blender-archive/source/blender/bmesh/operators/bmo_inset.c

/*
 * ***** BEGIN GPL LICENSE BLOCK *****
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 *
 * Contributor(s): Campbell Barton
 *
 * ***** END GPL LICENSE BLOCK *****
 */

/** \file blender/bmesh/operators/bmo_inset.c
 *  \ingroup bmesh
 *
 * Inset face regions.
 * Inset individual faces.
 *
 */

#include "MEM_guardedalloc.h"

#include "BLI_math.h"
#include "BLI_array.h"

#include "bmesh.h"

#include "intern/bmesh_operators_private.h" /* own include */

#define ELE_NEW		1



/* -------------------------------------------------------------------- */
/* Inset Indervidual */


/* Holds Per-Face Inset Edge Data */
typedef struct EdgeInsetInfo {
	float no[3];
	BMEdge *e_old;
	BMEdge *e_new;
} EdgeInsetInfo;

/**
 * Individual Face Inset.
 * Find all tagged faces (f), duplicate edges around faces, inset verts of
 * created edges, create new faces between old and new edges, fill face
 * between connected new edges, kill old face (f).
 */
void bmo_inset_individual_exec(BMesh *bm, BMOperator *op)
{
	BMEdge **f_edges = NULL;
	BMVert **f_verts = NULL;
	BMFace *f;

	BMOIter oiter;
	EdgeInsetInfo *eiinfo_arr = NULL;

	BLI_array_declare(eiinfo_arr);
	BLI_array_declare(f_edges);
	BLI_array_declare(f_verts);

	const float thickness = BMO_slot_float_get(op->slots_in, "thickness");
	const float depth = BMO_slot_float_get(op->slots_in, "depth");
	const bool use_even_offset = BMO_slot_bool_get(op->slots_in, "use_even_offset");

	/* Only tag faces in slot */
	BM_mesh_elem_hflag_disable_all(bm, BM_FACE, BM_ELEM_TAG, false);

	BMO_slot_buffer_hflag_enable(bm, op->slots_in, "faces", BM_FACE, BM_ELEM_TAG, false);

	BMO_ITER(f, &oiter, op->slots_in, "faces", BM_FACE) {
		BMLoop *l_iter, *l_first;
		BMLoop *l_iter_inner = NULL;
		int i;

		BLI_array_empty(f_verts);
		BLI_array_empty(f_edges);
		BLI_array_empty(eiinfo_arr);
		BLI_array_grow_items(f_verts, f->len);
		BLI_array_grow_items(f_edges, f->len);
		BLI_array_grow_items(eiinfo_arr, f->len);

		/* create verts */
		i = 0;
		l_iter = l_first = BM_FACE_FIRST_LOOP(f);
		do {
			f_verts[i] = BM_vert_create(bm, l_iter->v->co, l_iter->v, 0);
			i++;
		} while ((l_iter = l_iter->next) != l_first);

		/* make edges */
		i = 0;
		l_iter = l_first;
		do {
			f_edges[i] = BM_edge_create(bm, f_verts[i], f_verts[(i + 1) % f->len], l_iter->e, 0);

			eiinfo_arr[i].e_new = f_edges[i];
			eiinfo_arr[i].e_old = l_iter->e;
			BM_edge_calc_face_tangent(l_iter->e, l_iter, eiinfo_arr[i].no);

			/* Tagging (old elements) required when iterating over edges
			 * connected to verts for translation vector calculation */
			BM_elem_flag_enable(l_iter->e, BM_ELEM_TAG);
			BM_elem_index_set(l_iter->e, i);  /* set_dirty! */
			i++;
		} while ((l_iter = l_iter->next) != l_first);
		/* done with edges */

		bm->elem_index_dirty |= BM_EDGE;

		/* Calculate translation vector for new  */
		l_iter = l_first;
		do {
			EdgeInsetInfo *ei_prev = &eiinfo_arr[BM_elem_index_get(l_iter->prev->e)];
			EdgeInsetInfo *ei_next = &eiinfo_arr[BM_elem_index_get(l_iter->e)];
			float tvec[3];
			float v_new_co[3];
			int index = 0;

			add_v3_v3v3(tvec, ei_prev->no, ei_next->no);
			normalize_v3(tvec);

			/* l->e is traversed in order */
			index = BM_elem_index_get(l_iter->e);

			copy_v3_v3(v_new_co, eiinfo_arr[index].e_new->v1->co);

			if (use_even_offset) {
				mul_v3_fl(tvec, shell_angle_to_dist(angle_normalized_v3v3(ei_prev->no,  ei_next->no) / 2.0f));
			}

			/* Modify vertices and their normals */
			madd_v3_v3fl(v_new_co, tvec, thickness);

			/* Set normal, add depth and write new vertex position*/
			copy_v3_v3(eiinfo_arr[index].e_new->v1->no, f->no);

			madd_v3_v3fl(v_new_co, f->no, depth);

			copy_v3_v3(eiinfo_arr[index].e_new->v1->co, v_new_co);
		} while ((l_iter = l_iter->next) != l_first);

		{
			BMFace *f_new_inner;
			/* Create New Inset Faces */
			f_new_inner = BM_face_create(bm, f_verts, f_edges, f->len, 0);
			if (UNLIKELY(f_new_inner == NULL)) {
				BMO_error_raise(bm, op, BMERR_MESH_ERROR, "Inset failed: could not create inner face.");
				BLI_array_free(f_edges);
				BLI_array_free(f_verts);
				BLI_array_free(eiinfo_arr);
				return;
			}

			/* Copy Face Data */
			BM_elem_attrs_copy(bm, bm, f, f_new_inner);
			// Don't tag, gives more useful inner/outer select option
			// BMO_elem_flag_enable(bm, f_new_inner, ELE_NEW);

			l_iter_inner = BM_FACE_FIRST_LOOP(f_new_inner);
		}

		l_iter = l_first;
		do {
			BMFace *f_new_outer;

			BMLoop *l_iter_sub;
			BMLoop *l_a = NULL;
			BMLoop *l_b = NULL;
			BMLoop *l_a_other = NULL;
			BMLoop *l_b_other = NULL;
			BMLoop *l_shared = NULL;

			BM_elem_attrs_copy(bm, bm, l_iter, l_iter_inner);

			f_new_outer = BM_face_create_quad_tri(bm,
			                                      l_iter->v,
			                                      l_iter->next->v,
			                                      l_iter_inner->next->v,
			                                      l_iter_inner->v,
			                                      f, false);

			if (UNLIKELY(f_new_outer == NULL)) {
				BMO_error_raise(bm, op, BMERR_MESH_ERROR, "Inset failed: could not create an outer face.");
				BLI_array_free(f_edges);
				BLI_array_free(f_verts);
				BLI_array_free(eiinfo_arr);
				return;
			}

			BM_elem_attrs_copy(bm, bm, f, f_new_outer);
			BMO_elem_flag_enable(bm, f_new_outer, ELE_NEW);
			BM_elem_flag_enable(f_new_outer, BM_ELEM_TAG);

			/* Copy Loop Data */
			l_a = BM_FACE_FIRST_LOOP(f_new_outer);
			l_b = l_a->next;

			l_iter_sub = l_iter;

			/* Skip old face f and new inset face.
			 * If loop if found we are a boundary. This
			 * is required as opposed to BM_edge_is_boundary()
			 * Because f_new_outer shares an edge with f */
			do {
				if (l_iter_sub->f != f && l_iter_sub->f != f_new_outer) {
					l_shared = l_iter_sub;
					break;
				}
			} while ((l_iter_sub = l_iter_sub->radial_next) != l_iter);

			if (l_shared) {
				BM_elem_attrs_copy(bm, bm, l_shared, l_a->next);
				BM_elem_attrs_copy(bm, bm, l_shared->next, l_a);
			}
			else {
				l_a_other = BM_edge_other_loop(l_a->e, l_a);
				l_b_other = l_a_other->next;
				BM_elem_attrs_copy(bm, bm, l_a_other, l_a);
				BM_elem_attrs_copy(bm, bm, l_b_other, l_b);
			}

			/* Move to the last two loops in new face */
			l_a = l_b->next;
			l_b = l_a->next;

			/* This loop should always have >1 radials
			 * (associated edge connects new and old face) */
			BM_elem_attrs_copy(bm, bm, l_iter, l_b);
			BM_elem_attrs_copy(bm, bm, l_iter->next, l_a);

		} while ((l_iter_inner = l_iter_inner->next),
		         (l_iter = l_iter->next) != l_first);

		BM_face_kill(bm, f);
	}

	/* we could flag new edges/verts too, is it useful? */
	BMO_slot_buffer_from_enabled_flag(bm, op, op->slots_out, "faces.out", BM_FACE, ELE_NEW);

	BLI_array_free(f_verts);
	BLI_array_free(f_edges);
	BLI_array_free(eiinfo_arr);
}



/* -------------------------------------------------------------------- */
/* Inset Region */

typedef struct SplitEdgeInfo {
	float   no[3];
	float   length;
	BMEdge *e_old;
	BMEdge *e_new;
	BMLoop *l;
} SplitEdgeInfo;

/**
 * return the tag loop where there is...
 * - only 1 tagged face attached to this edge.
 * - 1 or more untagged faces.
 *
 * \note this function looks to be expensive
 * but in most cases it will only do 2 iterations.
 */
static BMLoop *bm_edge_is_mixed_face_tag(BMLoop *l)
{
	if (LIKELY(l != NULL)) {
		int tot_tag = 0;
		int tot_untag = 0;
		BMLoop *l_iter;
		BMLoop *l_tag = NULL;
		l_iter = l;
		do {
			if (BM_elem_flag_test(l_iter->f, BM_ELEM_TAG)) {
				/* more then one tagged face - bail out early! */
				if (tot_tag == 1) {
					return NULL;
				}
				l_tag = l_iter;
				tot_tag++;
			}
			else {
				tot_untag++;
			}

		} while ((l_iter = l_iter->radial_next) != l);

		return ((tot_tag == 1) && (tot_untag >= 1)) ? l_tag : NULL;
	}
	else {
		return NULL;
	}
}

/**
 * implementation is as follows...
 *
 * - set all faces as tagged/untagged based on selection.
 * - find all edges that have 1 tagged, 1 untagged face.
 * - separate these edges and tag vertices, set their index to point to the original edge.
 * - build faces between old/new edges.
 * - inset the new edges into their faces.
 */

void bmo_inset_exec(BMesh *bm, BMOperator *op)
{
	const bool use_outset          = BMO_slot_bool_get(op->slots_in, "use_outset");
	const bool use_boundary        = BMO_slot_bool_get(op->slots_in, "use_boundary") && (use_outset == false);
	const bool use_even_offset     = BMO_slot_bool_get(op->slots_in, "use_even_offset");
	const bool use_even_boundry    = use_even_offset; /* could make own option */
	const bool use_relative_offset = BMO_slot_bool_get(op->slots_in, "use_relative_offset");
	const float thickness          = BMO_slot_float_get(op->slots_in, "thickness");
	const float depth              = BMO_slot_float_get(op->slots_in, "depth");

	int edge_info_len = 0;

	BMIter iter;
	SplitEdgeInfo *edge_info;
	SplitEdgeInfo *es;

	BMVert *v;
	BMEdge *e;
	BMFace *f;
	int i, j, k;

	if (use_outset == false) {
		BM_mesh_elem_hflag_disable_all(bm, BM_FACE, BM_ELEM_TAG, false);
		BMO_slot_buffer_hflag_enable(bm, op->slots_in, "faces", BM_FACE, BM_ELEM_TAG, false);
	}
	else {
		BM_mesh_elem_hflag_enable_all(bm, BM_FACE, BM_ELEM_TAG, false);
		BMO_slot_buffer_hflag_disable(bm, op->slots_in, "faces", BM_FACE, BM_ELEM_TAG, false);
	}

	/* first count all inset edges we will split */
	/* fill in array and initialize tagging */
	BM_ITER_MESH (e, &iter, bm, BM_EDGES_OF_MESH) {
		if (
		    /* tag if boundary is enabled */
		    (use_boundary && BM_edge_is_boundary(e) && BM_elem_flag_test(e->l->f, BM_ELEM_TAG)) ||

		    /* tag if edge is an interior edge inbetween a tagged and untagged face */
		    (bm_edge_is_mixed_face_tag(e->l)))
		{
			/* tag */
			BM_elem_flag_enable(e->v1, BM_ELEM_TAG);
			BM_elem_flag_enable(e->v2, BM_ELEM_TAG);
			BM_elem_flag_enable(e, BM_ELEM_TAG);

			BM_elem_index_set(e, edge_info_len); /* set_dirty! */
			edge_info_len++;
		}
		else {
			BM_elem_flag_disable(e->v1, BM_ELEM_TAG);
			BM_elem_flag_disable(e->v2, BM_ELEM_TAG);
			BM_elem_flag_disable(e, BM_ELEM_TAG);

			BM_elem_index_set(e, -1); /* set_dirty! */
		}
	}
	bm->elem_index_dirty |= BM_EDGE;

	edge_info = MEM_mallocN(edge_info_len * sizeof(SplitEdgeInfo), __func__);

	/* fill in array and initialize tagging */
	es = edge_info;
	BM_ITER_MESH (e, &iter, bm, BM_EDGES_OF_MESH) {
		i = BM_elem_index_get(e);
		if (i != -1) {
			/* calc edge-split info */
			es->length = BM_edge_calc_length(e);
			es->e_old = e;
			es++;
			/* initialize no and e_new after */
		}
	}

	for (i = 0, es = edge_info; i < edge_info_len; i++, es++) {
		if ((es->l = bm_edge_is_mixed_face_tag(es->e_old->l))) {
			/* do nothing */
		}
		else {
			es->l = es->e_old->l; /* must be a boundary */
		}


		/* run the separate arg */
		bmesh_edge_separate(bm, es->e_old, es->l);

		/* calc edge-split info */
		es->e_new = es->l->e;
		BM_edge_calc_face_tangent(es->e_new, es->l, es->no);

		if (es->e_new == es->e_old) { /* happens on boundary edges */
			/* take care here, we're creating this double edge which _must_ have its verts replaced later on */
			es->e_old = BM_edge_create(bm, es->e_new->v1, es->e_new->v2, es->e_new, 0);
		}

		/* store index back to original in 'edge_info' */
		BM_elem_index_set(es->e_new, i);
		BM_elem_flag_enable(es->e_new, BM_ELEM_TAG);

		/* important to tag again here */
		BM_elem_flag_enable(es->e_new->v1, BM_ELEM_TAG);
		BM_elem_flag_enable(es->e_new->v2, BM_ELEM_TAG);
	}


	/* show edge normals for debugging */
#if 0
	for (i = 0, es = edge_info; i < edge_info_len; i++, es++) {
		float tvec[3];
		BMVert *v1, *v2;

		mid_v3_v3v3(tvec, es->e_new->v1->co, es->e_new->v2->co);

		v1 = BM_vert_create(bm, tvec, NULL);
		v2 = BM_vert_create(bm, tvec, NULL);
		madd_v3_v3fl(v2->co, es->no, 0.1f);
		BM_edge_create(bm, v1, v2, NULL, 0);
	}
#endif

	/* execute the split and position verts, it would be most obvious to loop over verts
	 * here but don't do this since we will be splitting them off (iterating stuff you modify is bad juju)
	 * instead loop over edges then their verts */
	for (i = 0, es = edge_info; i < edge_info_len; i++, es++) {
		for (j = 0; j < 2; j++) {
			v = (j == 0) ? es->e_new->v1 : es->e_new->v2;

			/* end confusing part - just pretend this is a typical loop on verts */

			/* only split of tagged verts - used by separated edges */

			/* comment the first part because we know this verts in a tagged face */
			if (/* v->e && */BM_elem_flag_test(v, BM_ELEM_TAG)) {
				BMVert **vout;
				int r_vout_len;
				BMVert *v_glue = NULL;

				/* disable touching twice, this _will_ happen if the flags not disabled */
				BM_elem_flag_disable(v, BM_ELEM_TAG);

				bmesh_vert_separate(bm, v, &vout, &r_vout_len);
				v = NULL; /* don't use again */

				/* in some cases the edge doesn't split off */
				if (r_vout_len == 1) {
					MEM_freeN(vout);
					continue;
				}

				for (k = 0; k < r_vout_len; k++) {
					BMVert *v_split = vout[k]; /* only to avoid vout[k] all over */

					/* need to check if this vertex is from a */
					int vert_edge_tag_tot = 0;
					int vecpair[2];

					/* find adjacent */
					BM_ITER_ELEM (e, &iter, v_split, BM_EDGES_OF_VERT) {
						if (BM_elem_flag_test(e, BM_ELEM_TAG) &&
						    e->l && BM_elem_flag_test(e->l->f, BM_ELEM_TAG))
						{
							if (vert_edge_tag_tot < 2) {
								vecpair[vert_edge_tag_tot] = BM_elem_index_get(e);
								BLI_assert(vecpair[vert_edge_tag_tot] != -1);
							}

							vert_edge_tag_tot++;
						}
					}

					if (vert_edge_tag_tot != 0) {
						float tvec[3];

						if (vert_edge_tag_tot >= 2) { /* 2 edge users - common case */
							/* now there are 2 cases to check for,
							 *
							 * if both edges use the same face OR both faces have the same normal,
							 * ...then we can calculate an edge that fits nicely between the 2 edge normals.
							 *
							 * Otherwise use the shared edge OR the corner defined by these 2 face normals,
							 * when both edges faces are adjacent this works best but even when this vertex
							 * fans out faces it should work ok.
							 */

							SplitEdgeInfo *e_info_a = &edge_info[vecpair[0]];
							SplitEdgeInfo *e_info_b = &edge_info[vecpair[1]];

							BMFace *f_a = e_info_a->l->f;
							BMFace *f_b = e_info_b->l->f;

							/* we use this as either the normal OR to find the right direction for the
							 * cross product between both face normals */
							add_v3_v3v3(tvec, e_info_a->no, e_info_b->no);

							/* epsilon increased to fix [#32329] */
							if ((f_a == f_b) || compare_v3v3(f_a->no, f_b->no, 0.001f)) {
								normalize_v3(tvec);
							}
							else {
								/* these lookups are very quick */
								BMLoop *l_other_a = BM_loop_other_vert_loop(e_info_a->l, v_split);
								BMLoop *l_other_b = BM_loop_other_vert_loop(e_info_b->l, v_split);

								if (l_other_a->v == l_other_b->v) {
									/* both edges faces are adjacent, but we don't need to know the shared edge
									 * having both verts is enough. */
									sub_v3_v3v3(tvec, l_other_a->v->co, v_split->co);
								}
								else {
									/* faces don't touch,
									 * just get cross product of their normals, its *good enough*
									 */
									float tno[3];
									cross_v3_v3v3(tno, f_a->no, f_b->no);
									if (dot_v3v3(tvec, tno) < 0.0f) {
										negate_v3(tno);
									}
									copy_v3_v3(tvec, tno);
								}

								normalize_v3(tvec);
							}

							/* scale by edge angle */
							if (use_even_offset) {
								mul_v3_fl(tvec, shell_angle_to_dist(angle_normalized_v3v3(e_info_a->no,
								                                                          e_info_b->no) / 2.0f));
							}

							/* scale relative to edge lengths */
							if (use_relative_offset) {
								mul_v3_fl(tvec, (edge_info[vecpair[0]].length + edge_info[vecpair[1]].length) / 2.0f);
							}
						}
						else if (vert_edge_tag_tot == 1) { /* 1 edge user - boundary vert, not so common */
							const float *e_no_a = edge_info[vecpair[0]].no;

							if (use_even_boundry) {

								/* This case where only one edge attached to v_split
								 * is used - ei - the face to inset is on a boundary.
								 *
								 *                  We want the inset to align flush with the
								 *                  boundary edge, not the normal of the interior
								 *             <--- edge which would give an unsightly bump.
								 * --+-------------------------+---------------+--
								 *   |^v_other    ^e_other    /^v_split        |
								 *   |                       /                 |
								 *   |                      /                  |
								 *   |                     / <- tag split edge |
								 *   |                    /                    |
								 *   |                   /                     |
								 *   |                  /                      |
								 * --+-----------------+-----------------------+--
								 *   |                                         |
								 *   |                                         |
								 *
								 * note, the fact we are doing location comparisons on verts that are moved about
								 * doesn't matter because the direction will remain the same in this case.
								 */

								BMEdge *e_other;
								BMVert *v_other;
								/* loop will always be either next of prev */
								BMLoop *l = v_split->e->l;
								if (l->prev->v == v_split) {
									l = l->prev;
								}
								else if (l->next->v == v_split) {
									l = l->next;
								}
								else if (l->v == v_split) {
									/* pass */
								}
								else {
									/* should never happen */
									BLI_assert(0);
								}

								/* find the edge which is _not_ being split here */
								if (!BM_elem_flag_test(l->e, BM_ELEM_TAG)) {
									e_other = l->e;
								}
								else if (!BM_elem_flag_test(l->prev->e, BM_ELEM_TAG)) {
									e_other = l->prev->e;
								}
								else {
									BLI_assert(0);
									e_other = NULL;
								}

								v_other = BM_edge_other_vert(e_other, v_split);
								sub_v3_v3v3(tvec, v_other->co, v_split->co);
								normalize_v3(tvec);

								if (use_even_offset) {
									mul_v3_fl(tvec, shell_angle_to_dist(angle_normalized_v3v3(e_no_a, tvec)));
								}
							}
							else {
								copy_v3_v3(tvec, e_no_a);
							}

							/* use_even_offset - doesn't apply here */

							/* scale relative to edge length */
							if (use_relative_offset) {
								mul_v3_fl(tvec, edge_info[vecpair[0]].length);
							}
						}
						else {
							/* should never happen */
							BLI_assert(0);
							zero_v3(tvec);
						}

						/* apply the offset */
						madd_v3_v3fl(v_split->co, tvec, thickness);
					}

					/* this saves expensive/slow glue check for common cases */
					if (r_vout_len > 2) {
						bool ok = true;
						/* last step, NULL this vertex if has a tagged face */
						BM_ITER_ELEM (f, &iter, v_split, BM_FACES_OF_VERT) {
							if (BM_elem_flag_test(f, BM_ELEM_TAG)) {
								ok = false;
								break;
							}
						}

						if (ok) {
							if (v_glue == NULL) {
								v_glue = v_split;
							}
							else {
								BM_vert_splice(bm, v_split, v_glue);
							}
						}
					}
					/* end glue */

				}
				MEM_freeN(vout);
			}
		}
	}

	/* create faces */
	for (i = 0, es = edge_info; i < edge_info_len; i++, es++) {
		BMVert *varr[4] = {NULL};
		/* get the verts in the correct order */
		BM_edge_ordered_verts_ex(es->e_new, &varr[1], &varr[0], es->l);
#if 0
		if (varr[0] == es->e_new->v1) {
			varr[2] = es->e_old->v2;
			varr[3] = es->e_old->v1;
		}
		else {
			varr[2] = es->e_old->v1;
			varr[3] = es->e_old->v2;
		}
		j = 4;
#else
		/* slightly trickier check - since we can't assume the verts are split */
		j = 2; /* 2 edges are set */
		if (varr[0] == es->e_new->v1) {
			if (es->e_old->v2 != es->e_new->v2) { varr[j++] = es->e_old->v2; }
			if (es->e_old->v1 != es->e_new->v1) { varr[j++] = es->e_old->v1; }
		}
		else {
			if (es->e_old->v1 != es->e_new->v1) { varr[j++] = es->e_old->v1; }
			if (es->e_old->v2 != es->e_new->v2) { varr[j++] = es->e_old->v2; }
		}

		if (j == 2) {
			/* can't make face! */
			continue;
		}
#endif
		/* no need to check doubles, we KNOW there won't be any */
		/* yes - reverse face is correct in this case */
		f = BM_face_create_quad_tri_v(bm, varr, j, es->l->f, false);
		BMO_elem_flag_enable(bm, f, ELE_NEW);

		/* copy for loop data, otherwise UV's and vcols are no good.
		 * tiny speedup here we could be more clever and copy from known adjacent data
		 * also - we could attempt to interpolate the loop data, this would be much slower but more useful too */
#if 0
		/* don't use this because face boundaries have no adjacent loops and won't be filled in.
		 * instead copy from the opposite side with the code below */
		BM_face_copy_shared(bm, f);
#else
		{
			/* 2 inner loops on the edge between the new face and the original */
			BMLoop *l_a;
			BMLoop *l_b;
			BMLoop *l_a_other;
			BMLoop *l_b_other;

			l_a = BM_FACE_FIRST_LOOP(f);
			l_b = l_a->next;

			/* we know this side has a radial_next because of the order of created verts in the quad */
			l_a_other = BM_edge_other_loop(l_a->e, l_a);
			l_b_other = BM_edge_other_loop(l_a->e, l_b);
			BM_elem_attrs_copy(bm, bm, l_a_other, l_a);
			BM_elem_attrs_copy(bm, bm, l_b_other, l_b);

			/* step around to the opposite side of the quad - warning, this may have no other edges! */
			l_a = l_a->next->next;
			l_b = l_a->next;
			if (!BM_edge_is_boundary(l_a->e)) {
				/* same as above */
				l_a_other = BM_edge_other_loop(l_a->e, l_a);
				l_b_other = BM_edge_other_loop(l_a->e, l_b);
				BM_elem_attrs_copy(bm, bm, l_a_other, l_a);
				BM_elem_attrs_copy(bm, bm, l_b_other, l_b);
			}
			else {  /* boundary edges have no useful data to copy from, use opposite side of face */
				/* swap a<->b intentionally */
				BM_elem_attrs_copy(bm, bm, l_a_other, l_b);
				BM_elem_attrs_copy(bm, bm, l_b_other, l_a);
			}
		}
#endif
	}

	/* we could flag new edges/verts too, is it useful? */
	BMO_slot_buffer_from_enabled_flag(bm, op, op->slots_out, "faces.out", BM_FACE, ELE_NEW);

	/* cheap feature to add depth to the inset */
	if (depth != 0.0f) {
		float (*varr_co)[3];
		BMOIter oiter;

		/* we need to re-calculate tagged normals, but for this purpose we can copy tagged verts from the
		 * faces they inset from,  */
		for (i = 0, es = edge_info; i < edge_info_len; i++, es++) {
			zero_v3(es->e_new->v1->no);
			zero_v3(es->e_new->v2->no);
		}
		for (i = 0, es = edge_info; i < edge_info_len; i++, es++) {
			float *no = es->l->f->no;
			add_v3_v3(es->e_new->v1->no, no);
			add_v3_v3(es->e_new->v2->no, no);
		}
		for (i = 0, es = edge_info; i < edge_info_len; i++, es++) {
			/* annoying, avoid normalizing twice */
			if (len_squared_v3(es->e_new->v1->no) != 1.0f) {
				normalize_v3(es->e_new->v1->no);
			}
			if (len_squared_v3(es->e_new->v2->no) != 1.0f) {
				normalize_v3(es->e_new->v2->no);
			}
		}
		/* done correcting edge verts normals */

		/* untag verts */
		BM_mesh_elem_hflag_disable_all(bm, BM_VERT, BM_ELEM_TAG, false);

		/* tag face verts */
		BMO_ITER (f, &oiter, op->slots_in, "faces", BM_FACE) {
			BM_ITER_ELEM (v, &iter, f, BM_VERTS_OF_FACE) {
				BM_elem_flag_enable(v, BM_ELEM_TAG);
			}
		}

		/* do in 2 passes so moving the verts doesn't feed back into face angle checks
		 * which BM_vert_calc_shell_factor uses. */

		/* over allocate */
		varr_co = MEM_callocN(sizeof(*varr_co) * bm->totvert, __func__);

		BM_ITER_MESH_INDEX (v, &iter, bm, BM_VERTS_OF_MESH, i) {
			if (BM_elem_flag_test(v, BM_ELEM_TAG)) {
				const float fac = (depth *
				                   (use_relative_offset ? BM_vert_calc_mean_tagged_edge_length(v) : 1.0f) *
				                   (use_even_boundry    ? BM_vert_calc_shell_factor(v) : 1.0f));
				madd_v3_v3v3fl(varr_co[i], v->co, v->no, fac);
			}
		}

		BM_ITER_MESH_INDEX (v, &iter, bm, BM_VERTS_OF_MESH, i) {
			if (BM_elem_flag_test(v, BM_ELEM_TAG)) {
				copy_v3_v3(v->co, varr_co[i]);
			}
		}
		MEM_freeN(varr_co);
	}

	MEM_freeN(edge_info);
}