- use the scene context for the unit settings since there isn't a better place for it currently.
- added 'chain' to imperial units
- set more rna props to be distances and angles.
long/short units...
day,d, hour,hr,h, minute,min,m, second,sec,s, millisecond,ms, microsecond,us
Also may fix some bugs that were reported.
Note, to convert fps to time evil_C needs to be used to get the scene.
- currently only distances work.
- user preferences, edit section to set the units and scale.
- option to display pairs (nicer for imperial display?)
- support for evaluating multiple comma separated values eg: 2',11" ..or.. 5ft, 4mil
- comma separated expressions/values accumulate 1+1,2**3,4cm/3
- attempted fast conversion from a value to a string so button drawing isn't too slow.
* imperial long/short *
- mile, mi
- yard, yd
- foot, '
- inch, "
- thou, mil
* metric long/short *
kilometer, km
meter, m
centimeter, cm
millimeter, mm
micrometer, um
nanometer, nm
picometer, pm
* Disable shaded mode for now, it cause too many crashes combined
with preview render, will be fixed properly later.
* Make 3d view toolbar region a bit wider. Ideally this would not
be needed, but the sculpt/paint buttons just don't fit otherwise.
* Revert change to icon/text spacing in buttons, it breaks text
editing and clipping. Will properly fix this later so changing
the spacing can be done centrally.
* Fix for grease pencil simplify stroke python error. Now button
is hidden (as in 2.4), but still available through outliner.
* Fix for memory leak in UI code, when using ctrl+Q menu.
* Fix submenu > icon being drawn on some buttons where it was not
needed.
Note...
- Python3.1 you don't need to add the .0 for divisions anymore (was esp annoying for button eval)
- Simple dimension input, imperial mi/yd/ft/in, metric km/m/cm/mm, Later could display these values and have a pref for scene scale, atm it assumes 1BU == 1m.
* Text editing in buttons now hides the label, to give more space.
* Tweak slider buttons text clipping, happened a bit too early.
* Move editing text closer to the left, because the < > buttons
are not visible then anyway.
First step towards keymap editor!
Before getting too excited:
- doesn't save yet
- no rna properties can be defined
- no insert/remove keymap options yet
- no option yet to set 'key press/release'
But what does work;
- Keymap list is in outliner, new category
(Keymaps are listed in order as being created now)
- enable/disable a keymap entry: click on dot icon
- it displays python api names for ops
- browse new operator for keymap (menu button)
- set keymap to use other keys, mouse or tweak events
- four modifier key options
I first intent to test it all well, there are still
quite some modal map conflicts (like border select) and
there's problems assigning items to tweaks
Another issue is that a visual editor for keymaps might be
quite hard to use... the amount of data and options is just not
so fun for a buttons menu. There are ways to improve this though.
Maybe do this via a script?
Outliner: brought back to near full functioning:
- proper operators, like for open/close items, exec operations
(note: select is still same operator as activate, should
become modal ops later)
- rename works again (ctrl+click)
- proper notifiers for redraws
- select / extend select works again
- editmode in/out works again
- enter key opens/closes again
- right mouse operations work again
Didn't do:
- options for Sequence strips
- signals to change button views on clicks
- error/warning messages
UI:
- added new uiButSetRenameFunc(), which passes on the old name
- added uiButActiveOnly(), which ensures a button gets created in
active state, and gets removed when used. Needed for editing
names in outliner.
Andrea: check outliner.c for uiButActiveOnly(), very easy to use!
Also:
- Added posemode operator, CTRL+TAB tied to it.
* List template visual changes. Items now look different,
and it expands to size 5 as more items are added.
* Added LISTROW and LISTBOX elements. The former is like
a typical ROW button, but looks diffrent. The latter
looks like a BOUNDBOX, and has no extra features yet.
* Fix some glColor3ubv warnings with casting, did not find
a nicer way.
* Text window font size now supports full range 8-32, instead of
just 12 and 15. I added BLF_fixed_width to get the character
width of a fixed size font.
* Buttons do undo push on change again.
* Animated/Keyframe/Driver colors are now themable, with blend
value to blend with original color. Set this to 0.5 now to
give colors less constrast.
* Fix tooltip popping up with RMB menu open, and missing redraw.
* Autokeyframe now works for buttons.
* Driver expressions can be edited in place in a button now.
(still some refresh issues).
* Also made python driver default for the Add Driver function
in the RMB button. This way you don't have to open a Graph
editor if you just want to type an expression. Also, the
default expression then is the current value.
* Tooltips now show some extra info, not sure what is good to
have, but currently I added:
* Shortcut key for operator buttons.
* Python struct & property name for RNA buttons.
* Expression for driven values.
* Value for text/search/pointer buttons.
* Enums can now be dynamically created in the _itemf callback,
using RNA_enum_item(s)_add, RNA_enum_item_end. All places asking
for enum items now need to potentially free the items.
* This callback now also gets context, this was added specifically
for operators. This doesn't fit design well at all, needed to do
some ugly hacks, but can't find a good solution at the moment.
* All enums must have a default list of items too, even with an
_itemf callback, for docs and fallback in case there is no context.
* Used by MESH_OT_merge, MESH_OT_select_similar, TFM_OT_select_orientation.
* Also changes some operator properties that were enums to booleas
(unselected, deselect), to make them consistent with other ops.
* 3D view Object menu works again, many operators missing still
because they are not yet implemented.
* Constraint types now have separator, and fix too much spacing
in the constraints header.
* Context panel now draws without header, with arrows, no scene name.
* Softbody vertex group search popup.
* Improve names for autogenerated shortcut keys in menus.
* Make most Select menus in the 3D view header work.
* Fix armature border select selection syncing.
* Add POSE_OT_select_constraint_target,
MESH_OT_select_by_number_vertices, MESH_OT_select_vertex_path.
* Merge mesh select similar into one operator.
* Don't give MESH_OT_select_random Space hotkey.
* Add DAG_object_flush_update to many mesh edit tools, not calling this
will crash with modifiers.
* RNA_def_enum_funcs for dynamic enums in operators, but not very useful
without context yet.
* Fix refresh issue with image window header + editmode.
* Fix drawing of shadow mesh for image painting.
* Remove deprecated uiDefMenuButO and uiDefMenuSep functions.
* Remove keyval.c, code is in wm_keymap.c already.
* Rename WM_operator_redo to WM_operator_props_popup.
RNA
* Added the relevant active_*_index properties, with proper
get/set/range, updates and notifiers.
* Context.tool_settings.
* ToolSettings.vertex_group_weight.
Operators
* MESH_OT_uv_texture_add/remove
* MESH_OT_vertex_color_add/remove
* MESH_OT_sticky_add/remove
* OBJECT_OT_vertex_group_add/remove/assign/remove_from/
select/deselect/copy/copy_to_linked
* OBJECT_OT_shape_key_add/remove
UI
* Some updates and cleanups in list template code.
Known issue: when going in & out of editmode, uv textures and vertex
colors dissappear. I thought me->edit_mesh would be NULL when not in
edit mode but it is not?
Search Menu: added feature that on opening, it shows the
current ID block, and selects it. Same can be used for other
searches, just pass on pointer to active item for the search
callback.
Also fixed arrow triangle draw for search.
* Search popup + autocomplete for bones, vertex groups, etc. This
is done with layout.item_pointerR, specifying an RNA collection to
take the items from. Used by constraints and modifiers.
* Some tests with the List template, ignore those for now..
check Save Image or Export PLY operator for example.
Also these code changes:
* Added some RNA collection iterator macros to simplify code.
* Fix bpy.props.BoolProperty not working correct.
* Merge uiDefAutoButsRNA/uiDefAutoButsRNA_single into one.
* RNA_struct_name_get_alloc function to get the name from a
pointer, instead of having to deal with name property.
* CTX_data_pointer_get_type to get data from context with
a check for the RNA type.
Medium sized Color Picker; consisting of number sliders, row buttons to
select rgb/hsv/hex, HS circle and V slider. It opens persistant, like
old picker.
This one opens default, other two can be accessed with ALT or SHIFT click.
On todo;
- eyedropper tool back
- method for click-drag to make mini picker appear
Note for UI coders (brecht :), added a UI_HIDDEN flag in buttons, to
support switching buttons in menus. Hidden buttons are not activated nor
drawn.
* Make Directional Order menus the default again.
* Scale up contents panels that do not use layout system.
* Fix for enum size and uncesseray colon in some cases.
* For item_menu_enumO, show icons if specified in RNA in
the menu (e.g. in the add modifier menu if there were
icons specified).
Logic editing back!
Test screenie:
http://download.blender.org/institute/rt9.jpg
I gave the buttons a bit more width, added nicer linkline draw.
Not working yet:
- theme colors for sensor/actuator types (was old button colors)
- moving sensors up/down (used bad pupmenu... better is icons like
used for modifiers)
- Linkline mouse-over select. Currently deleting a link goes by
drawing the same line again.
Needs to be fully tested for functionality too, leave that to the GE
department. :)
I noted there's bad button hacking with reading button values,
like check_state_mask(). uiBut structure was not meant to be exported
outside of interface module.
Revert revision #20879:
Enable non reordering menus option, it was disabled without explanation (?).
This changed the order of all header menus with the header at the bottom,
this doesn't seem acceptable to me. Additionaly, it doesn't make sense to
me that this would be the same option as the toolbox shape, they should be
separate options.
Here's the rationale from 2005 by Ton:
I didn't add the commenting out of correcting pulldown menu order, which
is based on location of the originating button in the UI. This uncommenting
didn't solve anything, since button definitions itself can be flipped too.
(Example: the data brose menus in top bar need to be corrected).
I can imagine the order flipping is sometimes annoying, but it still has
reasons to be there;
- the most important / most used items are always closest to the mouse.
(like opening properties panel, or "Add new" for material.
- it follows muscle memory and 'locus of attention' (mouse position).
- menus are configured to open to the top for bottom headers, and to the
bottom for top headers. We can expect the UI is configured consistantly
for headers, so in general the menus will appear consistant as well.
Where menu flipping fails is especially for alphabetic listings, like in
the menu button of fileselect. However, that one should be configured to
open by default to the bottom, so ordering is consistant as well.
* Added option for panel to be closed by default.
* Added support for RNA property and enum icons in buttons.
* Remove some deprecated RNA menu code.
* Fix issue with newly created panels not being inserted in the
right place.
* Fix issue with 3-split layout not being divided correctly.
* FIx issue with menu items not drawing correct using python UI.
Quick Color picker alternative!
- only a color circle + value slider
- exits immediate after use, or slight mouse move outside picker
- use scrollwheel to change HSV 'value'. Also works while picking.
- added nicer AA'ed cursor in picker
- All color swatches change 'value' on ALT+Wheel mouse-over
Old picker is still there, under SHIFT+click on swatch. Needs
evaluation... part of UI keymap? Per button type? Or divide
picker in left/right? Or just have all those old picker buttons
in another panel... I'm not to fond of this giant old popup.
First version of search-based ID browsing. Now only in use for the
top bar screen/scene browse. The python buttons will follow.
Also made search button colors match the theme colors from menu back.
Todos for browse-search:
- "Add new" will disappear, and become a separate icon button in the
row of widgets (like X, delete).
- Drawing the preview icons in menu
- Make search menu dynamic, with configurable number of items? And/or
multi-collumn... for now it's static
- Search menu should popup with last active ID visible and selected
Preview renders:
- Added proper button type (BUT_EXTRA) for preview buttons, to
handle drawing better. It now first draws an alpha mask, to
ensure the preview is correctly fitting inside the widget style.
It then draws the outline.
- Added protection for executing preview renders while regular
rendering, that's not going to work...
* Accept None as NULL pointers through python function calls.
* Added type callback for pointers back, it's useful still in
some cases. Made Object.data editable using this, the pointer
type varying based on object type.
* Wrap pin ID pointer in buttons space.
* Added subclasses for text and surface curve ID blocks, to
organize data better and get proper icons.
* Added RNA_type_to_ID_code and ID_code_to_RNA_type functions.
* Update RNA_access.h with new RNA types.
Nice goodie: Preview renders!
- Added new preview.blend, allowing super wide cinemascope previews
- Draws nicely blended inside widget type, rounded corners
- Preview now renders using all available cpus/cores.
- Uses - hopefully rock stable - method, which doesn't copy or
allocate anything for previews, but just uses render API calls.
- Multiple previews are possible! But, added provision in Jobs
manager to only render one preview job at a time. If you start
more preview jobs, they're suspended until it's their turn.
Bugfix: new buttons context code crashed when going full-window.
Tweaks are still needed for notifiers. I have to figure out still
how to retrieve SpaceButs button view types...
Further work on new "text search" button.
- Now allows to browse items (mouse, arrow key)
- Assigns active value
- Uses different backdrop to distinguish from popup menus
- Cleaned API for it, so it can be used nicely generic
Also added a search menu, which shows all currently working
operators: CTRL+ALT+F. (mind the looks, it needs some tweaks!)
To make a menu activating a button I've added a new event...
could use some tweaks.
Important note: the callback to pass on "old string" for text
button (bone rename) couldn't work yet, added first code for new
callback, but has to be worked on further. When bone rename gets
added it can be tested.
* Make modifier and constraint templates use left/right alignment for
buttons in the header.
* Added mdef bind operator as an example of how to use local context
for a modifier, and add some code I forgot to commit last time to
make this system actually work.
Part one of new text button type: SEARCH_MENU
This opens a popup showing all matches for a typed string, nice
for object names, materials, operators, and so on.
Warning: Currently menu doesn't function yet! Only draws choices.
As test I've added an operator search button in top bar. It only
shows operators that can be used in this context now. Also that
is part of the WIP, tomorrow more fun :)
Added a system for adding a "local" context in a UI layout.
This way you can define for example within a modifier panel
all operators to get the modifier in the context.
In the layout code:
uiLayoutSetContextPointer(layout, "modifier", &ptr)
layout.set_context_pointer("modifier", md)
In the operator:
ptr = CTX_data_pointer_get(C, "modifier")
md = context.modifier
* Added Constraints template and Add Constraint operator.
* Added toggle=True/False parameter to uiItemR, to get a
toggle button (actual button) rather than an "option"
button (checkbox)
* Added OPTION/OPTIONN button type, to distinguish with
TOG/TOGN.
RNA:
* Make all modifier pointers editable, including correct updates.
* Added notifiers and updates to constraints.
* Fix a stack corruption, pointed out by Andrea, and potentially
causing crashes.
* template_modifier creates the modifier box, and returns a layout
to put the buttons in.
* Only the armature modifier is now done with python code, all other
modifiers use C code. To convert a modifier to python, remove the
corresponding C code and create a function in DATA_PT_modifiers.
* Some modifiers still require some RNA work to get it working well,
especially to make pointers editable. Mostly that is a matter of
defining an own _set callback and put some of the modifier C code
into it.
* Still various buttons that don't work, like for hooks or mesh
deform binding.
* Fix for crashing decimate modifier (still disabled).
* Removed UI_BUT_NO_HILITE, HMENU.
* Make uiLayoutBox work with align.
