This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
flipped to bottom
While flipping the header to bottom works in the MCE (because MCE doesnt
allow overlapping UI) we need to take the regions visible rect into
account for the Image Editor.
Also correct clickable scubbing area (poll for frame_change) in the
Image Editor and the MovieClip Editor not taking UI_DPI_FAC into
account.
Maniphest Tasks: T70905
Differential Revision: https://developer.blender.org/D6090
For many users, this will make the File Browser window behave more like
what they would expect. It addresses the issue of the File Browser
becoming hidden behind the main window by clicking anywhere in the
latter. It communicates the interruptive, but temporary nature of the
operation a bit better.
Further, on tiling window managers the File Browser now opens as
floating by default, like in other applications.
Note that this also makes sure the File Browser is always opened as
separate window, so it doesn't re-use the Preferences, or any other
temporary window anymore. This seems to have been a common annoyance.
More concretely, this makes the File Browser window behave as follows:
* Stays on top of its parent Blender window, but not on top of
non-Blender windows.
* Minimizes with its parent window
* Can be moved independently
* Doesn't add an own item in task bars
* Doesn't block other Blender windows (we may want to have this though)
* Opens as floating window for tiling window managers (e.g. i3wm/Sway)
Further notes:
* When opening a file browser from the Preference window (or any
temporary window), the main window, as the file browsers parent is
moved on top of the Preferences, which makes it seem like the
Preferences were closed. This is the general issue of bad secondary
window handling as window activation changes. I made it so that the
window is moved back once the file browser is closed.
This behavior is confusing and would be nice to avoid. It's a separate
issue though.
* On most window managers on Linux the temporary window can not be
minimized and maximized, they disable that for dialog windows.
* On Windows and macOS, only minimizing is disabled, as there is no
decent way yet to restore a window if it's not shown in the taskbar.
Reviewed By: Brecht van Lommel, Campbell Barton, William Reynish
Edits and macOS implementation by Brecht.
Differential Revision: https://developer.blender.org/D5810
Part of T69652.
When a mesh is pinned in the properties panel, Blender crashes when you
click the "Add Custom Split Normals Data".
The code calls `ob = ED_object_context(C)` which returns NULL when the
mesh is pinned in the properties panel, causing a segfault when trying
to get the mesh via `ob->data`.
A new function `ED_mesh_context(C)` avoids this by first checking
whether a mesh was pinned in the context. If not, it checks the pinned
object's data. If that's not there, or it's not a mesh, it returns the
active object's mesh. Finally it returns NULL if there is no active
object, or if the active object is not a mesh object.
Reviewed By: brecht, mont29
Differential Revision: https://developer.blender.org/D5223
Internally tool settings have been moved to the 3D view.
Added the ability for to draw panels from another space/region
so they can be mirrored in the properties editor.
The main reason for this change is to allow setting the
active frame with the left mouse button, while still being
able to select e.g. keyframes with the same mouse button.
The solution is to introduce a new scrubbing region with
a specialized keymap. There are a couple of related todos,
that will be handled in separate commits.
Those are listed in D4654.
This solves T63193.
Differential Revision: https://developer.blender.org/D4654
Reviewers: brecht, billreynish
- Resizable areas use 2D view bounds.
- Header uses the button bounds.
- A margin is added to avoid clicking between buttons.
- Region resize edges clamp to the 2D view bounds.
Resovles T61554
Each space had separate operators, duplicating logic.
Use RNA properties instead so adding the ability to toggle other
region types (floating redo region for eg) doesn't need to have an
extra operator per space type.
It's also nicer to show a check-box for something which can be toggled.
* It can be hidden by dragging it up/down.
* It can be at the top or bottom, independent of the header.
* It uses the color theme from the header.
* It does not change its color, when the area becomes active.
Currently, it is used in the text editor to display the file path.
Differential Revision: https://developer.blender.org/D4601
Add Object.local_view_get/set
Alternate fix which supports removing from local view & checking
if an object is in local view.
Also avoids redundant refresh.
Matches 2.7x Object.layer_local_view capabilities more closely,
without exposing the flag directly.
Add getter callback support for 'WM_HANDLER_TYPE_KEYMAP' type handlers
this is needed for key-maps which change based on the active tool.
Replaces 'sneaky_handler' hack which temporarily inserted a handler.
This is a request by the studio here to make it possible to see how
many samples were used to render a specific shot or a frame. It is a
bit more tricky than simply stamping number of samples from a scene
since rendering is happening in multiple ranges of samples.
This change makes it so Cycles saves configured number of samples for
the specific view layer, and also stores start sample and number of
samples when rendering only a subrange of all samples.
The format used is "cycles.<view_layer_name>.><field>", which allows
to have information about all layers in a multi-layer EXR file.
Ideally we can store simplified "cycles.<field>" if we know that there
is only one render layer in the file, but detecting this is somewhat
tricky since Cycles operates on an evaluated scene which always have
single view layer.
The metadata is shown in the Metadata panels for clip, image and
sequencer spaces.
Example screenshot which shows the metadata:
{F6527727}
Reviewers: brecht
Reviewed By: brecht
Subscribers: fsiddi
Differential Revision: https://developer.blender.org/D4311
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
(Part 1 was 00963afc14978b)
Does the following changes visible to users:
* Use panels and sub-panels for more structured & logical grouping
* Re-organized options more logically than before (see images in D4148)
* Use flow layout (single column by default).
* New layout uses horizontal margin if there's enough space.
* Change size of Preferences window to suit new layout.
* Move keymap related options from "Input" into own section.
* Own, left-bottom aligned region for Save Preferences button.
* Adjustments of names, tooltips & icons.
* Move buttons from header into the main region (except editor switch).
* Hide Preferences header when opened in temporary window.
* Use full area width for header.
* Don't use slider but regular number widget for UI scale.
* Gray out animation player path option if player isn't "Custom"
Internal changes:
* Rearrange RNA properties to match changed UI structure.
* Introduces new "EXECUTE" region type, see reasoning in D3982.
* Changes to panel layout and AZone code for dynamic panel region.
* Bumps subversion and does versioning for new regions.
RNA changes are documented in the release notes:
https://wiki.blender.org/wiki/Reference/Release_Notes/2.80/Python_API/Preferences_API
Design & implementation mostly done by @billreynish and myself.
I recommend checking out the screenshots posted by William:
https://developer.blender.org/D4148#93787
Reviewed By: brecht
Maniphest Tasks: T54115
Differential Revision: https://developer.blender.org/D4148
Modifiers
Since user menu entries from SPACE_BUTS/SPACE_TOPBAR are also shown in
other Editors (SPACE_VIEW3D), also allow these entries to be removed
from Quick Favorites from these Editors.
Match and deduplicate logic from screen_user_menu_draw() and
ui_popup_context_menu_for_button().
Reviewers: campbellbarton, brecht
Maniphest Tasks: T58327
Differential Revision: https://developer.blender.org/D4112
It was a bit odd that the scene was stored per window but not the view
layer. The reasoning was that you would use different view layers for
different tasks. This is still possible, but it's more predictable to
switch them both explicitly, and with child window support manually
syncing the view layers between multiple windows is no longer needed
as often.
* Main windows show a topbar and statusbar, and select a workspace and
scene. They are created with Window > New Main Window.
* Child windows do not show a topbar or statusbar. These follow the
workspace and scene of their parent main window. Created with Window >
New Window or View > Duplicate Area into New Window.
* The purpose of this change is to support multi monitor setups where you
just want to put more editors on the other monitors. Without multiple
topbars and statusbars, working within a single workspace and scene.
Creating multiple main windows is intended to be a concious choice to
do different tasks in different workspaces and scenes.
* Note these changes do not currently affect how the operating system
treats the windows.
* When changing the workspace, the layout in all child windows changes.
This makes sense if we consider child windows to be just a way to
extend the main window across more monitors. In some case it may be
useful to keep the same layout though, we can add an option for this
depending on user feedback.
For example collapsing the lower part of the topbar with 2x interface scale
would hide the top-bar header region. There were also more asserts when changing
window size and moving area edges afterwards (same assert as in T55298).
Fixes are similar to e626998a26.
With all the recent fixes I've done, area geometry handling should be stable
again. Let's hope I'm right :)
Key shortcuts and explanation about how to use the tool should go to the
status bar, but other info can in the header so it's near where the user
is working. This distinction has not been made yet for all operators.
