As can be confirmed by checking generic code for this operation,
it is supposed to blend between the result of Breakdown based on
actual frame range, and the current pose. However for some reason
the quaternion specific code was blending between the current pose
and the current keyframed pose. This means that the operation does
nothing if invoked without modifying the pose first.
This rewrites the code to match the non-quaternion behavior.
Differential Revision: https://developer.blender.org/D13030
Adds a new operator to the pose slider tools that blends the
current pose with the neighbouring poses in the timeline.
The operator can be called in pose mode with Shift+Alt+E
or from the "pose" menu under "In betweens/Blend to Neighbour"
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9137#inline-105214
Ref: D9137
After applying the pose breakdowner,
the "factor" slider in the redo panel wasn't set to the correct value
This would cause the pose to jump around
once you start dragging the slider
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12187
Ref: D12187
Change data structure of keylists. Reducing the balancing overhead and therefore increases performance.
| **Function** | **Master** | **Patch** |
|`draw_summary_channel`| 0.202105s| 0.083874s |
When adding items to the keylist it will store it in a linked list. This linked list is
accompanied with the length (key_len) and a `last_accessed_column`. last_accessed_column is a cursor
that improve the performance when adding new items as they are mostly ordered by frame numbers.
last_accessed_column is reset when a new fcurve/mask/... is added to the keylist.
Before searching or array access. the listbase needs to be converted to an array.
`ED_keylist_prepare_for_direct_access`. After that the caller can use
`ED_keylist_find_*` or `ED_keylist_array*` functions.
The internal array can also be accessed via the `ED_keylist_listbase` function.
The items inside the array link to the previous/next item in the list.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12052
For T78995 we want to change the data structure of keylists to
improve performance. (Probably a Vector with bin-search capabilities).
This patch hides the internal structure of the keylists behind `AnimKeylist`
structure. This allows us to change the internals without 'breaking' where it is
being used.
The change adds functions to create, free, find and walk over the
keylist.
Reviewed By: sybren
Maniphest Tasks: T78995
Differential Revision: https://developer.blender.org/D11974
When using a pose slider it is possible to hide bones with the 'H' key.
Before this patch the screen didn't update, so you had to move the mouse 1 pixel to update.
This patch makes it so it updates right away
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12024
Ref: D12024
This patch addresses the issue raised in T88340.
When entering a pose sliding operator bones would automatically get hidden.
While technically not a bug it was decided that it is too confusing.
Hiding with 'H' is still possible though, just won't happen automatically
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D11883
Ref: D11883
Extract the slider gui implemented for the pose slide tools.
Generalise it so it can be used by other tools as well.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9314
Ref: D9314
This patch changes occurrences of percentage to factor.
There are some usages of percentage left in there on purpose.
They are distinguished as follows:
- factor is 0-1 float
- percentage is 0-100 int
Ref D11361
Reviewed by: sybren, campbellbarton
Remove an unnecessary call to pose_slide_mouse_update_percentage
That call was overriding the typed value
Reviewed By: #animation_rigging, Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D11395
Ref D11395
Improve the "In Betweens" tools:
- Push Pose from Rest Pose
- Relax Pose to Rest Pose
- Push Pose from Breakdown
- Relax Pose to Breakdown
- Pose Breakdowner
These all now use the same new sliding tool:
- Actual visual indication of the blending/pushing percentage applied.
- Mouse wrapping to allow for extrapolation without having to worry
about the initial placement of the mouse. This also means these tools
are actually usable when chosen from the menu.
- Precision mode by holding {key Shift}.
- Snapping to 10% increments by holding {key Ctrl}.
- Overshoot protection; by default the tool doesn't allow overshoot
(lower than 0% or higher than 100%), and it can be enabled by pressing
{key E}.
- Bones are hidden while sliding, so the pose itself can be seen more
clearly. This can be toggled by pressing {key H} while using the tool.
Reviewed By: #animation_rigging, zeddb, sybren, #user_interface, brecht, Severin, looch
Maniphest Tasks: T81836
Differential Revision: https://developer.blender.org/D9054
In two cases the percentage property was actually used incorrectly, as
pointed out in T82070. The range was [0, 1], but the properties were still
displayed as percentages.
There is a preference to control whether to display factors or
percentages, so it usually doesn't make sense to manually define
properties as percentages.
Resolves T82070
Differential Revision: https://developer.blender.org/D9344
- BKE_bezt_subdivide_handles -> BKE_fcurve_bezt_subdivide_handles
- binarysearch_bezt_index -> BKE_fcurve_bezt_binarysearch_index
These functions are specific to F-Curves and don't make sense for other
uses of BezTriple (curve-object data for e.g.)
Also:
- Move detailed doxygen comment above code, following code-style.
- Mark bezt_add_to_cfra_elem unused.
A follow up to T67212. I missed that the rotation interpolation had its
own code path.
The previous rotation push code was actually wrong (but smooth).
Now all of the actions behave correctly and is smoothly interpolated.
Follow up of b2ee1770d4 and 10c2254d41, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
Both the MS headers and blender headers define the HKEY
which gives all kind of inclusion order issues.
This diff renames all *KEY constants to EVT_*KEY to resolve
this conflict.
Reviewed By: brecht , dfelinto
Differential Revision: http://developer.blender.org/D7164
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
The previous method produced non smooth interpolation results and it was
very hard to control. (At least for me it seemed to be broken until I
actually took a look at what the code actually did)
Now we simply linearly interpolate between the breakdown position and
the current bone data.
Reviewed By: Sybren, Hjalti
Differential Revision: http://developer.blender.org/D5892
There was a mix of old and new constants. Now have one list of WM_CURSOR_*
cursor types, using GHOST standard cursors when available and otherwise falling
back to our custom cursors.
Ref D5197
The old layout of `PointerRNA` was confusing for historic reasons:
```
typedef struct PointerRNA {
struct {
void *data;
} id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
This patch updates it to:
```
typedef struct PointerRNA {
struct ID *owner_id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
Throughout the code base `id.data` was replaced with `owner_id`.
Furthermore, many explicit pointer type casts were added which
were implicit before. Some type casts to `ID *` were removed.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D5558
