When boolean's Object also has a modifier that depends back on
the target Object, a crash occurred.
In a case like this, BKE_modifier_get_evaluated_mesh_from_evaluated_object
returns NULL, so just have to protect against that case.
I had done some experiments to see what Fast boolean did for material
mapping and thought it just used the same slot in the target as the
slot in the source. The truth is more complicated: if the target material
exists in any slot of the destination, we need to remap to whatever
slot has the matching material. I fixed Exact Boolean to do this.
Since the materials may be in the object, this means that BKE_mesh_boolean
had to get another argument, the remapping arrays.
I will note that the current behavior of Fast, and now Exact, is not ideal.
Ideally, if the source material does not exist in the target, a new material
slot should be created in the target and the source material copied there
(and incrementing the material's reference count). Maybe a future project,
but for now, I want the behavior of Exact to match that of Fast.
A few changes to make this consistent with other modifier panels:
- Title case for UI labels
- Use property split (and therefore decorators)
- Declare sublayout variables after getting modifier info
The commit rB6f63417b500d that made exact boolean work on meshes
with holes (like Suzanne) unfortunately dramatically slowed things
down on other non-manifold meshes that don't have holes and didn't
need the per-triangle insideness test.
This adds a hole_tolerant parameter, false by default, that the user
can enable to get good results on non-manifold meshes with holes.
Using false for this parameter speeds up the time from 90 seconds
to 10 seconds on an example with 1.2M triangles.
The Exact modifier code had been written to avoid using BMesh but
in the initial release the modifier still converted all Meshes to
BMeshes, and then after running the boolean code on the BMeshes,
converted the result back to a Mesh.
This change skips that. Most of the work here is in getting the
Custom Data layers right. The approach taken is to merge default
layers from all operand meshes into the final result, and then
use the original verts, edges, polys, and loops to copy or interpolate
the appropriate custom data layers from all operands into the result.
Since the initial merge of the geometry nodes project, the modifyPointCloud
function already was already modifying a geometry set. The function wasn't
renamed back then, because then the merge would have touched many
more files.
Ref T83357.
This is an addendum to previous boolean fix, where the object
transformation was "cleaned". Now the operand one is too.
This fixes the issue shown in the video in T82301 when you move
a column around the XY plane with the top and bottom faces
supposedly coplanar with a cube. The transformation matrix when
you do that has a tiny offset in the z component.
Two problems were fixed. One, the code for dissolving vertices
left a face around if dissolving a vertex would leave less than
three vertices. Instead, the face should be deleted.
Two, with transformations like "rotate 180 degrees", this should
be no problem with exact, but the current transformation matrix
has very small non-zero entries where it shouldn't. Cleaning the
transformation matrix makes it more likely that user expectations
about coplanar faces will be fulfilled.
The code was trying to ignore hidden geometry when doing boolean,
which is correct when used as a tool, but not when a modifier.
Added a "keep_hidden" argument to bmesh_boolean to distinguish the
two cases.
Also fixed a bug when the tool is used with hidden geometry that
is attached to unhidden geometry that is deleted by the operation.
The code was trying to ignore hidden geometry when doing boolean,
which is correct when used as a tool, but not when a modifier.
Added a "keep_hidden" argument to bmesh_boolean to distinguish the
two cases.
Also fixed a bug when the tool is used with hidden geometry that
is attached to unhidden geometry that is deleted by the operation.
For the fast solver, there was an optimization carried over
from the non-collection case for empty meshes which did not
work in the chained boolean code for collection operands.
Removed that optimization in the collection case.
For the fast solver, there was an optimization carried over
from the non-collection case for empty meshes which did not
work in the chained boolean code for collection operands.
Removed that optimization in the collection case.
Note that possibility to pass the new ID pointer as parameter was kept,
as this is needed for some rather specific cases (like in depsgraph/COW,
when copying into already allocated memory).
Part of T71219.
This removes `foreachObjectLink` from `ModifierTypeInfo`, `GpencilModifierTypeInfo`
and `ShaderFxTypeInfo`. There is no need to have both, `foreachObjectLink` and `foreachIDLink`.
There is not code that actually depends on `foreachObjectLink`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9078
As noted in T80164, there are quite a few area of Blender where the
"Reset to Default Value" operator in button context menus doesn't work.
Modifiers are one of them, because the DNA defaults system was never
set up for them.
Additionally, this should make modifier versioning easier. Whenever a
new field is added it should be automatically initialized to the
default value.
I had to make some ordering changes in the following modifiers to work
around an error with `-Wsign-conversion` in the macros:
- Solidify Modifier
- Corrective Smooth Modifier
- Screw Modifier
Some modifiers are special cases and are skipped in this commit:
- Data Transfer Modifier
- Cloth Modifier
- Fluid Modifier
- Softbody Modifier
Differential Revision: https://developer.blender.org/D8747
This reduces the number of places that have to be modified
when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D9000
With this change `outliner_draw.c` does not have to be
edited anymore when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8998
Also added code so that exact solver does the whole collection at once.
This patch allows users to use a collection (as an alternative to Object)
for the boolean modifier operand, and therefore get rid of a long modifier stack.
With this option, self-intersections in either or both operands
will be handled properly (if both sides are piecewise winding
number constant, and maybe some other cases too).
In the Boolean tool, this flag was there already but the code
forced a unary operation in that case; this commit corrects it
to make a binary operation. This flag makes the code slower, which
is why it is an option and not an always-on thing.
This change doesn't impact release builds,
in general avoid having defaults depend on build options
since it means files from different builds won't match.
For modifier shortcuts we added a "custom_data" field to panels.
This commit uses the same system for accessing the list data that
corresponds to each panel. This way the context is only used once
and the modifier for each panel can be accessed more easily later.
This ends up being mostly a cleanup commit with a few small changes
in interface_panel.c. The large changes in the UI functions are due
to the fact that the panel custom data is now passed around as a
single pointer instead of being created again for every panel.
The list_index variable in Panel.runtime is removed as it's now
unnecessary.
Differential Revision: https://developer.blender.org/D8559
After discussion with @howardt, it seems the solver property should
always be exposed, even in lite builds. This commit removes the
ifdefs for that property and adds a warning if the "Exact" solver is
used when Blender is compiled without GMP.
These changes apply to the boolean modifier as well.
Properties that display conditionally depending on other properties
should generally be lower down so the movement of buttons as
settings are tweaked is less intrusive.
This is for design task T67744, Boolean Redesign.
It adds a choice of solver to the Boolean modifier and the
Intersect (Boolean) and Intersect (Knife) tools.
The 'Fast' choice is the current Bmesh boolean.
The new 'Exact' choice is a more advanced algorithm that supports
overlapping geometry and uses more robust calculations, but is
slower than the Fast choice.
The default with this commit is set to 'Exact'. We can decide before
the 2.91 release whether or not this is the right choice, but this
choice now will get us more testing and feedback on the new code.
These changes are smaller, made based on feedback and a pass on all
the layouts for clarity and consistency. The Multires modifier UI will
be addressed in a separate patch. Here is an overview of the changes:
Renaming Options:
- Build: "Start" -> "Start Frame"
- Curve: "From Radius" -> "Size from Radius"
- Screw: "Calc Order" -> "Calculate Order"
- Displace, Warp, Wave: "Texture Coordinates Object" -> "Object"
Move Mode Toggle to Top & Expand:
- Bevel, Boolean, Normal Edit, Subdivision
Use Columns for Tighter Spacing:
- Displace, Explode, Ocean, Particle Instance, Remesh, Shrinkwrap,
Solidify, Warp, Weighted Normal, Wave
Misc:
- Bevel: Set inactive properties for vertex bevel
- Mesh Sequence Cache: Remove box for cache file
- Skin: Don't align "Mark Loose" and "Clear Loose"
- Array: Expand relative offset subpanel by default
- Array: Move start cap, end cap to a new subpanel
- Bevel: Move width type above width
Differential Revision: https://developer.blender.org/D8115
This is part of a greater blenloader decentralization effort (T76372).
For modifiers the goal is that fewer files have to be modified when
a new modifier is added.
This patch just adds the `blendWrite` and `blendRead` callbacks to
`ModifierTypeInfo` but does not change any other code yet. In the next
steps, modifier specific code will be moved from `writefile.c` and
`readfile.c` into their corresponding `MOD_*` files.
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
There is no user visible difference in standard builds, as there are no
volume modifiers yet. When using WITH_NEW_OBJECT_TYPES some deform only
modifiers are now available for hair and pointcloud objects.
Differential Revision: https://developer.blender.org/D7141
Give pointcaches a proper path function which e.g. also resolves
ALT+click (assign to all selected) not working for anything relating to
pointcaches.
This also cleans up the usage of the 'eModifierTypeFlag_UsesPointCache'
flag (removed from the boolean modifier, added to the softbody modifier).
Maniphest Tasks: T64573
Differential Revision: https://developer.blender.org/D7115
- Use 'BKE_object_material_*', 'BKE_id_material_*' prefix
for functions that operate on Object and ID types.
- Use '_len' suffix for length (matching BLI naming).
- Use '_p' suffix for functions that return a pointer to values
where the value would typically be returned.
Functions renamed:
- BKE_object_material_resize was BKE_material_resize_object
- BKE_object_material_remap was BKE_material_remap_object
- BKE_object_material_remap_calc was BKE_material_remap_object_calc
- BKE_object_material_array_p was BKE_object_material_array
- BKE_object_material_len_p was BKE_object_material_num
- BKE_id_material_array_p was BKE_id_material_array
- BKE_id_material_len_p was BKE_id_material_num
- BKE_id_material_resize was BKE_material_resize_id
- BKE_id_material_append was BKE_material_append_id
- BKE_id_material_pop was BKE_material_pop_id
- BKE_id_material_clear was BKE_material_clear_id
Modifier stack evaluation would copy mesh settings other than mesh topology
automatically, outside of the individual modifier evaluation. This leads to hard
to understand code, and makes it unclear which settings are available in following
modifiers, and which only after the entire stack is evaluated.
Now every modifier is responsible to ensure the mesh it outputs preserves materials,
texture space and other settings, or alters them as needed.
Fixes T64739: incorrect texture space for various modifiers
Differential Revision: https://developer.blender.org/D5808
Modifier stack evaluation would copy mesh settings other than mesh topology
automatically, outside of the individual modifier evaluation. This leads to hard
to understand code, and makes it unclear which settings are available in following
modifiers, and which only after the entire stack is evaluated.
Now every modifier is responsible to ensure the mesh it outputs preserves materials,
texture space and other settings, or alters them as needed.
Fixes T64739: incorrect texture space for various modifiers
Differential Revision: https://developer.blender.org/D5808
This is a continuation of rB39f005eae8eed8b939579aff8c9a05a4f50e5e38
Now all the fields where we check for object type in RNA (like
rna_Curve_object_poll) will have a safe guard for when this isn't the
case. For example when loading files that has missing object libraries
and all missing objects are replaced with empties (placeholders).
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5425
