- Rename the Curve Parameter node to Spline Parameter.
- Add "Index on Spline" to the node. This output is the index of
the current point on it's parent spline rather than the entrire curve.
Differential Revision: https://developer.blender.org/D13275
Combined view of timeline and preview causes seemingly unpredictable
behavior after some operators have been allowed to run in preview
region.
Disable new features in this combined view, so behavior should be
consistent with previous versions.
ref: https://developer.blender.org/T92584
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D13419
Add flag to `BKE_bpath_traverse_id()` and friends to skip weak
references (see below). This makes a distinction between "this blend
file depends on that file" and "this blend file references that file,
but doesn't directly use its data". This distinction is for the Asset
Bundle install operator, which refuses to copy the blend file when it's
not self-contained.
Weak references are those that are not directly used by the blend file,
but are still present to allow path rewriting. For example, when an
Asset is loaded its originating blend file is saved in
`ID::library_weak_reference`; this reference is purely for deduplication
purposes, and not for actually loading any data.
Reviewed by: mont29, brecht
Differential Revision: https://developer.blender.org/D13412
If strip is removed while proxy is built, this causes crash when
building is finished. This happens because proxy anims are freed in
`SEQ_proxy_rebuild_finish()`.
Iterate over available strips and check if original strip still exists
by comparing `SessionUUID`.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13408
It's important the coordinates the knife is operating on are never
manipulated since it will cause problems which are difficult to
troubleshoot.
Instead, use a cast in the MEM_freeN(..) call.
This reverts commit 8600d4491f.
The Domain Size node has a single geometry input and a selection for
the component type. Based on the component chosen, outputs containing
single values for the related domains are shown.
Mesh:
- Point Count
- Edge Count
- Face Count
- Face Corner Count
Curve:
- Point Count
- Spline Count
Point Cloud:
- Point Count
Instances:
- Instance Count
Differential Revision: https://developer.blender.org/D13365
The crash was caused by allocating an uninitialized amount of memory.
This fix initializes a bunch of variables that could cause the error.
It should be possible to also fix this in the function that actually uses
the uninitialized memory, but that could cause unknown consequences
that are a bit too risky for 3.0. Just initializing some variables should
be safe though. For more details see D13369.
Differential Revision: https://developer.blender.org/D13369
The are few things in the dependency graph which lead to the issue:
- IDs are only built once.
- Object-data level (Armature, i,e,) builder dependent on the object
visibility.
This caused issues when an armature is first built as not directly
visible (via driver, i.e.) and then was built as a directly visible.
This did not update visibility flag on the node for the custom shape
object.
The idea behind the fix is to go away form passing object visibility
flag to the geometry-level builders and instead rely on the common
visibility flush post-processing to make sure certain objects are
fully visible when needed.
This is the safest minimal part of the change for 3.0 release which
acts as an additional way to ensure visibility. This means that it
might not be a complete fix (if some configuration was overseen) but
it should not make currently working cases to not work.
The fix should also make modifiers used on rigify widgets to work.
The more complete fix will have `is_object_visible` argument removed
from the geometry-level builder functions.
Differential Revision: https://developer.blender.org/D13404
Regression since 3.93 caused by 752c6d668b.
Follow the code from 2.93 which was always leaving curve modifiers
evaluation with a valid and clean state of the bounding box.
This is also what was proposed and agreed on in the following
design task: T92206: Bounding Box: compute during depsgraph evaluation
Tested with files from T90808 and T93384.
For the 3.0 going with the safest and minimal change. The rest of
the bounding box un-entanglement is to happen outside of the stable
branch.
Thanks The patch is based on the code from Philipp Oeser and
investigation by Germano Cavalcante and Dr. Sybren A. Stüvel,
thanks!
Differential Revision: https://developer.blender.org/D13409
This patch adds MetalRT support to Cycles kernel code. It is mostly additive in nature or confined to Metal-specific code, however there are a few areas where this interacts with other code:
- MetalRT closely follows the Optix implementation, and in some cases (notably handling of transforms) it makes sense to extend Optix special-casing to MetalRT. For these generalisations we now have `__KERNEL_GPU_RAYTRACING__` instead of `__KERNEL_OPTIX__`.
- MetalRT doesn't support primitive offsetting (as with `primitiveIndexOffset` in Optix), so we define and populate a new kernel texture, `__object_prim_offset`, containing per-object primitive / curve-segment offsets. This is referenced and applied in MetalRT intersection handlers.
- Two new BVH layout enum values have been added: `BVH_LAYOUT_METAL` and `BVH_LAYOUT_MULTI_METAL_EMBREE` for XPU mode). Some host-side enum case handling has been updated where it is trivial to do so.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D13353
This patch adds new arg-type parameters to `DeviceQueue::enqueue` and its overrides. This is in preparation for the Metal backend which needs this information for correct argument encoding.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D13357
Make `ED_preview_id_is_supported(ID *)` NULL-safe. It's semantically
valid, as it's not possible to render a preview of a NULL ID.
The crash was introduced in 481f032f5c
Reviewed By: sybren, jbakker
Maniphest Tasks: T93431
Differential Revision: https://developer.blender.org/D13398
The main goal of this refactor is to make BPath module use `IDTypeInfo`,
and move each ID-specific part of the `foreach_path` looper into their
own IDTypeInfo struct, using a new `foreach_path` callback.
Additionally, following improvements/cleanups are included:
* Attempt to get better, more consistent namings.
** In particular, move from `path_visitor` to more standard `foreach_path`.
* Update and extend documentation.
** API doc was moved to header, according to recent discussions on this
topic.
* Remove `BKE_bpath_relocate_visitor` from API, this is specific
callback that belongs in `lib_id.c` user code.
NOTE: This commit is expected to be 100% non-behavioral-change. This
implies that several potential further changes were only noted as
comments (like using a more generic solution for
`lib_id_library_local_paths`, addressing inconsistencies like path of
packed libraries always being skipped, regardless of the
`BKE_BPATH_FOREACH_PATH_SKIP_PACKED` `eBPathForeachFlag` flag value,
etc.).
NOTE: basic unittests were added to master already in
rBdcc500e5a265093bc9cc.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13381
Currently, nodes with custom sockets do not get their internal links
populated. So operators like Delete And Reconnect don't work with such
nodes. This patch put custom sockets into consideration when computing
priorities for internal links such that sockets of the same idname get
connected. Additionally, the patch cleanup the function in the process
to avoid redundant code repetition.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D13386
Currently, custom sockets are no longer supported for automatic linking
when dropping a node on a link. This is because SOCK_CUSTOM is given a
negative priority and is ignored. To fix this, SOCK_CUSTOM is now given
the lowest priority and the rest of the sockets got their priority
incremented.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D13403
Currently we have a separate `InstancesDataSource`, which does almost
exactly the same thing as `GeometryDataSource`, except that it hardcodes
a few more columns: "Name", "Rotation", and "Scale". We can easily
replace that with a couple of if statements in the geometry data source.
This also makes named attributes on instances display
in the spreadsheet.
Differential Revision: https://developer.blender.org/D13391
Linux distributions are using newer TBB versions than official releases, and
TBB 2021 is an API breaking release.
In general we should avoid using TBB directly and go through the abstractions
in BLI_task.hh, though there is no abstraction for this.
For 3.0 the safe option is to just not cancel the task but instead early out
in the lambda function. Given the grain size of 2048 there should be no
significant performance difference.
Differential Revision: https://developer.blender.org/D13382
This patch gets rid of the O(N^3) complexity
of calculate_vertices. Execution time of the node is
reduced from 250ms to 140ms with 500^3 vertices.
In the future edge calculations could be done manually
and reduce the execution time even further.
Differential Revision: https://developer.blender.org/D13207
Parallelizes the loop that converts splines.
It gives around a 2x speedup on curves with over 1k splines.
Differential Revision: https://developer.blender.org/D13389
The isect_line_sphere algorithm became very imprecise when the line and
the sphere were reasonably far away from the world origin.
This would lead to no intersections being reported even if there was a
guaranteed intersection (line crossing from inside the sphere to the
outside).
To fix this we now use the secant root finding method to get an
intersection point. This is much more stable and robust it seems.
