for region types.
Currently colors are defined for Window, Header, List/Channels and
for Button/Tool views.
The screen manager handles this btw, so a TH_BACK will always pick the
right backdrop color.
- Menu backdrops are in in Button theme colors. Floating Panels will be in
the per-space type Themes.
- Styles were added in RNA too, but only for the font settings now.
Only Panel font, widget font and widget-label work now. The 'group label'
will be for templates mostly.
Style settings will be expanded with spacing defaults, label conventions,
etc.
- Label text colors are stored in per-space Theme too, to make sure they fit.
Same goes for Panel title color.
Note that 'shadow' for fonts can conflict with text colors; shadow color is
currently stored in Style... shadow code needs a bit of work still.
2009-04-27 13:44:11 +00:00
|
|
|
TH_TITLE,
|
|
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
TH_HEADER,
|
|
|
|
|
TH_HEADERDESEL,
|
2.5
Summary of ain features:
- Themes and Styles are now editable.
- CTRL+U "Save user defaults" now goes to new .B25.blend, so you
can use 2.4x and 2.5x next to each other. If B25 doesn't exist, it
reads the regular .B.blend
- Press Tkey in 3d window for (unfinished) toolbar WIP. It now only
shows the last operator, if appropriate.
Nkey properties moved to the other side.
A lot of work was done on removing old themes for good and properly
getting it work with the 2.5 region system. Here's some notes;
- Buttons now all have a complete set of colors, based on button classifications
(See outliner -> user prefs -> Interface
- Theme colors have been extended with basic colors for region types.
Currently colors are defined for Window, Header, List/Channels and
for Button/Tool views.
The screen manager handles this btw, so a TH_BACK will always pick the
right backdrop color.
- Menu backdrops are in in Button theme colors. Floating Panels will be in
the per-space type Themes.
- Styles were added in RNA too, but only for the font settings now.
Only Panel font, widget font and widget-label work now. The 'group label'
will be for templates mostly.
Style settings will be expanded with spacing defaults, label conventions,
etc.
- Label text colors are stored in per-space Theme too, to make sure they fit.
Same goes for Panel title color.
Note that 'shadow' for fonts can conflict with text colors; shadow color is
currently stored in Style... shadow code needs a bit of work still.
2009-04-27 13:44:11 +00:00
|
|
|
TH_HEADER_TEXT,
|
|
|
|
|
TH_HEADER_TEXT_HI,
|
|
|
|
|
|
|
|
|
|
/* float panels */
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
TH_PANEL,
|
2.5
Summary of ain features:
- Themes and Styles are now editable.
- CTRL+U "Save user defaults" now goes to new .B25.blend, so you
can use 2.4x and 2.5x next to each other. If B25 doesn't exist, it
reads the regular .B.blend
- Press Tkey in 3d window for (unfinished) toolbar WIP. It now only
shows the last operator, if appropriate.
Nkey properties moved to the other side.
A lot of work was done on removing old themes for good and properly
getting it work with the 2.5 region system. Here's some notes;
- Buttons now all have a complete set of colors, based on button classifications
(See outliner -> user prefs -> Interface
- Theme colors have been extended with basic colors for region types.
Currently colors are defined for Window, Header, List/Channels and
for Button/Tool views.
The screen manager handles this btw, so a TH_BACK will always pick the
right backdrop color.
- Menu backdrops are in in Button theme colors. Floating Panels will be in
the per-space type Themes.
- Styles were added in RNA too, but only for the font settings now.
Only Panel font, widget font and widget-label work now. The 'group label'
will be for templates mostly.
Style settings will be expanded with spacing defaults, label conventions,
etc.
- Label text colors are stored in per-space Theme too, to make sure they fit.
Same goes for Panel title color.
Note that 'shadow' for fonts can conflict with text colors; shadow color is
currently stored in Style... shadow code needs a bit of work still.
2009-04-27 13:44:11 +00:00
|
|
|
TH_PANEL_TEXT,
|
|
|
|
|
TH_PANEL_TEXT_HI,
|
|
|
|
|
|
|
|
|
|
TH_BUTBACK,
|
|
|
|
|
TH_BUTBACK_TEXT,
|
|
|
|
|
TH_BUTBACK_TEXT_HI,
|
|
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
TH_SHADE1,
|
|
|
|
|
TH_SHADE2,
|
|
|
|
|
TH_HILITE,
|
|
|
|
|
|
|
|
|
|
TH_GRID,
|
|
|
|
|
TH_WIRE,
|
|
|
|
|
TH_SELECT,
|
|
|
|
|
TH_ACTIVE,
|
|
|
|
|
TH_GROUP,
|
|
|
|
|
TH_GROUP_ACTIVE,
|
|
|
|
|
TH_TRANSFORM,
|
|
|
|
|
TH_VERTEX,
|
|
|
|
|
TH_VERTEX_SELECT,
|
|
|
|
|
TH_VERTEX_SIZE,
|
2011-03-14 03:34:57 +00:00
|
|
|
TH_OUTLINE_WIDTH,
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
TH_EDGE,
|
|
|
|
|
TH_EDGE_SELECT,
|
|
|
|
|
TH_EDGE_SEAM,
|
|
|
|
|
TH_EDGE_FACESEL,
|
|
|
|
|
TH_FACE,
|
|
|
|
|
TH_FACE_SELECT,
|
|
|
|
|
TH_NORMAL,
|
2010-02-11 03:37:51 +00:00
|
|
|
TH_VNORMAL,
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
TH_FACE_DOT,
|
|
|
|
|
TH_FACEDOT_SIZE,
|
|
|
|
|
TH_CFRAME,
|
2010-03-12 16:43:04 +00:00
|
|
|
TH_NURB_ULINE,
|
|
|
|
|
TH_NURB_VLINE,
|
|
|
|
|
TH_NURB_SEL_ULINE,
|
|
|
|
|
TH_NURB_SEL_VLINE,
|
|
|
|
|
|
|
|
|
|
/* this eight colors should be in one block */
|
|
|
|
|
TH_HANDLE_FREE,
|
|
|
|
|
TH_HANDLE_AUTO,
|
|
|
|
|
TH_HANDLE_VECT,
|
|
|
|
|
TH_HANDLE_ALIGN,
|
|
|
|
|
TH_HANDLE_SEL_FREE,
|
|
|
|
|
TH_HANDLE_SEL_AUTO,
|
|
|
|
|
TH_HANDLE_SEL_VECT,
|
|
|
|
|
TH_HANDLE_SEL_ALIGN,
|
|
|
|
|
|
|
|
|
|
TH_ACTIVE_SPLINE,
|
2010-04-30 04:48:40 +00:00
|
|
|
TH_LASTSEL_POINT,
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
TH_SYNTAX_B,
|
|
|
|
|
TH_SYNTAX_V,
|
|
|
|
|
TH_SYNTAX_C,
|
|
|
|
|
TH_SYNTAX_L,
|
|
|
|
|
TH_SYNTAX_N,
|
|
|
|
|
|
|
|
|
|
TH_BONE_SOLID,
|
|
|
|
|
TH_BONE_POSE,
|
|
|
|
|
|
|
|
|
|
TH_STRIP,
|
|
|
|
|
TH_STRIP_SELECT,
|
|
|
|
|
|
|
|
|
|
TH_LAMP,
|
|
|
|
|
|
|
|
|
|
TH_NODE,
|
|
|
|
|
TH_NODE_IN_OUT,
|
|
|
|
|
TH_NODE_OPERATOR,
|
|
|
|
|
TH_NODE_CONVERTOR,
|
|
|
|
|
TH_NODE_GROUP,
|
|
|
|
|
|
2010-01-15 17:00:37 +00:00
|
|
|
TH_CONSOLE_OUTPUT,
|
|
|
|
|
TH_CONSOLE_INPUT,
|
|
|
|
|
TH_CONSOLE_INFO,
|
|
|
|
|
TH_CONSOLE_ERROR,
|
2010-02-15 02:39:40 +00:00
|
|
|
TH_CONSOLE_CURSOR,
|
2010-01-15 17:00:37 +00:00
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
TH_SEQ_MOVIE,
|
|
|
|
|
TH_SEQ_IMAGE,
|
|
|
|
|
TH_SEQ_SCENE,
|
|
|
|
|
TH_SEQ_AUDIO,
|
|
|
|
|
TH_SEQ_EFFECT,
|
|
|
|
|
TH_SEQ_PLUGIN,
|
|
|
|
|
TH_SEQ_TRANSITION,
|
|
|
|
|
TH_SEQ_META,
|
|
|
|
|
|
|
|
|
|
TH_EDGE_SHARP,
|
|
|
|
|
TH_EDITMESH_ACTIVE,
|
2008-12-22 08:13:25 +00:00
|
|
|
|
|
|
|
|
TH_HANDLE_VERTEX,
|
|
|
|
|
TH_HANDLE_VERTEX_SELECT,
|
|
|
|
|
TH_HANDLE_VERTEX_SIZE,
|
|
|
|
|
|
|
|
|
|
TH_DOPESHEET_CHANNELOB,
|
|
|
|
|
TH_DOPESHEET_CHANNELSUBOB,
|
2010-01-19 01:32:06 +00:00
|
|
|
|
|
|
|
|
TH_PREVIEW_BACK,
|
2010-04-06 02:36:37 +00:00
|
|
|
|
|
|
|
|
TH_EDGE_CREASE,
|
2010-12-20 03:59:22 +00:00
|
|
|
|
|
|
|
|
TH_DRAWEXTRA_EDGELEN,
|
|
|
|
|
TH_DRAWEXTRA_FACEAREA,
|
|
|
|
|
TH_DRAWEXTRA_FACEANG
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
};
|
|
|
|
|
/* XXX WARNING: previous is saved in file, so do not change order! */
|
|
|
|
|
|
|
|
|
|
/* specific defines per space should have higher define values */
|
|
|
|
|
|
|
|
|
|
struct bTheme;
|
2009-02-04 11:52:16 +00:00
|
|
|
struct PointerRNA;
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
// THE CODERS API FOR THEMES:
|
|
|
|
|
|
|
|
|
|
// sets the color
|
|
|
|
|
void UI_ThemeColor(int colorid);
|
|
|
|
|
|
|
|
|
|
// sets the color plus alpha
|
|
|
|
|
void UI_ThemeColor4(int colorid);
|
|
|
|
|
|
|
|
|
|
// sets color plus offset for shade
|
|
|
|
|
void UI_ThemeColorShade(int colorid, int offset);
|
|
|
|
|
|
|
|
|
|
// sets color plus offset for alpha
|
|
|
|
|
void UI_ThemeColorShadeAlpha(int colorid, int coloffset, int alphaoffset);
|
|
|
|
|
|
|
|
|
|
// sets color, which is blend between two theme colors
|
|
|
|
|
void UI_ThemeColorBlend(int colorid1, int colorid2, float fac);
|
|
|
|
|
// same, with shade offset
|
|
|
|
|
void UI_ThemeColorBlendShade(int colorid1, int colorid2, float fac, int offset);
|
2009-01-04 07:50:41 +00:00
|
|
|
void UI_ThemeColorBlendShadeAlpha(int colorid1, int colorid2, float fac, int offset, int alphaoffset);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
// returns one value, not scaled
|
|
|
|
|
float UI_GetThemeValuef(int colorid);
|
|
|
|
|
int UI_GetThemeValue(int colorid);
|
|
|
|
|
|
|
|
|
|
// get three color values, scaled to 0.0-1.0 range
|
|
|
|
|
void UI_GetThemeColor3fv(int colorid, float *col);
|
2010-01-08 11:14:30 +00:00
|
|
|
// get the color, range 0.0-1.0, complete with shading offset
|
|
|
|
|
void UI_GetThemeColorShade3fv(int colorid, int offset, float *col);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
// get the 3 or 4 byte values
|
2010-12-20 03:59:22 +00:00
|
|
|
void UI_GetThemeColor3ubv(int colorid, unsigned char col[3]);
|
|
|
|
|
void UI_GetThemeColor4ubv(int colorid, unsigned char col[4]);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
// get a theme color from specified space type
|
2010-12-20 03:59:22 +00:00
|
|
|
void UI_GetThemeColorType4ubv(int colorid, int spacetype, char col[4]);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
// blends and shades between two color pointers
|
2010-12-20 03:59:22 +00:00
|
|
|
void UI_ColorPtrBlendShade3ubv(const unsigned char cp1[3], const unsigned char cp2[3], float fac, int offset);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
// get a 3 byte color, blended and shaded between two other char color pointers
|
2010-12-20 03:59:22 +00:00
|
|
|
void UI_GetColorPtrBlendShade3ubv(const unsigned char cp1[3], const unsigned char cp2[3], unsigned char col[3], float fac, int offset);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2010-04-06 07:02:16 +00:00
|
|
|
// clear the openGL ClearColor using the input colorid
|
|
|
|
|
void UI_ThemeClearColor(int colorid);
|
|
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
// internal (blender) usage only, for init and set active
|
2.5
Summary of ain features:
- Themes and Styles are now editable.
- CTRL+U "Save user defaults" now goes to new .B25.blend, so you
can use 2.4x and 2.5x next to each other. If B25 doesn't exist, it
reads the regular .B.blend
- Press Tkey in 3d window for (unfinished) toolbar WIP. It now only
shows the last operator, if appropriate.
Nkey properties moved to the other side.
A lot of work was done on removing old themes for good and properly
getting it work with the 2.5 region system. Here's some notes;
- Buttons now all have a complete set of colors, based on button classifications
(See outliner -> user prefs -> Interface
- Theme colors have been extended with basic colors for region types.
Currently colors are defined for Window, Header, List/Channels and
for Button/Tool views.
The screen manager handles this btw, so a TH_BACK will always pick the
right backdrop color.
- Menu backdrops are in in Button theme colors. Floating Panels will be in
the per-space type Themes.
- Styles were added in RNA too, but only for the font settings now.
Only Panel font, widget font and widget-label work now. The 'group label'
will be for templates mostly.
Style settings will be expanded with spacing defaults, label conventions,
etc.
- Label text colors are stored in per-space Theme too, to make sure they fit.
Same goes for Panel title color.
Note that 'shadow' for fonts can conflict with text colors; shadow color is
currently stored in Style... shadow code needs a bit of work still.
2009-04-27 13:44:11 +00:00
|
|
|
void UI_SetTheme(int spacetype, int regionid);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
|
|
|
|
/* only for buttons in theme editor! */
|
2010-12-20 03:59:22 +00:00
|
|
|
const unsigned char *UI_ThemeGetColorPtr(struct bTheme *btheme, int spacetype, int colorid);
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
|
2010-12-20 03:59:22 +00:00
|
|
|
void UI_make_axis_color(const unsigned char *src_col, unsigned char *dst_col, const char axis);
|
2009-04-30 11:47:35 +00:00
|
|
|
|
Port of part of the Interface code to 2.50.
This is based on the current trunk version, so these files should not need
merges. There's two things (clipboard and intptr_t) that are missing in 2.50
and commented out with XXX 2.48, these can be enabled again once trunk is
merged into this branch.
Further this is not all interface code, there are many parts commented out:
* interface.c: nearly all button types, missing: links, chartab, keyevent.
* interface_draw.c: almost all code, with some small exceptions.
* interface_ops.c: this replaces ui_do_but and uiDoBlocks with two operators,
making it non-blocking.
* interface_regions: this is a part of interface.c, split off, contains code to
create regions for tooltips, menus, pupmenu (that one is crashing currently),
color chooser, basically regions with buttons which is fairly independent of
core interface code.
* interface_panel.c and interface_icons.c: not ported over, so no panels and
icons yet. Panels should probably become (free floating) regions?
* text.c: (formerly language.c) for drawing text and translation. this works
but is using bad globals still and could be cleaned up.
Header Files:
* ED_datafiles.h now has declarations for datatoc_ files, so those extern
declarations can be #included instead of repeated.
* The user interface code is in UI_interface.h and other UI_* files.
Core:
* The API for creating blocks, buttons, etc is nearly the same still. Blocks
are now created per region instead of per area.
* The code was made non-blocking, which means that any changes and redraws
should be possible while editing a button. That means though that we need
some sort of persistence even though the blender model is to recreate buttons
for each redraw. So when a new block is created, some matching happens to
find out which buttons correspond to buttons in the previously created block,
and for activated buttons some data is then copied over to the new button.
* Added UI_init/UI_init_userdef/UI_exit functions that should initialize code
in this module, instead of multiple function calls in the windowmanager.
* Removed most static/globals from interface.c.
* Removed UIafterfunc_ I don't think it's needed anymore, and not sure how it
would integrate here?
* Currently only full window redraws are used, this should become per region
and maybe per button later.
Operators:
* Events are currently handled through two operators: button activate and menu
handle. Operators may not be the best way to implement this, since there are
currently some issues with events being missed, but they can become a special
handler type instead, this should not be a big change.
* The button activate operator runs as long as a button is active, and will
handle all interaction with that button until the button is not activated
anymore. This means clicking, text editing, number dragging, opening menu
blocks, etc.
* Since this operator has to be non-blocking, the ui_do_but code needed to made
non-blocking. That means variables that were previously on the stack, now
need to be stored away in a struct such that they can be accessed again when
the operator receives more events.
* Additionally the place in the ui_do_but code indicated the state, now that
needs to be set explicit in order to handle the right events in the right
state. So an activated button can be in one of these states: init, highlight,
wait_flash, wait_release, wait_key_event, num_editing, text_editing,
text_selecting, block_open, exit.
* For each button type an ui_apply_but_* function has also been separated out
from ui_do_but. This makes it possible to continuously apply the button as
text is being typed for example, and there is an option in the code to enable
this. Since the code non-blocking and can deal with the button being deleted
even, it should be safe to do this.
* When editing text, dragging numbers, etc, the actual data (but->poin) is not
being edited, since that would mean data is being edited without correct
updates happening, while some other part of blender may be accessing that
data in the meantime. So data values, strings, vectors are written to a
temporary location and only flush in the apply function.
Regions:
* Menus, color chooser, tooltips etc all create screen level regions. Such menu
blocks give a handle to the button that creates it, which will contain the
results of the menu block once a MESSAGE event is received from that menu
block.
* For this type of menu block the coordinates used to be in window space. They
are still created that way and ui_positionblock still works with window
coordinates, but after that the block and buttons are brought back to region
coordinates since these are now contained in a region.
* The flush/overdraw frontbuffer drawing code was removed, the windowmanager
should have enough information with these screen level regions to have full
control over what gets drawn when and to then do correct compositing.
Testing:
* The header in the time space currently has some buttons to test the UI code.
2008-11-11 18:31:32 +00:00
|
|
|
#endif /* UI_ICONS_H */
|
