Most likely will not compile for others, I'd appreciate any build errors
and missing files reports (I can never seem to get everything committed
and all the build systems working without help).
Porting over the sculpt/multires tools was a breeze,
thanks goes to brecht for a design that didn't exclude
ngons and was easy to port.
Note that I've not tested externally-backed multires
file support yet. Also, I still need to write version
patch code for some cases.
Some notes:
* Like trunk, topological changes don't update multires right,
so e.g. subdivide will duplicate multires data on the new faces,
instead of subdividing it.
* If you set the debug value (ctrl-alt-d) to 1 it'll turn on
my experiments in speeding up sculpting on higher-res multires
meshes (but note it makes partial redraw not completely accurate).
* There's a bug where you have to go through editmode to get out
of sculpt mode, not sure if I inherited or created this myself.
these expose the final start and end after offsets are applied. when set this is like grabbing the handle and moving it.
* made swapping strips shuffle effects and check for overlap.
* Added a User-Pref option for the "XYZ to RGB" colour-mode setting for new F-Curves to compliment the one used for Keying Sets. With this option enabled, the builtin Keying Sets also can obey this option.
* Made all places that were previously manually checking the flags for keyframing to use a standard API function to do this now.
* Fixed bug introduced earlier today in commit 25353 by reverting the changes to keyingsets.c. Forgot that delete_keyframe doesn't handle do the "entire array" hack with array_index = -1
* Fixed bug with the insert-keyframe code for the array_index = -1 case, where too many channels were being keyed (i.e. an imaginary channel was often keyed in addition to the valid ones)
Autokeying for transform functions now gets context-info, allowing for bone paths to be recalculated.
However, the main purpose of this is to allow KeyingSets to eventually have poll functions.
ifdef'd so its not kept in by accident.
Committing because without this animating with the sequencer isnt really usable and am not interensted in having many patches applied on artists systems.
Made scaling selected joints using SKEY work in the same way as in 2.4x
However, it'd probably be nice to be able to have separate hotkeys for this at a later stage.
* Convert all code to use new functions.
* Branch maintainers may want to skip this commit, and run this
conversion script instead, if they use a lot of math functions
in new code:
http://www.pasteall.org/9052/python
Reordering some function calls in transform cleanup to make it simpler (that means other fixes are possible too, sequencer probably don't need it's own freeing function anymore).
Limitations:
1) Parents and children of selected objects are excluded from the pool (siblings are ok) Making it work with that would required unparenting and reparenting after transform, that would turn nasty really quick.
2) Does not support Connected (this could be done through parent links, but see 3 first).
3) Parent relationships in affected objects aren't taken into account. When parent and children in the area of effect, remember that the children will also take the motion of the parents (with additive results). This could perhaps be fixed, but it could be nasty.
Other stuff:
New BASE_EDITABLE macro that checks if base is editable (like TESTBASELIB except it doesn't check for selection)
Add scene parameter to TESTBASELIB_BGMODE macro (using it from current scope is nasty)
* AutoKeying was broken after the fix to get automerge working again in 3D view. The 3D-View check was swallowing the processing before autokeying could be done. Separated these out again.
* The error print when some external data couldn't be found for objects was missing a newline.
* There's an unresolved error in transform_conversions.c which I've flagged in this commit. I'm not quite sure what the exact intentions of that code were (i.e. was the "void_pointer = 1" really intended)
- Generated and uploaded api docs - http://www.blender.org/documentation/250PythonDoc
- Added Edit docs menu item & operators as discussed with Mindrones, Brecht, Stani & Letterip @ bconf, needs some web backend. python operator can aparently use xml/rpc to upload docstrings.
- Added operator invoke function - context.manager.invoke_props_popup(self.__operator__, event)
this calls a popup for invoke by default (which intern calls execute())
- Own recent commit to game framing applied to non-camera views too.
- v3d->persp is deprecated but still used in some places.
- Transforming strips could overlap 1 frame if moving them below frame 0
- Transforming overlapping strips could go into an eternal loop (though overlapping strips should not exist)
Blended shape keys can now be displayed & edited in edit mode. This
is much like showing an armature modifier in edit mode, and shape keys
now are a applied as a virtual modifier (for mesh & lattice only, curve
doesn't fit in the stack well due to tilt).
The main thing missing still is being able to switch between the active
shape key in edit mode, that's more complicated.. but the weights of
other shapes can be edited while in edit mode.
One thing to be careful about is that this does automatic crazyspace
correction, which means that if you edit a shape key with a low value,
the actual vertices will be moved to correct for that and actually move
a (potentially much) longer distance.
Also includes some UI tweaks, mainly placing some buttons horizontally
since the vertical list was getting too long.
* Transform code was not properly fixed to work with the new way that axis-angle data was stored
* The order of the args for the conversion function when switching rotation representations was wrong, causing problems when switching from quaternion to axis angle (i.e. these occurred for newly created bones).
It is now possible to choose from 'Bounding Box' (default), '2D-Cursor', and 'Individual Centers' as the pivot point(s) that rotation/scaling is performed around.
theeth: maybe there needs to be a new SnapMode for this? - SNAP_SELF?, like editmode but without setting t->editob
- dont run special_aftertrans_update on scene objects when after sequencer transform
- invalid pointer was used for getting the sequencer length crashing blender or setting the length to negative values.
- printf_strip(seq) for debugging sequence strip locations
- Spelling: Cheet Sheet -> Cheat Sheet
Updating the sequencer after transform could not use special_aftertrans_update because it relies on data that is freed
theeth: moved the customFree function to run before freeing t->data, t->data2d in postTrans(), checked that customData is not needed.
* Tiny tweak of GL commands used when drawing F-Curves (single GL_LINES instead of multiple GL_LINE_STRIPS) to hopefully improve the performance with heaps of handles drawn a bit
* Spelling fix for initTransDataCurveHandes -> initTransDataCurveHandles
The code for transforming a mixture of keyframes with bezier and non-bezier interpolation was crashing.
The old code only took all the handles when a keyframe was bezier, and one when it was not; but sometimes this underestimated the situation (the first handle is only really used if the previous keyframe was bezier, as per the standard evaluation rules for these, but it didn't really check for this). Now, it just adds them whenever, since there is the possibility that keyframes may be moved before other unselected ones, in which case the handles may become invalid.
Thanks to Lee (from Durian, who found the crash), and Jess Balint (who had submitted a patch with some steps towards fixing this)
This is similar to the old retopo all option but uses the snapping code and not the openGL depth buffer (it's thus more precise).
Not sure if making it available as a snap option is sensible, this is up for discussion.
NOTE: it will get slow fast on large meshes, we need to plug in an acceleration structure into snapping.
This will need an icon too.
* Added a new option for Auto-Keyframing which makes it only insert keyframes for the items included in the active Keying Set.
This only works for Transform Auto-Keyframing so far (other tools will get it added later). The option is disabled by default.
* Fixed bug where adding an 'entire' array to some KeyingSet would only start from the index of the button that the mouse was over at the time
* Made some UI tweaks for Keying Sets buttons (still heaps of missing options there).
The hardcoded paths for rotation keyframes on objects got broken by my commits to rename the rotation properties. I've taken this opportunity to recode the auto-keyframing code here to use the builtin keyingsets instead of going through and manually calling insert_keyframe(), thus preventing this problem in future.
Animating rotations using different rotation modes should now work more often than before.
Previously, quaternion and axis-angle values were stored in the same variable in DNA, but that was causing problems with other animation curves overwriting the values and causing the rotations to not work as expected.
There are still some issues, but I'll track those down later tonight
