archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
2f7279a413bfb17a63153fb812163dba3cc8ab3d
blender-archive/source/blender/editors/space_node/node_ops.c

213 lines
8.1 KiB
C
Raw Normal View History

doxygen: prevent GPL license block from being parsed as doxygen comment.
2011-02-23 10:52:22 +00:00
/*
2.5 / Nodes * WIP selection operator. - selection is made, but redraw is still missing.
2008-12-28 00:08:34 +00:00
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
Cleanup: trailing whitespace (comment blocks) Strip unindented comment blocks - mainly headers to avoid conflicts.
2018-06-01 18:19:39 +02:00
* of the License, or (at your option) any later version.
2.5 / Nodes * WIP selection operator. - selection is made, but redraw is still missing.
2008-12-28 00:08:34 +00:00
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
correct fsf address
2010-02-12 13:34:04 +00:00
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
2.5 / Nodes * WIP selection operator. - selection is made, but redraw is still missing.
2008-12-28 00:08:34 +00:00
*
* The Original Code is Copyright (C) 2008 Blender Foundation.
* All rights reserved.
*
Cleanup: trailing whitespace (comment blocks) Strip unindented comment blocks - mainly headers to avoid conflicts.
2018-06-01 18:19:39 +02:00
*
2.5 / Nodes * WIP selection operator. - selection is made, but redraw is still missing.
2008-12-28 00:08:34 +00:00
* Contributor(s): Blender Foundation, Nathan Letwory
*
* ***** END GPL LICENSE BLOCK *****
*/
doxygen: blender/editors tagged.
2011-02-27 20:29:51 +00:00
/** \file blender/editors/space_node/node_ops.c
* \ingroup spnode
*/
2.5 / Nodes * WIP selection operator. - selection is made, but redraw is still missing.
2008-12-28 00:08:34 +00:00
#include "DNA_node_types.h"
Fix [#29894] Selection in sequence editor does not de-select other strips Another bunch of fixes for select keymaps (sequencer, node, nla, graph, action).
2012-01-14 22:59:51 +00:00
#include "BLI_utildefines.h"
code cleanup: include order
2013-04-05 17:56:54 +00:00
#include "BKE_context.h"
code cleanup: remove unused includes
2012-08-02 23:03:16 +00:00
#include "ED_node.h" /* own include */
2.5 / Nodes * WIP selection operator. - selection is made, but redraw is still missing.
2008-12-28 00:08:34 +00:00
#include "ED_screen.h"
3D View boarder/lasso select tool options Add tool options to control how select operates (add/sub/set/and/xor). Note: edit mode armature select still needs to support all options, this is complicated by how it handles partial end-point selection.
2018-08-14 10:28:41 +10:00
#include "ED_select_utils.h"
2.5: code consistency * Rename BIF_transform/retopo.h to ED_transform/retopo.h for consistency. * Move MESH_OT_duplicate_add to editmesh_add.c. * Remove some code from BIF_gl.h which is not needed there anymore.
2009-07-08 16:17:47 +00:00
#include "ED_transform.h"
2.5 / Nodes * add Context accessor for selected nodes * node translation uses transform code * put transform defines in an enum (mode and numinput flags)
2009-01-02 23:58:03 +00:00
2.5 / Nodes * WIP selection operator. - selection is made, but redraw is still missing.
2008-12-28 00:08:34 +00:00
#include "RNA_access.h"
#include "WM_api.h"
#include "WM_types.h"
code cleanup: remove unused includes
2012-08-02 23:03:16 +00:00
#include "node_intern.h" /* own include */
2.5 / Nodes * WIP selection operator. - selection is made, but redraw is still missing.
2008-12-28 00:08:34 +00:00
void node_operatortypes(void)
{
Grease Pencil for Nodes Editor: This commit restores Grease Pencil functionality for the Nodes Editor. Grease Pencil data is now stored at the NodeTree level, which means that annotations remain with the NodeTree they were made for. Possible TODO's: * In future, it may be worth investigating attaching Grease Pencil data to individual nodes, to allow annotations to stay attached to nodes as they are moved * Include the settings for the 'active node' in a panel in the new NKEY region where the Grease Pencil buttons appear.
2009-11-11 08:12:54 +00:00
WM_operatortype_append(NODE_OT_properties);
Toolbar region for the node editor. This region is, for now, empty and hidden by default. Later on we might add standard panels here, but at least it will give addons a place to register tool shelf panels.
2012-12-12 12:50:39 +00:00
WM_operatortype_append(NODE_OT_toolbar);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
2.5 / Nodes * WIP selection operator. - selection is made, but redraw is still missing.
2008-12-28 00:08:34 +00:00
WM_operatortype_append(NODE_OT_select);
Three node selection operators added, patch by Michał Ziułek, thanks! * Select all * Select linked to * Select linked from
2009-09-14 08:47:13 +00:00
WM_operatortype_append(NODE_OT_select_all);
WM_operatortype_append(NODE_OT_select_linked_to);
WM_operatortype_append(NODE_OT_select_linked_from);
UI: rename Border Select -> Box Select See: T56648
2018-10-05 10:27:04 +10:00
WM_operatortype_append(NODE_OT_select_box);
Patch #37274: Circle select for node editor, by Henrik Aarnio (hjaarnio). Circle select was missing from node editor, and C key was assigned to now defunct "show cyclic dependencies". This patch remaps the key and adds circle select operator. Functions to check intersection between rctf/rcti and a circle were also added to rct.c for code cleanliness and consistency.
2013-11-06 19:21:42 +00:00
WM_operatortype_append(NODE_OT_select_circle);
lasso select works in the node editor again, Ctrl+Alt+LMB, Ctrl+Alt+Shif+LMB to deselect
2012-08-22 13:34:06 +00:00
WM_operatortype_append(NODE_OT_select_lasso);
Refactor of Node's 'Select by type' op, to also handle color and name handling. Ne op is similar to other 'Select Grouped' ones in Blender. Based on patch D288 by Cruentus_Nex (Steve). Reviewed by Campbell Barton, thanks! Revision: D288.
2014-07-04 14:17:54 +02:00
WM_operatortype_append(NODE_OT_select_grouped);
Node Editor To complete previous commit: New "Activate same type next/prev" operator - replaces the two not working previous ones. This selects/activates and views the next or previous node of same type. Shortcuts: Shift ] and Shift [
2013-03-27 18:28:25 +00:00
WM_operatortype_append(NODE_OT_select_same_type_step);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
Node editing feature: New operator "Find Node". Opens search menu, and allows to find a node based on name or label. On selecting name, menu selects/activates the node and moves the view to it. Shortcut: ALT+F Menu: Node editor, "Select"
2013-04-01 15:07:22 +00:00
WM_operatortype_append(NODE_OT_find_node);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
More Node Editor Fixups: * Restored Mute and Hide Operators, M and H keys respectively * Restored Make Links Operator (F). However, I can't figure out how to set the sockets so that this can be used * Made Alt-RMB the new hotkey for breaking links by dragging, since Alt-LMB was taken for panning already
2009-11-20 06:31:49 +00:00
WM_operatortype_append(NODE_OT_view_all);
add view selected for node view
2012-08-07 16:30:34 +00:00
WM_operatortype_append(NODE_OT_view_selected);
Fix for toggle buttons in node headers. The buttons for "hiding" (collapsing) a node, hiding unlinked sockets, additional options, the preview and for opening a node group were all using a custom mouse test function, which was broken. They now use actual buttons instead of just displaying icons. Before executing the respective operators the button's node has to be selected and activated, so the buttons use an intermediate handle function, which selects the node and then calls the operator.
2011-12-18 12:51:50 +00:00
node toggle preview and hidden socket key shortcuts (Ctrl+H, Shift+H)
2010-06-07 20:03:40 +00:00
WM_operatortype_append(NODE_OT_mute_toggle);
WM_operatortype_append(NODE_OT_hide_toggle);
WM_operatortype_append(NODE_OT_preview_toggle);
Fix for toggle buttons in node headers. The buttons for "hiding" (collapsing) a node, hiding unlinked sockets, additional options, the preview and for opening a node group were all using a custom mouse test function, which was broken. They now use actual buttons instead of just displaying icons. Before executing the respective operators the button's node has to be selected and activated, so the buttons use an intermediate handle function, which selects the node and then calls the operator.
2011-12-18 12:51:50 +00:00
WM_operatortype_append(NODE_OT_options_toggle);
node toggle preview and hidden socket key shortcuts (Ctrl+H, Shift+H)
2010-06-07 20:03:40 +00:00
WM_operatortype_append(NODE_OT_hide_socket_toggle);
A number of new features for the node editor in general and the Frame node in particular. For an detailed user-level description of new features see the following blogpost: http://code.blender.org/index.php/2012/05/node-editing-tweaks/ TL;DR: * Frame node gets more usable bounding-box behavior * Node resizing has helpful mouse cursor indicators and works on all borders * Node selection/active colors are themeable independently * Customizable background colors for nodes (useful for frames visual distinction).
2012-05-22 14:13:33 +00:00
WM_operatortype_append(NODE_OT_node_copy_color);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
More Node Editor Fixups: * Restored Mute and Hide Operators, M and H keys respectively * Restored Make Links Operator (F). However, I can't figure out how to set the sockets so that this can be used * Made Alt-RMB the new hotkey for breaking links by dragging, since Alt-LMB was taken for panning already
2009-11-20 06:31:49 +00:00
WM_operatortype_append(NODE_OT_duplicate);
- use clear, set, add, enable, disable and toggle as a prefix in operator names - use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop - Each select all operator was using slightly different wording... select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle - selection -> select - POSE_OT_select_connected -> POSE_OT_select_linked to match other operators - NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators - ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators - NODE_OT_fit_all -> NODE_OT_view_all to match other operators - View2D_OT_* -> VIEW2D_OT_* to match VIEW3D - View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical - removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect - MARKER_OT_mouseselect -> MARKER_OT_select - GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups - MESH_OT_removedoublesflag -> MESH_OT_remove_doubles - redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete renamed selection operator properties extend_select -> extend column_select -> column select_children_only -> children_only ... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name. Updated docs http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
2009-03-29 02:15:13 +00:00
WM_operatortype_append(NODE_OT_delete);
Add delete with reconnect feature. this will reconnect nodes as if the deleted node is muted. Operation is added to the space_node node menu and to the keymap as CTRL-X to test this just add some nodes to the space_node select one or multiple nodes and press CTRL-X It should reconnect the nodes as they were muted limitations: 1. it performs a delete and reconnect per node. It does not evaluate all selected nodes as one whole 2. mute only supports Value, Vector and Color data types, so does this feature 3. not usable for nodes where input and output does not match (like colorToBW) Where reconnect could not be preformed the links will be removed from the model. Undo works with this delete with reconnect.
2011-07-12 18:59:54 +00:00
WM_operatortype_append(NODE_OT_delete_reconnect);
2.5: Operator naming, reviewed some of the recent changes by Shaul, did some minor tweaks.
2009-04-15 15:40:31 +00:00
WM_operatortype_append(NODE_OT_resize);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
More Node Editor Fixups: * Restored Mute and Hide Operators, M and H keys respectively * Restored Make Links Operator (F). However, I can't figure out how to set the sockets so that this can be used * Made Alt-RMB the new hotkey for breaking links by dragging, since Alt-LMB was taken for panning already
2009-11-20 06:31:49 +00:00
WM_operatortype_append(NODE_OT_link);
WM_operatortype_append(NODE_OT_link_make);
2.5 - Node editor: link cut back, now under ALT+LMB, to prevent accidents. Note it now nicely intersects the real curved noodles with a line you draw! - To make above work, replaced ogl curve draw with own bezier code. - Added new WM standard operator callback for lines-gesture, the Lasso gesture now draws a closed line. - Both callbacks have optional property 'cursor' to make it give modal info. For future also linestyle or color can be defined. - Changed 'pin' icon in Image header to something that looks less scary... but there's no pin icon yet?
2009-02-07 14:03:34 +00:00
WM_operatortype_append(NODE_OT_links_cut);
Implements a new operator for detaching nodes. In the process i overhauled the node muting system as well. There are a number of features that use a kind of "internal linking" in nodes: 1. muting 2. delete + reconnect (restore link to/from node after delete) 3. the new detach operator (same as 2, but don't delete the node) The desired behavior in all cases is the same: find a sensible mapping of inputs-to-outputs of a node. In the case of muting these links are displayed in red on the node itself. For the other operators they are used to relink connections, such that one gets the best possible ongoing link between previous up- and downstream nodes. Muting previously used a complicated callback system to ensure consistent behavior in the editor as well as execution in compositor, shader cpu/gpu and texture nodes. This has been greatly simplified by moving the muting step into the node tree localization functions. Any muted node is now bypassed using the generalized nodeInternalRelink function and then removed from the local tree. This way the internal execution system doesn't have to deal with muted nodes at all, as if they are non-existent. The same function is also used by the delete_reconnect and the new links_detach operators (which work directly in the editor node tree). Detaching nodes is currently keymapped as a translation variant (macro operator): pressing ALTKEY + moving node first detaches and then continues with regular transform operator. The default key is ALT+DKEY though, instead ALT+GKEY, since the latter is already used for the ungroup operator.
2012-02-27 17:38:16 +00:00
WM_operatortype_append(NODE_OT_links_detach);
Reroute nodes, by Jeroen Bakker (patch #28443). By holding shift and "cutting" a node link a new reroute helper node can be inserted. This consists of a single socket that can be used to insert additional connection points into a link. This can be used to keep a connection point in the tree when deleting a node, or to control the path of long connections for layout cleanup.
2012-06-01 12:38:03 +00:00
WM_operatortype_append(NODE_OT_add_reroute);
Add delete with reconnect feature. this will reconnect nodes as if the deleted node is muted. Operation is added to the space_node node menu and to the keymap as CTRL-X to test this just add some nodes to the space_node select one or multiple nodes and press CTRL-X It should reconnect the nodes as they were muted limitations: 1. it performs a delete and reconnect per node. It does not evaluate all selected nodes as one whole 2. mute only supports Value, Vector and Color data types, so does this feature 3. not usable for nodes where input and output does not match (like colorToBW) Where reconnect could not be preformed the links will be removed from the model. Undo works with this delete with reconnect.
2011-07-12 18:59:54 +00:00
2.5: node group/ungroup/edit operators, patch by Michal Ziulek, with some small changes.
2009-09-15 11:35:10 +00:00
WM_operatortype_append(NODE_OT_group_make);
Merge of the PyNodes branch (aka "custom nodes") into trunk. PyNodes opens up the node system in Blender to scripters and adds a number of UI-level improvements. === Dynamic node type registration === Node types can now be added at runtime, using the RNA registration mechanism from python. This enables addons such as render engines to create a complete user interface with nodes. Examples of how such nodes can be defined can be found in my personal wiki docs atm [1] and as a script template in release/scripts/templates_py/custom_nodes.py [2]. === Node group improvements === Each node editor now has a tree history of edited node groups, which allows opening and editing nested node groups. The node editor also supports pinning now, so that different spaces can be used to edit different node groups simultaneously. For more ramblings and rationale see (really old) blog post on code.blender.org [3]. The interface of node groups has been overhauled. Sockets of a node group are no longer displayed in columns on either side, but instead special input/output nodes are used to mirror group sockets inside a node tree. This solves the problem of long node lines in groups and allows more adaptable node layout. Internal sockets can be exposed from a group by either connecting to the extension sockets in input/output nodes (shown as empty circle) or by adding sockets from the node property bar in the "Interface" panel. Further details such as the socket name can also be changed there. [1] http://wiki.blender.org/index.php/User:Phonybone/Python_Nodes [2] http://projects.blender.org/scm/viewvc.php/trunk/blender/release/scripts/templates_py/custom_nodes.py?view=markup&root=bf-blender [3] http://code.blender.org/index.php/2012/01/improving-node-group-interface-editing/
2013-03-18 16:34:57 +00:00
WM_operatortype_append(NODE_OT_group_insert);
2.5: node group/ungroup/edit operators, patch by Michal Ziulek, with some small changes.
2009-09-15 11:35:10 +00:00
WM_operatortype_append(NODE_OT_group_ungroup);
Modification of node groups by adding/removing nodes is not possible yet. This patch extends the 'Make Group' operator and adds a new 'Separate' operator to add such functionality. 1) For inserting into existing groups: The 'Make Group from selected' (CTRL+g) operator shows a selection popup (like the object parenting operator), with options depending on the type of the active node (last selected): * "New" -> regular operator, creates new group type with all selected nodes inside. * "Insert" (only if active node is a group) -> adds all other selected nodes into the group. Currently still prohibits groups inside groups in general, though would be technically possible as long as no actual recursion occurs (group containing itself). 2) For extracting from an existing group: New 'Separate from group' operator (p), works similar to separating vertices/edges/faces from mesh. Two modes: * "Copy" makes a copy of the nodes in the parent tree, but keeps the original group intact. * "Move" removes selected nodes from the node group and adds them to the parent tree
2012-06-12 08:44:46 +00:00
WM_operatortype_append(NODE_OT_group_separate);
2.5: node group/ungroup/edit operators, patch by Michal Ziulek, with some small changes.
2009-09-15 11:35:10 +00:00
WM_operatortype_append(NODE_OT_group_edit);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
Request: auto link to viewer node back. Used to be ctrl+click, is now shift+ctrl+click, because the ctrl_click goes to knife cutting. Implementation note: this is a macro, select + link.
2010-04-05 18:34:18 +00:00
WM_operatortype_append(NODE_OT_link_viewer);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
Note Editor: Auto-offset nodes on insertion Implements "Auto-offset" (called "insert offset" in code) feature for Node Editor, developed during and after LSOC :) Idea and sponsoring by Sebastian König, blendFX, Mathias Eimann, Mikavaa, Knick Design When you drop a node with at least one input and one output socket onto a an existing connection between two nodes, Auto-offset will, depending on the direction setting, automatically and animated move the left or right and all of its following nodes away to make room for the new node. The direction for offsetting can be toggled while you are moving the node by pressing „T“. The auto-offset is enabled by default but can be disabled in the header of the node-editor. The offset margin can be changed in the editing section of the User Preferences. Thanks a lot to the sponsors, and especially to Sebastian who helped *a lot* with this. That's how users can help developing Blender!
2015-08-01 17:39:48 +02:00
WM_operatortype_append(NODE_OT_insert_offset);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
Rename any instance of scene layer or render layer in code with view layer The RenderResult struct still has a listbase of RenderLayer, but that's ok since this is strictly for rendering. * Subversion bump (to 2.80.2) * DNA low level doversion (renames) - only for .blend created since 2.80 started Note: We can't use DNA_struct_elem_find or get file version in init_structDNA, so we are manually iterating over the array of the SDNA elements instead. Note 2: This doversion change with renames can be reverted in a few months. But so far it's required for 2.8 files created between October 2016 and now. Reviewers: campbellbarton, sergey Differential Revision: https://developer.blender.org/D2927
2017-11-22 10:52:39 -02:00
WM_operatortype_append(NODE_OT_read_viewlayers);
Todo/feature request When using masks or other simple 3D elements in composites, doing a layer re-rendering on a node is a bit clumsy all the time. This commit does two things to help: - new hotkey "Z" in node editor automatically finds render layer that changed and re-renders it + composites - option "Auto Render" does same, but then after every transform edit in 3D window The latter is experimental; real & proper system for this requires full threaded render support (like previews). But it works! Demo file: http://download.blender.org/demo/test/auto_composite.blend Important fix: After any render, all the render layers were tagged "changed", which caused any edit to first totally recomposte everthing. Now it only composites changes. Implementation notes - DAG scene flush now sets 'changed' flags in render layer nodes - Added notifier for 'transform finished' to trigger the update, this is temporarily.
2011-02-07 16:41:57 +00:00
WM_operatortype_append(NODE_OT_render_changed);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
The daily node commit: brought back panning background image. For now it is on ALT+MiddleMouse. The view2d code eats the shift+mmb, which is not necessary, but will have to ask Joshua to be sure. Probably tomorrow it's shift+mmb as for 2.49.
2010-04-07 17:06:22 +00:00
WM_operatortype_append(NODE_OT_backimage_move);
three things: - ALT+Scrollwheel zooms backdrop in node editor - Blender -d debug print will also print every event except mouse moves (needed to debug WM, some events are catched by OS) - Changed order of keymaps... the default maps now are evaluated *after* the own custom maps, so you can make overrides or defaults.
2010-04-08 16:36:50 +00:00
WM_operatortype_append(NODE_OT_backimage_zoom);
Patch #36622, by Henrik Aarnio: Fit backdrop image to the area dimensions. A new operator to alter the backdrop zoom level so that it fits fully within the node editor area, and centers the image. Shortcut alt-home, as home is used for fitting stuff into the view everywhere.
2013-09-01 09:50:56 +00:00
WM_operatortype_append(NODE_OT_backimage_fit);
Added backdrop image color information to the node editor. When clicking on empty space in the node editor, the pixel color values will be displayed on the bottom like in image editor.
2011-01-31 14:42:55 +00:00
WM_operatortype_append(NODE_OT_backimage_sample);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
Another one for drag and drop: Allow dropping image files from outside blender, or image datablocks from inside blender to the compositing node editor, to add an image node. Also small tweak: Only set 'path' properties on drops, if the drag->path isn't empty.
2010-05-12 04:25:33 +00:00
WM_operatortype_append(NODE_OT_add_file);
Allow creation of mask nodes in compositor with drag&drop of mask datablocks Also remove superfluous "deselect all" operation in drag&drop for images
2013-07-22 19:24:39 +00:00
WM_operatortype_append(NODE_OT_add_mask);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
Merged the particles-2010 branch with node improvements into trunk. This branch adds mostly organizational improvements to the node system by renaming the node folders and files. A couple of internal features have been added too. Detailed information can be found on the wiki page: http://wiki.blender.org/index.php/User:Phonybone/Particles2010
2011-09-05 21:01:50 +00:00
WM_operatortype_append(NODE_OT_new_node_tree);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
A number of improvements for the file output node(s). 1) Old CMP_NODE_OUTPUT_FILE and CMP_NODE_OUTPUT_MULTI_FILE have been merged, only CMP_NODE_OUTPUT_FILE remains. All functions renamed accordingly. 2) do_versions code for converting single-file output nodes into multi-file output nodes. If a Z buffer input is used, the node is made into a multilayer exr with two inputs. (see below). Also re-identifies multi-file output nodes with the CMP_NODE_OUTPUT_FILE type. 3) "Global" format is stored in node now. By default this overrides any per-socket settings. 4) Multilayer EXR output implemented. When M.EXR format is selected for node format, all socket format details are ignored. Socket names are used for layer names. 5) Input buffer types are used as-is when possible, i.e. stored as B/W, RGB or RGBA. In regular file output the format dictates the number of actual channels, so the CompBuf is typechecked to the right type first. For multilayer EXR the number of channels is more flexible, so an input buffer will store only the channels it actually uses. 6) The editor socket type is updated from linked sockets as an indicator of the actual data written to files. This may not be totally accurate for regular file output though, due to restrictions of format setting.
2012-03-01 07:56:15 +00:00
WM_operatortype_append(NODE_OT_output_file_add_socket);
WM_operatortype_append(NODE_OT_output_file_remove_active_socket);
A number of changes to node RNA and the file output node, to simplify socket types and make node code more robust for future nodes with extra socket data. * Removed the struct_type identifier from sockets completely. Any specialization of socket types can be done by using separate collections in RNA and customized socket draw callbacks in node type. Sockets themselves are pure data inputs/outputs now. Possibly the sock->storage data could also be removed, but this will change anyway with id properties in custom nodes. * Replaced the direct socket button draw calls by extra callbacks in node types. This allows nodes to draw sockets in specialized ways without referring to the additional struct_type identifier. Default is simply drawing the socket default_value button, only file output node overrides this atm. * File output node slots now use a separate file sub-path in their storage data, instead of using the socket name. That way the path is an actual PROP_FILEPATH property and it works better with the UI list template (name property is local to the data struct). * Node draw contexts for options on the node itself and detail buttons in the sidebar now have an extra context pointer "node" (uiLayoutSetContextPointer). This can be used to bind operator buttons to a specific node, instead of having to rely on the active/selected node(s) or making weak links via node name. Compare to modifiers and logic bricks, they use the same feature. * Added another operator for reordering custom input slots in the file output node.
2012-05-02 07:18:51 +00:00
WM_operatortype_append(NODE_OT_output_file_move_active_socket);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
A number of new features for the node editor in general and the Frame node in particular. For an detailed user-level description of new features see the following blogpost: http://code.blender.org/index.php/2012/05/node-editing-tweaks/ TL;DR: * Frame node gets more usable bounding-box behavior * Node resizing has helpful mouse cursor indicators and works on all borders * Node selection/active colors are themeable independently * Customizable background colors for nodes (useful for frames visual distinction).
2012-05-22 14:13:33 +00:00
WM_operatortype_append(NODE_OT_parent_set);
WM_operatortype_append(NODE_OT_join);
WM_operatortype_append(NODE_OT_attach);
WM_operatortype_append(NODE_OT_detach);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
Clipboard feature for nodes. With the Copy operator a copy of all selected nodes and links between them is stored in an offscreen list (not in the library). The Paste operator then in turn copies these into the active node tree in the editor. Currently does not support copying of animation data. This would require copying of individual fcurves etc. between data block, which is not implemented yet. Also it is currently possible to circumvent some constraints of the nodes, in particular for node groups (e.g. no groups inside groups, render layer not inside groups).
2012-08-02 09:52:37 +00:00
WM_operatortype_append(NODE_OT_clipboard_copy);
WM_operatortype_append(NODE_OT_clipboard_paste);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
Render API: shader script node for custom shaders. * Shader script node added, which stores either a link to a text datablock or file on disk, and has functions to add and remove sockets. * Callback RenderEngine.update_script_node(self, node) added for render engines to compile the shader and update the node with new sockets. Thanks to Thomas, Lukas and Dalai for the implementation.
2012-11-03 14:32:26 +00:00
WM_operatortype_append(NODE_OT_shader_script_update);
Border for compositor viewer node feature This adds border option to compositor, which affects on a backdrop and viewer nodes, which is useful for faster previews and tweaks. Final compositing still happens for the whole frame, but if it'll be needed it's not so difficult to support it as well. To use border there's Ctrl-B shortcut in the compositor editor, which i used to define region you want to restrict compositing to. There's also "Viewer Border" option in the N-panel in case you'll want to disable border compositing. Some areas could be cleaned a bit, like ideally it shall not be viewer image clearing in viewer_border_update RNA callback, but currently it's not so much clear how to make it the same fast as simple memset and glue it somehow to compositor. Will think of nicer solution a bit later.
2013-03-07 17:47:30 +00:00
WM_operatortype_append(NODE_OT_viewer_border);
Experiment with the compositor border in editor Preserve buffer form previous runs so it's possible to make a compo of full frame, then draw a border and start tweaking nodes and see updates in that border. Main idea is to make it able to visually compare difference between what was changed inside the border and how frame looked before the tweaks outside of the border. Also implemented Clear Viewer Border in compositor, shortcut it Ctrl-Alt-B. Reviewers: lukastoenne, jbakker CC: venomgfx, sebastian_k Differential Revision: https://developer.blender.org/D582
2014-06-05 20:05:41 +06:00
WM_operatortype_append(NODE_OT_clear_viewer_border);
Merge of the PyNodes branch (aka "custom nodes") into trunk. PyNodes opens up the node system in Blender to scripters and adds a number of UI-level improvements. === Dynamic node type registration === Node types can now be added at runtime, using the RNA registration mechanism from python. This enables addons such as render engines to create a complete user interface with nodes. Examples of how such nodes can be defined can be found in my personal wiki docs atm [1] and as a script template in release/scripts/templates_py/custom_nodes.py [2]. === Node group improvements === Each node editor now has a tree history of edited node groups, which allows opening and editing nested node groups. The node editor also supports pinning now, so that different spaces can be used to edit different node groups simultaneously. For more ramblings and rationale see (really old) blog post on code.blender.org [3]. The interface of node groups has been overhauled. Sockets of a node group are no longer displayed in columns on either side, but instead special input/output nodes are used to mirror group sockets inside a node tree. This solves the problem of long node lines in groups and allows more adaptable node layout. Internal sockets can be exposed from a group by either connecting to the extension sockets in input/output nodes (shown as empty circle) or by adding sockets from the node property bar in the "Interface" panel. Further details such as the socket name can also be changed there. [1] http://wiki.blender.org/index.php/User:Phonybone/Python_Nodes [2] http://projects.blender.org/scm/viewvc.php/trunk/blender/release/scripts/templates_py/custom_nodes.py?view=markup&root=bf-blender [3] http://code.blender.org/index.php/2012/01/improving-node-group-interface-editing/
2013-03-18 16:34:57 +00:00
Multi-View and Stereo 3D Official Documentation: http://www.blender.org/manual/render/workflows/multiview.html Implemented Features ==================== Builtin Stereo Camera * Convergence Mode * Interocular Distance * Convergence Distance * Pivot Mode Viewport * Cameras * Plane * Volume Compositor * View Switch Node * Image Node Multi-View OpenEXR support Sequencer * Image/Movie Strips 'Use Multiview' UV/Image Editor * Option to see Multi-View images in Stereo-3D or its individual images * Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images I/O * Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images Scene Render Views * Ability to have an arbitrary number of views in the scene Missing Bits ============ First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report. Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report. Everything else is likely small todos, and may wait until we are sure none of the above is happening. Apart from that there are those known issues: * Compositor Image Node poorly working for Multi-View OpenEXR (this was working prefectly before the 'Use Multi-View' functionality) * Selecting camera from Multi-View when looking from camera is problematic * Animation Playback (ctrl+F11) doesn't support stereo formats * Wrong filepath when trying to play back animated scene * Viewport Rendering doesn't support Multi-View * Overscan Rendering * Fullscreen display modes need to warn the user * Object copy should be aware of views suffix Acknowledgments =============== * Francesco Siddi for the help with the original feature specs and design * Brecht Van Lommel for the original review of the code and design early on * Blender Foundation for the Development Fund to support the project wrap up Final patch reviewers: * Antony Riakiotakis (psy-fi) * Campbell Barton (ideasman42) * Julian Eisel (Severin) * Sergey Sharybin (nazgul) * Thomas Dinged (dingto) Code contributors of the original branch in github: * Alexey Akishin * Gabriel Caraballo
2015-04-06 10:40:12 -03:00
WM_operatortype_append(NODE_OT_switch_view_update);
Merge of the PyNodes branch (aka "custom nodes") into trunk. PyNodes opens up the node system in Blender to scripters and adds a number of UI-level improvements. === Dynamic node type registration === Node types can now be added at runtime, using the RNA registration mechanism from python. This enables addons such as render engines to create a complete user interface with nodes. Examples of how such nodes can be defined can be found in my personal wiki docs atm [1] and as a script template in release/scripts/templates_py/custom_nodes.py [2]. === Node group improvements === Each node editor now has a tree history of edited node groups, which allows opening and editing nested node groups. The node editor also supports pinning now, so that different spaces can be used to edit different node groups simultaneously. For more ramblings and rationale see (really old) blog post on code.blender.org [3]. The interface of node groups has been overhauled. Sockets of a node group are no longer displayed in columns on either side, but instead special input/output nodes are used to mirror group sockets inside a node tree. This solves the problem of long node lines in groups and allows more adaptable node layout. Internal sockets can be exposed from a group by either connecting to the extension sockets in input/output nodes (shown as empty circle) or by adding sockets from the node property bar in the "Interface" panel. Further details such as the socket name can also be changed there. [1] http://wiki.blender.org/index.php/User:Phonybone/Python_Nodes [2] http://projects.blender.org/scm/viewvc.php/trunk/blender/release/scripts/templates_py/custom_nodes.py?view=markup&root=bf-blender [3] http://code.blender.org/index.php/2012/01/improving-node-group-interface-editing/
2013-03-18 16:34:57 +00:00
WM_operatortype_append(NODE_OT_tree_socket_add);
WM_operatortype_append(NODE_OT_tree_socket_remove);
WM_operatortype_append(NODE_OT_tree_socket_move);
Compositor: Cryptomatte compositing node. This patch adds a new matte node that implements the Cryptomatte specification. It also incluces a custom eye dropper that works outside of a color picker. Cryptomatte export for the Cycles render engine will be in a separate patch. Reviewers: brecht Reviewed By: brecht Subscribers: brecht Tags: #compositing Differential Revision: https://developer.blender.org/D3531
2018-07-18 13:03:09 +02:00
WM_operatortype_append(NODE_OT_cryptomatte_layer_add);
WM_operatortype_append(NODE_OT_cryptomatte_layer_remove);
2.5 / Nodes * WIP selection operator. - selection is made, but redraw is still missing.
2008-12-28 00:08:34 +00:00
}
Node Editor - More Cleanups (Reshuffling): - removing duplicate chunks of code -> hide unused sockets now works - moving some functions to the files that they get called from -> view all/home - made duplicate a macro operator like the other places that work like this, eliminating the unnecessary transform-related property there still - removed a few chunks of unused code
2009-11-20 21:04:41 +00:00
void ED_operatormacros_node(void)
{
wmOperatorType *ot;
Little modification of the duplicate operator on artist request: The default behavior (shift+dkey) is now to copy nodes and internal links, but not the input links from unselected nodes. This feature is available with the alternate duplicate operator (alt+dkey).
2011-07-17 18:04:28 +00:00
wmOperatorTypeMacro *mot;
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
A number of new features for the node editor in general and the Frame node in particular. For an detailed user-level description of new features see the following blogpost: http://code.blender.org/index.php/2012/05/node-editing-tweaks/ TL;DR: * Frame node gets more usable bounding-box behavior * Node resizing has helpful mouse cursor indicators and works on all borders * Node selection/active colors are themeable independently * Customizable background colors for nodes (useful for frames visual distinction).
2012-05-22 14:13:33 +00:00
ot = WM_operatortype_append_macro("NODE_OT_select_link_viewer", "Link Viewer",
"Select node and link it to a viewer node",
OPTYPE_UNDO);
WM_operatortype_macro_define(ot, "NODE_OT_select");
WM_operatortype_macro_define(ot, "NODE_OT_link_viewer");
ot = WM_operatortype_append_macro("NODE_OT_translate_attach", "Move and Attach",
"Move nodes and attach to frame",
style cleanup
2012-08-04 12:54:27 +00:00
OPTYPE_UNDO | OPTYPE_REGISTER);
A number of new features for the node editor in general and the Frame node in particular. For an detailed user-level description of new features see the following blogpost: http://code.blender.org/index.php/2012/05/node-editing-tweaks/ TL;DR: * Frame node gets more usable bounding-box behavior * Node resizing has helpful mouse cursor indicators and works on all borders * Node selection/active colors are themeable independently * Customizable background colors for nodes (useful for frames visual distinction).
2012-05-22 14:13:33 +00:00
mot = WM_operatortype_macro_define(ot, "TRANSFORM_OT_translate");
Code cleanup: remove TRUE/FALSE & WITH_BOOL_COMPAT define
2014-04-01 11:34:00 +11:00
RNA_boolean_set(mot->ptr, "release_confirm", true);
A number of new features for the node editor in general and the Frame node in particular. For an detailed user-level description of new features see the following blogpost: http://code.blender.org/index.php/2012/05/node-editing-tweaks/ TL;DR: * Frame node gets more usable bounding-box behavior * Node resizing has helpful mouse cursor indicators and works on all borders * Node selection/active colors are themeable independently * Customizable background colors for nodes (useful for frames visual distinction).
2012-05-22 14:13:33 +00:00
WM_operatortype_macro_define(ot, "NODE_OT_attach");
Note Editor: Auto-offset nodes on insertion Implements "Auto-offset" (called "insert offset" in code) feature for Node Editor, developed during and after LSOC :) Idea and sponsoring by Sebastian König, blendFX, Mathias Eimann, Mikavaa, Knick Design When you drop a node with at least one input and one output socket onto a an existing connection between two nodes, Auto-offset will, depending on the direction setting, automatically and animated move the left or right and all of its following nodes away to make room for the new node. The direction for offsetting can be toggled while you are moving the node by pressing „T“. The auto-offset is enabled by default but can be disabled in the header of the node-editor. The offset margin can be changed in the editing section of the User Preferences. Thanks a lot to the sponsors, and especially to Sebastian who helped *a lot* with this. That's how users can help developing Blender!
2015-08-01 17:39:48 +02:00
WM_operatortype_macro_define(ot, "NODE_OT_insert_offset");
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
Note Editor: Auto-offset nodes on insertion Implements "Auto-offset" (called "insert offset" in code) feature for Node Editor, developed during and after LSOC :) Idea and sponsoring by Sebastian König, blendFX, Mathias Eimann, Mikavaa, Knick Design When you drop a node with at least one input and one output socket onto a an existing connection between two nodes, Auto-offset will, depending on the direction setting, automatically and animated move the left or right and all of its following nodes away to make room for the new node. The direction for offsetting can be toggled while you are moving the node by pressing „T“. The auto-offset is enabled by default but can be disabled in the header of the node-editor. The offset margin can be changed in the editing section of the User Preferences. Thanks a lot to the sponsors, and especially to Sebastian who helped *a lot* with this. That's how users can help developing Blender!
2015-08-01 17:39:48 +02:00
/* NODE_OT_translate_attach with remove_on_canel set to true */
ot = WM_operatortype_append_macro("NODE_OT_translate_attach_remove_on_cancel", "Move and Attach",
"Move nodes and attach to frame",
OPTYPE_UNDO | OPTYPE_REGISTER);
mot = WM_operatortype_macro_define(ot, "TRANSFORM_OT_translate");
RNA_boolean_set(mot->ptr, "release_confirm", true);
RNA_boolean_set(mot->ptr, "remove_on_cancel", true);
WM_operatortype_macro_define(ot, "NODE_OT_attach");
WM_operatortype_macro_define(ot, "NODE_OT_insert_offset");
A number of new features for the node editor in general and the Frame node in particular. For an detailed user-level description of new features see the following blogpost: http://code.blender.org/index.php/2012/05/node-editing-tweaks/ TL;DR: * Frame node gets more usable bounding-box behavior * Node resizing has helpful mouse cursor indicators and works on all borders * Node selection/active colors are themeable independently * Customizable background colors for nodes (useful for frames visual distinction).
2012-05-22 14:13:33 +00:00
Simplify node frame detach operators, based on T34670 by @julien. * The `NODE_OT_parent_clear` operator has been removed. This was a very simplistic operator that detached every selected node, which is not very useful in case of hierarchical frames. The `NODE_OT_detach` operator only detaches the top parent nodes in the selection, keeping the hierarchy of selected nodes intact. * The `ALT+P` shortcut has been reassigned to the `NODE_OT_detach` operator which replaces the previous `NODE_OT_clear` mapping with similar behavior (also gives a menu entry shortcut now). * Shortcuts for `NODE_OT_detach_translate_attach` have been removed, due to crowded and messy keymap and unintuitive shortcut `ALT+F`. This macro operator is still registered, in case hardcore users want to make their own keymaps, but not mapped by default. Node keymaps may need some redesign in the future for these things.
2014-11-05 11:35:48 +01:00
/* Note: Currently not in a default keymap or menu due to messy keymaps
* and tricky invoke functionality.
* Kept around in case users want to make own shortcuts.
*/
A number of new features for the node editor in general and the Frame node in particular. For an detailed user-level description of new features see the following blogpost: http://code.blender.org/index.php/2012/05/node-editing-tweaks/ TL;DR: * Frame node gets more usable bounding-box behavior * Node resizing has helpful mouse cursor indicators and works on all borders * Node selection/active colors are themeable independently * Customizable background colors for nodes (useful for frames visual distinction).
2012-05-22 14:13:33 +00:00
ot = WM_operatortype_append_macro("NODE_OT_detach_translate_attach", "Detach and Move",
"Detach nodes, move and attach to frame",
style cleanup
2012-08-04 12:54:27 +00:00
OPTYPE_UNDO | OPTYPE_REGISTER);
A number of new features for the node editor in general and the Frame node in particular. For an detailed user-level description of new features see the following blogpost: http://code.blender.org/index.php/2012/05/node-editing-tweaks/ TL;DR: * Frame node gets more usable bounding-box behavior * Node resizing has helpful mouse cursor indicators and works on all borders * Node selection/active colors are themeable independently * Customizable background colors for nodes (useful for frames visual distinction).
2012-05-22 14:13:33 +00:00
WM_operatortype_macro_define(ot, "NODE_OT_detach");
mot = WM_operatortype_macro_define(ot, "TRANSFORM_OT_translate");
Code cleanup: remove TRUE/FALSE & WITH_BOOL_COMPAT define
2014-04-01 11:34:00 +11:00
RNA_boolean_set(mot->ptr, "release_confirm", true);
A number of new features for the node editor in general and the Frame node in particular. For an detailed user-level description of new features see the following blogpost: http://code.blender.org/index.php/2012/05/node-editing-tweaks/ TL;DR: * Frame node gets more usable bounding-box behavior * Node resizing has helpful mouse cursor indicators and works on all borders * Node selection/active colors are themeable independently * Customizable background colors for nodes (useful for frames visual distinction).
2012-05-22 14:13:33 +00:00
WM_operatortype_macro_define(ot, "NODE_OT_attach");
ot = WM_operatortype_append_macro("NODE_OT_duplicate_move", "Duplicate",
"Duplicate selected nodes and move them",
style cleanup
2012-08-04 12:54:27 +00:00
OPTYPE_UNDO | OPTYPE_REGISTER);
Node Editor - More Cleanups (Reshuffling): - removing duplicate chunks of code -> hide unused sockets now works - moving some functions to the files that they get called from -> view all/home - made duplicate a macro operator like the other places that work like this, eliminating the unnecessary transform-related property there still - removed a few chunks of unused code
2009-11-20 21:04:41 +00:00
WM_operatortype_macro_define(ot, "NODE_OT_duplicate");
A number of new features for the node editor in general and the Frame node in particular. For an detailed user-level description of new features see the following blogpost: http://code.blender.org/index.php/2012/05/node-editing-tweaks/ TL;DR: * Frame node gets more usable bounding-box behavior * Node resizing has helpful mouse cursor indicators and works on all borders * Node selection/active colors are themeable independently * Customizable background colors for nodes (useful for frames visual distinction).
2012-05-22 14:13:33 +00:00
WM_operatortype_macro_define(ot, "NODE_OT_translate_attach");
Request: auto link to viewer node back. Used to be ctrl+click, is now shift+ctrl+click, because the ctrl_click goes to knife cutting. Implementation note: this is a macro, select + link.
2010-04-05 18:34:18 +00:00
Little modification of the duplicate operator on artist request: The default behavior (shift+dkey) is now to copy nodes and internal links, but not the input links from unselected nodes. This feature is available with the alternate duplicate operator (alt+dkey).
2011-07-17 18:04:28 +00:00
/* modified operator call for duplicating with input links */
Fix related to [#31157]: Tips (descriptions) of macro operators were not set into underlying RNA struct, hence did not show up in UI.
2012-05-05 19:26:53 +00:00
ot = WM_operatortype_append_macro("NODE_OT_duplicate_move_keep_inputs", "Duplicate",
"Duplicate selected nodes keeping input links and move them",
style cleanup
2012-08-04 12:54:27 +00:00
OPTYPE_UNDO | OPTYPE_REGISTER);
Little modification of the duplicate operator on artist request: The default behavior (shift+dkey) is now to copy nodes and internal links, but not the input links from unselected nodes. This feature is available with the alternate duplicate operator (alt+dkey).
2011-07-17 18:04:28 +00:00
mot = WM_operatortype_macro_define(ot, "NODE_OT_duplicate");
Code cleanup: remove TRUE/FALSE & WITH_BOOL_COMPAT define
2014-04-01 11:34:00 +11:00
RNA_boolean_set(mot->ptr, "keep_inputs", true);
A number of new features for the node editor in general and the Frame node in particular. For an detailed user-level description of new features see the following blogpost: http://code.blender.org/index.php/2012/05/node-editing-tweaks/ TL;DR: * Frame node gets more usable bounding-box behavior * Node resizing has helpful mouse cursor indicators and works on all borders * Node selection/active colors are themeable independently * Customizable background colors for nodes (useful for frames visual distinction).
2012-05-22 14:13:33 +00:00
WM_operatortype_macro_define(ot, "NODE_OT_translate_attach");
Implements a new operator for detaching nodes. In the process i overhauled the node muting system as well. There are a number of features that use a kind of "internal linking" in nodes: 1. muting 2. delete + reconnect (restore link to/from node after delete) 3. the new detach operator (same as 2, but don't delete the node) The desired behavior in all cases is the same: find a sensible mapping of inputs-to-outputs of a node. In the case of muting these links are displayed in red on the node itself. For the other operators they are used to relink connections, such that one gets the best possible ongoing link between previous up- and downstream nodes. Muting previously used a complicated callback system to ensure consistent behavior in the editor as well as execution in compositor, shader cpu/gpu and texture nodes. This has been greatly simplified by moving the muting step into the node tree localization functions. Any muted node is now bypassed using the generalized nodeInternalRelink function and then removed from the local tree. This way the internal execution system doesn't have to deal with muted nodes at all, as if they are non-existent. The same function is also used by the delete_reconnect and the new links_detach operators (which work directly in the editor node tree). Detaching nodes is currently keymapped as a translation variant (macro operator): pressing ALTKEY + moving node first detaches and then continues with regular transform operator. The default key is ALT+DKEY though, instead ALT+GKEY, since the latter is already used for the ungroup operator.
2012-02-27 17:38:16 +00:00
Fix related to [#31157]: Tips (descriptions) of macro operators were not set into underlying RNA struct, hence did not show up in UI.
2012-05-05 19:26:53 +00:00
ot = WM_operatortype_append_macro("NODE_OT_move_detach_links", "Detach", "Move a node to detach links",
style cleanup
2012-08-04 12:54:27 +00:00
OPTYPE_UNDO | OPTYPE_REGISTER);
Implements a new operator for detaching nodes. In the process i overhauled the node muting system as well. There are a number of features that use a kind of "internal linking" in nodes: 1. muting 2. delete + reconnect (restore link to/from node after delete) 3. the new detach operator (same as 2, but don't delete the node) The desired behavior in all cases is the same: find a sensible mapping of inputs-to-outputs of a node. In the case of muting these links are displayed in red on the node itself. For the other operators they are used to relink connections, such that one gets the best possible ongoing link between previous up- and downstream nodes. Muting previously used a complicated callback system to ensure consistent behavior in the editor as well as execution in compositor, shader cpu/gpu and texture nodes. This has been greatly simplified by moving the muting step into the node tree localization functions. Any muted node is now bypassed using the generalized nodeInternalRelink function and then removed from the local tree. This way the internal execution system doesn't have to deal with muted nodes at all, as if they are non-existent. The same function is also used by the delete_reconnect and the new links_detach operators (which work directly in the editor node tree). Detaching nodes is currently keymapped as a translation variant (macro operator): pressing ALTKEY + moving node first detaches and then continues with regular transform operator. The default key is ALT+DKEY though, instead ALT+GKEY, since the latter is already used for the ungroup operator.
2012-02-27 17:38:16 +00:00
WM_operatortype_macro_define(ot, "NODE_OT_links_detach");
Fix for bug #31169. Don't force the release-confirm setting in node transform operators when using the select-mouse tweak event. Instead the release confirm setting in user preferences is used in that case. For the alternative action-mouse tweak event the behavior remains the same.
2012-05-01 08:19:11 +00:00
WM_operatortype_macro_define(ot, "TRANSFORM_OT_translate");
Use Auto-offset for move_detach_links (alt+D) operator too
2015-08-01 20:59:55 +02:00
WM_operatortype_macro_define(ot, "NODE_OT_insert_offset");
Fix for bug #31169. Don't force the release-confirm setting in node transform operators when using the select-mouse tweak event. Instead the release confirm setting in user preferences is used in that case. For the alternative action-mouse tweak event the behavior remains the same.
2012-05-01 08:19:11 +00:00
Fix related to [#31157]: Tips (descriptions) of macro operators were not set into underlying RNA struct, hence did not show up in UI.
2012-05-05 19:26:53 +00:00
ot = WM_operatortype_append_macro("NODE_OT_move_detach_links_release", "Detach", "Move a node to detach links",
style cleanup
2012-08-04 12:54:27 +00:00
OPTYPE_UNDO | OPTYPE_REGISTER);
Fix for bug #31169. Don't force the release-confirm setting in node transform operators when using the select-mouse tweak event. Instead the release confirm setting in user preferences is used in that case. For the alternative action-mouse tweak event the behavior remains the same.
2012-05-01 08:19:11 +00:00
WM_operatortype_macro_define(ot, "NODE_OT_links_detach");
quiet some warnings.
2012-10-01 15:27:50 +00:00
WM_operatortype_macro_define(ot, "NODE_OT_translate_attach");
A number of new features for the node editor in general and the Frame node in particular. For an detailed user-level description of new features see the following blogpost: http://code.blender.org/index.php/2012/05/node-editing-tweaks/ TL;DR: * Frame node gets more usable bounding-box behavior * Node resizing has helpful mouse cursor indicators and works on all borders * Node selection/active colors are themeable independently * Customizable background colors for nodes (useful for frames visual distinction).
2012-05-22 14:13:33 +00:00
}
Key Configuration Keymaps are now saveable and configurable from the user preferences, note that editing one item in a keymap means the whole keymap is now defined by the user and will not be updated by Blender, an option for syncing might be added later. The outliner interface is still there, but I will probably remove it. There's actually 3 levels now: * Default builtin key configuration. * Key configuration loaded from .py file, for configs like Blender 2.4x or other 3D applications. * Keymaps edited by the user and saved in .B.blend. These can be saved to .py files as well to make creating distributable configurations easier. Also, user preferences sections were reorganized a bit, now there is: Interface, Editing, Input, Files and System. Implementation notes: * wmKeyConfig was added which represents a key configuration containing keymaps. * wmKeymapItem was renamed to wmKeyMapItem for consistency with wmKeyMap. * Modal maps are not wrapped yet. * User preferences DNA file reading did not support newdataadr() yet, added this now for reading keymaps. * Key configuration related settings are now RNA wrapped. * is_property_set and is_property_hidden python methods were added.
2009-10-08 18:40:03 +00:00
void node_keymap(struct wmKeyConfig *keyconf)
2.5 / Nodes * WIP selection operator. - selection is made, but redraw is still missing.
2008-12-28 00:08:34 +00:00
{
Grease Pencil for Nodes Editor: This commit restores Grease Pencil functionality for the Nodes Editor. Grease Pencil data is now stored at the NodeTree level, which means that annotations remain with the NodeTree they were made for. Possible TODO's: * In future, it may be worth investigating attaching Grease Pencil data to individual nodes, to allow annotations to stay attached to nodes as they are moved * Include the settings for the 'active node' in a panel in the new NKEY region where the Grease Pencil buttons appear.
2009-11-11 08:12:54 +00:00
/* Entire Editor only ----------------- */
Keymap: move builtin keymaps from C to Python This should be purely an implementation change, for end users there should be no functional difference. The entire key configuration is in one file with ~5000 lines of code. Mostly avoiding code duplication and preserve comments and utility functions from the C code. It's a bit long but for searching and editing it's also convenient to have it all in one file. Notes: - Actual keymap is shared by blender / blender_legacy and stored in `keymap_data/blender_default.py` This only generates JSON-like data to be passed into `keyconfig_import_from_data`, allowing other presets to load and manipulate the default keymap. - Each preset defines 'keyconfig_data' which can be shared between presets. - Some of the utility functions for generating keymap items still need to be ported over to Python. - Some keymap items can be made into loops (marked as TODO). See: D3907
2018-11-08 15:59:51 +11:00
WM_keymap_ensure(keyconf, "Node Generic", SPACE_NODE, 0);
Cleanup: strip trailing space in editors
2018-06-04 09:31:30 +02:00
Cleanup: 'area' vs 'region' Apparently this is the result of some sloppiness during 2.5 project and since then it confused people who were trying to understand the area-region relation (myself included). Sorry if this causes merge conflicts for anyone, but at some point we really had to do it :/
2015-11-28 17:14:45 +01:00
/* Main Region only ----------------- */
Keymap: move builtin keymaps from C to Python This should be purely an implementation change, for end users there should be no functional difference. The entire key configuration is in one file with ~5000 lines of code. Mostly avoiding code duplication and preserve comments and utility functions from the C code. It's a bit long but for searching and editing it's also convenient to have it all in one file. Notes: - Actual keymap is shared by blender / blender_legacy and stored in `keymap_data/blender_default.py` This only generates JSON-like data to be passed into `keyconfig_import_from_data`, allowing other presets to load and manipulate the default keymap. - Each preset defines 'keyconfig_data' which can be shared between presets. - Some of the utility functions for generating keymap items still need to be ported over to Python. - Some keymap items can be made into loops (marked as TODO). See: D3907
2018-11-08 15:59:51 +11:00
WM_keymap_ensure(keyconf, "Node Editor", SPACE_NODE, 0);
2.5 / Nodes * WIP selection operator. - selection is made, but redraw is still missing.
2008-12-28 00:08:34 +00:00
}
Copy Permalink