During the 3.3 release some packages were missing
in SVN during the release and it ended up building
the release tarball without issues when re-running
the `make source_archive_complete` command after it
failed initially. The tarball however had 0 byte files
for the missing packages.... not good.
This diff hardens the download process by :
1) Validating all required variables are set. This
catches the erroneously attempt at downloading the
nanovdb package even though we have removed it
from versions.cmake but neglected to remove it
from download.cmake
2) When a download fails (due to either a missing
package, or bad download URL) FILE Download will
warn about a hash mismatch but will carry on
happily, you then have to go into the file system
go delete the 0 byte file to retry the download.
We know for a fact the file is bad when it is 0
bytes, just delete it.
3) When we are using the blender repository
(and likely building a source archive) explicitly
validate the hash of all packages. Normally the
build process does this, however when building
a source archive the build does not actually
run for a dep. So preform this check during the
configuration stage.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16124
Completely skip the work of interpolating domains for single values
for many to and from combinations. Similar to 535f50e5a6,
but slightly more complex because of the possibility of loose elements
on some mesh domains.
From D16054, with added comments.
Unfortunately this commit changed behavior in a fundamental way that
can't be addressed without larger changes. Previously the position
outputs were evaluated on the edge domain and then interpolated to the
context domain, which could be useful for some rudimentary mesh smoothing.
After the commit they were just evaluated at the specified index, which
looks practically random when evaluated on a different domain. We may need
a new node that doesn't have the implicit behavior in the future.
This reverts commit 4ddc5a936e.
There were two issues with the unit extraction regex:
- it didn't take the inches, feet, arcminutes and arcseconds symbols
into accounts, which aren’t letters but ' and ";
- some units have more than one B_UNIT_DEF_* flag.
This allows extracting feet, inches, square millimeters, cubic
millimeters, arcminutes, and arcseconds.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16144
- Active Track (NLA vs movie clip)
- New (file)
- Object Index (loop cut)
- Object Index (render pass)
- Proxy Storage (sequence)
- Rim (Solidify modifier)
- Roughness (particle children)
- Spaces (text whitespace)
- Out (sequencer wipe transition)
Also make new asset tag name translatable.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16067
These item names and descriptions never got extracted because they're
not in the RNA until the proper context occurs, and so the extraction
script never even knew about them.
The properties are mostly located in the fluids UI.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15994
RNA code to create new actions did not properly remove the extra user
set by default, as done in other `new` callbacks of other ID types.
NOTE: Mask ID had the same issue, also fixed in this commit.
NOTE: At some point this needs to be properly fixed, default super-low
level ID creation code should simply not add a 'default' user, this is
extremely bad design and forces higher-level code to do all kind of
extra work to get rid of it half of the time, in very unclear and
confusing ways and places.
Blender is using more and more temporary Main data-base (historically
for reading linked data, but also now when resyncing liboverrides, for
temp data in asset code, etc.).
This commit aims at making this a bit more formal and defined, by:
* Adding a dedicated flag in Main struct to mark a Main as global.
* Adding some API to replace, or temporarily swap the current global
Main (`G_MAIN`) by another one.
NOTE: Having to temporarily replace `G_MAIN` is a workaround for the
limitation of current RNA, ideally this should be fixed in RNA itself,
but for now at least having an API helps tracking those cases (since
this is potentially risky operation).
This work is also a preparation for more usages of temp mains in the near
future (Asset Brushes and its presets system e.g. will most likely use
temp mains too).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15977
To the user, this looks like a disfunctional thing (usually greying out
is used for props having no effect).
The greying out is caused by
{rB8b7cd1ed2a17e40661101eea4adae99e8e3d02e9}.
Above commit disabled the direct renaming of images in the
`TEXTURE_UL_texpaintslots` UIList (and instead displays the texture slot
directly as a prop -- which has its `PROP_EDITABLE` flag cleared)
(from the commit message):
> A limitation of this patch is that is isn't possible anymore to rename
images directly from
> the selection panel. This is currently allowed in master. But as
CustomDataLayers
> aren't ID fields and not owned by the material supporting this wouldn't
be easy.
To work around the UI confusion (but still keep the non-editable nature
of the property), now just display this as a label.
Maniphest Tasks: T101334
Differential Revision: https://developer.blender.org/D16138
Was not passing user_data to id_override_library_delete_hierarchy_fn.
Also correct a wrong assert.
Greenlit by @mont29 in T101306.
Should also go into 3.3 LTS.
Saving non app-template preferences would use add-ons and other
app-template settings to write the default preferences if there was no
existing user preferences file saved.
Suppress warning when saving app-template preferences.
Check if the preferences exist before attempting to read them,
while harmless it looked as if something went wrong.
- Document the behavior of app-template IO for preferences.
- Add doxy-sections for each kind of blend file IO.
- Clarify BKE_blender_userdef_app_template_data_swap doc-string.
The code already had a check for meshes with zero triangles, but it
didn't catch the case where all triangles are flagged as degenerate.
A simple way to reproduce this is to take a mesh and scale it to zero.
After checking the code, it turns out that in this case it's supposed
to just set all tangents to zero, so the fix simply is to detect this
case and skip the computation.
Add function `SEQ_time_content_end_frame_get` to get content end frame.
New function is shorthand for
`SEQ_time_start_frame_get() + SEQ_time_strip_length_get()`.
This versioning needs to be done after linking in order to affect
animation data which might not be loaded in the regular "do_versions"
loop. Animation data is removed in `nodeRemoveNode`.
Fixes T101439
To avoid issues with install_deps. If we more generally switch to using
CMake configs then perhaps this code can be deduplicated again or at
least simplified.
This change speeds up the compilation at the cost of higher memory usage.
CMake implementation checks the amount of available memory to spawn a
reasonable number of parallel compiler jobs.
On GCC, the loops created by `BLI_VEC_OP_IMPL` were not always
unrolled, leading to branching. For `attribute_math::mix4<float3>`,
this lead to a significant performance regression compared to its
older `interp_v3_v3v3v3v3` counterpart.
Instead of a using macros to create the for loops, use variadic
templates to manually unroll them. The compiler might do it anyway
(I didn't observe any effect on Clang in my tests), but there should
be no reason not to unroll these small loops, and making it explicit
and removing use of macros seems better.
On a Ryzen 3700x, this commits doubles the performance of Catmull
Rom curve position evaluation (from 18-19ms to around 9-10ms).
Differential Revision: https://developer.blender.org/D16136
After rB188f7585a183 deleting the object results in crash due
to null pointer access if collections are filtered out
Reviewed by: mont29
Differential Revision: https://developer.blender.org/D16031
Fix for T101438
Clamping the mip seems to always set it to 9.0.
I couldn't find an alternative way to avoid triggering the error (ie. min(mip, 9.0)).
In any case, the results with this patch applied look the same to the (correct) ones on AMD.
And, since clamping the max mip to a hardcoded value could result in resolution-depended behavior, I guess disabling the clamp should be ok anyway.
Reviewed By: fclem
Maniphest Tasks: T101438
Differential Revision: https://developer.blender.org/D16129
Change some wording of tooltips for readability, in animation-related
areas (drivers, keying sets, animation channel visibility).
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16131
