This change applies only for automatic proxy building, when strip
is added to timeline. Manual building process is not affected.
Don't build proxy file if movie is already fast enough to seek.
To determine seek performance, check if whole GOP can be decoded
in 100 milliseconds.
To consider some variation in GOP size, large number of packets are
read, assuming that each packet will produce 1 frame. While this is not
technically correct, it does give quite accurate estimate of maximum GOP
size.
This test will ensure consistent performance on wide array of machines.
Check should be done in order of few milliseconds.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11671
When weight painting the bone overlay is extremely intrusive,
effectively requiring either extensive use of hiding individual
bones, or disabling the whole bone overlay between selections.
This addresses the issue by adding a bone opacity slider that
is used for the 'wireframe' armature drawing mode. It directly
controls the uniform opacity as a straightforward option.
Differential Revision: https://developer.blender.org/D11804
Since we have the overlays popover, it makes sense to allow toggling the
context path like in the 3D viewport. This commit adds a property,
and turns it on by default in existing files.
Differential Revision: https://developer.blender.org/D13248
The Domain Size node has a single geometry input and a selection for
the component type. Based on the component chosen, outputs containing
single values for the related domains are shown.
Mesh:
- Point Count
- Edge Count
- Face Count
- Face Corner Count
Curve:
- Point Count
- Spline Count
Point Cloud:
- Point Count
Instances:
- Instance Count
Differential Revision: https://developer.blender.org/D13365
Adds a new overlay called "Timings" to the Geometry Node editor.
This shows the node execution time in milliseconds above the node.
For group nodes and frames, the total time for all nodes inside
(recursively) is shown. Group output node shows the node tree total.
The code is prepared for easily adding new rows of information
to the box above the node in the future.
Differential Revision: https://developer.blender.org/D13256
Adds an attribute provider for instance attributes.
A new domain `ATTR_DOMAIN_INSTANCE` is implemented.
Instance attributes are not yet realized correctly.
Differential Revision: D13149
Adds a filter popup to the header that allows specifiying which data-block
types to show. The menu automatically reflects all supported ID types, so it
shows a checkbox for materials, worlds and actions currently by default, and
all ID types with the "Extended Asset Browser" experimental feature enabled.
This patch includes code from D9891 and D12754, so credit goes to Juanfran and Dalai.
I updated the patches to work with `master` and with the new overlay toggle.
The reason to include both changes as part of one patch is that the dimmed dashed lines work much better together with colored wires.
Theme setting for dash opacity:
{F11370574, size=full}
{F11286177, size=full, autoplay, loop}
{F11149912, size=full}
For adding the overlay I used `SpaceImageOverlay` as reference, although I'm not familiar with this code so there might be mistakes.
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12886
Since 2D cursor will be used rarely in VSE and it is adding visual
noise, it will be hidden by default.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12933
- Rename RNA SpaceSeq.show_strip_overlay to show_overlays
matching the 3D View, the term "strip" was misleading as this is used
for the preview as well.
- Rename various RNA overlay settings to overlay_frame
since "Frame Offset" is a specific feature, avoid having both
Editor.show_overlay and SpaceSeq.show_overlays.
- Rename Editing `over_*` -> `overlay_frame_*` in DNA,
as well as flags.
- Use 2D cursor in the preview space using shortcuts
matching the UV editor and 3D view.
- Add Cursor tool, cursor transform.
- Support for cursor and bound-box pivot.
- Add pivot pie menu.
Add read-only access to the active catalog ID via
`context.space_data.params.catalog_id` in the Asset Browser context.
The UUID is exposed as string to Python.
The Asset Browser now displays a tree with asset catalogs in the left
sidebar.
This replaces the asset categories. It uses the new UI tree-view API
(https://wiki.blender.org/wiki/Source/Interface/Views#Tree-View).
Buttons are displayed for adding and removing of catalogs. Parent items
can be collapsed, but the collapsed/uncollapsed state is not stored in
files yet.
Note that edits to catalogs (e.g. new or removed catalogs) are only
written to the asset library's catalog definition files when saving a
.blend.
In the "Current File" asset library, we try to show asset catalogs from
a parent asset library, or if that fails, from the directory the file is
stored in. See adaf4f56e1.
There are plenty of TODOs and smaller glitches to be fixed still. Plus a
UI polishing pass should be done.
Important missing UI features:
* Dragging assets into catalogs (WIP, close to being ready).
* Renaming catalogs
* Proper handling of catalogs in the "Current File" asset library
(currently not working well).
The "Current File" asset library is especially limited still. Since this
is the only place where you can assign assets to a catalog, this makes
the catalogs very cumbersome in general. To assign an asset to a
catalog, one has to manually copy the Catalog ID (a random hash like
number) to the asset metadata through a temporary UI in the Asset
Browser Sidebar. These limitations should be addressed over the next few
days, they are high priority.
Differential Revision: https://developer.blender.org/D12670
With 794c2828af & f48a4aa0f9 it's possible to reuse possibly
expensive, nested data of a data-block when appending. E.g. the
texture of a material, or the mesh of an object. Without this it's easy
to bloat memory and the file size. Duplicated textures also cause
unnecessary shader recompilations.
The feature was intended to be the new default behavior for the Asset
Browser, but it wasn't actually added to the UI yet. This patch adds a
new import type option to the Asset Browser. So from the menu in the
header, you can now choose between:
* Link
* Append
* Append (Reuse Data)
The latter is the new default.
Maniphest Task: https://developer.blender.org/T91741
Differential Revision: https://developer.blender.org/D12647
Reviewed by: Sybren Stüvel, Bastien Montagne
This patch adds color tags to VSE strips, an overlay option to toggle the colors
on and off, a section in the theme settings to define the 9 possible colors and
two ways of changing the color tag through the UI. You can change the color
through the right-click context menu, or in the strip side panel next to the
strip name.
Color tags are defined in user preferences and they can be disabled in overlay
settings.
Reviewed By: campbellbarton, ISS
Differential Revision: https://developer.blender.org/D12405
Implements T89789, T89792, custom grid (described as dynamic grid in
T78389) and UV grid snapping (T78391)
Replaces the default UV editor grid with 2 new types of grid :
* Custom grid: Allows the user to create an NxN grid, where the value
of N is specified by the user.
* Subdividing grid: Subdivides the UV editor grid when the user
zooms in the viewport and vice versa when zooming out.
UV snapping improvements :
* Increment snapping: Increment values for snapping are calculated based
on which grid type is being used in the UV editor
(subdividing or custom). In general the increment value is equal to
the distance between 2 visible grid lines.
* Absolute grid snap: New toggle added to increment snapping option in
the UV editor, allows UV grid snapping during translation.
Reviewed By: campbellbarton
Ref D12684
This was reported for the Outliner.
It was possible to set 'show_locked_time' on any space (via python, not
sure if there are other ways to achieve this).
Navigating in an animation editor obviously ruined the layout in certain
Editors that are not made for this.
Now restrict syncing to editors that support it well (the ones that have
this setting exposed in their menus) and prevent setting this in RNA.
Maniphest Tasks: T91237
Differential Revision: https://developer.blender.org/D12512
There are cases where there is no way to ensure we do have/know about an
active scene. Further more, this should not be required to perform
'real' updates on data, only to perform additional special handling in
current scene (mostly related to editing tools, UI, etc.).
This pointer is actually almost never used in practice, and half of its current
usages are fairly close to abuse of the system (like calls to
`ED_gpencil_tag_scene_gpencil` or `BKE_rigidbody_cache_reset`).
This commit ensures that the few places using this 'active scene' pointer are
safely handling the `NULL` case, and clearly document the fact that a
NULL scene pointer is valid.
Buttons to edit asset metadata are now disabled for assets from an
external library (i.e. assets not stored in the current .blend file).
Their tooltips explain why they are disabled.
Had to do some RNA trickery to disable the metadata properties at RNA
level, not at UI script level.
The basic idea is:
* Local data-block assets set the data-block as owning ID for the asset
metadata RNA pointer now.
* That way we can use the owner ID to see where the metadata belongs to
and decide if it's editable that way.
* Additionaly, some Python operators needed better polling so they show
as grayed out, and don't just fail.
One important thing: Custom properties of the metadata can still be
edited. The edits won't be saved however. Would be nice to disable that,
but it's currently not supported on BPY/IDProperty/RNA level.
Addresses T82943.
Differential Revision: https://developer.blender.org/D12127
Draw thumbnails as strip overlay. This works for movie and image strips.
To draw thumbnails, this overlay has to be enabled and strips must be
tall enough.
The thumbnails are loaded from source file using separate thread and
stored in cache.
Drawing code uses only images stored in cache, and if any is missing,
background rendering job is started. If job can not render thumbnail,
to prevent endless loop of creating job for missing image it sets
`SEQ_FLAG_SKIP_THUMBNAILS` bit of `Sequence` flag.
To prevent visual glitches during timeline panning and zooming, `View2D`
flag `V2D_IS_NAVIGATING` is implemented. If bit is set, drawing code
will look for set of evenly distributed thumbnails that should be
guaranteed to exist and also set of previously displayed thumbnails.
Due to volatile nature of cache these thumbnails can be missing anyway,
in which case no new thumbnails will be drawn for particular strip.
Cache capacity is limited to 5000 thumbnails and performs cleanup of
non visible images when limit is reached.
ref T89143
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12266
Add tools for image manipulation in sequencer preview region.
This includes:
- Translate, rotate and resize operators, tools and gizmos
- Origin for image transformation
- Median point and individual origins pivot modes
- Select and Box select operator works in preview
- Image overlay drawing
ref T90156
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12105
Improvements to Quad View options' titles and descriptions.
See D12381 for more details.
Differential Revision: https://developer.blender.org/D12381
Reviewed by Hans Goudey and Campbell Barton
Allow the UDIM grid to be shown and adjusted when there are images
loaded in UV edit mode. Right now the grid feature disappears once an
image is loaded and many have found this to be confusing.
Based on community and artist feedback, there was support to change this
behavior[1]
This patch does the following:
- Allows the grid to be shown even when images are present
- The max allowable dimensions for the grid has been increased from
10x10 to 10x100 to match the underlying maximum UDIM range that blender
supports
Note: This should not affect other Image editor modes like Paint/Mask or
the Render Result viewer etc. Future work in this area is currently
documented in a dedicated design task[2]
[1] https://devtalk.blender.org/t/the-udim-tile-grid-design-and-feedback-thread/20136
[2] https://developer.blender.org/T90913
Differential Revision: https://developer.blender.org/D11860
There were requests to be able to track the file selection in the File
Browser. Just using the file name for that wouldn't if the file browser
has the recursive display enabled. File names could be duplicated then.
So expose the entire path relative to the currently displayed directory.
To be consistent with the image editors and 3D viewport
the cursor location can be changed from the sidebar.
This was missing from the clip editor, but support has been added in this commit.
Previously, the only way to precisely set the cursor was
to call the set cursor operator then use the redo panel to adjust the value.
In the `FileList` struct, rename the `AssetLibraryReference
*asset_library` field to `asset_library_ref` -- it's a description of
which asset library is used, and not the asset library itself.
This is to make space for a future `AssetLibrary *asset_library` field,
which will point to an actual asset library struct/class.
No functional changes.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D12151
So far the Asset Browser just showed the same menus as the File Browser.
Not all of their entries made sense for the Asset Browser though. I
decided to just give them entirely different classes to avoid confusing
if-else checks everywhere. I think the code duplication this adds is a
minor issue, it's better to keep things seperated clearly IMO.
* View menu: Add "Asset Details" toggle for the sidebar region.
* View menu: Remove recursion sub-menu
* View menu: Remove "File Path" region toggle, which doesn't apply for
the Asset Browser.
Differential Revision: https://developer.blender.org/D12057
Add overlay option to disable grid drawing.
Reuse drawing code from other editors (timeline editor)
Add argument `display_minor_lines` to function
`UI_view2d_draw_lines_x__discrete_frames_or_seconds`
This way minor line drawing can be disabled and so it doesn't cause
too much visual noise. Also spacing seems to be too fine, so VSE uses 3x
what is defined in preferences.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D11790
This was an open TODO, I wanted to have code for translating asset
library references from and to enum values in a central place, and
access that in the same way from both the Asset Browser and the
Workspace RNA code.
* Adds own file for the related functions.
* Adds doxygen comments.
* Updates RNA callbacks to properly use these functions.
* Let these functions call each other, avoid duplicating logic.
The asset view UI template is a mini-version of the Asset Browser that
can be placed in regular layouts, regions or popups. At this point it's
made specifically for placement in vertical layouts, it can be made more
flexible in the future.
Generally the way this is implemented will likely change a lot still as
the asset system evolves.
The Pose Library add-on will use the asset view to display pose
libraries in the 3D View sidebar.
References:
* https://developer.blender.org/T86139
* https://code.blender.org/2021/06/asset-browser-project-update/#what-are-we-building
* https://code.blender.org/2021/05/pose-library-v2-0/#use-from-3d-viewport
Notes:
* Important limitation: Due to the early & WIP implementation of the
asset list, all asset views showing the same library will show the
same assets. That is despite the ID type filter option the template
provides. The first asset view created will determine what's visible.
Of course this should be made to work eventually.
* The template supports passing an activate and a drag operator name.
The former is called when an asset is clicked on (e.g. to apply the
asset) the latter when dragging (e.g. to .blend a pose asset). If no
drag operator is set, regular asset drag & drop will be executed.
* The template returns the properties for both operators (see example
below).
* The argument list for using the template is quite long, but we can't
avoid that currently. The UI list design requires that we pass a
number of RNA or custom properties to work with, that for the Pose
Libraries should be registered at the Pose Library add-on level, not
in core Blender.
* Idea is that Python scripts or add-ons that want to use the asset view
can register custom properties, to hold data like the list of assets,
and the active asset index. Maybe that will change in future and we
can manage these internally.
As an example, the pose library add-on uses it like this:
```
activate_op_props, drag_op_props = layout.template_asset_view(
"pose_assets",
workspace,
"active_asset_library",
wm,
"pose_assets",
workspace,
"active_pose_asset_index",
filter_id_types={"filter_action"},
activate_operator="poselib.apply_pose_asset",
drag_operator="poselib.blend_pose_asset",
)
drag_op_props.release_confirm = True
drag_op_props.flipped = wm.poselib_flipped
activate_op_props.flipped = wm.poselib_flipped
```
Adds the following to `bpy.types.FileSelectEntry`:
* `id_type`: The data-block type the file represenets, if any.
* `local_id`: The local data-block it represents, if any (assets only).
And the following to `bpy.types.AssetHandle`:
* `local_id`: The local data-block the asset represents, if any.
This kind of information and the references are important for asset related
operators and UIs. They will be used by upcoming Pose Library features.
Implements a basic, WIP version of the asset list. This is needed to
give the asset view UI template asset reading and displaying
functionality.
See:
* Asset System: Data Storage, Reading & UI Access - https://developer.blender.org/T88184
Especially the asset list internals should change. It uses the
File/Asset Browser's `FileList` API, which isn't really meant for access
from outside the File Browser. But as explained in T88184, it does a lot
of the stuff we currently need, so we (Sybren Stüvel and I) decided to
go this route for now. Work on a file-list rewrite which integrates well
with the asset system started in the `asset-system-filelist` branch.
Further includes:
* Operator to reload the asset list.
* New `bpy.types.AssetHandle.get_full_library_path()` function, which
gets the full path of the asset via the asset-list.
* Changes to preview loading to prevent the preview loading job to run
eternally for asset views. File Browsers have this issue too, but
should be fixed separately.
This per-workspace active asset library will be used by the asset views
later. Note that Asset Browsers have their own active asset library,
overriding the one from the workspace.
As part of this the `FileSelectAssetLibraryUID` type gets replaced by
`AssetLibraryReference` which is on the asset level now, not the
File/Asset Browser level. But some more work is needed to complete that,
which is better done in a separate commit.
This also moves the asset library from/to enum-value logic from RNA to
the editor asset level, which will later be used by the asset view.
This adds id_properties_clear() and id_properties_ensure() functions
to RNA structs. This is meant as an initial change based on discussion
in review of D9697. However, they may be useful in other situations.
The change requires refactoring the internal idproperties callback to
return a pointer to the IDProperty pointer, which actually turns out
to be quite a nice cleanup.
An id_properties attribute could be added in the future potentially.
Differential Revision: https://developer.blender.org/D11908
