This code obviously should also use the cache_fields flag variable,
like the code for reading the lowres data in the same function.
This is because fluid_fields actually represents the old state before
smoke was reallocated to match cache_fields read from the file, and if
it has some fields enabled that aren't allocated any more, it crashes.
This also fixes a reverse glitch: when a file was loaded with
the current frame in the middle of a baked smoke+fire simulation,
smoke appeared immediately, but the fire didn't until the frame
was changed. The reason is the same: after file load no fields
are initially allocated and thus fluid_fields is 0.
Point cache read code contains checks designed to prevent it reading
stale data when the relevant simulation code should instead compute
the next frame from the previous one. However in some situations like
motion blur subframes the simulation can't possibly do it and just
exits. This causes completely incorrect motion blur at or after the
last cached frame.
To fix, add a parameter that tells the cache code whether it should
apply the checks and exit, or read what it can even if stale (true
means exactly same as old behavior).
Doing this in cache rather than clamping the frame number better in
the caller lets it handle the case of incomplete cache that stops
before the official last frame.
Reviewed By: mont29, lukastoenne
Maniphest Tasks: T49004
Differential Revision: https://developer.blender.org/D2144
Commit rB709ca0ece changed how rotation was handled for particles so
that unless actual rotation physics is enabled, there is no rotation.
However it only updated ptcache_particle_read, forgetting to change
exactly the same code in ptcache_particle_interpolate.
This means that for subframes old code that computes a rotation from
velocity is used, resulting in completely different rotation than for
integer frames. This causes rotational motion blur by itself, and also
mangles motion blur paths of child particles.
Reviewers: sergey, lukastoenne
Maniphest Tasks: T45936
Differential Revision: https://developer.blender.org/D2124
The bake system had a 200ms sleep for each frame substep, to give the UI time
to redraw. I don't think there is a good reason to have this, with fair thread
scheduling this will give UI thread 2x more time at best, and the UI doesn't
need to be that responsive during bake.
simulations.
This commits implements OpenVDB as an extra cache format in the Point
Cache system for smoke simulations. Compilation with the library is
turned off by default for now, and shall be enabled when the library is
present.
A documentation of its doings is available here: http://
wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport.
A guide to compile OpenVDB can be found here (Linux): http://
wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/
Dependencies_From_Source#OpenVDB
Reviewers: sergey, lukastoenne, brecht, campbellbarton
Reviewed By: brecht, campbellbarton
Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli,
jtheninja, lukasstockner97, dingto, brecht
Differential Revision: https://developer.blender.org/D1721
This is how the old code used to initialize it. Current value was
failing big time when baking all caches (always set to MAXFRAME), and it
was added right before commit to quiet a warning... (I know, I know...)
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
Note that the collision modifier doesn't have any use for Loop indices,
so to avoid duplicating the loop array too,
MVertTri has been added which simply stores vertex indices (runtime only).
deletion of baked caches.
This happens when objects use file names with matching prefixes:
"CubeX" -> not baked
"CubeXYZ" -> baked
The first objects cache should be discarded up to the current frame on
file load, but the second should be left intact. But because the cache
file names for both use the same prefix as well (based on hex name
representation) they both match the "CubeX" name and get discarded.
Adding the underscore terminator solves this issue, because it is never
part of the hex file name string.
WARNING: this solution does not work with custom names for point caches.
This feature is pretty much broken, users have to ensure their names
are unique themselves. Due to the possibility of underscores in names
and the ambiguity of point cache suffixes there is no reliable way to
encode filenames in that case.
Update lzo library due to security issue
Update lzo to latest version. This fixes a security issue (reported in T41974)
This also fixes some (false-positive) valgrind warnings.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D803
Current temporary data of Blender suffers one major issue - default 'temp' dir on Windows is never
automatically cleaned up, and can end being quite big when used by Blender, especially when we have
to store per-process data (using getpid() in file names).
To address this, this patch:
* Divides tempdir paths in two, one for 'base' temp dir (the same as previous unique tempdir path),
the other is a mkdtemp-generated sub-dir, specific to each Blender instance.
* Only uses base tempdir when we need some shallow persistance accross Blender sessions - and we always
reuse the same filename (quit.blend...) or generate small file (crash reports...).
* Uses temp sub-dir for heavy files like pointcache or renderEXRs (Save Buffer option).
* Erases temp sub-dir on quit or crash.
To get this working it also adds a working 'recursive delete' to BLI_delete() under Windows.
Note that, as in current code, the 'recover render result' hack-feature that was possible
with SaveBuffer option is still removed. A real renderresult cache feature will be added
soon, though.
Reviewers: campbellbarton, brecht, sergey
Reviewed By: campbellbarton, sergey
CC: sergey
Differential Revision: https://developer.blender.org/D531
Note it was already the case for many simulations (cloth, rigidbody, etc.), just doing this
systematically in BKE_ptcache_add() now, will avoid us some recurring bug reports.
Advanced users will know when they can/have to raise this parameter!
There is not much sense to have a whole BLI file just to check SSE2 on CPUs...
So idea is to rename it to more generic "BLI_system", and add to it more system-related
utils, like e.g. an include helper for getpid(), which allows to hide unix/windows
internals from rest of the code...
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D439
It was intended to work actually using particle cache's stack index
but this index might have been calculated incorrect in special case:
* With default cube scene, add particle system to the cube
* Add disk cache to the particle system
* Save file and reload it
* Add another particle system and enable disk cache
This would lead to two point caches with the same stack index of zero.
This happened because point cache indices list wasn't stored in the
.blend file so once you've reload your file blender doesn't know anything
about number or point caches used.
And what was even more confusing is that point cache indices list was
trying to be load from the file, but this failed because it wasn't in the
file.
This commit solves the root of the issue which is ability of producing
.blend file with two point caches using the same disk cache. This is
done by making it sure that point cache indices list is stored in the
.blend file. And also made it so disabling disk cache will tag it to
recalculate stack index.
Old broken files wouldn't magically start working, but fixing them is
rather simple manually by toggling Disk Cache option.
Reviewers: lukastoenne, brecht
CC: sergof
Differential Revision: https://developer.blender.org/D286
Summary:
Made objects update happening from multiple threads. It is a task-based
scheduling system which uses current dependency graph for spawning new
tasks. This means threading happens on object level, but the system is
flexible enough for higher granularity.
Technical details:
- Uses task scheduler which was recently committed to trunk
(that one which Brecht ported from Cycles).
- Added two utility functions to dependency graph:
* DAG_threaded_update_begin, which is called to initialize threaded
objects update. It will also schedule root DAG node to the queue,
hence starting evaluation process.
Initialization will calculate how much parents are to be evaluation
before current DAG node can be scheduled. This value is used by task
threads for faster detecting which nodes might be scheduled.
* DAG_threaded_update_handle_node_updated which is called from task
thread function when node was fully handled.
This function decreases num_pending_parents of node children and
schedules children with zero valency.
As it might have become clear, task thread receives DAG nodes and
decides which callback to call for it.
Currently only BKE_object_handle_update is called for object nodes.
In the future it'll call node->callback() from Ali's new DAG.
- This required adding some workarounds to the render pipeline.
Mainly to stop using get_object_dm() from modifiers' apply callback.
Such a call was only a workaround for dependency graph glitch when
rendering scene with, say, boolean modifiers before displaying
this scene.
Such change moves workaround from one place to another, so overall
hackentropy remains the same.
- Added paradigm of EvaluaitonContext. Currently it's more like just a
more reliable replacement for G.is_rendering which fails in some
circumstances.
Future idea of this context is to also store all the local data needed
for objects evaluation such as local time, Copy-on-Write data and so.
There're two types of EvaluationContext:
* Context used for viewport updated and owned by Main. In the future
this context might be easily moved to Window or Screen to allo
per-window/per-screen local time.
* Context used by render engines to evaluate objects for render purposes.
Render engine is an owner of this context.
This context is passed to all object update routines.
Reviewers: brecht, campbellbarton
Reviewed By: brecht
CC: lukastoenne
Differential Revision: https://developer.blender.org/D94
The BKE_ptcache_mem_index_find is using unsigned ints for binary search
"high" values - but this leads to integer overflow if the totpoint
number is 0 and causes invalid array access.
This was in fact really nasty bug, caused by multitex_nodes
function using global variable R (which is a copy of current
renderer). this variable is not initialized to anything
meaningful for until first rendering (preview or final)
happened.
Since multitex_nodes might be used outside of render pipeline,
made it so whether CM is on or off as an argument to functions
multitex_ext_safe and multitex_ext. Now multitex_nodes() is
only shall be used for stuff happening from render pipeline!
Also needed to make some changes to other places, so all the
usages of texture sampling knows for the fact whether CM is
on or off.
And one more change is related on behavior of dispalcement,
wave, warp, weightvg modifiers and smoke. They'll be always
using CM off since texture is used for influence, not for
color.
It's rather bigger patch, but it's mostly straightforward
changes, which we really need to be done.
Reviewed by Brecht, thanks!
