I've limited it to just the RGB<->XYZ stuff for now, correct image handling is the next step.
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D3478
With copy-on-write we can no longer assumes the point density data is
available after Cycles synchronization with Blender data is done. So
force it to be loaded earlier, even if it's not great for interactivity.
This introduces a new depsgraph API for getting updated datablocks,
rather than getting it from bpy.data.
* depsgraph.ids_updated gives a list of all datablocks in the depsgraph
which have been updated.
* depsgraph.id_type_updated('TYPE') is true if any datablock of the given
type has been added, removed or modified.
More API updates are coming to properly handle multiple depsgraphs and
finer update granularity, but this should make Cycles work again.
The depsgraph was always created within a fixed evaluation context. Passing
both risks the depsgraph and evaluation context not matching, and it
complicates the Python API where we'd have to expose both which is not so
easy to understand.
This also removes the global evaluation context in main, which assumed there
to be a single active scene and view layer.
Differential Revision: https://developer.blender.org/D3152
Now the only missing bit seems to be in Cycles to pass depsgraph to
builtin_image_float_pixels().
Ideally we could get evaluation context instead of using depsgraph + settings.
But for the other rna EvaluationContext functions this is how we are doing.
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D3087
User notes
----------
Compositing, rendering of multi-layers in Eevee should be fully working now.
Development notes
-----------------
Up until now we were still using the same depsgraph for rendering and viewport
evaluation. And we had to go out of our ways to be sure the depsgraphs were
updated.
Now we iterate over the (to be rendered) view layers and create a depsgraph to
each one, fully evaluated and call the render engines (Cycles, Eevee, ...) with
this viewlayer/depsgraph/evaluation context.
At this time we are not handling data persistency, Depsgraph is created from
scratch prior to rendering each frame. So I got rid of most of the partial
update calls we had during the render pipeline.
Cycles: Brecht Van Lommel did a patch to tackle some of the required Cycles
changes but this commit mark these changes as TODOs. Basically Cycles needs to
render one layer at a time.
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D3073
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
This patch moves all the functionality previously in SceneRenderLayer to SceneLayer.
If we want to rename some of these structs now would be a good time to do it, before they are in SceneLayer.
Everything should be working, though I will test things further tomorrow. Once this is committed depsgraph can get
rid of the workaround added in rna_Main_meshes_new_from_object and finish whatever this patch was preventing from being finished.
This patch also adds a few placeholders for the overrides (samples, ...). These are obviously not working, so some unittests that rely on 'lay', and 'zmask' will fail.
This patch does not addressed the change of moving samples to ViewRender (I have this as a separate patch and needs some separate discussion).
Following next is the individual note of the individual parts that were committed.
Note 1: It is up to Cycles to still get rid of exclude_layer internally.
Note 2: Cycles still need to handle its own doversion for the use_layer_samples cases and
(1) Remove the override as it is
(2) Add a new override (scene.cycles.samples) if scene.cycles.use_layer_samples != IGNORE
Respecting the expected behaviour when scene.cycles.use_layer_samples == BOUNDED.
Note 3: Cycles still need to implement the per-object holdout
(similar to how we do shadow catcher).
Note 4: There are parts of the old (Blender Internal) rendering pipeline that is still
using lay, e.g., in shi->lay.
Honestly it will be easier to purge the entire Blender Internal code away instead of taking things from it bit by bit.
Reviewers: sergey, campbellbarton, brecht
Differential Revision: https://developer.blender.org/D2919
The idea is to make it possible to report extra meta data from
render engine to the file writing. This way we can provide
additional information such as number of samples rendered by
resumable Cycles rendering so we can easily combine files back.
Currently only report number of samples from Cycles when rendering
a single render-layer scene. This is something what was required
here at the studio. We can easily extend that further.
Ideally we would also need to support non-string metadata, but
that's for later.
Reviewers: mont29, campbellbarton
Reviewed By: mont29, campbellbarton
Subscribers: sybren, candreacchio
Differential Revision: https://developer.blender.org/D2502
Progressive refine undoes memory saving from save buffers, so enabling
both does not make much sense. Previously enabling progressive refine
would disable denoising, but it should be the other way around since
denoise actually affects the render result.
Includes some code refactor for progressive refine render buffers, and
avoids recomputing tiles for each progressive sample.
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
This commit contains the first part of the new Cycles denoising option,
which filters the resulting image using information gathered during rendering
to get rid of noise while preserving visual features as well as possible.
To use the option, enable it in the render layer options. The default settings
fit a wide range of scenes, but the user can tweak individual settings to
control the tradeoff between a noise-free image, image details, and calculation
time.
Note that the denoiser may still change in the future and that some features
are not implemented yet. The most important missing feature is animation
denoising, which uses information from multiple frames at once to produce a
flicker-free and smoother result. These features will be added in the future.
Finally, thanks to all the people who supported this project:
- Google (through the GSoC) and Theory Studios for sponsoring the development
- The authors of the papers I used for implementing the denoiser (more details
on them will be included in the technical docs)
- The other Cycles devs for feedback on the code, especially Sergey for
mentoring the GSoC project and Brecht for the code review!
- And of course the users who helped with testing, reported bugs and things
that could and/or should work better!
Previously, every RenderPass would have a bitfield that specified its type. That limits the number of passes to 32, which was reached a while ago.
However, most of the code already supported arbitrary RenderPasses since they were also used to store Multilayer EXR images.
Therefore, this commit completely removes the passflag from RenderPass and changes all code to use the unique pass name for identification.
Since Blender Internal relies on hardcoded passes and to preserve compatibility, 32 pass names are reserved for the old hardcoded passes.
To support these arbitrary passes, the Render Result compositor node now adds dynamic sockets. For compatibility, the old hardcoded sockets are always stored and just hidden when the corresponding pass isn't available.
To use these changes, the Render Engine API now includes a function that allows render engines to add arbitrary passes to the render result. To be able to add options for these passes, addons can now add their own properties to SceneRenderLayers.
To keep the compositor input node updated, render engine plugins have to implement a callback that registers all the passes that will be generated.
From a user perspective, nothing should change with this commit.
Differential Revision: https://developer.blender.org/D2443
Differential Revision: https://developer.blender.org/D2444
The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
Previously, the code would only update the status string if the main status changed.
However, the main status did not include the remaining time, and therefore it wasn't updated until the amount of rendered tiles (which is part of the main status) changed.
This commit therefore makes the BlenderSession remember the time of the last status update and forces a status update if the last one was more than a second ago.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D2465
