- while sampling color in image window, you now get the sampled color as a line
drawn in the node editor Curve nodes, allowing quicker view of what values you
actually change.
- reverted temporary the patch [#6779] by Matthew Plough
He replaced image drawing of backdrop-node-editor with our Texture drawing
function. That call is extremely slow, and should be by definition slower
than glDrawPixels (unless you don't upload the image each time to gfx mem).
Drawing large frames (2k, 4k) in node editor became unacceptable slow, even
with the neatest hardware around. (tested nvidia, ati)
Probably (Campbell thinks) this is a bypass for Linux ATI cards?
Anyhoo, this should be investigated further before applying. It better then
becomes a user pref, or even much better: part of the OpenGL profiler we need.
This commit makes it possible to add a custom name to a node. The feature can be
accessed either by using a menu or shortcut ctrl-r. It currently works only when
a single node is selected. Invoking the feature gives a popup menu in which a new
name can be entered. If the given name is not empty, it will be shown like
"(myCustomName) NodeName" in the node header.
This feature is particularly useful when documenting complex node setups.
I also fixed the size of blur node. It was too short before due to my previous
commit.
Thanks to David Millan Escriva for contribution!
This commit alters the behaviour of "Toggle Link" tool found in the node
editor so that it only makes link between selected sockets. Links cannot
be deleted by using the tool again as before. Instead deleting links can
be done by using the old method (drag with lmb).
The delete functionality may require further investigation to see if it
should be improved.
This commit adds a new tool, Toggle Links, to the node editor. This tool
allows the user to toggle the status (linked/not linked) between desired
sockets. The tool can be used either by using the f key or the menus.
This functionality is analogue to one found in object editing modes except
for its additional toggle functionality.
To use this tool, the user has to first select an input and an output socket.
Selecting is done by clicking with right mouse button on a socket. After the
tool has been invoked, the link between those two sockets is toggled. The
result may vary based on existing linkage.
There can be only one input and one output selected at maximum in a node
tree. This means that if the user selects a socket while one of the same
type is already selected, the old one will be deselected.
The tool complements the current way of connecting nodes. One possible use
for it is to use it to review output of nodes by using a viewer node. Just
select wanted input socket of a viewer node, set it visible and use selection
of an output socket in conjuction with f key to show the output in the viewer
node. Select another output and hit f to see its output and so on.
Previously when deleting a scene, no checks were made to see if
any render layer nodes in other scenes were referencing them,
leaving them pointing to bad memory. Now, this checks all other
scenes' nodetrees and sets pointers to the to-be-deleted scene to
NULL, which gets taken care of elsewhere.
Please read:
http://www.blender3d.org/cms/Imaging.834.0.html
Or in short:
- adding MultiLayer Image support
- recoded entire Image API
- better integration of movie/sequence Images
Was a whole load of work... went down for a week to do this. So, will need
a lot of testing! Will be in irc all evening.
- Removed stupid idea to insert convertor nodes in Node Shaders, when a
link is created by non-matching sockets. Now it works like Compositor,
doing a default conversion. Works like this:
1 from 3 or 4 values: take average
3 from 1: copy to all
3 from 4: copy 3
4 from 1: copy to 3, set alpha to 1
4 from 3: copy 3, set alpha to 1
- Added select-linked in Nodes. Lkey or Shift+L. Also in pulldown menus
- from all selected nodes
- only connections between highest order socket types; so if there's RGBA
and Value sockets, only RGBA sockets are connected. This because in
these cases the Value sockets usually are for user input.
Example: Mix node.
Thanks Trip for the hint!
naming convention for Compositing:
- Render Result node -> Render Layers node (name only appears in Add menu)
- Compositor image -> Viewer Node image
I've also added a version patch (2.41 saved files only) to rename existing
"Compositor" Images.
- removed "Unified" button, replaced with "HD" preset for 1920x1080 output
- removed the unused "Pass" options
- removed the unused "Strands" render-layer option
Because the internal render pipe supports this already; added two more
render-layer options:
- "Sky", to enable/disable sky render in a layer (this was part of "Solid"
before, not so correct... to ensure previously saved files work, the
"Sky" option is set by default when "Solid" was set. The version patching
will do this temporally always, until we've bumped up version to 2.42
- "Edge", to enable/disable edge render in a layer. Nice for compositing.
Also in this commit: fixed warnings for exported functions for the new
Node Editor pull-down menus.
extern/bullet/BulletDynamics/ConstraintSolver/SimpleConstraintSolver.h
added newline at end of file.
intern/boolop/intern/BOP_Face2Face.cpp
fixed indentation and had nested declarations of a varible i used
for multiple for loops, changed it to just one declaration.
source/blender/blenkernel/bad_level_call_stubs/stubs.c
added prototypes and a couple other fixes.
source/blender/include/BDR_drawobject.h
source/blender/include/BSE_node.h
source/blender/include/butspace.h
source/blender/render/extern/include/RE_shader_ext.h
added struct definitions
source/blender/src/editmesh_mods.c
source/gameengine/Ketsji/KX_BlenderMaterial.cpp
source/gameengine/Ketsji/KX_ConvertPhysicsObjects.cpp
source/gameengine/Ketsji/KX_RaySensor.cpp
removed unused variables;
source/gameengine/GameLogic/Joystick/SCA_Joystick.cpp
changed format of case statements to avoid warnings in gcc.
Kent
A full detailed description of this will be done later... is several days
of work. Here's a summary:
Render:
- Full cleanup of render code, removing *all* globals and bad level calls
all over blender. Render module is now not called abusive anymore
- API-fied calls to rendering
- Full recode of internal render pipeline. Is now rendering tiles by
default, prepared for much smarter 'bucket' render later.
- Each thread now can render a full part
- Renders were tested with 4 threads, goes fine, apart from some lookup
tables in softshadow and AO still
- Rendering is prepared to do multiple layers and passes
- No single 32 bits trick in render code anymore, all 100% floats now.
Writing images/movies
- moved writing images to blender kernel (bye bye 'schrijfplaatje'!)
- made a new Movie handle system, also in kernel. This will enable much
easier use of movies in Blender
PreviewRender:
- Using new render API, previewrender (in buttons) now uses regular render
code to generate images.
- new datafile 'preview.blend.c' has the preview scenes in it
- previews get rendered in exact displayed size (1 pixel = 1 pixel)
3D Preview render
- new; press Pkey in 3d window, for a panel that continuously renders
(pkey is for games, i know... but we dont do that in orange now!)
- this render works nearly identical to buttons-preview render, so it stops
rendering on any event (mouse, keyboard, etc)
- on moving/scaling the panel, the render code doesn't recreate all geometry
- same for shifting/panning view
- all other operations (now) regenerate the full render database still.
- this is WIP... but big fun, especially for simple scenes!
Compositor
- Using same node system as now in use for shaders, you can composit images
- works pretty straightforward... needs much more options/tools and integration
with rendering still
- is not threaded yet, nor is so smart to only recalculate changes... will be
done soon!
- the "Render Result" node will get all layers/passes as output sockets
- The "Output" node renders to a builtin image, which you can view in the Image
window. (yes, output nodes to render-result, and to files, is on the list!)
The Bad News
- "Unified Render" is removed. It might come back in some stage, but this
system should be built from scratch. I can't really understand this code...
I expect it is not much needed, especially with advanced layer/passes
control
- Panorama render, Field render, Motion blur, is not coded yet... (I had to
recode every single feature in render, so...!)
- Lens Flare is also not back... needs total revision, might become composit
effect though (using zbuffer for visibility)
- Part render is gone! (well, thats obvious, its default now).
- The render window is only restored with limited functionality... I am going
to check first the option to render to a Image window, so Blender can become
a true single-window application. :)
For example, the 'Spare render buffer' (jkey) doesnt work.
- Render with border, now default creates a smaller image
- No zbuffers are written yet... on the todo!
- Scons files and MSVC will need work to get compiling again
OK... thats what I can quickly recall. Now go compiling!
- Previews inside groups now get updated too
- Activating nodes inside of groups updates UI and preview render correctly
- Entering/leaving groups updates UI and previewrender
- Material Node: now draws socket name next to colorpicker for inputs
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
- Adding execution code for Node trees. Was a bit a puzzle, since I want
it to be multithreading by design. This now is solved by defining a
stack per tree for all data that's being written into. This stack, which
resides now in the NodeTree itself, then can be allocated per thread.
- For testing pleasure, I've added a 'mix node' and a 'show node', so
you can already see it do something. :)
- reshuffled structure, to put things nice together, and have easier node
adding. Current state is still WIP though, structure might change.
For the record; new file node_shaders.c will contain all shader node
definitions, apart from the drawing callbacks.
Next: I'm going to check on Andrea's work on icons now, since this is very
much needed for true shader/composit work.
Now back to release work...
- Sunday merger with bf-blender
- Foundations for new Node editor in Blender, generic framework that can
be used for Material/Texture, Compositing, Logic or maybe even Sequencer.
Note: this doesn't do anything yet, nor save! Is just to get this nice
in CVS now. :)
