E.g. when opening the File Browser from the Preferences window, it would
be the child of the main window the Preferences belong to. Now it can be
a child of the Preferences window itself.
The File Browser always stays on top of its parent window. Which avoids
some issues with OS window management, see T76418 and T72693.
Also removes a now unnecessary workaround to move the child window back
to the front after closing the file browser (opening the file browser
would move the main window and the file browser to the front).
Fixes T76418, T72693.
Also put glDisable(GL_DITHER) in it since we don't even use it (but is
enabled by default).
Also leave GL_MULTISAMPLE on by default since it has no impact on non-MSAA
framebuffers.
It was sometimes set before reading preferences, now it's passed to GHOST every
time preferences are read.
Differential Revision: https://developer.blender.org/D5641
Splits up wm_xr.c into multiple files in their own folder:
source/blender/windowmanager/xr. So this matches how the message bus and
gizmo code have their own folder and files.
This allows better structuring and should make the code scale better.
I rather do this early on than to wait until we end up with a single,
huge file.
Also improves a bit how data is prepared and updated for drawing.
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
Follow up of b2ee1770d4 and 10c2254d41, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
All DirectX management happens on Ghost level now, higher level code can
just assume everything is OpenGL (except of the upside-down drawing that
still needs to be done for DirectX). This is similar to how the
metal-layer is hidden outside of Ghost.
The Ghost-XR graphics binding for DirectX is responsible for managing
the DirectX compatibility now.
NOTE: While most of the milestone 1 goals are there, a few smaller features and
improvements are still to be done.
Big picture of this milestone: Initial, OpenXR-based virtual reality support
for users and foundation for advanced use cases.
Maniphest Task: https://developer.blender.org/T71347
The tasks contains more information about this milestone.
To be clear: This is not a feature rich VR implementation, it's focused on the
initial scene inspection use case. We intentionally focused on that, further
features like controller support are part of the next milestone.
- How to use?
Instructions on how to use this are here:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/How_to_Test
These will be updated and moved to a more official place (likely the manual) soon.
Currently Windows Mixed Reality and Oculus devices are usable. Valve/HTC
headsets don't support the OpenXR standard yet and hence, do not work with this
implementation.
---------------
This is the C-side implementation of the features added for initial VR
support as per milestone 1. A "VR Scene Inspection" Add-on will be
committed separately, to expose the VR functionality in the UI. It also
adds some further features for milestone 1, namely a landmarking system
(stored view locations in the VR space)
Main additions/features:
* Support for rendering viewports to an HMD, with good performance.
* Option to sync the VR view perspective with a fully interactive,
regular 3D View (VR-Mirror).
* Option to disable positional tracking. Keeps the current position (calculated
based on the VR eye center pose) when enabled while a VR session is running.
* Some regular viewport settings for the VR view
* RNA/Python-API to query and set VR session state information.
* WM-XR: Layer tying Ghost-XR to the Blender specific APIs/data
* wmSurface API: drawable, non-window container (manages Ghost-OpenGL and GPU
context)
* DNA/RNA for management of VR session settings
* `--debug-xr` and `--debug-xr-time` commandline options
* Utility batch & config file for using the Oculus runtime on Windows.
* Most VR data is runtime only. The exception is user settings which are saved
to files (`XrSessionSettings`).
* VR support can be disabled through the `WITH_XR_OPENXR` compiler flag.
For architecture and code documentation, see
https://wiki.blender.org/wiki/Source/Interface/XR.
---------------
A few thank you's:
* A huge shoutout to Ray Molenkamp for his help during the project - it would
have not been that successful without him!
* Sebastian Koenig and Simeon Conzendorf for testing and feedback!
* The reviewers, especially Brecht Van Lommel!
* Dalai Felinto for pushing and managing me to get this done ;)
* The OpenXR working group for providing an open standard. I think we're the
first bigger application to adopt OpenXR. Congratulations to them and
ourselves :)
This project started as a Google Summer of Code 2019 project - "Core Support of
Virtual Reality Headsets through OpenXR" (see
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Some further information, including ideas for further improvements can be found
in the final GSoC report:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/Final_Report
Differential Revisions: D6193, D7098
Reviewed by: Brecht Van Lommel, Jeroen Bakker
Steps to reproduce were:
* Disable tool settings region in 3D View (View > Tool Settings)
* Split the 3D View and drag all the way down
The removed code doesn't seem to be needed anymore. Tested this on hiDPI
too, seems fine.
These kind of fixes are always tricky, so I wouldn't be surprised if
there are any issues caused by this.
Part of https://developer.blender.org/T74429.
There's a chance that this causes some issues becaue in some cases we
change from getting the window from context to getting it from somewhere
else.
* Missing close dialog displayed to warn about unsaved changes.
* No reaction when the file was opened on a different desktop.
Differential Revision: https://developer.blender.org/D6765
Removing meaningless distinction between NULL pointer and EVT_TABLET_NONE,
and initialize pressure and tilt to 1.0 and 0.0 respectively when no tablet
is used.
Simply loading factory settings and dragging an area separator
immediately after would cause an assert because of these invalid sizes.
Seems that since rB07499c04f612 we correctly initialize DPI related
UserPref values with 0, which caused DPI dependant initialization of
global areas to set ScrArea.global.size_min/max to 0 too.
This commit adds a new command line argument --debug-ghost and
makes it so X11 errors happening during context initialization
are only printed when this new flag is sued.
There is no need to flood users with errors when their GPU is
not supporting latest OpenGL version. Or, at a very minimum,
the error must be more meaning full.
Differential Revision: https://developer.blender.org/D6057
Adds a check when starting blender if your platform is supported. We use a blacklist
as drivers are updated more regular then blender (stable releases).
The mechanism detects if the support level changed or has been validated by the user previously.
Changes can happen due to users updating their drivers, but also when we change the support
level in our code base.
When the user has seen the limited support level message it is saved in the user config.
It would be better to have a system specific config section, but currently not clear
what could benefit from that.
When the platform is unsupported or has limited support a dialog box will appear including a link
to our user manual describing what to do.
**Windows**
Windows uses the MessageBox that is provided by the windows kernel.
**X11**
We use a very lowlevel messagebox for X11. It is very limited in use and can be fine tuned when needed.
**SDL/APPLE**
There is no implementation for SDL or APPLE at this moment as the platform support feature targets mostly Windows users.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5955
For many users, this will make the File Browser window behave more like
what they would expect. It addresses the issue of the File Browser
becoming hidden behind the main window by clicking anywhere in the
latter. It communicates the interruptive, but temporary nature of the
operation a bit better.
Further, on tiling window managers the File Browser now opens as
floating by default, like in other applications.
Note that this also makes sure the File Browser is always opened as
separate window, so it doesn't re-use the Preferences, or any other
temporary window anymore. This seems to have been a common annoyance.
More concretely, this makes the File Browser window behave as follows:
* Stays on top of its parent Blender window, but not on top of
non-Blender windows.
* Minimizes with its parent window
* Can be moved independently
* Doesn't add an own item in task bars
* Doesn't block other Blender windows (we may want to have this though)
* Opens as floating window for tiling window managers (e.g. i3wm/Sway)
Further notes:
* When opening a file browser from the Preference window (or any
temporary window), the main window, as the file browsers parent is
moved on top of the Preferences, which makes it seem like the
Preferences were closed. This is the general issue of bad secondary
window handling as window activation changes. I made it so that the
window is moved back once the file browser is closed.
This behavior is confusing and would be nice to avoid. It's a separate
issue though.
* On most window managers on Linux the temporary window can not be
minimized and maximized, they disable that for dialog windows.
* On Windows and macOS, only minimizing is disabled, as there is no
decent way yet to restore a window if it's not shown in the taskbar.
Reviewed By: Brecht van Lommel, Campbell Barton, William Reynish
Edits and macOS implementation by Brecht.
Differential Revision: https://developer.blender.org/D5810
Part of T69652.
There was a mix of old and new constants. Now have one list of WM_CURSOR_*
cursor types, using GHOST standard cursors when available and otherwise falling
back to our custom cursors.
Ref D5197
This is a general redesign of the File Browser GUI and interaction
methods. For screenshots, check patch D5601.
Main changes in short:
* File Browser as floating window
* New layout of regions
* Popovers for view and filter options
* Vertical list view with interactive column header
* New and updated icons
* Keymap consistency fixes
* Many tweaks and fixes to the drawing of views
----
General:
* The file browser now opens as temporary floating window. It closes on
Esc. The header is hidden then.
* When the file browser is opened as regular editor, the header remains
visible.
* All file browser regions are now defined in Python (the button
layout).
* Adjusted related operator UI names.
Keymap:
Keymap is now consistent with other list-based views in Blender, such as
the Outliner.
* Left click to select, double-click to open
* Right-click context menus
* Shift-click to fill selection
* Ctrl-click to extend selection
Operator options:
These previously overlapped with the source list, which caused numerous
issues with resizing and presenting many settings in a small panel area.
It was also generally inconsistent with Blender.
* Moved to new sidebar, which can easily be shown or hidden using a
prominent Options toggle.
* IO operators have new layouts to match this new sidebar, using
sub-panels. This will have to be committed separately (Add-on
repository).
* If operators want to show the options by default, they have the option
to do so (see `WM_FILESEL_SHOW_PROPS`, `hide_props_region`), otherwise
they are hidden by default.
General Layout:
The layout has been changed to be simpler, more standard, and fits
better in with Blender 2.8.
* More conventional layout (file path at top, file name at the bottom,
execute/cancel buttons in bottom right).
* Use of popovers to group controls, and allow for more descriptive
naming.
* Search box is always live now, just like Outliner.
Views:
* Date Modified column combines both date and time, also uses user
friendly strings for recent dates (i.e. "Yesterday", "Today").
* Details columns (file size, modification date/time) are now toggleable
for all display types, they are not hardcoded per display type.
* File sizes now show as B, KB, MB, ... rather than B, KiB, MiB, … They
are now also calculated using base 10 of course.
* Option to sort in inverse order.
Vertical List View:
* This view now used a much simpler single vertical list with columns
for information.
* Users can click on the headers of these columns to order by that
category, and click again to reverse the ordering.
Icons:
* Updated icons by Jendrzych, with better centering.
* Files and folders have new icons in Icon view.
* Both files and folders have reworked superimposed icons that show
users the file/folder type.
* 3D file documents correctly use the 3d file icon, which was unused
previously.
* Workspaces now show their icon on Link/Append - also when listed in
the Outliner.
Minor Python-API breakage:
* `bpy.types.FileSelectParams.display_type`: `LIST_SHORT` and
`LIST_LONG` are replaced by `LIST_VERTICAL` and `LIST_HORIZONTAL`.
Removes the feature where directories would automatically be created if
they are entered into the file path text button, but don't exist. We
were not sure if users use it enough to keep it. We can definitely bring
it back.
----
//Combined effort by @billreynish, @harley, @jendrzych, my university
colleague Brian Meisenheimer and myself.//
Differential Revision: https://developer.blender.org/D5601
Reviewers: Brecht, Bastien
Note: Although this fixes the issue (as in, it prevents a crash)
BKE_reports are not working because of CTX_wm_window_set().
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5210
Separate temporary windows, like Preferences, should be restored (if minimized) before bringing to top
Differential Revision: https://developer.blender.org/D5105
Reviewed by Brecht Van Lommel
