By default when moving a edge of the screen it always snaps to an invisible grid with unit of 4 pixels.
This was also affecting the snap to the midpoint and adjacent.
The solution was to make the snap to areagrid optional and use values of `origmin` and `origsize` that match the transformations in screen_edit.c.
* Add horizontal bar at bottom of all non-temp windows, similar to the Top-bar.
* Status-bar is hidden in UI-less fullscreen mode
* Current contents are preliminary and based on T54861:
** Left: Current file-path if needed. "(Modified)" note if file was changed.
** Center: Scene statistics (like in 2.7 Info Editor).
** Right: Progress-bars and reports
* Internally managed as own "STATUSBAR" editor-type (hidden in UI).
* Like with the Top-bar, Status-bar data and SDNA writing is disabled.
* Most changes in low-level screen/area code are to support layout bounds that differ from window bounds.
Design task: T54861
Main changes approved by @brecht.
Regression in recent undo system changes,
This caused T55048.
When each mode had its own undo stack it was important
to initialize it when entering edit-mode.
Dynamically sized regions in the topbar were flickering due to only updating
their size after redraws. Now there is an optional layout() callback for
all regions in an area to do UI layout first, then refresh the region layout,
and then do the actual drawing for each region.
Task T54753
For Blender 2.8 we had to be compatible with very old OpenGL versions, and
triple buffer was designed to work without offscreen rendering, by copying
the the backbuffer to a texture right before swapping. This way we could
avoid redrawing unchanged regions by copying them from this texture on the
next redraws. Triple buffer used to suffer from poor performance and driver
bugs on specific cards, so alternative draw methods remained available.
Now that we require newer OpenGL, we can have just a single draw method
that draw each region into an offscreen buffer, and then draws those to
the screen. This has some advantages:
* Poor 3D view performance when using Region Overlap should be solved now,
since we can also cache overlapping regions in offscreen buffers.
* Page flip, anaglyph and interlace stereo drawing can be a little faster
by avoiding a copy to an intermediate texture.
* The new 3D view drawing already writes to an offscreen buffer, which we
can draw from directly instead of duplicating it to another buffer.
* Eventually we will be able to remove depth and stencil buffers from the
window and save memory, though at the moment there are still some tools
using it so it's not possible yet.
* This also fixes a bug with Eevee sampling not progressing with stereo
drawing in the 3D viewport.
Differential Revision: https://developer.blender.org/D3061
The only real reason we need `butspacetype` is while switching areas, where we
need to delay the actual switch to the RNA _update callback since only there we
can access context.
So instead of trying to sync it with `spacetype`, only set while needed and
unset it afterwards (as in set to `SPACE_EMPTY`).
This should also allow us to re-use `butspacetype` in versioning code when
trying to read removed editors. It'll store the space type value of the removed
editor which we can then use on versioning.
For backwards compatibility, we store `butspacetype` with the value of
`spacetype`.
Requiring context means we can't easily create new editors to replace deprecated
ones in versioning code.
Think it's reasonable to give editors access to scene and area data for their
initial setup though. They mostly need it for setting "the view", as in,
scrolling values.
Also did minor cleanup in top-bar creation function.
* Make bottom half of topbar a bit higher
* Make tabs higher and put them closer together
* Remove screen layouts dropdown, we'll have one layout per window
* Hide action zones from topbar
* Don't change topbar background color when activating
This commit removes all references to the old timeline editor.
Unfortuantely, the removal of the Timeline spacetype defining
functions has ended up breaking the version patching code I'd
been working on earlier (as now, the editor gets marked as
"unknown/info" before we get a chance to patch it!)
== Main Features/Changes for Users
* Add horizontal bar at top of all non-temp windows, consisting out of two horizontal sub-bars.
* Upper sub-bar contains global menus (File, Render, etc.), tabs for workspaces and scene selector.
* Lower sub-bar contains object mode selector, screen-layout and render-layer selector. Later operator and/or tool settings will be placed here.
* Individual sections of the topbar are individually scrollable.
* Workspace tabs can be double- or ctrl-clicked for renaming and contain 'x' icon for deleting.
* Top-bar should scale nicely with DPI.
* The lower half of the top-bar can be hided by dragging the lower top-bar edge up. Better hiding options are planned (e.g. hide in fullscreen modes).
* Info editors at the top of the window and using the full window width with be replaced by the top-bar.
* In fullscreen modes, no more info editor is added on top, the top-bar replaces it.
== Technical Features/Changes
* Adds initial support for global areas
A global area is part of the window, not part of the regular screen-layout.
I've added a macro iterator to iterate over both, global and screen-layout level areas. When iterating over areas, from now on developers should always consider if they have to include global areas.
* Adds a TOPBAR editor type
The editor type is hidden in the UI editor type menu.
* Adds a variation of the ID template to display IDs as tab buttons (template_ID_tabs in BPY)
* Does various changes to RNA button creation code to improve their appearance in the horizontal top-bar.
* Adds support for dynamically sized regions. That is, regions that scale automatically to the layout bounds.
The code for this is currently a big hack (it's based on drawing the UI multiple times). This should definitely be improved.
* Adds a template for displaying operator properties optimized for the top-bar. This will probably change a lot still and is in fact disabled in code.
Since the final top-bar design depends a lot on other 2.8 designs (mainly tool-system and workspaces), we decided to not show the operator or tool settings in the top-bar for now. That means most of the lower sub-bar is empty for the time being.
NOTE: Top-bar or global area data is not written to files or SDNA. They are simply added to the window when opening Blender or reading a file. This allows us doing changes to the top-bar without having to care for compatibility.
== ToDo's
It's a bit hard to predict all the ToDo's here are the known main ones:
* Add options for the new active-tool system and for operator redo to the topbar.
* Automatically hide the top-bar in fullscreen modes.
* General visual polish.
* Top-bar drag & drop support (WIP in temp-tab_drag_drop).
* Improve dynamic regions (should also fix some layout glitches).
* Make internal terminology consistent.
* Enable topbar file writing once design is more advanced.
* Address TODO's and XXX's in code :)
Thanks @brecht for the review! And @sergey for the complaining ;)
Differential Revision: D2758
- Read-only access can often use EvaluationContext.object_mode
- Write access to go to WorkSpace.object_mode.
- Some TODO's remain (marked as "TODO/OBMODE")
- Add-ons will need updating
(context.active_object.mode -> context.workspace.object_mode)
- There will be small/medium issues that still need resolving
this does work on a basic level though.
See D3037
Use dynamically generated message publish/subscribe
so buttons and manipulators update properly.
This resolves common glitches where manipulators weren't updating
as well as the UI when add-ons exposed properties which
hard coded listeners weren't checking for.
Python can also publish/scribe changes via `bpy.msgbus`.
See D2917
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
This is a final step of having proper ownership. Now selecting different
layers in the "top bar" will actually do what this is expected to do.
Surely, there are still things to be done under the hood, that will happen
in a less intrusive way.
While getting rid of Scene->base we got the following fixes:
* Fix "Convert To" operator
* Fix "NLA allowing to selected objects that are not selectable
* Fix scene.objects (readonly, no option to link/unlink)
Note: Collada needs to use the context SceneLayer for adding objects
however I added a placeholder, so Collada maintainers can fix this
properly.
This is a lots of changes, but they are boiling down to a simple API
changes where we are no longer relying on implicit usage of scene's
depsgraph and pass depsgraph explicitly.
There should be no user measurable difference, render_layer* tests
are also passing.
User count of scenes was inconsistant, screens only have 'user_one' kind
of owning over scenes, which means they shall never increment or
decrement their real user count. And usually, scenes have no real user
at all.
There was some invalid state in the screen here, some areas had
sa->full set even though no screen was maximized, which then caused
a restore from the wrong (empty) area, which then led to spacedata
being empty and a crash.
This fix properly clears the sa->full after restore, and also fixes
existing .blend files in such an invalid state.
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
