The `bisect_distance` in the mirror modifier was hard-coded to `0.001`.
This would result in some unexpected behavior like vertices close
to the mirror plane being deleted or merged.
The fix now adds a parameter to the mirror modifier to expose the
bisect distance to the user. The default is set to the previous
hard-coded value to not "change" previous files.
Ref D10201
Caused by {rB571362642201} where versioning code for new sequencer tool
settings was only done for scenes already having sequencer scene->ed.
If scene->ed was not present, sequencer tool settings were never
initalized for this scene [if the VSE was then used later], leading to
crashes in some places.
Now just use the versioning code to initalize sequencer tool settings
for all scenes not having them yet.
Maniphest Tasks: T87010
Differential Revision: https://developer.blender.org/D10996
The intention with this API function was to temporarily load
ID's tagged LIB_TAG_TEMP_MAIN,
however the way the `real_main` was used,
these ID's were loaded into the G.main.
This introduces a context path to the spreadsheet editor, which contains
information about what data is shown in the spreadsheet. The context
path (breadcrumbs) can reference a specific node in a node group
hierarchy. During object evaluation, the geometry nodes modifier checks
what data is currently requested by visible spreadsheets and stores
the corresponding geometry sets separately for later access.
The context path can be updated by the user explicitely, by clicking
on the new icon in the header of nodes. Under some circumstances,
the context path is updated automatically based on Blender's context.
This patch also consolidates the "Node" and "Final" object evaluation
mode to just "Evaluated". Based on the current context path, either
the final geometry set of an object will be displayed, or the data at
a specific node.
The new preview icon in geometry nodes now behaves more like
a toggle. It can be clicked again to clear the context path in an
open spreadsheet editor.
Previously, only an object could be pinned in the spreadsheet editor.
Now it is possible to pin the entire context path. That allows two
different spreadsheets to display geometry data from two different
nodes.
The breadcrumbs in the spreadsheet header can be collapsed by
clicking on the arrow icons. It's not ideal but works well for now.
This might be changed again, if we get a data set region on the left.
Differential Revision: https://developer.blender.org/D10931
This removes a lot of unnecessary code that is generated by
the compiler automatically.
In very few cases, a defaulted destructor in a .cc file is
still necessary, because of forward declarations in the header.
I removed some defaulted virtual destructors, because they are not
necessary, when the parent class has a virtual destructor already.
Defaulted constructors are only necessary when there is another
constructor, but the class should still be default constructible.
Differential Revision: https://developer.blender.org/D10911
This code is incompatible with .blend files from subversion 16 and 17.
The ideal would be to create a new subversion when landed rBf674976edd88.
But for now, due to the delay, moving the code to the previous subversion
can solve it.
Since you can already specify a separate size for X and Y with the
grid node, it makes sense to be able to specify the size separately
for each axis also.
This also avoids some awkward math with a Transform node afterwards
when you want a specific size for each direction.
Versioning (except for animation and drivers) is handled in this commit.
Differential Revision: https://developer.blender.org/D10834
This fixes T86440
As the CU_2D flag is set for nurbs, a Curve can have 2D nurbs mixed with 3D.
But the UI does not allow this mixing. It updates all nurbs to 2D or 3D when set.
So remove this specific flag for nurbs.
This may break old files, since 2D curves with mixed 3D are now set as 3D.
Differential Revision: https://developer.blender.org/D10738
Previously, `node_name` was rarely actually a name of a node. It is set
correctly as node name in `ED_node_tree_push`. However, later on it
was overwritten by the name of an id data block in `node_draw_space`.
Now, the node_name stays the name of the "parent" node. Whereas
display_name is the name that will be displayed in the breadcrumbs.
With this change, the `node_name` can be used to reconstruct the
actual path from the root node tree to the currently visible tree.
Differential Revision: https://developer.blender.org/D10874
This simulates the effect of a honeycomb or grid placed in front of a softbox.
In practice, it works by attenuating rays coming off-angle as a function of the
provided spread angle parameter.
Setting the parameter to 180 degrees poses no restrictions to the rays, making
the light behave the same way as before this patch.
The total light power is normalized based on the spread angle, so that the
light strength remains the same.
Differential Revision: https://developer.blender.org/D10594
For other "Attribute Name" fields we usually give a more specific name
that relates to what the attribute is actually used for, like "Mask" in
the point separate node. This is a similar situation, and would also
be consistent with the naming planned in D10506.
Use LISTBASE_FOREACH instead.
SEQ_CURRENT_BEGIN did null checks, so now these must be explicit.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10823
Display the bone axes at the head (root) of the bone by default, instead
of the tail (tip), and add a slider so that it's possible to adjust this
position.
Versioning code is in place to ensure existing files behave the same
(axes shown at tail), whereas new Armatures will be using the new
default (axes shown at head).
Reviewed By: #animation_rigging, #user_interface, Severin, Sybren
Differential Revision: https://developer.blender.org/D7685
Although "Grid" may not be techincally correct since a grid could be 3D,
it was decided to rename the "Plane" primtive to "Grid". The primitive
node allows subdivisions, so the name is more consistent with the
operator in the 3D view.
Ref T86819
This commit includes a file subversion bump for the versioning.
CacheFile writing code would not write generic ID data (call for it has
been missing since the initial commit, rB61050f75b13e).
While potentially affecting other areas (mostly CustomProperties/IDProperties),
this was a critical failure for liboverrides. Also added some workaround
code to allow opening broken files (though the override of the CacheFile
data-block will be lost).
This adds 2 new sliders for light objects that modulates the diffuse
light and the volume light intensities.
This also changes the way volume light is computed using point lamp
representation. We use "Point Light Attenuation Without Singularity"
from Cem Yuksel instead of the usual inverse square law.
This introduces two functions to the blenloader module, here shown as
calls for brevity:
* `temp_lib_ctx = BLO_library_temp_load_id(real_main, blend_file_path, idcode, idname, reports);`
* Now the data in `temp_lib_ctx->temp_id` can be used (but ought not to
be not assigned to non-temp datablocks).
* `BLO_library_temp_free(temp_lib_ctx);`
The first loads a datablock from a blend file, and returns it as part of
a `struct TempLibraryContext`. This struct contains the temp-loaded ID,
as well as enough information to correctly free everything again.
Differential Revision: https://developer.blender.org/D10736
Following concerns raised in the commit that changed the name initially,
rB2e19509e60b39837, it makes more sense to keep the "Surface" name for
this node because it has a specific meaning that should not be confused
with other types of subdivision.
Build proxies automatically when added to sequencer timeline and when
switching preview size.
This behavior can be disabled in user preferences.
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10363
- Remove Full Render size from VSE preview size. Use just 100% instead.
- Add Use Proxies checkbox to control whether proxies are used globally
- Move preview size to top so it is most prominent
- Set default to 100% preview size and use proxies
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10362
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
Attempt to work around some full-corruption cases created at the studio.
Not clear how those were created, so not really fixing anything here,
just detecting and 'solving' as best as possible some high corruption of
local overrides.
This is good to have in general anyway, might help prevent further
corruption to happen too.
This implements the status bar as footer region in the
spreadsheet editor.
It shows the total number of rows and columns as well
as how many rows are actually visible (based on the filter).
The implementation stores the stats in a runtime struct during
drawing and the status bar reads from that struct.
Ref T86142.
Differential Revision: https://developer.blender.org/D10693
Previously all blend files included the path they were saved,
causing files distributed publicly to include users local paths.
This also included developers home directories for startup & userprefs
defaults & app-templates bundled with Blender.
Now recovery information is only written for auto-save & quit.blend
since this is the only time they're intended to be used.
Add new function `blo_bhead_is_id_valid_type()` to correctly check the
blend file block type.
File block type codes have four bytes, and two of those are only in use
when these blocks contain ID datablocks (like `"OB\0\0"`). However,
there are other types defined in `BLO_blend_defs.h` that have four
bytes, like `TEST`, `ENDB`, etc.
The function `BKE_idtype_idcode_is_valid(short idcode)` was used to
check for ID datablocks while reading a blend file. This only takes a
2-byte parameter, and thus its result is invalid for the 4-byte codes.
For `TEST` blocks, it would actually consider it a `TE` block, which is
a valid identifier for a Texture. This caused the heap buffer overflow,
as the datablock is not a valid ID, and thus the bytes that were
expected to form an ID name actually encode something completely
different.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D10703
This makes the following changes to the name of the two
geometry nodes subvision nodes:
- `Subdivision Surface` -> `Subdivide Smooth`
- `Subdivision Surface Simple` -> `Subdivide`
Most of the benefit is that the names are shorter, but it also better
mirrors the naming of operations in edit mode, and phrases the names
more like actions. This was discussed with the geometry nodes team.
This adds the initial boilerplate code that is required to introduce
the new spreadsheet editor. The editor is still hidden from the ui.
It can be made visible by undoing the change in `rna_screen.c`.
This patch does not contain any business logic for the spreadsheet editor.
Differential Revision: https://developer.blender.org/D10645
Ref T86279.
This adds support for creating a `BlendFile` (internally called `Main`),
which is limited to a context.
Temporary data can now be created which can then use
`.libraries.load()` the same as with `bpy.data`.
To prevent errors caused by mixing the temporary ID's with data in
`bpy.data` they are tagged as temporary so they can't be assigned
to properties, however they can be passed as arguments to functions.
Reviewed By: mont29, sybren
Ref D10612
But this time the root cause. Writing undo files is done in a separate
thread. This patch moved the updating of the matte_id when the user
actually changes the matte.
The `MAX_LIBARRAY` define was an annoying doublon to the `INDEX_ID_MAX` enum value
now defined in `DNA_ID.h`, and it is no more useful.
And comments were somewhat outdated. Also added an explanation about
chosen order for the `INDEX_ID_<IDTYPE>` order.
Move low level logic to module code and versioning logic to versioning code.
Metas strip position was handled in diffrent way compared to other strips.
This was introduced in c8b0d25794 as bugfix for T28158.
I disagree with such design. Meta strips should be handled in same way as
any other strips.
I have tested this change and haven't found any problems.
No problems after checking T28158 as well.
There should be no functional changes on user level.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9972
I made an incorrect comment in patch review that "Location"
should be used instead of position. "Position" is more appropriate
here since it refers to generic data rather than an object origin.
"Position" is also the name we chose for the attribute for this reason.
This patch adds an output field to the Attribute Proximity node and
renames the existing string socket from "Result" to "Distance".
- The "Distance" output contains distance to the closest position
on the Target geometry.
- The new "Location" output contains the coordinates of the closest
position on the Target geometry.
A basic use case for this data is a simple shrinkwrap operation.
Differential Revision: https://developer.blender.org/D10415
This patch adds manifest parsing to Cryptomatte. Normally when loading
cryptomatte layer from an OpenEXR file the manifest contains data to
convert a hash to its original name of the object/material. In the
future we want to use this to support lookup of cryptomatte
hashes and show it to the user.
Currently this logic isn't available to users (for now), but is required
by D3959 where a new cryptomatte workflow is implemented.
