This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
blender-archive/source/blender/editors/space_image/image_render.c

175 lines
4.7 KiB
C
Raw Normal View History

2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
/**
* $Id$
*
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
2010-02-12 13:34:04 +00:00
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* Contributor(s): Blender Foundation, 2002-2009
*
* ***** END GPL LICENSE BLOCK *****
*/
#include <stdlib.h>
#include <stdio.h>
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
#include "DNA_screen_types.h"
#include "DNA_space_types.h"
#include "BKE_context.h"
#include "BKE_global.h"
#include "BKE_image.h"
#include "BKE_screen.h"
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
#include "BIF_gl.h"
#include "BIF_glutil.h"
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
#include "RE_pipeline.h"
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
#define HEADER_HEIGHT 18
/* *********************** render callbacks ***************** */
/* set on initialize render, only one render output to imagewindow can exist, so the global isnt dangerous yet :) */
static ScrArea *image_area= NULL;
/* can get as well the full picture, as the parts while rendering */
/* XXX will be obsolete, here for reference now */
void imagewindow_progress(SpaceImage *sima, RenderResult *rr, volatile rcti *renrect)
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
{
float x1, y1, *rectf= NULL;
unsigned int *rect32= NULL;
int ymin, ymax, xmin, xmax;
/* if renrect argument, we only display scanlines */
if(renrect) {
/* if ymax==recty, rendering of layer is ready, we should not draw, other things happen... */
if(rr->renlay==NULL || renrect->ymax>=rr->recty)
return;
/* xmin here is first subrect x coord, xmax defines subrect width */
xmin = renrect->xmin;
xmax = renrect->xmax - xmin;
if (xmax<2) return;
ymin= renrect->ymin;
ymax= renrect->ymax - ymin;
if(ymax<2)
return;
renrect->ymin= renrect->ymax;
}
else {
xmin = ymin = 0;
xmax = rr->rectx - 2*rr->crop;
ymax = rr->recty - 2*rr->crop;
}
/* image window cruft */
/* find current float rect for display, first case is after composit... still weak */
if(rr->rectf)
rectf= rr->rectf;
else {
if(rr->rect32)
rect32= (unsigned int *)rr->rect32;
else {
if(rr->renlay==NULL || rr->renlay->rectf==NULL) return;
rectf= rr->renlay->rectf;
}
}
if(rectf) {
/* if scanline updates... */
rectf+= 4*(rr->rectx*ymin + xmin);
/* when rendering more pixels than needed, we crop away cruft */
if(rr->crop)
rectf+= 4*(rr->crop*rr->rectx + rr->crop);
}
/* tilerect defines drawing offset from (0,0) */
/* however, tilerect (xmin, ymin) is first pixel */
x1 = sima->centx + (rr->tilerect.xmin + rr->crop + xmin)*sima->zoom;
y1 = sima->centy + (rr->tilerect.ymin + rr->crop + ymin)*sima->zoom;
/* needed for gla draw */
// XXX { rcti rct= ar->winrct; rct.ymax-= HEADER_HEIGHT; glaDefine2DArea(&rct);}
glPixelZoom(sima->zoom, sima->zoom);
if(rect32)
glaDrawPixelsSafe(x1, y1, xmax, ymax, rr->rectx, GL_RGBA, GL_UNSIGNED_BYTE, rect32);
else
glaDrawPixelsSafe_to32(x1, y1, xmax, ymax, rr->rectx, rectf, 0);
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
glPixelZoom(1.0, 1.0);
}
/* coming from BIF_toggle_render_display() */
void imagewindow_toggle_render(bContext *C)
{
bScreen *sc= CTX_wm_screen(C);
ScrArea *sa;
/* check if any imagewindow is showing temporal render output */
for(sa=sc->areabase.first; sa; sa= sa->next) {
if(sa->spacetype==SPACE_IMAGE) {
SpaceImage *sima= sa->spacedata.first;
if(sima->image && sima->image->type==IMA_TYPE_R_RESULT)
if(sima->flag & (SI_PREVSPACE|SI_FULLWINDOW))
break;
}
}
if(sa) {
// XXX addqueue(sa->win, ESCKEY, 1); /* also returns from fullscreen */
}
else {
// sa= imagewindow_set_render_display(C);
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
// XXX scrarea_queue_headredraw(sa);
// XXX scrarea_queue_winredraw(sa);
}
}
/* NOTE: called while render, so no malloc allowed! */
2009-01-22 14:59:49 +00:00
static void imagewindow_renderinfo_cb(void *handle, RenderStats *rs)
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
{
if(image_area) {
// XXX BIF_make_render_text(rs);
// XXX sima_draw_render_info(sima, ar);
/* no screen_swapbuffers, prevent any other window to draw */
// XXX myswapbuffers();
}
}
void ED_space_image_render_callbacks(bContext *C, Render *re)
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
{
// RE_display_init_cb(re, C, imagewindow_init_display_cb);
// RE_display_draw_cb(re, C, imagewindow_progress_display_cb);
// RE_display_clear_cb(re, C, imagewindow_clear_display_cb);
RE_stats_draw_cb(re, C, imagewindow_renderinfo_cb);
2.5: Space Image ported back Organized as follows: uvedit/ uv editing related code uvedit_draw.c: drawing code uvedit_ops.c: operators, just a few done uvedit_unwrap_ops.c: will be operators for unwrapping uvedit_paramatrizer.c: lscm/abf/stretch/pack space_image/ space_image.c: registration and common getter/setters image_draw.c: drawing code, mostly functional image_panels.c: panels, all commented out image_render.c: render callbacks, non functional image_ops.c: operators, only view navigation done image_header.c: header, menus mostly done but missing buttons Notes: * Header menus consist only of Operator and RNA buttons, if they are not implemented they're displayed grayed out. Ideally the full header could work like this, but std_libbuttons looks problematic. * Started using view2d code more than the old code, but for now it still does own view2d management due to some very specific requirements that the image window has. The drawing code however is more clear hopefully, it only uses view2d, and there is no switching between 'p' and 'f' view2d's anymore, it is always 'f'. * In order to make uvedit operators more independent I move some image space settings to scene toolsettings, and the current image and its buffer is in the context. Especially sync selection and select mode belonged there anyway as this cannot work correct with different spaces having different settings anyway. * Image paint is not back yet, did not want to put that together with uvedit because there's really no code sharing.. perhaps vertex paint, image paint and sculpt would be good to have in one module to share brush code, partial redraw, etc better.
2009-01-15 04:38:18 +00:00
}