Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
/*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
|
* as published by the Free Software Foundation; either version 2
|
|
|
|
|
* of the License, or (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
|
|
|
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
|
|
|
*
|
|
|
|
|
* The Original Code is Copyright (C) 2013 Blender Foundation.
|
|
|
|
|
* All rights reserved.
|
2015-05-20 12:54:45 +10:00
|
|
|
*/
|
|
|
|
|
|
2019-02-18 08:08:12 +11:00
|
|
|
/** \file
|
|
|
|
|
* \ingroup depsgraph
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
*
|
2015-05-20 12:54:45 +10:00
|
|
|
* Methods for constructing depsgraph.
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include "MEM_guardedalloc.h"
|
|
|
|
|
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
#include "BLI_utildefines.h"
|
|
|
|
|
#include "BLI_ghash.h"
|
2017-11-14 17:00:10 +11:00
|
|
|
#include "BLI_listbase.h"
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
|
2018-02-22 10:35:04 +01:00
|
|
|
#include "PIL_time.h"
|
|
|
|
|
#include "PIL_time_utildefines.h"
|
2016-11-03 13:24:41 +01:00
|
|
|
|
2017-06-06 12:14:39 +02:00
|
|
|
extern "C" {
|
|
|
|
|
#include "DNA_cachefile_types.h"
|
|
|
|
|
#include "DNA_object_types.h"
|
|
|
|
|
#include "DNA_scene_types.h"
|
|
|
|
|
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
#include "BKE_main.h"
|
2017-11-03 17:03:33 +01:00
|
|
|
#include "BKE_scene.h"
|
2017-06-06 12:14:39 +02:00
|
|
|
} /* extern "C" */
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
|
|
|
|
|
#include "DEG_depsgraph.h"
|
|
|
|
|
#include "DEG_depsgraph_debug.h"
|
|
|
|
|
#include "DEG_depsgraph_build.h"
|
|
|
|
|
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
#include "builder/deg_builder.h"
|
|
|
|
|
#include "builder/deg_builder_cycle.h"
|
|
|
|
|
#include "builder/deg_builder_nodes.h"
|
|
|
|
|
#include "builder/deg_builder_relations.h"
|
|
|
|
|
#include "builder/deg_builder_transitive.h"
|
|
|
|
|
|
2019-01-31 12:56:40 +01:00
|
|
|
#include "intern/debug/deg_debug.h"
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
|
2019-01-31 12:56:40 +01:00
|
|
|
#include "intern/node/deg_node.h"
|
|
|
|
|
#include "intern/node/deg_node_component.h"
|
|
|
|
|
#include "intern/node/deg_node_id.h"
|
|
|
|
|
#include "intern/node/deg_node_operation.h"
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
|
2019-01-31 12:56:40 +01:00
|
|
|
#include "intern/depsgraph_type.h"
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
|
|
|
|
|
/* ****************** */
|
|
|
|
|
/* External Build API */
|
|
|
|
|
|
2019-01-31 12:56:40 +01:00
|
|
|
static DEG::NodeType deg_build_scene_component_type(
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
eDepsSceneComponentType component)
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
|
|
|
|
switch (component) {
|
2019-01-31 12:56:40 +01:00
|
|
|
case DEG_SCENE_COMP_PARAMETERS: return DEG::NodeType::PARAMETERS;
|
|
|
|
|
case DEG_SCENE_COMP_ANIMATION: return DEG::NodeType::ANIMATION;
|
|
|
|
|
case DEG_SCENE_COMP_SEQUENCER: return DEG::NodeType::SEQUENCER;
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
2019-01-31 12:56:40 +01:00
|
|
|
return DEG::NodeType::UNDEFINED;
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
2019-01-31 12:56:40 +01:00
|
|
|
static DEG::NodeType deg_build_object_component_type(
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
eDepsObjectComponentType component)
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
|
|
|
|
switch (component) {
|
2019-01-31 12:56:40 +01:00
|
|
|
case DEG_OB_COMP_PARAMETERS: return DEG::NodeType::PARAMETERS;
|
|
|
|
|
case DEG_OB_COMP_PROXY: return DEG::NodeType::PROXY;
|
|
|
|
|
case DEG_OB_COMP_ANIMATION: return DEG::NodeType::ANIMATION;
|
|
|
|
|
case DEG_OB_COMP_TRANSFORM: return DEG::NodeType::TRANSFORM;
|
|
|
|
|
case DEG_OB_COMP_GEOMETRY: return DEG::NodeType::GEOMETRY;
|
|
|
|
|
case DEG_OB_COMP_EVAL_POSE: return DEG::NodeType::EVAL_POSE;
|
|
|
|
|
case DEG_OB_COMP_BONE: return DEG::NodeType::BONE;
|
|
|
|
|
case DEG_OB_COMP_SHADING: return DEG::NodeType::SHADING;
|
|
|
|
|
case DEG_OB_COMP_CACHE: return DEG::NodeType::CACHE;
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
2019-01-31 12:56:40 +01:00
|
|
|
return DEG::NodeType::UNDEFINED;
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
2018-11-14 11:24:54 +01:00
|
|
|
static DEG::DepsNodeHandle *get_node_handle(DepsNodeHandle *node_handle)
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
2018-11-14 11:24:54 +01:00
|
|
|
return reinterpret_cast<DEG::DepsNodeHandle *>(node_handle);
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
2018-11-14 11:24:54 +01:00
|
|
|
void DEG_add_scene_relation(DepsNodeHandle *node_handle,
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
Scene *scene,
|
|
|
|
|
eDepsSceneComponentType component,
|
|
|
|
|
const char *description)
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
2019-01-31 12:56:40 +01:00
|
|
|
DEG::NodeType type = deg_build_scene_component_type(component);
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
DEG::ComponentKey comp_key(&scene->id, type);
|
2018-11-14 11:24:54 +01:00
|
|
|
DEG::DepsNodeHandle *deg_node_handle = get_node_handle(node_handle);
|
|
|
|
|
deg_node_handle->builder->add_node_handle_relation(comp_key,
|
|
|
|
|
deg_node_handle,
|
|
|
|
|
description);
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
2018-11-14 11:24:54 +01:00
|
|
|
void DEG_add_object_relation(DepsNodeHandle *node_handle,
|
2017-11-23 11:39:28 +01:00
|
|
|
Object *object,
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
eDepsObjectComponentType component,
|
|
|
|
|
const char *description)
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
2019-01-31 12:56:40 +01:00
|
|
|
DEG::NodeType type = deg_build_object_component_type(component);
|
2017-11-23 11:39:28 +01:00
|
|
|
DEG::ComponentKey comp_key(&object->id, type);
|
2018-11-14 11:24:54 +01:00
|
|
|
DEG::DepsNodeHandle *deg_node_handle = get_node_handle(node_handle);
|
|
|
|
|
deg_node_handle->builder->add_node_handle_relation(comp_key,
|
|
|
|
|
deg_node_handle,
|
|
|
|
|
description);
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
}
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
|
2018-11-14 11:24:54 +01:00
|
|
|
void DEG_add_object_cache_relation(DepsNodeHandle *node_handle,
|
Basic Alembic support
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
2016-08-06 06:20:37 +02:00
|
|
|
CacheFile *cache_file,
|
|
|
|
|
eDepsObjectComponentType component,
|
|
|
|
|
const char *description)
|
|
|
|
|
{
|
2019-01-31 12:56:40 +01:00
|
|
|
DEG::NodeType type = deg_build_object_component_type(component);
|
Basic Alembic support
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
2016-08-06 06:20:37 +02:00
|
|
|
DEG::ComponentKey comp_key(&cache_file->id, type);
|
2018-11-14 11:24:54 +01:00
|
|
|
DEG::DepsNodeHandle *deg_node_handle = get_node_handle(node_handle);
|
|
|
|
|
deg_node_handle->builder->add_node_handle_relation(comp_key,
|
|
|
|
|
deg_node_handle,
|
|
|
|
|
description);
|
Basic Alembic support
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
2016-08-06 06:20:37 +02:00
|
|
|
}
|
|
|
|
|
|
2018-11-14 11:24:54 +01:00
|
|
|
void DEG_add_bone_relation(DepsNodeHandle *node_handle,
|
2017-11-23 11:39:28 +01:00
|
|
|
Object *object,
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
const char *bone_name,
|
|
|
|
|
eDepsObjectComponentType component,
|
|
|
|
|
const char *description)
|
|
|
|
|
{
|
2019-01-31 12:56:40 +01:00
|
|
|
DEG::NodeType type = deg_build_object_component_type(component);
|
2017-11-23 11:39:28 +01:00
|
|
|
DEG::ComponentKey comp_key(&object->id, type, bone_name);
|
2018-11-14 11:24:54 +01:00
|
|
|
DEG::DepsNodeHandle *deg_node_handle = get_node_handle(node_handle);
|
|
|
|
|
deg_node_handle->builder->add_node_handle_relation(comp_key,
|
|
|
|
|
deg_node_handle,
|
|
|
|
|
description);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void DEG_add_object_pointcache_relation(struct DepsNodeHandle *node_handle,
|
|
|
|
|
struct Object *object,
|
|
|
|
|
eDepsObjectComponentType component,
|
|
|
|
|
const char *description)
|
|
|
|
|
{
|
2019-01-31 12:56:40 +01:00
|
|
|
DEG::NodeType type = deg_build_object_component_type(component);
|
2018-11-14 11:24:54 +01:00
|
|
|
DEG::ComponentKey comp_key(&object->id, type);
|
|
|
|
|
DEG::DepsNodeHandle *deg_node_handle = get_node_handle(node_handle);
|
|
|
|
|
DEG::DepsgraphRelationBuilder *relation_builder = deg_node_handle->builder;
|
|
|
|
|
/* Add relation from source to the node handle. */
|
|
|
|
|
relation_builder->add_node_handle_relation(
|
|
|
|
|
comp_key, deg_node_handle, description);
|
|
|
|
|
/* Node deduct point cache component and connect source to it. */
|
|
|
|
|
ID *id = DEG_get_id_from_handle(node_handle);
|
2019-01-31 12:56:40 +01:00
|
|
|
DEG::ComponentKey point_cache_key(id, DEG::NodeType::POINT_CACHE);
|
|
|
|
|
DEG::Relation *rel = relation_builder->add_relation(
|
2018-11-14 11:24:54 +01:00
|
|
|
comp_key, point_cache_key, "Point Cache");
|
2018-11-15 11:23:59 +01:00
|
|
|
if (rel != NULL) {
|
2019-01-31 12:56:40 +01:00
|
|
|
rel->flag |= DEG::RELATION_FLAG_FLUSH_USER_EDIT_ONLY;
|
2018-11-15 11:23:59 +01:00
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"Error in point cache relation from %s to ^%s.\n",
|
|
|
|
|
object->id.name,
|
|
|
|
|
id->name);
|
|
|
|
|
}
|
2018-11-14 11:24:54 +01:00
|
|
|
}
|
|
|
|
|
|
2018-12-05 17:35:13 +01:00
|
|
|
void DEG_add_generic_id_relation(struct DepsNodeHandle *node_handle,
|
|
|
|
|
struct ID *id,
|
|
|
|
|
const char *description)
|
|
|
|
|
{
|
|
|
|
|
DEG::OperationKey operation_key(
|
|
|
|
|
id,
|
2019-01-31 12:56:40 +01:00
|
|
|
DEG::NodeType::GENERIC_DATABLOCK,
|
|
|
|
|
DEG::OperationCode::GENERIC_DATABLOCK_UPDATE);
|
2018-12-05 17:35:13 +01:00
|
|
|
DEG::DepsNodeHandle *deg_node_handle = get_node_handle(node_handle);
|
|
|
|
|
deg_node_handle->builder->add_node_handle_relation(operation_key,
|
|
|
|
|
deg_node_handle,
|
|
|
|
|
description);
|
|
|
|
|
}
|
|
|
|
|
|
2019-02-12 12:01:17 +01:00
|
|
|
void DEG_add_modifier_to_transform_relation(
|
|
|
|
|
struct DepsNodeHandle *node_handle,
|
|
|
|
|
const char *description)
|
|
|
|
|
{
|
|
|
|
|
DEG::DepsNodeHandle *deg_node_handle = get_node_handle(node_handle);
|
|
|
|
|
deg_node_handle->builder->add_modifier_to_transform_relation(
|
|
|
|
|
deg_node_handle,
|
|
|
|
|
description);
|
|
|
|
|
}
|
|
|
|
|
|
2018-11-14 11:24:54 +01:00
|
|
|
void DEG_add_special_eval_flag(struct DepsNodeHandle *node_handle,
|
|
|
|
|
ID *id,
|
|
|
|
|
uint32_t flag)
|
|
|
|
|
{
|
|
|
|
|
DEG::DepsNodeHandle *deg_node_handle = get_node_handle(node_handle);
|
|
|
|
|
deg_node_handle->builder->add_special_eval_flag(id, flag);
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
2018-12-03 18:09:45 +03:00
|
|
|
void DEG_add_customdata_mask(struct DepsNodeHandle *node_handle,
|
|
|
|
|
struct Object *object,
|
Refactor CDData masks, to have one mask per mesh elem type.
We already have different storages for cddata of verts, edges etc.,
'simply' do the same for the mask flags we use all around Blender code
to request some data, or limit some operation to some layers, etc.
Reason we need this is that some cddata types (like Normals) are
actually shared between verts/polys/loops, and we don’t want to generate
clnors everytime we request vnors!
As a side note, this also does final fix to T59338, which was the
trigger for this patch (need to request computed loop normals for
another mesh than evaluated one).
Reviewers: brecht, campbellbarton, sergey
Differential Revision: https://developer.blender.org/D4407
2019-03-07 11:13:40 +01:00
|
|
|
const CustomData_MeshMasks *masks)
|
2018-12-03 18:09:45 +03:00
|
|
|
{
|
|
|
|
|
DEG::DepsNodeHandle *deg_node_handle = get_node_handle(node_handle);
|
Refactor CDData masks, to have one mask per mesh elem type.
We already have different storages for cddata of verts, edges etc.,
'simply' do the same for the mask flags we use all around Blender code
to request some data, or limit some operation to some layers, etc.
Reason we need this is that some cddata types (like Normals) are
actually shared between verts/polys/loops, and we don’t want to generate
clnors everytime we request vnors!
As a side note, this also does final fix to T59338, which was the
trigger for this patch (need to request computed loop normals for
another mesh than evaluated one).
Reviewers: brecht, campbellbarton, sergey
Differential Revision: https://developer.blender.org/D4407
2019-03-07 11:13:40 +01:00
|
|
|
deg_node_handle->builder->add_customdata_mask(
|
|
|
|
|
object,
|
|
|
|
|
DEG::DEGCustomDataMeshMasks(masks));
|
2018-12-03 18:09:45 +03:00
|
|
|
}
|
|
|
|
|
|
2018-11-14 11:24:54 +01:00
|
|
|
struct ID *DEG_get_id_from_handle(struct DepsNodeHandle *node_handle)
|
2017-06-12 14:41:46 +02:00
|
|
|
{
|
2018-11-14 11:24:54 +01:00
|
|
|
DEG::DepsNodeHandle *deg_handle = get_node_handle(node_handle);
|
|
|
|
|
return deg_handle->node->owner->owner->id_orig;
|
2017-06-12 14:41:46 +02:00
|
|
|
}
|
|
|
|
|
|
2018-11-14 11:24:54 +01:00
|
|
|
struct Depsgraph *DEG_get_graph_from_handle(struct DepsNodeHandle *node_handle)
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
2018-11-14 11:24:54 +01:00
|
|
|
DEG::DepsNodeHandle *deg_node_handle = get_node_handle(node_handle);
|
|
|
|
|
DEG::DepsgraphRelationBuilder *relation_builder = deg_node_handle->builder;
|
2018-10-24 12:31:24 +03:00
|
|
|
return reinterpret_cast<Depsgraph *>(relation_builder->getGraph());
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* ******************** */
|
|
|
|
|
/* Graph Building API's */
|
|
|
|
|
|
2017-11-09 11:20:17 +01:00
|
|
|
/* Build depsgraph for the given scene layer, and dump results in given
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
* graph container.
|
|
|
|
|
*/
|
2017-11-22 10:52:39 -02:00
|
|
|
void DEG_graph_build_from_view_layer(Depsgraph *graph,
|
2017-11-09 11:20:17 +01:00
|
|
|
Main *bmain,
|
|
|
|
|
Scene *scene,
|
2017-11-22 10:52:39 -02:00
|
|
|
ViewLayer *view_layer)
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
2018-05-02 10:32:01 +02:00
|
|
|
double start_time = 0.0;
|
2019-02-15 15:33:50 +01:00
|
|
|
if (G.debug & (G_DEBUG_DEPSGRAPH_BUILD | G_DEBUG_DEPSGRAPH_TIME)) {
|
2018-02-22 10:35:04 +01:00
|
|
|
start_time = PIL_check_seconds_timer();
|
|
|
|
|
}
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
DEG::Depsgraph *deg_graph = reinterpret_cast<DEG::Depsgraph *>(graph);
|
2018-09-03 15:22:02 +02:00
|
|
|
/* Perform sanity checks. */
|
2017-11-30 13:44:09 -02:00
|
|
|
BLI_assert(BLI_findindex(&scene->view_layers, view_layer) != -1);
|
2018-04-18 17:43:15 +02:00
|
|
|
BLI_assert(deg_graph->scene == scene);
|
|
|
|
|
BLI_assert(deg_graph->view_layer == view_layer);
|
2018-09-03 15:22:02 +02:00
|
|
|
/* Generate all the nodes in the graph first */
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
DEG::DepsgraphNodeBuilder node_builder(bmain, deg_graph);
|
2017-11-08 17:43:53 +01:00
|
|
|
node_builder.begin_build();
|
2017-11-22 10:52:39 -02:00
|
|
|
node_builder.build_view_layer(scene,
|
|
|
|
|
view_layer,
|
2017-11-09 11:20:17 +01:00
|
|
|
DEG::DEG_ID_LINKED_DIRECTLY);
|
2017-11-24 15:07:09 +01:00
|
|
|
node_builder.end_build();
|
2018-09-03 15:22:02 +02:00
|
|
|
/* Hook up relationships between operations - to determine evaluation
|
2019-01-31 12:56:40 +01:00
|
|
|
* order. */
|
2017-11-08 17:43:53 +01:00
|
|
|
DEG::DepsgraphRelationBuilder relation_builder(bmain, deg_graph);
|
|
|
|
|
relation_builder.begin_build();
|
2017-11-22 10:52:39 -02:00
|
|
|
relation_builder.build_view_layer(scene, view_layer);
|
2018-05-31 13:42:55 +02:00
|
|
|
relation_builder.build_copy_on_write_relations();
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
/* Detect and solve cycles. */
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
DEG::deg_graph_detect_cycles(deg_graph);
|
2018-09-03 15:22:02 +02:00
|
|
|
/* Simplify the graph by removing redundant relations (to optimize
|
|
|
|
|
* traversal later). */
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
/* TODO: it would be useful to have an option to disable this in cases where
|
2019-01-31 12:56:40 +01:00
|
|
|
* it is causing trouble. */
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
if (G.debug_value == 799) {
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
DEG::deg_graph_transitive_reduction(deg_graph);
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
2018-09-03 15:22:02 +02:00
|
|
|
/* Store pointers to commonly used valuated datablocks. */
|
|
|
|
|
deg_graph->scene_cow = (Scene *)deg_graph->get_cow_id(°_graph->scene->id);
|
|
|
|
|
/* Flush visibility layer and re-schedule nodes for update. */
|
2017-10-25 13:27:13 +02:00
|
|
|
DEG::deg_graph_build_finalize(bmain, deg_graph);
|
2018-09-03 15:22:02 +02:00
|
|
|
DEG_graph_on_visible_update(bmain, graph);
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
#if 0
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
if (!DEG_debug_consistency_check(deg_graph)) {
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
printf("Consistency validation failed, ABORTING!\n");
|
|
|
|
|
abort();
|
|
|
|
|
}
|
|
|
|
|
#endif
|
2017-10-24 13:54:12 +02:00
|
|
|
/* Relations are up to date. */
|
|
|
|
|
deg_graph->need_update = false;
|
2018-09-03 15:22:02 +02:00
|
|
|
/* Finish statistics. */
|
2019-02-15 12:27:36 +01:00
|
|
|
if (G.debug & (G_DEBUG_DEPSGRAPH_BUILD | G_DEBUG_DEPSGRAPH_TIME)) {
|
2018-02-22 10:35:04 +01:00
|
|
|
printf("Depsgraph built in %f seconds.\n",
|
|
|
|
|
PIL_check_seconds_timer() - start_time);
|
|
|
|
|
}
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Tag graph relations for update. */
|
|
|
|
|
void DEG_graph_tag_relations_update(Depsgraph *graph)
|
|
|
|
|
{
|
2018-05-02 11:52:49 +02:00
|
|
|
DEG_DEBUG_PRINTF(graph, TAG, "%s: Tagging relations for update.\n", __func__);
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
DEG::Depsgraph *deg_graph = reinterpret_cast<DEG::Depsgraph *>(graph);
|
|
|
|
|
deg_graph->need_update = true;
|
2018-04-18 17:34:18 +02:00
|
|
|
/* NOTE: When relations are updated, it's quite possible that
|
|
|
|
|
* we've got new bases in the scene. This means, we need to
|
|
|
|
|
* re-create flat array of bases in view layer.
|
|
|
|
|
*
|
|
|
|
|
* TODO(sergey): Try to make it so we don't flush updates
|
2019-01-31 12:56:40 +01:00
|
|
|
* to the whole depsgraph. */
|
|
|
|
|
DEG::IDNode *id_node = deg_graph->find_id_node(°_graph->scene->id);
|
2018-11-14 11:24:54 +01:00
|
|
|
if (id_node != NULL) {
|
|
|
|
|
id_node->tag_update(deg_graph, DEG::DEG_UPDATE_SOURCE_RELATIONS);
|
2018-04-18 17:34:18 +02:00
|
|
|
}
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
2017-10-25 12:27:37 +02:00
|
|
|
/* Create or update relations in the specified graph. */
|
2017-11-09 11:20:17 +01:00
|
|
|
void DEG_graph_relations_update(Depsgraph *graph,
|
|
|
|
|
Main *bmain,
|
|
|
|
|
Scene *scene,
|
2017-11-22 10:52:39 -02:00
|
|
|
ViewLayer *view_layer)
|
2017-10-25 12:27:37 +02:00
|
|
|
{
|
|
|
|
|
DEG::Depsgraph *deg_graph = (DEG::Depsgraph *)graph;
|
|
|
|
|
if (!deg_graph->need_update) {
|
|
|
|
|
/* Graph is up to date, nothing to do. */
|
|
|
|
|
return;
|
|
|
|
|
}
|
2017-11-22 10:52:39 -02:00
|
|
|
DEG_graph_build_from_view_layer(graph, bmain, scene, view_layer);
|
2017-10-25 12:27:37 +02:00
|
|
|
}
|
|
|
|
|
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
/* Tag all relations for update. */
|
|
|
|
|
void DEG_relations_tag_update(Main *bmain)
|
|
|
|
|
{
|
2018-05-02 11:52:49 +02:00
|
|
|
DEG_GLOBAL_DEBUG_PRINTF(TAG, "%s: Tagging relations for update.\n", __func__);
|
2019-03-08 09:29:17 +11:00
|
|
|
LISTBASE_FOREACH (Scene *, scene, &bmain->scenes) {
|
2018-02-15 14:15:55 +01:00
|
|
|
LISTBASE_FOREACH (ViewLayer *, view_layer, &scene->view_layers) {
|
2017-11-07 16:29:31 +01:00
|
|
|
Depsgraph *depsgraph =
|
|
|
|
|
(Depsgraph *)BKE_scene_get_depsgraph(scene,
|
2017-11-22 10:52:39 -02:00
|
|
|
view_layer,
|
2017-11-07 16:29:31 +01:00
|
|
|
false);
|
2017-11-03 17:03:33 +01:00
|
|
|
if (depsgraph != NULL) {
|
|
|
|
|
DEG_graph_tag_relations_update(depsgraph);
|
|
|
|
|
}
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
