This commit extends dependency graph API with an argument which
denotes that all custom data layers are to be preserved. This
forces modifier stack re-evaluation with more inclusive mask.
Far from ideal, since this might fail in certain configurations
with indirectly used objects which might be missing layers needed
for the current object evaluation. But this is how it worked for
a long time, so should be good enough for until more sophisticated
solution is found.
In order to use this new behavior two things are to be passed:
- Pass keep_all_data_layers=True
- Pass a valid dependency graph.
The dependency graph is only needed if keep_all_data_layers=True
and is NOT to be passed if keep_all_data_layers=False.
If keep_all_data_layers=True the dependency graph MUST be passed.
Reviewers: mont29, brecht
Reviewed By: mont29
Maniphest Tasks: T64994, T64794
Differential Revision: https://developer.blender.org/D4940
One of the usecases is to create mesh from an object is a manner similar to
how Apply Modifiers does it, and have it in the bmain so it can be referenced
by other objects.
This usecase is something what went unnoticed in the previous API changes, so
here is a followup.
Summary of changes:
* bpy.meshes.new_from_object() behaves almost the same as before this change.
The difference now is that it now ensures all referenced data-blocks are
original (for example, materials referenced by the mesh).
* object.to_mesh() now creates free-standing Mesh data-block which is outside
of any bmain. The object owns it, which guarantees the memory never leaks.
It is possible to force free memory by calling object.to_mesh_clear().
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4875
Main goal here is to make it obvious and predictable about
what is going on.
Summary of changes.
- Access to dependency graph is now only possible to a fully evaluated
graph. This is now done via context.evaluated_depsgraph_get().
The call will ensure both relations and datablocks are updated.
This way we don't allow access to some known bad state of the graph,
and also making explicit that getting update dependency graph is not
cheap.
- Access to evaluated ID is now possible via id.evaluated_get().
It was already possible to get evaluated ID via dependency graph,
but that was a bit confusing why access to original is done via ID
and to evaluated via depsgraph.
If datablock is not covered by dependency graph it will be returned
as-is.
- Similarly, request for original from an ID which is not evaluated
will return ID as-is.
- Removed scene.update().
This is very expensive to update all the view layers.
- Added depsgraph.update().
Now when temporary changes to objects are to be done, this is to
happen on original object and then dependency graph is to be
updated.
- Changed object.to_mesh() to behave the following way:
* When is used for original object modifiers are ignored.
For meshes this acts similar to mesh-copy, not very useful but
allows to keep code paths similar (i.e. for exporter which has
Apply Modifiers option it's only matter choosing between original
and evaluated object, the to_mesh() part can stay the same).
For curves this gives a mesh which is constructed from displist
without taking own modifiers and modifiers of bevel/taper objects
into account.
For metaballs this gives empty mesh.
Polygonization of metaball is not possible from a single object.
* When is used for evaluated object modifiers are always applied.
In fact, no evaluation is happening, the mesh is either copied
as-is, or constructed from current state of curve cache.
Arguments to apply modifiers and calculate original coordinates (ORCO,
aka undeformed coordinates) are removed. The ORCO is to be calculated
as part of dependency graph evaluation.
File used to regression-test (a packed Python script into .blend):
{F7033464}
Patch to make addons tests to pass:
{F7033466}
NOTE: I've included changes to FBX exporter, and those are addressing
report T63689.
NOTE: All the enabled-by-default addons are to be ported still, but
first want to have agreement on this part of changes.
NOTE: Also need to work on documentation for Python API, but, again,
better be done after having agreement on this work.
Reviewers: brecht, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D4834
This is only available through the API, mainly intended for render farms to
combine rendered multilayer EXR Files with different samples. The images are
currently expected to have the exact same render layers and passes, just with
different samples.
Variance passes are still simply a weighted average, ideally these should be
merged more intelligently.
Differential Revision: https://developer.blender.org/D4554
Loop triangles are tessellated triangles create from polygons, for renderers
or exporters that need to match Blender's polygon tesselation exactly. These
are a read-only runtime cache.
Tessfaces are a legacy data structure from before Blender supported n-gons,
and were already mostly removed from the C code.
Details on porting code to loop triangles is in the release notes.
Differential Revision: https://developer.blender.org/D3539
There is one legit place in the code where memcpy was used as an
optimization trick. Was needed for older version of GCC, but now
it should be re-evaluated and checked if it still helps to have
that trick.
In other places it's somewhat lazy programming to zero out all
object members. That is absolutely unsafe, at the moment when
less trivial class is used as a member in that object things
will break.
Other cases were using memcpy into an object which comes from
an external library. We don't control that object, and we can
not guarantee it will always be safe for such memory tricks
and debugging bugs caused by such low level access is far fun.
Ideally we need to use more proper C++, but needs to be done with
big care, including benchmarks of each change, For now do
annoying but simple cast to void*.
This patch adds support for IES files, a file format that is commonly used to store the directional intensity distribution of light sources.
The new IES node is supposed to be plugged into the Strength input of the Emission node of the lamp.
Since people generating IES files do not really seem to care about the standard, the parser is flexible enough to accept all test files I have tried.
Some common weirdnesses are distributing values over multiple lines that should go into one line, using commas instead of spaces as delimiters and adding various useless stuff at the end of the file.
The user interface of the node is similar to the script node, the user can either select an internal Text or load a file.
Internally, IES files are handled similar to Image textures: They are stored in slots by the LightManager and each unique IES is assigned to one slot.
The local coordinate system of the lamp is used, so that the direction of the light can be changed. For UI reasons, it's usually best to add an area light,
rotate it and then change its type, since especially the point light does not immediately show its local coordinate system in the viewport.
Reviewers: #cycles, dingto, sergey, brecht
Reviewed By: #cycles, dingto, brecht
Subscribers: OgDEV, crazyrobinhood, secundar, cardboard, pisuke, intrah, swerner, micah_denn, harvester, gottfried, disnel, campbellbarton, duarteframos, Lapineige, brecht, juicyfruit, dingto, marek, rickyblender, bliblubli, lockal, sergey
Differential Revision: https://developer.blender.org/D1543
For correct results these must have been set already when the depsgraph was
created and evaluated, so all dependencies have appropriate resolutions too.
For particle we no longer backup and restore the viewport particles to avoid
overwriting them during render, as copy-on-write solves this for us. Even
without COW particles seem to work ok.
This also removes the particle simplification options based on camera. This
was never used much and only available in Blender Internal.
Differential Revision: https://developer.blender.org/D3148
This save a little memory and copying in the kernel by storing only a 4x3
matrix instead of a 4x4 matrix. We already did this in a few places, and
those don't need to be special exceptions anymore now.
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
GCC seems to detect uninitialized into function calls now, but then isn't
always smart enough to see that it is actually initialized. Disabling this
warning entirely seems a bit too much, so initialize a bit more now.
The issue is coming from the fact that float3 is actually 16 bytes aligned
data type and the "padding" was not initialized. This caused memcmp() to
access non-initialized memory.
The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
New logic of split_faces was leaving mesh in a proper state
from Blender's point of view, but Cycles wanted loop normals
to be "flushed" to vertex normals.
Now we do such a flush from Cycles side again, so we don't
leave bad meshes behind.
Thanks Bastien for assistance here!
The issue seems to be caused by vertex normal being re-calculated
to something else than loop normal, which also caused wrong loop
normals after re-calculation.
For now issue is solved by preserving CD_NORMAL for loops after
split_faces() is finished, so render engine can access original
proper value.
The issue was that we used to compare number of vertices for mesh after the auto
smooth was applied (at the center of the shutter time) with number of vertices
prior to the auto smooth applied. This caused false-positive consideration of a
mesh as changing topology.
Now we do autosplit as early as possible and do it from blender side, so Cycles
does not need to re-implement splitting on it's side.
Subdivision options can now be found in the subsurf modifier. The modifier must
be the last in the stack or the options will be unavailable. Catmull-Clark
subdivision is still unavailable and will fallback to linear subdivision instead
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2109
This adds support for ngons and attributes on subdivision meshes. Ngons are
needed for proper attribute interpolation as well as correct Catmull-Clark
subdivision. Several changes are made to achieve this:
- new primitive `SubdFace` added to `Mesh`
- 3 more textures are used to store info on patches from subd meshes
- Blender export uses loop interface instead of tessface for subd meshes
- `Attribute` class is updated with a simplified way to pass primitive counts
around and to support ngons.
- extra points for ngons are generated for O(1) attribute interpolation
- curves are temporally disabled on subd meshes to avoid various bugs with
implementation
- old unneeded code is removed from `subd/`
- various fixes and improvements
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2108
