Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
/**
|
|
|
|
|
* $Id$
|
|
|
|
|
*
|
|
|
|
|
* ***** BEGIN GPL/BL DUAL LICENSE BLOCK *****
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
|
* as published by the Free Software Foundation; either version 2
|
|
|
|
|
* of the License, or (at your option) any later version. The Blender
|
|
|
|
|
* Foundation also sells licenses for use in proprietary software under
|
|
|
|
|
* the Blender License. See http://www.blender.org/BL/ for information
|
|
|
|
|
* about this.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
|
|
|
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
|
|
|
*
|
|
|
|
|
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* The Original Code is: all of this file.
|
|
|
|
|
*
|
|
|
|
|
* Contributor(s): none yet.
|
|
|
|
|
*
|
|
|
|
|
* ***** END GPL/BL DUAL LICENSE BLOCK *****
|
|
|
|
|
*/
|
|
|
|
|
#ifndef BUTSPACE_H
|
|
|
|
|
#define BUTSPACE_H
|
|
|
|
|
|
|
|
|
|
/* all internal calls and event codes for buttons space */
|
|
|
|
|
|
|
|
|
|
struct Base;
|
2005-04-16 14:01:49 +00:00
|
|
|
struct Object;
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
struct ID;
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
struct ColorBand;
|
|
|
|
|
struct uiBlock;
|
|
|
|
|
struct rctf;
|
Orange:
- New UI element: the "Curve Button".
For mapping ranges (like 0 - 1) to another range, the curve button can be
used for proportional falloff, bone influences, painting density, etc.
Most evident use is of course to map RGB color with curves.
To be able to use it, you have to allocate a CurveMapping struct and pass
this on to the button. The CurveMapping API is in the new C file
blenkernel/intern/colortools.c
It's as simple as calling:
curvemap= curvemapping_add(3, 0, 0, 1, 1)
Which will create 3 curves, and sets a default 0-1 range. The current code
only supports up to 4 curves maximum per mapping struct.
The CurveMap button in Blender than handles allmost all editing.
Evaluating a single channel:
float newvalue= curvemapping_evaluateF(curvemap, 0, oldval);
Where the second argument is the channel index, here 0-1-2 are possible.
Or mapping a vector:
curvemapping_evaluate3F(curvemap, newvec, oldvec);
Optimized versions for byte or short mapping is possible too, not done yet.
In butspace.c I've added a template wrapper for buttons around the curve, to
reveil settings or show tools; check this screenie:
http://www.blender.org/bf/curves.jpg
- Buttons R, G, B: select channel
- icons + and -: zoom in, out
- icon 'wrench': menu with tools, like clear curve, set handle type
- icon 'clipping': menu with clip values, and to dis/enable clipping
- icon 'x': delete selection
In the curve button itself, only LMB clicks are handled (like all UI elements
in Blender).
- click on point: select
- shift+click on point: swap select
- click on point + drag: select point (if not selected) and move it
- click outside point + drag: translate view
- CTRL+click: add new point
- hold SHIFT while dragging to snap to grid
(Yes I know... either one of these can be Blender compliant, not both!)
- if you drag a point exactly on top of another, it merges them
Other fixes:
- Icons now draw using "Safe RasterPos", so they align with pixel boundary.
the old code made ints from the raster pos coordinate, which doesn't work
well for zoom in/out situations
- bug in Node editing: buttons could not get freed, causing in memory error
prints at end of a Blender session. That one was a very simple, but nasty
error causing me all evening last night to find!
(Hint; check diff of editnode.c, where uiDoButtons is called)
Last note: this adds 3 new files in our tree, I did scons, but not MSVC!
2006-01-08 11:41:06 +00:00
|
|
|
struct CurveMap;
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* buts->scaflag */
|
|
|
|
|
#define BUTS_SENS_SEL 1
|
|
|
|
|
#define BUTS_SENS_ACT 2
|
|
|
|
|
#define BUTS_SENS_LINK 4
|
|
|
|
|
#define BUTS_CONT_SEL 8
|
|
|
|
|
#define BUTS_CONT_ACT 16
|
|
|
|
|
#define BUTS_CONT_LINK 32
|
|
|
|
|
#define BUTS_ACT_SEL 64
|
|
|
|
|
#define BUTS_ACT_ACT 128
|
|
|
|
|
#define BUTS_ACT_LINK 256
|
|
|
|
|
|
|
|
|
|
/* internal */
|
|
|
|
|
|
|
|
|
|
/* scene */
|
|
|
|
|
extern void render_panels(void);
|
|
|
|
|
extern void do_render_panels(unsigned short event);
|
|
|
|
|
extern void anim_panels(void);
|
|
|
|
|
extern void sound_panels(void);
|
2003-10-13 23:46:08 +00:00
|
|
|
extern void do_soundbuts(unsigned short event);
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* object */
|
|
|
|
|
extern void object_panels(void);
|
2005-09-24 15:10:08 +00:00
|
|
|
extern void physics_panels(void);
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
extern void do_object_panels(unsigned short event);
|
2003-10-13 23:46:08 +00:00
|
|
|
extern void do_constraintbuts(unsigned short event);
|
Integration of new IK lib features in Armature Poses.
Best is to forget yesterday's commit and old docs. New docs are underway...
Here's how IK works now;
- IK chains can go all the way to the furthest parent Bone. Disregarding
the old option "IK to Parent" and disgregarding whether a Bone has an
offset to its parent (offsets now work for IK, so you can also make
T-bones).
- The old "IK to Parent" option now only does what it should do: it denotes
whether a Bone is directly connected to a Parent Bone, or not.
In the UI and in code this option is now called "Connected".
- You can also define yourself which Bone will become the "Root" for an IK
chain. This can be any Parent of the IK tip (where the IK constraint is).
By default it goes all the way, unless you set a value for the new IK
Constraint Panel option "Chain Lenght".
- "Tree IK" now is detected automatic, when multiple IK Roots are on the
same Bone, and when there's a branched structure.
Multiple IK's on a single chain (no branches) is still executed as usual,
doing the IK's sequentially.
- Note: Branched structures, with _partial_ overlapping IK chains, that don't
share the same Root will possibly disconnect branches.
- When you select a Bone with IK, it now draws a yellow dashed line to its
Root.
- The IK options "Location Weight" and "Rotation Weight" are relative,
in case there's a Tree IK structure. These weights cannot be set to
zero. To animate or disable IK Targets, use the "Influence" slider.
- This new IK is backwards and upwards compatible for Blender files.
Of course, the new features won't show in older Blender binaries! :)
Other changes & notes;
- In PoseMode, the Constraint Panel now also draws in Editing Buttons, next
to the Bones Panel.
- IK Constraint Panel was redesigned... it's still a bit squished
- Buttons "No X DoF" is now called "Lock X". This to follow convention to
name options positive.
- Added Undo push for Make/Clear Parent in Editmode Armature
- Use CTRL+P "Make Parent" on a single selected Bone to make it become
connected (ALT+P had already "Disconnect").
On todo next; Visualizing & review of Bone DoF limits and stiffness
2005-08-28 12:23:06 +00:00
|
|
|
extern void object_panel_constraint(char *context);
|
The long awaited Particle patch from Janne Karhu
http://www.blender3d.org/cms/New_Particle_options_a.721.0.html
There's no doubt this patch had a lot of good ideas for features, and I
want to compliment Janne again for getting it all to work even!
A more careful review of the features and code did show however quite some
flaws and bugs... partially because the current particle code was very much
polluted already, but also because of the implementation lacked quality.
However, the patch was too good to reject, so I've fixed and recoded the
parts that needed it most. :)
Here's a list of of most evident changes in the patch;
- Guides support recoded. It was implemented as a true 'force field',
checking all Curve path points for each particle to find the closest. Was
just far too slow, and didn't support looping or bends well.
The new implementation is fast (real time) and treats the paths as actual
trajectory for the particle.
- Guides didn't integrate in the physics/speed system either, was added as
exception. Now it's integrated and can be combined with other velocities
or forces
- Use of Fields was slow code in general, made it use a Cache instead.
- The "even" distribution didn't work for Jittered sample patterns.
- The "even" or "vertexgroup" code in the main loops were badly constructed,
giving too much cpu for a simple task. Instead of going over all faces
many times, it now only does it once.
Same part of the code used a lot of temporal unneeded mallocs.
- Use of DerivedMesh or Mesh was confused, didn't work for Subsurfs in all
cases
- Support for vertex groups was slow, evaluating vertexgroups too often
- When a vertexgroup failed to read, it was wrongly handled (set to zero).
VertexGroup support now is with a name.
- Split up the too huge build_particle() call in some parts (moving new code)
- The "texture re-timing" option failed for moving Objects. The old code used
the convention that particles were added with increasing time steps.
Solved by creating a object Matrix Cache.
Also: the texture coordinates had to be corrected to become "OrCo".
- The "Disp" option only was used to draw less particles. Changed it to
actually calculate fewer particles for 3D viewing, but render all still.
So now it can be used to keep editing realtime.
Removed;
The "speed threshold" and "Tight" features were not copied over. This
resembled too much to feature overkill. Needs re-evaluation.
Also the "Deform" option was not added, I prefer to first check if the
current particle system really works for the Modifier system.
And:
- Added integration for particle force fields in the dependency graph
- Added TAB completion for vertexgroup names!
- Made the 'wait cursor' only appear when particles take more than 0.5 sec
- The particle jitter table order now is randomized too, giving much
nicer emitting of particles in large faces.
- Vortex field didn't correctly use speed/forces, so it didn't work for
collisions.
- Triangle distribution was wrong
- Removed ancient bug that applied in a *very* weird way speed and forces.
(location changes got the half force, speed the full...???)
So much... might have forgotten some notes! :)
2005-11-10 16:01:56 +00:00
|
|
|
extern void autocomplete_bone(char *str, void *arg_v);
|
|
|
|
|
extern void autocomplete_vgroup(char *str, void *arg_v);
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
2004-06-26 18:18:11 +00:00
|
|
|
/* effects */
|
|
|
|
|
extern void effects_panels(void);
|
|
|
|
|
extern void do_effects_panels(unsigned short event);
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
2006-04-23 02:34:50 +00:00
|
|
|
/* modifiers */
|
|
|
|
|
extern int mod_moveUp(void *ob_v, void *md_v);
|
|
|
|
|
extern int mod_moveDown(void *ob_v, void *md_v);
|
|
|
|
|
|
2006-05-07 14:57:58 +00:00
|
|
|
/* constraint */
|
|
|
|
|
extern void const_moveUp(void *ob_v, void *con_v);
|
|
|
|
|
extern void const_moveDown(void *ob_v, void *con_v);
|
|
|
|
|
extern void del_constr_func (void *ob_v, void *con_v);
|
|
|
|
|
extern void get_constraint_typestring(char *str, void *con_v);
|
|
|
|
|
extern void get_constraint_ipo_context(void *ob_v, char *actname);
|
|
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
/* editing */
|
|
|
|
|
extern void editing_panels(void);
|
|
|
|
|
extern void do_common_editbuts(unsigned short event);
|
|
|
|
|
extern void do_meshbuts(unsigned short event);
|
2006-09-03 12:16:14 +00:00
|
|
|
extern void do_vgroupbuts(unsigned short event);
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
extern void do_curvebuts(unsigned short event);
|
|
|
|
|
extern void do_fontbuts(unsigned short event);
|
|
|
|
|
extern void do_mballbuts(unsigned short event);
|
|
|
|
|
extern void do_latticebuts(unsigned short event);
|
|
|
|
|
extern void do_fpaintbuts(unsigned short event);
|
The zblur plugin (aka as DoF) integrated in render. Compared to patch
submitted by Alexander, changes/improvements are:
- Moved to new Panel in Scene buttons "Post Effects". Together with other
postprocessing options, such as Edge render. It is also not called DoF,
this because that's a bit pretending too much then. It's a zblur still!
- Made it render Alpha as well
- Made it use and deliver float buffers
- Huge cleanup of zblur.c code, was very messy. It was alling things in render
code without need even (win matrices, transform faces, etc)
- Fixed errors in using Z values (zbuffer is signed int)
- Removed very weird gamma corrections for front/back half
- Tweaked gaussian table, allow variable 'Sigma' to be set for gauss curve
- Didn't copy 'auto focus' yet. Use of this is very limited, and gives
false expectations, nor works for rendering anims with deamons well.
Main issue remains: it's not a very advanced feature... I still doubt
very much if this deserves to be released. Spent 2 days on trying to get
the key issues solved, with not much results.
- gauss filter code has weird side effects on large blur size
- having unsharp (blurred) in front also blurs what's around in back.
only blurred in back with sharp in front works a little bit
- severe aliasing errors... also due the code splitting in 2 halves
- doesnt work with unified yet
- won't work for halos, spot halos or transparant faces
Anyhoo... It was promised to be committed, so now artists can play with it.
Who knows it's useful after all, or some fixes can be implemented. :)
2005-04-23 20:49:23 +00:00
|
|
|
extern void do_cambuts(unsigned short event);
|
2005-08-21 11:26:53 +00:00
|
|
|
extern void do_armbuts(unsigned short event);
|
2006-02-14 11:46:45 +00:00
|
|
|
extern void do_uvcalculationbuts(unsigned short event);
|
2005-08-21 11:26:53 +00:00
|
|
|
|
2005-04-16 14:01:49 +00:00
|
|
|
extern char *get_vertexgroup_menustr(struct Object *ob); // used in object buttons
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* shading */
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
extern void draw_colorband_buts_small(struct uiBlock *block, struct ColorBand *coba, rctf *rct, int event);
|
2003-10-11 00:21:05 +00:00
|
|
|
extern void material_panels(void);
|
- Converted lamp buttons and world buttons, they're pretty!
- menu auto open now is user preset, including 2 thresholds you can set
- hilites of pulldown menus were not cleared, fixed
- changed F4 key to logic. F5 will show lamp buttons, when lamp active
- in 'shader context' buttons, clicking camera will show world
- Converted lamp buttons and world buttons, they're pretty!
- menu auto open now is user preset, including 2 thresholds you can set
- hilites of pulldown menus were not cleared, fixed
- changed F4 key to logic. F5 will show lamp buttons, when lamp active
- in 'shader context' buttons, clicking camera will show world
2003-10-12 13:58:56 +00:00
|
|
|
extern void do_matbuts(unsigned short event);
|
|
|
|
|
extern void lamp_panels(void);
|
|
|
|
|
extern void do_lampbuts(unsigned short event);
|
|
|
|
|
extern void world_panels(void);
|
|
|
|
|
extern void do_worldbuts(unsigned short event);
|
2003-10-12 19:46:17 +00:00
|
|
|
extern void radio_panels(void);
|
|
|
|
|
extern void do_radiobuts(unsigned short event);
|
2003-10-13 14:57:43 +00:00
|
|
|
extern void texture_panels(void);
|
|
|
|
|
extern void do_texbuts(unsigned short event);
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* logic */
|
|
|
|
|
extern void do_logic_buts(unsigned short event);
|
|
|
|
|
extern void logic_buts(void);
|
|
|
|
|
|
2003-10-12 22:26:09 +00:00
|
|
|
/* script */
|
|
|
|
|
extern void script_panels(void);
|
|
|
|
|
extern void do_scriptbuts(unsigned short event);
|
|
|
|
|
|
2003-10-28 14:20:03 +00:00
|
|
|
/* ipowindow */
|
|
|
|
|
extern void do_ipobuts(unsigned short event); // drawipo.c (bad! ton)
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* butspace.c */
|
|
|
|
|
void test_meshpoin_but(char *name, struct ID **idpp);
|
|
|
|
|
void test_obpoin_but(char *name, struct ID **idpp);
|
|
|
|
|
void test_scenepoin_but(char *name, struct ID **idpp);
|
|
|
|
|
void test_matpoin_but(char *name, struct ID **idpp);
|
|
|
|
|
void test_scriptpoin_but(char *name, struct ID **idpp);
|
|
|
|
|
void test_actionpoin_but(char *name, ID **idpp);
|
Orange branch: Revived hidden treasure, the Groups!
Previous experiment (in 2000) didn't satisfy, it had even some primitive
NLA option in groups... so, cleaned up the old code (removed most) and
integrated it back in a more useful way.
Usage:
- CTRL+G gives menu to add group, add to existing group, or remove from
groups.
- In Object buttons, a new (should become first) Panel was added, showing
not only Object "ID button" and Parent, but also the Groups the Object
Belongs to. These buttons also allow rename, assigning or removing.
- To indicate Objects are grouped, they're drawn in a (not theme yet, so
temporal?) green wire color.
- Use ALT+SHIFT mouse-select to (de)select an entire group
But, the real power of groups is in the following features:
-> Particle Force field and Guide control
In the "Particle Motion" Panel, you can indicate a Group name, this then
limits force fields or guides to members of that Group. (Note that layers
still work on top of that... not sure about that).
-> Light Groups
In the Material "Shaders" Panel, you can indicate a Group name to limit
lighting for the Material to lamps in this group. The Lights in a Group do
need to be 'visible' for the Scene to be rendered (as usual).
-> Group Duplicator
In the Object "Anim" Panel, you can set any Object (use Empty!) to
duplicate an entire Group. It will make copies of all Objects in that Group.
Also works for animated Objects, but it will copy the current positions or
deforms. Control over 'local timing' (so we can do Massive anims!) will be
added later.
(Note; this commit won't render Group duplicators yet, a fix in bf-blender
will enable that, next commit will sync)
-> Library Appending
In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed.
By appending or linking the Group itself, and use the Group Duplicator, you
now can animate and position linked Objects. The nice thing is that the
local saved file itself will only store the Group name that was linked, so
on a next file read, the Group Objects will be re-read as stored (changed)
in the Library file.
(Note; current implementation also "gives a base" to linked Group Objects,
to show them as Objects in the current Scene. Need that now for testing
purposes, but probably will be removed later).
-> Outliner
Outliner now shows Groups as optio too, nice to organize your data a bit too!
In General, Groups have a very good potential... for example, it could
become default for MetaBall Objects too (jiri, I can help you later on how
this works). All current 'layer relationships' in Blender should be dropped
in time, I guess...
2005-12-06 10:55:30 +00:00
|
|
|
void test_grouppoin_but(char *name, ID **idpp);
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
void test_texpoin_but(char *name, ID **idpp);
|
Giant commit!
A full detailed description of this will be done later... is several days
of work. Here's a summary:
Render:
- Full cleanup of render code, removing *all* globals and bad level calls
all over blender. Render module is now not called abusive anymore
- API-fied calls to rendering
- Full recode of internal render pipeline. Is now rendering tiles by
default, prepared for much smarter 'bucket' render later.
- Each thread now can render a full part
- Renders were tested with 4 threads, goes fine, apart from some lookup
tables in softshadow and AO still
- Rendering is prepared to do multiple layers and passes
- No single 32 bits trick in render code anymore, all 100% floats now.
Writing images/movies
- moved writing images to blender kernel (bye bye 'schrijfplaatje'!)
- made a new Movie handle system, also in kernel. This will enable much
easier use of movies in Blender
PreviewRender:
- Using new render API, previewrender (in buttons) now uses regular render
code to generate images.
- new datafile 'preview.blend.c' has the preview scenes in it
- previews get rendered in exact displayed size (1 pixel = 1 pixel)
3D Preview render
- new; press Pkey in 3d window, for a panel that continuously renders
(pkey is for games, i know... but we dont do that in orange now!)
- this render works nearly identical to buttons-preview render, so it stops
rendering on any event (mouse, keyboard, etc)
- on moving/scaling the panel, the render code doesn't recreate all geometry
- same for shifting/panning view
- all other operations (now) regenerate the full render database still.
- this is WIP... but big fun, especially for simple scenes!
Compositor
- Using same node system as now in use for shaders, you can composit images
- works pretty straightforward... needs much more options/tools and integration
with rendering still
- is not threaded yet, nor is so smart to only recalculate changes... will be
done soon!
- the "Render Result" node will get all layers/passes as output sockets
- The "Output" node renders to a builtin image, which you can view in the Image
window. (yes, output nodes to render-result, and to files, is on the list!)
The Bad News
- "Unified Render" is removed. It might come back in some stage, but this
system should be built from scratch. I can't really understand this code...
I expect it is not much needed, especially with advanced layer/passes
control
- Panorama render, Field render, Motion blur, is not coded yet... (I had to
recode every single feature in render, so...!)
- Lens Flare is also not back... needs total revision, might become composit
effect though (using zbuffer for visibility)
- Part render is gone! (well, thats obvious, its default now).
- The render window is only restored with limited functionality... I am going
to check first the option to render to a Image window, so Blender can become
a true single-window application. :)
For example, the 'Spare render buffer' (jkey) doesnt work.
- Render with border, now default creates a smaller image
- No zbuffers are written yet... on the todo!
- Scons files and MSVC will need work to get compiling again
OK... thats what I can quickly recall. Now go compiling!
2006-01-23 22:05:47 +00:00
|
|
|
void test_imapoin_but(char *name, ID **idpp);
|
Orange branch: Revived hidden treasure, the Groups!
Previous experiment (in 2000) didn't satisfy, it had even some primitive
NLA option in groups... so, cleaned up the old code (removed most) and
integrated it back in a more useful way.
Usage:
- CTRL+G gives menu to add group, add to existing group, or remove from
groups.
- In Object buttons, a new (should become first) Panel was added, showing
not only Object "ID button" and Parent, but also the Groups the Object
Belongs to. These buttons also allow rename, assigning or removing.
- To indicate Objects are grouped, they're drawn in a (not theme yet, so
temporal?) green wire color.
- Use ALT+SHIFT mouse-select to (de)select an entire group
But, the real power of groups is in the following features:
-> Particle Force field and Guide control
In the "Particle Motion" Panel, you can indicate a Group name, this then
limits force fields or guides to members of that Group. (Note that layers
still work on top of that... not sure about that).
-> Light Groups
In the Material "Shaders" Panel, you can indicate a Group name to limit
lighting for the Material to lamps in this group. The Lights in a Group do
need to be 'visible' for the Scene to be rendered (as usual).
-> Group Duplicator
In the Object "Anim" Panel, you can set any Object (use Empty!) to
duplicate an entire Group. It will make copies of all Objects in that Group.
Also works for animated Objects, but it will copy the current positions or
deforms. Control over 'local timing' (so we can do Massive anims!) will be
added later.
(Note; this commit won't render Group duplicators yet, a fix in bf-blender
will enable that, next commit will sync)
-> Library Appending
In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed.
By appending or linking the Group itself, and use the Group Duplicator, you
now can animate and position linked Objects. The nice thing is that the
local saved file itself will only store the Group name that was linked, so
on a next file read, the Group Objects will be re-read as stored (changed)
in the Library file.
(Note; current implementation also "gives a base" to linked Group Objects,
to show them as Objects in the current Scene. Need that now for testing
purposes, but probably will be removed later).
-> Outliner
Outliner now shows Groups as optio too, nice to organize your data a bit too!
In General, Groups have a very good potential... for example, it could
become default for MetaBall Objects too (jiri, I can help you later on how
this works). All current 'layer relationships' in Blender should be dropped
in time, I guess...
2005-12-06 10:55:30 +00:00
|
|
|
|
2003-10-11 00:21:05 +00:00
|
|
|
void test_idbutton_cb(void *namev, void *arg2_unused);
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
2006-01-30 19:59:33 +00:00
|
|
|
struct CurveMapping;
|
Orange:
- New UI element: the "Curve Button".
For mapping ranges (like 0 - 1) to another range, the curve button can be
used for proportional falloff, bone influences, painting density, etc.
Most evident use is of course to map RGB color with curves.
To be able to use it, you have to allocate a CurveMapping struct and pass
this on to the button. The CurveMapping API is in the new C file
blenkernel/intern/colortools.c
It's as simple as calling:
curvemap= curvemapping_add(3, 0, 0, 1, 1)
Which will create 3 curves, and sets a default 0-1 range. The current code
only supports up to 4 curves maximum per mapping struct.
The CurveMap button in Blender than handles allmost all editing.
Evaluating a single channel:
float newvalue= curvemapping_evaluateF(curvemap, 0, oldval);
Where the second argument is the channel index, here 0-1-2 are possible.
Or mapping a vector:
curvemapping_evaluate3F(curvemap, newvec, oldvec);
Optimized versions for byte or short mapping is possible too, not done yet.
In butspace.c I've added a template wrapper for buttons around the curve, to
reveil settings or show tools; check this screenie:
http://www.blender.org/bf/curves.jpg
- Buttons R, G, B: select channel
- icons + and -: zoom in, out
- icon 'wrench': menu with tools, like clear curve, set handle type
- icon 'clipping': menu with clip values, and to dis/enable clipping
- icon 'x': delete selection
In the curve button itself, only LMB clicks are handled (like all UI elements
in Blender).
- click on point: select
- shift+click on point: swap select
- click on point + drag: select point (if not selected) and move it
- click outside point + drag: translate view
- CTRL+click: add new point
- hold SHIFT while dragging to snap to grid
(Yes I know... either one of these can be Blender compliant, not both!)
- if you drag a point exactly on top of another, it merges them
Other fixes:
- Icons now draw using "Safe RasterPos", so they align with pixel boundary.
the old code made ints from the raster pos coordinate, which doesn't work
well for zoom in/out situations
- bug in Node editing: buttons could not get freed, causing in memory error
prints at end of a Blender session. That one was a very simple, but nasty
error causing me all evening last night to find!
(Hint; check diff of editnode.c, where uiDoButtons is called)
Last note: this adds 3 new files in our tree, I did scons, but not MSVC!
2006-01-08 11:41:06 +00:00
|
|
|
void curvemap_buttons(struct uiBlock *block, struct CurveMapping *cumap, char labeltype, short event, short redraw, struct rctf *rect);
|
|
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
/* -------------- internal event defines ------------ */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define B_DIFF 1
|
|
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_VIEWBUTS 1100
|
|
|
|
|
|
|
|
|
|
#define B_LOADBGPIC 1001
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_BLENDBGPIC 1002
|
|
|
|
|
#define B_BGPICBROWSE 1003
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_BGPICTEX 1004
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_BGPICCLEAR 1005
|
|
|
|
|
#define B_BGPICTEXCLEAR 1006
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
2004-04-06 19:16:14 +00:00
|
|
|
#define B_OBJECTPANELROT 1007
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_OBJECTPANELMEDIAN 1008
|
2003-10-28 16:26:51 +00:00
|
|
|
#define B_ARMATUREPANEL1 1009
|
|
|
|
|
#define B_ARMATUREPANEL2 1010
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_OBJECTPANELPARENT 1011
|
Result of 2 weeks of quiet coding work in Greece :)
Aim was to get a total refresh of the animation system. This
is needed because;
- we need to upgrade it with 21st century features
- current code is spaghetti/hack combo, and hides good design
- it should become lag-free with using dependency graphs
A full log, with complete code API/structure/design explanation
will follow, that's a load of work... so here below the list with
hot changes;
- The entire object update system (matrices, geometry) is now
centralized. Calls to where_is_object and makeDispList are
forbidden, instead we tag objects 'changed' and let the
depgraph code sort it out
- Removed all old "Ika" code
- Depgraph is aware of all relationships, including meta balls,
constraints, bevelcurve, and so on.
- Made depgraph aware of relation types and layers, to do smart
flushing of 'changed' events. Nothing gets calculated too often!
- Transform uses depgraph to detect changes
- On frame-advance, depgraph flushes animated changes
Armatures;
Almost all armature related code has been fully built from scratch.
It now reveils the original design much better, with a very clean
implementation, lag free without even calculating each Bone more than
once. Result is quite a speedup yes!
Important to note is;
1) Armature is data containing the 'rest position'
2) Pose is the changes of rest position, and always on object level.
That way more Objects can use same Pose. Also constraints are in Pose
3) Actions only contain the Ipos to change values in Poses.
- Bones draw unrotated now
- Drawing bones speedup enormously (10-20 times)
- Bone selecting in EditMode, selection state is saved for PoseMode,
and vice-versa
- Undo in editmode
- Bone renaming does vertexgroups, constraints, posechannels, actions,
for all users of Armature in entire file
- Added Bone renaming in NKey panel
- Nkey PoseMode shows eulers now
- EditMode and PoseMode now have 'active' bone too (last clicked)
- Parenting in EditMode' CTRL+P, ALT+P, with nice options!
- Pose is added in Outliner now, with showing that constraints are in
the Pose, not Armature
- Disconnected IK solving from constraints. It's a separate phase now,
on top of the full Pose calculations
- Pose itself has a dependency graph too, so evaluation order is lag free.
TODO NOW;
- Rotating in Posemode has incorrect inverse transform (Martin will fix)
- Python Bone/Armature/Pose API disabled... needs full recode too
(wait for my doc!)
- Game engine will need upgrade too
- Depgraph code needs revision, cleanup, can be much faster!
(But, compliments for Jean-Luc, it works like a charm!)
- IK changed, it now doesnt use previous position to advance to next
position anymore. That system looks nice (no flips) but is not well
suited for NLA and background render.
TODO LATER;
We now can do loadsa new nifty features as well; like:
- Kill PoseMode (can be option for armatures itself)
- Make B-Bones (Bezier, Bspline, like for spines)
- Move all silly button level edit to 3d window (like CTRL+I = add
IK)
- Much better & informative drawing
- Fix action/nla editors
- Put all ipos in Actions (object, mesh key, lamp color)
- Add hooks
- Null bones
- Much more advanced constraints...
Bugfixes;
- OGL render (view3d header) had wrong first frame on anim render
- Ipo 'recording' mode had wrong playback speed
- Vertex-key mode now sticks to show 'active key', until frame change
-Ton-
2005-07-03 17:35:38 +00:00
|
|
|
#define B_OBJECTPANEL 1012
|
|
|
|
|
#define B_ARMATUREPANEL3 1013
|
2006-06-12 20:01:18 +00:00
|
|
|
#define B_OBJECTPANELSCALE 1014
|
|
|
|
|
#define B_OBJECTPANELDIMS 1015
|
2003-10-15 16:01:08 +00:00
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
/* *********************** */
|
|
|
|
|
#define B_LAMPBUTS 1200
|
|
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_LAMPREDRAW 1101
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_COLLAMP 1102
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_TEXCLEARLAMP 1103
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_SBUFF 1104
|
2003-12-16 14:12:01 +00:00
|
|
|
#define B_SHADBUF 1105
|
|
|
|
|
#define B_SHADRAY 1106
|
2005-12-03 12:55:35 +00:00
|
|
|
#define B_LMTEXPASTE 1107
|
|
|
|
|
#define B_LMTEXCOPY 1108
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_MATBUTS 1300
|
|
|
|
|
|
|
|
|
|
#define B_MATCOL 1201
|
|
|
|
|
#define B_SPECCOL 1202
|
|
|
|
|
#define B_MIRCOL 1203
|
|
|
|
|
#define B_ACTCOL 1204
|
|
|
|
|
#define B_MATFROM 1205
|
|
|
|
|
#define B_MATPRV 1206
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
#define B_LAMPPRV 1207
|
|
|
|
|
#define B_WORLDPRV 1208
|
|
|
|
|
#define B_MTEXCOL 1210
|
|
|
|
|
#define B_TEXCLEAR 1211
|
|
|
|
|
#define B_MTEXPASTE 1212
|
|
|
|
|
#define B_MTEXCOPY 1213
|
|
|
|
|
#define B_MATLAY 1214
|
|
|
|
|
#define B_MATHALO 1215
|
|
|
|
|
#define B_MATZTRANSP 1216
|
|
|
|
|
#define B_MATRAYTRANSP 1217
|
|
|
|
|
#define B_MATCOLORBAND 1218
|
|
|
|
|
/* yafray: material preset menu event */
|
|
|
|
|
#define B_MAT_YF_PRESET 1219
|
|
|
|
|
|
|
|
|
|
#define B_MAT_LAYERBROWSE 1220
|
More node goodies!
First note; this is a WIP project, some commits might change things that
make formerly saved situations not to work identically... like now!
------ New Material integration ------
Until now, the Node system worked on top of the 'current' Material, just
like how the Material Layers worked. That's quite confusing in practice,
especially to see what Material is a Node, or what is the "base material"
Best solution is to completely separate the two. This has been implemented
as follows now;
- The confusing "Input" node has been removed.
- When choosing a Material in Blender, you can define this Material to be
either 'normal' (default) or be the root of a Node tree.
- If a Material is a Node tree, you have to add Nodes in the tree to see
something happen. An empty Node tree doesn't do anything (black).
- If a Material is a Node Tree, the 'data browse' menus show it with an
'N' mark before the name. The 'data block' buttons display it with the
suffix 'NT' (instead of 'MA').
- In a Node Tree, any Material can be inserted, including itself. Only in
that case the Material is being used itself for shading.
UI changes:
Added a new Panel "Links", which shows:
- where the Material is linked to (Object, Mesh, etc)
- if the Material is a NodeTree or not
- the actual active Material in the Tree
The "Node" Panel itself now only shows buttons from the other nodes, when
they are active.
Further the Material Nodes themselves allow browsing and renaming or adding
new Materials now too.
Second half of today's work was cleaning up selection when the Nodes
overlap... it was possible to drag links from invisible sockets, or click
headers for invisible nodes, etc. This because the mouse input code was
not checking for visibility yet.
Works now even for buttons. :)
2005-12-29 18:08:01 +00:00
|
|
|
#define B_MAT_USENODES 1221
|
2006-08-09 10:00:27 +00:00
|
|
|
#define B_MAT_VCOL_PAINT 1222
|
|
|
|
|
#define B_MAT_VCOL_LIGHT 1223
|
2005-12-03 12:55:35 +00:00
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
/* *********************** */
|
|
|
|
|
#define B_TEXBUTS 1400
|
|
|
|
|
|
|
|
|
|
#define B_TEXTYPE 1301
|
|
|
|
|
#define B_DEFTEXVAR 1302
|
|
|
|
|
#define B_LOADTEXIMA 1303
|
|
|
|
|
#define B_NAMEIMA 1304
|
|
|
|
|
#define B_TEXCHANNEL 1305
|
|
|
|
|
#define B_TEXREDR_PRV 1306
|
|
|
|
|
#define B_TEXIMABROWSE 1307
|
|
|
|
|
#define B_IMAPTEST 1308
|
|
|
|
|
#define B_RELOADIMA 1309
|
|
|
|
|
#define B_LOADPLUGIN 1310
|
|
|
|
|
#define B_NAMEPLUGIN 1311
|
|
|
|
|
#define B_COLORBAND 1312
|
|
|
|
|
#define B_ADDCOLORBAND 1313
|
|
|
|
|
#define B_DELCOLORBAND 1314
|
|
|
|
|
#define B_CALCCBAND 1315
|
|
|
|
|
#define B_CALCCBAND2 1316
|
|
|
|
|
#define B_DOCOLORBAND 1317
|
|
|
|
|
#define B_REDRAWCBAND 1318
|
|
|
|
|
#define B_BANDCOL 1319
|
|
|
|
|
#define B_LOADTEXIMA1 1320
|
2006-02-19 14:55:16 +00:00
|
|
|
#define B_TEXPRV 1321
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
2003-10-28 14:37:47 +00:00
|
|
|
#define B_PLUGBUT 1325
|
|
|
|
|
/* B_PLUGBUT reserves 24 buttons at least! */
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
#define B_ENV_MAKE 1350
|
|
|
|
|
#define B_ENV_FREE 1351
|
2004-12-03 02:42:21 +00:00
|
|
|
#define B_ENV_DELETE 1352
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_ENV_SAVE 1353
|
|
|
|
|
#define B_ENV_OB 1354
|
|
|
|
|
|
|
|
|
|
#define B_PACKIMA 1355
|
2004-12-03 02:42:21 +00:00
|
|
|
#define B_TEXSETFRAMES 1356
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
2004-12-03 02:42:21 +00:00
|
|
|
#define B_ENV_FREE_ALL 1357
|
|
|
|
|
#define B_UNLINKIMA 1358
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
Orange branch: Revived hidden treasure, the Groups!
Previous experiment (in 2000) didn't satisfy, it had even some primitive
NLA option in groups... so, cleaned up the old code (removed most) and
integrated it back in a more useful way.
Usage:
- CTRL+G gives menu to add group, add to existing group, or remove from
groups.
- In Object buttons, a new (should become first) Panel was added, showing
not only Object "ID button" and Parent, but also the Groups the Object
Belongs to. These buttons also allow rename, assigning or removing.
- To indicate Objects are grouped, they're drawn in a (not theme yet, so
temporal?) green wire color.
- Use ALT+SHIFT mouse-select to (de)select an entire group
But, the real power of groups is in the following features:
-> Particle Force field and Guide control
In the "Particle Motion" Panel, you can indicate a Group name, this then
limits force fields or guides to members of that Group. (Note that layers
still work on top of that... not sure about that).
-> Light Groups
In the Material "Shaders" Panel, you can indicate a Group name to limit
lighting for the Material to lamps in this group. The Lights in a Group do
need to be 'visible' for the Scene to be rendered (as usual).
-> Group Duplicator
In the Object "Anim" Panel, you can set any Object (use Empty!) to
duplicate an entire Group. It will make copies of all Objects in that Group.
Also works for animated Objects, but it will copy the current positions or
deforms. Control over 'local timing' (so we can do Massive anims!) will be
added later.
(Note; this commit won't render Group duplicators yet, a fix in bf-blender
will enable that, next commit will sync)
-> Library Appending
In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed.
By appending or linking the Group itself, and use the Group Duplicator, you
now can animate and position linked Objects. The nice thing is that the
local saved file itself will only store the Group name that was linked, so
on a next file read, the Group Objects will be re-read as stored (changed)
in the Library file.
(Note; current implementation also "gives a base" to linked Group Objects,
to show them as Objects in the current Scene. Need that now for testing
purposes, but probably will be removed later).
-> Outliner
Outliner now shows Groups as optio too, nice to organize your data a bit too!
In General, Groups have a very good potential... for example, it could
become default for MetaBall Objects too (jiri, I can help you later on how
this works). All current 'layer relationships' in Blender should be dropped
in time, I guess...
2005-12-06 10:55:30 +00:00
|
|
|
/* **************** animbuts = object buttons ******* */
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_ANIMBUTS 1500
|
|
|
|
|
|
- added eModifierTypeFlag_RequiresOriginalData for modifiers that
can only follow deform (for example, they store mesh vertex
indices)
- added ModifierType.foreachObjectLink for iterating over Object
links inside modifier data (used for file load, relinking, etc)
- switched various modifiers_ functions to take object argument
instead of ListBase
- added user editable name field to modifiers
- bug fix, duplicate and make single user didn't relink object
pointers in modifier data
- added modifiers to outliner, needs icon
- added armature, hook, and softbody modifiers (softbody doesn't
do anything atm). added conversion of old hooks to modifiers.
NOTE-THE-FIRST: User name field is not initialized on loading 2.38 files
so if you have saved stuff with a cvs blender you will see blank names.
NOTE-THE-SECOND: Since modifiers aren't evaluated yet for non-Mesh
objects, hooks for lattices and curves are broken. Don't updated if
you actually, say, *use* Blender.
NOTE-THE-THIRD: Old hooks used a quirky weighting system during
deformation which can't be extended to modifiers. On the upside,
I doubt anyone relied on the old quirky system and the new system
makes much more sense. (Although the way falloff works is still
quite stupid I think).
2005-08-10 22:05:52 +00:00
|
|
|
#define B_RECALCPATH 1401
|
2004-09-14 19:03:11 +00:00
|
|
|
#define B_TRACKBUTS 1402
|
2003-10-28 14:20:03 +00:00
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_PRINTSPEED 1413
|
|
|
|
|
#define B_PRINTLEN 1414
|
|
|
|
|
#define B_RELKEY 1415
|
2004-09-14 19:03:11 +00:00
|
|
|
#define B_CURVECHECK 1416
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
2005-05-02 13:28:13 +00:00
|
|
|
#define B_SOFTBODY_CHANGE 1420
|
|
|
|
|
#define B_SOFTBODY_DEL_VG 1421
|
|
|
|
|
#define B_SOFTBODY_BAKE 1422
|
|
|
|
|
#define B_SOFTBODY_BAKE_FREE 1423
|
2005-04-02 19:52:32 +00:00
|
|
|
|
Orange branch: Revived hidden treasure, the Groups!
Previous experiment (in 2000) didn't satisfy, it had even some primitive
NLA option in groups... so, cleaned up the old code (removed most) and
integrated it back in a more useful way.
Usage:
- CTRL+G gives menu to add group, add to existing group, or remove from
groups.
- In Object buttons, a new (should become first) Panel was added, showing
not only Object "ID button" and Parent, but also the Groups the Object
Belongs to. These buttons also allow rename, assigning or removing.
- To indicate Objects are grouped, they're drawn in a (not theme yet, so
temporal?) green wire color.
- Use ALT+SHIFT mouse-select to (de)select an entire group
But, the real power of groups is in the following features:
-> Particle Force field and Guide control
In the "Particle Motion" Panel, you can indicate a Group name, this then
limits force fields or guides to members of that Group. (Note that layers
still work on top of that... not sure about that).
-> Light Groups
In the Material "Shaders" Panel, you can indicate a Group name to limit
lighting for the Material to lamps in this group. The Lights in a Group do
need to be 'visible' for the Scene to be rendered (as usual).
-> Group Duplicator
In the Object "Anim" Panel, you can set any Object (use Empty!) to
duplicate an entire Group. It will make copies of all Objects in that Group.
Also works for animated Objects, but it will copy the current positions or
deforms. Control over 'local timing' (so we can do Massive anims!) will be
added later.
(Note; this commit won't render Group duplicators yet, a fix in bf-blender
will enable that, next commit will sync)
-> Library Appending
In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed.
By appending or linking the Group itself, and use the Group Duplicator, you
now can animate and position linked Objects. The nice thing is that the
local saved file itself will only store the Group name that was linked, so
on a next file read, the Group Objects will be re-read as stored (changed)
in the Library file.
(Note; current implementation also "gives a base" to linked Group Objects,
to show them as Objects in the current Scene. Need that now for testing
purposes, but probably will be removed later).
-> Outliner
Outliner now shows Groups as optio too, nice to organize your data a bit too!
In General, Groups have a very good potential... for example, it could
become default for MetaBall Objects too (jiri, I can help you later on how
this works). All current 'layer relationships' in Blender should be dropped
in time, I guess...
2005-12-06 10:55:30 +00:00
|
|
|
/* this has MAX_EFFECT settings! Next free define is 1450... */
|
|
|
|
|
#define B_SELEFFECT 1430
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
2005-09-18 13:27:12 +00:00
|
|
|
/* Fluidsim button defines */
|
2005-10-10 11:31:06 +00:00
|
|
|
#define B_FLUIDSIM_BAKE 1450
|
Sorry for the big commit, but I've been fixing many of these
issues in parallel... So this commit contains: an update of
the solver (e.g. moving objects), integration of blender IPOs,
improved rendering (motion blur, smoothed normals) and a first particle
test. In more detail:
Solver update:
- Moving objects using a relatively simple model, and not yet fully optimized - ok
for box falling into water, water in a moving glass might cause trouble. Simulation
times are influenced by overall no. of triangles of the mesh, scaling meshes up a lot
might also cause slowdowns.
- Additional obstacle settings: noslip (as before), free slip (move along wall freely)
and part slip (mix of both).
- Obstacle settings also added for domain boundaries now, the six walls of the domain are
obstacles after all as well
- Got rid of templates, should make compiling for e.g. macs more convenient,
for linux there's not much difference. Finally got rid of parser (and some other code
parts), the simulation now uses the internal API to transfer data.
- Some unnecessary file were removed, the GUI now needs 3 settings buttons...
This should still be changed (maybe by adding a new panel for domain objects).
IPOs:
- Animated params: viscosity, time and gravity for domains. In contrast
to normal time IPO for Blender objects, the fluidsim one scales the time
step size - so a constant 1 has no effect, values towards 0 slow it down,
larger ones speed the simulation up (-> longer time steps, more compuations).
The viscosity IPO is also only a factor for the selected viscosity (again, 1=no effect).
- For objects that are enabled for fluidsim, a new IPO type shows up. Inflow
objects can use the velocity channels to animate the inflow. Obstacles, in/outflow
objects can be switched on (Active IPO>0) and off (<0) during the simulation.
- Movement, rotation and scaling of those 3 types is exported from the normal
Blender channels (Loc,dLoc,etc.).
Particles:
- This is still experimental, so it might be deactivated for a
release... It should at some point be used to model smaller splashes,
depending on the the realworld size and the particle generation
settings particles are generated during simulation (stored in _particles_X.gz
files).
- These are loaded by enabling the particle field for an arbitrary object,
which should be given a halo material. For each frame, similar to the mesh
loading, the particle system them loads the simulated particle positions.
- For rendering, I "abused" the part->rt field - I couldnt find any use
for it in the code and it seems to work fine. The fluidsim particles
store their size there.
Rendering:
- The fluidims particles use scaled sizes and alpha values to give a more varied
appearance. In convertblender.c fluidsim particle systems use the p->rt field
to scale up the size and down the alpha of "smaller particles". Setting the
influence fields in the fluidims settings to 0 gives equally sized particles
with same alpha everywhere. Higher values cause larger differences.
- Smoothed normals: for unmodified fluid meshes (e.g. no subdivision) the normals
computed by the solver are used. This is basically done by switching off the
normal recalculation in convertblender.c (the function calc_fluidsimnormals
handles other mesh inits instead of calc_vertexnormals).
This could also be used to e.g. modify mesh normals in a modifier...
- Another change is that fluidsim meshes load the velocities computed
during the simulation for image based motion blur. This is inited in
load_fluidsimspeedvectors for the vector pass (they're loaded during the
normal load in DerivedMesh readBobjgz). Generation and loading can be switched
off in the settings. Vector pass currently loads the fluidism meshes 3 times,
so this should still be optimized.
Examples:
- smoothed normals versus normals from subdividing once:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_1smoothnorms.png
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_2subdivnorms.png
- fluidsim particles, size/alpha influence 0:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_3particlesnorm.png
size influence 1:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_4particlessize.png
size & alpha influence 1:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_5particlesalpha.png
- the standard drop with motion blur and particles:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t2new.mpg
(here's how it looks without
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t1old.mpg)
- another inflow animation (moving, switched on/off) with a moving obstacle
(and strong mblur :)
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t3ipos.mpg
Things still to fix:
- rotating & scaling domains causes wrong speed vectors
- get rid of SDL code for threading, use pthreads as well?
- update wiki documentation
- cool effects for rendering would be photon maps for caustics,
and motion blur for particles :)
2006-02-27 11:45:42 +00:00
|
|
|
#define B_FLUIDSIM_SELDIR 1451
|
2005-10-10 11:31:06 +00:00
|
|
|
#define B_FLUIDSIM_FORCEREDRAW 1452
|
Sorry for the big commit, but I've been fixing many of these
issues in parallel... So this commit contains: an update of
the solver (e.g. moving objects), integration of blender IPOs,
improved rendering (motion blur, smoothed normals) and a first particle
test. In more detail:
Solver update:
- Moving objects using a relatively simple model, and not yet fully optimized - ok
for box falling into water, water in a moving glass might cause trouble. Simulation
times are influenced by overall no. of triangles of the mesh, scaling meshes up a lot
might also cause slowdowns.
- Additional obstacle settings: noslip (as before), free slip (move along wall freely)
and part slip (mix of both).
- Obstacle settings also added for domain boundaries now, the six walls of the domain are
obstacles after all as well
- Got rid of templates, should make compiling for e.g. macs more convenient,
for linux there's not much difference. Finally got rid of parser (and some other code
parts), the simulation now uses the internal API to transfer data.
- Some unnecessary file were removed, the GUI now needs 3 settings buttons...
This should still be changed (maybe by adding a new panel for domain objects).
IPOs:
- Animated params: viscosity, time and gravity for domains. In contrast
to normal time IPO for Blender objects, the fluidsim one scales the time
step size - so a constant 1 has no effect, values towards 0 slow it down,
larger ones speed the simulation up (-> longer time steps, more compuations).
The viscosity IPO is also only a factor for the selected viscosity (again, 1=no effect).
- For objects that are enabled for fluidsim, a new IPO type shows up. Inflow
objects can use the velocity channels to animate the inflow. Obstacles, in/outflow
objects can be switched on (Active IPO>0) and off (<0) during the simulation.
- Movement, rotation and scaling of those 3 types is exported from the normal
Blender channels (Loc,dLoc,etc.).
Particles:
- This is still experimental, so it might be deactivated for a
release... It should at some point be used to model smaller splashes,
depending on the the realworld size and the particle generation
settings particles are generated during simulation (stored in _particles_X.gz
files).
- These are loaded by enabling the particle field for an arbitrary object,
which should be given a halo material. For each frame, similar to the mesh
loading, the particle system them loads the simulated particle positions.
- For rendering, I "abused" the part->rt field - I couldnt find any use
for it in the code and it seems to work fine. The fluidsim particles
store their size there.
Rendering:
- The fluidims particles use scaled sizes and alpha values to give a more varied
appearance. In convertblender.c fluidsim particle systems use the p->rt field
to scale up the size and down the alpha of "smaller particles". Setting the
influence fields in the fluidims settings to 0 gives equally sized particles
with same alpha everywhere. Higher values cause larger differences.
- Smoothed normals: for unmodified fluid meshes (e.g. no subdivision) the normals
computed by the solver are used. This is basically done by switching off the
normal recalculation in convertblender.c (the function calc_fluidsimnormals
handles other mesh inits instead of calc_vertexnormals).
This could also be used to e.g. modify mesh normals in a modifier...
- Another change is that fluidsim meshes load the velocities computed
during the simulation for image based motion blur. This is inited in
load_fluidsimspeedvectors for the vector pass (they're loaded during the
normal load in DerivedMesh readBobjgz). Generation and loading can be switched
off in the settings. Vector pass currently loads the fluidism meshes 3 times,
so this should still be optimized.
Examples:
- smoothed normals versus normals from subdividing once:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_1smoothnorms.png
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_2subdivnorms.png
- fluidsim particles, size/alpha influence 0:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_3particlesnorm.png
size influence 1:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_4particlessize.png
size & alpha influence 1:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_5particlesalpha.png
- the standard drop with motion blur and particles:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t2new.mpg
(here's how it looks without
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t1old.mpg)
- another inflow animation (moving, switched on/off) with a moving obstacle
(and strong mblur :)
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t3ipos.mpg
Things still to fix:
- rotating & scaling domains causes wrong speed vectors
- get rid of SDL code for threading, use pthreads as well?
- update wiki documentation
- cool effects for rendering would be photon maps for caustics,
and motion blur for particles :)
2006-02-27 11:45:42 +00:00
|
|
|
#define B_FLUIDSIM_MAKEPART 1453
|
2005-09-18 13:27:12 +00:00
|
|
|
|
2005-12-14 15:58:52 +00:00
|
|
|
#define B_GROUP_RELINK 1460
|
|
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
/* *********************** */
|
|
|
|
|
#define B_WORLDBUTS 1600
|
|
|
|
|
|
|
|
|
|
#define B_TEXCLEARWORLD 1501
|
- Converted lamp buttons and world buttons, they're pretty!
- menu auto open now is user preset, including 2 thresholds you can set
- hilites of pulldown menus were not cleared, fixed
- changed F4 key to logic. F5 will show lamp buttons, when lamp active
- in 'shader context' buttons, clicking camera will show world
- Converted lamp buttons and world buttons, they're pretty!
- menu auto open now is user preset, including 2 thresholds you can set
- hilites of pulldown menus were not cleared, fixed
- changed F4 key to logic. F5 will show lamp buttons, when lamp active
- in 'shader context' buttons, clicking camera will show world
2003-10-12 13:58:56 +00:00
|
|
|
#define B_COLHOR 1502
|
|
|
|
|
#define B_COLZEN 1503
|
2005-12-03 12:55:35 +00:00
|
|
|
#define B_WMTEXPASTE 1504
|
|
|
|
|
#define B_WMTEXCOPY 1505
|
2006-06-30 19:29:57 +00:00
|
|
|
#define B_AO_DISTANCES 1506
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_RENDERBUTS 1700
|
|
|
|
|
|
|
|
|
|
#define B_FS_PIC 1601
|
|
|
|
|
#define B_FS_BACKBUF 1602
|
|
|
|
|
|
|
|
|
|
#define B_FS_FTYPE 1604
|
|
|
|
|
#define B_DORENDER 1605
|
|
|
|
|
#define B_DOANIM 1606
|
|
|
|
|
#define B_PLAYANIM 1607
|
|
|
|
|
#define B_PR_PAL 1608
|
|
|
|
|
#define B_PR_FULL 1609
|
|
|
|
|
#define B_PR_PRV 1610
|
2006-06-17 10:25:07 +00:00
|
|
|
#define B_PR_HD 1611
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_PR_PAL169 1612
|
2006-06-17 10:25:07 +00:00
|
|
|
|
|
|
|
|
#define B_REDRAWDISP 1615
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_SETBROWSE 1616
|
|
|
|
|
#define B_CLEARSET 1617
|
|
|
|
|
#define B_PR_PRESET 1618
|
|
|
|
|
#define B_PR_PANO 1619
|
|
|
|
|
#define B_PR_NTSC 1620
|
|
|
|
|
|
|
|
|
|
#define B_IS_FTYPE 1622
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_IS_BACKBUF 1623
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_PR_PC 1624
|
|
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_PR_PANO360 1627
|
|
|
|
|
#define B_PR_HALFFIELDS 1628
|
|
|
|
|
#define B_NEWRENDERPIPE 1629
|
|
|
|
|
#define B_R_SCALE 1630
|
|
|
|
|
#define B_G_SCALE 1631
|
|
|
|
|
#define B_B_SCALE 1632
|
|
|
|
|
#define B_USE_R_SCALE 1633
|
|
|
|
|
#define B_USE_G_SCALE 1634
|
|
|
|
|
#define B_USE_B_SCALE 1635
|
|
|
|
|
#define B_EDGECOLSLI 1636
|
|
|
|
|
#define B_GAMMASLI 1637
|
|
|
|
|
|
|
|
|
|
#define B_FILETYPEMENU 1638
|
|
|
|
|
#define B_SELECTCODEC 1639
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_RTCHANGED 1640
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_SWITCHRENDER 1641
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
#define B_FBUF_REDO 1642
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
Orange; more render & compo stuff!
-> Rendering in RenderLayers
It's important to distinguish a 'render layer' from a 'pass'. The first is
control over the main pipeline itself, to indicate what geometry is being
is rendered. The 'pass' (not in this commit!) is related to internal
shading code, like shadow/spec/AO/normals/etc.
Options for RenderLayers now are:
- Indicate which 3d 'view layers' have to be included (so you can render
front and back separately)
- "Solid", all solid faces, includes sky at the moment too
- "ZTransp", all transparent faces
- "Halo", the halos
- "Strand", the particle strands (not coded yet...)
Currently only 2 'passes' are exported for render, which is the "Combined"
buffer and the "Z. The latter now works, and can be turned on/off.
Note that all layers are still fully kept in memory now, saving the tiles
and layers to disk (in exr) is also todo.
-> New Blur options
The existing Blur Node (compositor) now has an optional input image. This
has to be a 'value buffer', which can be a Zbuffer, or any mask you can
think of. The input values have to be in the 0-1 range, so another new
node was added too "Map Value".
The value input can also be used to tweak blur size with the (todo)
Time Node.
Temporal screenies:
http://www.blender.org/bf/rt.jpg
http://www.blender.org/bf/rt1.jpg
http://www.blender.org/bf/rt2.jpg
BTW: The compositor is very slow still, it recalulates all nodes on each
change still. Persistant memory and dependency checks is coming!
2006-01-26 22:18:46 +00:00
|
|
|
#define B_SET_EDGE 1643
|
|
|
|
|
#define B_SET_ZBLUR 1644
|
|
|
|
|
#define B_ADD_RENDERLAYER 1645
|
The zblur plugin (aka as DoF) integrated in render. Compared to patch
submitted by Alexander, changes/improvements are:
- Moved to new Panel in Scene buttons "Post Effects". Together with other
postprocessing options, such as Edge render. It is also not called DoF,
this because that's a bit pretending too much then. It's a zblur still!
- Made it render Alpha as well
- Made it use and deliver float buffers
- Huge cleanup of zblur.c code, was very messy. It was alling things in render
code without need even (win matrices, transform faces, etc)
- Fixed errors in using Z values (zbuffer is signed int)
- Removed very weird gamma corrections for front/back half
- Tweaked gaussian table, allow variable 'Sigma' to be set for gauss curve
- Didn't copy 'auto focus' yet. Use of this is very limited, and gives
false expectations, nor works for rendering anims with deamons well.
Main issue remains: it's not a very advanced feature... I still doubt
very much if this deserves to be released. Spent 2 days on trying to get
the key issues solved, with not much results.
- gauss filter code has weird side effects on large blur size
- having unsharp (blurred) in front also blurs what's around in back.
only blurred in back with sharp in front works a little bit
- severe aliasing errors... also due the code splitting in 2 halves
- doesnt work with unified yet
- won't work for halos, spot halos or transparant faces
Anyhoo... It was promised to be committed, so now artists can play with it.
Who knows it's useful after all, or some fixes can be implemented. :)
2005-04-23 20:49:23 +00:00
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
/* *********************** */
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_ARMATUREBUTS 1800
|
2005-11-23 15:20:45 +00:00
|
|
|
#define B_POSE 1701
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_COMMONEDITBUTS 2049
|
|
|
|
|
|
Result of 2 weeks of quiet coding work in Greece :)
Aim was to get a total refresh of the animation system. This
is needed because;
- we need to upgrade it with 21st century features
- current code is spaghetti/hack combo, and hides good design
- it should become lag-free with using dependency graphs
A full log, with complete code API/structure/design explanation
will follow, that's a load of work... so here below the list with
hot changes;
- The entire object update system (matrices, geometry) is now
centralized. Calls to where_is_object and makeDispList are
forbidden, instead we tag objects 'changed' and let the
depgraph code sort it out
- Removed all old "Ika" code
- Depgraph is aware of all relationships, including meta balls,
constraints, bevelcurve, and so on.
- Made depgraph aware of relation types and layers, to do smart
flushing of 'changed' events. Nothing gets calculated too often!
- Transform uses depgraph to detect changes
- On frame-advance, depgraph flushes animated changes
Armatures;
Almost all armature related code has been fully built from scratch.
It now reveils the original design much better, with a very clean
implementation, lag free without even calculating each Bone more than
once. Result is quite a speedup yes!
Important to note is;
1) Armature is data containing the 'rest position'
2) Pose is the changes of rest position, and always on object level.
That way more Objects can use same Pose. Also constraints are in Pose
3) Actions only contain the Ipos to change values in Poses.
- Bones draw unrotated now
- Drawing bones speedup enormously (10-20 times)
- Bone selecting in EditMode, selection state is saved for PoseMode,
and vice-versa
- Undo in editmode
- Bone renaming does vertexgroups, constraints, posechannels, actions,
for all users of Armature in entire file
- Added Bone renaming in NKey panel
- Nkey PoseMode shows eulers now
- EditMode and PoseMode now have 'active' bone too (last clicked)
- Parenting in EditMode' CTRL+P, ALT+P, with nice options!
- Pose is added in Outliner now, with showing that constraints are in
the Pose, not Armature
- Disconnected IK solving from constraints. It's a separate phase now,
on top of the full Pose calculations
- Pose itself has a dependency graph too, so evaluation order is lag free.
TODO NOW;
- Rotating in Posemode has incorrect inverse transform (Martin will fix)
- Python Bone/Armature/Pose API disabled... needs full recode too
(wait for my doc!)
- Game engine will need upgrade too
- Depgraph code needs revision, cleanup, can be much faster!
(But, compliments for Jean-Luc, it works like a charm!)
- IK changed, it now doesnt use previous position to advance to next
position anymore. That system looks nice (no flips) but is not well
suited for NLA and background render.
TODO LATER;
We now can do loadsa new nifty features as well; like:
- Kill PoseMode (can be option for armatures itself)
- Make B-Bones (Bezier, Bspline, like for spines)
- Move all silly button level edit to 3d window (like CTRL+I = add
IK)
- Much better & informative drawing
- Fix action/nla editors
- Put all ipos in Actions (object, mesh key, lamp color)
- Add hooks
- Null bones
- Much more advanced constraints...
Bugfixes;
- OGL render (view3d header) had wrong first frame on anim render
- Ipo 'recording' mode had wrong playback speed
- Vertex-key mode now sticks to show 'active key', until frame change
-Ton-
2005-07-03 17:35:38 +00:00
|
|
|
#define B_CHANGEDEP 2002
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_MATWICH 2003
|
|
|
|
|
#define B_MATNEW 2004
|
|
|
|
|
#define B_MATDEL 2005
|
|
|
|
|
#define B_MATASS 2006
|
|
|
|
|
#define B_MATSEL 2007
|
|
|
|
|
#define B_MATDESEL 2008
|
|
|
|
|
#define B_HIDE 2009
|
|
|
|
|
#define B_REVEAL 2010
|
|
|
|
|
#define B_SELSWAP 2011
|
|
|
|
|
#define B_SETSMOOTH 2012
|
|
|
|
|
#define B_SETSOLID 2013
|
|
|
|
|
#define B_AUTOTEX 2014
|
|
|
|
|
#define B_DOCENTRE 2015
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_DOCENTRENEW 2016
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_DOCENTRECURSOR 2017
|
|
|
|
|
|
2005-09-26 15:34:21 +00:00
|
|
|
/* 20 values! */
|
2005-06-17 21:04:27 +00:00
|
|
|
#define B_OBLAY 2019
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
2005-09-26 15:34:21 +00:00
|
|
|
#define B_ADDKEY 2041
|
|
|
|
|
#define B_SETKEY 2042
|
|
|
|
|
#define B_DELKEY 2043
|
|
|
|
|
#define B_NAMEKEY 2044
|
|
|
|
|
#define B_PREVKEY 2045
|
|
|
|
|
#define B_NEXTKEY 2046
|
|
|
|
|
#define B_LOCKKEY 2047
|
|
|
|
|
|
2006-09-03 12:16:14 +00:00
|
|
|
#define B_MESHBUTS 2090
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
#define B_FLIPNORM 2050
|
|
|
|
|
#define B_SPIN 2051
|
|
|
|
|
#define B_SPINDUP 2052
|
|
|
|
|
#define B_EXTR 2053
|
|
|
|
|
#define B_SCREW 2054
|
|
|
|
|
#define B_EXTREP 2055
|
|
|
|
|
#define B_SPLIT 2056
|
|
|
|
|
#define B_REMDOUB 2057
|
|
|
|
|
#define B_SUBDIV 2058
|
2006-09-03 12:16:14 +00:00
|
|
|
#define B_FRACSUBDIV 2059
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_XSORT 2060
|
|
|
|
|
#define B_HASH 2061
|
|
|
|
|
#define B_DELSTICKY 2062
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_DELVERTCOL 2063
|
|
|
|
|
#define B_MAKE_TFACES 2064
|
2006-09-03 12:16:14 +00:00
|
|
|
#define B_TOSPHERE 2065
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_DEL_TFACES 2066
|
2006-09-03 12:16:14 +00:00
|
|
|
#define B_DECIM_FACES 2067
|
|
|
|
|
#define B_DECIM_CANCEL 2068
|
|
|
|
|
#define B_DECIM_APPLY 2069
|
|
|
|
|
#define B_SLOWERDRAW 2070
|
|
|
|
|
#define B_FASTERDRAW 2071
|
|
|
|
|
#define B_VERTEXNOISE 2072
|
|
|
|
|
#define B_VERTEXSMOOTH 2073
|
|
|
|
|
#define B_MAKESTICKY 2074
|
|
|
|
|
#define B_MAKEVERTCOL 2075
|
|
|
|
|
#define B_CHROMADEPTH 2076
|
|
|
|
|
#define B_DRAWEDGES 2077
|
|
|
|
|
#define B_DRAWCREASES 2078
|
|
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_VGROUPBUTS 2100
|
|
|
|
|
|
|
|
|
|
#define B_NEWVGROUP 2091
|
|
|
|
|
#define B_DELVGROUP 2092
|
|
|
|
|
#define B_ASSIGNVGROUP 2093
|
|
|
|
|
#define B_REMOVEVGROUP 2094
|
|
|
|
|
#define B_SELVGROUP 2095
|
|
|
|
|
#define B_DESELVGROUP 2096
|
|
|
|
|
#define B_AUTOVGROUP 2097
|
|
|
|
|
#define B_LINKEDVGROUP 2098
|
|
|
|
|
|
|
|
|
|
|
2004-07-25 13:36:44 +00:00
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
/* *********************** */
|
|
|
|
|
#define B_CURVEBUTS 2200
|
|
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_CONVERTPOLY 2101
|
|
|
|
|
#define B_CONVERTBEZ 2102
|
|
|
|
|
#define B_CONVERTBSPL 2103
|
|
|
|
|
#define B_CONVERTCARD 2104
|
|
|
|
|
#define B_CONVERTNURB 2105
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_UNIFU 2106
|
|
|
|
|
#define B_ENDPU 2107
|
|
|
|
|
#define B_BEZU 2108
|
|
|
|
|
#define B_UNIFV 2109
|
|
|
|
|
#define B_ENDPV 2110
|
|
|
|
|
#define B_BEZV 2111
|
|
|
|
|
#define B_SETWEIGHT 2112
|
|
|
|
|
#define B_SETW1 2113
|
|
|
|
|
#define B_SETW2 2114
|
|
|
|
|
#define B_SETW3 2115
|
|
|
|
|
#define B_SETORDER 2116
|
|
|
|
|
#define B_MAKEDISP 2117
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_SUBDIVCURVE 2118
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_SPINNURB 2119
|
|
|
|
|
#define B_CU3D 2120
|
|
|
|
|
#define B_SETRESOLU 2121
|
|
|
|
|
#define B_SETW4 2122
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_SUBSURFTYPE 2123
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_FONTBUTS 2300
|
|
|
|
|
|
|
|
|
|
#define B_MAKEFONT 2201
|
|
|
|
|
#define B_TOUPPER 2202
|
|
|
|
|
#define B_SETFONT 2203
|
|
|
|
|
#define B_LOADFONT 2204
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_TEXTONCURVE 2205
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_PACKFONT 2206
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_LOAD3DTEXT 2207
|
2005-06-17 21:04:27 +00:00
|
|
|
#define B_LOREM 2208
|
|
|
|
|
#define B_FASTFONT 2209
|
|
|
|
|
#define B_INSTB 2210
|
|
|
|
|
#define B_DELTB 2211
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_STYLETOSELB 2212
|
|
|
|
|
#define B_STYLETOSELU 2213
|
|
|
|
|
#define B_STYLETOSELI 2214
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
2005-09-19 17:58:51 +00:00
|
|
|
#define B_SETCHAR 2215
|
|
|
|
|
#define B_SETUPCHAR 2216
|
|
|
|
|
#define B_SETDOWNCHAR 2217
|
|
|
|
|
#define B_SETCAT 2218
|
|
|
|
|
#define B_SETUNITEXT 2219
|
2005-09-14 14:02:21 +00:00
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
/* *********************** */
|
2005-08-21 11:26:53 +00:00
|
|
|
#define B_ARMBUTS 2400
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
2005-08-21 11:26:53 +00:00
|
|
|
#define B_ARM_RECALCDATA 2301
|
Three new features:
1) Stride Bone
For walkcycles, you could already set an NLA strip to cycle over a path
based on a preset distance value. This cycling happens based on a linear
interpolation, with constant speed.
Not all cycles have a constant speed however, like hopping or jumping.
To ensure a perfect slipping-less foot contact, you now can set a Bone
in an Armature to define the stride. This "Stride Bone" then becomes a
sort-of ruler, a conveyor belt, on which the character walks. When using
the NLA "Use Path" option, it then tries to keep the Stride Bone entirely
motionless on the path, by cancelling out its motion (for the entire
Armature). This means that the animation keys for a Stride Bone have to be
exactly negative of the desired path. Only, at choice, the X,Y or Z Ipo
curve is used for this stride.
Examples:
http://www.blender.org/bf/0001_0040.avi
The top armature shows the actual Action, the bottom armature has been
parented to a Path, using the Stride Bone feature.
http://www.blender.org/bf/0001_0080.avi
Here the Stride Bone has a number of children, creating a ruler to be
used as reference while animating.
Test .blend:
http://www.blender.org/bf/motionblender1.blend
Notes:
- Note that action keys for Bones work local, based on the Bone's
orientation as set in EditMode. Therefore, an Y translation always
goes in the Bone's direction.
- To be able to get a "solvable" stride, the animation curve has
to be inverse evaluated, using a Newton Raphson root solver. That
means you can only create stride curves that keep moving forward, and
cannot return halfway.
- Set the Stride Bone in the Editing Buttons, Bone Panel. You can set
change the name or set the axis in the NLA Window, Strip Properties Panel.
- Files in this commit will move to the blender.org release section.
2) Armature Ghosting
In EditButtons, Armature Panel, you can set an armature to draw ghosts.
The number value denotes the amount of frames that have to be drawn extra
(for the active action!) around the current frame.
Ghosts only evaluate its own Pose, executing it's Actions, Constraints and
IK. No external dependencies are re-evaluated for it.
3) NLA/Action time control
If you click in the NLA window on the action (linked to Object), it makes
sure the Timing as drawn in the Action editor is not corrected for NLA.
If you also set the Object to "Action", this timing will be executed on the
Object as well (not NLA time).
(It's a bit confusing... will make a good doc & maybe review UI!)
2005-11-01 12:44:30 +00:00
|
|
|
#define B_ARM_STRIDE 2302
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_CAMBUTS 2500
|
|
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_MBALLBUTS 2600
|
|
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_RECALCMBALL 2501
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_LATTBUTS 2700
|
|
|
|
|
|
|
|
|
|
#define B_RESIZELAT 2601
|
|
|
|
|
#define B_DRAWLAT 2602
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_LATTCHANGED 2603
|
|
|
|
|
#define B_REGULARLAT 2604
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_GAMEBUTS 2800
|
|
|
|
|
|
|
|
|
|
#define B_ADD_PROP 2701
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_CHANGE_PROP 2702
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
#define B_ADD_SENS 2703
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_CHANGE_SENS 2704
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_DEL_SENS 2705
|
|
|
|
|
|
|
|
|
|
#define B_ADD_CONT 2706
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_CHANGE_CONT 2707
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_DEL_CONT 2708
|
|
|
|
|
|
|
|
|
|
#define B_ADD_ACT 2709
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_CHANGE_ACT 2710
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_DEL_ACT 2711
|
|
|
|
|
|
|
|
|
|
#define B_SOUNDACT_BROWSE 2712
|
|
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_SETSECTOR 2713
|
|
|
|
|
#define B_SETPROP 2714
|
|
|
|
|
#define B_SETACTOR 2715
|
2004-03-22 22:02:18 +00:00
|
|
|
#define B_SETMAINACTOR 2716
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_SETDYNA 2717
|
2004-03-22 22:02:18 +00:00
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
/* *********************** */
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_FPAINTBUTS 2900
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
#define B_VPCOLSLI 2801
|
|
|
|
|
#define B_VPGAMMA 2802
|
|
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_COPY_TF_MODE 2804
|
|
|
|
|
#define B_COPY_TF_UV 2805
|
|
|
|
|
#define B_COPY_TF_COL 2806
|
|
|
|
|
#define B_REDR_3D_IMA 2807
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_SET_VCOL 2808
|
|
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_COPY_TF_TEX 2814
|
|
|
|
|
#define B_TFACE_HALO 2815
|
|
|
|
|
#define B_TFACE_BILLB 2816
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
#define B_SHOWTEX 2832
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_ASSIGNMESH 2833
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_WEIGHT0_0 2840
|
|
|
|
|
#define B_WEIGHT1_4 2841
|
|
|
|
|
#define B_WEIGHT1_2 2842
|
|
|
|
|
#define B_WEIGHT3_4 2843
|
|
|
|
|
#define B_WEIGHT1_0 2844
|
2005-01-12 22:28:13 +00:00
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_OPA1_8 2845
|
|
|
|
|
#define B_OPA1_4 2846
|
|
|
|
|
#define B_OPA1_2 2847
|
|
|
|
|
#define B_OPA3_4 2848
|
|
|
|
|
#define B_OPA1_0 2849
|
2005-01-12 22:28:13 +00:00
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_CLR_WPAINT 2850
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
2006-07-28 00:56:35 +00:00
|
|
|
#define B_BRUSHBROWSE 2851
|
|
|
|
|
#define B_BRUSHDELETE 2852
|
|
|
|
|
#define B_BRUSHLOCAL 2853
|
|
|
|
|
#define B_BRUSHCHANGE 2854
|
2006-07-31 15:53:03 +00:00
|
|
|
#define B_BTEXBROWSE 2855
|
2006-08-27 13:29:00 +00:00
|
|
|
#define B_BTEXDELETE 2856
|
2006-07-28 00:56:35 +00:00
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
/* *********************** */
|
|
|
|
|
#define B_RADIOBUTS 3000
|
|
|
|
|
|
|
|
|
|
#define B_RAD_GO 2901
|
|
|
|
|
#define B_RAD_INIT 2902
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_RAD_LIMITS 2903
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_RAD_FAC 2904
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_RAD_NODELIM 2905
|
|
|
|
|
#define B_RAD_NODEFILT 2906
|
|
|
|
|
#define B_RAD_FACEFILT 2907
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_RAD_ADD 2908
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_RAD_DELETE 2909
|
|
|
|
|
#define B_RAD_COLLECT 2910
|
|
|
|
|
#define B_RAD_SHOOTP 2911
|
|
|
|
|
#define B_RAD_SHOOTE 2912
|
|
|
|
|
#define B_RAD_REPLACE 2913
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#define B_RAD_DRAW 2914
|
|
|
|
|
#define B_RAD_FREE 2915
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_RAD_ADDMESH 2916
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* *********************** */
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_SCRIPTBUTS 3100
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_SCRIPT_ADD 3001
|
|
|
|
|
#define B_SCRIPT_DEL 3002
|
|
|
|
|
#define B_SCRIPT_TYPE 3003
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* Scene script buttons */
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_SSCRIPT_ADD 3004
|
|
|
|
|
#define B_SSCRIPT_DEL 3005
|
|
|
|
|
#define B_SSCRIPT_TYPE 3006
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_SOUNDBUTS 3200
|
|
|
|
|
enum B_SOUND_BUTTONS {
|
|
|
|
|
B_SOUND_CHANGED = 3101,
|
|
|
|
|
B_SOUND_REDRAW,
|
|
|
|
|
B_SOUND_VOLUME,
|
|
|
|
|
B_SOUND_PANNING,
|
|
|
|
|
B_SOUND_PITCH,
|
|
|
|
|
B_SOUND_LOAD_SAMPLE,
|
|
|
|
|
B_SOUND_MENU_SAMPLE,
|
|
|
|
|
B_SOUND_NAME_SAMPLE,
|
|
|
|
|
B_SOUND_UNLINK_SAMPLE,
|
|
|
|
|
B_SOUND_RELOAD_SAMPLE,
|
|
|
|
|
B_SOUND_UNPACK_SAMPLE,
|
|
|
|
|
B_SOUND_PLAY_SAMPLE,
|
|
|
|
|
B_SOUND_COPY_SOUND,
|
|
|
|
|
B_SOUND_LOOPSTART,
|
|
|
|
|
B_SOUND_LOOPEND,
|
|
|
|
|
B_SOUND_BIDIRECTIONAL,
|
|
|
|
|
B_SOUND_RECALC,
|
|
|
|
|
B_SOUND_RATECHANGED,
|
|
|
|
|
B_SOUND_MIXDOWN
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_CONSTRAINTBUTS 3300
|
|
|
|
|
enum {
|
2005-08-24 20:18:03 +00:00
|
|
|
B_CONSTRAINT_TEST = 3201,
|
2003-10-21 13:22:07 +00:00
|
|
|
B_CONSTRAINT_CHANGETARGET,
|
|
|
|
|
B_CONSTRAINT_ADD_NULL,
|
|
|
|
|
B_CONSTRAINT_ADD_KINEMATIC,
|
|
|
|
|
B_CONSTRAINT_ADD_TRACKTO,
|
2005-09-07 00:11:39 +00:00
|
|
|
B_CONSTRAINT_ADD_MINMAX,
|
2003-10-21 13:22:07 +00:00
|
|
|
B_CONSTRAINT_ADD_ROTLIKE,
|
|
|
|
|
B_CONSTRAINT_ADD_LOCLIKE,
|
2006-02-19 17:42:20 +00:00
|
|
|
B_CONSTRAINT_ADD_SIZELIKE,
|
2003-10-21 13:22:07 +00:00
|
|
|
B_CONSTRAINT_ADD_ACTION,
|
|
|
|
|
B_CONSTRAINT_ADD_LOCKTRACK,
|
2004-03-22 22:02:18 +00:00
|
|
|
B_CONSTRAINT_ADD_FOLLOWPATH,
|
2004-09-05 20:21:16 +00:00
|
|
|
B_CONSTRAINT_ADD_DISTANCELIMIT,
|
2005-10-27 17:37:27 +00:00
|
|
|
B_CONSTRAINT_ADD_STRETCHTO,
|
2006-08-13 14:18:15 +00:00
|
|
|
B_CONSTRAINT_ADD_LOCLIMIT,
|
|
|
|
|
B_CONSTRAINT_ADD_ROTLIMIT,
|
|
|
|
|
B_CONSTRAINT_ADD_SIZELIMIT,
|
2005-10-27 17:37:27 +00:00
|
|
|
B_CONSTRAINT_INF
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
};
|
2004-03-22 22:02:18 +00:00
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
#define B_UVAUTOCALCBUTS 3400
|
|
|
|
|
enum {
|
|
|
|
|
B_UVAUTO_REDRAW = 3301,
|
Added LSCM UV Unwrapping:
http://www.loria.fr/~levy/Galleries/LSCM/index.html
http://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf
Implementation Least Squares Conformal Maps parameterization, based on
chapter 2 of:
Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares
Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002,
July 2002.
Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define
where a mesh will be cut when executing LSCM unwrapping. Seams can be marked
and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark
the selected edges as seams.
Select Linked in Face Select Mode now only selects linked faces if no seams
separate them. So if seams are defined, this will now select the 'face group'
defined by the seams. Hotkey is still LKEY.
LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local
angles). Based on seams, the selected faces will be 'cut'. If multiple
'face groups' are selected, they will be unwrapped separately and packed in
the image rectangle in the UV Editor. Packing uses a simple and fast
algorithm, only designed to avoid having overlapping faces.
LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel.
Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then
executed, these UV's will stay in place, allowing to tweak the solution.
PKEY and ALT+PKEY will respectively pin and unpin selected UV's.
Face Select Mode Drawing Changes:
- Draw Seams option to enable disable drawing of seams
- Draw Faces option to enable drawing of selected faces in transparent purple
- Draw Hidden Edges option to enable drawing of edges of hidden faces
- Draw Edges option to enable drawing of edges of visible faces
The colors for these seams, faces and edges are themeable.
2004-07-13 11:48:52 +00:00
|
|
|
B_UVAUTO_SPHERE,
|
|
|
|
|
B_UVAUTO_CYLINDER,
|
|
|
|
|
B_UVAUTO_CYLRADIUS,
|
|
|
|
|
B_UVAUTO_WINDOW,
|
|
|
|
|
B_UVAUTO_CUBE,
|
|
|
|
|
B_UVAUTO_CUBESIZE,
|
|
|
|
|
B_UVAUTO_STD1,
|
|
|
|
|
B_UVAUTO_STD2,
|
|
|
|
|
B_UVAUTO_STD4,
|
|
|
|
|
B_UVAUTO_STD8,
|
|
|
|
|
B_UVAUTO_BOUNDS1,
|
|
|
|
|
B_UVAUTO_BOUNDS2,
|
|
|
|
|
B_UVAUTO_BOUNDS4,
|
|
|
|
|
B_UVAUTO_BOUNDS8,
|
|
|
|
|
B_UVAUTO_TOP,
|
|
|
|
|
B_UVAUTO_FACE,
|
|
|
|
|
B_UVAUTO_OBJECT,
|
|
|
|
|
B_UVAUTO_ALIGNX,
|
|
|
|
|
B_UVAUTO_ALIGNY,
|
2006-06-24 14:16:36 +00:00
|
|
|
B_UVAUTO_UNWRAP,
|
|
|
|
|
B_UVAUTO_DRAWFACES
|
2004-03-22 22:02:18 +00:00
|
|
|
};
|
2004-06-26 18:18:11 +00:00
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_EFFECTSBUTS 3500
|
2004-06-26 18:18:11 +00:00
|
|
|
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_AUTOTIMEOFS 3403
|
2004-06-26 18:18:11 +00:00
|
|
|
#define B_FRAMEMAP 3404
|
|
|
|
|
#define B_NEWEFFECT 3405
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_PREVEFFECT 3406
|
|
|
|
|
#define B_NEXTEFFECT 3407
|
|
|
|
|
#define B_CHANGEEFFECT 3408
|
|
|
|
|
#define B_CALCEFFECT 3409
|
2004-06-26 18:18:11 +00:00
|
|
|
#define B_DELEFFECT 3410
|
|
|
|
|
#define B_RECALCAL 3411
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_RECALC_DEFL 3412
|
|
|
|
|
#define B_EFFECT_DEP 3413
|
2005-11-04 12:38:46 +00:00
|
|
|
#define B_FIELD_DEP 3414
|
Orange branch: OpenEXR finally in Blender!
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
2006-01-09 00:40:35 +00:00
|
|
|
#define B_FIELD_CHANGE 3415
|
|
|
|
|
#define B_PAF_SET_VG 3416
|
|
|
|
|
#define B_PAF_SET_VG1 3417
|
2004-06-26 18:18:11 +00:00
|
|
|
|
2005-08-04 07:25:43 +00:00
|
|
|
#define B_MODIFIER_BUTS 3600
|
|
|
|
|
|
|
|
|
|
#define B_MODIFIER_RECALC 3501
|
|
|
|
|
#define B_MODIFIER_REDRAW 3502
|
- shuffled editmesh derived function name/function
- added ModifierTypeInfo.freeData function
- added modifier_{new,free] utility function
- added ccgSubSurf_getUseAgeCounts to query info
- removed subsurf modifier faking (ME_SUBSURF flag is no
longer valid). subsurf modifier gets converted on file load
although there is obscure linked mesh situation where this
can go wrong, will fix shortly. this also means that some
places in the code that test/copy subsurf settings are broken
for the time being.
- shuffled modifier calculation to be simpler. note that
all modifiers are currently disabled in editmode (including
subsurf). don't worry, will return shortly.
- bug fix, build modifier didn't randomize meshes with only verts
- cleaned up subsurf_ccg and adapted for future editmode modifier
work
- added editmesh.derived{Cage,Final}, not used yet
- added SubsurfModifierData.{mCache,emCache}, will be used to cache
subsurf instead of caching in derivedmesh itself
- removed old subsurf buttons
- added do_modifiers_buttons to handle modifier events
- removed count_object counting of modifier (subsurfed) objects...
this would be nice to add back at some point but requires care.
probably requires rewrite of counting system.
New feature: Incremental Subsurf in Object Mode
The previous release introduce incremental subsurf calculation during
editmode but it was not turned on during object mode. In general it
does not make sense to have it always enabled during object mode because
it requires caching a fair amount of information about the mesh which
is a waste of memory unless the mesh is often recalculated.
However, for mesh's that have subsurfed armatures for example, or that
have other modifiers so that the mesh is essentially changing on every
frame, it makes a lot of sense to keep the subsurf'd object around and
that is what the new incremental subsurf modifier toggle is for. The
intent is that the user will enable this option for (a) a mesh that is
currently under active editing or (b) a mesh that is heavily updated
in the scene, such as a character.
I will try to write more about this feature for release, because it
has advantages and disadvantages that are not immediately obvious (the
first user reaction will be to turn it on for ever object, which is
probably not correct).
2005-07-21 20:30:33 +00:00
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
/* *********************** */
|
2006-01-28 15:21:04 +00:00
|
|
|
#define B_NODE_BUTS 4000
|
|
|
|
|
/* 400 slots reserved, we want an exec event for each node */
|
|
|
|
|
#define B_NODE_LOADIMAGE 3601
|
|
|
|
|
#define B_NODE_TREE_EXEC 3602
|
|
|
|
|
|
|
|
|
|
/* exec should be last in this list */
|
|
|
|
|
#define B_NODE_EXEC 3610
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
/* BUTTON 4001-4032: layers? (sort this out!) */
|
|
|
|
|
|
|
|
|
|
/* *********************** */
|
|
|
|
|
/* event code 0x4000 (16384) and larger: general events (redraws, etc) */
|
|
|
|
|
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
