This patch moves the realtime compositor out of experimental. See
T99210.
The first milestone is finished with regards to implementing most
essential nodes for single pass compositing. It is also now documented
in the manual and no major issues are known.
Differential Revision: https://developer.blender.org/D16891
Reviewed By: Clement Foucault
This patch allows the realtime compositor to be limited to a specific
compositing region that is a subset of the full render region. In the
context of the viewport compositor, when the viewport is in camera view
and has a completely opaque passepartout, the compositing region will be
limited to the visible camera region.
On the user-level, this gives the user the ability to make the result of
the compositor invariant of the aspect ratio, shift, and zoom of the
viewport, making the result in the viewport identical to the final
render compositor assuming size relative operations.
It should be noted that compositing region is the *visible* camera
region, that is, the result of the intersection of the camera region and
the render region. So the user should be careful not to shift or zoom
the view such that the camera border extends outside of the viewport to
have the aforementioned benefits. While we could implement logic to fill
the areas outside of the render region with zeros in some cases, there
are many other ambiguous cases where such a solution wouldn't work,
including the problematic case where the user zooms in very close,
making the camera region much bigger than that of the render region.
Differential Revision: https://developer.blender.org/D16899
Reviewed By: Clement Foucault
Previously cloth self-collision and other code that wants self-overlap
data was using an ordinary BVH overlap utility function. This works,
but is suboptimal because it fails to take advantage of the fact that
it is comparing two identical trees.
The standard traversal for self-collision essentially devolves into
enumerating all elements of the tree, and then matching them to the
tree starting at the root. However, the tree itself naturally partitions
the space, so overlapping elements are likely to be mostly placed nearby
in the tree structure as well.
Instead, self-overlap can be computed by recursively computing ordinary
overlap between siblings within each subtree. This only considers each
pair of leaves once, and provides significantly better locality.
It also avoids outputting every overlap pair twice in different order.
Differential Revision: https://developer.blender.org/D16915
If we change the radius of a point or spot lamp, we also change the area lamp size.
As shown in T102853, this is bad for animating the lamp type.
The solution is to make the property point to another member of the DNA
struct `Light`.
Differential Revision: https://developer.blender.org/D16669
Use the same `".selection"` attribute for both curve and point domains,
instead of a different name for each. The attribute can now have
either boolean or float type. Some tools create boolean selections.
Other tools create float selections. Some tools "upgrade" the attribute
from boolean to float.
Edit mode tools that create selections from scratch can create boolean
selections, but edit mode should generally be able to handle both
selection types. Sculpt mode should be able to read boolean selections,
but can also and write float values between zero and one.
Theoretically we could just always use floats to store selections,
but the type-agnosticism doesn't cost too much complexity given the
existing APIs for dealing with it, and being able to use booleans is
clearer in edit mode, and may allow future optimizations like more
efficient ways to store boolean attributes.
The attribute API is usually used directly for accessing the selection
attribute. We rely on implicit type conversion and domain interpolation
to simplify the rest of the code.
Differential Revision: https://developer.blender.org/D16057
Remove the redundant option to disable selection in order to simplify
the tools and UI, both conceptually and internally.
It was possible to disable curves selection completely by clicking on
the active selection domain. However, that was redundant compared to
just selecting everything by pressing "A". The remaining potential use
could have been saving a selection for later, but that can be done with
more complete attribute editing tools in the future.
Global scope arrays can incur suboptimal per-shader-thread memory allocations, resulting in excessive usage of limited local memory resources. These changes ensure that any arrays are limited to the closest scope in which they are required and thus will get correctly optimized by the compiler.
A number of constants have also been replaced with Macro's as these can result in better runtime performance for complex shader code.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D16825
A number of paths resulted in compilation errors after porting EEVEE to use Create-Info. Namely the fallback path for cubemap support. A number of other strict compilation failures regarding format comparison also required fixing when this mode is enabled.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261, T103313
Differential Revision: https://developer.blender.org/D16819
The Metal backend already supports output for the 6 clipping planes via gl_ClipDistances equivalent, however, functionality to toggle clipping plane enablement was missing.
Authored by Apple: Michael Parkin-White
Ref T96261
Depends on D16777
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D16813
- Support for non-contiguous shader resource bindings for all cases required by create-info
- Implement missing geometry shader alternative path for edit curve handle.
- Add support for non-float dummy textures to address all cases where default bindings may be required.
Authored by Apple: Michael Parkin-White
Ref T96261
Depends on D16721
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16777
The Realtime Compositor crashes on undo after an operation like Dissolve
node.
The compositor evaluator stored a reference to the compositor node tree
assuming that it will always be valid. This is not guaranteed, however,
and changes to the node tree can invalidate that reference. So we get
the node tree from the context directly every time to fix the crash.
This was due to a missing endpoint case that wasn't handled in the port.
The last point still have to be discarded manually because of the
dot/stroke setting of the material.
The first test `ma1.x == -1` is not necessary anymore since the index
buffer do not contain this point (which was rendered using instance
rendering before.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D16812
Attributes are unifying around a name-based API, and we would like to
be able to move away from CustomData in the future. This patch moves
the identification of active and fallback (render) color attributes
to strings on the mesh from flags on CustomDataLayer. This also
removes some ugliness used to retrieve these attributes and maintain
the active status.
The design is described more here: T98366
The patch keeps forward compatibility working until 4.0 with
the same method as the mesh struct of array refactors (T95965).
The strings are allowed to not correspond to an attribute, to allow
setting the active/default attribute independently of actually filling
its data. When applying a modifier, if the strings don't match an
attribute, they will be removed.
The realize instances / join node and join operator take the names from
the first / active input mesh. While other heuristics may be helpful
(and could be a future improvement), just using the first is simple
and predictable.
Differential Revision: https://developer.blender.org/D15169
Editmode should display the original (non-evaluated) points unless there
is something like an "On Cage" option of a modifier [which none of the
curves modifiers have].
This was not the case since the introduction in rBe15320568a29.
So we now draw the editpoints from the original curves. This also means
that original and evaluated curves might not have the same number of
points, so we have to get independent of `proc_point_buf` since that
would possibly create vertexbuffers of different sizes (compared to the
original curves) which is not allowed for a single batch.
- remove the "pos" alias from the vertex buffer format of proc_point_buf
- instead, create a new "edit_points_pos" vertex buffer
- fill that with the original (un-evaluated) curves positions
- dont request `proc_point_buf` anymore
- rename the editpoints flags buffer to be more consistent
And since original and evaluated points might also be in completely
different positions, we also need to draw connecting lines between those
editpoints to not have them float in thin air. For drawing these in
editmode, a simple polyline was chosen (instead of drawing lines in a
resolution that is take from the old particle system -- which is not
depending on points even but has a hardcoded resolution that can only be
upped by the hair_subdiv scene render setting)
- create appropriate batch and indexbuffer for this
- positions vertex buffer can be reused
- reuse particle edit shader (instead of curve edi shader) to get
segment highlighting
{F14055436}
NOTE: this also removes the broken depth handling and instead makes it
work (also XRay is properly taken into account) by binding the correct
overlay framebuffer.
NOTE: to further clarify the distinction between curves drawing (that is
based on the old partice system drawing) and drawing in editmode, the
corresponding vertexbuffers have been moved out of CurvesEvalCache into
CurvesBatchCache directly.
NOTE: drawing the lines in editmode could be improved (taking the "real"
resolution of splines into account, but since this should happen on the
GPU in a compute shader, this is for later)
Potentionally fixes T101889.
Maniphest Tasks: T101889
Differential Revision: https://developer.blender.org/D16281
This adds a new mirror image extension type for shaders and
geometry nodes (next to the existing repeat, extend and clip
options).
See D16432 for a more detailed explanation of `wrap_mirror`.
This also adds a new sampler flag `GPU_SAMPLER_MIRROR_REPEAT`.
It acts as a modifier to `GPU_SAMPLER_REPEAT`, so any `REPEAT`
flag must be set for the `MIRROR` flag to have an effect.
Differential Revision: https://developer.blender.org/D16432
This is because OB_MODE_SCULPT_CURVES is not part of OB_MODE_ALL_PAINT
(yet). While there is some chance it ends up there, there are a lot of
more places that need checking and so patch only fixes the report very
isolated.
NOTE: T93501 is related (since the option to show these should also be
hidden in sculptmode)
Maniphest Tasks: T101765
Differential Revision: https://developer.blender.org/D16764
Fixed more cases where attributes weren't being reinitialized
on switching PBVH mode:
* When PBVH_GRIDS and PBVH_BMESH force attributes into simple
array mode they no longer override simple_array in the
SculptAttributeParams parameters, instead they set a field
in SculptAttribute itself. Thus if the attribute is
reinitialized in another mode it won't retain the simple_array
parameter.
* sculpt_attribute_ensure_ex now calls sculpt_attr_update if
the attribute already exists.
* Fixed a bug from a couple commits ago that set
SculptAttribute.data_for_bmesh wrong.
PBVH draw code now builds coarse triangle index buffers
for multires. Note that the coarse grids can be at any
multires depth but is currently hardcoded to 1.
Compile each static shader using shaderc to Spir-V binaries.
The main goal is to make sure that the GLSL created using ShaderCreateInfo and able to compile to Spir-V.
For the second stage a correct pipeline needs to be created and some shader would need more
adjustments (push constants size).
With this patch future changes to GLSL sources can already be checked against vulkan, without the
backend finished.
Mechanism has been tested using MacOS and MoltenVK. For other OS, we should finetune CMake
files to find the right location to shaderc.
```
************************************************************
*** Build Mon 12 Dec 2022 11:08:07 CET
************************************************************
Shader Test compilation result: 463 / 463 passed (skipped 118 for compatibility reasons)
OpenGL backend shader compilation succeeded.
Shader Test compilation result: 529 / 529 passed (skipped 52 for compatibility reasons)
Vulkan backend shader compilation succeeded.
```
Reviewed By: fclem
Maniphest Tasks: T102760
Differential Revision: https://developer.blender.org/D16610
Improve a few messages, but mostly fix typos in many areas of the UI.
See inline comments in the differential revisiion for the rationale
behind the various changes.
Differential Revision: https://developer.blender.org/D16716
Image engine uses 4 gpu textures that are as large as the area being
drawn. The amount of needed GPU memory can be reduced by dividing the
region in smaller parts. Reducing the GPU memory also reduces the stalls
when updating the textures, improving the performance as well.
This optimization works, but is disabled for now due to some rounding
errors that drawn lines on the screen where the screen is divided.
It used to be a number of fixed full screen images where the
responsibility was at image engine. Now moved the responsibility to the
drawing mode to make sure we can allocate non-full region-size textures
in a future refactoring.
`get_gpu_textures` was created when the image engine didn't support
texture streaming and used the gpu textures that were stored in the
image buffer itself.
Float images loaded in Blender are converted to scene linear and don't
require additional conversion. Image engine can reuse the rect_float of
those images. An assert statement is added tp make this more clear and
to test on missing code paths or future developments.
Texture usage flags can now be provided during texture creation specifying
the ways in which a texture can be used. This allows the GPU backends to
perform contextual optimizations which were not previously possible. This
includes enablement of hardware lossless compression which can result in
a 15%+ performance uplift for bandwidth-limited scenes on hardware such
as Apple-Silicon using Metal.
GPU_TEXTURE_USAGE_GENERAL can be used by default if usage is not known
ahead of time. Patch will also be relevant for the Vulkan backend.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15967
Implementing non-geometry-shader path for rendering stencil shadows,
used by the workbench engine.
Patch also contains a few small modifications to Create-info to ensure
usage of gl_FragDepth is explicitly specified.
This is required for testing of the patch.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16436
