Aim was to get a total refresh of the animation system. This
is needed because;
- we need to upgrade it with 21st century features
- current code is spaghetti/hack combo, and hides good design
- it should become lag-free with using dependency graphs
A full log, with complete code API/structure/design explanation
will follow, that's a load of work... so here below the list with
hot changes;
- The entire object update system (matrices, geometry) is now
centralized. Calls to where_is_object and makeDispList are
forbidden, instead we tag objects 'changed' and let the
depgraph code sort it out
- Removed all old "Ika" code
- Depgraph is aware of all relationships, including meta balls,
constraints, bevelcurve, and so on.
- Made depgraph aware of relation types and layers, to do smart
flushing of 'changed' events. Nothing gets calculated too often!
- Transform uses depgraph to detect changes
- On frame-advance, depgraph flushes animated changes
Armatures;
Almost all armature related code has been fully built from scratch.
It now reveils the original design much better, with a very clean
implementation, lag free without even calculating each Bone more than
once. Result is quite a speedup yes!
Important to note is;
1) Armature is data containing the 'rest position'
2) Pose is the changes of rest position, and always on object level.
That way more Objects can use same Pose. Also constraints are in Pose
3) Actions only contain the Ipos to change values in Poses.
- Bones draw unrotated now
- Drawing bones speedup enormously (10-20 times)
- Bone selecting in EditMode, selection state is saved for PoseMode,
and vice-versa
- Undo in editmode
- Bone renaming does vertexgroups, constraints, posechannels, actions,
for all users of Armature in entire file
- Added Bone renaming in NKey panel
- Nkey PoseMode shows eulers now
- EditMode and PoseMode now have 'active' bone too (last clicked)
- Parenting in EditMode' CTRL+P, ALT+P, with nice options!
- Pose is added in Outliner now, with showing that constraints are in
the Pose, not Armature
- Disconnected IK solving from constraints. It's a separate phase now,
on top of the full Pose calculations
- Pose itself has a dependency graph too, so evaluation order is lag free.
TODO NOW;
- Rotating in Posemode has incorrect inverse transform (Martin will fix)
- Python Bone/Armature/Pose API disabled... needs full recode too
(wait for my doc!)
- Game engine will need upgrade too
- Depgraph code needs revision, cleanup, can be much faster!
(But, compliments for Jean-Luc, it works like a charm!)
- IK changed, it now doesnt use previous position to advance to next
position anymore. That system looks nice (no flips) but is not well
suited for NLA and background render.
TODO LATER;
We now can do loadsa new nifty features as well; like:
- Kill PoseMode (can be option for armatures itself)
- Make B-Bones (Bezier, Bspline, like for spines)
- Move all silly button level edit to 3d window (like CTRL+I = add
IK)
- Much better & informative drawing
- Fix action/nla editors
- Put all ipos in Actions (object, mesh key, lamp color)
- Add hooks
- Null bones
- Much more advanced constraints...
Bugfixes;
- OGL render (view3d header) had wrong first frame on anim render
- Ipo 'recording' mode had wrong playback speed
- Vertex-key mode now sticks to show 'active key', until frame change
-Ton-
Important notes:
- Full compatibility with old text objects not fully restored
(word spacing will be 0.0, need to set it manually to 1.0), will
either need version upgrade to 238 or a hack. Will check.
- lorem.c (about to be committed) contains BF copyright notice, but as
BF did not exist a few hundred years ago, probably best to remove it :)
- If you notice any cross-platform issues (especially beloved windows),
please report
- A few tiny warnings left, I will fix those issues still.
The rest has been said already - so have fun testing. And please do!
=== Reminder:
=== Documentation at http://blender.instinctive.de/docs/textobject.txt ===
Proportional edit:
- Proportional mode added to header as button/menu. Including new option
to have only connected geometry influenced.
- Added icons for proportional & proportional modes
- Make proportional edit data part of Scene, so all gets saved.
The Global flag G_PROPORTIONAL was removed
- Made sure #defines get used properly, also tweaked order for proportional
so it starts with regular 'smooth' by default.
- Use ALT+O in editmode to switch to new proportional 'connected' mode
Other UI stuff:
- in EditMode, the layer buttons get hidden... the amount of icons in
3d header grows to fast. :)
- made less ugly icons for the Manipulators. Still can be better.
- Added alpha-filter for pre-processing Icon-image, giving nicer display
of icon-antialising on dark or bright backdrops
- disabled Manipulators when in editmode, and current layers don't show
the edited data.
- Added the value used to define Normal size (editmode draw) in Scene too,
so it gets saved.
Works as follows;
- press the 'show bake settings' button (no space left... :)
- define start/end frame for bake, and an interval step.
The baked result interpolates nicely (Bspline, 4 keys) so in general a
step size of 2 or 3 still gives OK results.
- Press "BAKE". This will do a full animation + playback. Press ESC if it
you don't want it.
Once Baked, the BAKE button becomes a FREE BAKE. As reminder the softbody
buttons get blocked with error() menu.
This saves OK in a file. Renders any frame, including fields and moblur.
You can also set a "Timeoffs" for the softbody. And yes, this should be
in the NLA once... :)
NOTE! With this commit, files saved with the old (first commit) version by
Jens Ole won't read the settings back... he stored all sofbody variables in
Object, which was moved to a new struct when I did my first commit on SB
(over a month ago)
Also note that I moved particle deflecting & softbody to a new include.
Added in Nkey panel (transform properties) option to show in editmode
at choice the global or local coordinate values.
Same option works for the "Tech draw" options. :)
values that change during transform().
For the rest drawing sticks to actual selection, making the view quite
less cluttered. Hope this gets approval. :)
further loss of Hos' hair during tuhopuu merges.
This doesn't change any user functionality. 'Mode' can be
GL_LINE_LOOP for a circle outline (as it currently is), GL_POLYGON
for a filled circle, or whatever gl mode you like.
- Added new (Particle) Deflector; type Wind.
Wind gives constant directional force. It is animatable (Ipos) and reacts
to Object scaling. Also uses FallOff. Works for particles and SoftBody
quick movie check; http://www.blender.org/bf/0001_0250.avi
test file is in download.blender.org/demo/test/wind_soft.blend
- Added MaxDist option for forcefields, to control its influence better.
Is drawn as circle in 3d window.
Forcefields are a bit weak still... should react to scaling, or not; in
that case drawing should indicate it (done for spherical field now).
to determine if element should be drawn and to set draw options),
which meant some could be combined - eases implementation of new
DerivedMesh types and keeps more app specific logic out of DerivedMesh
implementations.
- removed DL_MESH displist type!!!! Now store a DerivedMesh directly.
- May still be some issues left having to do with releasing this
at the right time (old code just splashed free_displist all
over the place).
implementations (slightly redundant, could implement draw in terms
of first... can be cleaned later)
- switch to use of new APIs... all uses of EditVert->ssco are now
clean (read: ready to die as soon as a proper DerivedMesh implementation
is swapped in with ccgsubsurf)
implementations
- updated drawobject selection code to use DerivedMesh (last DispListMesh
usage in drawobject.c that needs to be replaced! Woot!)
- interface could still be a lot cleaner, mostly calculating indices for
the various things to pass to selection color routine is hacky.
- Switch to using DerivedMesh interface for draw_mesh_object.
- Code builds a "fake" DerivedMesh for Mesh/EditMesh which ends
up making code a lot clearer.
Plenty of work to be done - the DerivedMesh is still very specialized
to how the code draws which means it is not a very general interface
and is a little messy. Should work though I hope.
into drawobject.c (just used for calculating weight
map)
- removed two_sided (replace with glLightModeli calls)
- huge rewrite of drawobject.c for meshes, extracting simple
drawing functions and then reworking to bring some order
and clarity back to the code.
A lot was changed here so it is likely I missed a few
things in testing although I tried to be very careful.
Please let me know if you find any changes in drawing.
- center of rotation for camera in cameraview rotate has to remain the
camera center itself, drawing the dashed helpline then doesn't work,
since it's behind the camera clipplane. Just disabled that line.
- made MMB switch for cameraview grab to become quadratic, for a dolly
this feels OK, and makes it possible to move in small and large scenes.
- restored SHIFT modifier for translation and scaling. This based on old
convention that allowed precision editing on top of the transform you
already applied before pressing SHIFT.
Solved it with a new flag (T_SHIFT_MOD), since the G.qual cannot be
used. Transform() innerloop has to detect the SHIFT event itself.
Also coded it with storing the mouseposition while SHIFT event happened.
Hope Martin can approve! :)
- Martin's last commit made Manipulator Translate not work, it passed on
a zero translation to the constrainter, causing NaN's. Nicely catched the
exception.
- Fixed 'Trackball' to accept number input too
- 4th rotation widget styling, activate with Scene buttons, Anim panel, "rt"
on "4".
- drawing constraint lines replaced with widget compatible styling.
(functionality unchanged)
Fix;
- click on center for Rotate widget didn't switch to local/normal in all
cases
NOTE: BLI_winstuff.h was meant to be a wrapper around windows.h to handle
undefining various crap that windows.h defines. Platform specific headers
should only have to be included in a few places. This reduces the number
of inclusions of BLI_winstuff.h to 16 which is a much more reasonable
number (than the 144 or whatever it used to be)
To use; press the (temporal) icon in header. Switching widget types is by
pressing G, R or S once, if current widget type is different it switches,
otherwise it goes to normal Transform().
Widgets need a bit test for picking accuracy, correct drawing etc.
The rotate widget has a center button for 'trackball' rotate. That latter
can also be used for hotkey-based rotate.
In current code, all widgets remain in "Global" space, also in editmode.
Also widget updates while using normal transform has to be done.
2 Bugfixes:
- rotate in PoseMode had error for 2d 'around' center
- transform in postemode could crash, due to typo (& or |)
Silly 2.36 bug! In FaceSelect mode, other solid objects didn't show. Bad!
Additional; when using Halo material, and setting 'X Alpha', and disabling
Halo option, the 'Only Shadow' option turned on... uses same bit...
No time for real fix here, so for now the bit is always cleared after
disabling Halo.
- fixed warnings in compile (transform.h struct defines)
- drawPropCircle was on wrong location in editmode
- removed prop circle drawing for old transform (sorry, but we're going to
move soon anyway!)
- removed spaces from transform.c
It used to be a simple hack, scaling lens with 100, and moving the camera
to the back with an equivalent amount.
Because of the hack, making it 100% compatible with older files I could not
achieve (yet?). To help reminding users, I've added a print when reading
old files with Ortho cameras.
Full description of how it works can be found here;
http://www.blender3d.com/cms/Render_changes.515.0.html
Cleaned code somewhat (half the size!) and applied some changes:
- made it compatible with selection flags for new mesh editing (edge/face)
- renamed 'face angles' to 'edge angles' and made it display angles for
2 selected edges too
- removed the confusing convention that always drawed the info if one
of the vertices of edge/face/angle was selected. now it only displays on
minimum of 1 full edge or face selected.
- made it react to "zbuf occluded selection" option (for zbuffered text)
- made it also colorize text for white theme color (TH_TEXT)
On larger meshes this info still draws very confusing. The idea of displaying
the info on 1 vertex selected was probably to show values while grabbing,
although that didnt really work for angles. One idea could be, for transform,
that it draws all lenghts/angles/areas that get changed during transform
All in all, still useful addition tho!
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
