archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
6701f07e66368604fcd6286bbbd42f479c5c9880
blender-archive/source/blender/src/previewrender.c

945 lines
24 KiB
C
Raw Normal View History

Orange branch feature; Material Layering (WIP, don't bugs for this in tracker yet please!) - New Panel "Layers" in Material buttons, allows to add unlimited amount of materials on top of each other. - Every Layer is actually just another Material, which gets rendered/shaded (including texture), and then added on top of previous layer with an operation like Mix, Add, Mult, etc. - Layers render fully independent, so bumpmaps are not passed on to next layers. - Per Layer you can set if it influences Diffuse, Specular or Alpha - If a Material returns alpha (like from texture), the alpha value is used for adding the layers too. - New texture "Map To" channel allows to have a texture work on a Layer - Each layer, including basis Material, can be turned on/off individually Notes: - at this moment, the full shading pass happens for each layer, including shadow, AO and raytraced mirror or transparency... - I had to remove old hacks from preview render, which corrected reflected normals for preview texturing. - still needs loadsa testing!
2005-12-04 14:32:21 +00:00
/*
Initial revision
2002-10-12 11:37:38 +00:00
* $Id$
*
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-16 22:40:48 +00:00
* ***** BEGIN GPL LICENSE BLOCK *****
Initial revision
2002-10-12 11:37:38 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-16 22:40:48 +00:00
* of the License, or (at your option) any later version.
Initial revision
2002-10-12 11:37:38 +00:00
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* The Original Code is: all of this file.
*
* Contributor(s): none yet.
*
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-16 22:40:48 +00:00
* ***** END GPL LICENSE BLOCK *****
Initial revision
2002-10-12 11:37:38 +00:00
*/
/* global includes */
#include <stdlib.h>
#include <math.h>
NEW: Ramp shades for diffuse and specular http://www.blender3d.org/cms/Ramp_Shaders.348.0.html Material color and specular now can be defined by a Colorband. The actual color then is defined during shading based on: - shade value (like dotproduct) - energy value (dot product plus light) - normal - result of all shading (useful for adding stuff in the end) Special request from [A]ndy! :)
2004-06-30 18:54:09 +00:00
#include <string.h>
Initial revision
2002-10-12 11:37:38 +00:00
updated .c files to include: #ifdef HAVE_CONFIG_H #include <config.h> #endif Just need to finish cpp files now :) Kent -- mein@cs.umn.edu
2002-11-25 12:02:15 +00:00
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
Initial revision
2002-10-12 11:37:38 +00:00
#ifndef WIN32
#include <unistd.h>
#else
#include <io.h>
#endif
#include "MEM_guardedalloc.h"
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
#include "BLI_arithb.h"
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
#include "BLI_blenlib.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "MTC_matrixops.h"
#include "DNA_texture_types.h"
#include "DNA_world_types.h"
#include "DNA_camera_types.h"
#include "DNA_image_types.h"
Biiig commit! Thanks to 2-3 weeks of cvs freeze... Render: - New; support for dual CPU render (SDL thread) Currently only works with alternating scanlines, but gives excellent performance. For both normal render as unified implemented. Note the "mutex" locks on z-transp buffer render and imbuf loads. - This has been made possible by major cleanups in render code, especially getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct OSA or using Materials or Texture data to write to. - Made normal render fully 4x32 floats too, and removed all old optimizes with chars or shorts. - Made normal render and unified render use same code for sky and halo render, giving equal (and better) results for halo render. Old render now also uses PostProcess options (brightness, mul, gamma) - Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer after render. Using PostProcess menu you will note an immediate re- display of image too (32 bits RGBA) - Added "Hue" and "Saturation" sliders to PostProcess options - Render module is still not having a "nice" API, but amount of dependencies went down a lot. Next todo: remove abusive "previewrender" code. The last main global in Render (struct Render) now can be re-used for fully controlling a render, to allow multiple "instances" of render to open. - Renderwindow now displays a smal bar on top with the stats, and keeps the stats after render too. Including "spare" page support. Not only easier visible that way, but also to remove the awkward code that was drawing stats in the Info header (extreme slow on some ATIs too) - Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping defines. - I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
#include "DNA_material_types.h"
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
#include "DNA_node_types.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "DNA_object_types.h"
#include "DNA_lamp_types.h"
#include "DNA_space_types.h"
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
#include "DNA_view3d_types.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "DNA_scene_types.h"
#include "DNA_screen_types.h"
Bugfix #4625 Using the 3d window preview render, fluidsim objects gave drawing errors. Was caused by missing object recalc signals after creating the render database (happens on different resolutions for fluidsim). Note to self: the separation between 'render' and 'display' is still a weak part in the Derived/Displist code...
2006-07-06 10:10:41 +00:00
#include "BKE_depsgraph.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BKE_global.h"
#include "BKE_image.h"
Orange: Warning cleanup for Icons commit, missing declarations of some calls caused icon hashing not to work too. Runs smooth here :)
2005-12-21 23:39:20 +00:00
#include "BKE_icons.h"
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
#include "BKE_library.h"
#include "BKE_main.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BKE_texture.h"
#include "BKE_material.h"
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
#include "BKE_node.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BKE_world.h"
#include "BKE_texture.h"
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
#include "BKE_utildefines.h"
Initial revision
2002-10-12 11:37:38 +00:00
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
#include "IMB_imbuf.h"
#include "IMB_imbuf_types.h"
- last minute crash, reported by aphex' testing: when removing header from buttons window, the previewrender didnt show or crashes. was caused by relying to an evil global pointer 'lockpoin' which was only set in headerbuttons...
2003-11-27 23:41:54 +00:00
#include "BSE_headerbuttons.h"
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
#include "BSE_node.h"
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
#include "BSE_view.h"
- last minute crash, reported by aphex' testing: when removing header from buttons window, the previewrender didnt show or crashes. was caused by relying to an evil global pointer 'lockpoin' which was only set in headerbuttons...
2003-11-27 23:41:54 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
#include "BIF_gl.h"
#include "BIF_screen.h"
#include "BIF_space.h" /* allqueue */
Another huge commit!!! First, check on the new files, which are listed below. The new butspace.h is a local include, only to be used for the buttons drawn in the buttonswindow. - editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now - i quite completely reorganized it, it's now nicely telling you what context it is in - sorting error in panel align fixed (tabs were flipping) - align works correctly automatic when you click around in Blender - editsca.c renamed to buttons_logic.h - button names are truncated from the right for allmost all buttons (except text buttons and number buttons) - while dragging panels, you cannot move them outside window anymore And of course fixed loads of little bugs I encountered while testing it all. This is a version I really need good test & feedback for. Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
#include "BIF_butspace.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BIF_mywindow.h"
- added method to have a preview render in panel - increased size of preview from 100 to 125 pix :) - put back header buttons for databrowse, but they need to move to buttonswindow itself
2003-10-11 00:21:05 +00:00
#include "BIF_interface.h"
Bug #1141 When choosing 'International fonts' this variable was not reset when loading .B.blend again with CTRL+X. Move the check for this to read_homefile() instead of init() call.
2004-04-09 13:51:48 +00:00
#include "BIF_glutil.h"
big warning hunt commit lot of casts, added prototypes, missing includes and some true errors
2005-03-09 19:45:59 +00:00
#include "BIF_previewrender.h" /* include ourself for prototypes */
WARNING: with makefiles I could not get a stable blender compiled. do a make clean in source/blender/ to be sure! - Included the new shaders from Cessen... well, only the shader calls themselves. To make sure the shaders work I nicely integrated it - MaterialButtons: layout changed a bit, but still resembles the old layout. The 'shader' options now are located together. - Shaders are separated in 'diffuse' and 'specular'. You can combine them freely. - diffuse Lambert: old shader diffuse Oren Nayar: new shader, gives sandy/silky/skinny material well diffuse Toon: for cartoon render - specular Phong: new spec, traditional 70ies spec specular CookTorr: a reduced version of cook torrance shading, does off specular peak well specular Blinn: new spec, same features as CookTorr, but with extra 'refraction' setting specular Toon: new spec for cartoon render - default blender starts with settings that render compatible! - works in shaded view and preview-render - works in unified render Further little changes: - removed paranoia compile warnings from render/loader/blenlib - and the warnings at files I worked at were removed.
2003-07-19 20:31:29 +00:00
#include "PIL_time.h"
Initial revision
2002-10-12 11:37:38 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
#include "RE_pipeline.h"
#include "BLO_readfile.h"
Initial revision
2002-10-12 11:37:38 +00:00
Merge of first part of changes from the apricot branch, especially the features that are needed to run the game. Compile tested with scons, make, but not cmake, that seems to have an issue not related to these changes. The changes include: * GLSL support in the viewport and game engine, enable in the game menu in textured draw mode. * Synced and merged part of the duplicated blender and gameengine/ gameplayer drawing code. * Further refactoring of game engine drawing code, especially mesh storage changed a lot. * Optimizations in game engine armatures to avoid recomputations. * A python function to get the framerate estimate in game. * An option take object color into account in materials. * An option to restrict shadow casters to a lamp's layers. * Increase from 10 to 18 texture slots for materials, lamps, word. An extra texture slot shows up once the last slot is used. * Memory limit for undo, not enabled by default yet because it needs the .B.blend to be changed. * Multiple undo for image painting. * An offset for dupligroups, so not all objects in a group have to be at the origin.
2008-09-04 20:51:28 +00:00
#include "GPU_material.h"
Turned Sky render code in Blender to become fully float, it still returned bytes for RGB. This to allow very bright contrasted images to be used for AO as well. As a first start also the Texture->Colors panel now allows contrast setting up to 5.0 (was 2.0).
2004-04-24 20:27:29 +00:00
#include "blendef.h" /* CLAMP */
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
#include "interface.h" /* ui_graphics_to_window(), SOLVE! (ton) */
#include "mydevice.h"
Turned Sky render code in Blender to become fully float, it still returned bytes for RGB. This to allow very bright contrasted images to be used for AO as well. As a first start also the Texture->Colors panel now allows contrast setting up to 5.0 (was 2.0).
2004-04-24 20:27:29 +00:00
- two more panels for material buttons. work in progress....
2003-10-11 14:12:14 +00:00
#define PR_XMIN 10
- added method to have a preview render in panel - increased size of preview from 100 to 125 pix :) - put back header buttons for databrowse, but they need to move to buttonswindow itself
2003-10-11 00:21:05 +00:00
#define PR_YMIN 5
- two more panels for material buttons. work in progress....
2003-10-11 14:12:14 +00:00
#define PR_XMAX 200
#define PR_YMAX 195
Initial revision
2002-10-12 11:37:38 +00:00
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
Feature: - Appending Images now re-assigns relative paths, to match with the file as currently being used Bugfix: - Memory error in creating preview render rects... gave no issues here, but i guess that's not saying anything! Hope its more stable now. :)
2006-02-09 19:47:53 +00:00
static void set_previewrect(RenderInfo *ri, int win)
Initial revision
2002-10-12 11:37:38 +00:00
{
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
rctf viewplane;
Should have done ages ago! This commit replaces the glDrawPixels and rectwrite_part with the very nice (thanks zr!) glaDrawPixelsSafe() call. Result is: - 3d window background image displays correctly onto the edges when zoomed in extreme - same for UV image window and sequence preview - preview render now doesnt disappear when left part is outside window (zr also deserves kick in butt for not doing this himself in NaN days!) Especially from preview drawing quite some old hacks were deleted. It is even quite some faster. Please notify me when it doesnt work on your card... this now is just 100% according opengl guidelines though :) Also fixes bug #2100
2005-01-07 21:48:25 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
BLI_init_rctf(&viewplane, PR_XMIN, PR_XMAX, PR_YMIN, PR_YMAX);
Initial revision
2002-10-12 11:37:38 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
ui_graphics_to_window_rct(win, &viewplane, &ri->disprect);
Initial revision
2002-10-12 11:37:38 +00:00
Should have done ages ago! This commit replaces the glDrawPixels and rectwrite_part with the very nice (thanks zr!) glaDrawPixelsSafe() call. Result is: - 3d window background image displays correctly onto the edges when zoomed in extreme - same for UV image window and sequence preview - preview render now doesnt disappear when left part is outside window (zr also deserves kick in butt for not doing this himself in NaN days!) Especially from preview drawing quite some old hacks were deleted. It is even quite some faster. Please notify me when it doesnt work on your card... this now is just 100% according opengl guidelines though :) Also fixes bug #2100
2005-01-07 21:48:25 +00:00
/* correction for gla draw */
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
BLI_translate_rcti(&ri->disprect, -curarea->winrct.xmin, -curarea->winrct.ymin);
Initial revision
2002-10-12 11:37:38 +00:00
Should have done ages ago! This commit replaces the glDrawPixels and rectwrite_part with the very nice (thanks zr!) glaDrawPixelsSafe() call. Result is: - 3d window background image displays correctly onto the edges when zoomed in extreme - same for UV image window and sequence preview - preview render now doesnt disappear when left part is outside window (zr also deserves kick in butt for not doing this himself in NaN days!) Especially from preview drawing quite some old hacks were deleted. It is even quite some faster. Please notify me when it doesnt work on your card... this now is just 100% according opengl guidelines though :) Also fixes bug #2100
2005-01-07 21:48:25 +00:00
glMatrixMode(GL_PROJECTION);
glPushMatrix();
glMatrixMode(GL_MODELVIEW);
glPushMatrix();
glaDefine2DArea(&curarea->winrct);
Initial revision
2002-10-12 11:37:38 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
ri->pr_rectx= (ri->disprect.xmax-ri->disprect.xmin);
ri->pr_recty= (ri->disprect.ymax-ri->disprect.ymin);
Should have done ages ago! This commit replaces the glDrawPixels and rectwrite_part with the very nice (thanks zr!) glaDrawPixelsSafe() call. Result is: - 3d window background image displays correctly onto the edges when zoomed in extreme - same for UV image window and sequence preview - preview render now doesnt disappear when left part is outside window (zr also deserves kick in butt for not doing this himself in NaN days!) Especially from preview drawing quite some old hacks were deleted. It is even quite some faster. Please notify me when it doesnt work on your card... this now is just 100% according opengl guidelines though :) Also fixes bug #2100
2005-01-07 21:48:25 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
static void end_previewrect(void)
Should have done ages ago! This commit replaces the glDrawPixels and rectwrite_part with the very nice (thanks zr!) glaDrawPixelsSafe() call. Result is: - 3d window background image displays correctly onto the edges when zoomed in extreme - same for UV image window and sequence preview - preview render now doesnt disappear when left part is outside window (zr also deserves kick in butt for not doing this himself in NaN days!) Especially from preview drawing quite some old hacks were deleted. It is even quite some faster. Please notify me when it doesnt work on your card... this now is just 100% according opengl guidelines though :) Also fixes bug #2100
2005-01-07 21:48:25 +00:00
{
glMatrixMode(GL_PROJECTION);
glPopMatrix();
glMatrixMode(GL_MODELVIEW);
glPopMatrix();
Bug fix #2220 Another fix related to improved preview drawing (shade context buttons), it didn't update glViewPort and glScissor correctly, causing the buttons next to the preview-rect not to be offset win the window matrix anymore.
2005-02-08 16:31:39 +00:00
// restore viewport / scissor which was set by glaDefine2DArea
glViewport(curarea->winrct.xmin, curarea->winrct.ymin, curarea->winx, curarea->winy);
glScissor(curarea->winrct.xmin, curarea->winrct.ymin, curarea->winx, curarea->winy);
Bug fix (from own collection) After using clip-safe pixeldraw from glutil.c (preview render, bg picture) the current viewport had to be re-set. Not doing so caused a 1 pixel offset for live updates buttons (on mouse over)
2005-01-30 13:13:31 +00:00
Should have done ages ago! This commit replaces the glDrawPixels and rectwrite_part with the very nice (thanks zr!) glaDrawPixelsSafe() call. Result is: - 3d window background image displays correctly onto the edges when zoomed in extreme - same for UV image window and sequence preview - preview render now doesnt disappear when left part is outside window (zr also deserves kick in butt for not doing this himself in NaN days!) Especially from preview drawing quite some old hacks were deleted. It is even quite some faster. Please notify me when it doesnt work on your card... this now is just 100% according opengl guidelines though :) Also fixes bug #2100
2005-01-07 21:48:25 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* unused now */
void draw_tex_crop(Tex *tex)
Initial revision
2002-10-12 11:37:38 +00:00
{
rcti rct;
int ret= 0;
if(tex==0) return;
if(tex->type==TEX_IMAGE) {
Orange branch feature; Material Layering (WIP, don't bugs for this in tracker yet please!) - New Panel "Layers" in Material buttons, allows to add unlimited amount of materials on top of each other. - Every Layer is actually just another Material, which gets rendered/shaded (including texture), and then added on top of previous layer with an operation like Mix, Add, Mult, etc. - Layers render fully independent, so bumpmaps are not passed on to next layers. - Per Layer you can set if it influences Diffuse, Specular or Alpha - If a Material returns alpha (like from texture), the alpha value is used for adding the layers too. - New texture "Map To" channel allows to have a texture work on a Layer - Each layer, including basis Material, can be turned on/off individually Notes: - at this moment, the full shading pass happens for each layer, including shadow, AO and raytraced mirror or transparency... - I had to remove old hacks from preview render, which corrected reflected normals for preview texturing. - still needs loadsa testing!
2005-12-04 14:32:21 +00:00
if(tex->cropxmin==0.0f) ret++;
if(tex->cropymin==0.0f) ret++;
if(tex->cropxmax==1.0f) ret++;
if(tex->cropymax==1.0f) ret++;
Initial revision
2002-10-12 11:37:38 +00:00
if(ret==4) return;
rct.xmin= PR_XMIN+2+tex->cropxmin*(PR_XMAX-PR_XMIN-4);
rct.xmax= PR_XMIN+2+tex->cropxmax*(PR_XMAX-PR_XMIN-4);
rct.ymin= PR_YMIN+2+tex->cropymin*(PR_YMAX-PR_YMIN-4);
rct.ymax= PR_YMIN+2+tex->cropymax*(PR_YMAX-PR_YMIN-4);
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
glColor3ub(0, 0, 0);
glRecti(rct.xmin+1, rct.ymin-1, rct.xmax+1, rct.ymax-1);
glColor3ub(255, 255, 255);
glRecti(rct.xmin, rct.ymin, rct.xmax, rct.ymax);
glPolygonMode(GL_FRONT_AND_BACK, GL_FILL);
}
}
Orange: daily noodle updates; - Texture Node: now displays 'intensity values' in node too, and has input, and shows in buttons when activated in Node editor. (no browsing buttons yet...) - New: "Normal Node". This uses a new UI button, which allows to quickly input a normal vector, based on spherical coordinates. The Normal Node has optional vector input, and delivers a dot product then. This can be used as a blending factor between nodes, or for fake extra light in a certain direction. - New: "Geometry Node". This actually replaces the Input node. It offers all coordinates (vectors) as being the starting point for shading and for textures. Note: for preview render this doesn't give much different results yet... this is the start for real render support! - http://www.blender.org/bf/rt5.jpg The two new nodes in action - Bugfix: the "Block" button (which delivers popups) did not return a correct event when nothing happened (mouse moved out), which could cause mouse clicks to be passed on to the queue.
2005-12-30 11:25:15 +00:00
/* temporal abuse; if id_code is -1 it only does texture.... solve! */
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
void BIF_preview_changed(short id_code)
- added Panel for 'anim playback settings' - removed draw rect from avi coded settings (should become label but) - changing texture settings, now also updates lamp/material/world preview when thats open
2003-10-23 16:52:54 +00:00
{
ScrArea *sa;
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
for(sa= G.curscreen->areabase.first; sa; sa= sa->next) {
- added Panel for 'anim playback settings' - removed draw rect from avi coded settings (should become label but) - changing texture settings, now also updates lamp/material/world preview when thats open
2003-10-23 16:52:54 +00:00
if(sa->spacetype==SPACE_BUTS) {
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
SpaceButs *sbuts= sa->spacedata.first;
if(sbuts->mainb==CONTEXT_SHADING) {
int tab= sbuts->tab[CONTEXT_SHADING];
if(tab==TAB_SHADING_MAT && (id_code==ID_MA || id_code==ID_TE)) {
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if (sbuts->ri) sbuts->ri->curtile= 0;
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
addafterqueue(sa->win, RENDERPREVIEW, 1);
}
Orange: daily noodle updates; - Texture Node: now displays 'intensity values' in node too, and has input, and shows in buttons when activated in Node editor. (no browsing buttons yet...) - New: "Normal Node". This uses a new UI button, which allows to quickly input a normal vector, based on spherical coordinates. The Normal Node has optional vector input, and delivers a dot product then. This can be used as a blending factor between nodes, or for fake extra light in a certain direction. - New: "Geometry Node". This actually replaces the Input node. It offers all coordinates (vectors) as being the starting point for shading and for textures. Note: for preview render this doesn't give much different results yet... this is the start for real render support! - http://www.blender.org/bf/rt5.jpg The two new nodes in action - Bugfix: the "Block" button (which delivers popups) did not return a correct event when nothing happened (mouse moved out), which could cause mouse clicks to be passed on to the queue.
2005-12-30 11:25:15 +00:00
else if(tab==TAB_SHADING_TEX && (id_code==ID_TE || id_code==-1)) {
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if (sbuts->ri) sbuts->ri->curtile= 0;
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
addafterqueue(sa->win, RENDERPREVIEW, 1);
}
else if(tab==TAB_SHADING_LAMP && (id_code==ID_LA || id_code==ID_TE)) {
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if (sbuts->ri) sbuts->ri->curtile= 0;
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
addafterqueue(sa->win, RENDERPREVIEW, 1);
Small improvement in detecting which previews need update in Blender. Now you can have multiple buttons windows open, for example one showing only a larger material preview, and have it updated correctly. Nice for setups where you can keep preview shown while scrolling buttons.
2004-07-10 19:56:27 +00:00
}
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
else if(tab==TAB_SHADING_WORLD && (id_code==ID_WO || id_code==ID_TE)) {
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if (sbuts->ri) sbuts->ri->curtile= 0;
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
addafterqueue(sa->win, RENDERPREVIEW, 1);
}
}
Bugfix #5827 Preview render in buttons was not refreshed when changes in a material happened, without preview visible. (like editbuttons, active mat index). Now on re-entering material buttons, a re-render happens in these cases.
2007-01-26 15:34:32 +00:00
else if (sbuts->ri)
sbuts->ri->curtile= 0; /* ensure changes always result in re-render when context is restored */
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
}
else if(sa->spacetype==SPACE_NODE) {
SpaceNode *snode= sa->spacedata.first;
if(snode->treetype==NTREE_SHADER && (id_code==ID_MA || id_code==ID_TE)) {
snode_tag_dirty(snode);
Small improvement in detecting which previews need update in Blender. Now you can have multiple buttons windows open, for example one showing only a larger material preview, and have it updated correctly. Nice for setups where you can keep preview shown while scrolling buttons.
2004-07-10 19:56:27 +00:00
}
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
else if(sa->spacetype==SPACE_VIEW3D) {
View3D *vd= sa->spacedata.first;
/* if is has a renderinfo, we consider that reason for signalling */
if (vd->ri) {
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
vd->ri->curtile= 0;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
addafterqueue(sa->win, RENDERPREVIEW, 1);
Initial revision
2002-10-12 11:37:38 +00:00
}
}
}
Merge of first part of changes from the apricot branch, especially the features that are needed to run the game. Compile tested with scons, make, but not cmake, that seems to have an issue not related to these changes. The changes include: * GLSL support in the viewport and game engine, enable in the game menu in textured draw mode. * Synced and merged part of the duplicated blender and gameengine/ gameplayer drawing code. * Further refactoring of game engine drawing code, especially mesh storage changed a lot. * Optimizations in game engine armatures to avoid recomputations. * A python function to get the framerate estimate in game. * An option take object color into account in materials. * An option to restrict shadow casters to a lamp's layers. * Increase from 10 to 18 texture slots for materials, lamps, word. An extra texture slot shows up once the last slot is used. * Memory limit for undo, not enabled by default yet because it needs the .B.blend to be changed. * Multiple undo for image painting. * An offset for dupligroups, so not all objects in a group have to be at the origin.
2008-09-04 20:51:28 +00:00
if(ELEM4(id_code, ID_MA, ID_TE, ID_LA, ID_WO)) {
Object *ob;
Material *ma;
if(id_code == ID_WO) {
for(ma=G.main->mat.first; ma; ma=ma->id.next) {
if(ma->gpumaterial.first) {
GPU_material_free(ma);
allqueue(REDRAWVIEW3D, 0);
}
}
}
else if(id_code == ID_LA) {
for(ob=G.main->object.first; ob; ob=ob->id.next) {
if(ob->gpulamp.first) {
GPU_lamp_free(ob);
allqueue(REDRAWVIEW3D, 0);
}
}
} else if(OBACT) {
Object *ob = OBACT;
ma= give_current_material(ob, ob->actcol);
if(ma && ma->gpumaterial.first) {
GPU_material_free(ma);
allqueue(REDRAWVIEW3D, 0);
}
}
}
Initial revision
2002-10-12 11:37:38 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* *************************** Preview for buttons *********************** */
Initial revision
2002-10-12 11:37:38 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
static Main *pr_main= NULL;
Initial revision
2002-10-12 11:37:38 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
void BIF_preview_init_dbase(void)
Initial revision
2002-10-12 11:37:38 +00:00
{
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
BlendReadError bre;
BlendFileData *bfd;
extern int datatoc_preview_blend_size;
extern char datatoc_preview_blend[];
Initial revision
2002-10-12 11:37:38 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
G.fileflags |= G_FILE_NO_UI;
bfd= BLO_read_from_memory(datatoc_preview_blend, datatoc_preview_blend_size, &bre);
if (bfd) {
pr_main= bfd->main;
Initial revision
2002-10-12 11:37:38 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
MEM_freeN(bfd);
Initial revision
2002-10-12 11:37:38 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
G.fileflags &= ~G_FILE_NO_UI;
Initial revision
2002-10-12 11:37:38 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
void BIF_preview_free_dbase(void)
Initial revision
2002-10-12 11:37:38 +00:00
{
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
if(pr_main)
free_main(pr_main);
Initial revision
2002-10-12 11:37:38 +00:00
}
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
/* call this with an ID pointer to initialize preview scene */
/* call this with ID NULL to restore assigned ID pointers in preview scene */
static Scene *preview_prepare_scene(RenderInfo *ri, int id_type, ID *id, int pr_method)
Initial revision
2002-10-12 11:37:38 +00:00
{
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
Scene *sce;
Base *base;
Biiig commit! Thanks to 2-3 weeks of cvs freeze... Render: - New; support for dual CPU render (SDL thread) Currently only works with alternating scanlines, but gives excellent performance. For both normal render as unified implemented. Note the "mutex" locks on z-transp buffer render and imbuf loads. - This has been made possible by major cleanups in render code, especially getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct OSA or using Materials or Texture data to write to. - Made normal render fully 4x32 floats too, and removed all old optimizes with chars or shorts. - Made normal render and unified render use same code for sky and halo render, giving equal (and better) results for halo render. Old render now also uses PostProcess options (brightness, mul, gamma) - Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer after render. Using PostProcess menu you will note an immediate re- display of image too (32 bits RGBA) - Added "Hue" and "Saturation" sliders to PostProcess options - Render module is still not having a "nice" API, but amount of dependencies went down a lot. Next todo: remove abusive "previewrender" code. The last main global in Render (struct Render) now can be re-used for fully controlling a render, to allow multiple "instances" of render to open. - Renderwindow now displays a smal bar on top with the stats, and keeps the stats after render too. Including "spare" page support. Not only easier visible that way, but also to remove the awkward code that was drawing stats in the Info header (extreme slow on some ATIs too) - Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping defines. - I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
if(pr_main==NULL) return NULL;
sce= pr_main->scene.first;
if(sce) {
- Preview render (buttons) was executing the 'data ipos', causing inserting keys with IKEY in buttons to not work. - Crash in opengl while rendering was caused by the fact that scanline updates are drawn in the main thread, whilst the actual render thread then can already be doing different stuff. Especially with many layers & passes it's getting confusing easily :) Convention now is that scanline render updates only happen while the thread is looping over scanlines. As soon as it reached the last, no drawing happens, not even to update the last segment. This isnt a problen, since any finished tile is drawn again entirely.
2006-02-15 09:35:01 +00:00
/* this flag tells render to not execute depsgraph or ipos etc */
sce->r.scemode |= R_PREVIEWBUTS;
Fixes for preview render in buttons: - restored type choice compatiblity (plane, sphere, cube) with 2.41 release (sorry, will break saved files with CVS... my fault, should have known.) - removed lamp choices (lights now are different per preview, no fixed choices). - added checkered plane behind the plane preview. nicer for halos.
2006-06-14 18:04:26 +00:00
/* set world always back, is used now */
sce->world= pr_main->world.first;
Feature: we're using "non linear lighting" now, using exposure/range in world. That allows more extreme lamps (areas too). To make it work more intuitive, the preview renders in buttons now use the settings for exposure too.
2008-01-25 15:06:35 +00:00
/* now: exposure copy */
if(G.scene->world) {
sce->world->exp= G.scene->world->exp;
sce->world->range= G.scene->world->range;
}
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
The Big Image refactor! Please read: http://www.blender3d.org/cms/Imaging.834.0.html Or in short: - adding MultiLayer Image support - recoded entire Image API - better integration of movie/sequence Images Was a whole load of work... went down for a week to do this. So, will need a lot of testing! Will be in irc all evening.
2006-12-20 17:57:56 +00:00
sce->r.cfra= G.scene->r.cfra;
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
if(id_type==ID_MA) {
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
Material *mat= (Material *)id;
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
if(id) {
More preview fixes, after irc reports: - Ztransp looked weird in Node previews, only showing the backfacing pixels - previous change in preview.blend accidentally set camera clipping too low for correct display of lamp preview - refresh issue solved in preview when using Node shaders with ray-mirror
2006-06-20 14:32:42 +00:00
init_render_material(mat, 0, NULL); /* call that retrieves mode_l */
end_render_material(mat);
* preview.blend fixes The preview.blend now shows raytracing/transparency, and also turns on and off the fake shadow based on the 'shadbuf' setting. Also included an updated preview.blend file to accomodate this.
2006-06-09 15:55:27 +00:00
/* turn on raytracing if needed */
More preview fixes, after irc reports: - Ztransp looked weird in Node previews, only showing the backfacing pixels - previous change in preview.blend accidentally set camera clipping too low for correct display of lamp preview - refresh issue solved in preview when using Node shaders with ray-mirror
2006-06-20 14:32:42 +00:00
if(mat->mode_l & (MA_RAYTRANSP|MA_RAYMIRROR))
* preview.blend fixes The preview.blend now shows raytracing/transparency, and also turns on and off the fake shadow based on the 'shadbuf' setting. Also included an updated preview.blend file to accomodate this.
2006-06-09 15:55:27 +00:00
sce->r.mode |= R_RAYTRACE;
Disable SSS better for preview rendering, so it does not slow down other preview renders at all. Also added a flag to enable/disable SSS per scene. There is no button for it yet, the Render panel has no space left .. will find a place for it later. The subversion number was also increased to enable the flag for older .blends.
2007-05-17 16:51:09 +00:00
if(mat->sss_flag & MA_DIFF_SSS)
sce->r.mode |= R_SSS;
* preview.blend fixes The preview.blend now shows raytracing/transparency, and also turns on and off the fake shadow based on the 'shadbuf' setting. Also included an updated preview.blend file to accomodate this.
2006-06-09 15:55:27 +00:00
/* turn off fake shadows if needed */
/* this only works in a specific case where the preview.blend contains
* an object starting with 'c' which has a material linked to it (not the obdata)
* and that material has a fake shadow texture in the active texture slot */
for(base= sce->base.first; base; base= base->next) {
if(base->object->id.name[2]=='c') {
Material *shadmat= give_current_material(base->object, base->object->actcol);
if(shadmat) {
if (mat->mode & MA_SHADBUF) shadmat->septex = 0;
else shadmat->septex |= 1;
}
}
}
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
if(pr_method==PR_ICON_RENDER) {
=== preview icons === - changed preview type of halo materials - halo materials are also shown with alpha=255 like in preview window
2006-06-15 11:23:51 +00:00
if (mat->mode & MA_HALO) {
sce->lay= 1<<MA_FLAT;
}
else {
sce->lay= 1<<MA_SPHERE_A;
}
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
}
else {
sce->lay= 1<<mat->pr_type;
if(mat->nodetree)
ntreeInitPreview(mat->nodetree, ri->pr_rectx, ri->pr_recty);
}
Preview render fixes: - previous preview.blend rendered OSA, is too slow, especially for raytrace. now made it an extra option for buttons preview. (icons render without). - made monkey one level subsurf lower for speed - in previewblend, made the tiled cube environment entirely closed, so a mirror reflection will show nicer.
2006-06-20 09:31:54 +00:00
}
else {
Disable SSS better for preview rendering, so it does not slow down other preview renders at all. Also added a flag to enable/disable SSS per scene. There is no button for it yet, the Render panel has no space left .. will find a place for it later. The subversion number was also increased to enable the flag for older .blends.
2007-05-17 16:51:09 +00:00
sce->r.mode &= ~(R_OSA|R_RAYTRACE|R_SSS);
Preview render fixes: - previous preview.blend rendered OSA, is too slow, especially for raytrace. now made it an extra option for buttons preview. (icons render without). - made monkey one level subsurf lower for speed - in previewblend, made the tiled cube environment entirely closed, so a mirror reflection will show nicer.
2006-06-20 09:31:54 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
for(base= sce->base.first; base; base= base->next) {
if(base->object->id.name[2]=='p') {
if(ELEM4(base->object->type, OB_MESH, OB_CURVE, OB_SURF, OB_MBALL))
assign_material(base->object, mat, base->object->actcol);
}
}
Initial revision
2002-10-12 11:37:38 +00:00
}
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
else if(id_type==ID_TE) {
Tex *tex= (Tex *)id;
sce->lay= 1<<MA_TEXTURE;
for(base= sce->base.first; base; base= base->next) {
if(base->object->id.name[2]=='t') {
Material *mat= give_current_material(base->object, base->object->actcol);
if(mat && mat->mtex[0]) {
mat->mtex[0]->tex= tex;
Texture button preview: - now draws intensity value correct (black/white was inversed) - added option to show texture alpha too
2006-04-01 14:08:57 +00:00
/* show alpha in this case */
if(tex==NULL || (tex->flag & TEX_PRV_ALPHA)) {
mat->mtex[0]->mapto |= MAP_ALPHA;
mat->alpha= 0.0f;
}
else {
mat->mtex[0]->mapto &= ~MAP_ALPHA;
mat->alpha= 1.0f;
}
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
}
}
}
}
else if(id_type==ID_LA) {
Lamp *la= (Lamp *)id;
sce->lay= 1<<MA_LAMP;
iImage based Vector Blur After a couple of experiments with variable blur filters, I tried a more interesting, and who knows... original approach. :) First watch results here: http://www.blender.org/bf/rt0001_0030.avi http://www.blender.org/bf/hand0001_0060.avi These are the steps in producing such results: - In preprocess, the speed vectors to previous and next frame are calculated. Speed vectors are screen-aligned and in pixel size. - while rendering, these vectors get calculated per sample, and accumulated in the vector buffer checking for "minimum speed". (on start the vector buffer is initialized on max speed). - After render: - The entire image, all pixels, then is converted to quad polygons. - Also the z value of the pixels is assigned to the polygons - The vertices for the quads use averaged speed vectors (of the 4 corner faces), using a 'minimum but non-zero' speed rule. This minimal speed trick works very well to prevent 'tearing' apart when multiple faces move in different directions in a pixel, or to be able to separate moving pixels clearly from non-moving ones - So, now we have a sort of 'mask' of quad polygons. The previous steps guaranteed that this mask doesn't have antialias color info, and has speed vectors that ensure individual parts to move nicely without tearing effects. The Z allows multiple layers of moving masks. - Then, in temporal buffer, faces get tagged if they move or not - These tags then go to an anti-alias routine, which assigns alpha values to edge faces, based on the method we used in past to antialias bitmaps (still in our code, check the antialias.c in imbuf!) - finally, the tag buffer is used to tag which z values of the original image have to be included (to allow blur go behind stuff). - OK, now we're ready for accumulating! In a loop, all faces then get drawn (with zbuffer) with increasing influence of their speed vectors. The resulting image then is accumulated on top of the original with a decreasing weighting value. It sounds all quite complex... but the speed is still encouraging. Above images have 64 mblur steps, which takes about 1-3 seconds per frame. Usage notes: - Make sure the render-layer has passes 'Vector' and 'Z' on. - add in Compositor the VectorBlur node, and connect the image, Z and speed to the inputs. - The node allows to set amount of steps (10 steps = 10 forward, 10 back). and to set a maximum speed in pixels... to prevent extreme moving things to blur too wide.
2006-02-06 22:11:50 +00:00
sce->r.mode &= ~R_SHADOW;
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
for(base= sce->base.first; base; base= base->next) {
if(base->object->id.name[2]=='p') {
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
if(base->object->type==OB_LAMP)
base->object->data= la;
Orange; WIP commit for inclusion of "Tangent" vector in rendering. This first implementation only supports it for Meshes with UV maps, and only tangents in V direction. Tangent diffuse: http://www.blender.org/bf/0001_0080.avi Tangent spec, diffuse, and bump: http://www.blender.org/bf/20001_0080.avi NOTE: since UV coordinates are still very badly subsurfed, this won't work well for subsurf meshes... on the todo. On the todo; - generate tangents for meshes without UV (with some options) - use tangents from Curve/Surface - add the Ashkimin shader from tracker ----- Important bugfix; curves didn't render anymore since yesterday. :)
2005-12-09 15:14:32 +00:00
}
}
Initial revision
2002-10-12 11:37:38 +00:00
}
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
else if(id_type==ID_WO) {
sce->lay= 1<<MA_SKY;
sce->world= (World *)id;
}
return sce;
Orange: Node previews now draw standard backdrop to show alpha better.
2006-01-04 12:41:13 +00:00
}
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
return NULL;
Orange branch feature; Material Layering (WIP, don't bugs for this in tracker yet please!) - New Panel "Layers" in Material buttons, allows to add unlimited amount of materials on top of each other. - Every Layer is actually just another Material, which gets rendered/shaded (including texture), and then added on top of previous layer with an operation like Mix, Add, Mult, etc. - Layers render fully independent, so bumpmaps are not passed on to next layers. - Per Layer you can set if it influences Diffuse, Specular or Alpha - If a Material returns alpha (like from texture), the alpha value is used for adding the layers too. - New texture "Map To" channel allows to have a texture work on a Layer - Each layer, including basis Material, can be turned on/off individually Notes: - at this moment, the full shading pass happens for each layer, including shadow, AO and raytraced mirror or transparency... - I had to remove old hacks from preview render, which corrected reflected normals for preview texturing. - still needs loadsa testing!
2005-12-04 14:32:21 +00:00
}
Made the most critical variables in render pipeline "volatile", especially the ones that get changed within threads, to communicate with the main thread. (Part of the long quest to get threaded render safe, especially in Linux)
2006-02-24 10:20:31 +00:00
static void previewrender_progress(RenderResult *rr, volatile rcti *renrect)
Orange branch feature; Material Layering (WIP, don't bugs for this in tracker yet please!) - New Panel "Layers" in Material buttons, allows to add unlimited amount of materials on top of each other. - Every Layer is actually just another Material, which gets rendered/shaded (including texture), and then added on top of previous layer with an operation like Mix, Add, Mult, etc. - Layers render fully independent, so bumpmaps are not passed on to next layers. - Per Layer you can set if it influences Diffuse, Specular or Alpha - If a Material returns alpha (like from texture), the alpha value is used for adding the layers too. - New texture "Map To" channel allows to have a texture work on a Layer - Each layer, including basis Material, can be turned on/off individually Notes: - at this moment, the full shading pass happens for each layer, including shadow, AO and raytraced mirror or transparency... - I had to remove old hacks from preview render, which corrected reflected normals for preview texturing. - still needs loadsa testing!
2005-12-04 14:32:21 +00:00
{
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
RenderLayer *rl;
RenderInfo *ri= G.buts->ri;
float ofsx, ofsy;
Orange branch feature; Material Layering (WIP, don't bugs for this in tracker yet please!) - New Panel "Layers" in Material buttons, allows to add unlimited amount of materials on top of each other. - Every Layer is actually just another Material, which gets rendered/shaded (including texture), and then added on top of previous layer with an operation like Mix, Add, Mult, etc. - Layers render fully independent, so bumpmaps are not passed on to next layers. - Per Layer you can set if it influences Diffuse, Specular or Alpha - If a Material returns alpha (like from texture), the alpha value is used for adding the layers too. - New texture "Map To" channel allows to have a texture work on a Layer - Each layer, including basis Material, can be turned on/off individually Notes: - at this moment, the full shading pass happens for each layer, including shadow, AO and raytraced mirror or transparency... - I had to remove old hacks from preview render, which corrected reflected normals for preview texturing. - still needs loadsa testing!
2005-12-04 14:32:21 +00:00
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if(renrect) return;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
rl= rr->layers.first;
Orange branch feature; Material Layering (WIP, don't bugs for this in tracker yet please!) - New Panel "Layers" in Material buttons, allows to add unlimited amount of materials on top of each other. - Every Layer is actually just another Material, which gets rendered/shaded (including texture), and then added on top of previous layer with an operation like Mix, Add, Mult, etc. - Layers render fully independent, so bumpmaps are not passed on to next layers. - Per Layer you can set if it influences Diffuse, Specular or Alpha - If a Material returns alpha (like from texture), the alpha value is used for adding the layers too. - New texture "Map To" channel allows to have a texture work on a Layer - Each layer, including basis Material, can be turned on/off individually Notes: - at this moment, the full shading pass happens for each layer, including shadow, AO and raytraced mirror or transparency... - I had to remove old hacks from preview render, which corrected reflected normals for preview texturing. - still needs loadsa testing!
2005-12-04 14:32:21 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
ofsx= ri->disprect.xmin + rr->tilerect.xmin;
ofsy= ri->disprect.ymin + rr->tilerect.ymin;
Orange branch feature; Material Layering (WIP, don't bugs for this in tracker yet please!) - New Panel "Layers" in Material buttons, allows to add unlimited amount of materials on top of each other. - Every Layer is actually just another Material, which gets rendered/shaded (including texture), and then added on top of previous layer with an operation like Mix, Add, Mult, etc. - Layers render fully independent, so bumpmaps are not passed on to next layers. - Per Layer you can set if it influences Diffuse, Specular or Alpha - If a Material returns alpha (like from texture), the alpha value is used for adding the layers too. - New texture "Map To" channel allows to have a texture work on a Layer - Each layer, including basis Material, can be turned on/off individually Notes: - at this moment, the full shading pass happens for each layer, including shadow, AO and raytraced mirror or transparency... - I had to remove old hacks from preview render, which corrected reflected normals for preview texturing. - still needs loadsa testing!
2005-12-04 14:32:21 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
glDrawBuffer(GL_FRONT);
Found one more case for drawing GL_FLOAT in preview render system. Removed that for ATI issues too...
2006-06-25 10:11:53 +00:00
glaDrawPixelsSafe_to32(ofsx, ofsy, rr->rectx, rr->recty, rr->rectx, rl->rectf);
Siggraph show commit! - pending commit for OSX intel systems, with intel graphics. These now call an extra swapbuffers after glFlush(). Code is ifdeffed, and doesnt affect other systems. - show-off commit: option to have transparent nodes over the composite result. Only draws Image for active Viewer Node now, and image doesnt translate nor zoom (which isnt bad though). Set in themes the alpha color of "node backdrop" to make nodes transparent.
2006-07-31 19:23:42 +00:00
bglFlush();
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
glDrawBuffer(GL_BACK);
Initial revision
2002-10-12 11:37:38 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* called by interface_icons.c, or by BIF_previewrender_buts or by nodes... */
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
void BIF_previewrender(struct ID *id, struct RenderInfo *ri, struct ScrArea *area, int pr_method)
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
{
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
Render *re;
RenderStats *rstats;
Scene *sce;
Preview render fixes: - previous preview.blend rendered OSA, is too slow, especially for raytrace. now made it an extra option for buttons preview. (icons render without). - made monkey one level subsurf lower for speed - in previewblend, made the tiled cube environment entirely closed, so a mirror reflection will show nicer.
2006-06-20 09:31:54 +00:00
SpaceButs *sbuts= NULL;
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
int oldx= ri->pr_rectx, oldy= ri->pr_recty;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
char name [32];
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if(ri->tottile && ri->curtile>=ri->tottile) return;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* check for return with a new event */
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
if(pr_method!=PR_ICON_RENDER && qtest()) {
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
if(area)
addafterqueue(area->win, RENDERPREVIEW, 1);
Initial revision
2002-10-12 11:37:38 +00:00
return;
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* get the stuff from the builtin preview dbase */
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
sce= preview_prepare_scene(ri, GS(id->name), id, pr_method);
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
if(sce==NULL) return;
Another commit for raytracing, now with glass refraction & fresnel! Changelog: - enable refraction with button "Ray Transp" in Material buttons. - set "Angular Index" value for amount of refraction. - use the "Alpha" value to define transparency. - remember to set a higher "Depth" too... glass can bounce quite some more than expected. - for correct refraction, 3D models MUST have normals pointing in the right direction (consistently pointing outside). - refraction 'sees' the thickness of glass based on what you model. So make for realistic glass both sides of a surface. - I needed to do some rewriting for correct mirroring/refraction, especially to prevent specularity being blended away. Solved this with localizing shading results in the rendercore.c. Now specularity correctly is added, and reduces the 'mirror' value. - Localizing more parts of the render code is being planned. The old render heavily relies on struct Render and struct Osa to store globals. For scanline render no problem, but recursive raytracing dislikes that. - done test with gamma-corrected summation of colors during tracing, is commented out still. But this will give more balanced reflections. Now dark reflections that are reflected in a bright surface seem incorrect. - Introduced 'Fresnel' effect for Mirror and Transparency. This influences the amount of mirror/transparency based at viewing angle. Next to a new Fresnel slider, also a 'falloff' button has been added to define the way it spreads. - Fresnel also works for Ztransp rendering - created new Panel for Raytrace options I have to evaluate still where it all should be logically located. - material preview shows fake reflection and fake refraction as well.
2003-12-16 14:12:01 +00:00
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
/* set drawing conditions OK */
if(area) {
Preview render fixes: - previous preview.blend rendered OSA, is too slow, especially for raytrace. now made it an extra option for buttons preview. (icons render without). - made monkey one level subsurf lower for speed - in previewblend, made the tiled cube environment entirely closed, so a mirror reflection will show nicer.
2006-06-20 09:31:54 +00:00
sbuts= area->spacedata.first; /* needed for flag */
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
set_previewrect(ri, area->win); // uses UImat
/* because preview render size can differs */
if(ri->rect && (oldx!=ri->pr_rectx || oldy!=ri->pr_recty)) {
MEM_freeN(ri->rect);
ri->rect= NULL;
ri->curtile= 0;
}
Initial revision
2002-10-12 11:37:38 +00:00
}
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
sprintf(name, "ButsPreview %d", area?area->win:0);
re= RE_GetRender(name);
Fix #4358 Was on the todo as well; previews in Shader Nodes didn't get cleared on re-renders, noticable when you switch preview type (i.e. sphere -> cube).
2006-06-19 17:29:44 +00:00
/* full refreshed render from first tile */
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if(re==NULL || ri->curtile==0) {
re= RE_NewRender(name);
/* handle cases */
if(pr_method==PR_DRAW_RENDER) {
RE_display_draw_cb(re, previewrender_progress);
RE_test_break_cb(re, qtest);
sce->r.scemode |= R_NODE_PREVIEW;
Preview render fixes: - previous preview.blend rendered OSA, is too slow, especially for raytrace. now made it an extra option for buttons preview. (icons render without). - made monkey one level subsurf lower for speed - in previewblend, made the tiled cube environment entirely closed, so a mirror reflection will show nicer.
2006-06-20 09:31:54 +00:00
if(sbuts->flag & SB_PRV_OSA)
sce->r.mode |= R_OSA;
Bugfix #4557 Report noted the slow icon renders for menus, which indeed is an issue, especially when texture images need to be loaded (not to mention that will eat up loads of memory). Added a flag in scene to disable loading of images, makes it 50 times faster, at least :)
2006-07-02 18:26:20 +00:00
sce->r.scemode &= ~R_NO_IMAGE_LOAD;
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
}
else if(pr_method==PR_DO_RENDER) {
RE_test_break_cb(re, qtest);
sce->r.scemode |= R_NODE_PREVIEW;
Bugfix #4557 Report noted the slow icon renders for menus, which indeed is an issue, especially when texture images need to be loaded (not to mention that will eat up loads of memory). Added a flag in scene to disable loading of images, makes it 50 times faster, at least :)
2006-07-02 18:26:20 +00:00
sce->r.scemode &= ~R_NO_IMAGE_LOAD;
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
}
else { /* PR_ICON_RENDER */
sce->r.scemode &= ~R_NODE_PREVIEW;
Bugfix #4557 Report noted the slow icon renders for menus, which indeed is an issue, especially when texture images need to be loaded (not to mention that will eat up loads of memory). Added a flag in scene to disable loading of images, makes it 50 times faster, at least :)
2006-07-02 18:26:20 +00:00
sce->r.scemode |= R_NO_IMAGE_LOAD;
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
}
/* allocates render result */
Bugfix: FSA enabled in compositing scene but disabled in other scenes could crash, there was code to make sure osa level is the same in all scenes, but that was set too late, after sample tables are created. Fix for some unitinialized vector warnings with FSA, these were harmless, unfortunately.
2008-02-11 11:00:09 +00:00
RE_InitState(re, NULL, &sce->r, ri->pr_rectx, ri->pr_recty, NULL);
Fix #4358 Was on the todo as well; previews in Shader Nodes didn't get cleared on re-renders, noticable when you switch preview type (i.e. sphere -> cube).
2006-06-19 17:29:44 +00:00
/* enforce preview image clear */
if(GS(id->name)==ID_MA) {
Material *ma= (Material *)id;
ntreeClearPreview(ma->nodetree);
}
Initial revision
2002-10-12 11:37:38 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* entire cycle for render engine */
RE_SetCamera(re, sce->camera);
RE_Database_FromScene(re, sce, 1);
Subsurface scattering: Documentation on the settings, known limitations and implementation info can be found here: http://www.blender.org/development/current-projects/changes-since-243/subsurface-scattering/
2007-05-03 21:37:52 +00:00
RE_TileProcessor(re, ri->curtile, 0); // actual render engine
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
RE_Database_Free(re);
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* handle results */
if(pr_method==PR_ICON_RENDER) {
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if(ri->rect==NULL)
ri->rect= MEM_mallocN(sizeof(int)*ri->pr_rectx*ri->pr_recty, "BIF_previewrender");
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
RE_ResultGet32(re, ri->rect);
Initial revision
2002-10-12 11:37:38 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
else {
rstats= RE_GetStats(re);
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if(rstats->partsdone!=ri->curtile) {
if(ri->rect==NULL)
ri->rect= MEM_mallocN(sizeof(int)*ri->pr_rectx*ri->pr_recty, "BIF_previewrender");
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
RE_ResultGet32(re, ri->rect);
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
}
if(rstats->totpart==rstats->partsdone && rstats->partsdone) {
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
if(GS(id->name)==ID_MA && ((Material *)id)->use_nodes)
allqueue(REDRAWNODE, 0);
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
allqueue(REDRAWBUTSSHADING, 0);
Initial revision
2002-10-12 11:37:38 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
else {
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if(pr_method==PR_DRAW_RENDER && qtest())
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
addafterqueue(area->win, RENDERPREVIEW, 1);
Should have done ages ago! This commit replaces the glDrawPixels and rectwrite_part with the very nice (thanks zr!) glaDrawPixelsSafe() call. Result is: - 3d window background image displays correctly onto the edges when zoomed in extreme - same for UV image window and sequence preview - preview render now doesnt disappear when left part is outside window (zr also deserves kick in butt for not doing this himself in NaN days!) Especially from preview drawing quite some old hacks were deleted. It is even quite some faster. Please notify me when it doesnt work on your card... this now is just 100% according opengl guidelines though :) Also fixes bug #2100
2005-01-07 21:48:25 +00:00
}
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
ri->curtile= rstats->partsdone;
ri->tottile= rstats->totpart;
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
}
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
Preview render fixes: - previous preview.blend rendered OSA, is too slow, especially for raytrace. now made it an extra option for buttons preview. (icons render without). - made monkey one level subsurf lower for speed - in previewblend, made the tiled cube environment entirely closed, so a mirror reflection will show nicer.
2006-06-20 09:31:54 +00:00
/* unassign the pointers, reset vars */
Previewrender (buttons) now supports Lamp, Texture and Sky previews again. One exception I didn't solve yet... for the Stucci texture. In a next commit I will add the preview.blend, so people can play with it! The rules for preview.blend are pretty primitive still... might become a bit more advanced later. Here's what it uses now: - If Object has name starting with 'p' it will get the to-be-previewed Material or Lamp assigned - If Object has name starting with 't' its Material gets the texture assigned for Texture previews The layer codes for current preview options are in DNA_material_types.h; #define MA_SPHERE 0 #define MA_CUBE 1 #define MA_FLAT 2 #define MA_MONKEY 3 #define MA_SPHERE_A 4 #define MA_TEXTURE 5 #define MA_LAMP 6 #define MA_SKY 7 (SPHERE_A is sphere with alpha for icons)
2006-01-29 13:10:20 +00:00
preview_prepare_scene(ri, GS(id->name), NULL, 0);
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* afterqueue call */
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
void BIF_previewrender_buts(SpaceButs *sbuts)
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
{
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
uiBlock *block;
struct ID* id = 0;
struct ID* idfrom = 0;
struct ID* idshow = 0;
Object *ob;
if (!sbuts->ri) return;
/* we safely assume curarea has panel "preview" */
/* quick hack for now, later on preview should become uiBlock itself */
block= uiFindOpenPanelBlockName(&curarea->uiblocks, "Preview");
if(block==NULL) return;
ob= ((G.scene->basact)? (G.scene->basact)->object: 0);
/* we cant trust this global lockpoin.. for example with headerless window */
buttons_active_id(&id, &idfrom);
G.buts->lockpoin= id;
if(sbuts->mainb==CONTEXT_SHADING) {
int tab= sbuts->tab[CONTEXT_SHADING];
if(tab==TAB_SHADING_MAT)
idshow = sbuts->lockpoin;
else if(tab==TAB_SHADING_TEX)
idshow = sbuts->lockpoin;
else if(tab==TAB_SHADING_LAMP) {
if(ob && ob->type==OB_LAMP) idshow= ob->data;
}
else if(tab==TAB_SHADING_WORLD)
idshow = sbuts->lockpoin;
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
}
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
else if(sbuts->mainb==CONTEXT_OBJECT) {
if(ob && ob->type==OB_LAMP) idshow = ob->data;
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
}
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
if (idshow) {
BKE_icon_changed(BKE_icon_getid(idshow));
uiPanelPush(block);
BIF_previewrender(idshow, sbuts->ri, sbuts->area, PR_DRAW_RENDER);
uiPanelPop(block);
end_previewrect();
}
else {
/* no active block to draw. But we do draw black if possible */
if(sbuts->ri->rect) {
memset(sbuts->ri->rect, 0, sizeof(int)*sbuts->ri->pr_rectx*sbuts->ri->pr_recty);
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
sbuts->ri->tottile= 10000;
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
addqueue(curarea->win, REDRAW, 1);
}
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
return;
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
}
}
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
/* is panel callback, supposed to be called with correct panel offset matrix */
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
void BIF_previewdraw(ScrArea *sa, uiBlock *block)
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
{
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
SpaceButs *sbuts= sa->spacedata.first;
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
short id_code= 0;
if(sbuts->lockpoin) {
ID *id= sbuts->lockpoin;
id_code= GS(id->name);
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
}
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
if (!sbuts->ri) {
sbuts->ri= MEM_callocN(sizeof(RenderInfo), "butsrenderinfo");
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
sbuts->ri->tottile = 10000;
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
}
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
if (sbuts->ri->rect==NULL) BIF_preview_changed(id_code);
else {
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
RenderInfo *ri= sbuts->ri;
int oldx= ri->pr_rectx, oldy= ri->pr_recty;
/* we now do scalable previews! */
set_previewrect(ri, sa->win);
Fix: buttons previewrender was re-rendering on scrolling a lot, this due to rounding noise when trying to detect if previewsize changed. Made it use a threshold now. Fix: SHIFT+P in editmode is still push/pull, outside editmode it'll do the preview render. (Note; editmode changes are not updated anyway!)
2006-01-30 19:39:05 +00:00
if( ABS(oldx-ri->pr_rectx)<2 && ABS(oldy-ri->pr_recty)<2 ) {
/* restore old values for drawing! */
ri->pr_rectx= oldx;
ri->pr_recty= oldy;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
glaDrawPixelsSafe(ri->disprect.xmin, ri->disprect.ymin, ri->pr_rectx, ri->pr_recty, ri->pr_rectx, GL_RGBA, GL_UNSIGNED_BYTE, ri->rect);
Fix: buttons previewrender was re-rendering on scrolling a lot, this due to rounding noise when trying to detect if previewsize changed. Made it use a threshold now. Fix: SHIFT+P in editmode is still push/pull, outside editmode it'll do the preview render. (Note; editmode changes are not updated anyway!)
2006-01-30 19:39:05 +00:00
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
else {
MEM_freeN(ri->rect);
ri->rect= NULL;
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
sbuts->ri->curtile= 0;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
}
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
end_previewrect();
}
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if(sbuts->ri->curtile==0) BIF_preview_changed(id_code);
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
Christmas coding work! ********* Node editor work: - To enable Nodes for Materials, you have to set the "Use Nodes" button, in the new Material buttons "Nodes" Panel or in header of the Node editor. Doing this will disable Material-Layers. - Nodes now execute materials ("shaders"), but still only using the previewrender code. - Nodes have (optional) previews for rendered images. - Node headers allow to hide buttons and/or preview image - Nodes can be dragged larger/smaller (right-bottom corner) - Nodes can be hidden (minimized) with hotkey H - CTRL+click on an Input Socket gives a popup with default values. - Changing Material/Texture or Mix node will adjust Node title. - Click-drag outside of a Node changes cursor to "Knife' and allows to draw a rect where to cut Links. - Added new node types RGBtoBW, Texture, In/Output, ColorRamp - Material Nodes have options to ouput diffuse or specular, or to use a negative normal. The input socket 'Normal' will force the material to use that normal, otherwise it uses the normal from the Material that has the node tree. - When drawing a link between two not-matching sockets, Blender inserts a converting node (now only for value/rgb combos) - When drawing a link to an input socket that's already in use, the old link will either disappear or flip to another unused socket. - A click on a Material Node will activate it, and show all its settings in the Material Buttons. Active Material Nodes draw the material icon in red. - A click on any node will show its options in the Node Panel in the Material buttons. - Multiple Output Nodes can be used, to sample contents of a tree, but only one Output is the real one, which is indicated in a different color and red material icon. - Added ThemeColors for node types - ALT+C will convert existing Material-Layers to Node... this currently only adds the material/mix nodes and connects them. Dunno if this is worth a lot of coding work to make perfect? - Press C to call another "Solve order", which will show all possible cyclic conflicts (if there are). - Technical: nodes now use "Type" structs which define the structure of nodes and in/output sockets. The Type structs store all fixed info, callbacks, and allow to reconstruct saved Nodes to match what is required by Blender. - Defining (new) nodes now is as simple as filling in a fixed Type struct, plus code some callbacks. A doc will be made! - Node preview images are by default float ********* Icon drawing: - Cleanup of how old icons were implemented in new system, making them 16x16 too, correctly centered *and* scaled. - Made drawing Icons use float coordinates - Moved BIF_calcpreview_image() into interface_icons.c, renamed it icon_from_image(). Removed a lot of unneeded Imbuf magic here! :) - Skipped scaling and imbuf copying when icons are OK size ********* Preview render: - Huge cleanup of code.... - renaming BIF_xxx calls that only were used internally - BIF_previewrender() now accepts an argument for rendering method, so it supports icons, buttonwindow previewrender and node editor - Only a single BIF_preview_changed() call now exists, supporting all signals as needed for buttos and node editor ********* More stuff: - glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format argument for GL_FLOAT rects - Made the ColorBand become a built-in button for interface.c Was a load of cleanup work in buttons_shading.c... - removed a load of unneeded glBlendFunc() calls - Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
}
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* *************************** Preview for 3d window *********************** */
static void view3d_previewrender_stats(RenderStats *rs)
{
Campbell report: Not clearing the value for 'parts rendered' caused 3d previewrender to sometimes fail doing updates (when an escape happens during converting render data).
2006-06-28 12:53:57 +00:00
// if(rs->convertdone)
// printf("rendered %d %.3f\n", rs->partsdone, rs->lastframetime);
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
}
Made the most critical variables in render pipeline "volatile", especially the ones that get changed within threads, to communicate with the main thread. (Part of the long quest to get threaded render safe, especially in Linux)
2006-02-24 10:20:31 +00:00
static void view3d_previewrender_progress(RenderResult *rr, volatile rcti *renrect)
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
{
RenderLayer *rl;
int ofsx, ofsy;
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if(renrect) return;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
rl= rr->layers.first;
/* this case is when we render envmaps... */
if(rr->rectx>G.vd->ri->pr_rectx || rr->recty>G.vd->ri->pr_recty)
return;
ofsx= G.vd->ri->disprect.xmin + rr->tilerect.xmin;
ofsy= G.vd->ri->disprect.ymin + rr->tilerect.ymin;
glDrawBuffer(GL_FRONT);
glaDefine2DArea(&curarea->winrct);
Switched the glaDrawPixelsSafe to glaDrawPixelsSafe_to32 in drawing the previews in buttons and 3d window. Drawing in frontbuffer a GL_FLOAT rect seems to be instable for ATIs still.
2006-06-20 20:05:10 +00:00
glaDrawPixelsSafe_to32(ofsx, ofsy, rr->rectx, rr->recty, rr->rectx, rl->rectf);
Siggraph show commit! - pending commit for OSX intel systems, with intel graphics. These now call an extra swapbuffers after glFlush(). Code is ifdeffed, and doesnt affect other systems. - show-off commit: option to have transparent nodes over the composite result. Only draws Image for active Viewer Node now, and image doesnt translate nor zoom (which isnt bad though). Set in themes the alpha color of "node backdrop" to make nodes transparent.
2006-07-31 19:23:42 +00:00
bglFlush();
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
glDrawBuffer(GL_BACK);
}
void BIF_view3d_previewrender_signal(ScrArea *sa, short signal)
{
View3D *v3d= sa->spacedata.first;
/* this can be called from other window... solve! */
if(sa->spacetype!=SPACE_VIEW3D)
v3d= G.vd;
if(v3d && v3d->ri) {
RenderInfo *ri= v3d->ri;
ri->status &= ~signal;
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
ri->curtile= 0;
Campbell report: Not clearing the value for 'parts rendered' caused 3d previewrender to sometimes fail doing updates (when an escape happens during converting render data).
2006-06-28 12:53:57 +00:00
//printf("preview signal %d\n", signal);
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
if(ri->re && (signal & PR_DBASE))
RE_Database_Free(ri->re);
addafterqueue(sa->win, RENDERPREVIEW, 1);
}
}
New: - ZTransp render now also delivers Z values and Speed vectors in passes Note that speed vectors accumulate within a pixel to store the minimum, so rendering ztransp on top of a non-moving plane won't give speed... Best results you get is by rendering it in a separate layer. The Z value stored is the closest visible transparent face in the pixel. Fixes: - Render to 'spare page' has been enabled again. Because of the strict separation of Render and UI, but especially because a 'render result' now can consist of unlimited images, I've not made this a Render feature. Instead, the render-window itself stores the 'spare' image... I also had to change the convention for it a bit. Now, instead of having two "render buffers" (which was a render feature), the RenderWindow will store each previous frame on a re-render. This storing will only start after you've pressed 'Jkey' once, but then always will happen for as long the rendered image is same size as previously. For clarity, I've also renamed the window title, to 'previous frame'. - RenderWindow shows alpha again on Akey - Display of the Zvalues in ImageWindow has been tweaked. White now denotes closest, and the color range goes from camera clip-sta to clip-end. - Bugfix: on splitting/merging/duplicating windows, the 3D Previewrender was not always freed correctly, potentially causing crashes or memory leaks.
2006-02-08 16:51:09 +00:00
void BIF_view3d_previewrender_free(View3D *v3d)
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
{
if(v3d->ri) {
RenderInfo *ri= v3d->ri;
if(ri->re) {
// printf("free render\n");
RE_Database_Free(ri->re);
RE_FreeRender(ri->re);
ri->re= NULL;
}
New: - ZTransp render now also delivers Z values and Speed vectors in passes Note that speed vectors accumulate within a pixel to store the minimum, so rendering ztransp on top of a non-moving plane won't give speed... Best results you get is by rendering it in a separate layer. The Z value stored is the closest visible transparent face in the pixel. Fixes: - Render to 'spare page' has been enabled again. Because of the strict separation of Render and UI, but especially because a 'render result' now can consist of unlimited images, I've not made this a Render feature. Instead, the render-window itself stores the 'spare' image... I also had to change the convention for it a bit. Now, instead of having two "render buffers" (which was a render feature), the RenderWindow will store each previous frame on a re-render. This storing will only start after you've pressed 'Jkey' once, but then always will happen for as long the rendered image is same size as previously. For clarity, I've also renamed the window title, to 'previous frame'. - RenderWindow shows alpha again on Akey - Display of the Zvalues in ImageWindow has been tweaked. White now denotes closest, and the color range goes from camera clip-sta to clip-end. - Bugfix: on splitting/merging/duplicating windows, the 3D Previewrender was not always freed correctly, potentially causing crashes or memory leaks.
2006-02-08 16:51:09 +00:00
if (v3d->ri->rect) MEM_freeN(v3d->ri->rect);
MEM_freeN(v3d->ri);
v3d->ri= NULL;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
}
}
/* returns 1 if OK, do not call while in panel space! */
SSS fixes: - Radius R, G, B sliders had too small number increase on clicking. - Preview render now renders with higher SSS error setting to speed it up a bit. - bug #6664: 3d preview render had artifacts. re->viewdx/dy wasn't set then, which is needed to estimate the area of each point. Have set this now, not in the nicest way, there is some bit duplicated code, but I don't want to refactor existing code with the chance of breaking it at this point. - bug #6665: grid like artifacts with parts rendering. The two extra pixels around parts used for filtering were used as well, leading to double points.
2007-05-08 10:15:51 +00:00
static int view3d_previewrender_get_rects(ScrArea *sa, rctf *viewplane, RenderInfo *ri, float *clipsta, float *clipend, int *ortho, float *pixsize)
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
{
int rectx, recty;
uiBlock *block;
block= uiFindOpenPanelBlockName(&curarea->uiblocks, "Preview");
if(block==NULL) return 0;
/* calculate preview rect size */
BLI_init_rctf(viewplane, 15.0f, (block->maxx - block->minx)-15.0f, 15.0f, (block->maxy - block->miny)-15.0f);
uiPanelPush(block);
ui_graphics_to_window_rct(sa->win, viewplane, &ri->disprect);
uiPanelPop(block);
/* correction for gla draw */
BLI_translate_rcti(&ri->disprect, -sa->winrct.xmin, -sa->winrct.ymin);
SSS fixes: - Radius R, G, B sliders had too small number increase on clicking. - Preview render now renders with higher SSS error setting to speed it up a bit. - bug #6664: 3d preview render had artifacts. re->viewdx/dy wasn't set then, which is needed to estimate the area of each point. Have set this now, not in the nicest way, there is some bit duplicated code, but I don't want to refactor existing code with the chance of breaking it at this point. - bug #6665: grid like artifacts with parts rendering. The two extra pixels around parts used for filtering were used as well, leading to double points.
2007-05-08 10:15:51 +00:00
*ortho= get_view3d_viewplane(sa->winx, sa->winy, viewplane, clipsta, clipend, pixsize);
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
rectx= ri->disprect.xmax - ri->disprect.xmin;
recty= ri->disprect.ymax - ri->disprect.ymin;
if(rectx<4 || recty<4) return 0;
if(ri->rect && (rectx!=ri->pr_rectx || recty!=ri->pr_recty)) {
MEM_freeN(ri->rect);
ri->rect= NULL;
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
ri->curtile= 0;
printf("changed size\n");
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
}
ri->pr_rectx= rectx;
ri->pr_recty= recty;
return 1;
}
/* called before a panel gets moved/scaled, makes sure we can see through */
void BIF_view3d_previewrender_clear(ScrArea *sa)
{
View3D *v3d= sa->spacedata.first;
if(v3d->ri) {
RenderInfo *ri= v3d->ri;
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
ri->curtile= 0;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
if(ri->rect)
MEM_freeN(ri->rect);
ri->rect= NULL;
}
}
/* afterqueue call */
void BIF_view3d_previewrender(ScrArea *sa)
{
View3D *v3d= sa->spacedata.first;
Render *re;
RenderInfo *ri; /* preview struct! */
RenderStats *rstats;
RenderData rdata;
rctf viewplane;
SSS fixes: - Radius R, G, B sliders had too small number increase on clicking. - Preview render now renders with higher SSS error setting to speed it up a bit. - bug #6664: 3d preview render had artifacts. re->viewdx/dy wasn't set then, which is needed to estimate the area of each point. Have set this now, not in the nicest way, there is some bit duplicated code, but I don't want to refactor existing code with the chance of breaking it at this point. - bug #6665: grid like artifacts with parts rendering. The two extra pixels around parts used for filtering were used as well, leading to double points.
2007-05-08 10:15:51 +00:00
float clipsta, clipend, pixsize;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
int orth;
/* first get the render info right */
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if (!v3d->ri) {
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
ri= v3d->ri= MEM_callocN(sizeof(RenderInfo), "butsrenderinfo");
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
ri->tottile= 10000;
}
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
ri= v3d->ri;
SSS fixes: - Radius R, G, B sliders had too small number increase on clicking. - Preview render now renders with higher SSS error setting to speed it up a bit. - bug #6664: 3d preview render had artifacts. re->viewdx/dy wasn't set then, which is needed to estimate the area of each point. Have set this now, not in the nicest way, there is some bit duplicated code, but I don't want to refactor existing code with the chance of breaking it at this point. - bug #6665: grid like artifacts with parts rendering. The two extra pixels around parts used for filtering were used as well, leading to double points.
2007-05-08 10:15:51 +00:00
if(0==view3d_previewrender_get_rects(sa, &viewplane, ri, &clipsta, &clipend, &orth, &pixsize))
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
return;
/* render is finished, so return */
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if(ri->tottile && ri->curtile>=ri->tottile) return;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* or return with a new event */
if(qtest()) {
addafterqueue(curarea->win, RENDERPREVIEW, 1);
return;
}
Campbell report: Not clearing the value for 'parts rendered' caused 3d previewrender to sometimes fail doing updates (when an escape happens during converting render data).
2006-06-28 12:53:57 +00:00
//printf("Enter previewrender\n");
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* ok, are we rendering all over? */
if(ri->re==NULL) {
char name[32];
ri->status= 0;
sprintf(name, "View3dPreview %d", sa->win);
re= ri->re= RE_NewRender(name);
RE_display_draw_cb(re, view3d_previewrender_progress);
RE_stats_draw_cb(re, view3d_previewrender_stats);
RE_test_break_cb(re, qtest);
Couple of features/fixes: - Compositor now frees memory of buffers internally used in groups immediately. This wasn't part of the event-based cache anyway - New option: "Free Texture Images" (in render Output panel). This frees after each render of each scene all images and mipmaps as used by textures. As reference it prints total amount of MB freed. - Render stage 'creating speed vectors' had no ESC checking yet - Made drawing scanline updates during render draw 1 scanline less... dunno, still hunting for weird opengl crashes. - 3D preview render didn't properly skip sequence or composit render.
2006-02-11 23:17:41 +00:00
/* no osa, blur, seq, layers, etc for preview render */
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
rdata= G.scene->r;
Couple of features/fixes: - Compositor now frees memory of buffers internally used in groups immediately. This wasn't part of the event-based cache anyway - New option: "Free Texture Images" (in render Output panel). This frees after each render of each scene all images and mipmaps as used by textures. As reference it prints total amount of MB freed. - Render stage 'creating speed vectors' had no ESC checking yet - Made drawing scanline updates during render draw 1 scanline less... dunno, still hunting for weird opengl crashes. - 3D preview render didn't properly skip sequence or composit render.
2006-02-11 23:17:41 +00:00
rdata.mode &= ~(R_OSA|R_MBLUR);
rdata.scemode &= ~(R_DOSEQ|R_DOCOMP|R_FREE_IMAGE);
Orange; more render & compo stuff! -> Rendering in RenderLayers It's important to distinguish a 'render layer' from a 'pass'. The first is control over the main pipeline itself, to indicate what geometry is being is rendered. The 'pass' (not in this commit!) is related to internal shading code, like shadow/spec/AO/normals/etc. Options for RenderLayers now are: - Indicate which 3d 'view layers' have to be included (so you can render front and back separately) - "Solid", all solid faces, includes sky at the moment too - "ZTransp", all transparent faces - "Halo", the halos - "Strand", the particle strands (not coded yet...) Currently only 2 'passes' are exported for render, which is the "Combined" buffer and the "Z. The latter now works, and can be turned on/off. Note that all layers are still fully kept in memory now, saving the tiles and layers to disk (in exr) is also todo. -> New Blur options The existing Blur Node (compositor) now has an optional input image. This has to be a 'value buffer', which can be a Zbuffer, or any mask you can think of. The input values have to be in the 0-1 range, so another new node was added too "Map Value". The value input can also be used to tweak blur size with the (todo) Time Node. Temporal screenies: http://www.blender.org/bf/rt.jpg http://www.blender.org/bf/rt1.jpg http://www.blender.org/bf/rt2.jpg BTW: The compositor is very slow still, it recalulates all nodes on each change still. Persistant memory and dependency checks is coming!
2006-01-26 22:18:46 +00:00
rdata.layers.first= rdata.layers.last= NULL;
Bugfix #4397 3D Window preview render accidentally called Yafray. That's a not working feature yet. Could work for external renders though, but that's for another time i think. :)
2006-06-22 09:35:09 +00:00
rdata.renderer= R_INTERN;
Bugfix: FSA enabled in compositing scene but disabled in other scenes could crash, there was code to make sure osa level is the same in all scenes, but that was set too late, after sample tables are created. Fix for some unitinialized vector warnings with FSA, these were harmless, unfortunately.
2008-02-11 11:00:09 +00:00
RE_InitState(re, NULL, &rdata, sa->winx, sa->winy, &ri->disprect);
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
if(orth)
RE_SetOrtho(re, &viewplane, clipsta, clipend);
else
RE_SetWindow(re, &viewplane, clipsta, clipend);
SSS fixes: - Radius R, G, B sliders had too small number increase on clicking. - Preview render now renders with higher SSS error setting to speed it up a bit. - bug #6664: 3d preview render had artifacts. re->viewdx/dy wasn't set then, which is needed to estimate the area of each point. Have set this now, not in the nicest way, there is some bit duplicated code, but I don't want to refactor existing code with the chance of breaking it at this point. - bug #6665: grid like artifacts with parts rendering. The two extra pixels around parts used for filtering were used as well, leading to double points.
2007-05-08 10:15:51 +00:00
RE_SetPixelSize(re, pixsize);
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
/* until here are no escapes */
ri->status |= PR_DISPRECT;
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
ri->curtile= 0;
Campbell report: Not clearing the value for 'parts rendered' caused 3d previewrender to sometimes fail doing updates (when an escape happens during converting render data).
2006-06-28 12:53:57 +00:00
//printf("new render\n");
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
}
re= ri->re;
PIL_sleep_ms(100); /* wait 0.1 second if theres really no event... */
if(qtest()==0) {
/* check status */
if((ri->status & PR_DISPRECT)==0) {
RE_SetDispRect(ri->re, &ri->disprect);
if(orth)
RE_SetOrtho(ri->re, &viewplane, clipsta, clipend);
else
RE_SetWindow(ri->re, &viewplane, clipsta, clipend);
SSS fixes: - Radius R, G, B sliders had too small number increase on clicking. - Preview render now renders with higher SSS error setting to speed it up a bit. - bug #6664: 3d preview render had artifacts. re->viewdx/dy wasn't set then, which is needed to estimate the area of each point. Have set this now, not in the nicest way, there is some bit duplicated code, but I don't want to refactor existing code with the chance of breaking it at this point. - bug #6665: grid like artifacts with parts rendering. The two extra pixels around parts used for filtering were used as well, leading to double points.
2007-05-08 10:15:51 +00:00
RE_SetPixelSize(re, pixsize);
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
ri->status |= PR_DISPRECT;
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
ri->curtile= 0;
Campbell report: Not clearing the value for 'parts rendered' caused 3d previewrender to sometimes fail doing updates (when an escape happens during converting render data).
2006-06-28 12:53:57 +00:00
//printf("disprect update\n");
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
}
if((ri->status & PR_DBASE)==0) {
unsigned int lay= G.scene->lay;
RE_SetView(re, G.vd->viewmat);
/* allow localview render for objects with lights in normal layers */
if(v3d->lay & 0xFF000000)
G.scene->lay |= v3d->lay;
else G.scene->lay= v3d->lay;
RE_Database_FromScene(re, G.scene, 0); // 0= dont use camera view
G.scene->lay= lay;
rstats= RE_GetStats(re);
if(rstats->convertdone)
ri->status |= PR_DBASE|PR_PROJECTED|PR_ROTATED;
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
ri->curtile= 0;
Bugfix #4625 Using the 3d window preview render, fluidsim objects gave drawing errors. Was caused by missing object recalc signals after creating the render database (happens on different resolutions for fluidsim). Note to self: the separation between 'render' and 'display' is still a weak part in the Derived/Displist code...
2006-07-06 10:10:41 +00:00
/* database can have created render-resol data... */
if(rstats->convertdone)
DAG_scene_update_flags(G.scene, screen_view3d_layers());
Campbell report: Not clearing the value for 'parts rendered' caused 3d previewrender to sometimes fail doing updates (when an escape happens during converting render data).
2006-06-28 12:53:57 +00:00
//printf("dbase update\n");
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
}
if((ri->status & PR_PROJECTED)==0) {
if(ri->status & PR_DBASE) {
if(orth)
RE_SetOrtho(ri->re, &viewplane, clipsta, clipend);
else
RE_SetWindow(ri->re, &viewplane, clipsta, clipend);
RE_DataBase_ApplyWindow(re);
ri->status |= PR_PROJECTED;
}
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
ri->curtile= 0;
Campbell report: Not clearing the value for 'parts rendered' caused 3d previewrender to sometimes fail doing updates (when an escape happens during converting render data).
2006-06-28 12:53:57 +00:00
//printf("project update\n");
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
}
/* OK, can we enter render code? */
if(ri->status==(PR_DISPRECT|PR_DBASE|PR_PROJECTED|PR_ROTATED)) {
Campbell report: Not clearing the value for 'parts rendered' caused 3d previewrender to sometimes fail doing updates (when an escape happens during converting render data).
2006-06-28 12:53:57 +00:00
//printf("curtile %d tottile %d\n", ri->curtile, ri->tottile);
Subsurface scattering: Documentation on the settings, known limitations and implementation info can be found here: http://www.blender.org/development/current-projects/changes-since-243/subsurface-scattering/
2007-05-03 21:37:52 +00:00
RE_TileProcessor(ri->re, ri->curtile, 0);
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
if(ri->rect==NULL)
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
ri->rect= MEM_mallocN(sizeof(int)*ri->pr_rectx*ri->pr_recty, "preview view3d rect");
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
RE_ResultGet32(ri->re, ri->rect);
}
rstats= RE_GetStats(ri->re);
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if(rstats->totpart==rstats->partsdone && rstats->partsdone)
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
addqueue(sa->win, REDRAW, 1);
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
else
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
addafterqueue(curarea->win, RENDERPREVIEW, 1);
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
ri->curtile= rstats->partsdone;
ri->tottile= rstats->totpart;
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
}
else {
addafterqueue(curarea->win, RENDERPREVIEW, 1);
}
Campbell report: Not clearing the value for 'parts rendered' caused 3d previewrender to sometimes fail doing updates (when an escape happens during converting render data).
2006-06-28 12:53:57 +00:00
//printf("\n");
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
}
/* in panel space! */
static void view3d_previewdraw_rect(ScrArea *sa, uiBlock *block, RenderInfo *ri)
{
rctf dispf;
if(ri->rect==NULL)
return;
BLI_init_rctf(&dispf, 15.0f, (block->maxx - block->minx)-15.0f, 15.0f, (block->maxy - block->miny)-15.0f);
ui_graphics_to_window_rct(sa->win, &dispf, &ri->disprect);
/* correction for gla draw */
BLI_translate_rcti(&ri->disprect, -curarea->winrct.xmin, -curarea->winrct.ymin);
/* when panel scale changed, free rect */
if(ri->disprect.xmax-ri->disprect.xmin != ri->pr_rectx ||
ri->disprect.ymax-ri->disprect.ymin != ri->pr_recty) {
MEM_freeN(ri->rect);
ri->rect= NULL;
}
else {
glaDefine2DArea(&sa->winrct);
glaDrawPixelsSafe(ri->disprect.xmin, ri->disprect.ymin, ri->pr_rectx, ri->pr_recty, ri->pr_rectx, GL_RGBA, GL_UNSIGNED_BYTE, ri->rect);
}
}
/* is panel callback, supposed to be called with correct panel offset matrix */
void BIF_view3d_previewdraw(struct ScrArea *sa, struct uiBlock *block)
{
View3D *v3d= sa->spacedata.first;
if (v3d->ri==NULL || v3d->ri->rect==NULL)
addafterqueue(sa->win, RENDERPREVIEW, 1);
else {
view3d_previewdraw_rect(sa, block, v3d->ri);
Preview rendering improvement; Until now, on each mouse/key event preview render restarted with first tile. It now rememers where it was, and continues rendering. Also tried to get threaded preview working, but its more work than I can spend right now. Back to bugs :)
2006-02-13 19:27:16 +00:00
if(v3d->ri->curtile==0)
Giant commit! A full detailed description of this will be done later... is several days of work. Here's a summary: Render: - Full cleanup of render code, removing *all* globals and bad level calls all over blender. Render module is now not called abusive anymore - API-fied calls to rendering - Full recode of internal render pipeline. Is now rendering tiles by default, prepared for much smarter 'bucket' render later. - Each thread now can render a full part - Renders were tested with 4 threads, goes fine, apart from some lookup tables in softshadow and AO still - Rendering is prepared to do multiple layers and passes - No single 32 bits trick in render code anymore, all 100% floats now. Writing images/movies - moved writing images to blender kernel (bye bye 'schrijfplaatje'!) - made a new Movie handle system, also in kernel. This will enable much easier use of movies in Blender PreviewRender: - Using new render API, previewrender (in buttons) now uses regular render code to generate images. - new datafile 'preview.blend.c' has the preview scenes in it - previews get rendered in exact displayed size (1 pixel = 1 pixel) 3D Preview render - new; press Pkey in 3d window, for a panel that continuously renders (pkey is for games, i know... but we dont do that in orange now!) - this render works nearly identical to buttons-preview render, so it stops rendering on any event (mouse, keyboard, etc) - on moving/scaling the panel, the render code doesn't recreate all geometry - same for shifting/panning view - all other operations (now) regenerate the full render database still. - this is WIP... but big fun, especially for simple scenes! Compositor - Using same node system as now in use for shaders, you can composit images - works pretty straightforward... needs much more options/tools and integration with rendering still - is not threaded yet, nor is so smart to only recalculate changes... will be done soon! - the "Render Result" node will get all layers/passes as output sockets - The "Output" node renders to a builtin image, which you can view in the Image window. (yes, output nodes to render-result, and to files, is on the list!) The Bad News - "Unified Render" is removed. It might come back in some stage, but this system should be built from scratch. I can't really understand this code... I expect it is not much needed, especially with advanced layer/passes control - Panorama render, Field render, Motion blur, is not coded yet... (I had to recode every single feature in render, so...!) - Lens Flare is also not back... needs total revision, might become composit effect though (using zbuffer for visibility) - Part render is gone! (well, thats obvious, its default now). - The render window is only restored with limited functionality... I am going to check first the option to render to a Image window, so Blender can become a true single-window application. :) For example, the 'Spare render buffer' (jkey) doesnt work. - Render with border, now default creates a smaller image - No zbuffers are written yet... on the todo! - Scons files and MSVC will need work to get compiling again OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
addafterqueue(sa->win, RENDERPREVIEW, 1);
}
}
Big commit in orange: Interface icons for materials, textures world and lamp. Also for images in pupmenus. Also preparation for work on using preview images in imagebrowser. -- Andrea
2005-12-21 22:21:43 +00:00
Copy Permalink