Ogl default is 4 but for almost all cases, blender use tightly
packed format. This avoid confusion and state change for the
common case.
The only case that __might__ need alignement is DDS loader
(untested) so leaving this as it is.
This is legacy code from before Eevee and Workbench rendering in background
mode was supported. Avoid memory leak by only queueing GPU textures to be
freed when we know they have been allocated.
Differential Revision: https://developer.blender.org/D8172
This makes it easier to track as well as allowing us to sample the same
texture with different sampling parameters (which should fix the related
T73942 in the long run).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7831
Also put glDisable(GL_DITHER) in it since we don't even use it (but is
enabled by default).
Also leave GL_MULTISAMPLE on by default since it has no impact on non-MSAA
framebuffers.
Caused by rB5593efec01c2.
Use first texture if we dont have an ImageUser (instead of multiview
one). Same fix as in rB9ace7e243978 / T74925.
Maniphest Tasks: T76755
Differential Revision: https://developer.blender.org/D7743
Part of the fix was to get gputexture to use an array to accomodate each
eye. This takes care of viewports showing individual Left or Right
views.
For the combined view the fix was in overlay_image.c:camera_background_images_stereo_setup.
Note 1: Referece images are still not supporting stereo.
Note 2: For painting, and getting image bindcode I'm hardcording a
single-view experience.
Note 3: Without D6922 stereo is too broken to even test this patch.
With D6922 + this patch the fullscreen modes work (anaglyph/interlace
not yet).
Differential Revision: D7143
- Move gpuPush/Pop from GPU_draw.h into GPU_state.h
as this is for pushing/popping state.
- Add 'GPU_STANDALONE' define, to bypass use of user-preferences
for theme colors and pixelsize, as well as pbvh init/free functions.
Needed to get GHOST tests working again.
This adds the `Half Float Precision` option in the image property panel.
This option is only available on float textures and is enabled by default.
Adding a flag inside the imbuf (IB_halffloat) on load is done for EXR and PSD formats that can store half floating point (16bits/channels).
The option is then not displayed in this case and forced.
Related task T73086
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6891
The function `gpu_texture_create_tile_array` checked for a valid
tile ibuf when determining the packing location. During the actual packaging it didn't.
As the tiles are already ignored when selecting the packing location, we
can also ignore it when copying it to the glTexture. Therefore this
patch removes the existing BLI_assert and replaces it with a NULL check.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D6738
In blender 2.79 you could use a render result as a camera background
image. This is useful during layout/compositing. During Blender 2.80
development there were 2 issues introduced that removed this feature.
* to receive a render result the image required a lock. This lock wasn't passed and therefore no image was read from the result. Generating an GPUTexture from an Blender image also didn't do the locking.
* the iuser->scene field wasn't set what is required for render results.
This change adds an optional `ibuf` parameter to `GPU_texture_from_blender` that can be passed when available.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D6684
Based on @fclem's suggestion in D6421, this commit implements support for
storing all tiles of a UDIM texture in a single 2D array texture on the GPU.
Previously, Eevee was binding one OpenGL texture per tile, quickly running
into hardware limits with nontrivial UDIM texture sets.
Workbench meanwhile had no UDIM support at all, as reusing the per-tile
approach would require splitting the mesh by tile as well as texture.
With this commit, both Workbench as well as Eevee now support huge numbers
of tiles, with the eventual limits being GPU memory and ultimately
GL_MAX_ARRAY_TEXTURE_LAYERS, which tends to be in the 1000s on modern GPUs.
Initially my plan was to have one array texture per unique size, but managing
the different textures and keeping everything consistent ended up being way
too complex.
Therefore, we now use a simpler version that allocates a texture that
is large enough to fit the largest tile and then packs all tiles into as many
layers as necessary.
As a result, each UDIM texture only binds two textures (one for the actual
images, one for metadata) regardless of how many tiles are used.
Note that this rolls back per-tile GPUTextures, meaning that we again have
per-Image GPUTextures like we did before the original UDIM commit,
but now with four instead of two types.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6456
gpu_draw.c had generic sounding utility functions which were specific
to smoke drawing.
Split into it's own file so the functionality is clearly separated.
A collection of smaller changes that are required in the /blender/source files. A lot of them are also due to variable renaming.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3855
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
Adds a check when starting blender if your platform is supported. We use a blacklist
as drivers are updated more regular then blender (stable releases).
The mechanism detects if the support level changed or has been validated by the user previously.
Changes can happen due to users updating their drivers, but also when we change the support
level in our code base.
When the user has seen the limited support level message it is saved in the user config.
It would be better to have a system specific config section, but currently not clear
what could benefit from that.
When the platform is unsupported or has limited support a dialog box will appear including a link
to our user manual describing what to do.
**Windows**
Windows uses the MessageBox that is provided by the windows kernel.
**X11**
We use a very lowlevel messagebox for X11. It is very limited in use and can be fine tuned when needed.
**SDL/APPLE**
There is no implementation for SDL or APPLE at this moment as the platform support feature targets mostly Windows users.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5955
With Blender 2.80 we introduced a more flexible matcap system. One
change we did was to multiply the matcap with the base color that was
shaded. As matcaps contains diffuse and specular lighting in a single
texture this lead to rendering artifacts. Artists were complaining that
everything looked to metalic.
We now support a separate `diffuse` and `specular` pass for matcaps.
`shaded_color = diffuse_light * base_color + specular_light`
For matcaps to support this feature they need to be multilayer openexr
files with 2 renderpasses (named `diffuse` and `specular`). In the future
we can change this to first pass/second pass in stead of this naming
convention.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D5335
Images were being freed often because the tagging for when the image was last
used was missing.
Differential Revision: https://developer.blender.org/D5252
Migrate old legacy code to the draw mamager/object mode. The old legacy
version did not work with wireframe. By migrating the code
to modern draw manager code we have mode control on the drawing process.
Still background images do not work with OIT, the cause seems to be that the transparent pixels are treated as background pixels.
Also There are some artifacts when working with Holdouts and DoF, this
is because the draw engines do not pass the correct alpha values.
Reviewers: fclem, brecht
Differential Revision: https://developer.blender.org/D4638
Now texture storage of images is defined by the alpha mode of the image. The
downside of this is that there can be artifacts near alpha edges where pixels
with zero alpha bleed in. It also adds more code complexity since image textures
are no longer all stored the same way.
This changes allows us to keep using sRGB texture formats, which have edge
darkening when stored with premultiplied alpha. Game engines seems to generally
do the same thing, and we want to be compatible with them.
This type of indices is not natively supported on modern GPU and
gives warning on some implementation. The memory savings it
provides is also quite minimal and unlikely to be visible on
nowadays hardware.
This remove some uneeded struct members and makes primitive
restart always enabled by default. This can be broken by addons
if they are not careful enough but many other states have this
problem.
Also leverage GL_PRIMITIVE_RESTART_FIXED_INDEX if
ARB_ES3_compatibility is supported. This removes all API calls
to change restart index depending on indices length.
Cycles now uses the color space on the image datablock, and uses OpenColorIO
to convert to scene linear as needed. Byte images do not take extra memory,
they are compressed in scene linear + sRGB transfer function which in common
cases is a no-op.
Eevee and workbench were changed to work similar. Float images are stored as
scene linear. Byte images are compressed as scene linear + sRGB and stored in
a GL_SRGB8_ALPHA8 texture. From the GLSL shader side this means they are read
as scene linear, simplifying the code and taking advantage of hardware support.
Further, OpenGL image textures are now all stored with premultiplied alpha.
Eevee texture sampling looks a little different now because interpolation
happens premultiplied and in scene linear space.
Overlays and grease pencil work in sRGB space so those now have an extra
conversion to sRGB after reading from image textures. This is not particularly
elegant but as long as engines use different conventions, one or the other
needs to do conversion.
This change breaks compatibility for cases where multiple image texture nodes
were using the same image with different color space node settings. However it
gives more predictable behavior for baking and texture painting if save, load
and image editing operations have a single color space to handle.
Differential Revision: https://developer.blender.org/D4807
If image buffer is not loaded and blender attempts to reload it (during
`BKE_image_acquire_ibuf`) over and over for each frame rendered.
When attempting this reload, image_load_image_file is calling
`BKE_image_free_buffers` and tag the Image to the (GPU) image_free_queue
(because this run on the rendering thread).
If the main thread decide to redraw the UI and go through `GPU_free_unused_buffers` they all get deleted and if that happens before the rendering thread use them ... segfault.
If I replace the environment textures with correct ones (the file does not seems to contain them), there is no crash when rendering.
I used a list of GPUTexture from blender Image to increase and decrease the
reference counter correctly.
This add very little memory and computation overhead.
The shaders are: `GPU_SHADER_3D_FLAT_SELECT_ID` and `GPU_SHADER_3D_UNIFORM_SELECT_ID`.
This commit allows the drawing of the mesh select ids to be done on a 32UI format texture.
This simplifies the shader that previously acted on the backbuffer and had to do an uint to rgba conversion.
Differential Revision: https://developer.blender.org/D4350
Convention was not to but after discussion on 918941483f we agree its
best to change the convention.
Names now mostly follow RNA.
Some exceptions:
- Use 'nodetrees' instead of 'nodegroups'
since the struct is called NodeTree.
- Use 'gpencils' instead of 'grease_pencil'
since 'gpencil' is a common abbreviation in the C code.
Other exceptions:
- Leave 'wm' as it's a list of one.
- Leave 'ipo' as is for versioning.
The dependency graph now handles updating image users to point to the current
frame, and tags images to be refreshed on the GPU. The image editor user is
still updated outside of the dependency graph.
We still do not support multiple image users using a different current frame
in the same image, same as 2.7. This may require adding a GPU image texture
cache to keep memory usage under control. Things like rendering an animation
while the viewport stays fixed at the current frame works though.
