Fix regression with roughness not masking reflections when not using
Screen Space raytracing.
The trick was to only evaluate one planar per pixel, the one with
the most influence. This should not be too limiting since this is what
we do for SSR.
Also change evaluation order do not apply occlusion on planars probes.
- Fix noise/banding artifact on distant geometry.
- Fix overshadowing on un-occluded surfaces at grazing angle producing "fresnel"
like shadowing. Some of it still appears but this is caused to the low number
of horizons per pixel.
- Improve performance by using a fixed number of samples and fixing the
sampling area size. A better sampling pattern is planned to recover
the lost precision on large AO radius.
- Improved normal reconstruction for the AO pass.
- Improve Bent Normal reconstruction resulting in less faceted look on
smoothed geometry.
- Add Thickness heuristic to avoid overshadowing of thin objects.
Factor is currently hardcoded.
- Add bent normal support to Glossy reflections.
- Change Glossy occlusion to give less light leaks from lightprobes.
It can overshadow on smooth surface but this should be mitigated by
using SSR.
- Use Bent Normal for rough Glossy surfaces.
- Occlusion is now correctly evaluated for each BSDF. However this does make
everything slower. This is mitigated by the fact the search is a lot faster
than before.
Previously, methods like `Span.drop_front` would crash when more
elements would be dropped than are available. While this is most
efficient, it is not very practical in some use cases. Also other languages
silently clamp the index, so one can easily write wrong code accidentally.
Now, `Span.drop_front` and similar methods will only crash when n
is negative. Too large values will be clamped down to their maximum
possible value. While this is slightly less efficient, I did not have a case
where this actually mattered yet. If it does matter in the future, we can
add a separate `*_unchecked` method.
This should not change the behavior of existing code.
Expanded enum items like this usually have centered text, but there are
limitations in the popup code that break this here. Add a workaround for this
limitation.
Differential Revision: https://developer.blender.org/D9854
Reviewed by: Julian Eisel
This patch adds a to_curve method to the Object ID. This method is
analogous to the to_mesh method. The method can operate on curve and
text objects. For text objects, the text is converted into a 3D Curve ID
and that curve is returned. For curve objects, if apply_modifiers is
true, the spline deform modifiers will be applied and a Curve ID with
the result will be returned, otherwise a copy of the curve will be
returned.
The goal of this addition is to allow the developer to access the splines
of text objects and to get the result of modifier applications which was
otherwise not possible.
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D10354
Previously the same functions were used to both set and get the active
state for outliner tree elements. This has quite a few problems.
- It's hard to tell when data is changed or simply read
- It prevents using `const`
- The code is full of if statements, making it longer and less readable.
This commit replaces the `tree_element_type_active` and
`tree_element_active` functions with `_get` and `_set` variants. One
has const arguments and returns the active state, the other deals only
with setting the state. While this refactor results in slightly more
lines of code, the result is much better in my opinion.
This commit also removes unused variables from arguments of the affected
functions.
Differential Revision: https://developer.blender.org/D10232
This commit adds a simple string input node, intended for use in the
attribute workflow to make using the same attribute name in multiple
places easier. The node is function node similar to the existing vector
input node.
Ref T84971
Differential Revision: https://developer.blender.org/D10316
This makes the nodes look more consistent with the rest of the UI
by using the same split with right aligned labels as the property editor
and elsewhere. Additionally, for consistency, the "Type" part of some
dropdowns is removed. It already wasn't displayed everywhere, and
it gets redundant quite quickly.
The "Hide Collection" operators assigned to the number keys in edit mode
trigger a redraw of the outliner, but as an optimization, they do *not*
trigger a rebuild of the tree.
This optimization is valid because unlike the collection exclude toggle,
the heirarchy is not affected by collection visibility. However, it means
that currently you must trigger a rebuild to get the correct "grayed out"
status after using the operator.
Rather than trigger a rebuild in this case to solve the bug, this patch
moves the decision for whether to gray out the text of a tree element
to the draw step rather than the build step. This means that any change
to the corresponding properties doesn't require a full tree rebuild.
Note that changing the "hide_viewport" property from the outliner still
causes a tree rebuild. I think that's because of the checks in
`outliner_collection_set_flag_recursive_fn`.
That could be optimized in the future.
Differential Revision: https://developer.blender.org/D10240
Add the Simple subdivision option to Geometry nodes, as a new node
instead of part of the existing subdivision node because of future
backend changes to the Simple option. (See T85584)
https://developer.blender.org/D10409
This reverts commit 7ee518cf70.
Causes T84869. The initial issue is less bad than this. We are looking into
alternative fixes for 2.93 (see D9854 and D9853).
This adds fuzzy search functionality to various input fields in Blender
where one can choose a value from many existing values (e.g. the
Vertex Group property in the Displace modifier).
Differential Revision: https://developer.blender.org/D10446
Following with the changes included to interpolate strokes of different number of points, a full review has been done in the interpolation tools.
* Interpolate now is a tool and not an operator. It was not logic to have this tool as a button.
* Interpolate tool parameters have been moved to topbar.
* Interpolate popover has been removed from topbar and interpolate `Sequence` operator has been moved to grease pencil menu.
* Interpolate Sequence now include a Redo panel.
* Interpolate tool now allows to select the strokes by pairs. This allows to interpolate any stroke with any stroke and not as before that it was only possible by drawing order. If no stroke is selected, the interpolation is done as before.
* Now is possible interpolate again if a previous keyframe exist. Before, it was impossible to interpolate two times in same frame and this made impossible to do the interpolation by groups of frames.
* New automatic option to `Flip strokes` if the stroke and end are not in the right position. Also the flip can be set manually for corner cases.
* Cleanup of menus related to interpolate.
* Fixed some bugs and removed parameters from scene because now all are tool or operator contained.
* Some code cleanup and function renames.
This commit also includes the some codebase to future implementation of the concept `Vertex Active` that now does not exist in grease pencil.
This patch implements the list panel system D7490 for FCurve modifiers.
The UI layouts are updated to make use of subpanels and to be consistent
with the rest of the interface, and easier to understand.
See the differential revision for screenshots.
This commit also significantly cleans up the FModifier UI code, and
improves, mainly by replacing the old button creation code is with
the newer interface API using RNA. In turn there is a bit of complexity
added because each FModifier has a separate panel.
Although reordering of FModifiers was not implemented before, we get
drag and drop basically for free here, so it is also included.
As noted in some older to do tasks, FModifiers aren't evaluated
in perfect order, which may be a point of improvement for the future.
Differential Revision: https://developer.blender.org/D7997
The problem was introduced fixing task T85035.
As the frame was set again when render, if there was a time modifier, the frame was not remaped to the right frame number.
Previously, functions would have to ask for every geometry type explicitely.
Using a vector is return type is fine. In practice this will probably never
allocate because of the small buffer optimization in vector.
If the axes are aligned in auto pivot mode then the rotation axis would be (0,0,0).
We now fall back to the x axis in this case. If that fails, we fall back to the y axis.
Differential Revision: https://developer.blender.org/D10466
Previously, the density was set per point. That implies that when a
point has a non-zero weight, points might be distributed in all
connected polygons. By specifying the density per corner, this
limitation is removed. Note, per-point density maps (such as vertex
groups) can still be used. They will be adapted to the corner domain
without loss of information.
Differential Revision: https://developer.blender.org/D10461
Crash happened in versioning code on NULL dereference in function
seq_convert_transform_crop() for Strip crop and transform
fields.
Strips created after rB1fd7b380f4cf were assumed to have crop and
transform always initialized, but this wasn't the case. This has been
fixed in 2.90, but not in versioning code.
Initialize these fields if they are not initialized already.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10463
