* Allows moving, rotating & scaling of particle simulations.
* Setting in particle render options.
* Changes viewed & rendered particles from global space to parent space.
* Doesn't effect simulations at all.
Start of planned DerivedMesh refactoring. The mface
interfaces in DerivedMesh have been renamed to reflect
their new status as tesselated face interfaces (rather
then the primary ones, which are now stored in mpolys).
short review: mpolys store "primary" face data, while
mfaces store the tesselated form of the mesh (generally
as triangles). mpolys are defined by mloops, and each
mpoly defines a range of loops it "owns" in the main
mloop array.
I've also added basic read-only face iterators, which
are implemented for CDDM, ccgsubsurf, and the bmeditmesh
derivedmesh. Since faces are now variable-length things,
trying to implement the same interface as mfaces would not
have worked well (especially since faces are stored as
an mpoly + a range of mloops).
I figure first we can evaluate these simple read-only
face iterators, then decide if a) we like using iterators
in DerivedMesh, b) how much of it should use them, and c)
if we want write-capable iterators.
I plan to write official docs on this design after I get
it more stable; I'm committing now because there's a rather
lot of changes, and I might do a merge soon.
-Many things not yet working properly :)
-Experimental new (hopefully more logical) categorization of buttons, feedback on this is very welcome.
-Separate render & draw types, for example now there is actually a render option "halo" instead of all the different point draw types.
-Particles get recalculated only from buttons that actually change something that has to be recalculated, for example changing visualization doesn't reset particles any more.
-Boid physics buttons are still missing as I'm currently redoing the whole boids code.
-Point caching is still very wip, so baking is not possible for example, but I added a few cache baking flags for rna that were/will be needed for particle buttons logic.
* Added material "type" property, with Surface/Volume/Halo
options, compatible with sim_physics, as requested for
material buttons layout. Obviously the Volume setting
does nothing currently.
* Deprecated MA_HALO flag in favor of this.
Text drawing in 3D window fixed, using BLF default font (yes, nice AA'ed
fonts too :)
Solved it by gathering all strings that needs to be drawn for an object,
and then draw in end of object drawing, in pixelspace. Also cleaned up
some of the code for projecting 3d coords, much nicer now (mat stored in
region-view3d)
1) Remove WITH_FREETYPE2 from code, so now blender always need freetype2
2) Remove the old bmfont
3) Remove ftfont and bFTGL library
4) Implement a new BLF_draw_default function for place that still need/use
the old BMF api.
I try to update both, scons and cmake, but I only can test with make, so
hope all work fine.
MSVC is broken, but I don't have Windows, things to search and fix are
any reference to WITH_FREETYPE2, FTGL and BMFONT (take in care that
blenkernel also have a BKE_bmfont.h, this don't have anything to do with bmfont).
Always have to link/include the freetype2 library
Remove any reference to libbmfont
Remove any reference to libftfont
Remove any reference to libbftgl (or libbFTGL)
Using feature XRay + Transparent could crash on undo/redo, the
view3d afterdraw was still storing data here whilst it shouldn't...
Reason was that object got added twice actually... but only freed
once. Also caused weird flashy display.
Notes:
* Sequence transform strip uses G.scene global, this is commented
out now, should be fixed.
* Etch-a-ton code was most difficult to merge. The files already in
2.5 got merged, but no new files were added. Calls to these files
are commented out with "XXX etch-a-ton". editarmature.c and
transform_snap.c were complex to merge. Martin, please check?
* Game engine compiles and links again here for scons/make/cmake
(player still fails to link).
* Image painting back. 2d paint, 3d paint and projection, undo,
pressure, repeating paint operations, etc should all work.
Drawing cursor needs a bit of work, only gets shown when enabling
texture paint mode now.
* Move sculpt, image paint, and vertex/weight paint into a single
sculpt_paint module. Doesn't make much difference now, but nice
to have it together for better integration and consistency in
the future.
Scene browse button now works.
Note that animsys currently executes animation for the entire
database, so multiple scenes in multiple windows don't work yet.
Various fixes:
- crash on invoking filewindow when mouse outside (active) window
- removed obsolete error prints (set screen error, copy data error)
- displist fix for loading files with curve/nurbs, the select-outline
then didnt draw immediately.
- outliner allows scene activating
Edit Mesh:
- Added back "Edge Shortest Path select"
It now also does regular selection, more fun!
It's mapped to CTRL+click now, and makes or clears selections
between current and previously activated edge.
Seam/Sharp/etc marking is a toolsetting mode still. These
options cannot become properties easily, because the tool
uses the properties of selected edge to clear...
- Removed a whole bunch of G.f flags, related to mesh drawing.
It's all now local in me->drawflags. Here's the list of
removed old globals:
G_DRAWEDGES
G_DRAWFACES
G_DRAWNORMALS
G_DRAW_VNORMALS
G_ALLEDGES
G_HIDDENEDGES
G_DRAWCREASES
G_DRAWSEAMS
G_DRAWSHARP
G_DRAWBWEIGHTS
G_DRAW_EDGELEN
G_DRAW_FACEAREA
G_DRAW_EDGEANG
- Brought back code for particle edit and fluidsim
- Sanitized code from globals and bad level calls,
so its ready to come back working.
- Fixed cirle selecting (Ckey now)
- Enabled undo for editmode curve, armature, particle
and lattice
(another commit following)
Font object + editing back.
Was quite some work due to a myriad of globals all over!
Works nicely 100% local now.
To enable a single textedit operator, I've added a new
keymap entry KM_TEXTEDIT, which gives all keyboard events
to the handler. Also had to add a new keymap-add function
to force a keymap handler in beginning of region handlers.
In future this can be used to prioritize handlers.
Also: split off the arrow keys (frame change) to a separate
region level handler. Can be set with default flag in
regiontype->keymapflag ED_KEYMAP_FRAMES
View3D has been split now in a local part (RegionView3D) and a
per-area part (old View3D). Currently local is:
- view transform
- camera zoom/offset
- gpencil (todo)
- custom clipping planes
Rest is in Area still, like active camera, draw type, layers,
localview, custom centers, around-settings, transform widget,
gridlines, and so on (mostly stuff as available in header).
To see it work; also added new feature for region split,
press SHIFT+ALT+CTRL+S for four-split.
The idea is to make a preset 4-split, configured to stick
to top/right/front views for three views.
Another cool idea to explore is to then box-clip all drawing
based on these 3 views.
Note about the code:
- currently view3d still stores some depricated settings, to
convert from older files. Not all settings are copied over
though, like custom clip planes or the 'lock view to object'.
- since some view3d ops are now on area level, the operators
for it should keep track of that.
Bugfix in transform: quat initialize in operator-invoke missed
one zero.
Als brought back GE to compile for missing Ipos and channels.
Finally, here is the basic (functional) prototype of the new animation system which will allow for the infamous "everything is animatable", and which also addresses several of the more serious shortcomings of the old system. Unfortunately, this will break old animation files (especially right now, as I haven't written the version patching code yet), however, this is for the future.
Highlights of the new system:
* Scrapped IPO-Curves/IPO/(Action+Constraint-Channels)/Action system, and replaced it with F-Curve/Action.
- F-Curves (animators from other packages will feel at home with this name) replace IPO-Curves.
- The 'new' Actions, act as the containers for F-Curves, so that they can be reused. They are therefore more akin to the old 'IPO' blocks, except they do not have the blocktype restriction, so you can store materials/texture/geometry F-Curves in the same Action as Object transforms, etc.
* F-Curves use RNA-paths for Data Access, hence allowing "every" (where sensible/editable that is) user-accessible setting from RNA to be animated.
* Drivers are no longer mixed with Animation Data, so rigs will not be that easily broken and several dependency problems can be eliminated. (NOTE: drivers haven't been hooked up yet, but the code is in place)
* F-Curve modifier system allows useful 'large-scale' manipulation of F-Curve values, including (I've only included implemented ones here): envelope deform (similar to lattices to allow broad-scale reshaping of curves), curve generator (polynomial or py-expression), cycles (replacing the old cyclic extrapolation modes, giving more control over this). (NOTE: currently this cannot be tested, as there's not access to them, but the code is all in place)
* NLA system with 'tracks' (i.e. layers), and multiple strips per track. (NOTE: NLA system is not yet functional, as it's only partially coded still)
There are more nice things that I will be preparing some nice docs for soon, but for now, check for more details:
http://lists.blender.org/pipermail/bf-taskforce25/2009-January/000260.html
So, what currently works:
* I've implemented two basic operators for the 3D-view only to Insert and Delete Keyframes. These are tempolary ones only that will be replaced in due course with 'proper' code.
* Object Loc/Rot/Scale can be keyframed. Also, the colour of the 'active' material (Note: this should really be for nth material instead, but that doesn't work yet in RNA) can also be keyframed into the same datablock.
* Standard animation refresh (i.e. animation resulting from NLA and Action evaluation) is now done completely separate from drivers before anything else is done after a frame change. Drivers are handled after this in a separate pass, as dictated by depsgraph flags, etc.
Notes:
* Drivers haven't been hooked up yet
* Only objects and data directly linked to objects can be animated.
* Depsgraph will need further tweaks. Currently, I've only made sure that it will update some things in the most basic cases (i.e. frame change).
* Animation Editors are currently broken (in terms of editing stuff). This will be my next target (priority to get Dopesheet working first, then F-Curve editor - i.e. old IPO Editor)
* I've had to put in large chunks of XXX sandboxing for old animation system code all around the place. This will be cleaned up in due course, as some places need special review.
In particular, the particles and sequencer code have far too many manual calls to calculate + flush animation info, which is really bad (this is a 'please explain yourselves' call to Physics coders!).
- Depricated another bunch of globals; all the totobj,
totmesh, totvert, and so on.
- All code that needs such totals now count it themselves,
these stats were not supposed to be reliable
- Editmesh now stores and manages own totals.
- Todo: make a scene->stats that tracks notifiers.
Bugfix: selecting failed in editmesh, backbuffer stuff was
too late, already using index ranges before it was set.
Another one back: editcurve.c
- removed global editNurb everywhere
(cu->editnurb now has listbase with edit data)
- also added 'active bpoint' and 'active nurb' in
Curve struct
- editmode in/out works, mouse/border select works
- restored three more C files: editlattice, editkey
and editgroup
- editmode lattice working, (mouse select works)
- accidentally removed yesterday 3d cursor drawing
- removed global editLatt entirely now.
Think global, act local!
The old favorite G.scene gone! Man... that took almost 2 days.
Also removed G.curscreen and G.edbo.
Not everything could get solved; here's some notes.
- modifiers now store current scene in ModifierData. This is not
meant for permanent, but it can probably stick there until we
cleaned the anim system and depsgraph to cope better with
timing issues.
- Game engine G.scene should become an argument for staring it.
Didn't solve this yet.
- Texture nodes should get scene cfra, but the current implementation
is too tightly wrapped to do it easily.
From the anti-globalization department:
G.obedit terminated!
Wherever possible, use CTX_data_edit_object(C) to get this
now. It's stored in scene now, and the screen context has
it defined.
- View3D backbuffer select is back ("occlusion select").
It doesn't use the old 'afterqueue' yet, which ensured backbuffers
to draw immediate after swapbuffers. Will with that.
So, editmode mesh is back! :)
At the moment only TABkey works and mouse select, 1 vertex at a
time. More will follow of course.
Note for the devs:
- G.editMesh has been removed, be careful with old code.
- EditMesh now is property of Mesh itself
Although it means unlimited editmodes, for migration purposes we
better stick to 1 "obedit" per scene, which is in Context too
- G.obedit will get removed soon, so use CTX_data_edit_object(C)
Or if you can't, just scene->obedit for now
- Also removed the CTX_data_edit_mesh(), this has no meaning
anymore. EditMesh is not context senstitive anymore, only the
edit-object for time being is.
- Martin: I've already tucked some EditMesh pointer in T and
removed all G.editMesh there.
EditMesh: further cleanup, made derivedmesh itterator functions
work by gathering all related data in local ViewContext struct.
(scene, editmesh, region, view3d, obedit).
Also removed bad inclusion of view3d_intern.h in mesh module.
Editmesh code cleaned and compiling/linking. A whopping
20k lines back! :)
Not that it does stuff... editmode in/out has to be done,
and loads of operators. Also linking/exporting editmesh
calls has to be reviewed.
Also: added a blender_test_break() mechanism in BKE.
Cleanup
- for portablity we can keep the old ugly defines for retrieving
active object, cfra and so on. But, they will use 'scene' not
G.scene.
- fixed code that uses those defines.
- some unused variables/functions removed
All of the view3d drawing code is now 'Context' free.
The idea is:
- ED_region_do_draw() sets and freezes drawing context
- regiontype draw() callback then can pass on other relevant
context stuff as function args.
Also cleaned up the WM opengl wrappers, to mimic opengl state;
no reason to give window pointer anymore.
Drawing code for space_view3d module.
It's still not cleaned, have to check on context usage still.
Also missing is editmodes, armatures, and probably more.
Known issue: splitting to 2nd window gives bad opengl lighting.
Picture for fun:
http://www.blender.org/bf/rt2.jpg
Current stat: brought back almost 10k lines! :)
