Renaming compositor node in search panel "View Switch" to "Switch View"
for better consistency.
Reviewed By: dfelinto
Differential Revision: https://developer.blender.org/D11717
Using the "Camera Fit Frame to Selected" operator didn't work for Grease Pencil
objects. The same issue caused grease pencil preview thumbnails to be useless
(e.g. when using "Mark Asset" on a Grease Pencil object).
Reason was that there was no logic to handle grease pencil data and its strokes
for the object display-point iterators used for the "Frame Selected" logic.
Addresses T89656.
Reviewed by: Antonio Vazquez, Campbell Barton
Differential Revision: https://developer.blender.org/D11833
The original assumption that the `modifyMesh` function is only
called when the modifier is applied was wrong. There are still a
couple of other places calling it through `BKE_modifier_modify_mesh`.
Now there is an extra check that makes sure instances are only
realized when the modifier is actually applied.
The backdrop image gizmo was not following the backdrop image, it
needs to be refreshed whenever the view changes. The region init
callback is executed whenever the region size changes, so that should be
a reliable place to do that.
Reported as part of T87591.
In a collapsed hierarchy, some type of data are listed as one icon per
item (2.79 did this for all data),
others are 'compacted' as a single icon with a counter (also indicating
if the active item is down that collapsed hierarchy) from 2.80 on.
Not quite sure if {rB92dfc8f2673e} was meant to do this (if it was, this
was not working though because relevant code would only get executed for
object hierarchies it seems), so now this is done for bones as well.
Fixes T88413.
Maniphest Tasks: T88413
Differential Revision: https://developer.blender.org/D11404
Walk rotate speed for tablets was being modified at runtime by scaling
the user preference mouse_speed by a constant factor; this consolidates
scaling into the the compile time tablet scale factor in walkApply.
No change in behavior.
When renaming an ID somewhere in the UI after marking it as asset, it would
often get lost in the Asset Browser (scrolled out of view). It would also get
deactivated.
This patch makes sure that if an asset is active whose ID gets renamed, it is
kept active and visible. That is important for a fast, uninterrupted asset
creation workflow, where users often rename assets while working in the asset
browser.
Old code stored the new file-name to identify a file after re-reading the
file-list after the rename. For assets that doesn't work because there may be
multiple assets with the same name. Here the simple solution of just storing
the pointer to the renamed ID is chosen, rather than relying on the file-name
in this case. (Should be fine with undo, since the ID * reference is short
lived, it's not stored over possible undo steps. If it turns out to have
issues, I rather switch to a rename_id_uuid, but keep that separate from the
file->uid).
Reviewed by: Sybren Stüvel
Differential Revision: https://developer.blender.org/D11119
TBB includes in windows.h which will by
default define min/max macro's by default,
which collide with stl's min/mac functions.
this change instructs windows.h not to
add the offending macros
(Note: This is an alternative version for D9994 by @Schiette. The commit
message is based on his description.)
Currently, when a new directory is created it is not selected.
Similarly, when renaming an existing file or directory, it does not
remain active/highlighted blue after renaming.
This change makes sure the file or directory is always selected after
renaming, even if the renaming failed or was cancelled.
This has some usability advantages:
- Open the newly created directory without having to select it (ENTER).
- If you make a naming mistake, you can immediately fix that (F2)
without having to click it again.
- If you create a directory and forget to name it, you can fix that
(F2) without having to select it.
- This is consistent with many common File Browsers.
Further, selecting the item even after renaming failed or was cancelled
helps keeping the file in focus, so the user doesn't have to look for it
(especially if the renaming just failed which the user may not notice).
In other words, it avoids disorienting the user.
Also see D11119 which requires this behavior.
We could also always select the file/directory on mouse press. This
would make some hacks unnecessary, but may have further implications. I
think eventually that's what we should do though.
`filesel.c` seems like the place that should contain file selection
functions. Previously it was in `file_ops.c` because that was the only
file that actually used it. But a followup commit needs it from a
different file.
Many ui features for geometry nodes need access to information generated
during evaluation:
* Node warnings.
* Attribute search.
* Viewer node.
* Socket inspection (not in master yet).
The way we logged the required information before had some disadvantages:
* Viewer node used a completely separate system from node warnings and
attribute search.
* Most of the context of logged information is lost when e.g. the same node
group is used multiple times.
* A global lock was needed every time something is logged.
This new implementation solves these problems:
* All four mentioned ui features use the same underlying logging system.
* All context information for logged values is kept intact.
* Every thread has its own local logger. The logged informatiton is combined
in the end.
Differential Revision: https://developer.blender.org/D11785
The geometry nodes modifier uses id properties for the inputs to node groups.
That is because the set of properties changes depending on which geometry
node group is selected.
The animation was not updated correctly because the `ANIMATION_EVAL`
depsgraph node was not evaluated, because nothing depended on it in the
depsgraph. This patch makes sure that the proper link to the geometry
component is inserted.
Differential Revision: https://developer.blender.org/D11831
This issue happened because of some miscommunication during the original
patch review. Since we have the parent element in other outliner modes
(Blender File, Data API) I was on the fence here. Rolling this back now
so that when Show All View Layers is off we don't see the current View
Layer top element.
The fix is simple, but it was better to format the code around to
follow the style in this file.
Differential Revision: https://developer.blender.org/D11830
Rename the mesh circle to "Mesh Circle", mesh line to "Mesh Line",
and mesh subdivide to "Mesh Subdivide". Previously they looked exactly
the same in the search menu, and the nodes themselves had the same
label. This is a "deep" rename that also renames internal defines and
function names to match the UI.
This node is quite similar to the curve to points node, but creates
points for only the start and end of each spline. This is a separate
node because the sampling from the curve to points node don't apply,
and just for ease of use.
All attributes from the curves are copied, including the data for
instancing: tangents, normals, and the derived rotations. One simple
use case is to make round caps on curves by instancinghalves of a
sphere on each end of the splines.
Differential Revision: https://developer.blender.org/D11719
DNA parsing assumed any identifier which starts with
(`struct`, `unsigned`, `const`) was that identifier.
So a struct called `constTest foo;` would be parsed as `est foo;`.
Add utility function to check identifiers are not
part of a larger identifier.
This also supports skipping these identifiers in any order.
Reviewed By: LazyDodo
Ref D11837
The curve resample node neglected to copy attributes to single point
result splines. That could have caused errors if some of the splines
in the result had only one point but others had more.
Use "Snap Playhead to Strips" option to enable playhead snapping.
Change behavior of CTRL key to invert snapping similar to transform operator.
Currently this option is disabled by default. It makes editing quite unpleasant
for me personally, but ideally I should gather feedback from more users.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D11745
This field was used to reference "parent" meta strips in `sequences_all`
RNA collection iterator functions.
Use `SeqIterator` wrapped in `BLI_Iterator` to iterate over elements.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11793
Work scheduler needed initialization and execution models are
not created during constant folding. This moves work execution
method to execution system.
This patch horizontally centers the text inside the progress bar
widget. It is currently left-aligned and offset to the middle, which
doesn't center properly.
see D11205 for details and examples.
Differential Revision: https://developer.blender.org/D11205
Reviewed by Julian Eisel
The menu lists all socket types that are valid for the node tree.
Changing a socket type updates all instances of the group and keeps
existing links to the socket.
If changing the socket type leads to incorrect node connections the
links are flagged as invalid (red) and ignored but not removed. This is
so users don't lose information and can then fix resulting issues.
For example: Changing a Color socket to a Shader socket can cause an
invalid Shader-to-Color connection.
Implementation details:
The new `NODE_OT_tree_socket_change_type` operator uses the generic
`rna_node_socket_type_itemf` function to list all eligible socket types.
It uses the tree type's `valid_socket_type` callback to test for valid
types. In addition it also checks the subtype, because multiple RNA
types are registered for the same base type. The `valid_socket_type`
callback has been modified slightly to accept full socket types instead
of just the base type enum, so that custom (python) socket types can be
used by this operator.
The `nodeModifySocketType` function is now called when group nodes
encounter a socket type mismatch, instead of replacing the socket
entirely. This ensures that links are kept to/from group nodes as well
as group input/output nodes. The `nodeModifySocketType` function now
also takes a full `bNodeSocketType` instead of just the base and subtype
enum (a shortcut `nodeModifySocketTypeStatic` exists for when only
static types are used).
Differential Revision: https://developer.blender.org/D10912
Partially revert 7fc220517f, as it
introduced two issues:
- Deleting keys without active keying set was no longer possible, and
- there was no more confirmation popup.
Pressing {key Alt I} in the 3D Viewport now executes
`ANIM_OT_keyframe_delete_v3d`, adjusted to suit both T88068 and T89592:
- If there is an active keying set, delete keys according to that keying
set.
- Otherwise, behave as `ANIM_OT_keyframe_delete_v3d` did before, that
is, delete all keyframes of the selected object and in pose-mode also
of selected bones.
Remove duplicate code from the `ANIM_OT_keyframe_delete` operator. The
actions of the removed code are already performed by the preceding
`keyingset_get_from_op_with_error()` call.
No functional changes.
Graphs are usually large, needing a lot of horizontal scrolling and
they can include more information for debugging.
This patch makes graph more compact horizontally by splitting
labels in lines and removing namespaces.
Furthermore it adds following information:
- Operation ID.
- SetValueOperation float value.
- Optionally, operation node name.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11720
Currently there is no clear way to know if an operation is constant
(i.e. when all rendered pixels have same values). Operations may
need to get constant input values before rendering to determine
their resolution or areas of interest. This is the case of scale, rotate
and translate operations. Only "set operations" are known as
constant but many more are constant when all their inputs are so.
Such cases can be optimized by only rendering one pixel.
Current solution for tiled implementation is to get first pixel
from input. This works for root execution groups, others
need previous groups to be rendered.
On full frame implementation this is not possible, because buffers
are created on rendering to reduce peak memory and there is
no per pixel calls.
This patch evaluates all operations that are constant into primitive
operations (Value/Vector/Color) before determining resolutions.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11490
Note that this name is essentially never used anywhere, besides as 'information'
mostly accessible from python console. Those embedded IDs are not in Main, so they
are not accessible by name ever, and mostly unusable from animation perspective
(either drivers or fcurves).
Therefore, no breakage is expected in user scripts or addons, nor when
loading in older versions of Blender.
Reviewed By: dfelinto, brecht
Differential Revision: https://developer.blender.org/D11812
During initialization of the platform a debug message is generated and
interpreted by de callback. Here the platform is checked what requires
an initialized platform.
Fixed by giving the platform check less priority in the check.
This option will determine visibility on either render or the viewport
visibility. Same for modifer settings. So it will either evaluate the
depsgrah with DAG_EVAL_RENDER or DAG_EVAL_VIEWPORT.
This not only makes it more flexible, it is also a lot
clearer which visibility / modfier setting is taken into account (up
until now, this was always considered to be DAG_EVAL_RENDER)
This option was always present in the USD exporter, this just brings
Alembic in line with that.
ref. T89594
Maniphest Tasks: T89594
Differential Revision: https://developer.blender.org/D11820
