- Rename the Curve Parameter node to Spline Parameter.
- Add "Index on Spline" to the node. This output is the index of
the current point on it's parent spline rather than the entrire curve.
Differential Revision: https://developer.blender.org/D13275
rB33c5e7bcd5e5b79 doversion code was incorrectly dealing with 'insert in
first position' case from older blendfiles.
Specifically, a NULL anchor is valid (it means that the new item is the
first of the stored override data, and should be inserted at start of
the list).
Reported as part of T93321.
Original implementation was a quick prototype which should have never
landed as-is in master. It had very limiting constraints and did not
allow for any real further development.
This commit fixes the internal implementation to make more sensible,
maintainable and evolutive.
NOTE: This commit introduces another forward-incompatibility in the
Blender file format: Files saved after this commit won't open properly
in older versions of blender regarding local inserted constraints or
modifiers into overrides of linked data.
NOTE: Technical details: The 'anchor' item name/index is now stored in
`subitem_reference_` members, and the actual 'source' item name/index is
stored in `subitem_local_` members of the override property operation
data.
Previously, only the `subitem_local_` members were used, storing the
anchor item name/index, and assuming the 'source' item was always the
next in the list.
Milestone I of T82160.
Maniphest Tasks: T82160
Differential Revision: https://developer.blender.org/D13282
Offsets for meta strip were invalid. No steps to reproduce the issue are
available, but it is quite possible that there are files with incorrect
state after issues with meta strips were fixed.
Ensure correct offsets for meta strips in versioning code.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13257
Now with Geometry Nodes in Blender,
trees can become much bigger than before.
This changes the minimum zoom value in the node editor.
Differential Revision: https://developer.blender.org/D13254
This change was introduced in 997b5fe45d, to not display pixelated
thumbnails. However when VSE timeline height is made smaller, this
limits strip height.
Change limit, so one strip can occupy full height of VSE timeline
There were two issues:
- The third math node socket does not exist in old enough files.
- The comment incorrectly referred to the vector math node.
Differential Revision: https://developer.blender.org/D13219
This reverts commit 6b4ca78108.
A simpler fix was used for 3.0, but rBd845ba481c6d2ef already contained
a more complete solution to the problem of inconsistent socket ids.
Previously, unique identifiers for sockets were created automatically,
sometimes using .001 and sometimes _001. Now they are created
manually with the second format, but some files were saved with .001
format. I think this was only an issue in the vector math node.
rBd845ba481c6d fixed this problem in 3.1, but in a more general way.
After I merge this patch to 3.1, I will revert it, since the versioning
added in that commit will make this redundant.
Differential Revision: https://developer.blender.org/D13209
Previously both `.` and `_` were used as separators when finding
a unique name for a socket. This removes the use of `.`, since `_`
was more common. It also does versioning for all of a file's node
trees to make sure that they all use the `_` convention.
Differential Revision: https://developer.blender.org/D13181
First this was wrong for files written in 2.93 read into blender in 3.0
after the CyclesX merge.
Then this was fixed by versioning in rB6321dd3d4007.
But this caused files written in 3.0 to have this versioning applied as
well (leading to socket shifting).
Now only do the versioning for files created before the CyclesX
merge.
Maniphest Tasks: T92979
Differential Revision: https://developer.blender.org/D13173
CyclesX introduced two new input sockets for the Principled BSDF node in
rB08031197250a. This change is now handled in the versioning code so that
Animation data targeting those sockets are now updated.
Files created with the last Blender release (2.93) or earlier are now
correctly versioned. Files created with 3.0 alpha/beta may need to be
manually updated.
{F11548100, size=full}
To celebrate the beginning of a new series, it feels like the right time to
give the theme a fresh look while improving on what already works.
The aim of this refresh is to keep a familiar look but with polishing touches
here and there. Like new paint on the walls of your well known house.
The theme for Blender 2.8 was well received but presented a few flaws.
* Transparency on menus and tooltips reduce readability
* Mismatch on certain colors, especially outlines of connected widgets
* Active/open menus highlight was not prominent enough
* Header background mismatch in some editors
At the same time we can make use of new features in 3.0:
* Make panels look like panels again (like in v2.3!)
* Make use of roundness in more widgets
* Since nodes are no longer hard-coded to be transparent, tweak opacity and saturation
* Tweak colors for the new dot grid
This update does not include:
* Meshes in edit mode to match greenish object-data color. This needs tweaks in the code to improve contrast.
* A copy of the Blender 2.8x legacy theme. This could be added to the community themes (shouldn't cost much maintenance, I hope)
There will be certainly small tweaks to do here and there, I've been working using this theme
for months but there can be areas that are missing update. The overall style is presented here.
This commit bumps the file subversion.
Reviewed By: #user_interface, Severin
Differential Revision: https://developer.blender.org/D13008
Subdivision surface: Both geometry sockets renamed to "Mesh"
Points to Volume: Use "Points" and "Volume" names
Distribute Points on Faces: Use "Mesh" input name
These are meant to provide a hint to users which type each
node is meant to use.
In future use cases, a volume can contain many grids that represent the
density information. In this case, it's better if the volume to mesh node
creates a mesh based on all of the grids in the volume.
This is also a benefit to share-ability, since one doesn't have to
specify the grid name in the node. Instead, in the future we can have
a way to split particular grids into separate volumes, if only one
grid should be considered.
The code changes are relatively simple:
- Move the old volume to mesh node to the legacy folder.
- Run the volume to mesh node on all instance geometry, like elsewhere.
- Make the blenkernel's volume to mesh API a bit more specific.
Differential Revision: https://developer.blender.org/D12997
The viewer node has been expanded to have a field input next to the
geometry input. When both are connected (by ctrl+shift clicking on a node)
the spreadsheet will show the evaluated field on the geometry.
The operator to link to the viewer has become a bit smarter. It automatically
detects if it should link to the geometry or field input. In the future some more
smartness could be added, such as automatically relinking the "right" geometry
when viewing a field.
Internally, there are two major changes:
* Refactor of what happens when ctrl+shift clicking on a node to link to
a viewer. The behavior of the geometry nodes viewer is a bit more complex
than that of the compositor viewers. The behavior in compositing nodes
should not have changed. Any change should be reported as a bug (and then
we can decide if it's worse than before or if it needs fixing).
* Evaluation, display and caching of fields in the spreadsheet editor.
Differential Revision: https://developer.blender.org/D12938
This replaces the boolean Offset input in the Set Position node with
a vector input. This makes the node easier to use. Using a "Position"
input as an "Offset" sounds wrong anyway.
The Position and Offset inputs are evaluated at the same time.
The versioning only works correctly when the Offset input was not connected
to something else before.
Differential Revision: https://developer.blender.org/D12983
This patch renames the node "String Substring" to "Slice String"
to conform to the "verb first" naming convention.
Default length is also changed to 10 to make it easier for users
to understand what the node does.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12931
Adds a filter popup to the header that allows specifiying which data-block
types to show. The menu automatically reflects all supported ID types, so it
shows a checkbox for materials, worlds and actions currently by default, and
all ID types with the "Extended Asset Browser" experimental feature enabled.
The epsilon was too optimistic. Snapping to hard-coded (0,-1,0) at
singularity should produce max delta 0.0005, but double it to be safe.
This only affects debug builds obviously.
This patch includes code from D9891 and D12754, so credit goes to Juanfran and Dalai.
I updated the patches to work with `master` and with the new overlay toggle.
The reason to include both changes as part of one patch is that the dimmed dashed lines work much better together with colored wires.
Theme setting for dash opacity:
{F11370574, size=full}
{F11286177, size=full, autoplay, loop}
{F11149912, size=full}
For adding the overlay I used `SpaceImageOverlay` as reference, although I'm not familiar with this code so there might be mistakes.
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12886
This commit makes the bounding box node work on each unique geometry
(including instances) individually instead of making one large bounding
box for everything. This makes the node much faster, and is often the
desired result anyway. For the old behavior, a realize instances node
can be used in front of this node (versioning adds it automatically).
The min and max outputs now only output the values from the realized
geometry.
Differential Revision: https://developer.blender.org/D12951
When the input vector gets close to -Y, y and theta becomes totally
unreliable. It is thus necessary to compute the result in a different
way based on x and z. The code already had a special case, but:
- The threshold for using the special case was way too low.
- The special case was not precise enough to extend the threshold.
- The special case math had a sign error, resulting in a jump.
This adds tests for the computation precision and fixes the issues
by adjusting the threshold, and replacing the special case with one
based on a quadratic Taylor expansion of sqrt instead of linear.
Replacing the special case fixes the bug and results in a compatibility
break, requiring versioning for the roll of affected bones.
Differential Revision: https://developer.blender.org/D9551
This commit removes the implicit conversion from points to a mesh
that used to happen before the next modifier. It also removes the
implicit realizing of instances that happened before another modifier.
Now we have specific nodes for both of these operations, the
implicit conversions make less sense, and implicit instance
realizing has already been removed in other nodes.
This adds another geometry nodes modifier before modifiers that would
have realized instances implicitly before. Currently adding another
data-block during versioning after linking means that an assert needs
to be changed. That should be made unnecessary by T92333.
Differential Revision: https://developer.blender.org/D12722
Commit 213554f24a added slope/offset/power controls to the sequencer
color balance modifier, but colors in this mode were not initialized
with old files.
Initialize colors to default values.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12806
There is not enough time before the release to improve Random Walk to handle
all cases this was used for, so restore it for now.
Since there is no more path splitting in cycles-x, this can increase noise in
non-flat areas for the sample number of samples, though fewer rays will be traced
also. This is fundamentally a trade-off we made in the new design and why Random
Walk is a better fit. However the importance resampling we do now does help to
reduce noise.
Differential Revision: https://developer.blender.org/D12800
While drawing cleared this value (as part of temporary fix from 2009),
this was still being checked until recently.
Remove this value in versioning code.
Also clear unused text space flag.
This update of the Switch node allows for field compatible types
to be switched through the node. This includes the following:
Float, Int, Bool, String, Vector, and Color
The remaining types are processed with the orginal code:
Geometry, Object, Collection, Texture, and Material
Because the old types require a diffent "switch" socket than the
field types, versioning for old files is included to move links
of those types to a new switch socket. Once fields of other types
are supported, this node can be updated to support them as well.
Differential Revision: https://developer.blender.org/D12642
